2LIS_08TRFKZ and 2LIS_08TRTLP Delta Problems

Hello Experts,
We have been having problems with delta not getting captured correctly into BI with the above extractors.
Just as an example, when a shipment cost document is deleted in R/3, the corresponding record in the DSO is not deleted but the fields are initialized, leaving just the key. By the way, we are loading to custom DSO's keyed on Delivery Document and Item.
In our R/3 system, users can use LSMW in order to cancel/reverse shiipment cost documents in batch mode.
Is it possible that this is causing the problem?
Thank you for your input.

Hi Celine:
Please check if this SAP Note 496616 is applicable to your system and compare the definition of the Key Fields on your DSOs with the recommended Key Fields on SAP Note 440166.
Note 496616 - "Deleting data records in the ODS".
Note 440166 - "ODS capability for shipment and shipment costs DataSources".
In case those notes don't provide the solution to your issue, please check if your scenario is described on SAP Note 1133282.
Note 1133282 - "Initialized fields in the data part of a DataStore object".
Regards,
Francisco Milán.

Similar Messages

Why we will go for Queue delta instead of Unserialized and Direct delta ?

Hi Experts,
Why we will go for Queue delta instead of Unserialized and Direct delta ? specify any reasons for that ?
What happens internally when we use Queue delta , Direct delta ?
I will allocate points to those who help me in detail. My advance thanks who respond to my query.

Hi,
Direct Delta
With this update mode, extraction data is transferred directly to the BW delta queues every time a document is posted. In this way, each document posted with delta extraction is converted to exactly one LUW in the related BW delta queues. If you are using this method, there is no need to schedule a job at regular intervals to transfer the data to the BW delta queues. On the other hand, the number of LUWs per DataSource increases significantly in the BW delta queues because the deltas of many documents are not summarized into one LUW in the BW delta queues as was previously the case for the V3 update.
If you are using this update mode, note that you cannot post any documents during delta initialization in an application from the start of the recompilation run in the OLTP until all delta init requests have been successfully updated successfully in BW. Otherwise, data from documents posted in the meantime is irretrievably lost. The restrictions and problems described in relation to the "Serialized V3 update" do not apply to this update method.
This update method is recommended for the following general criteria:
a) A maximum of 10,000 document changes (creating, changing or deleting documents) are accrued between two delta extractions for the application in question. A (considerably) larger number of LUWs in the BW delta queue can result in terminations during extraction.
b) With a future delta initialization, you can ensure that no documents are posted from the start of the recompilation run in R/3 until all delta-init requests have been successfully posted. This applies particularly if, for example, you want to include more organizational units such as another plant or sales organization in the extraction. Stopping the posting of documents always applies to the entire client.
Queued Delta
With this update mode, the extraction data for the affected application is compiled in an extraction queue (instead of in the update data) and can be transferred to the BW delta queues by an update collective run, as previously executed during the V3 update.
Up to 10,000 delta extractions of documents to an LUW in the BW delta queues are cumulated in this way per DataSource, depending on the application.
If you use this method, it is also necessary to schedule a job to regularly transfer the data to the BW delta queues ("update collective run"). However, you should note that reports delivered using the logistics extract structures Customizing cockpit are used during this scheduling. This scheduling is carried out with the same report which is used when you use the V3 updating (RMBWV311, RMBWV312 or RMBWV313).There is no point in scheduling with the RSM13005 report for this update method since this report only processes V3 update entries. The simplest way to perform scheduling is via the "Job control" function in the logistics extract structures Customizing Cockpit. We recommend that you schedule the job hourly during normal operation - that is, after successful delta initialization.
In the case of a delta initialization, the document postings of the affected application can be included again after successful execution of the recompilation run in the OLTP (e.g OLI7BW, OLI8BW or OLI9BW), provided that you make sure that the update collective run is not started before all delta Init requests have been successfully updated in the BW.
In the posting-free phase during the recompilation run in OLTP, you should execute the update collective run once (as before) to make sure that there are no old delta extraction data remaining in the extraction queues when you resume posting of documents.
Using transaction SMQ1 and the queue names MCEX11, MCEX12 or MCEX13 you can get an overview of the data in the extraction queues.
If you want to use the functions of the logistics extract structures Customizing cockpit to make changes to the extract structures of an application (for which you selected this update method), you should make absolutely sure that there is no data in the extraction queue before executing these changes in the affected systems. This applies in particular to the transfer of changes to a production system. You can perform a check when the V3 update is already in use in the respective target system using the RMCSBWCC check report.
In the following cases, the extraction queues should never contain any data:
- Importing an R/3 Support Package
- Performing an R/3 upgrade
For an overview of the data of all extraction queues of the logistics extract structures Customizing Cockpit, use transaction LBWQ. You may also obtain this overview via the "Log queue overview" function in the logistics extract structures Customizing cockpit. Only the extraction queues that currently contain extraction data are displayed in this case.
The restrictions and problems described in relation to the "Serialized V3 update" do not apply to this update method.
This update method is recommended for the following general criteria:
a) More than 10,000 document changes (creating, changing or deleting a document) are performed each day for the application in question.
b) In future delta initializations, you must reduce the posting-free phase to executing the recompilation run in R/3. The document postings should be included again when the delta Init requests are posted in BW. Of course, the conditions described above for the update collective run must be taken into account.
Un-serialized V3 Update
Note: Before PI Release 2002.1 the only update method available was V3 Update. As of PI 2002.1 three new update methods are available because the V3 update could lead to inconsistencies under certain circumstances. As of PI 2003.1 the old V3 update will not be supported anymore.
With this update mode, the extraction data of the application in question continues to be written to the update tables using a V3 update module and is retained there until the data is read and processed by a collective update run.
However, unlike the current default values (serialized V3 update); the data is read in the update collective run (without taking the sequence from the update tables into account) and then transferred to the BW delta queues.
The restrictions and problems described in relation to the "Serialized V3 update" do not apply to this update method since serialized data transfer is never the aim of this update method. However, you should note the following limitation of this update method:
The extraction data of a document posting, where update terminations occurred in the V2 update, can only be processed by the V3 update when the V2 update has been successfully posted.
This update method is recommended for the following general criteria:
a) Due to the design of the data targets in BW and for the particular application in question, it is irrelevant whether or not the extraction data is transferred to BW in exactly the same sequence in which the data was generated in R/3.
Thanks,
JituK

