Wireless keyboard does not auto setup with a mac mini

I have just bought a mac mini and am trying to set it up, the only keyboard I have is the apple wireless keyboard. I have switched the Mac on and it finds the "magictrack pad" but does not seem to find the key board. The keyboard light flashes for the the 3 minutes looking for something to pair with - I have managed to pair it with my iPad (and remove the pairing - afterwards) but it does not auto-pair with the "new" Mac. The problem is that I cannot go any further (to allow me to complete the full setup procedure) without filling in the information that is required and I cannot fill in the information required without a keyboard. I do not have a USB (or any other keyboard) so I seem to be a little stuck. - Any ideas would be gratefully received.
Is there any way of connecting a PC laptop to the Mac Mini and use the keyboard on the PC?

Not sure what your process was but try this.
Make sure the Mini is off. Hold down the button
on the keyboard to make sure it is off.   Next
start the Mini and as soon as you hear the
start up chime, press the power button on the
keyboard.  Be sure not to press any other keys.
For what ever reason, timing is critical with the
keyboard pairing at boot time.  This is only an
issue when doing things that require a keyboard
at boot.  Once paired, it connects fine when normally
booting.

Similar Messages

  • Wireless keyboard does not work after waking up from idle

    After MacBook Air went to sleep, wireless keyboard does not properly connect to MacBook - I can wake the MacBook up, but meaningless numbers are sent, and I cannot type in my password. Have to "open" MacBook, and use keys - disconnect and re-connect wireless keyboard. I also use Magic Mouse and it works flawlessly. Problem is small but annoying. Any help?

    After MacBook Air went to sleep, wireless keyboard does not properly connect to MacBook - I can wake the MacBook up, but meaningless numbers are sent, and I cannot type in my password. Have to "open" MacBook, and use keys - disconnect and re-connect wireless keyboard. I also use Magic Mouse and it works flawlessly. Problem is small but annoying. Any help?

  • The HP (USB connected) and Epson (wireless) printers keep losing their connection with my Mac mini.  I have to physically disconnect the HP and then reconnect for the Mac to find it.  Turning off the wireless Epson doesn't work.  All software is updated.

    My HP (USB connected) and Epson (wireless) printers keep losing their connection with my Mac mini.  I have to physically disconnect the HP and then reconnect for the Mac to find it.  Turning off the wireless Epson doesn't resolve anything.  All software/drivers have been updated.

    My HP (USB connected) and Epson (wireless) printers keep losing their connection with my Mac mini.  I have to physically disconnect the HP and then reconnect for the Mac to find it.  Turning off the wireless Epson doesn't resolve anything.  All software/drivers have been updated.

  • TS3048 My wireless keyboard does not turn on. Yes batteries are new and installed correctly

    I don't know why my wireless keyboard is not working. I can't sign onto my computer.  Installed new batteries and yes they are installed correctly.  I'm wondering if maybe it doesn't work anymore. It's only a couple of years old!

    Hi, Mike.  
    Thank you for visiting Apple Support Communities.  
    I understand that your keyboard is not functioning.  Here is a troubleshooting article that I would recommend going through for this.  
    Troubleshooting wireless mouse and keyboard issues
    -Jason H.  

  • Volume controls on my Apple BT Keyboard do not control volume on my Mac Mini

    I just updated the OS on my Mac Mini to Yosemite and everything was working fine, but earlier today the volume control buttons on my Apple BT Keyboard stopped controlling the volume on my Mac Mini. I was watching a movie just last night and the keyboard controlled the volume just fine. So the keyboard WAS working fine for a few hours after I installed Yosemite.
    When I press the volume buttons I get the screen display for sound and instead of the up and down volume that I usually get when repeatedly pressing the volume button I get a zero with a line through it. The same thing happens when I press the mute/unmute button so the computer is not muted. And it's not an issue with the F key settings in preferences because the volume buttons DO get a response and display on the screen, but the volume doesn't change and, as I said, instead of the up/down scale I get the zero with a line through it.
    I can change the volume using the mouse and sliding the volume slider in ITunes up or down, but that's the only way. Also, strangely, the volume icon in the Apple bar at the top of my screen is grayed out. When I click on it, the slider shows volume all the way up and it's grayed out. And if I click and drag to try and change that slider, it doesn't respond.
    Basically, it appears that the keyboard is, in some ways, not compatible with the computer. I'm typing with the keyboard now, and all the other buttons work except for the volume up/down/mute buttons. Even the change track, play/pause buttons work just fine. So it's not specific to the music controls. And again, I DO get that display for volume when I press volume up/down/mute with the zero and line through it.
    I've owned Macs for over 10 years and this is the first time I've seen this. Very, very strange so any help possible is appreciated.

