30 minutes retry

Hi,
I am facing a wierd issue in retry action in Error handling Framework.
I have a BPEL process which invokes an external web service.
I have defined the action in fault policy for this process as Retry with Retry Count - 3 and Retry Interval - 5.
When I make the web service down and run the BPEL process standalone, I am able to see the retry happen at invoke for 3 times with an interval of few seconds.
Now I created an esb and am invoking the BPEL from this ESB.
NOw if I teste the same above scenario, I am not able to get the bpel process instance for half an hour.
After half an hour when i see the instance of the BPEL process, I find thatafter the first retry, its taking 30 minutes and 5 seconds for the second retry to start.
The time interval between the second and third retry is again only few seconds.
I checked the ESB fault policy, the retry count there is '0'. I checked the esb_config.ini file and set the InboundRetryEnabled and OutbounfRetryEnabled to 'false'.
Still the same issue.
Please let me know if i missed out something or I need to check any other file.

Yes in the email
Alert: _026E0E71_A5B3_4781_8FBA_E29D7FC4225D_
Resolution state: Closed
Source: Queues - SOPEXCH4 (Hub Transport) - MCO
Path: SOPEXCH4.ad
Last modified by: System
Last modified time: 8/24/2014 1:21:08 PM
Alert description:
"http://OPMGRRMS1.ad/default.aspx?DisplayMode=Pivot&AlertID=%7bd33cc629-166b-435b-8385-d09143601cef%7d"
Notification subscription ID generating this message: {6938E96A-B072-7A58-931E-E8C82A37BFD6}
but also on the SCOM Console?
System Center Operations Manager 2007 / System Center Configuration Manager 2007 R2 / Forefront Client Security / Forefront Identity Manager

Similar Messages

  • Drive with Offline Files folder not available for 2 minutes after being connected to the network.

    Hi
    We use Windows SP1 with one folder from the User HomeDirectory set to be available offline.
    The problem we encounter is that when going from Offline to Online via VPN, there is a 2 minutes delay for the drive where the offline folder is located to be available again. Other drives mapped at VPN connection time are available immediately
    after we applied KB2705233. Only the drive that contains the folder that we make available offline has this delay issue.
    I found out KB2663418 but it does not apply as we have Windows 7 SP1. However the symptoms are the same:
    < This issue occurs because the client-side caching (CSC) interface tries to reconnect to the source before the network is actually available. This behavior causes the SMB cache to enter a negative state. In this situation, the CSC interface tries to
    reconnect to the source on the next 2-minute retry interval.>
    Does one know how to force a check of the connectivity or if there is another fix available ?
    thanks in advance
    bruno

    Hi,
    Why KB2663418 didn't applied to your computer? It applied to
    Windows 7 Service Pack 1, when used with:
    Windows 7 Enterprise
    Windows 7 Professional
    Windows 7 Ultimate
    Did you use Windows 7 Home Basic or Home Premium?  However, Windows 7 Home Basic and Premium does not support Offline Files.
    Thus please try that hotfix.
    Karen Hu
    TechNet Community Support

  • DSC Extension install failure

    Hello,
    I am seeing this DSC install failure in the log when I call the Set-AzureVMDscExtension during a create vm call. This issue is not occurring all the time, seems to be intermittent. Digging some more I found the WMF 5 install is happening before the DSC extension
    and looks like there is a 5 minute retry for the WMF install to complete. If the install takes more than 5 minutes the code flow does not write the install-completed.dsc file to the DSCWork folder.
    In order to test this hypothesis, I ran the install.cmd and enable.cmd manually after the saw this install failure, and at that point I see the install-rebootneeded.dsc file being generated in the DSCWork folder and the machine is restarted and the DSC execution
    continues after the machine reboot and everything works as expected. If I am right with my hypothesis on the problem, how can I increase the retry limit for the WMF install to more than 5 minutes? I saw another thread which attributes the same failure to securing
    PSCredentials object when calling the DSC install. At this point, I would like to know how other people in the forum got past this issue, This is really blocking my install workflow right now. Appreciate any inputs!
    Execution Error:
    C:\Packages\Plugins\Microsoft.Powershell.DSC\1.5.0.0\bin\enable.ps1 : Error enabling the DSC Extension: The DSC Extension was
    not installed correctly, please check the logs on the VM.
    At C:\Packages\Plugins\Microsoft.Powershell.DSC\1.5.0.0\bin\pre-enable.ps1:51 char:5
    +     & $scriptRoot\enable.ps1 -Verbose
    +     ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
        + CategoryInfo          : NotSpecified: (:) [Write-Error], WriteErrorException
        + FullyQualifiedErrorId : Microsoft.PowerShell.Commands.WriteErrorException,enable.ps1

    Hi,
    Thanks for your question. Based on my experience, there is no direct way to change the retry time limitation for installing WMF. Maybe some scripts would achieve that.
    Besides, can you install DSC in Azure preview portal instead of running Azure PowerShell cmdlets?  You can upload and install the script in Azure Preview portal for the VM to see if the issue persists. More information, you can refer to the link below:
    Manage the PowerShell DSC Extension in the Azure Preview Portal
    Best regards,
    Susie
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

  • Email Triggering  Problem

    I got a scenario where i need to place all the input payloads in the jms queue and route to the endpoint uri, if the endpoint is down/unavailable i need to rollback and place the payloads back into the queue and need to route it until the service is up/available with time gap of 15mins. Meanwhile i need to notify with others through mail whenever the service is down. I configure the mail triggering part in the route error handler, The problem i facing was whenever the service is down hundreds of mail is being triggered out until the payload is in the jms queue.
    1. I configured the retry interval as 15 mins and retry count as 1 in the endpoint business service.
    The expected scenario is what i need only 1mail to be triggered with the interval of 15mins irrespective of number of messages in the queue, instead i am getting hundreds of mail triggers.
    Please help me in this case.

    I wonder if using "Offline Endpoint URIs " option with 15 minutes retry time can help you
    Otherwise just send an email as part of an alert notification if any error occurred in the last 15 minutes - problem is you might have to wait 15 minutes to get the email notifying the accident.
    Otherwise set the alert with the "Alert Frequency - Notify Once" option - you should play a while with the options until you get it right :o)

  • Every ten minutes a popup on my 4s appears saying "unable to download" with the option of "done" or "retry". I can't get rid of it and I can't find out what it's trying to do!

    Every ten minutes a popup on my 4s appears saying "unable to download" with the option of "done" or "retry". I can't get rid of it and I can't find out what it's trying to do! theres noting pending on the App Store or iTunes. Nothing failed. I've reset my settings. Logged out and back into itunes. It's really annoying as rinsing my data!

