2007 A1226 Macbook Pro: Fans out of control, will not shut down, and temp sensors have gone offline.

So my MBP, just an hour or so ago, failed to shut down.  I click Apple->Shut down, but the computer instead restarts and while loading OS X, gives me an error that says "You restarted your computer because of an error."  The fans are maxed out right now, there is -no- process causing thisl  Also, I use iStatMenus to monitor my temperatures, and all of the CPU sensors have gone offline, iStat is only reporting temps for the hard drive and battery.
iStat also seems to have lost the ability to control my fan speeds.  Uninstalling and reinstalling iStat did nothing.  Resetting PRAM and the SMC have done nothing either.  Any ideas? 

To start up your computer in Apple Hardware Test:
Press the power button to turn on your computer.
Press and hold the D key before the gray startup screen appears. If Apple Hardware Test does not start up, see the Additional Information section at the end of this article.
s
p
o
i
l
e
r
a
l
e
r
t
Additional Information
Apple Hardware Test is included on the DVDs that are shipped with some Macintosh computers. If the copy on your hard drive becomes unavailable, use the DVDs to run Apple Hardware Test.
For Intel-based Apple computers that shipped with Mac OS X v10.5.4 or earlier, Apple Hardware Test is located on the Mac OS X Install Disc 1 and should be included with your computer.
For Apple computers that shipped with Mac OS X v10.5.5 to 10.6.7, Apple Hardware Test is located on the Applications Install Disc 2 and should be included with your computer.

Similar Messages

  • Macbook Pro will not shut down AND other issues...

    Macbook Pro will not shut down. Not using the POWER button, not using control/alt/command/esc, not using force quit, and obviously not by selecting Sleep or Shut down from the Apple menu.
    Force quit will not even pop up when selected.
    Top row keys do not work either, have gone into settings and switched them to F keys and back again, no luck.
    iPhoto will not import photos and will not shut down, gives me a message stating it is importing photos (nothing is connected to computer though). Baffling.
    HELP! Computer is only a month old
    Thank you everyone xx

    Please make a Genius Appointment and take it in for service.

  • While on Macbook Pro went to line bars now will not shut down and the only thing on the screen is the line bars. Help

    While on mac the screen went to line bars and now that is all that you can see. It will not shut down. Pulled battery ans left it out for 3 hours. put it back in and it is still on the line bars.

    http://support.apple.com/kb/HT1808

  • Mac Book Pro (OS 10.4.11) WILL NOT SHUT DOWN UNLESS FORCED! STILL PERSISTS!

    My Mac Book Pro 15", 2.33 GHz, 3 GB memory - runninfg Mac OS X 10.4.11 WILL NOT SHUT DOWN UNLESS FORCED! HELP!!!
    When I use the SHUT DOWN command in the Apple Menu - programs close, the screen goes to a blue screen with a revolving time indicator and then remains that way until I FORCE SHUT DOWN by pressing the power button - then after a it makes the sound the screen goes black.
    I searched the forums and tried the suggested fixes: trashing these 2 .plist preferences and reboot.
    Reset your Energy Saver preferences.
    HD > Library > Preferences > SystemConfiguration > com.apple.PowerManagement.plist
    User > Library > Preferences > com.apple.systemuiserver.plist
    this worked for a couple of cycles then the problem retuned/
    Hey, Mac geniuses and wizards - what is going wrong with my macboo

    Have you ever waited and let it do it's thing? I was ready to force mine to quit the other day after waiting 2-3 minutes, and all of sudden, it shut down. I restarted it and then shut it down again. This time it was normal.
    Try this yet before doing an Archive and Install.
    1. Boot from your system CD, run Disk First Aid from your Disk Utility and repair your permissions.
    2. Use a utility like Onyx to clean your system cache out, including your kernel cache. The computer will restart slow right after that, but I keep rebooting the computer about 3 times in a row, and I'm back up to speed.
    -Bmer
    Mac Owners Support Group - Join us @ MacOSG.com
      Mac611 Mobile Mac Support - about.Mac611.com
       iTunes:MacOSG Podcast | YouTube.MacOSG.com
                       An Apple User Group 
    Have an iPhone or iPod touch? Enter Mac611.com in Safari on it for 'mobile Mac support.'

  • Mac Book Pro (OS 10.4.11) WILL NOT SHUT DOWN UNLESS FORCED! HELP!!!