2LIS_04_P_COMP and 2LIS_04_P_MATNR delta issue

Hi experts,
I am having problems with 2LIS_04_P_COMP and 2LIS_04_P_MATNR delta extraction.
I run the init, it is ok. I create an order and then I run DELTA expecting to get more record(s).
DELTA will bring no records. But if I delete set up tables LBWE, initialize them again, and then run the init again, the new records will be available.
Has someone had the same issue? I can't find the reason why the delta extraction does not bring the new records, if I don't re-setup the tables in LBWE.
Thanks in advance for your help,
Best Regards,
André Oliveira

Thanks for your help.
In job control window I do not have the green check button, only the cancel (red cross). When I try to schedule the job it gives me an error "error creating a job", so only I can do is save a start date and periodicity in job parameters. Is this ok?!
I also wrote sap a message because I am trying to enhance it with two fields (they are in LBEW), but same happens... I just see a cancel button, never a green check to validate and accept. I have done all the recomendations. I put the message I wrote below hoping you can give me some insight on this issue:
am trying to do an enhancement to extractor 2LIS_04_P_COMP.
+I go to LBWE and select these 2 fields:
MCAFKO GAMNG Qtd.teór.
MCAFKO GMEIN UM básica
The problem is that in the selection window to select these fields from
pool (scroll down box) to selection criteria (scroll down box) the
button to accept these changes does not appear (I mean the button with
the green check). So it is impossible to add this fields to the
structure. Is there any reason for this not to appear?
I think I have done everything that was needed:
LBWG: delete setup tables for 04 (production application)
RSA7: delete 04 queues
LBWQ: delete 04 queues
LBWF: check for active maintenance logs (does not exist any)+
Some points already assigned.
Best regards,
André Oliveira
Edited by: Andre Oliveira on Feb 23, 2010 12:01 PM

Initialisation option - Delta problem

Hi guys..
I tried to load my delta request and it says,no active delta initialisation is available for the data source.
I checked in the infopack->scheduler->init option for source system,and there is no init request available there.( Think got deleted accidentally)
In my target we have init request as well as delta requests for the past two months.
So how do i reccover this initialisation request..
Can i do initialisation without data transfer and then continue loading my deltas.Will it give any problem???
Thanks & Regards
Ragu

Hello ,
You can do the deltas without re-doing init. But it depends on the no. of deltas records since you have done init (populated setup) last time.
if the deltas are huge, then by just running the v3 again may overflow the delta queues!!
Due to this risk i suggested to redo the setup run.
But if you have some costraints, you dont delete the set up tables. delte from Rsa7 the delta queues for ur datasource. reschdule the v3.
again run the delta in BW. check with the reports against the R/3 tables-records(just to check if the delta queues didnt overflow and all deltas have been taken care of).
Hope this helps..
thanks,

0MATERIAL and 0CUSTOMER Delta error

Hi Gurus,
I have a problem regarding the 0MATERIAL and 0CUSTOMER Delta. It stopped due to an error in source system. When I tried to do a Repeat Delta, the system did not permit me because the Infosources does not allow update mode R (repeat). I checked previous SDN topics and found the solution.
1. Delete 'Delta Init' in Delta Channel (InfoPackage)
2. Do a Init load.
My questions are:
1. Is this the proper process or did I misinterpret the posts.
2. Would creating a new Init for the InfoSource not affect the data in the Cubes?
3. Do I have to create a Delta right after the Init?
Please advise,
Jake

Hi Jake,
1. Is this the proper process or did I misinterpret the posts.
>>Solution suggested by you is fine,
2. Would creating a new Init for the InfoSource not affect the data in the Cubes?
>> It should not affect the cube data, remember to activate your master data ( customer & material) after data load ( right click -->activate)
3. Do I have to create a Delta right after the Init?
>> you need to create delta Infopackage whenever you wish to take delta from R/3. When you do the intialization system starts tracking delta for you irrespective of whether you create delta infopackage in BW or not.
hope it helps
regards
VC
Message was edited by: VC

Generic extractor Delta problem

hello,
i have created a Generic extractor based on the AUFM table and the delta field is MBLNR (Material document no) that is a numeric pointer used for delta. My problem is that when i pull the delta not all records are being pulled. Why is that so? Can anyone give suggestions.
thanks
Laura.

