2014.4.1 stuck at Executing elaborate step ...

I have relative small design, about 3% of Kintex7-325t.
While implementation from scratch takes about 1.5hrs. Simulation seems to stuck at "Executing elaborate step..."
elaborate.log shows:
Vivado Simulator 2014.4
Copyright 1986-1999, 2001-2014 Xilinx, Inc. All Rights Reserved.
Running: C:/Xilinx/Vivado/2014.4/bin/unwrapped/win64.o/xelab.exe -wto 1cd677141e17408cacabe67d79cb63de --debug typical --relax -L fifo_generator_v12_0 -L xil_defaultlib -L blk_mem_gen_v8_2 -L xbip_utils_v3_0 -L xbip_pipe_v3_0 -L xbip_bram18k_v3_0 -L mult_gen_v12_0 -L unisims_ver -L unimacro_ver -L secureip --snapshot tb_Top_behav xil_defaultlib.tb_Top xil_defaultlib.glbl -log elaborate.log
Multi-threading is on. Using 6 slave threads.
Starting static elaboration
Completed static elaboration
Starting simulation data flow analysis
Completed simulation data flow analysis
I have no idea, what's going on. Tool setup seems to fine, since I can simulate dummy testing design.
Please advise how to troubleshoot this.
Thanks,

Thanks a lot for looking into my issue.
I am quite certain, my design source confused tool somehow; My project is messy uncompleted code base with a lot of critical warnings. But it implemented with some timing failure.
I was expecting just to get behavior simulation. I also reduced testbench to just one process of $display and clock generation.
I've tried 2015.1 same stuck. I was expecting to be able to pull a bit more info or trouble shooting log. Any verbose log?
But on the other side, simulation kicks off quickly in ModelSim.
Will keep investigating and share my finding here.

