2007 B

Hi all,
we want to upgrade 2005 b to 2007 b ,we are currently using SBO 2005 B Pl-42.
but we are not having upgrade exe to upgrade to 2007 B.
We have 2007 B setup ,if we durectly run the 2007 B setup will it upgrade to 2007 b.
suppose we directly run 2007 b setup wchich is having servertools,server and client setup.will it upgrade the old version or it will installed newly sap 2007 b.
Thanks,
Neetu

Upgradetion 2005 PL 42 to 2007 PL 08 Because This is Error Free and Letest Patch of B1 2007 B.
1) Un Install the 2005 B (All Component (Server, Business One , Client)
2) install 2007 Server (Start Server Option)
    1) install Business 2007
    2) install Client
    3) Update Database
then Set The WH Excisebale and Location Excise Details.
if you used any System Varieable then Reset New System Variale. to PLD
Regard's
Nagesh (NKP)

Similar Messages

Cannot send email from Exchange 2007 to Exchange 2013

Hello Anyone,
Anyone can help? I've prepare MS Exchange 2013 already, for Migration MS Exchange 2007 and I got the issue.
My issue is I can't send email from Exchange 2007 to Exchagen 2013, but for Exchange 2013 can send email to Exchange 2007,
is my issue only internal email for external email both Exchange server is working fine.
Regards,
Eakkasak

Thanks for your reply, when I send email from Exchange 2007 to Exchange 2013 I'm get the error message below.
Delivery is delayed to these recipients or distribution lists:
Eakkasak Buajan
Subject:
This message has not yet been delivered. Microsoft Exchange will continue to try delivering the message on your behalf.
Delivery of this message will be attempted until 8/29/2014 8:30:29 PM (GMT+07:00) Bangkok, Hanoi, Jakarta. Microsoft Exchange will notify you if the message can't be delivered by that time."
I'm already tick "Exchange server Authentication" in the Default Receive connector properties of Exchange 2013"
I'm restart services and restart all Exchange Server but doesn't work.
Thanks,
Eakkasak
Sent by Microsoft Exchange Server 2007

Cannot send email from Exchange 2007 to Exchange 2013 - Coexistence

Existing Exchange 2007 SP3 1 MBX, 2 CAS/HT, 2 ET servers.
I have added an Exchange 2013 server with MBX/CAS role.
Email will flow from Ex2013 server no problem. Mail from Ex2007 systems cannot deliver to Ex2013 boxes, it dies in queue with a 4.4.7 expired message after issuing a delay message.
I can telnet to ports 25, 587,717,465,475, and 2525 from Ex2007 HT role to new Exchange 2013 server. I can send email from Ex2007 HT role server to new Exchange 2013 server using telnet to port 25.
A ‘get-mailbox’ from the Ex2007 HT role server returns the server and database properly on the test users on Exchange 2013 server.
The only strange thing I am seeing is from the Ex2007 systems, a ‘get-exchange server’ command shows the new Ex2013 server as role ‘16439’ which looks to perhaps be normal.
Why is email not flowing to the new users on Exchange 2013?

You should have exchange server authentication ticked in Default Receive connector in Exchange2007.
Exchange 2007 and Exchange 2013 in the same subnet/network. if not please check any spam agent running between the networks. Are you running antispam on Exchange2013 ?
MAS

Dunning Letter on Receivables Aging SAP B1 2007

You run the customer receivables aging report and double click a row on receivables aging report window. You highlight one row, there is no letter checkbox compare to SAP 2005 A. There is no Dunning Letter PLD as well. Therefore dunning letter report cannot be previewed.
Does this letter checkbox and dunning letter PLD is not available in SAP 2007 A?
Thanks,
Kay Chong

Hi,
the document [Changed Features as of Release 2007 |https://websmp101.sap-ag.de/~sapidb/011000358700000281062007E.pdf]says the following:
Dunning in Aging Report
Application Path: Financials u2192 Financial Reports u2192 Accounting u2192 Aging u2192 Customer Receivables Aging u2192 Customer Receivables Aging u2013 Details window
Availability: All countries
Used for: indicating the dunning level linked to the document/transaction and creating a dunning letter if required.
                         Availability in
                         SAP B1 2007 A or B    Functionality changed?
New installations        N/A                   No
Upgrading customers      All countries         No
So this functionality is only available for databases upgraded from an older release.
Regards,
Marcus

