2LIS_06_INV Isuue
Hi All!
I Activated TransferRule 0EO78DL1RVNBN8VL2HKFNSSPN4QLS4I9 from 0LIV_DS01.
(BCT Contents)
And I got these message.
Rule (target: 0GN_LOCATIO, group: 01 Standard Group): Syntax error in routine
Rule (target: 0PRODUCT, group: 01 Standard Group): Syntax error in routine
Rule (target: 0GN_VENDOR, group: 01 Standard Group): Syntax error in routine
Rule (target: 0GN_CAT_PUR, group: 01 Standard Group): Syntax error in routine
Rule (target: 0CALMONTH, group: 01 Standard Group): Syntax error in routine
Rule (target: 0BBP_BILITM, group: 01 Standard Group): Syntax error in routine
Rule (target: 0BBP_BILLCT, group: 01 Standard Group): Syntax error in routine
Rule (target: 0LIV_AUIRCT, group: 01 Standard Group): Syntax error in routine
Rule (target: 0LIV_IVDFCT, group: 01 Standard Group): Syntax error in routine
Rule (target: 0LIV_MNIVCT, group: 01 Standard Group): Syntax error in routine
Rule (target: 0LIV_VDERCT, group: 01 Standard Group): Syntax error in routine
Rule (target: 0LIV_AMDFPR, group: 01 Standard Group): Syntax error in routine
Rule (target: 0LIV_AMDFQT, group: 01 Standard Group): Syntax error in routine
Rule (target: 0SR_IVVLC, group: 01 Standard Group): Syntax error in routine
I looked into 1 of these routine.
and found this message.
" E:Type "/BI0/OISR_SVP_LSY" is unknown "
And I searched from SDN below.
====================================
I am encountering the below error while activating the update rules of 0LIV_DS01
IC=0LIV_DS01 IS=2LIS_06_INV syntax error: The type "/BI0/OISR_SVP_LSY" is unknown
Please guide me.
Thanks.....
Oscar Romero
Posts: 1,449
Registered: 5/23/06
Forum Points: 2,794
Re: Error in Update Rules
Posted: Feb 15, 2007 12:36 PM in response to: kamal p Reply
/BI0/OISR_SVP_LSY exist in your system? Maybe any transport is missing (InfoObject OISR_SVP_LSY)
====================================
but there is no OISR_SVP_LSY infoObject from our system BCT.
Does anybody knows what's could be happening?
Thanks in advance.
Best regards.
Hi,
Just check whether the /BI0/OISR_SVP_LSY object exists/installed in your system. This kind of error comes when some object is not present in some table and if you are using the table (with /BI0/OISR_SVP_LSY as one field) in the routine. Or the infoobject itself doesnot exist in the system.
Just check the above mentioned points in your system.
REgards
Sunil
Similar Messages
-
Delta functionality for LO datasource 2LIS_06_INV for enhanced Z fields
Hi Experts,
We have enhanced standard data source 2LIS_06_INV by appending some Z fields. When we are doing full load values are getting populated for the entire Z field but when we are running delta request, values for some Z fields are not getting populated.I have put the code to extract the value for Z fields in user exit under include ZXRSAU01.
If any one have faced this isuue , Please help me out .Ur error is a very common error
need not panic
this can be solved
check whether all the v3 jobs are maintained properly or not
check whether the datasource is in active status or not
Pls assign me full points if answer satisfied to you
Regards ,
Subash Balakrishnan -
PO Qty and GR Qty is not coming for 2LIS_06_INV
Hi Expert,
I am trying to load data on 2lis_06_inv datasource but after filling the datasource, PO Qty(BSMNG) and GR Qty(WEMNG, BPWEM) fields does not contain any data but the invoice fields are contain data.
Thanks and Regards
Lalit KumarHi Expert,
I have already checked the data on R/3 side after filling the setup table and these fields are not
hidden that i've already checked but still those fields are not containing any data.
Thanks and Regards
Lalit Kumar -
How to extract data into the set-up table for 2LIS_06_INV LIS structure
We are using ECC 6.0 and SAP BI NW 2004S. I activated the 2LIS_06_INV (Invoice Verification) structure. Interestingly, I don't see any Events under this structure (MC06M_0ITM) - my understanding is the events usually determine what type of data is generated for a given structure.
I see Invoice Verification when I use the Inventory Management -Perform Setup option when doing the set-up tables. However, when I use this option, I get a message saying " No extraction structure active or no BW connected".
Can someone list the pre-requisites and the steps to load the set-up table for the 2LIS_06_INV structure.