    Try booting in Safe Mode
    OS X: What is Safe Boot, Safe Mode?
    Next, reset the SMC and NVRAM
    Intel-based Macs: Resetting the System Management Controller (SMC)
    About NVRAM and PRAM

  • Wireless keyboard does not work with Safari.

    Space bar does not work when using Apple Wireless Keyboard with Safari to fill web forms.
    No problem with Firefox.
    Early 2008 iMac, 10.10.1, 6GB Ram

    Im going to assume you are using the Apple Wireless Keyboard with your devices.
    Whats probabaly happening is both of your devices are trying to connect to your keyboard at the same time and it is causing it to not function properly.
    I suggest you disable bluetooth on the device you AREN'T using and try it again with the one you ARE using.
    If this doesn't solve your issue, try re-pairing the keyboard with the iPad you wish to use it with. It may have just not made a strong connection.
    Hope these suggestions help!

  • KG 1061 Wireless Keyboard Does not work

    Key "a" stopped working after I haven’t used my computer for a week. Other keys seem fine.
    It was working fine before. I’ve tried replacing batteries, uninstalling the keyboard and updating driver. Nothing works. Please help!

    Hello @Francescalam,
    Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
    I have read your post on how the wireless keyboard on your desktop computer does not work, and I would be happy to assist you in this matter!
    To re-enable the wireless keyboard for your system, I recommend following the steps in this document on Wireless Keyboard and Mouse Troubleshooting.  
    Please re-post with the results of your troubleshooting, and I look forward to your reply!
    Regards
    MechPilot
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

  • Alu Keyboard does not work properly with OS Tiger 10.4.11

    Hi Folks,
    I bought a 'new' second hand wireless Alu Keyboard (apparely latest type). Unfortunately I do not get the hotkeys for media files, like 'play / stop' and 'quick forward - backward' or 'silence' and 'increase and decrease volume' working.
    The system software does not allow me to adjust those keys, e.g. dashboard I could change to F4, where it belongs, but not the other ones.
    I loaded the latest OS Tiger 10.4.11 and also the KeyboardSoftwareUpdate1.2.dmg already.
    Any idea what I do wrong or what else can help?
    Thanks and best regards,
    Stephan
    Message was edited by: mac_cognomen

    Some of the latest keyboard & mouse hardware require OS X 10.5.x+ to be
    running the computer they would be expected to work with, in order to have
    all of their features and functions work correctly.
    Note the product information in Apple Support for the questionable device
    and see if the item info tells what OS is expected to be present for it to work.
    Good luck & happy computing!

  • Ok so I got my mac mini today and I am trying to set it up but my wireless keyboard does not sync up. I have tried entering the code that the mini displays but still cannot get past the sync keyboard screen. Since I dont have a wired keyboard ...any ideas

    Happy Thanksgiving. Any ideas on how to sync up a brand new man mini with a wireless keyboard. My attempts at following the directions have been frustated so far. Entering the numerical code has not yet led to a successful sync up.

    Alright, very good.
    Have you tried a PRAM reset? OS X Mavericks: Reset your computer’s PRAM

  • TS3048 wireless keyboard does not work

    I just used my Apple wireless keyboard a few days ago.  Today I cannot get it working.  Caps lock does not even light up, so I canged batteries.  My MacMini cannot detect bluetooth of my keyboard, it seems.  Any suggestions?

    Hello:
    Try resetting the SMC.
    Barry

  • Wireless keyboard does not work

    both my wireless mouse and keyboard had stopped working. I rebooted and the mouse started working but the keyboard is still not working.