When i click on an excel or word file in 2007 the program begins to open but then an error message says There was a problem sending the command to the program

when i click on an excel or word file in 2007 the program begins to open but then an error message says There was a problem sending the command to the program.
i am using office2007 with windows7 premium home edition. i have checked file associations., all DDE settings. i have even tried this in safe mode. the same thing happens. please note once i see the error. i can then go back to the file click on
it a second time and it WILL open. AND i can open any file if i open excel and and find the file from there. i uninstalled and re-installed office 2007 from scratch. And i checked the compatibility mode (all un-checked) still the problem persisits. this is
a real PITA. anyone have any solution for this? Thanks
ken yanow

Hi,
Have you try to un-select the Ignore other applications that use Dynamic Data Exchange (DDE) setting?
Click the Microsoft Office Button, and then click Excel Options.
Click Advanced, and then click to clear the Ignore other applications that use Dynamic Data Exchange (DDE)
check box in the General area.
Click OK.
If the problem cannot resolve, the Run as administrator may selected.
Go to Office default install location: C:\Program Files\Microsoft Office\Office12.
Right-click EXCEL.EXE > Properties >
Compatibility tab.
Under Privilege Level, uncheck Run this program as an administrator
check box.
Best regards.
William Zhou
TechNet Community Support

Excel-2007 cannot connect to Oracle ODBC data source, Control Panel can.


I cannot make an ODBC connection from Exce-2007 to Oracle work. I am an expert Excel and VBA user (since 1994) and I have frequently used Excel to access ODBC databases, including Oracle (I have done this with Excel-2003 both with worksheet queries and have written VBA ADO-connection routines). And even though in Excel-2007 a worksheet ODBC query is supposed to be easier to create than in previous version of Excel, my connection fails. Any suggestions and all help are welcome and much appreciated.
DETAILS


1) What is my system? I am using Excel-2007 on Windows Vista x64 and Oracle server v.11g on my computer (all this is on my computer, no network issues).
2) Why use Excel with Oracle at all? I use Excel-2007 to access Oracle rather than Access-2007 (or any other application like TOAD, etc.) because I do engineering calculations with the data stored in Oracle. These calculations are easier done in Excel (I suppose that one alternative to this could be to use some sql or Access to get the data from the database, then store it as plain vanilla CSV file, then open this file in Excel, then do the math (the math involves complex optimisation algorithms), then save the results as CSV, then use some sql or Access to put the data back into the database. Howwever this does not strike me as a quick or neat solution. And after all Excel has been designed to access ODBC databases, so why not use it?)
3) What do I do in Excel-2007 that won't work? I create an ODBC link to Oracle that does not work. In Excel-2007 this is straightforward:

<ul>
<li>define an ODBC connection (Data tab --> From other sources --> From data connection wizard);</li>
<li>define a query on the worksheet -- that's it, this is all!</li>
</ul>

I start with creating an ODBC connection:
a) I choose an ODBC data source type: ODBC DSN
b) Excel-2007 displays the list of the available ODBC data sources. I see in it my Oracle database name and I select it.
c) Excel-2007 displays the Data Link Properties:
- the "Provider" has a list of the OLE DB drivers with preselected "Microsoft OLE DB Provider for ODBC Drivers". I keep this default selection.
- the "Connection" tab has a connection string "DSN=<my database name>" which I keep, it also has fields for the user name and the password, which I fill with the correct credentials.
- Finally there is a button "Test Connection", which when I click produces the following error message:
"Test connection failed because of an error in initializing provider. 
Unespecified error"

4) Additional food for thought:
a) In the above walk-through the only data, which I type, are the user name and password, everything else is selected from lists offered by Excel-2007, hence any possibility of typos being the cause of the problem can safely be discarded.
b) I can test the ODBC driver in the Control Panel and it shows that it can connect to the Oracle database:
- in Control Panel --> Admin Tools --> Data Sources (ODBC) on the "User DSN" tab I can see the list of the available ODBC data sources (same list as in Excel-2007, point 3b above) with the name of my database in it;
- selecting the name of my database from the list of the sources and clicking "Configure" button opens a tab with Data Source Name (same as in Excel-2007), TNS Service Name and User ID. I enter <user name>/<password> and click "Test Connection" button. A message "Connection successful" appears (just for a test I enter incorrect user credentials and "Unable to connect" message appears)
BOTTOM LINE