    After talking to Apple for 3 hours I figured it out myself.
    Tre here was a singular failed song on iTunes on the computer that was trying to download and messing everything up. Maybe if you use iTunes on the computer and have a little mooch you'll find the same thing. I think it was hidden in the purchased part of it

  • BPEL process on error retrying self after every 5 minutes (no fault policy)

    Hi All
    We are facing very strange issue in one of our BPEL processes (we are using Oracle SOA Suite 11.1.1.3 on linux with 2 soa servers in cluster). The composite consists of a web service binding followed by a mediator which routes to three different BPEL processes (operational routing). This is all one way.
    Inside the BPEL we are throwing a bpel rollback fault in the catch all to roll back any pending database changes. As soon as the error comes, In the composite diagram i can see multiple BPEL instances under the mediator and they keep on coming after every 5 minutes (basically i see two BPEL instances with a gap of one second and this pair keeps on repeating every 5 minutes)
    Also we have a send email in the catch all and the email we get has a different composite id in every mail. However in the em i can see only one composite id (the first one when the error came) with multiple BPEL diagrams in it.
    We are not sure what is causing the error?
    1) Is it the one way mediator routing to 3 BPEL processes as per the operation invoked?
    2) Is there something wrong with clustering?
    3) Is there a problem with version 11.1.1.3?
    Please help as we are struck and not able to move to INT.
    Thanks and Regards
    Amit Sachdev

    Hi Anuj
    Thanks for the reply again. Using the below property seems to work, but it is making the call sync (i get an empty fault in SOAP-UI) and my java client also waits for the response.
    <component name="abcd">
    <implementation.bpel src="abcd.bpel"/>
    <property name="bpel.config.oneWayDeliveryPolicy" many="false" type="xs:string">sync</property>
    <property name="bpel.config.transaction" many="false" type="xs:string">required</property>
    </component>
    As i told that this is a long running process (could easily take 3-4 hours), i cant afford to wait for this (should be fire and forget).
    1) Is there a way, i can make it fire and forget and also stop the recovery using the properties you just told?
    2) If there is no way out, i can remove the throw rollback fault in catch all, but i want the composite instance to be shown as red (i will take care of the rollbacks in db in code). I tried using the terminate activity but that doesn't make it red (like it used to be in 10g). Is there a way to mark the instance as red without throwing an uncaught fault?
    Please let me know. Thanks
    Also regarding the patch, if we apply it, will it still recover the BPEL instance? I mean the BPEL is throwing a rollback fault and is being exactly retried 50 times with a gap of 5 minutes (default settings in em console, not touched at all). Every time it runs it would throw the same fault again (as it reads and deletes a control file, so in successive runs that control file will not be there) leading to rollback error being thrown from catch all during automatic retry.

  • When downloading movies, after several minutes an error message appears with "download error, tap to retry".  Continues to do this.  Any help?

    When downloading a movie on my IPad an error message occurs after recording for several minutes that says "Downloading error - please tap to retry".  The IPand also kicks out of Facebook after several minutes back to the screen meun.  Any advice on how to correct this?  Thank you.

    Hi MartinVernon,
    If you are having issues with iTunes after an attempted update, you may find the following article helpful:
    iTunes 11.1.4 for Windows: Unable to install or open
    http://support.apple.com/kb/TS5376
    Regards,
    - Brenden

  • How come my iMessages aren't sending anymore I have a iPod touch 5th gen. It was working and then like 5 minutes later it would not send any messages it always said not delivered even when I press retry and it doesn't send at all I even updated my iOS.

    How come my iMessages aren't sending anymore I have a iPod touch 5th gen. It was working and then like 5 minutes later it would not send any messages it always said not delivered even when I press retry and it doesn't send at all I even updated my iOS to iOS 7.04 to see if it will send my iMessages but it won't. I tried to send a message to anyone but it won't work even when before I would be able to send messages but something weird happened that made my messages not delivered. Is there any way I change fix it?

