3 computers running fine on router, 1 not

I have 3 brand new computers hooked up and working on a linksys router, and another one of the same type, hooked up to it, but unable to connect. Even when hooked directly into the wall, or if I take a cable out of one of the working machines, it still cannot connect to the internet. I have checked out the ethernet card in the machine, and the computer says that it is working fine.
The router im using is a Wireless-G 2.4GHz router, but I have the 4 computers wired into it.
Does anyone have a clue as to why the computer cannot access the internet, and what I could do to fix the issue?
Message Edited by razor7 on 04-23-2008 06:56 AM

Try to use ping to troubleshoot network problem on that problematic computer. Also take a look on how to configure wireless router and wireless adapter here, so that can create a network without problem.. See whether it helps..

Similar Messages

  • A javaScript code that runs fine in IE but not in other plz help

    Hello friends,
    plese help me in getting the code for Opera and Mozilla browsers. The following code runs fine in IE but not in other browsers. it show titlebar in other browsers. What to do disable titlebar in other browsers? plz help
    <html>
    <head>
    <script>
    //Frameless Banner Popup
    // Set the url of the banner popup window page
    //var theURL = "index.htm";
    var theURL = "/cgi-bin/login";
    // Set the title of the popup window
    var title = "Login"
    // Set the size of the popup window
    var windowWidth = 350; // cannot be less than 100
    var windowHeight = 350; // cannot be less than 100
    //var windowWidth = window.screen.width; // cannot be less than 100
    //var windowHeight = window.screen.height; // cannot be less than 100
    // Set the position of the popup window
    var windowX = ((window.screen.width/2) - 175);
    var windowY = ((window.screen.height/2) - 175);
    // Set true to auto-center (positions will be ignored)
    var autocenter = false;
    // Set true for popup to close when launch page does
    var autoclose = false;
    var s="width="+windowWidth+",height="+windowHeight;
    var beIE=document.all?true:false;
    var done=new Object("no");
    if(autocenter){
    windowX = (window.screen.width-windowWidth)/2;
    windowY = (window.screen.height-windowHeight)/2;
    function doAgilePopup(){
    if (beIE){
    agilePopper = window.open("","popAgile","fullscreen,"+s);
    agilePopper.blur();
    window.focus();
    agilePopper.resizeTo(windowWidth,windowHeight);
    agilePopper.moveTo(windowX,windowY);
    var frameString=""+
    "<html>"+
    "<head>"+
    "<title>"+title+"</title>"+
    "</head>"+
    "<frameset rows='*,0' framespacing=0 border=0 frameborder=0>"+
    "<frame name='top' src='"+theURL+"' scrolling=no>"+
    "<frame name='bottom' src='about:blank' scrolling='no'>"+
    "</frameset>"+
    "</html>"
    agilePopper.document.open();
    agilePopper.document.write(frameString);
    agilePopper.document.close();
    }else{
    agilePopper=window.open(theURL,"popAgile","scrollbars=no,"+s);
    agilePopper.blur();
    window.focus();
    agilePopper.resizeTo(windowWidth,windowHeight);
    agilePopper.moveTo(windowX,windowY);
    agilePopper.blur();
    if (autoclose){
    window.onunload = function(){agilePopper.close();}
    done="okay";
    </script>
    </head>
    <BODY onLoad="doAgilePopup(),top.window.close()">
    </body>
    </html>

    missing semicolon in end of the variable frameString ,
    better write the string in single line thats easy to find the bugs like this.
    var frameString=""+
    "<html>"+
    "<head>"+
    "<title>"+title+"</title>"+
    "</head>"+
    "<frameset rows='*,0' framespacing=0 border=0 frameborder=0>"+
    "<frame name='top' src='"+theURL+"' scrolling=no>"+
    "<frame name='bottom' src='about:blank' scrolling='no'>"+
    "</frameset>"+
    "</html>"

  • I'll ask this again.  I'm running Yosemite, LR 4.4 everything was running fine and I'm not sure if this is connected but when I loaded the last security update from Apple I started getting the "no content" box when I tried to publish to LR (Facebook OK),

    I'll ask this again.  I'm running Yosemite, LR 4.4 everything was running fine and I'm not sure if this is connected but when I loaded the last security update from Apple I started getting the "no content" box when I tried to publish to Flickr (Facebook OK), now I can't get it to authorize, I loaded 3rd party JR plug in and still get can't authorize.  Can anybody help?  Basically LR is useless, it has been nothing but problems.

    It would probably be better to continue your previous thread on the same question than to start a new one.