Thanks,
Sanjay1: RSA5 Activate Data Source
2: LBWE Activate datasource again
3: SBIW Fill setup table 'Settings for Application-Specific DataSources (PI)'-> 'Initialization'->'Filling in the Setup Table'->'Application-Specific Setup of Statistical Data'->'Invoice Verification - Execute Reconstruction' -
Short dump error while filling setup tables for 2LIS_06_INV
Hi All,
I am trying to fill the setup table.While filling the stup table for 2lis_06_inv datasource, i got the Dump error after some time.
Error
Runtime Errors DBIF_RSQL_SQL_ERROR
Exception CX_SY_OPEN_SQL_DB
Short text
SQL error in the database when accessing a table.
plz can anyone help me out...Dear friends,
I tried it by giving the selection on fiscal year,but again same problem.If i give 1 0r 2 document numbers in selection then extractor works fine.
error:in detail.
Runtime Errors DBIF_RSQL_SQL_ERROR
Exception CX_SY_OPEN_SQL_DB
Short text
SQL error in the database when accessing a table.
Information on where terminated
Termination occurred in the ABAP program "SAPLMRMBW" - in "BW_RETRIEVE_DB_CO".
The main program was "RMCENEUR ".
In the source code you have the termination point in line 827
of the (Include) program "LMRMBWF01".
The program "SAPLMRMBW" was started as a background job.
Job Name....... "RMCENEUR"
Job Number..... 10524100
The termination is caused because exception "CX_SY_OPEN_SQL_DB" occurred in
procedure "BW_RETRIEVE_DB_CO" "(FORM)", but it was neither handled locally nor
declared
in the RAISING clause of its signature.
The procedure is in program "SAPLMRMBW "; its source code begins in line
806 of the (Include program "LMRMBWF01 ".
806 FORM bw_retrieve_db_co USING t_mcrbkey_bv TYPE mcrbkey_t
807 t_mcrbkey_nbv TYPE mcrbkey_t
808 t_ekbe_acc TYPE t_ekbe
809 CHANGING t_mcrbco TYPE mcrbco_t.
810
811 TYPES: BEGIN OF s_target.
812 TYPES: table_left LIKE rbco.
813 TYPES: table_right TYPE rbex.
814 TYPES: END OF s_target.
815 TYPES: t_target TYPE TABLE OF s_target.
816
817
818 DATA: t_rbco_nbv TYPE t_target,
819 t_rbco_bv TYPE t_target,
820 s_rbco TYPE s_target,
821 s_ekbe LIKE ekbe,
822 s_mcrbco TYPE mcrbco,
823 l_index LIKE sy-tabix.
824
825 * Data source: invoice item non-background
826 IF NOT t_mcrbkey_nbv[] IS INITIAL.
*>>>>> SELECT * FROM rbco AS r LEFT OUTER JOIN rbex AS i*
828 ON ( rmandt = imandt AND
829 rbelnr = ibelnr AND
830 rbuzei = ibuzei AND
831 rcobl_nr = icobl_nr )
832 INTO TABLE t_rbco_nbv
833 FOR ALL ENTRIES IN t_mcrbkey_nbv
834 WHERE r~gjahr = t_mcrbkey_nbv-gjahr AND
835 r~belnr = t_mcrbkey_nbv-belnr.
836 ENDIF.
837 * Data source: invoice item background
838 IF NOT t_mcrbkey_bv[] IS INITIAL.
839 SELECT * FROM rbco AS r LEFT OUTER JOIN rbex AS i
840 ON ( rmandt = imandt AND
841 rbelnr = ibelnr AND
842 rbuzei = ibuzei AND
843 rcobl_nr = icobl_nr )
844 INTO TABLE t_rbco_bv
845 FOR ALL ENTRIES IN t_mcrbkey_bv
846 WHERE r~gjahr = t_mcrbkey_bv-gjahr AND
Thnks in advance -
Error in Installing the Business Content for 2LIS_06_INV data source
Hi Experts,
We are trying to install the Business content for 2lis_06_inv. When we replicate the datasource, we are not seeing it in 3.x version. It is only vailable in 7 version. There is no transformation available in Business content for this data source. Please let me know how we need to proceed with this installation. Should we install the 7.0 flow or 3.x flow? Please provide th details if you have implemented th same in your system. Thanks is advance.
Regards,
Kavitha JagannathHi,
Follow bellow steps:
1. Goto RSA1.
2. Select the BI content.
3. Select the Grouping as' In Dataflow before and after'
Then,you can get the data flow which are haveing the DS/TR/Data targets.
4. Select the Install by setting the 'Install in background'.
Regards. -
2LIS_06_INV Delta Procssing with invoices blocked for payment
Hi all-
I am using the 2LIS_06_INV data source to determine invoices that are blocked for payment. The required fields I am reporting include SPGRM and SPGRP.