Similar Messages

  • Stucked during 37.th step when instaling  BI system

    When instaling  BI system I am stucked during 37.th step (Install software units.)
    What could be the reason? Should you need additional questions do not hesitate to ask.
    The message is :
    "An error occurred while processing service SAP NetWeaver 7.0 Support Release 3 > SAP Systems > MS SQL Server > Central System > Central System( Last error reported by the step :uncaught exception: nw.sdm.deploymentErrorWithLog: SDM deployment failed for at least one of the components to be deployed. SOLUTION: Check C:\Program Files/sapinst_instdir/NW04S/SYSTEM/MSS/CENTRAL/AS/callSdmViaSapinst.log for more information. (in script unknown, line 0: ???)). You may now
    choose Retry to repeat the current step.
    choose View Log to get more information about the error.
    stop the task and continue with it later.
    Log files are written to C:\Program Files/sapinst_instdir/NW04S/SYSTEM/MSS/CENTRAL/AS.
    In u201CView logu201D I have:
    ERROR 2009-07-09 00:00:35.671
    FJS-00003  uncaught exception: nw.sdm.deploymentErrorWithLog:
    SDM deployment failed for at least one of the components to be deployed. SOLUTION: Check C:\Program Files/sapinst_instdir/NW04S/SYSTEM/MSS/CENTRAL/AS/callSdmViaSapinst.log for more information. (in script unknown, line 0: ???)
    ERROR 2009-07-09 00:00:37.375
    FCO-00011  The step enableUsageTypes with step key |NW_Onehost|ind|ind|ind|ind|0|0|SAP_Software_Features_Enablement|ind|ind|ind|ind|5|0|enableUsageTypes was executed with status ERROR ( Last error reported by the step :uncaught exception: nw.sdm.deploymentErrorWithLog:
    SDM deployment failed for at least one of the components to be deployed. SOLUTION: Check C:\Program Files/sapinst_instdir/NW04S/SYSTEM/MSS/CENTRAL/AS/callSdmViaSapinst.log for more information. (in script unknown, line 0: ???)).
    The end section of u201CC:\Program Files/sapinst_instdir/NW04S/SYSTEM/MSS/CENTRAL/AS/callSdmViaSapinst.logu201D file is:
    Jul 9, 2009 12:00:29 AM  Info: Begin of log messages of the target system:
    09/07/09 00:00:13 -  ***********************************************************
    09/07/09 00:00:15 -  Start updating EAR file...
    09/07/09 00:00:15 -  start-up mode is lazy
    09/07/09 00:00:15 -  EAR file updated successfully for 63ms.
    09/07/09 00:00:15 -  Start deploying ...
    09/07/09 00:00:15 -  EAR file uploaded to server for 79ms.
    09/07/09 00:00:29 -  ERROR: NOT deployed. The Deploy Service returned the following error:
                         For detailed information see the log file of the Deploy Service.
                         Exception is:
                         com.sap.engine.services.rmi_p4.P4RuntimeException: Unexpected exception.
                              Nested exception is:
                              java.net.SocketException: Connection reset
                         java.net.SocketException: Connection reset
                              at java.net.SocketInputStream.read(SocketInputStream.java:168)
                              at com.sap.engine.services.rmi_p4.Connection.run(Connection.java:395)
                              at java.lang.Thread.run(Thread.java:534)
    09/07/09 00:00:29 -  ***********************************************************
    Jul 9, 2009 12:00:29 AM  Info: End of log messages of the target system.
    Jul 9, 2009 12:00:29 AM  Info: ***** End of SAP J2EE Engine Deployment (J2EE Application) *****
    Jul 9, 2009 12:00:29 AM  Error: Aborted: development component 'caf/eu/gp/ws/msosrv'/'sap.com'/'MAIN_APL70VAL_C'/'963790'/'5', grouped by software component 'SAP-EU'/'sap.com'/'MAIN_APL70VAL_C'/'1000.7.00.14.0.20071210153525''/'5':
    Caught exception during application deployment from SAP J2EE Engine's deploy API:
    com.sap.engine.deploy.manager.DeployManagerException: ERROR: NOT deployed. The Deploy Service returned the following error: com.sap.engine.services.rmi_p4.P4RuntimeException: Unexpected exception.
         Nested exception is:
         java.net.SocketException: Connection reset
    Exception is:
    com.sap.engine.services.rmi_p4.P4RuntimeException: Unexpected exception.
         Nested exception is:
         java.net.SocketException: Connection reset
    java.net.SocketException: Connection reset
         at java.net.SocketInputStream.read(SocketInputStream.java:168)
         at com.sap.engine.services.rmi_p4.Connection.run(Connection.java:395)
         at java.lang.Thread.run(Thread.java:534)
    (message ID: com.sap.sdm.serverext.servertype.inqmy.extern.EngineApplOnlineDeployerImpl.performAction(DeploymentActionTypes).DMEXC)
    Jul 9, 2009 12:00:29 AM  Info: Starting to save the repository
    Jul 9, 2009 12:00:31 AM  Info: Finished saving the repository

    Hi
    Check this [Link|https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/dc49a7fb-0701-0010-88bf-f45221a97d15?overridelayout=true]
    btw what is the JDK version installed ?
    Regards
    Uday

  • Ipod touch is not recognized by itunes and i have executed all steps in the apple suggested troubleshooting, the device will not reboot either.  Any suggestions?

    ipod touch is not recognized by itunes and i have executed all steps in the apple suggested troubleshooting, the device will not reboot either.  Any suggestions?

    Does it light up at all? If not, you could have a battery issue.
    Basic troubleshooting steps  
    17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 
    Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101

  • I just updated my iphone 4 to IOS 7.0.4 and it gets stuck backing up on step 2 of 7 and sometimes says step 2 of 4. I've got 2.09 GB free and ive reset it and still wont back up.

    I just updated my iphone 4 to IOS 7.0.4 and it gets stuck backing up on step 2 of 7 and sometimes says step 2 of 4. I've got 2.09 GB free and ive reset it and still wont back up. It also says my phone has never been backed up to the computer, but ive been doing it for 2 years on it. My Ipad 2 also was getting stuck on step 2.