  • EBS Forms functional script runs fine in OpenScript but not from OTM

    Hi,
    I have an EBS forms functional test script which runs fine in OpenScript, but when scheduled from OTM, the web part runs fine but when it comes to forms, the script fails with the following error:
    Forms Object Not Found! XPath: //forms:window[(@name='NAVIGATOR')], Type: oracle.oats.scripting.modules.formsFT.helper.test.FormWindow, Cause: No Matches <Less>
    I have performed all the steps below already:
    1) Stopping the OATS Agent service and changing it to manual.
    2) Starting the command prompt and running the AgentManagerService command as mentioned in your forum.
    3) The console displays
    C:\>C:\OracleATS\agentmanager\bin\AgentManagerService.exe -c AgentManagerService
    .conf
    wrapper  | --> Wrapper Started as Console
    wrapper  | Launching a JVM...
    jvm 1    | Wrapper (Version 3.0.3)
    jvm 1    |
    4) I have added the test in the OTM with the following command line settings:
    -browser.type InternetExplorer -formsft.startup_timeout 30 -formsft.action_timeout 20 -formsft.response_timeout 10 -delayPercentage -1 -delayMin 0 -delayMax 5 -FormsAutomationEnabler.bat -enableForms true
    But each time the script fails, please note that my script has assets and they are placed within the script folder.
    Please help me on this at earliest.
    Thanks,
    Aarti

    Hello Aarti!
    I had the same problem and this steps help to solve the problem:
    You need to enable Forms Automation under agent. Please follow by below steps.
    1.open command prompt
    2.cd C:\OracleATS\agent
    3.FormsAutomationEnabler.bat -enableForms true
    4. Run script from OTM
    Attila

  • Execute query  run fine with numeric data not give result on string data

    Hi master
    Sir I use under blow code for execute query
    sir when I use numeric data then run fine but when I use character data then not give any result
    with numeric run fine
    DECLARE
         DD VARCHAR2(15);
    BEGIN
         DD:=10;
    set_block_property('emp', default_where, 'where DEPTNO='||DD);
    go_block('emp');
    execute_query;
    set_block_property('emp', default_where, '');
    END;
    With character not give any result
    DECLARE
         DD VARCHAR2(15);
    BEGIN
         DD:='SALESMAN';
    set_block_property('emp', default_where, 'where RTRIM(EMPNO)='||DD);
    go_block('emp');
    execute_query;
    set_block_property('emp', default_where, '');
    END;
    Please give me any idea

    bro it is not working on string format coz of the missing quotes. e.g. 'smith' or smith. so the quoted string will be compared. in set_block_property u have to include extra quotes on the variable. e.g.
    set_block_property('emp',default_where,'where ename='''||:emp.ename||'');
    or with conditional statement
    set_block_property('emp',default_where,'where ename='''||:emp.ename||''' and dname='''||dept.deptno||'');
    there i included two extra qoutes before joining ename and in the an extra quote to complete to string. if u would like to debug at runtime to show if the qouted string condition is proper then assign the where clause to a variable and message it up.
    like
    myvariable:='where ename='''||:emp.ename||'';
    message(myvariable);
    message(myvariable);
    set_block_property('emp',default_where,myvariable);
    after the string is quoted properly the execute query will work fine, also use the function upper or lower to compare strings.
    zaibi.

  • Report running fine via se38 , but not with tcode.

    I had made a alv report, and had assinged TCODE.
    When running via tcode > in selection screen i had given all the input data in selection fields,>After that when clicking  the execution button> ITS GOING BACK TO SAP SCREEN.
    BUT.
    SAME report when running through SE38, its running fine..
    I had debugg the program , and what find that when running throug TCOde , After AT-SELECTION SCREEN EVENT , ITS COMING OUT TO SAP MENU WITHOUT TRIGGERING THE  START-OF-SELECTION EVENT.
    HELP ME...

    Please follow the steps for creating a transaction for report..
    GOTO SE93
    Give the transaction code.
    Press create button..
    Enter the short description..
    Choose the radio button which says "Program and selection screen(report transaction)".
    Press Enter..
    Give the program name..
    Remove the Selection screen "1000" if you want.
    Save the transaction code..

  • Can connect to wireless network run off dell router, but not internet!