    iOS: Troubleshooting Messages

  • Dispatcher dies after 1 minute

    Hi,
    I am on ERP2005 SR2, with Windows 2003 and MSSQL 2005 DB.
    I have recently performed a database restore of the SAP database, but I am not able to restart SAP after this.
    The dispatcher dies after about 1 minute. You will find the dev_disp and dev_w0 files below:
    dev_disp file:
    trc file: "dev_disp", trc level: 1, release: "700"
    sysno      00
    sid        T01
    systemid   562 (PC with Windows NT)
    relno      7000
    patchlevel 0
    patchno    83
    intno      20050900
    make:      multithreaded, ASCII, 64 bit, optimized
    pid        4204
    Thu Feb 08 09:02:37 2007
    kernel runs with dp version 218(ext=109) (@(#) DPLIB-INT-VERSION-218)
    length of sys_adm_ext is 360 bytes
    SWITCH TRC-HIDE on ***
    ***LOG Q00=> DpSapEnvInit, DPStart (00 4204) [dpxxdisp.c   1239]
         shared lib "dw_xml.dll" version 83 successfully loaded
         shared lib "dw_xtc.dll" version 83 successfully loaded
         shared lib "dw_stl.dll" version 83 successfully loaded
         shared lib "dw_gui.dll" version 83 successfully loaded
         shared lib "dw_mdm.dll" version 83 successfully loaded
    rdisp/softcancel_sequence :  -> 0,5,-1
    use internal message server connection to port 3900
    Thu Feb 08 09:02:41 2007
    WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 4 seconds
    ***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c  5277]
    MtxInit: 30000 0 0
    DpSysAdmExtInit: ABAP is active
    DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
    DpIPCInit2: start server >sapr3s_T01_00                           <
    DpShMCreate: sizeof(wp_adm)          11648     (896)
    DpShMCreate: sizeof(tm_adm)          4663200     (23200)
    DpShMCreate: sizeof(wp_ca_adm)          18000     (60)
    DpShMCreate: sizeof(appc_ca_adm)     6000     (60)
    DpCommTableSize: max/headSize/ftSize/tableSize=500/16/552048/552064
    DpShMCreate: sizeof(comm_adm)          552064     (1088)
    DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
    DpShMCreate: sizeof(file_adm)          0     (72)
    DpShMCreate: sizeof(vmc_adm)          0     (1496)
    DpShMCreate: sizeof(wall_adm)          (25648/36736/64/104)
    DpShMCreate: sizeof(gw_adm)     48
    DpShMCreate: SHM_DP_ADM_KEY          (addr: 000000000BDA0050, size: 5320400)
    DpShMCreate: allocated sys_adm at 000000000BDA0050
    DpShMCreate: allocated wp_adm at 000000000BDA1AB0
    DpShMCreate: allocated tm_adm_list at 000000000BDA4830
    DpShMCreate: allocated tm_adm at 000000000BDA4890
    DpShMCreate: allocated wp_ca_adm at 000000000C217030
    DpShMCreate: allocated appc_ca_adm at 000000000C21B680
    DpShMCreate: allocated comm_adm at 000000000C21CDF0
    DpShMCreate: system runs without file table
    DpShMCreate: allocated vmc_adm_list at 000000000C2A3A70
    DpShMCreate: allocated gw_adm at 000000000C2A3AF0
    DpShMCreate: system runs without vmc_adm
    DpShMCreate: allocated ca_info at 000000000C2A3B20
    DpShMCreate: allocated wall_adm at 000000000C2A3B30
    MBUF state OFF
    DpCommInitTable: init table for 500 entries
    EmInit: MmSetImplementation( 2 ).
    MM global diagnostic options set: 0
    <ES> client 0 initializing ....
    <ES> InitFreeList
    <ES> block size is 4096 kByte.
    Using implementation flat
    <EsNT> Memory Reset disabled as NT default
    <ES> 127 blocks reserved for free list.
    ES initialized.
    Thu Feb 08 09:02:42 2007
    rdisp/http_min_wait_dia_wp : 1 -> 1
    ***LOG Q0K=> DpMsAttach, mscon ( sapr3s) [dpxxdisp.c   11644]
    DpStartStopMsg: send start message (myname is >sapr3s_T01_00                           <)
    DpStartStopMsg: start msg sent
    CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
    CCMS: Initalizing shared memory of size 40000000 for monitoring segment.
    CCMS: start to initalize 3.X shared alert area (first segment).
    DpMsgAdmin: Set release to 7000, patchlevel 0
    MBUF state PREPARED
    MBUF component UP
    DpMBufHwIdSet: set Hardware-ID
    ***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c   1050]
    DpMsgAdmin: Set patchno for this platform to 83
    Release check o.K.
    Thu Feb 08 09:03:22 2007
    ERROR => W0 (pid 4732) died [dpxxdisp.c   14299]
    ERROR => W1 (pid 2544) died [dpxxdisp.c   14299]
    ERROR => W2 (pid 412) died [dpxxdisp.c   14299]
    ERROR => W3 (pid 4944) died [dpxxdisp.c   14299]
    ERROR => W4 (pid 2760) died [dpxxdisp.c   14299]
    ERROR => W5 (pid 1004) died [dpxxdisp.c   14299]
    my types changed after wp death/restart 0xbf --> 0xbe
    ERROR => W6 (pid 4104) died [dpxxdisp.c   14299]
    my types changed after wp death/restart 0xbe --> 0xbc
    ERROR => W7 (pid 2208) died [dpxxdisp.c   14299]
    my types changed after wp death/restart 0xbc --> 0xb8
    ERROR => W8 (pid 3300) died [dpxxdisp.c   14299]
    ERROR => W9 (pid 3312) died [dpxxdisp.c   14299]
    ERROR => W10 (pid 4412) died [dpxxdisp.c   14299]
    my types changed after wp death/restart 0xb8 --> 0xb0
    ERROR => W11 (pid 4112) died [dpxxdisp.c   14299]
    my types changed after wp death/restart 0xb0 --> 0xa0
    ERROR => W12 (pid 4336) died [dpxxdisp.c   14299]
    my types changed after wp death/restart 0xa0 --> 0x80
    DP_FATAL_ERROR => DpWPCheck: no more work processes
    DISPATCHER EMERGENCY SHUTDOWN ***
    increase tracelevel of WPs
    NiWait: sleep (10000ms) ...
    NiISelect: timeout 10000ms
    NiISelect: maximum fd=553
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Thu Feb 08 09:03:32 2007
    NiISelect: TIMEOUT occured (10000ms)
    dump system status
    Workprocess Table (long)               Thu Feb 08 08:03:32 2007
    ========================
    No Ty. Pid      Status  Cause Start Err Sem CPU    Time  Program  Cl  User         Action                    Table
    0 DIA     4732 Ended         no      1   0             0                                                             
    1 DIA     2544 Ended         no      1   0             0                                                             
    2 DIA      412 Ended         no      1   0             0                                                             
    3 DIA     4944 Ended         no      1   0             0                                                             
    4 DIA     2760 Ended         no      1   0             0                                                             
    5 DIA     1004 Ended         no      1   0             0                                                             
    6 UPD     4104 Ended         no      1   0             0                                                             
    7 ENQ     2208 Ended         no      1   0             0                                                             
    8 BTC     3300 Ended         no      1   0             0                                                             
    9 BTC     3312 Ended         no      1   0             0                                                             
