23" HD Cinema sends my 10.4.8 (G5 SP1.8) into a kernel panic shutdown

Ever since the latest OS 10.4.8 update my machine randomly shutdown in 2 to 12 hours. After trying every thing imaginable I finally found that bypassing the displays USB hub it works like before the update! It has been up now for 4 days and my fingers are still crossed.
I original thought and still think it might have something to do with this http://discussions.apple.com/message.jspa?messageID=3552646#3552646
1.8 G5 Power Mac   Mac OS X (10.4.8)  

I can not get my 23" display to turn on with 10.4.8. mac book goes to external mode but no luck w/external. HAve tried all the steps including re-installing from orig disk. It all worked fine with 10.4.3
I'd be grateful for any suggestions to this seemingly related issue.

Similar Messages

  • Kernel panic when sending to Soundtrack

    Tried this question on the soundtrack forum and got no responses. I've used Sountrack Pro 2 plenty of times without issues, but now I'm trying to send it a huge project (1 hour, 32 tracks). Kernel panic begins within seconds and even when not, operation is slow and induces more kernel panic. Eventually it crashes with the message: "An unexpected problem, uncaught exception".
    I've deleted preferences, repaired permissions, upgraded to snow-leopard, did  a clean install of FCS (6) and it's still happening.
    Perhaps my machine doesn't have enough resources for 32 tracks? I want to doubt that since FCP 6 handles them fine.
    It's a dual quad core 3GHz Mac Pro with 5 GB memory, ATI Radeon X1900. 122 GB free space on my scratch disk etc.
    I've copied the crash report to a file if anyone wants to take a look.
    Thanks,
    Jeff

    I already had "Put the hard disk(s) to sleep whenever possible" unchecked. I still get the kernel panics on the G5, and dead response on the keyboard/mouse on the G3 when attempting to wake up from sleep.
    PowerMac G5 1.6Ghz   Mac OS X (10.4.8)  

  • Cinema display causing freezes and kernel panics?

    Okay, if anyone has experienced this before I would like to know. I've been having these powerbook freezes at night., and occasional kernel panics during the day. I usualy leave my computer on all night, but when I check it in the morning it's pretty much froze everyday.
    I did a complete clean install, I've ran hardware test, past both tests, reset pram, av-ram. I did install 2 gig of ram (2x1), I was beggining to question the ram, but once I unpluged it from my Cinema display I have not had one freeze in three days. Why would that be? Has anyone else had problems like this?
    I've used this display for a year with my previous powerbook and have had no problems, but for some reason these two don't get along. I'm thinking it might have something to do with the usb, or firewire ports. Any ideas?
    Thanks in advance.

    You know it does seem to be the memory. Once I replaced the memory with different chips all kernel panics have stopped, same with freezes. Funny how this passed all the memory tests.
    All seems to be better now anyway....thanks.

  • I need to make a copy of an entire email, including the header w/the sender's info and time, etc. to insert into a letter, etc. How can I do this w/out cutting and paste and doing the header separately from the text.

    I need to make a copy of an entire email, including the header w/the sender's info and time, etc. to insert into a letter, etc. How can I do this w/out cutting and pasting   the header separately from the text. I know there is a way besides a screen shot but I've spend hours trying to find it.

    Smurfslayer wrote:
    For the particularly persnickety types you might want to expose the full headers in the email message as well.  It's easy enough to do, from mail's 'menu' select "view"; then "message"; then all headers.
    Another option you could use is a screen capture using Grab.
    Activate Grab, then shift + command + w (for a window screen shot).  Then confirm the window selection and click the mail message. 
    Dave
    Why are you addressing this to me...?
    I am not the OP...

  • Sending Mail and kernel panic

    PLEASE PLEASE help me on this issue.
    Since I updated to Leopard (which has been the biggest mistake so far) every time I try to send an e-mail (using Apple Mail 3.0) through my company's server I get a Kernel Panic issue in four languages and I have to restart my computer. The funny thing is that sending the e-mail through Gmail's server works fine.
    I don't know what to do, but its driving me crazy.
    I appreciate all the help I can get to solve this problem.