    I have a iBookG4 and have moved to a new apt with a wireless network run off a dell router/ comcast. My roommates have both Macs and PCs and can connect with no problems. I found the network on my airport and put in the password, joined network no problem, but cannot connect to the internet. The Airport status is yellow and says that Airport has self assigned IP address and cannot connect to the internet. I can connect fine to other open networks in the area so its not my computer. I tried to copy the IP address from my roommate manually to the network settings but that didn't work either. What am I doing wrong? No one here seems to recall how they set up the network and I am paying for a network I can't access. Please help!!!

    Does the dell router have an access list set-up?
    With an access list (depending on the router) it can be set-up to allow access for only certain MAC addresses. If your MAC address isn't in the list, you'll not get on.
    Usually the router will have an IP address itself of 192.168.2.1 or 192.168.0.1 - depends on the router. You should be able to determine it from the IP address your computers are getting. Try getting someone to connect to this through a browser, and check/change the configuration of the router directly.
    MacBook Pro 15"   Mac OS X (10.4.9)   iBook G4 14", Airport Extreme, USB hub, SeaDisk 320 HDD, Epson R300, Epson RX620

  • Report running fine in foreground but not in background

    Dear Friends-
    I have created few varaients to run my report in background and foreground .
    and inside report am using OOPS ALV and call screen  .
    issue is  when i  run prog  using varaient in  foreground  it work fine and show me the correct one record
    but when i  run the report with same varaient in background  it  shows  me   huge records which are not relevant with given input also ...............How to solve this   pls guide me
    Regards
    Meeta

    Hi
    In my report  am passing the input via varaients  and submit another report inside the prog  and in that second report it call screen  with ALV  stuff.
    Is that is the reason ?
    user command  am not sure because at end of the job  it not give any error  job looks finish and  shows so many records.
    Regards
    Meeta

  • Report runs fine in Analyzer but not working when executed fromQuerydesig

    Hi,
    I have a issue with the Bw report which is not showing any data for Keyfigureswhen i execute the report related to APO from Bex query designer in Web.
    But the same report executes fine in the Bex Analyzer.
    If any one has faced this issue earlier,update us reg that.
    We are doubting any prob related to catch memory as the java link for the report is not working.Report works fine in RSRT.
    Vamsi

    Hi there,
    Can you please let us know what cache settings you changed, as we are having the same issue.
    Many thanks

  • Report runs fine in Analyzer but not working when executed fromQuerydesiger

    Hi,
    I have a issue with the Bw report which is not showing any data for Keyfigureswhen i execute the report related to APO from Bex query designer in Web.
    But the same report executes fine in the Bex Analyzer.
    If any one has faced this issue earlier,update us reg that.
    We are doubting any prob related to catch memory as the java link for the report is not working.Report works fine in RSRT.
    Vamsi

    Hi there,
    Can you please let us know what cache settings you changed, as we are having the same issue.
    Many thanks

  • 13" Mid 2012 MBP. Internal hdd not seen (again...) but runs fine from USB.

    I bought my MBP in December, 2012. It ran wonderfully for the first three months. With no real warning whatsoever, I got the ? Folder at startup. I did my research and tried the troubleshooting I found here and on other sites.
    What it boiled down to was that I could run the hdd externally via USB just fine, but it was not detected via the internal SATA connection. I tried swapping the hdd as well, but I didn't have any luck. So, I ran my brand new MBP via USB for about two months until I got back to the U.S. (working in Afghanistan) and took it to the local Apple Store.
    They checked it out, swapped the hdd, and told me it was fixed. It seemed like it for about three or four months, but I was still wary. Sure enough, the hdd failed again. This time I couldn't get it to work from the USB though, so I beleived the hdd actually failed this time. I swapped the hdd, hoping that it was that simple (back in Afghanistan, so the store wasn't an option). It ran fine for about two months this time.
    Now it is not detected internally again, but runs just fine via USB. I did try a different hdd that I had on hand, and that wasn't detected either. As you can imagine, I am not excited about running a year old MBP via USB. Unfortunately my initial year of coverage ran out last month.
    Does anyone have some suggestions on how I should go forward with this? I've heard great things about Apple support, but I won't be back to the U.S. for at least a month. Should I bother talking to the local Apple Store when I get back? Deal directly with a different support avenue? Am I out of luck and stuck financing my own repairs? What is the best course of action here?
    13" Mid-2012 MBP. 2.5 GHz i5. OSX 10.9.1

    Assuming there is nothing wrong with the HDD, then there may be a faulty ribbon cable connecting the drive to the motherboard. Try replacing it.
    I would also check that your RAM modules are well-seated with clean edge pins.
    Intel-based Macs: Resetting the System Management Controller (SMC)
    Resetting your Mac's PRAM and NVRAM

  • I have a php module which runs fine in Firefox and all other browsers but not Safari. It always run twice - I see a small ? in upper right corner which is causing it to run twice but NO idea why? Help - thank you

    I have a php module which runs fine in Firefox and all other browsers but not Safari. It always run twice - I see a small ? in upper right corner which is causing it to run twice but NO idea why? I read it MAY have something to do with am image it cannot load but I see them all loaded.  Help - thank you

    Could you share a link to the page?
    Seeing it in context and in our browsers is much easier to debug.
    If not, make sure to run the validator here The W3C Markup Validation Service and clear out any problems. HTML errors, especially structural ones, will cause all kinds of display problems in various browsers/versions/platforms.