    10 BTC     4412 Ended         no      1   0             0                                                             
    11 SPO     4112 Ended         no      1   0             0                                                             
    12 UP2     4336 Ended         no      1   0             0                                                             
    Dispatcher Queue Statistics               Thu Feb 08 08:03:32 2007
    ===========================
    --------++++--
    +
    Typ
    now
    high
    max
    writes
    reads
    --------++++--
    +
    NOWP
    0
    2
    2000
    5
    5
    --------++++--
    +
    DIA
    5
    5
    2000
    5
    0
    --------++++--
    +
    UPD
    0
    0
    2000
    0
    0
    --------++++--
    +
    ENQ
    0
    0
    2000
    0
    0
    --------++++--
    +
    BTC
    0
    0
    2000
    0
    0
    --------++++--
    +
    SPO
    0
    0
    2000
    0
    0
    --------++++--
    +
    UP2
    0
    0
    2000
    0
    0
    --------++++--
    +
    max_rq_id          12
    wake_evt_udp_now     0
    wake events           total     8,  udp     6 ( 75%),  shm     2 ( 25%)
    since last update     total     8,  udp     6 ( 75%),  shm     2 ( 25%)
    Dump of tm_adm structure:               Thu Feb 08 08:03:32 2007
    =========================
    Term    uid  man user    term   lastop  mod wp  ta   a/i (modes)
    Workprocess Comm. Area Blocks               Thu Feb 08 08:03:32 2007
    =============================
    Slots: 300, Used: 1, Max: 0
    --------++--
    +
    id
    owner
    pid
    eyecatcher
    --------++--
    +
    0
    DISPATCHER
    -1
    WPCAAD000
    NiWait: sleep (5000ms) ...
    NiISelect: timeout 5000ms
    NiISelect: maximum fd=553
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Thu Feb 08 09:03:37 2007
    NiISelect: TIMEOUT occured (5000ms)
    DpHalt: shutdown server >sapr3s_T01_00                           < (normal)
    DpJ2eeDisableRestart
    DpModState: buffer in state MBUF_PREPARED
    NiBufSend starting
    NiIWrite: hdl 2 sent data (wrt=110,pac=1,MESG_IO)
    MsINiWrite: sent 110 bytes
    MsIModState: change state to SHUTDOWN
    DpModState: change server state from STARTING to SHUTDOWN
    Switch off Shared memory profiling
    ShmProtect( 57, 3 )
    ShmProtect(SHM_PROFILE, SHM_PROT_RW
    ShmProtect( 57, 1 )
    ShmProtect(SHM_PROFILE, SHM_PROT_RD
    DpWakeUpWps: wake up all wp's
    Stop work processes
    Stop gateway
    killing process (2584) (SOFT_KILL)
    Stop icman
    killing process (4720) (SOFT_KILL)
    Terminate gui connections
    wait for end of work processes
    wait for end of gateway
    [DpProcDied] Process lives  (PID:2584  HANDLE:516)
    waiting for termination of gateway ...
    NiWait: sleep (1000ms) ...
    NiISelect: timeout 1000ms
    NiISelect: maximum fd=553
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Thu Feb 08 09:03:38 2007
    NiISelect: TIMEOUT occured (1000ms)
    [DpProcDied] Process died  (PID:2584  HANDLE:516)
    wait for end of icman
    [DpProcDied] Process lives  (PID:4720  HANDLE:528)
    waiting for termination of icman ...
    NiWait: sleep (1000ms) ...
    NiISelect: timeout 1000ms
    NiISelect: maximum fd=553
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Thu Feb 08 09:03:39 2007
    NiISelect: TIMEOUT occured (1000ms)
    [DpProcDied] Process lives  (PID:4720  HANDLE:528)
    waiting for termination of icman ...
    NiWait: sleep (1000ms) ...
    NiISelect: timeout 1000ms
    NiISelect: maximum fd=553
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Thu Feb 08 09:03:40 2007
    NiISelect: TIMEOUT occured (1000ms)
    [DpProcDied] Process lives  (PID:4720  HANDLE:528)
    waiting for termination of icman ...
    NiWait: sleep (1000ms) ...
    NiISelect: timeout 1000ms
    NiISelect: maximum fd=553
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Thu Feb 08 09:03:41 2007
    NiISelect: TIMEOUT occured (1000ms)
    [DpProcDied] Process lives  (PID:4720  HANDLE:528)
    waiting for termination of icman ...
    NiWait: sleep (1000ms) ...
    NiISelect: timeout 1000ms
    NiISelect: maximum fd=553
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Thu Feb 08 09:03:42 2007
    NiISelect: TIMEOUT occured (1000ms)
    [DpProcDied] Process lives  (PID:4720  HANDLE:528)
    waiting for termination of icman ...
    NiWait: sleep (1000ms) ...
    NiISelect: timeout 1000ms
    NiISelect: maximum fd=553
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Thu Feb 08 09:03:43 2007
    NiISelect: TIMEOUT occured (1000ms)
    [DpProcDied] Process lives  (PID:4720  HANDLE:528)
    waiting for termination of icman ...
    NiWait: sleep (1000ms) ...
    NiISelect: timeout 1000ms
    NiISelect: maximum fd=553
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Thu Feb 08 09:03:44 2007
    NiISelect: TIMEOUT occured (1000ms)
    [DpProcDied] Process lives  (PID:4720  HANDLE:528)
    waiting for termination of icman ...
    NiWait: sleep (1000ms) ...
    NiISelect: timeout 1000ms
    NiISelect: maximum fd=553
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Thu Feb 08 09:03:45 2007
    NiISelect: TIMEOUT occured (1000ms)
    [DpProcDied] Process lives  (PID:4720  HANDLE:528)
    waiting for termination of icman ...
    NiWait: sleep (1000ms) ...
    NiISelect: timeout 1000ms
    NiISelect: maximum fd=553
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Thu Feb 08 09:03:46 2007
    NiISelect: TIMEOUT occured (1000ms)
    [DpProcDied] Process lives  (PID:4720  HANDLE:528)
    waiting for termination of icman ...
    NiWait: sleep (1000ms) ...
    NiISelect: timeout 1000ms
    NiISelect: maximum fd=553
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Thu Feb 08 09:03:47 2007
    NiISelect: TIMEOUT occured (1000ms)
    [DpProcDied] Process lives  (PID:4720  HANDLE:528)
    waiting for termination of icman ...
    NiWait: sleep (1000ms) ...
    NiISelect: timeout 1000ms
    NiISelect: maximum fd=553
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Thu Feb 08 09:03:48 2007
    NiISelect: TIMEOUT occured (1000ms)
    [DpProcDied] Process lives  (PID:4720  HANDLE:528)
    waiting for termination of icman ...
    NiWait: sleep (1000ms) ...
    NiISelect: timeout 1000ms
    NiISelect: maximum fd=553
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Thu Feb 08 09:03:49 2007
    NiISelect: TIMEOUT occured (1000ms)
    [DpProcDied] Process died  (PID:4720  HANDLE:528)
    DpStartStopMsg: send stop message (myname is >sapr3s_T01_00                           <)
    NiIMyHostName: hostname = 'sapr3s'
    AdGetSelfIdentRecord: >                                                                           <
    AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
    AdCvtRecToExt: opcode 4 (AD_STARTSTOP), ser 0, ex 0, errno 0
    DpConvertRequest: net size = 189 bytes
    NiBufSend starting
    NiIWrite: hdl 2 sent data (wrt=562,pac=1,MESG_IO)
    MsINiWrite: sent 562 bytes
    send msg (len 110+452) to name                    -, type 4, key -
    DpStartStopMsg: stop msg sent
    NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
    NiBufIIn: NIBUF len=274