    Hey there Ashleyehall,
    Thank you for your question. It sounds like iTunes is unable to complete a backup of your iPhone. I found this article for you to help troublehsoot the issue named:
    Apple software on Windows: May see performance issues and blank iTunes Store
    http://support.apple.com/kb/TS4123
    Symptoms
    iTunes stops responding when backing up or syncing with an iPhone, iPad, or iPod touch.
    Thank you for using Apple Support Communities.
    Take care,
    Sterling

  • Windows 8 installation gets stuck during create partition step in bootcamp. Any suggestions?

    windows 8 installation gets stuck during create partition step in bootcamp. I tried to restart the bootcamp with same results. I have given it more than 6 hrs for last 3 times but I was able to go past this step previously where I got stuck during registering windows8.

    Hi,
    According to your description, it seems that your all Windows 8.1 computers connect to network via normal wireless network.
    Did you have wireless router for them?
    Please delete this adhoc, then check if these computer could connect to network.
    If no, follow below guide to create and connect to adhoc :
    Create adhoc in Windows 8.1
    http://tipsandtricksforum.com/thread-210.html
    connect to adhoc with Windows 8.1 
    http://social.technet.microsoft.com/Forums/windows/en-US/56ff83ff-1f15-4fc1-aa37-6651340d46fa/windows-81-connecting-to-ad-hoc-networks
    Please Note: Since the website is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.
    Karen Hu
    TechNet Community Support

  • Workflow Questions - How to execute the steps in a workflow automatically?

    I am using MDM 5.5 SP6.
    My Question is how to execute the steps in the workflow automatically. That means NO user interaction.
    I have a simple workflow, Start- Process -- Syndicate -  Stop.
    When a new record added /updated/inserted this workflow will start automatically.  The workflow inbox, the workflow status is u2018Receivedu2019 Step is u2018Processu2019.  Now I have to right click on the record then u2018Next Stepu2019 then click on u2018Syndicateu2019 then workflow completes automatically.
    How to execute the Syndication step automatically?.  I donu2019t want to have any user interaction to syndicate these records.
    Is this possible?
    The reason for this is I want to do some field validation and based on the field validation some assignments then then I want  to syndicate these records without user interaction..

    Hi,
    If you want to do some validations and then based on result assignments on some of the fields before syndicating, then you have to use workflow. Only syndication server will not fulfill this requirement.
    you may try by making validation's automatic property as "Error". This way it will not allow to add any record not fulfilling validation. You can also try using calculated fields instead of assignment.
    I am not sure if you can make your workflow fully automatic, because atleast one process step is must for any workflow, and process step means user action.
    Regards,
    Shiv

  • I can't sync my ipod, it's stuck on the second step

    when i plug my ipod in and try to sync the music i get from cd's, my ipod gets stuck on the 2nd step of the syncing process. I always get an error message that says to reconnect or try again later because the syncing services aren't working. pleeeeeaaaaase help me.

    Try:
    "Waiting for changes to be applied": Apple Support Communities

  • Why is my syncing (ipad2) seem to be stuck on the last step?

    Why is my syncing (ipad2) seem to be stuck on the last step?

    Perform a Reset  ( No Data will be Lost )
    Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
    Wait for the Apple logo to Appear...
    Usually takes about 15 - 20 Seconds... ( But can take Longer...)
    Release the Buttons...

  • Indesign is stuck on executing start up services

    Having trouble starting Indesign. It is stuck on "executing start up services" and just stays there. Tried re installing it since it had the recent update, and also tried running as admin just in case and no luck. Using Creative Cloud, dunno if that makes a difference but photoshop and illustrator boot up very quickly.

    OS? Full version number for InDesign?

  • How to execute Block step in workflow so that Approval can be done by new

    Hi expertt.
    How to execute the block step in workflow with Local container passed to WF conatiner .
    so that wf can executed next step with event raised.