  • I have a Mac running OS 10.5.8. I downloaded Firefox 4 and not the program will not open at all. I am also unable to download the previous version that was running fine. I'm using Safari to contact you.

    I have a Mac G5 running OS 10.5.8. I downloaded Firefox 4 and now the program will not open at all. I get an error message that reads --
    "You cannot open the application 'Firefox" because it is not supported on this architecture."
    I am also unable to find a link to download the previous version (3.6) that was running fine. (I'm using Safari to contact you.)

    Same proble here, although the Firefox system requirements says it is OK to have PowerPC G3 G4 or G5 ( I have G5 2GHZ)
    My solution; very simply use timemachine to restore the previous Frefox 3.x
    worked great in 3 mns

  • I run a Windows 8.1 -  Photoshop CS5 under Parallels on an iMac one year old and both having the latest OS. I use a NIK plugin "VIVEZA" which run fine for years without a problem. Latelt and without a reason, the NIK plugin has gone corrupt, (can not use

    @I run a Windows 8.1 -  Photoshop CS5 under Parallels on an iMac one year old and both having the latest OS. I use a NIK plugin "VIVEZA" which run fine for years without a problem. Latelt and without a reason, the NIK plugin has gone corrupt, (can not use it more the 2 corrections after a get a black background message that there is not enough memory) and the system stops running and a must restart is required. How do I fix this terrible problem?
    If it requires a Photoshop CS5 re-install, (I belief that it may fix the problem) and re-install the two third party plugins (NIK Viveza) and (Onone Perfect Resize) how and where do I get to the proper Adobe upload page to do that.
    I have tried to fix this problem by changing the memory allocations, I have spend many hours on it and are very disgusted with it but it needs to be fixed. The current memory settings are;
    Ram available = 1588 MB
    Range = 873 -1143 MB
    Recommended Photoshop usage range =  857  however I have tried every setting to max and in between. Nothing works. Current setting = 1588 (max)
    The Photoshop I use is registered, I have product # and order # .

    Contact NIK for updated/upgraded versions of their plug-ins.  They have been having a lot of issues with their plug-ins.

