#2032 error observed while launching flex based application from the standalone machine.

We trying to launch flex based application deployed on weblogic on RHEL 6.4 OS with flash version 15.0, found #2032 error on UI. Request help us on this scenario.

hi all,
UPDATE:
i have some how managed to handle my error at both REQUEST MESSAGE peoplecode and at HANDLER peoplecode. Tested the webservice using SOAPUI tool. After passing all inputs required, the customer is not created and i am getting a blank response message which should contain the SETID and CUST_ID as response. Please help me out whether i am missing any Key part in creating a CUSTOMER. Note, i haven't written any Peoplecode for creation and i am also not aware how to do the same or where to write the logic for it.
Kindly bare with me and do help me out as i m struck with it for long. Thanks in advance

Similar Messages

Error message when attempting to download applications from the Cloud?

Anyone else receive an error message stating the download appears corrupt when attempting to download an application from their Cloud membership?

Hi there,
Install the latest update of Adobe Application Manager from the below link:
http://www.adobe.com/applicationmanagerpatch/
Regards,
Jairaj

WdsClient: An error occurred while obtaining an IP address from the DHCP server

Trying to create and deploy a Windows 7 pro image for Dell optiplex 390s. Getting the dreaded error above when trying to connect to the DHCP. After a couple days of research I've tried injecting drivers, different version of drivers, injecting drivers into
a different boot image, changing the name and/or deleting the setup.exe file from the image, verified that spanning-tree portfast was enabled on the switch, and edited \windows\system32\startnet.cmd. Everything i've tried results in the error still showing.
When running ipconfig it looks like the NIC is not even initializing which leads me to believe it's a driver issue still. I'm out of ideas on this one. Anyone else have any?

Hi,
Does the issue occur on other computers? Try to enable the spanning-tree portfast on the Cisco switch.
Please check out this post:
http://social.technet.microsoft.com/Forums/en-US/itprovistadeployment/thread/d70a8258-9dd3-4868-9e06-d25de427f3cc
Tracy Cai
TechNet Community Support

An error occurred while launching/running the application

We've been using Web Start to deliver one of our products for over 2 months. We're getting about 10 downloads of our application a day which is very good considering we're in a very niche market (mapping applications). However, some customers (about 20%) are having a number of problems with Web Start either during installation or during download. For this reason we had to create a stand alone installer for customers that couldn't get Web Start working or more commonly could get Web Start working but couldn't download our application. The most common problem we see is the 'Unable to load resource' problem. I've attached the different errors and different exceptions sent from a customers site. Can you spread any light on this. Is it to do with Web Start not being able to identify the proxy?
Many thanks in advance
Ian
Launch
An error occurred while launching/running the application.
Title: OS MasterMap Viewer
Vendor: Snowflake Software
Category: Download Error
Unable to load resource: http://www.snowflakesoft.co.uk/app/viewer.jnlp
Exception
JNLPException[category: Download Error : Exception: java.net.UnknownHostException: www.snowflakesoft.co.uk : LaunchDesc: null ]
at com.sun.javaws.cache.DownloadProtocol.doDownload(Unknown Source)
at com.sun.javaws.cache.DownloadProtocol.isLaunchFileUpdateAvailable(Unknown Source)
at com.sun.javaws.LaunchDownload.getUpdatedLaunchDesc(Unknown Source)
at com.sun.javaws.Launcher.downloadResources(Unknown Source)
at com.sun.javaws.Launcher.handleApplicationDesc(Unknown Source)
at com.sun.javaws.Launcher.handleLaunchFile(Unknown Source)
at com.sun.javaws.Launcher.run(Unknown Source)
at java.lang.Thread.run(Unknown Source)
Wrapped
java.net.UnknownHostException: www.snowflakesoft.co.uk
at java.net.InetAddress.getAllByName0(Unknown Source)
at java.net.InetAddress.getAllByName0(Unknown Source)
at java.net.InetAddress.getByName(Unknown Source)
at java.net.Socket.<init>(Unknown Source)
at sun.net.NetworkClient.doConnect(Unknown Source)
at sun.net.www.http.HttpClient.openServer(Unknown Source)
at sun.net.www.http.HttpClient.openServer(Unknown Source)
at sun.net.www.http.HttpClient.<init>(Unknown Source)
at sun.net.www.http.HttpClient.<init>(Unknown Source)
at sun.net.www.http.HttpClient.New(Unknown Source)
at sun.net.www.protocol.http.HttpURLConnection.connect(Unknown Source)
at sun.net.www.protocol.http.HttpURLConnection.getInputStream(Unknown Source)
at java.net.HttpURLConnection.getResponseCode(Unknown Source)
at com.sun.javaws.util.URLUtil.doesURLExist(Unknown Source)
at com.sun.javaws.cache.DownloadProtocol.doDownload(Unknown Source)
at com.sun.javaws.cache.DownloadProtocol.isLaunchFileUpdateAvailable(Unknown Source)
at com.sun.javaws.LaunchDownload.getUpdatedLaunchDesc(Unknown Source)
at com.sun.javaws.Launcher.downloadResources(Unknown Source)
at com.sun.javaws.Launcher.handleApplicationDesc(Unknown Source)
at com.sun.javaws.Launcher.handleLaunchFile(Unknown Source)
at com.sun.javaws.Launcher.run(Unknown Source)
at java.lang.Thread.run(Unknown Source)