    My Mac Book Pro 15", 2.33 GHz, 3 GB memory - runninfg Mac OS X 10.4.11 WILL NOT SHUT DOWN UNLESS FORCED! HELP!!!
    When I use the SHUT DOWN command in the Apple Menu - programs close, the screen goes to a blue screen with a revolving time indicator and then remains that way until I FORCE SHUT DOWN by pressing the power button - then after a it makes the sound the screen goes black. I have restarted the machine several times and run disk doctor from the start up disk - no problems are recognized. The problem started last night. I upgraded to Mac OS 10.4.11 today - hoping that the update would resolve the issue - NO LUCK! I keep trying to get a successful SHUT DOWN from the apple command - However I have not been able to get it to SHUT DOWN without forcing the power button. HELP!

    "... and run disk doctor from the start up disk"
    Please explain that one. Disk Doctor was part of Norton Utilities. NU is not supported by OSX and the faster you get rid of it the better. Boot from your Installer disk and run Repair Disk from Disk Utilities. An optional way of shutting down is holding down control-option-command keys and pressing the eject button. When you are having problems address the problem. Upgrading to a new OS version will not solve the problem.
    Wht you should try is running the 10.4.11 intel combo updater here:
    http://www.apple.com/support/downloads/macosx10411comboupdateintel.html
    Repair Permissions before and after.

  • I am trying to shut down my MacBook Pro but mail is preventing it from shutting down and it will not allow me to quit mail

    Does anyone know of a way to force quit Mail.  It is preventing me from restarting or shutting down my MacBook Pro running Maverick iOS 10.9.
    Thanks.

    itsKeef,
    You're having the same problem? Do you ALWAYS have to Force Quit Mail or will it sometimes just Quite when you select Quit? Which model MacBook Pro do you have (e.g., "15-inch Late 2011"), which version of OS X are you running and which version of Mail do you have?
    Clinton

  • MB Pro 13" 10.6.8 Will not shut down after force quit everythin

    MB Pro 8,1 OS 10.6.8
    Computer froze while Sophos Anti-Virus was updating. I force-quit everything. Finder would not restart. Used the Shut Down command from the apple menu, everything went well until I reached the background-picture-only stage of shutdown. It froze there and the power button is inop. Shows options to shut down or restart, but will do neither.
    IDEAS?

    Sometimes after an update, you may have to wait awhile for it to shut down. The other day I was about to force mine to quit after waiting around 2-3 minutes. Finally it shutdown. After rebooting, it's working fine now.
    You maybe just didn't give it enough time to finish what it was doing before shutdown.
    -Bmer
    Mac Owners Support Group - Join us @ MacOSG.com
      Mac611 Mobile Mac Support - about.Mac611.com
       iTunes:MacOSG Podcast | YouTube.MacOSG.com
                       An Apple User Group 
    Have an iPhone or iPod touch? Enter Mac611.com in Safari on it for 'mobile Mac support.'

  • MacBook Pro will not shut down properly

    MacBook Pro will not shut down properly. Gray screen appears with spinning gear but will not shut down completely.

    If you have more than one user account, these instructions must be carried out as an administrator.
    If you have an optical drive, make sure there is no disc in it.
    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ If you’re running Mac OS X 10.7 or later, open LaunchPad. Click Utilities, then Console in the page that opens.
    Step 1
    Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left.
    Enter "BOOT_TIME" (without the quotes) in the search box. Note the timestamps of those log messages, which refer to the times when the system was booted. Now clear the search box and scroll back in the log to the last boot time when you had the problem. Post the messages logged during the time something abnormal was happening. That time might be before or after the boot.
    For example, if the problem is a slow startup taking three minutes, post the messages timestamped within three minutes after the boot time, not before. If the problem is a system crash or shutdown failure, post the messages from before the boot time, when the system was about to crash or was failing to shut down. In either case, please include the BOOT_TIME message at the beginning or the end of the log extract.
    Post the log text, please, not a screenshot. If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message.
    Important: Some private information, such as your name, may appear in the log. Edit it out by search-and-replace in a text editor before posting.
    Step 2
    Still in Console, look under System Diagnostic Reports for crash or panic logs, and post the most recent one, if any. In the interest of privacy, I suggest you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if present (it may not be.) Please don’t post shutdownStall or hang logs — they're very long and not helpful.