The procedure for using an ODBC connection from Excel is very simple, in the past I have created and used such connections numerous times with Excel-2003 and earlier on Win-XP and earlier. But now on Excel-2007 and Vista-x64 I cannot make it work.
Also, testing an ODBC connection driver is really easy and simple to be done in the Control Panel. There testing the same ODBC connection, which fails in Excel-2007, results in success.
I am frustrated by the simplicity of the problem and yet the persistant error. I have lost now two full days in failed attempts to make the simple procedure work and in searching the internet for answers.
All help is highly appreciated <img class="emoticon" src="images/emoticons/happy.gif" border="0" alt="" width="16" height="16" />,
Plamen


Did you find the solution to your problem?
If not, I think I may know.
Excel 2007 is a 32-bit application.
When installing 32-bit applications in a 64-bit environment, the "default" location is:
C:\Program files (x86)\...
Excel then launches from this location.
However, when it connects to Oracle and passes the name of the calling program, Oracle attempts to "interpret" the value of (x86) as if
the value within the parenthesis are being passed as a reference. Of course, iOracle doesn't find anything, so the result is (),
and then it cannot return the connection info back to the calling application.
I corrected it by installing Excel in C:\Program Files\, and once launched from that location, it works the same as on the 32-bit machines.
However, at my location, they are FORCING Excel to be installed in the(x86) location.
What I'm trying to discover now is:
Is it possible to flag Oracle to NOT process the embedded variables?
Or, is it possible to assign a variable in Oracle such that x86 = "(x86)", so that the end result is viable?
Have you had any luck with your installation?
thanks,
Paul

Excel 2007 and Smartview 11.1 file open slow

We are in the process of upgrading to HFM system 11.1 and smartview 11.1.1.3 and as part of this process we are starting to use Excel 2007. I am encountering an interesting problem when opening files in Excel 2007 using smartview 11.1 and I am wondering if any one else has seen this problem and found a solution.
First I converted an excel 2003 file to excel 2007 and saved the file as an xlsx file type. Then I am able to open the file and it would take about 30 seconds to open the file. The file has about 15,000 formulas on for spreadsheets. If I click on each spreadsheet individually and use the "Refersh" button I can save the file in about 10 seconds and then close the file. When I open the file again it will open in 30 seconds. Now using the same file I click "Refresh All" and the file processes fine. I am able to save and close the file in about 10 seconds. However, when I try to open the file again it takes about 20 minutes to open, and then 20 minutes to close.
This only happens with two or three files. I have another file that is 40 spreadsheets and about 3,000 formulas that is not affected when I click Refresh or Refresh All.
Any help would be apperciated.
Rich