    NiBufIIn: packet complete for hdl 2
    NiBufReceive starting
    MsINiRead: received 274 bytes
    MSG received, len 110+164, flag 1, from MSG_SERVER          , typ 0, key -
    DpHalt: received 164 bytes from message server
    NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
    NiBufIIn: NIBUF len=274
    NiBufIIn: packet complete for hdl 2
    NiBufReceive starting
    MsINiRead: received 274 bytes
    MSG received, len 110+164, flag 1, from MSG_SERVER          , typ 0, key -
    DpHalt: received 164 bytes from message server
    NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
    NiBufIIn: NIBUF len=274
    NiBufIIn: packet complete for hdl 2
    NiBufReceive starting
    MsINiRead: received 274 bytes
    MSG received, len 110+164, flag 1, from MSG_SERVER          , typ 0, key -
    DpHalt: received 164 bytes from message server
    NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
    NiBufIIn: NIBUF len=274
    NiBufIIn: packet complete for hdl 2
    NiBufReceive starting
    MsINiRead: received 274 bytes
    MSG received, len 110+164, flag 1, from MSG_SERVER          , typ 0, key -
    DpHalt: received 164 bytes from message server
    NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
    NiBufIIn: NIBUF len=274
    NiBufIIn: packet complete for hdl 2
    NiBufReceive starting
    MsINiRead: received 274 bytes
    MSG received, len 110+164, flag 1, from MSG_SERVER          , typ 0, key -
    DpHalt: received 164 bytes from message server
    NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
    NiBufIIn: NIBUF len=274
    NiBufIIn: packet complete for hdl 2
    NiBufReceive starting
    MsINiRead: received 274 bytes
    MSG received, len 110+164, flag 1, from MSG_SERVER          , typ 0, key -
    DpHalt: received 164 bytes from message server
    NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
    NiBufIIn: NIBUF len=274
    NiBufIIn: packet complete for hdl 2
    NiBufReceive starting
    MsINiRead: received 274 bytes
    MSG received, len 110+164, flag 1, from MSG_SERVER          , typ 0, key -
    DpHalt: received 164 bytes from message server
    NiIRead: hdl 2 recv would block (errno=EAGAIN)
    NiIRead: read for hdl 2 timed out (0ms)
    DpHalt: no more messages from the message server
    DpHalt: send keepalive to synchronize with the message server
    NiBufSend starting
    NiIWrite: hdl 2 sent data (wrt=114,pac=1,MESG_IO)
    MsINiWrite: sent 114 bytes
    send msg (len 110+4) to name           MSG_SERVER, type 0, key -
    MsSndName: MS_NOOP ok
    Send 4 bytes to MSG_SERVER
    NiIRead: hdl 2 recv would block (errno=EAGAIN)
    NiIPeek: peek successful for hdl 2 (r)
    NiIRead: hdl 2 received data (rcd=114,pac=1,MESG_IO)
    NiBufIIn: NIBUF len=114
    NiBufIIn: packet complete for hdl 2
    NiBufReceive starting
    MsINiRead: received 114 bytes
    MSG received, len 110+4, flag 3, from MSG_SERVER          , typ 0, key -
    Received 4 bytes from MSG_SERVER                             
    Received opcode MS_NOOP from msg_server, reply MSOP_OK
    MsOpReceive: ok
    MsSendKeepalive : keepalive sent to message server
    NiIRead: hdl 2 recv would block (errno=EAGAIN)
    Thu Feb 08 09:03:50 2007
    NiIPeek: peek for hdl 2 timed out (r; 1000ms)
    NiIRead: read for hdl 2 timed out (1000ms)
    DpHalt: no more messages from the message server
    DpHalt: sync with message server o.k.
    detach from message server
    ***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c   11957]
    NiBufSend starting
    NiIWrite: hdl 2 sent data (wrt=110,pac=1,MESG_IO)
    MsINiWrite: sent 110 bytes
    MsIDetach: send logout to msg_server
    MsIDetach: call exit function
    DpMsShutdownHook called
    NiBufISelUpdate: new MODE -- (r-) for hdl 2 in set0
    SiSelNSet: set events of sock 452 to: ---
    NiBufISelRemove: remove hdl 2 from set0
    SiSelNRemove: removed sock 452 (pos=2)
    SiSelNRemove: removed sock 452
    NiSelIRemove: removed hdl 2
    MBUF state OFF
    AdGetSelfIdentRecord: >                                                                           <
    AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
    AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
    AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
    blks_in_queue/wp_ca_blk_no/wp_max_no = 1/300/13
    LOCK WP ca_blk 1
    make DISP owner of wp_ca_blk 1
    DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 15)
    MBUF component DOWN
    NiICloseHandle: shutdown and close hdl 2 / sock 452
    NiBufIClose: clear extension for hdl 2
    MsIDetach: detach MS-system
    cleanup EM
    EsCleanup ....
    EmCleanup() -> 0
    Es2Cleanup: Cleanup ES2
    ***LOG Q05=> DpHalt, DPStop ( 4204) [dpxxdisp.c   10317]
    Good Bye .....
    DEV_W0 file:
    trc file: "dev_w0", trc level: 1, release: "700"
    ACTIVE TRACE LEVEL           1
    ACTIVE TRACE COMPONENTS      all, MJ
    B 
    B Thu Feb 08 09:02:42 2007
    B  create_con (con_name=R/3)
    B  Loading DB library 'F:\usr\sap\T01\DVEBMGS00\exe\dbmssslib.dll' ...
    B  Library 'F:\usr\sap\T01\DVEBMGS00\exe\dbmssslib.dll' loaded
    B  Version of 'F:\usr\sap\T01\DVEBMGS00\exe\dbmssslib.dll' is "700.08", patchlevel (0.81)
    B  New connection 0 created
    M sysno      00
    M sid        T01
    M systemid   562 (PC with Windows NT)
    M relno      7000
    M patchlevel 0
    M patchno    83
    M intno      20050900
    M make:      multithreaded, ASCII, 64 bit, optimized
    M pid        4732
    M
    M  kernel runs with dp version 218(ext=109) (@(#) DPLIB-INT-VERSION-218)
    M  length of sys_adm_ext is 360 bytes
    M  ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 4732) [dpxxdisp.c   1301]
    I  MtxInit: 30000 0 0
    M  DpSysAdmExtCreate: ABAP is active
    M  DpSysAdmExtCreate: VMC (JAVA VM in WP) is not active
    M  DpShMCreate: sizeof(wp_adm)          11648     (896)
    M  DpShMCreate: sizeof(tm_adm)          4663200     (23200)
    M  DpShMCreate: sizeof(wp_ca_adm)          18000     (60)
    M  DpShMCreate: sizeof(appc_ca_adm)     6000     (60)
    M  DpCommTableSize: max/headSize/ftSize/tableSize=500/16/552048/552064
    M  DpShMCreate: sizeof(comm_adm)          552064     (1088)
    M  DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
    M  DpShMCreate: sizeof(file_adm)          0     (72)
    M  DpShMCreate: sizeof(vmc_adm)          0     (1496)
    M  DpShMCreate: sizeof(wall_adm)          (25648/36736/64/104)
    M  DpShMCreate: sizeof(gw_adm)     48
    M  DpShMCreate: SHM_DP_ADM_KEY          (addr: 000000000DDA0050, size: 5320400)
    M  DpShMCreate: allocated sys_adm at 000000000DDA0050
    M  DpShMCreate: allocated wp_adm at 000000000DDA1AB0
    M  DpShMCreate: allocated tm_adm_list at 000000000DDA4830
    M  DpShMCreate: allocated tm_adm at 000000000DDA4890
    M  DpShMCreate: allocated wp_ca_adm at 000000000E217030
    M  DpShMCreate: allocated appc_ca_adm at 000000000E21B680
    M  DpShMCreate: allocated comm_adm at 000000000E21CDF0
    M  DpShMCreate: system runs without file table
    M  DpShMCreate: allocated vmc_adm_list at 000000000E2A3A70
