2nd Sequence - it does not auto nefresh/auto-adjust

I added a second sequence to my time line today, and then later, went back and edited that 2nd sequence, but it doesn't auto-refresh on the timeline. I had to remove the second sequence and then place it back on the time line in order for changes to be reflected.
Does anyone know if CS4 will have a fix for this ? perhaps it was one of the things they updated.
Dave.

Good morning gentlemen,
I guess I shouldn't try writing emails so late at night :-)
Ok, here I go again.
On video 1 track I have a video of a few minutes.
this is sequence 1
I then wanted to have an animated logo to show up over that video on the time line. So, I created a 2nd sequence, ( sequence 2 ) and now added my 6 frame animation to this new sequence, and repeated it 10 times so I had a total of 60 frames. So far so good, so I then took that sequence 2 and added it to the time line and played the video. The animated logo was far too short, it didn't last the entire length of the video. So, I went back to sequence 2 and added more frames of animation to make the duration longer. I then went back to the video, and played it, and of course, the sequence had not updated, the length was still the same. I needed to remove sequence 2 and then add it again, for the changes to take effect.
I hope this clears up my muddled writing of last night :-)
Dave.

Similar Messages

Snow Leopard does not auto adjust time for digital camera

For some reason when I connected my digital camera this morning to auto adjust its time to reflect DST I ended up having to do it manually. Is this not a feature of SL? I did this a hundred times in Tiger without hassles. Maybe I am missing something. I am not using iPhoto for my imports.

I'm curious what software you are referring to. I doubt this is the fault of SL but rather a change in the Canon software. I know Canon's "Camera Window" has changed over the last while if that is what you are referring to but I don't remember seeing a time setting in it ever. Can you look back at the name and version of the software you are referring to?

Reporting Services Webpart - web part does not auto render consistantly

We are on SharePoint 2010 (integrated with Reporting Services)- on several sites we have added the Reporting Services Web Part and with a saved parameter. The behavior of this web part is not consistent. There are times when I open up a site
and the web part will auto render the report. 5 minutes later I can go into the same site, and the web part does not auto render the report. I have to do edit page, or close and re-open the web site. Has anyone experienced this type of behavior.
I've looked for assistance with this issue on-line cannot find anything that specifically addresses this issue.

Hi Karen,
If the parameters have default values in the report, then the report can be rendered automatically.
For this issue, I recommend to verify the things below:
Does this issue occur when you open the page with the web part in a new tab in the browser or go back to the previous opened tab?
Does this issue occur in the server side or client side?
Please add the site to trusted sites in Internet Explorer to see how it works.
Please change another browser to see how it works.
For narrowing down the issue scope, please test with another report and compare the results.
Thanks,
Victoria
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Mac Pro does not auto-sleep (manual sleeping if fine!)

I have a small annoyance with my 2009 (Nehalem) Mac Pro I am wondering if someone can help with, or suggest something, please:
The Mac Pro does not auto-sleep; ever. I have played around with the sleep time settings, and enabled or disabled the 'sleep drives' option, but to no avail. Mac Pro will stay on, no matter if I am logged on OR even on the 'log on users' screen.
That said, I can sleep the Mac Pro manually at any time, and without any problems; it stays asleep without a hitch, and wake-up is flawless.
There is nothing in the console log that would tell me why the auto sleep doesn't function. I deleted the sleep plist and re-set, but again, no change.
Any ideas? Not sure what could signal the system to not do auto-sleep?
It's running 10.6.3.
Cheers,
Dan

Exactly the same problems as those described above: forced sleep works (by using the power button or closing the lid) but automatic sleep doesn't (using 'Energy Saving' preferences).
Tried every single piece of advice here and on other posts: reset PRAM/ SMC, verified disc, repaired permissions, deleted the power saving preference files, cleared caches & history, restarted in every conceivable mode... The only things that worked were safe boot and creating a new user account which means it must be a software issue.
Disabled/ removed/ paused/ reinstalled every piece of software I could but to no avail. The most frustrating thing? Having to wait for 5 mins every time I tried something to check whether the damned thing was going to go to sleep.
In the end, and in desperation, I took the advice of Dino X and downloaded PleaseSleep. Success! A genius piece of software. It forces sleep when the Energy Saver preferences cut in but, even if I don't set exceptions, it won't force sleep if there's a DVD playing (for example).
Only had the Mac for a few months and I'll never go back to that other, unmentionable operating system; the Mac's just too good but I'm vexed that I'm having to use third party software to get it to work as it should (and was) - feels like a bit of a Win*s solution to me.