  • Macbook will not shut down (bought new in June)

    I saw some other threads on this. Mine will not shut down and I have the latest software updates on Leopard, bought my 13 in. Macbook in June. I have run it a lot, so that it gets warm but seemed to work fine until I try to shut down. I'm really worried about this because I hate to have to force it to shut down by turning it off. I do not have that third party program installed that someone said he'd downloaded and had to remove to get it to work. I hope I don't have to uninstall what little I have installed, such as Intego firewall/antvirus/personal backup, Camino, Sunbird, Flip4Mac, Washing Machine, and Io programs by Time Cycles. I don't run any of those other programs much, mostly just Safari and just now an HP printer driver. I wonder if doing a lot of scanning using the HP printer driver is what caused the problem. I just downloaded the HP printer driver right before this happened, I think. But I really need that to work.
    My computer starts to hang when I shut it down and says it can't log out until I shut down something else, which is generally a program that is not even running. I wish this would stop; I'm not sure what to do about it or whether turning the computer off will hurt it. I don't know if I'm supposed to "zap PRAM" or something but I already did that for a different reason a few days ago and don't want to do that a lot.

    Thanks for your message. I actually just logged in to report that I solved the issue by going to Disk Utility / First Aid / verify permissions/ repair permissions.
    The problem was that the HP Officejet 7300 Series printer driver I had recently installed had all sorts of permissions wrong and they are now repaired. And the Macbook has now shut down properly twice in a row. I wonder if I should report that to HP?
    ** I wonder what damage if any I did by shutting off the computer using the power button two or three times in the past 24 hours when I needed to shut the computer down prior to repairing the permissions problem?*
    And I did see the Activity Monitor in the Utilities section on my own just prior to trying Disk Utility / first aid / repair permissions (the disk it self didn't need repair, supposedly). I don't really think activity monitor was going to help in this instance because I did shut down all the programs, but I'll be testing that utility in the future.
    I bet now would be a good time to hurry up and get Disk Warrior.

  • MacBook Pro will not shut down

    A principal at my district has a MacBook Pro 15-inch Early 2008 (2.4/2X1GB/200-5400/256VRAM/AG) running OS 10.5.8 that will not shut down. When shut down is chosen, the computer restarts instead of shutting down. It does not matter how shut down is chosen, whether it is from pull down menu, keyboard command, click on shutdown in the login menu, etc. I have tried resetting PRAM, SMC, starting up from a known good system, and run diagnostics applications (which turn up no problems). The only way to get the machine to tunr off is hold the power button down until it shuts off.
    The user complains it also gets very hot when he leaves it sitting open in sleep mode. I have not observed that particular symptom. It also tend to run down the battery faster than it should (battery check shows it to have 80+% of it's original capacity.) But Activity Monitor does not show any unusual activity.
    Any suggestions what I can try next to figure this thing out?
    Thanks.

    On occassion (like tonight) my MacBook Pro will not
    shut down - even when I attempt to force quit. Any
    suggestions?
    Happens here too, but very rarely. In my case it mostly happens late at night when OS X is supposed to run some internal maintenance jobs, maybe some of them do not allow a shutdown?
    Does holding the power button down for approx. 10 seconds work? If yes, then I would not worry about it. If no, there is something seriously odd and I would report it to AppleCare.
    Cheers,
    Uwe

  • HT3964 I just opened up my MacBook Pro after a few days of not using it and it was frozen. I turned it off and back on and all I see is a white screen, there was a file with a question mark flashing for a bit but I can't do anything, please help me!!

    I just opened up my MacBook Pro after a few days of not using it and it was frozen. I turned it off and back on and all I see is a white screen, there was a file with a question mark flashing for a bit but I can't do anything, please help me!!

    Jerricayoung,
    you have a 13-inch Mid 2012 MacBook Pro. It’s modern enough that it supports booting into Recovery mode. To do so, hold down a Command key and the R key as you start up. It should eventually show a Mac OS X Utilities menu. Select Disk Utility from that menu; when the Disk Utility window appears, select the bootable volume from the left-hand side of the window. (It’s typically called “Macintosh HD”.) When the volume is selected, some buttons will appear on the right-hand side. If it’s not greyed out, press the Verify Disk button; if it is greyed out, or if it reports on errors that it found, press the Repair Disk button. Once the verification/repair is completed, exit Disk Utility and select Restart from the Apple menu; that will restart your MacBook Pro in its normal mode. With luck, that will be enough to get you to your normal login screen, rather than the white screen.