    Thank you for your post!
    Here are some troubleshooting steps for you to follow that may help you attempt to rectify your problem.
    (1) Please ensure that you have ran all software updates: Apple, then Software Update, then install all updates that are shown. Once updates have been ran and you have rebooted, continue this process until it says no more updates are available at this time.
    (2) What happens when you log into your companies webmail and attempt to send a message on the same connection? Does the same issue occur? If so consult with your IT administrator and see if other Macintosh users are having a similar problem.
    (3) What happens when you attempt to send Mail in the activity pane? Click, (at top of screen) Window, then Activity pane before the panic occurs?
    (4) Try creating a new user in System Preferences, then Accounts. Once you're in System Preferences, click on the Accounts icon. Then click on the padlock, and authenticate with your Administrative password. Click on the "+" sign, then the drop down that says "standard", and change that to Administrator. In each field type the word "test", and then click create account. Close out of System Preferences, then log out of your user account (Apple icon, then log-out). Once you've done this launch mail in the test user and reconfigure it with only your work mail account. Does the same issue persist in the new user when attempting to send mail? If so boot to your install disc for Leopard and run Disk Utilities Disk First Aid- Repair Disk and then proceed to Archive and Reinstalling your operating system preserving user and network settings.
    Following this article is advised:
    http://docs.info.apple.com/article.html?artnum=107120
    (5) If you're able to send Mail successfully in the new user log out of test and log back into your user account as you've isolated the issue to be user specific. Go to System Preferences and delete the test user account then once you're sure no application is open such as Mail open a Finder window and then navigate to your Home folder, then Library, then Mail. Click and drag the Mail folder to the desktop. Then click Preferences, and find and remove com.apple.mail.plist to the desktop as well. Log out and log back in. Relaunch mail and reconfigure your mail account for work. If you click on Mail, then Preferences, then Accounts, make sure only your work account is listed in an attempt to remove any other variables. If the Google one is still listed remove it. Then re-add your work account after confirming the outgoing mail address with your IT administrator and the correct port number in addition to whether or not SSL is required and what type of authentication is necessary. If this works, then trash the .plist and leave the Mail folder on your desktop in the event you need to revert to your old database for whatever reason for at least a week or so till you're sure the problem has been permanently resolved.
    Some other ideas that I have include:
    * Are you hard wired via ethernet to your works network? Is there a wireless network that you can connect to via Airport disabling your ethernet connection? Attempt to send mail from that and see if the unit continues to kernel panic.
    * Make sure any peripheral devices connected to your computer are removed (you never know, unlikely yes, but to be safe I'd remove them).
    * If you upgraded from Tiger archiving and reinstalling preserving users and network settings may very well resolve your issue. Only do this after isolating that the problem is system wide across the OS.
    * Leopard may not be compatible with your network at work for whatever reason, archiving and downgrading back down to Tiger 10.4 is always an option as well. Just make sure to use your Tiger disc and run software updates after to ensure you're on 10.4.11.
    Making sure you have a complete backup prior to archiving or making any system modifications is equally as important especially if it's your work machine.
    Hope this helps! :-D
    Tammy

  • HT6030 Since I did the update, my mail-programm doesn't work no more. So I cannot send any eMail out or change the text into the eMail. Help, this is a catastrophe!!! Lukas Schmid

    Since I did the Mavericks-update, my mail-programm doesn't work no more. So I cannot send any eMail out or change the text into the eMail. Help, this is a catastrophe!!! Lukas Schmid

    Hey Lukas Schmid,
    The following resource may provide more help in troubleshooting Mail for OS X:
    OS X Mail: Troubleshooting sending and receiving email messages
    http://support.apple.com/kb/TS3276
    For more information, you can also visit http://www.apple.com/support/mail/
    Thanks,
    Matt M.

  • My email gets stuck in outbox, how can I send it? It won't even go into draft by saving it.

    My email gets stuck in outbox, how can I send it? It won't even go into draft by saving it.

    Hi organic4,
    Please see if the Mail Connection Doctor can help isolate the issue.
    Check ou the steps in
    OS X Mail: Troubleshooting sending and receiving email messages - Apple Support
    Thank you for visiting Apple Support Communities.
    Nubz

  • I 2 mailbox - sending email from mailbox 1 but answers enter into mailbox 2. how to solve?

    2 mailbox - sending email from mailbox 1 but answers enter into mailbox 2. how to solve?

    Mush,
    Thank you for your advice. I checked the outgoing server as suggested and found that my accounnt the gmail sever was marked offline. I changed that but the the problem was not solved. I am sending a message from [email protected] and the answer comes into [email protected] marked as Jacob Zak<[email protected] What is stange is that this happen only for certain emails not all of them.
    Thanks

  • HTTP Sender - how to read URL Parameter USER id into Mapping

    Hi,
    My scenario is HTTP - XI - ABAP Proxy.
    I wanted to capture USER id of the person who posted(HTTP) into XI(Mapping). How to read/evaluate the value of sap-user from querystring of URL ?
    http://HOST:8008/sap/xi/adapter_plain?namespace=http%3A//abc.com/sales_oa&interface=MI_sales_OA&service=DEV_D&party=&agency=&scheme=&QOS=EO&<b>sap-user=SM9999</b>&sap-password=xxxxx&sap-client=001&sap-language=EN
    please help.

    Mallik,
    Try  URL Parameters in HTTP sender communication channel.
    In the sender communication channel set Adapter Specific Message Attributes. Click on Apply URL Parameters. In Parameter1 put sap-user (U can query any URL parameter by giving its name as in the HTTP URL).
    Now in SXMB_MONI, in inbound payload SOAP Header, under Dynamic configuration u can see the value of the user. Query the same in Mapping using Dynamic Configuration using keyName as UrlParamOne.
    Regards,
    Sudharshan N A
    Message was edited by:
            Sudharshan Aravamudan

  • How do I send an attachment (photo) without it inserting itself into the body of the email?