    M  DpShMCreate: allocated gw_adm at 000000000E2A3AF0
    M  DpShMCreate: system runs without vmc_adm
    M  DpShMCreate: allocated ca_info at 000000000E2A3B20
    M  DpShMCreate: allocated wall_adm at 000000000E2A3B30
    X  EmInit: MmSetImplementation( 2 ).
    X  MM global diagnostic options set: 0
    X  <ES> client 0 initializing ....
    X  Using implementation flat
    M  <EsNT> Memory Reset disabled as NT default
    X  ES initialized.
    M 
    M Thu Feb 08 09:02:43 2007
    M  ThInit: running on host sapr3s
    M 
    M Thu Feb 08 09:02:44 2007
    M  calling db_connect ...
    C  Thread ID:2008
    C  Thank You for using the SLOLEDB-interface
    C  Using dynamic link library 'F:\usr\sap\T01\DVEBMGS00\exe\dbmssslib.dll'
    C  dbmssslib.dll patch info
    C    patchlevel   0
    C    patchno      81
    C    patchcomment Connection check on (0,0) (988711)
    C  np:(local) connection used on SAPR3S
    C  CopyLocalParameters: dbuser is 't01'
    C  Using Provider SQLNCLI
    C  OpenOledbConnection: MARS property was set successfully.
    C  ExecuteAndFlush return code: 0x80040e14 Stmt: [if user_name() != 't01' setuser 't01']
    C  sloledb.cpp [ExecuteAndFlush,line 6419]: Error/Message: (err 15157, sev 0), Setuser failed because of one of the following reasons: the database principal 't01' does not exist, its corresponding server principal does not have server access, this type of database principal cannot be impersonated, or you do not have permission.
    C  Procname: [ExecuteAndFlush - no proc]
    C  setuser 't01' failed -- connect terminated
    C  Using Provider SQLNCLI
    C  OpenOledbConnection: MARS property was set successfully.
    C  ExecuteAndFlush return code: 0x80040e14 Stmt: [if user_name() != 't01' setuser 't01']
    C  sloledb.cpp [ExecuteAndFlush,line 6419]: Error/Message: (err 15157, sev 0), Setuser failed because of one of the following reasons: the database principal 't01' does not exist, its corresponding server principal does not have server access, this type of database principal cannot be impersonated, or you do not have permission.
    C  Procname: [ExecuteAndFlush - no proc]
    C  setuser 't01' failed -- connect terminated
    C  Using Provider SQLNCLI
    C  OpenOledbConnection: MARS property was set successfully.
    C  ExecuteAndFlush return code: 0x80040e14 Stmt: [if user_name() != 't01' setuser 't01']
    C  sloledb.cpp [ExecuteAndFlush,line 6419]: Error/Message: (err 15157, sev 0), Setuser failed because of one of the following reasons: the database principal 't01' does not exist, its corresponding server principal does not have server access, this type of database principal cannot be impersonated, or you do not have permission.
    C  Procname: [ExecuteAndFlush - no proc]
    C  setuser 't01' failed -- connect terminated
    C  failed to establish conn to np:(local).
    C  Retrying without protocol specifier: (local)
    C  Using Provider SQLNCLI
    C  OpenOledbConnection: MARS property was set successfully.
    C  ExecuteAndFlush return code: 0x80040e14 Stmt: [if user_name() != 't01' setuser 't01']
    C  sloledb.cpp [ExecuteAndFlush,line 6419]: Error/Message: (err 15157, sev 0), Setuser failed because of one of the following reasons: the database principal 't01' does not exist, its corresponding server principal does not have server access, this type of database principal cannot be impersonated, or you do not have permission.
    C  Procname: [ExecuteAndFlush - no proc]
    C  setuser 't01' failed -- connect terminated
    C  Using Provider SQLNCLI
    C  OpenOledbConnection: MARS property was set successfully.
    C  ExecuteAndFlush return code: 0x80040e14 Stmt: [if user_name() != 't01' setuser 't01']
    C  sloledb.cpp [ExecuteAndFlush,line 6419]: Error/Message: (err 15157, sev 0), Setuser failed because of one of the following reasons: the database principal 't01' does not exist, its corresponding server principal does not have server access, this type of database principal cannot be impersonated, or you do not have permission.
    C  Procname: [ExecuteAndFlush - no proc]
    C  setuser 't01' failed -- connect terminated
    C  Using Provider SQLNCLI
    C  OpenOledbConnection: MARS property was set successfully.
    C  ExecuteAndFlush return code: 0x80040e14 Stmt: [if user_name() != 't01' setuser 't01']
    C  sloledb.cpp [ExecuteAndFlush,line 6419]: Error/Message: (err 15157, sev 0), Setuser failed because of one of the following reasons: the database principal 't01' does not exist, its corresponding server principal does not have server access, this type of database principal cannot be impersonated, or you do not have permission.
    C  Procname: [ExecuteAndFlush - no proc]
    C  setuser 't01' failed -- connect terminated
    C  failed to establish conn. 0
    B  ***LOG BY2=> sql error 0      performing CON [dbsh#2 @ 1204] [dbsh    1204 ]
    B  ***LOG BY0=> <message text not available> [dbsh#2 @ 1204] [dbsh    1204 ]
    B  ***LOG BY2=> sql error 0      performing CON [dblink#3 @ 431] [dblink  0431 ]
    B  ***LOG BY0=> <message text not available> [dblink#3 @ 431] [dblink  0431 ]
    M  ***LOG R19=> ThInit, db_connect ( DB-Connect 000256) [thxxhead.c   1411]
    M  in_ThErrHandle: 1
    M  *** ERROR => ThInit: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c   10205]
    M 
    M  Info for wp 0
    M 
    M    stat = 4
    M    reqtype = 1
    M    act_reqtype = -1
    M    rq_info = 0
    M    tid = -1
    M    mode = 255
    M    len = -1
    M    rq_id = 65535
    M    rq_source = 255
    M    last_tid = 0
    M    last_mode = 0
    M    semaphore = 0
    M    act_cs_count = 0
    M    control_flag = 0
    M    int_checked_resource(RFC) = 0
    M    ext_checked_resource(RFC) = 0
    M    int_checked_resource(HTTP) = 0
    M    ext_checked_resource(HTTP) = 0
    M    report = >                                        <
    M    action = 0
    M    tab_name = >                              <
    M    vm = no VM
    M 
    M  *****************************************************************************
    M  *
    M  *  LOCATION    SAP-Server sapr3s_T01_00 on host sapr3s (wp 0)
    M  *  ERROR       ThInit: db_connect
    M  *
    M  *  TIME        Thu Feb 08 09:02:44 2007
    M  *  RELEASE     700
    M  *  COMPONENT   Taskhandler
    M  *  VERSION     1
    M  *  RC          13
    M  *  MODULE      thxxhead.c
    M  *  LINE        10404
    M  *  COUNTER     1
    M  *
    M  *****************************************************************************
    M 
    M  PfStatDisconnect: disconnect statistics
    M  Entering TH_CALLHOOKS
    M  ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
    M  *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c   720]
    M  *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c  260]
    M  Entering ThSetStatError
    M  ThIErrHandle: do not call ThrCoreInfo (no_core_info=0, in_dynp_env=0)
    M  Entering ThReadDetachMode
    M  call ThrShutDown (1)...
    M  ***LOG Q02=> wp_halt, WPStop (Workproc 0 4732) [dpnttool.c   327]
    Please let me know what to do!
    Best Regards,
    Thomas