Apologies for the lack of response only I bust my knee a week ago and I've been in agony since. Anyway enough moaning.
Yes users are behind a firewall. From what I can get from Sun the problem stems from JWS's inability to detect script based proxies. This is very frustrating because we have about 25% of our customers that just can't use JWS because of this. Ok so they could type it in manually, however, how many system support people are going to give out those sorts of details to end users, besides most end user don't even know what a proxy is!
To get around this we've provided a standalone installer (which defies the point of JWS in the first place). Don't get me wrong I think JWS is an amazing piece of software, however, I can't see how JWS can be used successful across the internet until this is solved, intranet, extranet fine.
In our experience you can't leave 25% of your customer base behind!

Error occurred while launching/running the application.

Hello all,
I'm using the "tutorial" demo from Vamp, and
here's what
happened after I chg the jnlp file:
1. Enabling MIME type on my HTTPD server
2. Disabling the proxy of my IE Browser
3. Installed /jdk1.3
4. JWS started with the following error:
GENERAL:
An error occurred while launching/running the application.
Title: 4. Java Web Start Resource Loading Tutorial
Vendor: Gerald Bauer
Category: Download Error
Corrupted JAR file at http://hpsgnnec/tutorial.jar
Exception:
JNLPException[category: Download Error : Exception: java.util.zip.ZipException: error in opening zip file : LaunchDesc: null ]
     at com.sun.javaws.cache.DownloadProtocol.doDownload(Unknown Source)
     at com.sun.javaws.cache.DownloadProtocol.getResource(Unknown Source)
     at com.sun.javaws.LaunchDownload.downloadJarFiles(Unknown Source)
     at com.sun.javaws.LaunchDownload.downloadEagerorAll(Unknown Source)
     at com.sun.javaws.Launcher.downloadResources(Unknown Source)
     at com.sun.javaws.Launcher.handleApplicationDesc(Unknown Source)
     at com.sun.javaws.Launcher.handleLaunchFile(Unknown Source)
     at com.sun.javaws.Launcher.run(Unknown Source)
     at java.lang.Thread.run(Unknown Source)
LAUNCH FILE
<jnlp
spec="1.0+"
codebase="http://hpsgnnec" >
<information>
<title>4. Java Web Start Resource Loading Tutorial</title>
<vendor>Gerald Bauer</vendor>
<description>Tutorial on how to load resources </description>
<icon href="tutorial.gif"/>
<offline-allowed />
</information>
<resources>
<j2se version="1.3"/>
<jar href="tutorial.jar"/>
</resources>
<application-desc main-class="vamp.tutorial.Main">
</application-desc>
</jnlp>
WRAPPED EXCEPTION:
java.util.zip.ZipException: error in opening zip file
     at java.util.zip.ZipFile.open(Native Method)
     at java.util.zip.ZipFile.<init>(Unknown Source)
     at java.util.jar.JarFile.<init>(Unknown Source)
     at java.util.jar.JarFile.<init>(Unknown Source)
     at com.sun.javaws.cache.DownloadProtocol$RetrieveAction.actionDownload(Unknown Source)
     at com.sun.javaws.cache.DownloadProtocol.doDownload(Unknown Source)
     at com.sun.javaws.cache.DownloadProtocol.getResource(Unknown Source)
     at com.sun.javaws.LaunchDownload.downloadJarFiles(Unknown Source)
     at com.sun.javaws.LaunchDownload.downloadEagerorAll(Unknown Source)
     at com.sun.javaws.Launcher.downloadResources(Unknown Source)
     at com.sun.javaws.Launcher.handleApplicationDesc(Unknown Source)
     at com.sun.javaws.Launcher.handleLaunchFile(Unknown Source)
     at com.sun.javaws.Launcher.run(Unknown Source)
     at java.lang.Thread.run(Unknown Source)
Wud appreciate any advice.
THanks much,
Jessica