Hi
On metalink i found some notes about this issure
"Background
SmartView communicates over HTTP using .NET. This just means that requests and responses are sent in a standard XML format that is tucked in the HTTP headers. The mechanism is the same as when your internet browser requests a file or submits a form (simplification). A standard Microsoft component that is part of Internet Explorer is used for this.
There are three components (four if you include the network) in a SmartView refresh:
-the client
-the web server
-the HFM application server
It is easiest to troubleshoot when they are on separate machines. (Running SmartView on the server to see whether it works better is a useful test to see what effect the network is having, but doesn't show any other bottlenecks.) If you run Task Manager on these 3 machines showing the Performance tab, you will see initial activity on the client as Excel clears the cells and the request is converted into XML. Then you see the web server get busy as it receives and parses the request. Then the application server is busy as it send the data, then the web server is busy as it compiles the results into XML again, and finally the client parses the XML, pushes the data into cells and runs an Excel calculation. This last stage is the longest of all. Overall, it is typical to see the client doing 90-95% of the work, so client performance is a very important factor. Look out for Excel's memory usage increasing and RAM becoming in short supply. Often, user dissatisfaction with refresh times can be alleviated by giving them more RAM or a faster PC.
The situation we are dealing with here, however, is when the chain of events described above is interrupted. In this case, you will see the client or the web server wait in vain for a response from the next machine in the chain. The case of invalid XML is similar, but the response is truncated so that the XML is not well-formed when it arrives. XML consists of matching pairs of tags and is not well-formed when a closing tag is missing. This can be caused by certain network settings such as packet size (see later). The end result in either case is the same: as Excel cleared the cells before sending the request, cells are left blank or with zeroes.
Your job now is to work out why the particular component is failing.
Client
Check the HTTP time out in the registry:
[HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Internet Settings]\
"ReceiveTimeout"=dword:00dbba00
"KeepAliveTimeout"=dword:002BF20
"ServerInfoTimeout"=dword:002BF20
The time-out limit is five minutes for versions 4.0 and 4.01 and is 60 minutes for versions 5.x and 6. Also, the time-out limit is 30 seconds for Windows Internet Explorer 7. To change the settings, add the above keys. The above values are hexadecimal, not decimal and correspond to 18000 milliseconds (3 minutes) and 240 minutes for the receive time-out. See
- http://support.microsoft.com/kb/813827
- http://support.microsoft.com/kb/181050
Once you make those changes, my recommendation is that you reboot the client machine.
Web server
Look for errors in logs showing that the web app didn't respond/disconnected or timed out waiting for another application (i.e. the HFM application server). Eliminate load balancers etc. during testing in order to isolate the problem and to ensure that the user always goes to the same web server otherwise, logs can be hard to interpret. See also the IIS Tuning Guide for IIS settings. We cannot recommend particular settings, as each client must establish the optimal settings for their own environment after performance testing. If necessary, engage the services of a suitably qualified consultant.
Application Server
HFM application server performance is very dependent on whether the data is already in RAM or not. One symptom, where the first refresh fails but the second one succeeds, is probably a sign that the cache needed to be populated and once that had been done (by the first refresh) it went faster. HFM loads whole subcubes (Scenario, Year, Value and Entity) into cache, so asking for lots of accounts in the same subcube is fast, but asking for lots of entities will inevitably slow things down as it runs out of RAM and starts unloading subcubes to make room for more. The HFM event log (HsvEventLog.log) shows this happening, but don't forget that the messages you see are a normal consequence of the way HFM works and are not a problem unless you see a hugely elevated number of them during the period the refresh occurs. Another sign would be page file thrashing.
If there are several servers in a cluster, use sticky sessions in HFM to make sure tests always go the same server, or hit one server directly rather than using the cluster.
Solutions here involve giving more RAM to the server (probably not possible because of the 2 GB limit) and changing the worksheet design to restrict the number of subcubes accessed. A separate consolidation server, so that reads are not competing with intensive consolidations and calculations, would be a good thing.
Network
To find out if packets get fragmented, use
ping -l size -f
to send a big packet with the 'don't fragment' flag. E.g.
Ping -l 1024 -f oracle.com
If you see a reply like Reply from 141.146.8.66: bytes=1024 time=200ms TTL=245 then the size you specified is below the packet limit of the network. But if you use, for example, 2000 in place of 1024, you get Packet needs to be fragmented but DF set, then you know you have exceeded the limit. Combine this investigation with a Fiddler trace (https://www.fiddler2.com/fiddler2/) to see what size data messages are being sent and received.
Troubleshooting Guidance
If you seriously want to go into this in more detail, then it will take a considerable effort on your and your IT Department's part. My general advice would be:
1. During this process, fix your environment so that it is predictable. Register a single HFM application server and connect to that. Use a single web server and don't go through Apache or any other redirector. Make sure we know which machine to go to for logs. This would be a temporary measure and it doesn't stop the other users using the full, load balanced system so long as it doesn't involve your server.
2. As far as possible keep other users from using it during testing, unless you are specifically testing for performance under load. We want to see what activity is due to SmartView and not random other jobs.
3. Use PerfMon on all three machines: client, web server and application server.
4. Clear Logs before testing and note the times of each test so the logs can be correlated.
5. Log CPU activity, memory usage, network throughput, page faults, thread count etc. I'm no expert on this so get advice from someone who is.
6. In addition to the performance logs, from the IIS Server get:
* HTTP.SYS Error Log - %windir%\System32\LogFiles\HTTPERR (Default location; configurable)
* IIS Website Log - %windir%\System32\LogFiles\W3SVC# (Default location; configurable)
* Event Log (both System and Application) in EVT and TXT (tab separated) formats
7. From HFM Application server get:
* HsvEventLog.log (in <HFM install>\Server working Folder)
* Event Log (both System and Application) in EVT and TXT (tab separated) formats
8. Be aware of all timeout settings in your environment (i.e. IIS & the network) and time your tests. This can show whether it is an ASP timeout, script timeout, client side timeout or whatever. Note that the Web Session Timeout setting for SmartView in HFM's Server and Web Configuration is a separate issue from IIS timeouts. Web Session Timeout controls the length of idle time before SmartView makes the user log in again. Default 20 mins.
9. Run Fiddler traces to directly observe the XML and check for HTTP failures.
Further resources
- Tuning IIS 6.0 for HFM
- SmartView Performance FAQ
Both are available from Support.
Author: Andrew Rowland
Version: 11.x (Fri, 30 October 2009)"
regards
Alexander