    Check to ensure that the batteries in the mouse and keyboard are not flat. It sounds as from your description that it may be the case with the keyboard or that you need to reconnect the keyboard to the wireless dongle.
    You have not specified whether your wireless keyboard and mouse are HP or aftermarket. It would help if you did that.
    How to identify your HP product
    ****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
    2015 Microsoft MVP - Windows Experience Consumer

  • Wireless keyboard stopped working caps lock light does not come on but on mac mini unable to log in

    Any help out there would be appreciated. Never had this problem before until now.. Mac mini was asleep. pressed space bar on keyboard.. machine woke up now i can't type anything. restarted the machine and now i can't log in. can only do it through my mbp with screen sharing.

    For troubleshooting and emergency booting where BT may not
    work, a wired USB keyboard is recommended, as spare/backup.
    A windows keyboard can be OK to use, if you don't have one
    and end up borrowing one from a neighbor, see link to compare.
    If you are familiar with windows or also use BootCamp, there
    is an article about keyboard use and mapping those k/b here:
    •BootCamp: About keyboards and key assignment for MS Windows
    http://support.apple.com/kb/ht5636
    I've almost always had at least one extra, new or spare keyboard.
    Good luck!

  • Wireless keyboard does not pair

    Hi,
    I paired successfully a keyboard to an iMac awhile ago and then I couldn't get it work for a reason I don't know and let it go.
    Now Ineed this wireless keyboard for another computer and I would like to try once again to make it work.
    Here's my problem :
    Ther keyboard is recognized by the bluetooth assistant (with my name by the way). Then I get the code to enter and then the pairing fails. And I know I have to press the enter key ! My batteries are ok (green light). I have tried on a friend(s computer, same thing and the keyboard is also recognized with my name on his machine. Is there a way to globally reset this keyboard and start from the beginning ?
    Any idea would be welcome !

    Hello p:
    Welcome to Apple discussions.
    Try trashing a preference file and restarting (com.apple.bluetooth.plist).
    I would also reset the PRAM:
    http://support.apple.com/kb/HT1379
    Barry

  • New Wireless Keyboard does not function Ctrl+Alt+Del in Windows 7 32 Bit

    As the subject, does anyone can help me ?

    HI, Michael;
    Crystal Reports 2008 is the only version that is tested / certified and supported on Windows 7.
    Another thing that I noticed from your post - Crystal Reports XI does not work with VS.NET 2008 - are you sure that is the version you are using? Which versions of our .NET assemblies do you have in your project?
    Best Regards,
    Jonathan

  • Wireless apple keyboard will not pair/connect to new mac mini

    So, I cannot complete setup and use the computer.  The keyboard IS discoverable by my macbook air.

    Same with my new mac mini.
    Got it brand new via the online shop.
    Happy to start with the new mac i really got dissapointed by the fact that it`s impossible to pair the wireless keyboard unless you first connect a USB keyboard to the mac mini and start the configuration.
    THIS ***** !!!
    No hint at all from apple that you first have to connect the USB keyboard.
    I had to borrowed a USB keyboard from my neighbour :-((
    After setting things up it was no problem at all to establish the BT connection with the keyboard.
    Works fine now.

Maybe you are looking for

  • Error icon when trying to boot up

    I was working on my black macbook when suddenly everything froze up, I gave it time to load but I eventually just restarted. Since then my computer starts with a grey screen then shows a file icon with a question mark in the center, it doesn't boot u

  • Flash 6 vs. Flash 7/8 AS1 difference?

    Is this behavior documented? It has left me utterly baffled. var a = "string"; if(!a)trace("!a:"+a); Working in the Flash 8 IDE, I get these results: Publish settings - Flash 6 AS1 Output - "!a:string" Publish settings - Flash 7 or 8 AS1 Output - ""

  • Message stucks in SM58

    Hi, i'm trying to send an ALEAUD from XI to IDES (R/3 4.6C). It stucks in SM58: "Screen output without connection to user", what is obvisiously a message from R/3. Do somebody know that error? Regards, Udo

  • Oracle exporting query

    Hi, I was wondering if there is a way in standard oracle 10g for exporting of query result to a file? This is the scenario, I have a script which have a simple query, eg, select * from tableA. I would like to be able to run a sql command to the datab

  • Issue in subcontracting

    hi, while doing migo for subcontracting finished goods,the error message is showing  version 0 is not defined for the year 2009.while doing  with transaction OKEV  and going details of version 0 it is showing that indicator should not be activated.bu