2LIS_06_INV picks up these fields when first blocked with transaction MIRO (setting a qty or price block during posting). However, updates to these fields using MRBR (releasing the qty or price block) are not captured in delta processing (as stated in OSS note 1494379). If the 2LIS_06_INV data source specifically does not handle delta processing of MRBR updates, how does SAP handle the reporting of blocked invoices using this data source?
Thanks!Perhaps a bit late, but interesting for future reference. I had the same issue and logged this with OSS. The response was that it was a design decision not to include MRBR, MRKO, MR11 and MR11_SHOW in the delta process for 2LIS_06_INV.
This means that you have 2 options :
- Ask SAP to create this new functionality (check note 11)
- Create a new datasource (based on the change management CDHDR and CDPOS table, I would suggest) to ensure the correct status is sent to BW (that is what we are planning to do). This can then be extracted after the 2LIS_06_INV datasource.
Regards,
Freek -
Report of Opening, Isuue, Receipt & closing stock
Dear Expert,
There is any report in which Opening, Isuue, Receipt & closing stock can be download with Qty & Value.
I had try MB5B, in which information has been download in vertical format, but we need in horizantical format same data...so there is any other option.
KaushalHello,
You can do such manipulations in Excel
In Excel
Copy
Then Edit ==> Paste Speical ==> Select transpose
Your verticals will become horizontal and
horizonals will become verticals.
Regards,
Ravi -
Enabling Early Delta Initialization option for LO DataSource 2LIS_06_INV
Hi Guyz,
I want to enable Earlt Delta Initialization option for LO DataSource 2LIS_06_INV, as of now its greyed out.
please tell me if its possible or not, and if yes then please let me know the steps in detail.
cheerz,
raps.hi,
Not all Data sources support Early Delta Initialization. Early delta initialization is done to capture the deltas when the initialization is being done between BW and source system (init with data transfer). As init with data transfer takes large time and during this time any records created will also be not captured so we do early delta initialization, also the same can be achieved by executing the init without data transfer and then loading a full repair request. The init without data transfer creats a time stamp and delta is generated for newly posted records.
regards,
Arvind. -
Data Source Enhancement for 2LIS_06_INV
Hi BW Experts,
We got a requirement. We have to work on Data Source Enhancement.
2LIS_06_INV is a LO Data Source. 3 extra fields required in existing Data Source.
That 3 Fields are available in single Table only.
I never worked on Data Source Enhancement.
Please can anyone tell me the steps.
I have read the forums but i did not understand it.
Thanks in advance
Regards,
Anjalihi anjali,
Every organisation has different structures so, the standard structure dosnt fit for all, in this situation u need to go for enhancement. based on your need u have add some field to std structure.
Check out this link...this z the best pdf for enhancing data source....
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/b0af763b-066e-2910-a784-dc6731660f46
pdf 'enhancements in sap bw' with steps
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/59069d90-0201-0010-fd81-d5e11994d8b5
Enhancement
User exit
hope it helps... -
2LIS_06_INV Extractor problem
Hi,
I Want to use Invoice Verification : 2LIS_06_INV data source. When i see description of this datasource in Businee content ,its taking data from RBKP,RBCO,RBEX,RSEG.
http://help.sap.com/saphelp_nw70/helpdata/en/57/dad06449114814919000e27dfb255e/frameset.htm
But if i see in LBWE ,maintain Datasource , It is showing RBCO,structures RBHD,RBITM,RBKEY.
why this difference. Even if i check the data in RSA3 i am not getting RBKP ,RSEG ECC data through that datasource.
Do i need to do some settings.?
Edited by: joseph reddy on Jun 17, 2009 6:14 PMHi Rick,
we are also facing the same issue .
I had raised a message with SAP OSS & after a long follow up they came back with a reply saying.
Firstly;
For all invoice documents with an entry in table RBEX with
NOQUANTITY = 'X' the following quantity related keyfigures will be
initial
MENGE, BPMNG, BPRME, MEINS, WEMNG, REMNG, BPREM, BPWEM, PEINH, NETPR,
BSMNG, BPUMN, BPUMZ.
The indicator controls whether the quantity information should
be considered or not.
Because of this indicator all quantity related information as detailed
above is deleted during the recompilation run in subroutine
BW_SET_QUANTITIES (SAPLMRMBW).
Therefore these will not be available for invoice verification.
Secondly;
Invoice documents which have been posted before the activation of the
BW extraction do not have an entry in table RBEX.
Because of the missing entry in table RBEX the system does not delete
the above listed quantity related fields.
All invoice documents which have been posted after the activation of
the BW extraction are stored in table RBEX.
So goto transaction SE16 and select the entries in table RBEX.
Look at the CPU date (CPUDT) in table RBKP for the first
invoice document listed from table RBEX.
Any document from this date backwards will not have this data.