Hoping for some help with a very frustrating issue! I have been syncing my iPhone 5s and Outlook 2007 calendar and contacts with iCloud on my PC running Vista. All was well until the events I entered on the phone were showing up in Outlook, but not

Hoping for some help with a very frustrating issue!
I have been syncing calendar and contacts on my iPhone 5 and Outlook 2007 using iCloud 2.1.3 (my PC is running Vista). All was well until the events I entered on the phone were showing up in Outlook, but not the other way around. I’ve tried the usual recommended steps: deselecting calendar and contacts in the iCloud control panel and then re-selecting, signing out of the panel and back in, and repairing the Outlook installation in control panel. I even uninstalled iCloud on the PC and downloaded it again (same version).
The furthest I’ve gotten is step 2 (and once, step 3) of 7 while performing “Outlook Setup For iCloud.” At that point I get, “Your setup couldn’t be started because of an unexpected error.” After the first attempt at all this, all my calendar events disappeared from Outlook, although they are still in iCloud calendar and on my phone.
Sound familiar? Any ideas on how to solve this iCloud/Outlook issue? Thanks much in advance!

Hoping for some help with a very frustrating issue!
I have been syncing calendar and contacts on my iPhone 5 and Outlook 2007 using iCloud 2.1.3 (my PC is running Vista). All was well until the events I entered on the phone were showing up in Outlook, but not the other way around. I’ve tried the usual recommended steps: deselecting calendar and contacts in the iCloud control panel and then re-selecting, signing out of the panel and back in, and repairing the Outlook installation in control panel. I even uninstalled iCloud on the PC and downloaded it again (same version).
The furthest I’ve gotten is step 2 (and once, step 3) of 7 while performing “Outlook Setup For iCloud.” At that point I get, “Your setup couldn’t be started because of an unexpected error.” After the first attempt at all this, all my calendar events disappeared from Outlook, although they are still in iCloud calendar and on my phone.
Sound familiar? Any ideas on how to solve this iCloud/Outlook issue? Thanks much in advance!

How can I filter a Sharepoint 2007 libarry list based on current user login?

Hi all.
I would like to know how I can filter a SharePoint library list based on current user login.
Suppose I have created the followings:
1) A SharePoint form library containing bunch of uploaded InfoPath form data.
2) The InfoPath form template contains a promoted text field called "TargetUser" to store user domain login (ex: DOMAIN\JOE) and every InfoPath form file in the library has a valid domain name stored in the "TargetUser" field.
I have created a custom view for the form library and would like to filter this view so only items whose "TargetUser" field matches current user's login ID are displayed.
I went to Edit View page to customize the view and tried to use the [Me] function but I got a "Filter value is not a valid text string" message instead when clicking OK. Apparently [Me] returns a Person/Group data type and the filter cannot compare its value
to that of "TargetUser".
I tried using text functions (ex: TEXT([Me],"") hoping to extract default string value from [Me]. The filter accepts the parameter without any error but the resulting fitlered list does not display any items at all.
I have googled this subject for hours but I have not found any solution.
It would be greatly appreciated if anyone can help me to create a functional filtered list.
FYI, my SharePoint 2007 installation is just WSS 3.0 + Form Server. I do not have MOSS 2007 (so no MOSS 2007 web parts or web services).
Thank you.
Jason

Here's what I usually do in order to accomplish this. Ultimately you'll need to have 2 different fields. There's the one you already have, with DOMAIN\username stored in it. Then you'll need an additional field as a "person" column type.
Call it "TargetPerson" or something.
Create a sharepoint designer workflow that runs each time an item is created or changed. One action:
Set FIELD to VALUE.
The first FIELD is "TargetPerson", the VALUE is your "TargetUser" field.
Once this is done, then the person value is stored in the person field. This is the field that you can filter by "TargetPerson" is equal to [Me]
Laura Rogers, MCSE, MCTS
SharePoint911: SharePoint Consulting
Blog: http://www.sharepoint911.com/blogs/laura
Twitter: WonderLaura