Well, using Function module is one approach. I can provide you another approach.
You can create a View based on the following tables
AUFM and MKPF,
use the join condition
AUFM-MANDT= MKPF-MANDT.
AUFM-MBLNR = MKPF-MBLNR
AUFM-MJAHR = MKPF-MJAHR
In AUFM select all the fields that you want and MKPF select the "Accounting Document entry date" field which you can take it as delta field and select calday as your delta option.
Once view is created, you can generate the datasource.
Please check this option.
I think it should work...
Thanks
Vj

Copa delta problem

Hi All,
I enhanced the copa DataSource by adding the new value field,then i have loaded the data
Initial Load without data transfer then run the delta update it is give ZERO records.
When i checked in COPA table level and KE24 report level in r/3 side data is there.
Is there any problem in my delta.If is there delta problem where to check and how to resolve this.
Please help me ASAP.
Thanks in advance.
prasantha

HI Sathish,
Based on in your information i have checked in KEB2 it is giving the below error.can you help wht is this
and how to resolve this error.
the below error is keb2 tcode(based on below error i have one doubt delta is geting the data into
head level data.
Subsequent time stamp information only has statistical character.
The time stamp relevant for reading data is found in the header information for the
DataSource.
For data extraction from several BW systems, the number of records read and sent that is
displayed does not have to agree with the actual number (due to Service API logic).
Delta init simulations are not listed in the overview because the CO-PA extractor
is not called in this case and it consequently does not update any log entry.
Thanks and regards,
kumar.k
Edited by: kumar reddy on Jan 20, 2009 8:10 AM

Delta Problem while extracting the data by using function module

Hi Experts,
I have extracted the data by using Function module, for delta loads I have given Calday and additive delta in Generic delta settings, in BW side I have initialized the data after that I have given delta update option in infopackage and I made process chain also, every day process chain is running successfully but it is showing zero records, but there is a data in Data source (RSA3), means delta is not working.
What is the problem,
Is there any another settings for delta loads,
Please help me to do this,
Helpful answer will be appreciated with points,
Regards,
Venkat

Hi,
Try this delta type :NEW STATUS FOR CHANGED RECORDS.
More information from Nagesh, this information may help
1. New status for changed Records.
2. Additive delta.
New status for changed records means
New Order
order no quantity
1000 10
order changed to quntity 8. then 2 records will posted 2 BW in first case.
1000 -10
1000 8
if you come to Additve delta.
for the same case it will send the same record as
1000 10
changed records
1000 -2
this is the difference. New status with changed records should be used only in association with ODS not cube becoz we don't have overwrite option.
Additive delta we can use for ODS and Cubes with update mode Addition.
Regards,
Satya

What is the difference between qued delta update and serialized delta upda

what is the difference between qued delta update and serialized delta update?

Hi Ks Reddy,
Queued Delta:
In case of Queued delta LUW's are posted to Extractor Queue (LBWQ), by scheduling the V3 job we move the documents from Extractor queue to Delta Queue(i.e. RSA7) and we extract the LUW's from Delta Queue to BW side by running Delta Loads. Generally we prefer Queued Delta as it maintain the Extractor Log which us to handle the LUW's which are missed.
Direct Delta:
In case of Direct Delta LUW's are directly posted to Delta Queue(i.e. RSA7) and we extract the LUW's from Delta Queue to BW side by running Delta Loads. If we use Direct Delta it degrades the OLTP system performance because when LUW's are directly posted to Delta Queue (RSA7) the application is kept waiting untill all the enhancement code is executed.
Non-serialized V3 Update:With this update mode, the extraction data for the application considered is written as before into the update tables with the help of a V3 update module. They are kept there as long as the data is selected through an updating collective run and are processed. However, in contrast to the current default settings (serialized V3 update), the data in the updating collective run are thereby read without regard to sequence from the update tables and are transferred to the BW delta queue.
https://websmp102.sap-ag.de/~sapdownload/011000358700007535452002E/HOWTOCREATEGENERICDELTA.PDF (need id)
http://help.sap.com/saphelp_bw33/helpdata/en/3f/548c9ec754ee4d90188a4f108e0121/frameset.htm
Business Intelligence Performance Tuning [original link is broken]
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/cccad390-0201-0010-5093-fd9ec8157802
How to load data
/people/sap.user72/blog/2004/12/16/logistic-cockpit-delta-mechanism--episode-one-v3-update-the-145serializer146
/people/sap.user72/blog/2004/12/23/logistic-cockpit-delta-mechanism--episode-two-v3-update-when-some-problems-can-occur
/people/sap.user72/blog/2005/01/19/logistic-cockpit-delta-mechanism--episode-three-the-new-update-methods
Delta Types and methods;&#57245;
Hope this helps.
****Assign Points if Helpful*****
Regards,
Ravikanth

How do I Help Apple Care Stop Warring with Each Other and Fix the Problem with My iPhone that They Acknowledge Creating?