Try downloading the jar file itself and opening it with winzip or checking its contents with jar tf <jarfile name>
if it is indeed corrupt (as the exception stacktrace seems to indicate) try mailing the person who wrote the demo so that he can check whether the jarfile is there or not, and whether it is corrupt or not.
Other than that, nac.
Jeremy

"Error occurred while launching. The end of the file was reached" ?

I have OS 9.2.2 and, recently, OS X 10.3.9, installed on my machine. I have not yet transferred my Outlook Express files to MAIL. Yesterday, I was attempting to clean out my Outlook Express DELETE files when I noticed that I had hit the wrong key and was deleting my IN files. I couldn't stop the process,so I turned off my machine. Now, whenever I try to connect with Outlook Express, I get the message "Error occurred while launching. The end of the file was reached". Now, Outlook Express is no longer supported by Microsoft, so it's time to change to Safari, anyway, but I have many files in Outlook Express that I want to save. Can anything be done?

David,
No solutipn yet, but I'm still hopeful. However, I would appreciate your comments on the following:
1. I still could not open Outlook Express, even after rebuilding the desktop--twice--and downloading it again. However, I just noticed that you recommended the use of a OS 9 CD, not a download. I'll look around for the CD if you feel that's the only way to go. Is it?
2. When I downloaded the OS 9 Outlook Express, the window said to copy it to my Hard disk. I assume that means just to drag the Outlook Express icon to the top of the Hard Disk icon. Is that correct?
3. If all else fails, what about those programs that have been around for years that facilitate the retrieval of otherwise lost files. Would such a program be helpful in this case? If so, can you mention a few of them? I want to retain some of those files, even if it means having to spend a hundred dollars or so for the necessary software.
4. Yes, such mishaps can indeed be painful. Fortunately, although I am a bit of a fumble-fingers, the problems I have encountered since I bought my set in 1999 as the result of such clumsiness have been few. It looks like I've been lucky, but that I am paying for it now.
iMac DV (Special Edition) Mac OS 9.1.x

An Error Occurred While Processing This Page. Check The Log For Details. Pl

Hi,
I started getting this error while opening the app
Application was working fine. All of a sudden this error came while opening the application.
" An Error Occurred While Processing This Page. Check The Log For Details. Please Close The Current Tab and Open Application Again."
I cannot see calc manger rules for this means in calc manager I am not able to see this app.
Also, in logs I see
java.lang.RuntimeException: Error loading objects from data source: java.sql.SQLSyntaxErrorException: ORA-00942: table or view does not exist
I am not able to get why this is occurring.
Any help?

If it is not important then you can try deleting and recreating the application, if you want to be sure after you delete the application then drop/recreate the Oracle schema.
If you have problems deleting the application and have to remove it manually the following post might be helpful Planning 11.1.1.3 - Manually Delete a Classic Application
Cheers
John
http://john-goodwin.blogspot.com/

I got an error message while burning a cd in itunes - "The attempt to burn a disc failed. The burn failed because of a medium write error. What is that and how can i fix it?t

I got an error message while burning a CD in iTunes - "the attempt to burn a disc failed. The burn failed because of a medium write error." What does this mean and how do I fix it?

The disk you are using probably has a defect, not uncommon on consumer grade disks. Try another disk or better yet another disk from a different manufacturer or at least a different batch.