How to get a Custom View in CRM 2007

Hi,
I have created a new view (SrvTLocation) and I want to replace Service Level Agreements view with the SrvTLocation.
In the old version, I followed this approach to get the location view
1. Add SrvTLocation to the SrvTViewSet under the view area "SrvTActionSLA".
2. Redefine the method "DO_REPLACE_INITIAL_VIEW" of the controller class of "SrvTViewSet", so that it will replace the "SrvTSLA" with "SrvTLocation"
I dont know how to do it in the new system.
Please advice me. I will reward points.
Sreekanth

Hi Sreekanth
Have you checked the new CRM 2007 Cookbook.
I believe it's available from SAP Marketplace. Haven't checked myself but do believe it's there.
Regards
Arden
Reward with points if helpful

Errors during upload of BP for CRM V1.2007!

Hi,
I have finished all the prerequisite steps for BP for CRM V1.2007 and get following error messages when upload:
/SMB20/GLOBAL_PARA_O99_C01     SMB20_CRM_GLOBAL_PARAM_01.TXT     VARIANT001     I_COUNTRY     Data does not exist in the PME table.(TDC: DC0 )
/SMB20/GLOBAL_PARA_O99_C01     SMB20_CRM_GLOBAL_PARAM_01.TXT     VARIANT001     I_CURRENCY     Data does not exist in the PME table.(TDC: DC0 )
/SMB20/GLOBAL_PARA_O99_C01     SMB20_CRM_GLOBAL_PARAM_01.TXT     VARIANT001     I_LANGUAGE     Data does not exist in the PME table.(TDC: DC0 )
I checked for OSS Notes and forum but couldn't find any help. How can i fix these errors?
Thanks and Regards ,
Vasu

Hi Vasu!
I have exactly the same problem. Have you found a solution yet?
regards,
Walter

If you format in Guid for Intel Macs, Apple partition for PPC Macs for Boot drives, then why do my PPC Hard drives Boot in my 2007 Mac Pro, what gives?

I recently purchased a 2007 Mac Pro for a song, swapped the CPU's for octo chipsets and proceeded to wait for new Hdd's in the mail. I was told the Hard drives in my old G5 would not be bootable unless they're in Guid format. Disc Utility confirmed to use the specific maps as well and yet all of my 2006 PPC Power Mac G5 Hard drives boot in my MP without a hitch, although a few none universal apps do not work. So what am I missing, does it really matter which Apple partion map to choose from or is this a fluke?...

all of my 2006 PPC Power Mac G5 Hard drives boot in my MP without a hitch
Yes, and what version of Mac OS are they booting?
>> They will boot the OS that is on them, but not a later one.

Can my macbook pro mid 2007 3.1 AA896ll/a handle a SSD and how do I make the switch. Can I do a clean install of Snow Leopard from an original cd

Here is my problem, I want to upgrade my macbook pro mid 2007 3.1 AA896ll/a to an Solid State Drive, a Crucial m4 256 gb, I want to know if the macbook will be able to handle it and how do I do the switch. also once I install the drive will I be able to boot from my Snow Leoard original cd and do a clean install. Thank you

Coming from a 5,400 RPM drive that's nearly filled up, fragmented and deoptimized to a fresh install of OS X on a SSD will of course be a improvement.
However fresh installing OS X on a new 5,400 RPM will also see a improvement, boot up in 30 seconds.
A fresh install of OS X on a new 7,200 RPM drive will also see a improvement, boot up in 25 seconds.
A fresh install of OS X on a new SSD will see the best improvement, boot up in 20 seconds on fast SATA connections.
OS X still requires time to setup and that takes about 20 seconds despite how fast your boot drive is, that's why sleep was created.
Things to consider: The higher cost of a SSD, the limiting capacity (hard drives hold way more up), the SATA I speed limitations (slows up on large file transfers), the difficulty to scrub the SSD of unwanted data (like you can a hard drive), and it's limited write capability. Also the smaller SSD's are faster than the larger ones.
SSD's are shock proof, which is their slight advantage over hard drives.
I see a 120GB SSD in a SATA I machine as being a waste, it's too small of a storage space (500GB+ is ideal), the SATA I connection is slow and other factors that make a 7,200 RPM drive a better option in that machine.
One can get a 750 GB 7,200 RPM hard drive for about the same price and still maximize their boot time in the process, also being able to scrub their drive of unwanted data easily.
SSD's can't be scrubbed, one has to fill 50% of the remaining space with many, very small files to overwrite the free space, then do another 50% again to defeat the Trim/wear leveling as SSD's write to less used location each time. If one fills a OS X boot drive up completely, it won't function or won't boot up.
If you do this fill routine regularly with software, then you prematurely wear out the SSD as it has limited writes. Why Disk Utility doesn't offer zero or 7x erase for SSD's.
If your in the 10% of Internet traffic that's going to adult sites, then the ability to scrub the caches and storage drive of embarrassing unwanted data is a necessity. Especially in the light of software and hardware that can read the SSD of deleted data.
Trick links and redirects on poisoned sites can firebomb your Mac with some pretty bad pictures and your hidden caches as well, especially if you don't like to pay.
IT personal have at their disposal free open source forensic software that basically aggregates all the past behavior done on the machine into a nice, easy to view format with times, dates and when and where content was downloaded from.
Since one has to give up their password for repair folks to recover data and fix the machine...
I think a SSD is less of a benefit over a 7,200 hard drive for that particular model of Mac for a mere few seconds faster boot time.