How Do I Help Apple US & Apple Europe Stop Warring With Each Other And Fix The Problem They Created?
PROBLEM
Apple will not replace, as promised, the iPhone 5 (A1429 GSM model) that they gave me in London, UK, with an iPhone 5 (A1429 CDMA model).
BACKGROUND
My iPhone 5 (A1429 CDMA model) was purchased this year in September on an existing Verizon Wireless (VZW) line using an upgrade. The purchase took place in California and the product was picked up using Apple Personal Pickup through the Cerritos Apple Retail Store. I will refer to this phone at my "original" phone.
The original phone was taken into the Apple Store Regent Street in London, England, UK on November 15, 2012. The reason for this visit was that my original phone's camera would not focus.
The Apple Store Regent Street verified there was a hardware problem but was unable to replace the part.
The Apple Store Regent Street had me call the US AppleCare. At first they denied support, but then a supervisor, name can be provided upon request, approved the replacement of my original phone with an iPhone 5 (A1429 GSM model) as a temporary solution until I got back in the US. And approved that the GSM model would be replaced with a CDMA model when I came back to the US. I will refer to the GSM model as the "replacement". They gave me the case number --------.
The Apple Store Regent Street gave me the replacement and took the original. The first replacement did not work for reasons I do not understand. They switched out the replacement several times until they got one that worked on the T-Mobile nano SIM card that I had purchased in England, UK. Please refer to the repair IDs below to track the progression of phones given to me at the Apple Store Regent Street:
Repair ID ----------- (Nov 15)
Repair ID ----------- (Nov 16)
Repair ID ----------- (Nov 16)
The following case number was either created in the UK or France between November 15 to November 24. Case number -----------
On November 19, 2012, I went to France and purchased an Orange nano SIM card. The phone would not activate like the first two repair IDs above.
On November 24, 2012, I went to the Apple Store Les Quatre Temps. The Genius told me that my CDMA phone should not have been replaced with a GSM model in the UK and that this was clearly Apple's fault. They had me call the AppleCare UK.
My issue was escalated to a tier 2 UK AppleCare agent. His contact information can be provided upon request. He gave me the case number -----------.
The UK tier 2 agent became upset when he heard that I was calling from France and that the France Apple Store or France AppleCare were not helping me. He told me that my CDMA phone should not have been replaced with a GSM model in the UK and that this was clearly Apple's fault.
The UK tier 2 agent said he was working with engineers to resolve my problem and would call me back the next day on November 25, 2012.
While at the Apple Store Les Quatre Temps, a Genius switched the phone given to from repair ID ----------- with a new one that worked with the French nano SIM card.
Also, while at the Apple Store Les Quatre Temps, I initiated a call with AppleCare US to get assistance because it seems that AppleCare UK was more upset that France was not addressing the issue rather than helping me. I have email correspondance with the AppleCare US representative.
A Genius at the Apple Store Les Quatre Temps switched the replacement with a new GSM model that worked on the French SIM card but would not work if restored, received a software update, or had the SIM card changed. This is the same temporary solution I received from the Apple Store Regent Street in the UK.
By this point, I had spent between 12-14 hours in Apple Store or on the phone with an AppleCare representative.
Upon arriving in the US, I went to my local Apple Store Brea Mall to have the replacement switched with a CDMA model. They could not support me. He told me that my CDMA phone should not have been replaced with a GSM model in the UK and that this was clearly Apple's fault. My instructions were to call AppleCare US again.
My call with AppleCare US was escalated to a Senior Advisor, name can be provided upon request, and they gave me the case number -----------. After being on the phone with him for over an hour, his instructions were to call the Apple Store Regent Street and tell them to review my latest notes. They were to process a refund for a full retail priced iPhone 5 64BG black onto my credit card so that I could use that money to buy a new iPhone 5 64GB black at the Apple Store Brea Mall to reoslve the problem.
The Apple Store Regent Street did not process my refund. He, name can be provided upon request, told me that the AppleCare US did not do a good job reviewing my case, that they were incapable of getting to the bottom of it like they were, and instructed me to call AppleCare US and tell them to review this case number and this repair id. I asked if he read the notes from the AppleCare US Senior Advisor and he would not confirm nor deny. When I offered to give him the case number he accepted but it seemed like would do no good. Our call was disconnected. When I tried calling back the stores automated system was turned on and I could not get back through.
Now I have the full retail price of an iPhone 5 64GB black CDMA on my credit card and Apple will not process the refund as they said they would.
I've, at this point, spent between 14-16 hours at Apple Stores or on the phone with AppleCare representatives, and still do not have the problem resolved.
SOLUTION
AppleCare US and AppleCare Europe need to resolve their internal family issues without further impacting their customers.
Apple is to process a refund to my credit card for the cost of a full retail priced iPhone 5 64GB black.
DESIRED OUTCOMES
I have an iPhone 5 (A1429 CDMA model) that works in the US on VZW as it did before I received the replacement phone in the UK.
Apple covers the cost of the solution because I did not create the problem.
Apple resolves their internal issue without costing me more time, energy, or money.
This becomes a case study for AppleCare so that future customers are not impacted like I have been by their support system.
Does anyone have recommendations for me?
Thank you!
<Edited by Host>

Thanks, but I've been on the phone with AppleCare US (where I am and live) and AppleCare UK. They continue bouncing me back and forth without helping resolve the problem.
Perhaps someones knows how to further escalate the issue at Apple?