Time Machine error message while restoring..."an error occurred while adding a recovery system to the destination disk

I had to change my hard drive in my MBP 15". I use Time Machine on a Time Capsule for backup. I am booting up my laptop with a bootable USB key. I have partitioned my new hard drive (bigger than the old one) and named it Macintosh HD (same as the old one). I select the option to restore from Time Machine Backup. I select one of my latest backup....select my destination drive...the restore process starts but stop within minutes with the following message. "An error occurred while adding a recovery system to the destination disk" It then prompts me to restart....
I need your help...what can it be.
Thanks

I've encountered this issue when the Time Machine was encrypted with FileVault.
Article: HT4718
Additional Information
Please note that OS X Recovery must be present on the computer's startup volume in order to use FileVault 2. Using RAID partitions or a non-standard Boot Camp partition on the startup disk may prevent OS X from installing a local Recovery system. See "OS X: Some features of Mac OS X are not supported for the disk (volume name)" for more information.
What seems to work, is reinstalling the OSX from the internet, and then using migration assistant to pull the user from the time machine backup external when logged into a temporary administrator user to move the original user back over.
Perhaps if you're stubborn, what would work is the following from the same article:
What to do if the installer warns that no Recovery System can be created
Some disk partition configurations may result in the OS X installer reporting that it could not create a Recovery System. In these situations, even if you are permitted to continue the install, you may want to quit the installation and create an external, bootable OS X hard drive with a Recovery System, first. You can continue your OS X upgrade on your computer's startup drive after creating an external Recovery System.
Your storage device must have at least 13 GB available (after formatting) to install OS X Lion or later and a Recovery partition.
These steps erase and reformat the storage device. This article instructs you on setting up a storage device to use the GUID partition scheme and the Mac OS Extended (Journaled) format, which are required to install OS X and a Recovery partition on your external storage device. You should back up any important files that are on the device to a different drive.
This procedure installs a version of OS X that is compatible with the Mac it was created with. Using this OS X system with a different Mac model may produce unpredictable results.
Your computer's serial number is sent to Apple as part of this process to help authenticate your request to download and install OS X Lion.
All of this information was collected by browsing through the public articles on the Apple Support website.

"An unspecified error occurred while performing a conform action on the following file:"

Has anyone else gotten this error in any of their projects? I've searched around Adobe support pages and elsewhere on the internet, but have found nothing.
It comes up in the events window and I can't even read what file it's talking about because it's on the next line, but the error message only shows one line and I haven't figured out a way to expand it.
I'm not even sure if it's causing any problems, or not (the project seems to work ok). This message shows up twice, as a red circle with an 'X' in it, but I also get the following message numerous times referring to a large amount of my .avi files:
"File importer detected an inconsistency in the file structure of filename.avi. Reading and writing this file's metadata (XMP) has been disabled."
That message shows up as a yellow triangle with an '!' in it. Since I haven't been able to turn anything up about these messages, I figured I'd ask here and see if anyone knew what was going on, how to fix the problem or if I should even worry about them.
Thanks.

I am having this problem now when i use dynamic link from Premiere to after effects. I copy the footage from premiere then paste into after effects, i add alittle text maybe some light rays etc save it then go back to premiere. Then i get this message "An unspecified error occurred while performing a conform action on the following file C:\Caches\Media Cache Files\text comp 1 48000.cfa." does anyone have any idea as to what this is? i have had a few problems using the dynamic link from premiere to after effects problems such as Premiere freezing, not playing the after effects comps back in real time, crashes etc. Its as if the 2 programs dont like the dynamic link.
Im running Master Collection CS5 & CS 5.5 on running on a 24gb ram, Intel Core i7 950 @3.07GHz PC with a NVIDIA GeForce GTX470 graphics card.

PRE10 "Unspecified error occurred while performing a conform action on the following file:..."

I really need some help!
I am making a short video on premiere elements 10 and I seem to get this conforming error everytime I open the project and I cannot save it either!!
"Unspecified error occured while performing a conform action on the following file:
File0002.AVI 48000.CFA"
This happens everytime I open premiere elements 10 to lots (or all) of my video clips and I can't find any help in the adobe forums or anywhere else online!
Also, I want to save this video as an AVI file, but when I try to export it, it says it has finished quite quickly and has not even added anything to click on or when it does, it does not play. Sometimes it says it has finished then comes up with: "Error compiling movie. Unknown error". one of these happen everytime that I try to save it.
Lots (or all) of my avi files come up as this same conforming error when I load the project and I have no clue as to what to do!...
It also crashes nearly everytime after these compiling errors!
My computer is running windows 7 ultimate OS
Please help!
Please...!