    Under attach, I selected file and then selected a photo. It appeared as an attachment outgoing, however, it was received inserted in the body of the email. Thank you in advance.

    I think this depends on the recipient's mail client. Thunderbird, for instance, when used to view a received message with a picture attachment, will display the picture appended to the message. To a casual glance it would appear to be embedded into the message.
    Send your messages using plain text (not HTML) and images ''cannot'' be embedded. If they appear to be embedded then it's the recipient's mail client to blame and therefore beyond your control.
    You could zip your pictures to force them to be processed as attachments at the receiving end. ;-)

  • Palm Desktop 6.2.2 / Edit menu does not have Send To option (MS Vista Premium SP1 32 bit with MS Office 2007)

    I have a Palm Zire 31 and had been running the Palm Desktop 4.1.4 on a Windows XP Home SP3 computer for years.
    I recently purchased a new computer with Windows Vista Premium SP1 (32 bit) and installed the Palm Desktop 4.1.4.  Everything seemed to work fine (including the Edit -> Send To Word, which is MS Office 2007 Word) until I tried to install software on my Zire with Quick Install. That is when I found out that I needed to upgrade to Palm Desktop 6.2.2.
    I downloaded and installed Palm Desktop 6.2.2. There are a few glitches that I need to address. But the most important one to me is that the Send To command does not appear in the Edit menu (it should, according to the Palm Desktop help.)
    Does anyone know how I can get that feature (Send To Word) to work (short of reinstalling MS Office)?
    Thanks in advance.
    Stan
    Post relates to: Zire 31

    Hello Stan and welcome to the Palm forums.
    Palm Desktop 6.x was developed by ACCESS, the company that owns the source code to the Palm OS, Palm Desktop, and HotSync Manager.  When they released Palm Desktop 6.x, some of the features of the older Palm Desktop 4.x where not included.  I don't have Office 2007 installed on my computer, but the Send To comand could be one of those features that didn't make the jump from Palm Desktop 4.x to 6.x
    Alan G
    Post relates to: Treo 755p (Sprint)

  • When I use send to trash the file does not go into trash but brings up a notice to delete and if I do this it is gone forever?

    when i use send to trash it does not go into trash but brings up a message to delete and if I do it is gone forever?
    is there a cure for this?

    Have a look here: https://discussions.apple.com/message/11291053?messageID=11291053&
    Thomas A Reed's tip seems to fix the problem.

  • I use Mac book air and...Whenever I tried to send an email, the email was immediately put into the outbox... so i could never sd out an email!

    I can't send the email, whenever i try sending an email, it is put into the outbox... How can I send an email???

    Hi Ana Lo,
    Welcome to the Apple Support Communities! 
    There may be a few different troubleshooting steps that I would recommend when not being able to send an email from Mail. Please use the information and steps in the attached article to help you resolve this issue. 
    OS X Mail: Troubleshooting sending and receiving email messages - Apple Support
    Have a great day,
    Joe 

  • Why does find my iPhone send me an email saying I have logged into my account using my Apple ID?

    Since the new iOS 8.0.1 update I found that when I log into find my iPhone i then get an email saying: Your Apple ID was used to sign into Find My iPhone. It then proceeds to tell me what device it was (my one at this time) and the date and time. I do not want this setting on. I have looked into it and can't find the option to switch it off. This gives a potential thief the notification that the device is being tracked which is certainly NOT a good idea. Please help!!!!

    I have this same question.  Even if you are logging on to see where your child is, or to make sure he/she made it to school or is where they say they are it sends and email letting them know, pointless.  And as you pointed out if you lost your phone or if it was stolen then whomever has your phone has access to email and then knows you are tracking phone.  Please anyone, tell me how to remove this setting.
    Iphone 6, IOS 8

  • How can I send a .pdf in iChat without it turning into a .zip file? I just upgraded to Lion and am now having this issue.. Please help.

    Any solutions would be helpful. I have tried looking in preferences, but to no avail.

    Hi,
    It is no good smiling sweetly as I have children and it odes not work
    To explain further.
    I answer the alerts first, that I get for "New Posts" in threads I have contributed to.
    Then I read my other email.
    Then I come back to the boards to read the oldest Unread thread first.
    Not linking to the Thread to highlight there is one whilst emailing me is a bit like queue jumping.
    As you can see I do read everything eventually during each evening I spend here.
    I will keep to the email and only post here if I find the answer.  The answer should be shared.
    Speak soon.
    10:35 PM      Wednesday; January 25, 2012
    Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
      iMac 2.5Ghz 5i 2011 (Lion 10.7.2)
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb (Snow Leopard 10.6.8)
     Mac OS X (10.6.8),
    "Limit the Logs to the Bits above Binary Images."  No, Seriously

Maybe you are looking for