Can you please check if this explains why this data is not available.
If so this is the standard system behaviour and will not be changed.
This reply seems very very absurd & I am still not able to digest the fact that the Logic is so logicless.
SAP says you will not get any data records for any records posted before your extractor was activated.
SO if you started implementing BI say after 5 yrs of live ECC , then it means you wont get the data for those 5 years.
this seems so senseless.
Please update me if you find anything that works or any alternate solution.
/John -
Hi,
What is the significance of COBL_NR from RBCO (table) in the extractor.
How the data processed in RBCO- COBL_NR .
As i have issue with RBCO- COBL_NR field in 2LIS_06_INV extractor.
Invoice Verification - SAP Documentation
Thanks in advanceIf you check with FI consultant you may get what you need.
other wise at RSA3 you can run your data source with debug option.
Actually what problem your facing with your data source?
data soure was not pulling data for fields COBL_NR? -
Hello Gurus,
I am trying to setup 2lis_06_inv but i am not able to understand why i am not able to get any records in the setup table.The job shows finished in few seconds.
What can be the possible reason for this?
I activated the datasource using RSA5. I setup the Update Mode to 'Direct Delta' in LBWE ( Extraction Cockpit). I deleted the data in the setup table and then ran the OLI6BW tcode and gave tomorrow's date for finishing the job and then ran the job. The job shows finished in a few seconds but no data gets into the setup tables.
Error message in log says:
Recompilation has not selected anything -> Refer to error log
Message no. MRBW015
Diagnosis
This error message was issued for one of the following reasons:
No documents exist
No selection criteria were entered
BW updating has not been activated
Any help is deeply appreciated.Hi,
Check table RBEX on R/3 side whether any entries exists in that or not.
if it does not contain any entry it will not bring any data.
Check the link.
2LIS_06_INV Extractor problem
Regards
SH -
2LIS_06_INV - Dump when loading data
Hi all!
I'm having a problem when I try to load data with IS 2LIS_06_INV. The infopackage starts in background but it seems to be very slow. Suddently the error appears:
Short dump in the Warehouse
Diagnosis
The data update was not finished. A short dump has probably been logged in BI. This provides information about the error.
System Response
"Caller 70" is missing.
Is there any error with SAP standard extrator?
Does anyone face with this problem yet?
Regards,
ThiagoThis error is thrown when the processing time for extraction is too long. In this case, it most likely was caused because of large data volumes. This can also occur if there are multiple, concurrent background jobs running on the source system.
The two most common resolutions are:
1) Wait for more background processes to free up on the source system and re-start the InfoPackage.
2) Reduce the package sizes for the extraction. -
2lis_06_inv - No data when extracting delta information
Good day,
I did an initial extract from ECC for the 2lis_06_inv DataSource and the records where extracted, when executing a delta no records are extracted. Changes have been made on ECC but these no records are added to the delta queue.
I used transaction OLI6BW to fill the setup table and no errors where reported. I have checked table RBEX and there are 4 records in this table, these are the recored which where updated.
Does anybody know why the delta queue is not being filled ?
Any help would be appreciated.Hi Srinivas,
RSA3 returns 0 records.
The Job Control in LBWE is not set, and the update mode is Queued Delta.
if I have to set the Job Control Parameters, when do I set it, after the data has been extracted into BW ? after I have run the setup in ECC ?
Regards
Lucien
Maybe you are looking for
-
Ipod 1st generation shuffle isn't recognized by iTunes
Plugged my 1st generation iPod shuffle into the USB port and it isn't showing up in iTunes. I have read through all the Troubleshooting steps and nothing seems to be working. When I go to Eject Hardware though, it shows Eject Ipod, so I know my Dell
-
Spry Photo Gallery not visible other than in Safari
Hi, I created a photo gallery using Spry using the step-by-step instructions found at http://www.adobe.com/devnet/dreamweaver/articles/spry_photo_album.html. The problem is that my gallery only can be viewed in Safari - Firefox, Netscape and Explorer
-
Spry Tabbed Panels mangled by IE
I have struggled -- and failed -- to figure out why IE mangles my Spry Tabbed Panel code even though the same code is rendered perfectly by Firefox, Safari, and Dreamweaver's Live View. If you think you can help me out, please take a look at the affe
-
Vendor evaluation - main criterion : Delivery ; Sub criterion : On time del
hi We have following requirement related to Vendor evaluation - main criterion : Delivery ; Sub criterion : On time delivery The requirement is: Deliveries late by 7 days should be considered as on time. pl suggest
-
Indicator on previous tab opened?
Is there a way to know which tab you last had open prior to the currently opened tab? Sometimes I have quite s few tabs up from the same website and it's easy to forget which tab was the last one you had open if you require to go straight back to it