Remote Control and Remote View Problem

Hi,
I work at a High School running Netware 6.0 SP5 and Zen works 4.01 ir7.
Remote Control and Remote View works great but I noticed one problem.
We have a logo of the school that is forced down on to the desktop when a
user logs in through group policies. This logo works perfect for the
desktop wall paper and loads every time a user logs in.
When I Remote Control or Remote View a computer the users desktop wall
paper turns from the logo being forced down through group policies to the
desktop to a blue desktop wall paper.
I would prefer the desktop wall paper staying the schools logo when I
Remote Control or Remote View because if the desktop wall paper changes to
the blue color I mentioned above when I Remote Control or Remote View the
users computer, they will know that someone is taking over their computer
which sometimes we dont want them knowing.
We have Windows 98SE computer running Novell Client 3.4 and we have some
computers running Windows XP Professional SP1 and Windows XP Professional
SP2 both running Novell Client 4.91 SP2.
The Remote Control and Remote View problem of the desktop wall paper
changing on the users computer occurs on all operating systems mentioned
above.
Is there a solution to my above problem? When Remote Controlling and
Remote Viewing someone's computer I don't want the desktop wall paper to
change.
Thanks!

Bpilon,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Do a search of our knowledgebase at http://support.novell.com/search/kb_index.jsp
- Check all of the other support tools and options available at
http://support.novell.com.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://support.novell.com/forums)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://support.novell.com/forums/faq_general.html
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/

A720 and windows 8 problems

Im trying to setup the a720 with windows 8 and have this problems: When power off the computer have all time this BSOD : SESSION_HAS_VALID_POOL_ON_EXIT Touchscreen not work.
If I run the windows 8 install, just for test, the touch is working, the problem is after install.
External hard disk not working when connect to any USB port, and unplug result in a system freeze.
Here my mini dump for error SESSION_HAS_VALID_POOL_ON_EXIT, I have the i5 model too and this not happen on that model:
Crash Dump Analysis provided by OSR Open Systems Resources, Inc. (http://www.osr.com) Online Crash Dump Analysis Service See http://www.osronline.com for more information Windows 8 Kernel Version 9200 MP (8 procs) Free x64 Product: WinNt, suite: TerminalServer SingleUserTS Built by: 9200.16384.amd64fre.win8_rtm.120725-1247 Machine Name: Kernel base = 0xfffff800`60081000 PsLoadedModuleList = 0xfffff800`6034ba60 Debug session time: Wed Nov 28 17:08:03.203 2012 (UTC - 5:00) System Uptime: 0 days 0:00:13.897 ******************************************************************************* * * * Bugcheck Analysis * * * *******************************************************************************
SESSION_HAS_VALID_POOL_ON_EXIT (ab) Caused by a session driver not freeing its pool allocations prior to a session unload. This indicates a bug in win32k.sys, atmfd.dll, rdpdd.dll or a video driver. Arguments: Arg1: 0000000000000001, session ID Arg2: 00000000000000f0, number of paged pool bytes that are leaking Arg3: 0000000000000000, number of nonpaged pool bytes that are leaking Arg4: 0000000000000001, total number of paged and nonpaged allocations that are leaking. nonpaged allocations are in the upper half of this word, paged allocations are in the lower half of this word.
Debugging Details: ------------------
TRIAGER: Could not open triage file : e:\dump_analysis\program\triage\modclass.ini, error 2
CUSTOMER_CRASH_COUNT: 1
DEFAULT_BUCKET_ID: WIN8_DRIVER_FAULT
BUGCHECK_STR: 0xAB
PROCESS_NAME: csrss.exe
CURRENT_IRQL: 0
LAST_CONTROL_TRANSFER: from fffff80060680506 to fffff800600fc040
STACK_TEXT: fffff880`05d059b8 fffff800`60680506 : 00000000`000000ab 00000000`00000001 00000000`000000f0 00000000`00000000 : nt!KeBugCheckEx fffff880`05d059c0 fffff800`603e8bb5 : fffff880`04983b40 00000000`00000000 fffff880`04983000 ffffffff`ffffffe6 : nt! ?? ::NNGAKEGL::`string'+0x36216 fffff880`05d05a10 fffff800`604a48b6 : 00000000`00000372 fffff880`04983000 fffffa80`090203c0 fffffa80`08fc4540 : nt!MiDereferenceSessionFinal+0xf1 fffff880`05d05a80 fffff800`604abe68 : fffff8a0`00142b00 00000000`00000000 00000000`00000001 00000000`00000001 : nt!MmCleanProcessAddressSpace+0x2be fffff880`05d05af0 fffff800`604ac55e : fffffa80`00000000 00000002`00000001 00000000`00000000 fffff8a0`00d0b8f0 : nt!PspExitThread+0x668 fffff880`05d05c10 fffff800`600e1dd6 : fffff800`60377180 00000000`00000080 fffffa80`090203c0 fffffa80`08fc4540 : nt!PspTerminateThreadByPointer+0x4e fffff880`05d05c60 00000000`00000000 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!KiStartSystemThread+0x16
STACK_COMMAND: kb
FOLLOWUP_IP: nt! ?? ::NNGAKEGL::`string'+36216 fffff800`60680506 cc int 3
SYMBOL_STACK_INDEX: 1
SYMBOL_NAME: nt! ?? ::NNGAKEGL::`string'+36216
FOLLOWUP_NAME: MachineOwner
MODULE_NAME: nt
IMAGE_NAME: ntkrnlmp.exe
DEBUG_FLR_IMAGE_TIMESTAMP: 5010ac4b
FAILURE_BUCKET_ID: X64_0xAB_nt!_??_::NNGAKEGL::_string_+36216
BUCKET_ID: X64_0xAB_nt!_??_::NNGAKEGL::_string_+36216
Followup: MachineOwner ---------