  • My MacBook Pro (OS 10.7.2) will not load some sellers websites that bounce through yahoo.

    My MacBook Pro (OS 10.7.2) will not load some sellers websites that bounce through yahoo.  Other Macs on same network work fine.  I have reset Safari, tried other browsers, eliminated cookies..... to no avail.  All computers running 10.7.2.  I have reset Safari, tried other browsers, trashed out cookies.  This has me baffled.  My other macs running the same OS version work fine.  Flash is up to date and have done the current software update.  Any help please.  I have not blocked any sites and am administator for all machines.  I have tried signing in as Guest.  Nothing works. 

    After searching other users questions with related problem, I found that VirusBarrier 6 was the issue.  Reconfigured settings there and problem solved.

  • How does one continue to use Mail on the early MacBook Pro, Model 1,1, that is not upgradable to Lion?  I have been running iCloud on my iPhone (OS5) and iMac (Lion) along with the MacBook Pro (OS Version 10.6.8)

    How does one continue to use Mail on the early MacBook Pro, Model 1,1, that is not upgradable to Lion?  I have been running iCloud on my iPhone (OS5) and iMac (Lion) along with the MacBook Pro (OS Version 10.6.8) since November until now.  Mail will no longer download on the MacBook Pro and keeps asking for my password.

    Mail should still be usable with your machine - but you'll need to update the settings to conform to the requirements of your system. Check with your ISP (like ATT, etc.) for the settings that will work with your Mail. Once you've updated this, you should be able to email like before.
    For example, my ISP required that I go to Mail Preferences/Accounts and make sure the details conform to your email settings.
    I have no idea of what your ISP is or what the settings might be, but this is likely the source of the problem.

  • I bought 2 new memory card to 4 grams each - replace them in your MacBook Pro 13-inch but it will not turn on - If you are installing a card for 2 and one for 4 d all works - tell me what could be the problem

    I bought 2 new memory card to 4 grams each - replace them in your MacBook Pro 13-inch but it will not turn on - If you are installing a card for 2 and one for 4 d all works - tell me what could be the problem

    I assume that you have installed new RAM in your MBP.
    It would be helpful if you indicated the EXACT model/year MBP that you have.
    What the the RAM specifications that you are trying to install?
    Ciao.

  • My macbook pro will not shut down

    Hello,
    please help. I have a brand new computer - MacBook pro - 2.2 GHz, Intel Core i7, Mac OS X 10.6.7. When I bought it, I followed the onscreen instructions and "transferred" my old computer, 4 year old MacBook, onto the new one (my accounts, with all the documents, preferences, etc). Now, for some time, before getting my new computer, I had been experiencing problems on my old one: namely, it was not shutting down and I had to "force" it by pressing the switch. I should have known better than transferring the old comp's settings and accounts onto the new one. I didn't and now my new computer is also not shutting down. Does anyone know how to find where the problem is and how to eliminate it? Do I have to backup all, erase, and reinstall everything or is there a less drastic way to cure my afflicted computer?
    Thank you!
    P.

    Choose Force Quit from the Apple menu and close Outlook from there.
    (123063)

Maybe you are looking for

  • Taking print of more than one document at a time???

    Hi sap experts, Presently my client is taking print of one document at a time. Is there any process/system through which he can take print of more than one document at a time in a specified format by putting the document number range.   Regards, Sume

  • Macbook Pro Attached monitor looks fuzzy

    I just got a Macbook Pro last week. I had a Samsung monitor attached to my Mac Mini. I tried attaching the Macbook Pro monitor to the Samsiung monitor, but the display is looking a little soft. Suggestions? (Not buying an officla Apple Display that I

  • Methods in JSP (repetitive things)

    I had posted this question before but didnt solve me problem.Here I ask it again. I alway thought that JSP should be used for display purpose.In that what to do if some lines of code are repeated many number of times,and since I cant have a method in

  • "access denied" message on tomcat

    i have downloaded jakarta tomcat, set classpaths etc, set JAVA_HOME environment and CATALLINA_HOME environment. Catalina connects, but the J2sdk1.4.1_01 reads back in MSDOS "access denied". I have a personal firewall "Zone Alarm" and do not think it

  • CONTRACTS FOR SERVICE ACTIVITY MASTERS

    We have created contracts (Document type MK) with item category service. When creating a Purchase Requisition for the Service Activity Master, source determination is not done with reference to the contract. The contract number and line item number m