Operating System
System Model
Windows 7 Ultimate (build 7100)
Gigabyte Technology Co., Ltd. M61PME-S2P
Enclosure Type: Desktop
Processor
Main Circuit Board
2.80 gigahertz AMD Athlon X2 240
256 kilobyte primary memory cache
1024 kilobyte secondary memory cache
64-bit ready
Multi-core (2 total)
Not hyper-threaded
Board: Gigabyte Technology Co., Ltd. M61PME-S2P
Bus Clock: 200 megahertz
BIOS: Award Software International, Inc. F2 12/30/2008
Drives
Memory Modules
320.07 Gigabytes Usable Hard Drive Capacity
125.82 Gigabytes Hard Drive Free Space
TSSTcorp CDDVDW SE-S084C USB Device [Optical drive]
SAMSUNG HD321HJ SCSI Disk Device (320.07 GB) -- drive 0, s/n S13RJ90SB04688, SMART Status: Healthy
1984 Megabytes Usable Installed Memory
Slot 'A0' has 2048 MB
Slot 'A1' is Empty
Local Drive Volumes
c: (NTFS on drive 0) *
319.97 GB
125.76 GB free
d: (NTFS on drive 0)
105 MB
65 MB free
* Operating System is installed on c:
The media files are avi and are in my videos folder (videos-windows 7)