    Hi!
    Check that all enviroment variables are complete and still in place?
    JAVA_HOME and DBMS_TYPE and so on
    Also check that all exe files are of the same version, if not, make sure they are.
    You could also try to update disp+work
    rollo

  • Leopard Clients take a Long Time to Login (roughly 1~2 minutes)

    Hello all,
    I've spent the last few weeks scouring these groups and then net and searching and searching for someone with a similar problem to my own, but have come up pretty much empty handed and so now turn to here to see if any else has had this issue or can at least point me where to look to resolve the problem.
    I've got a clean install of a XServe running Leopard server 10.5.2 with OD, AFP services and User home folders configured and fully working.
    The problem:
    Clean install of Tiger client logs into the server (OD binded) perfectly. Takes maybe 15 seconds tops to for the client to log in and show the all the AFP mounts and client settings and user's desktop and files, etc.
    However, a fresh Leopard client install (OD binded) takes roughly 1~2 minutes to do the exact same thing.
    I've gone through any log file I can find on server and client side, checked my DNS running on this xserve, created new users without "home" folders, and searched just about everywhere for an answer to this issue and am still empty handed.
    This is not a show stopper issue, but there is something definitely not normal about what is happening with Leopard client logins.
    I'm trying to explain this as best as I can without making a wall of text, but I'm sure I'll forget something, so please ask questions if you have them.
    Things I'm seeing in the logs during the time of the login happening are:
    Server-side Logs:
    - Kerberos Server Log -
    Apr 14 11:27:39 ns1.mydomain.com krb5kdc[167](info): TGS_REQ (7 etypes {18 17 16 23 1 3 2}) 172.16.9.14: ISSUE: authtime 1208190459, etypes {rep=16 tkt=16 ses=16}, [email protected] for ldap/ns1.mydomain.com@NS1. MYDOMAIN.COM
    Apr 14 11:28:46 ns1.mydomain.com krb5kdc[167](info): AS_REQ (7 etypes {18 17 16 23 1 3 2}) 172.16.1.205: NEEDED_PREAUTH: CRC0002$@NS1. MYDOMAIN.COM for krbtgt/NS1. MYDOMAIN.COM@NS1. MYDOMAIN.COM, Additional pre-authentication required
    - Password Service Server Log -
    Apr 14 2008 11:43:03 KERBEROS-LOGIN-CHECK: user {0x47f3ab5903c4b01c0000002a0000002a, CRC0005$} is in good standing.
    Apr 14 2008 11:43:03 KERBEROS-LOGIN-CHECK: user {0x47f3ab5903c4b01c0000002a0000002a, CRC0005$} authentication succeeded.
    Apr 14 2008 11:43:04 RSAVALIDATE: success.
    Apr 14 2008 11:43:04 AUTH2: {0x47c721234c9608250000000700000007, myusername} DIGEST-MD5 authentication succeeded.
    Apr 14 2008 11:43:04 RSAVALIDATE: success.
    Apr 14 2008 11:43:04 AUTH2: {0x47c721234c9608250000000700000007, myusername} DHX authentication succeeded.
    Apr 14 2008 11:43:04 KERBEROS-LOGIN-CHECK: user {0x47c721234c9608250000000700000007, myusername} is in good standing.
    Apr 14 2008 11:43:04 KERBEROS-LOGIN-CHECK: user {0x47c721234c9608250000000700000007, myusername} authentication succeeded.
    Apr 14 2008 11:43:05 RSAVALIDATE: success.
    Apr 14 2008 11:43:05 AUTH2: {0x47c721234c9608250000000700000007, myusername} DHX authentication succeeded.
    Apr 14 2008 11:43:06 KERBEROS-LOGIN-CHECK: user {0x47f3ab5903c4b01c0000002a0000002a, CRC0005$} is in good standing.
    Apr 14 2008 11:43:06 KERBEROS-LOGIN-CHECK: user {0x47f3ab5903c4b01c0000002a0000002a, CRC0005$} authentication succeeded.
    Apr 14 2008 11:43:06 KERBEROS-LOGIN-CHECK: user {0x47c721234c9608250000000700000007, myusername} is in good standing.
    Apr 14 2008 11:43:06 KERBEROS-LOGIN-CHECK: user {0x47c721234c9608250000000700000007, myusername} authentication succeeded.
    Apr 14 2008 11:45:26 KERBEROS-LOGIN-CHECK: user {0x47f3ab5903c4b01c0000002a0000002a, CRC0005$} is in good standing.
    Apr 14 2008 11:45:26 KERBEROS-LOGIN-CHECK: user {0x47f3ab5903c4b01c0000002a0000002a, CRC0005$} authentication succeeded.
    Client Side Logs:
    - All Messages -
    4/14/08 10:09:12 AM loginwindow[9868] Login Window Started Security Agent
    4/14/08 10:15:01 AM loginwindow[9868] Login Window - Returned from Security Agent
    - Console Messages -
    4/14/08 10:15:03 AM com.apple.launchd[1] (com.apple.UserEventAgent-LoginWindow[9880]) Exited: Terminated
    - SingleSignOnTools.log -
    kdcmond cannot retreive the computer's local Hostname , retrying ..
    Kerberos configuration is up to date
    Kerberos configuration is up to date
    Kerberos configuration is up to date
    Kerberos configuration is up to date
    .. and so on
    All other logs don't appear to show anything of importance in between the time frame of Login window started and login window exited.
    I'd like to know what exactly the client workstation is doing during this time with the server, but it looks like it just hangs and does nothing since nothing shows up in the logs that I can find during this time period where the client hangs. Maybe I can try an Ethereal trace to see what traffic is being sent back and forth during this timeframe. I don't know if this is a configuration issue on my part or a OD / AFP bug on Apple's part since Tiger clients connect perfectly.
    Logouts happen immediately, so no problems there on that end. And everything else with the system is working flawlessly (besides the OD Crashing issue which I'm sure everyone is well aware of right now with 10.5.2).
    Thank you to anyone that can assist in shedding some light on this issue and I apologize if I didn't provide enough information.
    -Jessee

    FOUND IT!!! Well for our install anyway. The culprit was AUTH2.
    In our case computers would (randomly) have the same ..SLOW.. symptoms as your original post described, and the 'Apple Password Server log' on our server showed the same log entries.
    It turned out that Single-Sign-On was being screwed up by two Authentication Authorities as applied in the LDAP (Computer and User) Attributes,
    and showed up in the log as competing authentications from KERBEROS-LOGIN-CHECK and AUTH2. as follows:
    Apr 30 2008 16:22:17 RSAVALIDATE: success.
    Apr 30 2008 16:22:17 AUTH2: {0x4818c423083a8ddd0000000a0000000a, user} DIGEST-MD5 authentication succeeded.
    Apr 30 2008 16:22:17 RSAVALIDATE: success.
    Apr 30 2008 16:22:17 AUTH2: {0x4818c423083a8ddd0000000a0000000a, user} DHX authentication succeeded.
    Apr 30 2008 16:22:17 KERBEROS-LOGIN-CHECK: user {0x4818c423083a8ddd0000000a0000000a, user} is in good standing.
    Apr 30 2008 16:22:17 KERBEROS-LOGIN-CHECK: user {0x4818c423083a8ddd0000000a0000000a, user} authentication succeeded.
    Apr 30 2008 16:22:18 RSAVALIDATE: success.
    Apr 30 2008 16:22:18 AUTH2: {0x4818c423083a8ddd0000000a0000000a, user} DHX authentication succeeded.
    Now, all the entries in our log (for remote logins) show:
    May 2 2008 10:35:39 KERBEROS-LOGIN-CHECK: user {0x4818c423083a8ddd0000000a0000000a, user} is in good standing.
    May 2 2008 10:35:39 KERBEROS-LOGIN-CHECK: user {0x4818c423083a8ddd0000000a0000000a, user} authentication succeeded.
    May 2 2008 10:35:39 KERBEROS-LOGIN-CHECK: user {0x4818c423083a8ddd0000000a0000000a, user} is in good standing.
    May 2 2008 10:35:39 KERBEROS-LOGIN-CHECK: user {0x4818c423083a8ddd0000000a0000000a, user} authentication succeeded.
    May 2 2008 10:35:39 KERBEROS-LOGIN-CHECK: user {0x4818c423083a8ddd0000000a0000000a, user} is in good standing.
    May 2 2008 10:35:39 KERBEROS-LOGIN-CHECK: user {0x4818c423083a8ddd0000000a0000000a, user} authentication succeeded.
    i.e...Single-Sign-On and they're FAST.
    no more AUTH2 entries overlapping with KERBEROS.
    (local Authentications still show AUTH2 when using WGM)
    The solution was pretty straight forward, But only applies if the system is using Single-Sign-On with AFP shared home folders and the Authentication for AFP is set to Kerberos.
    Delete ;ApplePasswordServer entries from all user/computer combinations that are having problems.
    I actually deleted it from all users and Computers. (Except the Server Computer and Directory Administrator that uses WGM. When I tested these, WGM would not authenticate Diradmin)
    It can be done in the GUI from the inspector tab in WGM
    find the attibute
    dsAttrTypeStandard:AuthenticationAuthority
    click to open
    If there are two entries: ApplePasswordServer and Kerberosv5 then:
    Edit the ApplePasswordServer entry (You can copy the text into an editor and save it for future use if needed, all entries are the same for all computers and users, so you only need 1 copy, and you can paste it back into new entry to put it back,...If needed....maybe for older systems, mine are all Leopard.
    Now delete, OK, and Save the changes
    After its done, check the logs again to make sure that all remote logons now show
    KERBEROS-LOGIN-CHECK:
    and they should be FAST.
    Hope this helps
    Steve

  • How to get past I pod touch screen that says " I pod touch disabled, try again in 22000000 minutes"

    MY iPod touch is disabled ans says retry again in 22000000 minutes. When I attempt to restore, the software downloads but the device does not restore.  How do I bypass the disabled screen to put the iPod back in working order?  Please help.