Wi-fi connection does not auto connect on 21.5-inch mid 2010 imac help?

Wi-fi connection does not auto connect on 21.5-inch mid 2010 imac running OS X 10.8.3 (12D78) help? My wife's imac with OS X 10.6.8 has no problem getting on wi-fi automatically as well as my Ipad 2 running iOS 6.1.2

If you get a green light then you did not do a factory reset - you must disconnect all wires and follow the instructions above - you will end up with the Extreme blinking yellow - then use the Airport utility to set up the Extreme - you can put in your own names for the network, device etc. - when it comes to the passwords you can use ones of your own choice - it is not asking for the old one - if it is then it was not reset completely - try to reset again if necessary - it may take more than one try - if it still asks for a password then use "public" - it is the default - once you have set it up with your new information, and you have a green light, test the connection with your computer - if you can access the internet then you are all set - then try to a use the Apple TV with the new password - if the computer still asks for a password, then it is asking for the computer password and not the extreme or network password - I can't help you with that - you would have to ask that question on the iMac discussion group.

Phone does not auto download email

Hello, I have tried to use the 'push' setting and reduced my mail download frequency, however it still does not auto download email. I always have to manually downlload.
Can anyone offer any suggestions ?
Thank you kindly.

Go to settings and turn on automatic synchronization.
SonyEricsson K300, SonyEricsson K510i, SonyEricsson W200i, SonyEricsson K530i, SonyEricsson W380i, SonyEricsson XPERIA mini pro, SONY XPERIA acro S, SONY XPERIA SP (that's the last one beleve me)

Dreamweaver does not auto-complete /script tag

Dremaweaver CS5 Version 11.0 Build 4993 - does not close script tag. I type <script> include the text then type </ and the Script tag is NOT closed.
When I type </ the script tag should complete and close automatically.
So, for example:
<script type="text/javascript" language="javascript">
function closeThisWindow() {
window.close();
</
I have to type </script> because it does not auto-complete.
Thanks,
Don.

Good morning all,
Ok, Jon, thank you. I've not used a lot of </ within the scripts that I've written so, so far, that hasn't been a problem for me. Your explanation makes sense though. It also explains why it works if you select the option to: close after typing the opening tag's ">". Because once the opening and closing tags have been populated, entering </ would have no effect on the scripot tag at all.
Very nice response Jon. This behavior is crystal clear now and in fact, it seems to be a feature, not a bug.
Thank you,
Don.

Wireless keyboard does not auto setup with a mac mini

I have just bought a mac mini and am trying to set it up, the only keyboard I have is the apple wireless keyboard. I have switched the Mac on and it finds the "magictrack pad" but does not seem to find the key board. The keyboard light flashes for the the 3 minutes looking for something to pair with - I have managed to pair it with my iPad (and remove the pairing - afterwards) but it does not auto-pair with the "new" Mac. The problem is that I cannot go any further (to allow me to complete the full setup procedure) without filling in the information that is required and I cannot fill in the information required without a keyboard. I do not have a USB (or any other keyboard) so I seem to be a little stuck. - Any ideas would be gratefully received.
Is there any way of connecting a PC laptop to the Mac Mini and use the keyboard on the PC?

Not sure what your process was but try this.
Make sure the Mini is off. Hold down the button
on the keyboard to make sure it is off. Next
start the Mini and as soon as you hear the
start up chime, press the power button on the
keyboard. Be sure not to press any other keys.
For what ever reason, timing is critical with the
keyboard pairing at boot time. This is only an
issue when doing things that require a keyboard
at boot. Once paired, it connects fine when normally
booting.