Errors encountered while doing BCC Full deployment in the Applying phase

Errors encountered while doing BCC Full deployment in the Applying phase. The stack trace is as below:-
**** Warning    Fri Aug 02 09:43:24 BST 2013    1375433004207   /atg/epub/PublishingRepository Using default JDBC type for: project:tar814 could not find this column in the table's meta data
**** debug      Fri Aug 02 09:52:54 BST 2013    1375433574278   /atg/epub/DeploymentServer      Run first apply phase: true
**** debug      Fri Aug 02 09:52:54 BST 2013    1375433574279   /atg/epub/DeploymentServer      Switch switchable CA datasources:
**** debug      Fri Aug 02 09:52:54 BST 2013    1375433574279   /atg/epub/DeploymentServer        isDeploymentRollback(): false
**** debug      Fri Aug 02 09:52:54 BST 2013    1375433574284   /atg/epub/DeploymentServer        Current Target live datasource name: DataSourceA
**** debug      Fri Aug 02 09:52:54 BST 2013    1375433574285   /atg/epub/DeploymentServer        CA switching datasource: /atg/commerce/jdbc/ProductCatalogSwitchingDataSource_production
**** debug      Fri Aug 02 09:52:54 BST 2013    1375433574285   /atg/epub/DeploymentServer          Current live datasource name: DataSourceB
**** debug      Fri Aug 02 09:52:54 BST 2013    1375433574285   /atg/epub/DeploymentServer          Current offline datasource name: DataSourceA
**** debug      Fri Aug 02 09:52:54 BST 2013    1375433574286   /atg/epub/DeploymentServer          The current CA live datasource is pointing at the Target offline datasource. No CA switch necessary.
**** debug      Fri Aug 02 09:52:54 BST 2013    1375433574287   /atg/epub/DeploymentServer      Switchable CA datasources switched.
**** info       Fri Aug 02 09:52:54 BST 2013    1375433574307   /atg/epub/DeploymentServer      DirectSQLReplicationAdapter: Starting FIRST phase data transfer.
**** Error      Fri Aug 02 09:53:12 BST 2013    1375433592737   /com/screwfix/content/block/BlockRepository-ver SQL Statement Failed: [++ReplicationSQL++]
**** Error      Fri Aug 02 09:53:12 BST 2013    1375433592737   /com/screwfix/content/block/BlockRepository-ver INSERT
**** Error      Fri Aug 02 09:53:12 BST 2013    1375433592737   /com/screwfix/content/block/BlockRepository-ver INTO ndcatalog2.extn_block_link
**** Error      Fri Aug 02 09:53:12 BST 2013    1375433592737   /com/screwfix/content/block/BlockRepository-ver      (
**** Error      Fri Aug 02 09:53:12 BST 2013    1375433592737   /com/screwfix/content/block/BlockRepository-ver        renderer_id,
**** Error      Fri Aug 02 09:53:12 BST 2013    1375433592737   /com/screwfix/content/block/BlockRepository-ver        link,
**** Error      Fri Aug 02 09:53:12 BST 2013    1375433592737   /com/screwfix/content/block/BlockRepository-ver        block_id
**** Error      Fri Aug 02 09:53:12 BST 2013    1375433592737   /com/screwfix/content/block/BlockRepository-ver      )
**** Error      Fri Aug 02 09:53:12 BST 2013    1375433592737   /com/screwfix/content/block/BlockRepository-ver SELECT
**** Error      Fri Aug 02 09:53:12 BST 2013    1375433592737   /com/screwfix/content/block/BlockRepository-ver        t1.renderer_id,
**** Error      Fri Aug 02 09:53:12 BST 2013    1375433592737   /com/screwfix/content/block/BlockRepository-ver        t1.link,
**** Error      Fri Aug 02 09:53:12 BST 2013    1375433592737   /com/screwfix/content/block/BlockRepository-ver        t1.block_id
**** Error      Fri Aug 02 09:53:12 BST 2013    1375433592737   /com/screwfix/content/block/BlockRepository-ver FROM
**** Error      Fri Aug 02 09:53:12 BST 2013    1375433592737   /com/screwfix/content/block/BlockRepository-ver        extn_block_link t1,
**** Error      Fri Aug 02 09:53:12 BST 2013    1375433592737   /com/screwfix/content/block/BlockRepository-ver        extn_block t2
**** Error      Fri Aug 02 09:53:12 BST 2013    1375433592737   /com/screwfix/content/block/BlockRepository-ver WHERE t2.asset_version =
**** Error      Fri Aug 02 09:53:12 BST 2013    1375433592737   /com/screwfix/content/block/BlockRepository-ver        ( SELECT MAX ( asset_version )
**** Error      Fri Aug 02 09:53:12 BST 2013    1375433592737   /com/screwfix/content/block/BlockRepository-ver          FROM extn_block
**** Error      Fri Aug 02 09:53:12 BST 2013    1375433592737   /com/screwfix/content/block/BlockRepository-ver          WHERE
**** Error      Fri Aug 02 09:53:12 BST 2013    1375433592737   /com/screwfix/content/block/BlockRepository-ver            (
**** Error      Fri Aug 02 09:53:12 BST 2013    1375433592737   /com/screwfix/content/block/BlockRepository-ver              (
**** Error      Fri Aug 02 09:53:12 BST 2013    1375433592737   /com/screwfix/content/block/BlockRepository-ver                checkin_date <= ?
**** Error      Fri Aug 02 09:53:12 BST 2013    1375433592737   /com/screwfix/content/block/BlockRepository-ver              )
**** Error      Fri Aug 02 09:53:12 BST 2013    1375433592737   /com/screwfix/content/block/BlockRepository-ver            )
**** Error      Fri Aug 02 09:53:12 BST 2013    1375433592737   /com/screwfix/content/block/BlockRepository-ver            AND branch_id = ?
**** Error      Fri Aug 02 09:53:12 BST 2013    1375433592737   /com/screwfix/content/block/BlockRepository-ver            AND block_id = t2.block_id
**** Error      Fri Aug 02 09:53:12 BST 2013    1375433592737   /com/screwfix/content/block/BlockRepository-ver        )
**** Error      Fri Aug 02 09:53:12 BST 2013    1375433592737   /com/screwfix/content/block/BlockRepository-ver AND t2.version_deleted = ?
**** Error      Fri Aug 02 09:53:12 BST 2013    1375433592737   /com/screwfix/content/block/BlockRepository-ver AND t2.branch_id = ?
**** Error      Fri Aug 02 09:53:12 BST 2013    1375433592737   /com/screwfix/content/block/BlockRepository-ver AND t1.asset_version = t2.asset_version
**** Error      Fri Aug 02 09:53:12 BST 2013    1375433592737   /com/screwfix/content/block/BlockRepository-ver AND t1.block_id = t2.block_id
**** Error      Fri Aug 02 09:53:12 BST 2013    1375433592737   /com/screwfix/content/block/BlockRepository-ver
**** Error      Fri Aug 02 09:53:12 BST 2013    1375433592737   /com/screwfix/content/block/BlockRepository-ver -- Parameters --
**** Error      Fri Aug 02 09:53:12 BST 2013    1375433592737   /com/screwfix/content/block/BlockRepository-ver p[1] = {pd: checkin_date} 2013-07-30 10:23:57.867 (java.sql.Timestamp)
**** Error      Fri Aug 02 09:53:12 BST 2013    1375433592737   /com/screwfix/content/block/BlockRepository-ver p[2] = {pd: branch_id} 10500 (java.lang.String)
**** Error      Fri Aug 02 09:53:12 BST 2013    1375433592737   /com/screwfix/content/block/BlockRepository-ver p[3] = {pd: version_deleted} false (java.lang.Boolean)
**** Error      Fri Aug 02 09:53:12 BST 2013    1375433592737   /com/screwfix/content/block/BlockRepository-ver p[4] = {pd: branch_id} 10500 (java.lang.String)
**** Error      Fri Aug 02 09:53:12 BST 2013    1375433592737   /com/screwfix/content/block/BlockRepository-ver [--ReplicationSQL--]
**** Error      Fri Aug 02 09:53:12 BST 2013    1375433592737   /com/screwfix/content/block/BlockRepository-ver         java.sql.SQLSyntaxErrorException: ORA-00904: "RENDERER_ID": invalid identifier
Please note that we are migrating from ATG 2007 to ATG 10.0.1...Also we are doing deployment in this new environment for the first time only.
Thanks a lot
Pijush