Uppgrading Exchange 2007 from sp1 to sp3 on small business server 2008 sp1

Hello everyone
I know this topic has been discused many time in this froum. but i have to ask it again in my exact situation.
I have a realy unstable and unsafe server which i am planing to migrate all the apps and services to some virtual servers soon.
first migrating is Exchange. i have Exchange 2007 sp1 on my server sbs 2008. i have my DC,AD, dns, DHCP, File, etc on the same server as well . So that is way it is scary for me (as i am not really experienced) to even upgrade one service pack.
Now, i want to know if anyone did it before. What should i expect during upgrading or after that? so i can be ready for that?
which kind of backup can save me if somethings happens to my Exchange? is there any way to install the new Exchange 2007 and sp3 rollup 10 and then migrate all databases and mailboxes to that new server? if yes, how to do that?
Thanks
Nima

Hi Nima,
Ok, I know your concern. Please make sure you have read the above KB I provided before installing SP3 for Exchange 2007. What's more, you need to make sure you right mouse click and run as admin to install it.
Moreover, here is a thread about migrating Exchange 2007 SP3 to Exchange 2013 for your reference.
Migrate SBS 2008 R2 running Exchange 2007 to Windows Server 2012 Exchange 2013
http://social.technet.microsoft.com/Forums/en-US/4c9b96c2-fd5e-4fbe-8b3a-fb5b3ab29da8/migrate-sbs-2008-r2-running-exchange-2007-to-windows-server-2012-exchange-2013?forum=smallbusinessserver
Hope it helps.
Best regards,
Amy Wang
TechNet Community Support

Can I install a 1TB Hard Drive into a late 2007 17" MacBook Pro?

Can I install a 1TB Hard Drive into a late 2007 17" MacBook Pro currently running a 160 GB Hard Drive?

It depends upon exactly what you want to do with your Mac. My old Late 2007 17" MacBook Pro only has 4GB RAM and it works fine. It is a little slow if I am doing anything involving heavy computing (rendering video, compiling programs, etc.) but it works just fine. In most cases, the increased RAM will help performance, but the cost can be fairly high with an older machine like you have.

Floating fields and fragment subforms in Outlook 2007 do not display correctly

I'm using LCES Forms 8.0 Update 1 to render a non-interactive HTML forms using dynamic content (customer info). The email appears ok in clients except in Outlook 2007.
The Floating text and Text Fields appear multiple times on the form (scattered around their placement point on the form) and the subform fragments are appearing with borders surrounding them.
I have heard that there are issues with Outlook 2007 not displaying HTML correctly. Is there a way to setup the Text Fields/Subforms in Designer so they display correctly in Outlook 2007?
Thanks!

Create a new profile as a test to check if your current profile is causing the problems.
See "Basic Troubleshooting: Make a new profile":
*https://support.mozilla.org/kb/Basic+Troubleshooting#w_8-make-a-new-profile
There may be extensions and plugins installed by default in a new profile, so check that in "Tools > Add-ons > Extensions & Plugins" in case there are still problems.
If the new profile works then you can transfer some files from the old profile to that new profile, but be careful not to copy corrupted files.
See:
*http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

2007 B

Similar Messages

Maybe you are looking for