Document Sequence Information Does not Exist for Bank Account

Hello,
Oracle E-Bus Suite: 11.5.10.2
OS: Windows 2003
We are facing the problem while executing the ARPLABIM - Bank Statement Import program, 'Document Sequence Information Does not Exist for Bank Account'.
We have already reviewed Oracle Metalink Document: Document Sequence Information Does not Exist for Bank Account: Doc ID: Note:147773.1.
https://metalink.oracle.com/metalink/plsql/f?p=130:14:3345134018905587318::::p14_database_id,p14_docid,p14_show_header,p14_show_help,p14_black_frame,p14_font:NOT,147773.1,1,1,1,helvetica
But the profile option Sequential Numbering cannot be set to Not Used due to certain funcational limitations. Please advise any other workaround.
Thank you

Adith,
There are only two options:
1. Setup document Sequence. OR
2. Change the profile either the user level who runs this program (assuming a batch user name) or at the resp or application level. Not necessarily at the site level.
Thanks
Nagamohan

IP : Forecast function error. "Sequence %ADHOC does not exist"

I have created a forecast function which would use Periods(08,09 & 10) to forecast periods 11 & 12. When I test the function using the Planning Wizard, I get an error message "Sequence %ADHOC does not exist" . Any inputs ? I have put a debug breakpoint in the Class : CL_RSPLFC_FORECAST but the control is not even getting there. Thanks.

Hi,
did you try to create a planning sequence in the modeler, include you function there and test it in modeler?
I had once a problem, that a function in planning modeler and wizard did not work, but it worked in the web template, so if it does not work in planning modeler, you might even try it in a web template.
regards
Cornelia

I have 2 email addresses on the phone. How come only one accepts a alert tone. When I receive an email from 2nd email it does not notify me of its arrival. What am I doing wrong

I have 2 email addresses on the phone. How come only one accepts a alert tone. When I receive an email from 2nd email it does not notify me of its arrival. What am I doing wrong?

Each email account can have its own alert or notification settings.
Settings > Notifications > Mail > tap on each account and set the alerts you want.

Since installing the latest Itunes my phone does not auto sync as before, how can I set this up?

Since i updated to the newest ITunes my phone does not automatically sync as it did before. I am not able to locate my pictures or music or apps to set to auto sync. I receive no message that tells when the phone was last backed up to ICloud. I have several songs on ITunes under ICloud that are in the waiting status. This is all confusing. I have clicked on every available option.
Thank you

I'm afraid at this point a backup can't be created anymore and the phone has been damaged too much by the water.
You'll have to get it replaced and use the latest existing backup you have.

External Hard Drive connected to AEBS does not auto mount

Just upgraded from Tiger 10.4.11 to Leopard 10.5.5. I have a AEBS running 5.3.2 airport utility with a LaCie HD connected to it.
In Tiger, my external hard drive would auto mount onto the desktop every time the computer turned on or woke up from sleeping etc.
In Leopard, my external drive will not auto mount. It does not show up in the sidebar under devices. It does not show up in the disk utility. To access it, I have to go the the finder sidebar, select my AEBS under shared, then select my HD. Also, I did check show connected servers and external disk on the desktop in the finder preferences. Also, not sure if this matters but the icon on my external drive on my desktop is the blue drive with three people holding hands and not the brighter blue one with the wireless signal logo.
In tiger my external HD basically acted like any other folder that was always there and not like a networked drive that I had to go and connect to. I want to go back to that. I heard this has to do with leopord no longer having the airdisk utility??
thanks

Try making an alias of one of the top-level folders in your external (AEBS-connected) drive, drag it to the desktop, and then put it in your Login Items.
--> System Preferences/Accounts/Login Items
You can simply drag the folder alias into the Login Items window.
When you next log in, the folder will be automatically opened. Alas, it doesn't give you instant access to the entire external drive, but you can back out a level to see the entire drive. It isn't quite what you had with Tiger, but perhaps it will suffice.
If you leave the aliased folder on your desktop, you have a skinny approximation to the mounted volume that you had with Tiger.