  • Memory leak? amd 64 bit using 1.4.2_03 program runs fine on other computers

    I have a program that runs fine on a red hat linux desktop and a pentium 1.6ghz xp pro laptop but on my amd 64 bit 3400+ xp pro desktop after ~20 seconds it slows to a crawl. i was originally using j2sdk1.4.2_04 but noticed this was not available for download anymore so i switched to j2sdk1.4.2_03 but have the same problem. my laptop is using j2sdk1.4.2_03. im not sure what the red hat linux machine is using. this is a starfield simulator and when it starts to slow all the stars turn gray and its like the drawLine is not working right either. anyone have any ideas? code is below
    import java.awt.*;
    import java.awt.event.WindowListener;
    import java.awt.event.WindowEvent;
    import java.util.*;
    import javax.swing.*;
    import java.io.*;
    class StarfieldWindowListener implements WindowListener
    public void windowActivated( WindowEvent e ) {}
    public void windowClosed( WindowEvent e ) {}
    public void windowClosing( WindowEvent e )
    System.exit(0);
    public void windowDeactivated( WindowEvent e ) {}
    public void windowDeiconified( WindowEvent e ) {}
    public void windowIconified( WindowEvent e ) {}
    public void windowOpened( WindowEvent e ) {}
    public class StarfieldSimulator
         public static void main (String args[])
              JFrame frame = new JFrame ("Starfield Simulator");
              frame.getContentPane ().setLayout (new BorderLayout ());
              if (args.length == 0) frame.getContentPane ().add (new Starfield (500));
              else frame.getContentPane ().add (new Starfield (Integer.parseInt (args[0])));
    frame.addWindowListener(new StarfieldWindowListener());
              frame.setSize (1024, 768);
              frame.show ();
    class Point3D
         public double x, y, z;
    public float r, g, b;
    public Color c;
         public Point3D (double x, double y, double z)
    Random random = new Random ();
              this.x = x;
              this.y = y;
              this.z = z;
    r = random.nextFloat();
    g = random.nextFloat();
    b = random.nextFloat();
    c = new Color( r, g, b );
    class Starfield extends JComponent
         protected boolean first;
         protected Point3D points[][];
         protected Random random;
         private int trail = 20;
    private double rot = .0005, co = Math.cos( rot ), si = Math.sin( rot );
         public Starfield (int numPoints)
    //RepaintManager repaintManager = RepaintManager.currentManager(this); repaintManager.setDoubleBufferingEnabled(false);
              first = true;
              random = new Random ();
              points = new Point3D[numPoints][trail];
              for( int y = 0; y < numPoints; ++y )
                   for( int x = 1; x < trail; ++x )
                        points[y][x] = new Point3D( 0, 0, 0 );
              for (int index = 0; index < numPoints; index++)
                   points[index][0] = new Point3D ((random.nextDouble () - 0.5) * 2.0, (random.nextDouble () - 0.5) * 2.0, (random.nextDouble () - 0.5) * 2.0);
         public void paint (Graphics g)
    //DebugGraphics g = new DebugGraphics(g1);
    int i;
              int halfWidth = getWidth () / 2;
              int halfHeight = getHeight () / 2;
              g.setColor (Color.black);
              g.fillRect (0, 0, getWidth (), getHeight ());
              int pointsLength = points.length;
              for (int index = 0; index < pointsLength; index++)
                   for( i = trail - 1; i >= 1; --i )
                        points[index] = points[index][i - 1];
    if( points[index][0].z <= 0.0 )
    while (points[index][0].z <= 0.0) points[index][0] = new Point3D ((random.nextDouble () - 0.5) * 2.0, (random.nextDouble () - 0.5) * 2.0, (random.nextDouble () - 0.5) * 2.0);
    points[index][0].r = random.nextFloat();
    points[index][0].g = random.nextFloat();
    points[index][0].b = random.nextFloat();
    for( i = 1; i < trail; ++i )
    points[index][i].x =points[index][i].y = points[index][i].z = 0;
    g.setColor (points[index][0].c);
                   for( i = 0; i < trail; ++i )
                        points[index][i].x = points[index][i].x * co - points[index][i].y * si;
                        points[index][i].y = points[index][i].y * co + points[index][i].x * si;
    int sx1, sy1, sx2, sy2;
    sx1 = (int) ((points[index][0].x * halfWidth) / ((points[index][0].z) * 10.0)) + halfWidth;
    sy1 = (int) ((points[index][0].y * halfHeight) / ((points[index][0].z) * 10.0)) + halfHeight;
    if( points[index][(trail - 1)].z == 0 )
    g.drawRect( sx1, sy1, 1, 1 );
    else
    sx2 = (int) ((points[index][(trail - 1)].x * halfWidth) / ((points[index][(trail - 1)].z + .0005 * (trail - 1)) * 10.0)) + halfWidth;
    sy2 = (int) ((points[index][(trail - 1)].y * halfHeight) / ((points[index][(trail - 1)].z + .0005 * (trail - 1)) * 10.0)) + halfHeight;
    g.drawLine( sx1, sy1, sx2, sy2 );
    points[index][0].r = (float) Math.min ( points[index][0].r + .00005, 1.0 );
    points[index][0].g = (float) Math.min ( points[index][0].g + .00005, 1.0 );
    points[index][0].b = (float) Math.min ( points[index][0].b + .00005, 1.0 );
    points[index][0].c = new Color( points[index][0].r, points[index][0].g, points[index][0].b );
                   points[index][0].z -= 0.0025;
    try {
    Thread.sleep(1);
    } catch (InterruptedException e) {
    e.printStackTrace(); //To change body of catch statement use File | Settings | File Templates.
    repaint();

    doesnt ANYONE have an answer?? please?Apparently not. If the answer involves us typing in your program, understanding it, debugging it, etc., hey, we all have jobs, too. We can answer specific questions ("How do I do <some specific task>?" or "I tried this and that <specific task> but ran into <specific problem>"). But we don't have all day to debug everyone's programs.
    * First of all, use the code formatting markup around your code (See the Formatting Help link).
    * Secondly, tell us what you have tried - have you looked at your Task Manager and recorded your program's size? Compare it on the machines where it runs well, and the one where it doesn't.

Maybe you are looking for