Ok, the problem is generated by NVIDIA VIDEO DRIVER!
Honesty I cant understand why LENOVO not choose for this machines a ivibridge CPU with HD4000 VIDEO, performance is similar, and Intel VIDEOS GPU, have 0 troubles, ATI AND NVIDIA always are very problematic.
Anyway the solution is simple:
1 Turn OFF windows update, or change to selective install.
This prevent win update install NVIDIA driver in automatic way.
2 Uninstall NVIDIA driver sand NVIDIA related stuff.
3 Restart the machine, NOT POWER OFF, just restart.
4 Now go to SYSTEM PROPERTIES > HARDWARE > DEVICE MANAGER
INSIDE DISPLAY ADPATER NOW SELECT DISABLE THE DEFAULT VGA DRIVER, NOR UNINSTALL CHOOSE DISABLE!
NOW RESTART.
After restart now touchscreen work correctly, and next time you power off the machine, not have that ugly error all time.
This not is a final solution is just a workaround until LENOVO/NVIDIA provide a final fix for this.

My 2009 macbookpro has begun running very slowly, apps freeze and pages hang ... i've run EtreCheck and there are problems but don't know how to sort

my 2009 macbookpro has begun running very slowly, apps freeze and pages hang ... i've run EtreCheck and there are problems but don't know how to sort ... ran CleanMyMac and freed up about 30GB of space but didn't help ... ran AdwareMedic so that's been sorted but the other issues that came up on the EtreCheck I need help with however i can't figure out how to paste the results on this page