    Install the language packs for the additional languages available from http://releases.mozilla.org/pub/mozilla.org/firefox/releases/3.6.12/win32/xpi/
    As you have the Finnish version of Firefox, the additional language packs are Dutch - nl.xpi, Norwegian (Bokmål) - nb-NO.xpi, Norwegian (Nynorsk) - nn-NO.xpi, and if you want English you can use en-GB.xpi
    To assign a particular language, you can change a hidden preference:
    # Type '''about:config''' into the location bar and press enter
    # Accept the warning message that appears, you will be taken to a list of preferences
    # Locate the preference '''general.useragent.locale''', double-click on it and change it to the code for the language, for example '''nl''' for Dutch
    You can also use the [https://addons.mozilla.org/en-US/firefox/addon/1333/ Quick Locale Switcher] add-on to switch between installed languages.
    For more details see http://kb.mozillazine.org/Language_packs

  • My iPad gets stucked in the last step of the sync with the computer.

    When connecting the iPad to the computer the iTunes starts, reconizes my iPad and starts the sync of the iPad.
    It syncs the contacts, calendars, pictures, music, etc, but in the last step (7th; "finishing Sync") it stucks and stays for ever without finishing.
    I cannot load a previous backup because as soon as I connect the iPad to the computer the Sync process starts and no button is available.
    I've tried to load again iTunes to start from the begining but it is still saying the same, that the Sync process is finishing and is blocked there.
    Any help?
    Thanks a lot.

    Hi Demo,
    I've tried what you say but, if I'm doing it right, it doesn't work because after rebooting it goes again to syncing and stucks on the last step.
    Nevertheless let me check if I'm doing it right; When you say "Before you restore from the backup, quit iTunes, ...." you mean "Before" or "After" because I don't understand how I could reboot the iPad BEFORE I restore from the Backup if it is already restoring.
    Just let me write down the procedure to check that it is the right one:
    1- I launch iTunes (iPad not connected) and go to Edit>Preferences>Devices, and I check the box to Prevent the iPad to syncing automatically. I click OK.
    2- I quit itunes.
    3- I connect the iPad to the computer.
    4- I launch iTunes.
    5- I go to Restore from Backup
    6- Restore from Backup is finished
    7- I quit iTunes
    8- I disconnect the iPad from the PC
    9- I reboot my PC
    10- I reboot my iPad by holding down on the sleep and home buttons... iPad stars.
    11- I connect the iPad to my PC.
    12- I launch iTunes
    13- I click on sync button.
    If the procedure is right then my problem must be another one because when I do it and it starts syncing again the same problems comes back again and the syncing never stops at the last step.
    Thank you anyway for your time and support.
    Best regards,
    Francisco

  • HT5232 when trying to transfer my cellular from one ipad to a new one i get through the step where it appears i log in and then get stuck on the next step to choose a plan. any ideas?

    I am trying to transfer my cellular plan from my old ipad to the new one and get stuck after the second step. I currently log in, choose the plan which is the same as the old plan and nothing happens from there. The only way to get out of the screen is to cancel.
    Any ideas?

    Hello Deannefromco,
    Thanks for using Apple Support Communities.
    For more information on this, take a look at:
    When you enable the "Manually manage" option, you can use Autofill to quickly sync audio content from your music library or a selected playlist.
    iTunes: Syncing media content
    http://support.apple.com/kb/ht1351
    Best of luck,
    Mario

  • Indesign CC stuck at "Executing startup services".

    As per title,. Indesign CC won't start at all, it gets stuck at "Executing startup services".
    I have reinstalled without any change.
    Running - Win 7 64bit

    See Troubleshooting 101: Replace, or "trash" your InDesign preferences for the paths to the two folders ID uses to store the prefs and make sure that both your user and System have Full Control permissions. If that doesn't solve it, reinstall.

  • HT4914 How long does it take for Match to install itself? Mine seems to be stuck @ the end of step 1.

    How long does it take for Match to install itself? Mine seems to be stuck @ the end of step 1.

    Measuring a 1% discharge is likely not very helpful.
    Why not see how long your battery lasts on a full charge?

  • HT1296 THE SYNCING IS STUCK ON "SYNCING CALENDARS (STEP 3 OF 8)"

    THE SYNCING IS STUCK ON SYNCING CALENDARS (STEP 3 OF 8)
    WHAT TO DO?

    Try to reset the sync history. Not sure where to access that on the Mac, but it is in Preferences>Devices on Windows.

Maybe you are looking for