PSWATCHSRV does not auto-restart causing app server domain instability

Current environment:
- Solaris 10
- Oracle 10.2.0.4
- PS HRCS 9.0
- PTools 8.49.19
- Weblogic 9.2
- Tuxedo 9.1
We have two PIA web sites that reside on the same PIA web domain. They each interact with a different app server domain residing on csapp81. One is assigned a jolt listening port of 9060 (CS90SBX) and the other uses 9030 (CS90UNT). Recently, after patching the PTools to 8.49.19, we discovered that occasionally the PSWATCHSRV in one of the app server domains will shut down and not restart. The domain continues to run without the WATCHSRV but then erratic behavior in the PIA is observed:
- Users attempting to access worklists are logged off
- Reports stop posting from PSNT and PSUNX
- Users attempting to navigate to reports already posted are logged off with "An Error Has Occurred" message
- Some users are unable to log in and see a message in red on the signon page: bea.jolt.ServiceException
Re-booting the app server domain will solve the problem temporarily until the PSWATCHSRV shuts down again. We have noticed that in the app server that is not affected, the PSWATCHSRV restarts one second after shutting down whereas in the affected domain it never auto-restarts. We have tried re-building the web server and app server domains but this does not affect the problem. There appears to be no difference between the two domains. In fact a couple of weeks earlier SBX was working fine and UNT was affected. Now it's the exact opposite and we have another environment (CFG) showing the same behavior.
The proof the problem exists:
Verified the issue by the application server log file <APPSRV_0602_SBX.LOG>, which displays that PSWATCHSRV has been shutdown and never restarted:
PSAPPSRV.11610 (3) [06/02/09 12:48:40 GetCertificate](3) Returning context. ID=PS, Lang=ENG, UStreamId=124840_11610.3, Token=PSFT_HR/2009-06-02-05.48.40.000003/PS/ENG AAAAmwECAwQAAQAAAAACvAAAAAAAAAAsAARTaGRyAgBOZQgAOAAuADEAMBTG0ddiK9wa09fTauVpwsrNvqJDmwAAAFsABVNkYXRhT3icPcZNDkAwFEXh02oM7YS8VAkL8DMSwdzILi3O6xu4J/lygcf5IuDQ+Tcb2DlLJjaWKn9mLm5WjkREtJFa7c1odjQkBlNU+Wv5APmFCio=
PSWATCHSRV.11609 (0) [06/02/09 12:52:38] Shutting down
PSAPPSRV.11612 (29) [06/02/09 12:55:45 [email protected] (NETSCAPE 7.0; WINXP) ICPanel](3) (PublishSubscribe): PublicationManager::Publish(): publication a18e2838-4f31-11de-9268-83dc49eeb5cf.USER_PROFILE published in 0.0900 seconds
My question is: Has anyone else ever seen this behavior in an 8.49.19 environment? If so, how was it resolved?
We are now conducting UAT and the occasional disruption of having to restart the app server just so people can login to the system is not making a good impression on the customer.
We have an open SR ticket with Support but as yet they have not been able to help us...

Looks like Tuxedo is not doing he's job. You should double check the Tuxedo version and rolling patch installed.
And also the configuration of AppServer, section "PSWATCHSRV", if the interval is set to 0, then it is disabled.
Moreover, from your output it is difficult to understand what's going wrong.
Nicolas.

Photoshop and Bridge CS5 does not auto rotate SOME images.

Photoshop and Bridge CS5 does not rotate SOME of my vertical images. Most other photos taken in the same time frame and with the same camera display perfectly.
Orientation is checked for display under Preferences, Metadata, Camera Data.
There also seems to be a discrepancy how Orientation is described under Metadata for those images which DO auto rotate : sometimes it is -90 (which is how I hold the camera for verticals and which displays on most verticals) and sometimes it is "normal" even when it has auto rotated the image. I do not understand this difference.
"Normal" is also used to describe the orientation of those images which DO NOT auto rotate for viewing.
The photos in questions were taken using a Nikon D-300 which is programmed to indicate the orientation of the camera and has always been programmed to do so.
I know I can manually change the orientation but we are talking about hundreds of images (I have over 10,000 photos in all; most of which display fine).
What should I be looking for to explain and correct this issue?
I appreciate anything you can do to help. Thank you.

Thanks for responding to my query. I'll check out the thumbnail size.
It is just so curious that 90% of the verticals auto rotate and the rest do not. The ones that do not rotate are even from different years (other images in those years work fine), although all taken with the same camera.

2nd Sequence - it does not auto nefresh/auto-adjust

Similar Messages

Maybe you are looking for