thanks thomas ... here it comes
EtreCheck version: 2.1.5 (108)
Report generated December 29, 2014 at 5:03:07 PM GMT
Click the [Support] links for help with non-Apple products.
Click the [Details] links for more information about that line.
Click the [Adware] links for help removing adware.
Hardware Information: ℹ️
    MacBook Pro (17-inch, Early 2009) (Verified)
    MacBook Pro - model: MacBookPro5,2
    1 2.66 GHz Intel Core 2 Duo CPU: 2-core
    4 GB RAM Upgradeable
        BANK 0/DIMM0
            2 GB DDR3 1067 MHz ok
        BANK 1/DIMM0
            2 GB DDR3 1067 MHz ok
    Bluetooth: Old - Handoff/Airdrop2 not supported
    Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
    NVIDIA GeForce 9400M - VRAM: 256 MB
        Color LCD 1920 x 1200
    NVIDIA GeForce 9600M GT - VRAM: 512 MB
System Software: ℹ️
    OS X 10.9.5 (13F34) - Uptime: 0:5:36
Disk Information: ℹ️
    FUJITSU MHZ2320BH FFS G1 disk0 : (320.07 GB)
        EFI (disk0s1) <not mounted> : 210 MB
        [redacted]'s world too (disk0s2) / : 319.21 GB (30.39 GB free)
        Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
    MATSHITADVD-R   UJ-868
USB Information: ℹ️
    Apple Inc. Built-in iSight
    Apple Inc. iPhone
    Logitech USB Receiver
    Apple Inc. BRCM2046 Hub
        Apple Inc. Bluetooth USB Host Controller
    Apple, Inc. Apple Internal Keyboard / Trackpad
    Apple Computer, Inc. IR Receiver
Configuration files: ℹ️
    /etc/hosts - Count: 29 - Corrupt!
Gatekeeper: ℹ️
    Mac App Store and identified developers
Kernel Extensions: ℹ️
        /Library/Application Support/Roxio
    [not loaded]    com.roxio.TDIXController (1.7) [Support]
        /System/Library/Extensions
    [not loaded]    com.kensington.mouseworks.iokit.KensingtonMouseDriver (3.0) [Support]
        /System/Library/Extensions/KensingtonMouseDriver.kext/Contents/PlugIns
    [not loaded]    com.kensington.mouseworks.driver.ADBID32Mouse (3.0) [Support]
    [not loaded]    com.kensington.mouseworks.driver.ADBID32MouseX1 (3.0) [Support]
    [not loaded]    com.kensington.mouseworks.driver.ADBID4Mouse (3.0) [Support]
    [not loaded]    com.kensington.mouseworks.driver.ADBID4MouseX1 (3.0) [Support]
    [not loaded]    com.kensington.mouseworks.driver.KMWBluetoothHIDMouse (3.0) [Support]
    [not loaded]    com.kensington.mouseworks.driver.KMWBluetoothOldHIDMouse (3.0) [Support]
    [not loaded]    com.kensington.mouseworks.driver.KMWUSBHIDMouse (3.0) [Support]
    [not loaded]    com.kensington.mouseworks.driver.USBMouseX1 (3.0) [Support]
    [not loaded]    com.kensington.mouseworks.driver.VirtualMouse (3.0) [Support]
    [not loaded]    com.kensington.mouseworks.driver.VirtualMouseX1 (3.0) [Support]
    [not loaded]    com.kensington.mouseworks.iokit.KensingtonMouseDriverX1 (3.0) [Support]
Startup Items: ℹ️
    AdobeVersionCueCS2: Path: /Library/StartupItems/AdobeVersionCueCS2
    Firewall: Path: /Library/StartupItems/Firewall
    RetroRun: Path: /Library/StartupItems/RetroRun
    Startup items are obsolete in OS X Yosemite
Launch Agents: ℹ️
    [not loaded]    com.adobe.AAM.Updater-1.0.plist [Support]
    [loaded]    com.adobe.CS4ServiceManager.plist [Support]
    [loaded]    com.adobe.CS5ServiceManager.plist [Support]
    [invalid?]    com.oracle.java.Java-Updater.plist [Support]
Launch Daemons: ℹ️
    [loaded]    com.adobe.fpsaud.plist [Support]
    [invalid?]    com.adobe.SwitchBoard.plist [Support]
    [loaded]    com.adobe.versioncueCS3.plist [Support]
    [loaded]    com.adobe.versioncueCS4.plist [Support]
    [running]    com.atomicbird.macaroni.launchd.plist [Support]
    [loaded]    com.macpaw.CleanMyMac2.Agent.plist [Support]
    [invalid?]    com.oracle.java.Helper-Tool.plist [Support]
    [loaded]    com.prosofteng.DriveGenius.locum.plist [Support]
    [loaded]    com.skype.skypeinstaller.plist [Support]
User Launch Agents: ℹ️
    [loaded]    com.adobe.AAM.Updater-1.0.plist [Support]
    [loaded]    com.adobe.ARM.[...].plist [Support]
    [loaded]    com.adobe.ARM.[...].plist [Support]
    [loaded]    com.google.keystone.agent.plist [Support]
    [loaded]    com.macpaw.CleanMyMac2Helper.diskSpaceWatcher.plist [Support]
    [loaded]    com.macpaw.CleanMyMac2Helper.scheduledScan.plist [Support]
    [loaded]    com.macpaw.CleanMyMac2Helper.trashWatcher.plist [Support]
    [running]    com.prosofteng.DGMonitor.plist [Support]
    [running]    ws.agile.1PasswordAgent.plist [Support]
User Login Items: ℹ️
    CNQL1210_ButtonManager    ApplicationHidden (/Library/CFMSupport/CNQL1210_ButtonManager.app)
    System Events    ApplicationHidden (/System/Library/CoreServices/System Events.app)
    Mail    Application (/Applications/Mail.app)
    Firefox    Application (/Applications/Firefox.app)
    AdobeResourceSynchronizer    ApplicationHidden (/Applications/Adobe Reader 9/Adobe Reader.app/Contents/Support/AdobeResourceSynchronizer.app)
    Calendar    Application (/Applications/Calendar.app)
    Skype    Application (/Applications/Skype.app)
    Dropbox    Application (/Applications/Dropbox.app)
    AdobeResourceSynchronizer    ApplicationHidden (/Applications/Adobe Reader.app/Contents/Support/AdobeResourceSynchronizer.app)
    MouseWorks Background    Application (/Library/Application Support/Kensington/MouseWorks.prefPane/Contents/Resources/Support/MouseWorks Background.app)
Internet Plug-ins: ℹ️
    AdobePDFViewerNPAPI: Version: 11.0.10 - SDK 10.6 [Support]
    Flash Player: Version: 16.0.0.235 - SDK 10.6 [Support]
    EPPEX Plugin: Version: 3.0.0.0 [Support]
    AdobePDFViewer: Version: 11.0.10 - SDK 10.6 [Support]
    ContentUploaderPlugin: Version: 1.2 [Support]
    iPhotoPhotocast: Version: 7.0
    RealPlayer Plugin: Version: Unknown [Support]
    PDEPrint: Version: 2.0 [Support]
    DirectorShockwave: Version: 11.5.2r602 [Support]
    PDF Browser Plugin: Version: 2.4.2 - SDK 10.2 [Support]
    FlashPlayer-10.6: Version: 16.0.0.235 - SDK 10.6 [Support]
    QuickTime Plugin: Version: 7.7.3
    CANONiMAGEGATEWAYDL: Version: 3.0.0.2 [Support]
    DivXBrowserPlugin: Version: 1.3 [Support]
    Silverlight: Version: 5.1.30514.0 - SDK 10.6 [Support]
    Google Earth Web Plug-in: Version: 6.0 [Support]
    Default Browser: Version: 537 - SDK 10.9
    Flip4Mac WMV Plugin: Version: 3.2.0.16   - SDK 10.8 [Support]
    JavaAppletPlugin: Version: 14.9.0 - SDK 10.7 Check version
    OfficeLiveBrowserPlugin: Version: 12.3.6 [Support]
User internet Plug-ins: ℹ️
    QuickTime Plugin: Version: 6.5.1
    fbplugin_1_0_0: Version: Unknown [Support]
Safari Extensions: ℹ️
    Ultimate [Installed]
3rd Party Preference Panes: ℹ️
    ASM [Support]
    DivX [Support]
    Flash Player [Support]
    Flip4Mac WMV [Support]
    Macaroni [Support]
Time Machine: ℹ️
    Skip System Files: NO
    Mobile backups: OFF
    Auto backup: NO - Auto backup turned off
    Destinations:
        G-DRIVE Mini [Local]
        Total size: 999.86 GB
        Total number of backups: 7
        Oldest backup: 2014-07-09 00:13:07 +0000
        Last backup: 2014-12-10 22:18:57 +0000
        Size of backup disk: Excellent
            Backup size 999.86 GB > (Disk size 0 B X 3)
Top Processes by CPU: ℹ️
         6%    WindowServer
         3%    firefox
         1%    mds_stores
         0%    mdworker
         0%    Skype
Top Processes by Memory: ℹ️
    348 MB    firefox
    137 MB    Skype
    122 MB    mds_stores
    120 MB    com.apple.IconServicesAgent
    73 MB    Dropbox
Virtual Memory Information: ℹ️
    1.26 GB    Free RAM
    1.74 GB    Active RAM
    477 MB    Inactive RAM
    543 MB    Wired RAM
    503 MB    Page-ins
    0 B    Page-outs
Diagnostics Information: ℹ️
    Dec 29, 2014, 04:58:09 PM    Self test - passed
    Dec 29, 2014, 10:58:04 AM    /Library/Logs/DiagnosticReports/Keychain Access_2014-12-29-105804_[redacted].hang
    Dec 29, 2014, 10:54:33 AM    /Library/Logs/DiagnosticReports/Keychain Access_2014-12-29-105433_[redacted].hang
    Dec 29, 2014, 10:52:33 AM    /Library/Logs/DiagnosticReports/Keychain Access_2014-12-29-105233_[redacted].hang
    Dec 29, 2014, 10:50:24 AM    /Library/Logs/DiagnosticReports/Keychain Access_2014-12-29-105024_[redacted].hang
    Dec 29, 2014, 10:50:24 AM    /Library/Logs/DiagnosticReports/Skype_2014-12-29-105024_[redacted].hang