Hi Pijush,
The exception towards the end of the stack trace says the RENDERER_ID is an invalid identifier. the Oracle error 00904 indicates the column name must be wrong. Can you verify the repostiory xml on the BlockRepository and check the column name.
Regards,
Srikanth

I keep getting "error occurred while attempting to import file *******. The disc your are attempting to use is full." I have an external hard drive that I moved files over to, but apparently they're also still on my hard drive? HELP!

I keep getting "error occurred while attempting to import file *******. The disc your are attempting to use is full." I have an external hard drive that I moved files over to, but apparently they're also still on my hard drive? HELP!

So you have backed up the content of the computer's hard drive, too?
That usually is a great idea since it is possible to lose use of the system
if parts of it have accidentally been removed or get over-written, or the
main system files get corrupted, when the hard disk drive gets too full.
If you have not trashed the originals of your created content, that remain
after you made copies on an external hard drive or other device, then
that is what you'd have to do to reclaim the capacity still in use by them.
What are specifications of the hard disk drive? The unused capacity
verses the used, in GB? If the hard drive has less than 15 to 20%
free or unused capacity, you could run into trouble. Mine are 40-50%
unused hard drive space, so ample room is available for automatic
Virtual Memory to use that capacity as temporary swap file space.
This is helpful when the computer could use more physical RAM
memory capacity, but doesn't have it. Or if the RAM is maxxed out
and you can't add any more. Virtual Memory is part of OS X and the
system automatically can use as much as is available, but it is better
to be sure there is plenty of resources available to include chip RAM
as well as unused or free hard drive capacity for use as VM.
If for some reason your files in Trash won't go away when you empty
it, you may have to restart. Be sure you have not included any System
files in the content in the Trash, or the Mac may not start up later on.
You may have to boot the computer from the install-restore OS X DVD
and run Repair Disk from its version of Disk Utility, to be sure it's OK.
I'm guessing that by now you know enough about the vintage system
in the older hardware to figure it out, so I won't write about it now.
In any event... hopefully you can simply trash the files, but check them
carefully, & you may need to remove (copy to archive first) even more.
Good luck & happy computing!

How can i launch application from the terminal in 32-bit mode?

how can i launch application from the terminal in 32-bit mode?
everytime i have to check and uncheck the finder's info panel and it's really annoying, thanks!

''Courtesy of cor-el''
https://support.mozilla.com/en-US/questions/823873
Other users should note that Firefox has public release versions of 64bit only for Mac And Linux; not for Windows, yet.

I am running Mac OS 10.6.7 I cannot run a java based program from the net when parental controls are set the error is The error is Load: class installer.CheckVersion 13. class not found Help!

I am running Mac OS 10.6.7 I cannot run a java based program from the net when parental controls are set the error is The error is Load: class installer.CheckVersion 13. class not found

Then, talk to the person running the lab.

#2032 error observed while launching flex based application from the standalone machine.

Similar Messages

Maybe you are looking for