Here. Hi I buy pack but the problem is you already purchased in-app purchased but it hasn't been downloaded pls fix it for me and I buy before 15 days pack 19,99 and 4,99 and the same problem in game world strike

Hi I buy pack but the problem is you already purchased in-app purchased but it hasn't been downloaded pls fix it for me and I buy before 15 days pack 19,99 and 4,99 and the same problem want or were can I fit it pls

The e-mail for World Strike support is: [email protected]
You need to contact them with your questions.

PHP and MySQL Connection problem

I am trying to make a PHP MySQL on a remote server connection in Dreamwesaver CS3.
When I enter the information (host, user, password, etc.) and hit TEST, I get the following error message.
"Access Denied. The file may not exist, or there could be a permission problem. Make sure you have proper authorization on the server and the server is properly configured."
I know the user, password, etc. work, as I can access the MySQL database with other software.
I checked with my host and they say there are no permission problems on their end.
I have checked the settings on the Test Server page in Site Setup and everything looks correct and works there.
I have not seen this particular problem described in other forum postings (although there are a LOT of postings on this topic!).
Any help would be appreciated.

I thought my testing server was the remote server and is always on as far as I know. I don't know how to turn it on or off.
Is there some other testing server that I should be aware of?
Frank
Date: Wed, 3 Jun 2009 15:43:02 -0600
From: [email protected]
To: [email protected]
Subject: PHP and MySQL Connection problem
I know you are using remote, but is your testing server on? if not turn that on and see if that does it. it just happened to me working on remote server and could not get mysql conn to work, until I turn on my testing (developer server), then I was able to connect to mysql and the tables that I created in phpmyadmin remotly was downloaded.
>

2LIS_08TRFKZ and 2LIS_08TRTLP Delta Problems

Similar Messages

Maybe you are looking for