    Maybe here:
    Restore loop (being prompted to restore again after a restore successfully completes)
    Troubleshoot your USB connection. If the issue persists, out-of-date or incorrectly configured third-party security software may be causing this issue. Please follow Troubleshooting security software issues. .

  • Client reconnection to conventional cluster taking about 9 minutes

    Hi,
    I've set up a 3 node OpenMq (4.4) conventional cluster and am having trouble with client reconnections when I simulate a halt on a node.
    I have two threads within the same process, sending to a pre-configured destination and replying using a temporary queue. Each have a JMS connection to the same home broker. If I bring the home broker down with either the imqcmd command or with a ctrl+c, the goodbye messages are sent and the client connections are immediately reestablished by the connection factory with the next broker. But... if I remove the broker from the cluster by simulating a BSOD, power failure, etc, no goodbye messages are sent (obviously) and the connected clients are left 'connected' to the dead broker and only reconnect to another broker after about 9 minutes.
    I read in the docs that the 'imqPingInterval' property can be used to test the client connections but it doesn't seem to be doing the trick. After I've cut the power to the broker's virtual machine, I'm seeing the ping messages in the logs, e.g.:
    FINEST: Outbound Packet:PING(54):296-127.0.1.1(bd:ea:13:9b:ae:a)-51155-1267024410861;BrokerAddress=10.59.148.9:7676(1082), ConnectionID=4090718717872600064, ReconnectEnabled: true, IsConnectedToHABroker: falseAt this point, telnet cannot connect to 10.59.148.9:7676 so it's definitely gone.
    Finally after about 9 minutes, the following shows up in the logs:
    24-Feb-2010 15:26:26 com.sun.messaging.jmq.jmsclient.ExceptionHandler throwJMSException
    FINER: I501
    com.sun.messaging.jms.JMSException: [C4002]: Read packet failed. - cause: java.net.SocketException: No route to host
            at com.sun.messaging.jmq.jmsclient.ExceptionHandler.getJMSException(ExceptionHandler.java:380)
            at com.sun.messaging.jmq.jmsclient.ExceptionHandler.handleException(ExceptionHandler.java:331)
            at com.sun.messaging.jmq.jmsclient.ProtocolHandler.readPacket(ProtocolHandler.java:1796)
            at com.sun.messaging.jmq.jmsclient.ReadChannel.run(ReadChannel.java:1197)
            at java.lang.Thread.run(Thread.java:619)
    Caused by: java.net.SocketException: No route to host
            at java.net.SocketInputStream.socketRead0(Native Method)
            at java.net.SocketInputStream.read(SocketInputStream.java:129)
            at java.io.BufferedInputStream.fill(BufferedInputStream.java:218)
            at java.io.BufferedInputStream.read1(BufferedInputStream.java:258)
            at java.io.BufferedInputStream.read(BufferedInputStream.java:317)
            at com.sun.messaging.jmq.io.ReadOnlyPacket.readFully(ReadOnlyPacket.java:271)
            at com.sun.messaging.jmq.io.ReadOnlyPacket.readFixedHeader(ReadOnlyPacket.java:191)
            at com.sun.messaging.jmq.io.ReadOnlyPacket.readPacket(ReadOnlyPacket.java:151)
            at com.sun.messaging.jmq.io.ReadWritePacket.readPacket(ReadWritePacket.java:82)
            at com.sun.messaging.jmq.jmsclient.ProtocolHandler.readPacket(ProtocolHandler.java:1758)
            ... 2 more
    24-Feb-2010 15:26:26 com.sun.messaging.jmq.jmsclient.ConnectionImpl logLifeCycle
    FINE: Connection closed.  The connection is closed due to a network problem, broker crashed, or internal error: BrokerAddress=10.59.148.9:7676(1082), ConnectionID=4090718717872604160, ReconnectEnabled: true, IsConnectedToHABroker: falseAnd we can then send/receive again.
    The connection factory details are as follows:
    Class:                  com.sun.messaging.ConnectionFactory
    getVERSION():           3.0
    isReadonly():           false
    getProperties():        {imqOverrideJMSPriority=false, imqConsumerFlowLimit=1000, imqOverrideJMSExpiration=false, imqAddressListIterations=1, imqLoadMaxToServerSession=true, imqConnectionType=TCP, imqPingInterval=30, imqSetJMSXUserID=false, imqConfiguredClientID=, imqSSLProviderClassname=com.sun.net.ssl.internal.ssl.Provider, imqJMSDeliveryMode=PERSISTENT, imqConnectionFlowLimit=1000, imqConnectionURL=http://localhost/imq/tunnel, imqBrokerServiceName=, imqJMSPriority=4, imqBrokerHostName=localhost, imqJMSExpiration=0, imqAckOnProduce=, imqEnableSharedClientID=false, imqAckTimeout=10000, imqAckOnAcknowledge=, imqConsumerFlowThreshold=50, imqDefaultPassword=guest, imqQueueBrowserMaxMessagesPerRetrieve=1000, imqDefaultUsername=guest, imqReconnectEnabled=true, imqConnectionFlowCount=100, imqAddressListBehavior=PRIORITY, imqReconnectAttempts=1, imqSetJMSXAppID=false, imqConnectionHandler=com.sun.messaging.jmq.jmsclient.protocol.tcp.TCPStreamHandler, imqSetJMSXRcvTimestamp=false, imqBrokerServicePort=0, imqDisableSetClientID=false, imqSetJMSXConsumerTXID=false, imqOverrideJMSDeliveryMode=false, imqBrokerHostPort=7676, imqQueueBrowserRetrieveTimeout=60000, imqSetJMSXProducerTXID=false, imqSSLIsHostTrusted=false, imqConnectionFlowLimitEnabled=false, imqReconnectInterval=3000, imqAddressList=mq://10.59.148.9,mq://10.59.148.17,mq://10.59.148.11, imqOverrideJMSHeadersToTemporaryDestinations=false}The brokers are virtualbox guests running 'WinXP 64' and the producer and consumer are both running on Ubuntu 9.10.
    Handling a machine failure seems like a pretty standard scenario for a cluster so I'm sure there's something I've mis-configured.
    Is there something I can do to fix this?
    If not, the only other alternatives I see are to either:
    1) Try the HA custer. But I'm not sure this will fix the problem if the client is waiting on a dead socket.
    2) Lower the message ack to something like 10 seconds and reconnect to the cluster for a retry every time we get a JMSException. But this is obviously not ideal either.
    Any suggestions would be great.
    Thanks,
    Nick

    Hi Nigel,
    The producer is configured to send messages every 5 seconds and the consumer is sitting with a message listener on the queue.
    The producer send is failing each time with the following trace...
    5-Feb-2010 12:13:19 com.sun.messaging.jmq.jmsclient.ProtocolHandler writePacketNoAck
    FINEST: Outbound Packet:OBJECT_MESSAGE(5):30-127.0.1.1(a2:3f:b1:e2:fd:33)-45573-1267099999075;BrokerAddress=10.59.148.9:7676(1184), ConnectionID=882185479630361088, ReconnectEnabled: true, IsConnectedToHABroker: false
    25-Feb-2010 12:13:19 com.sun.messaging.jmq.jmsclient.ProtocolHandler writePacketNoAck
    FINEST: sent packet ... OBJECT_MESSAGE(5):30-127.0.1.1(a2:3f:b1:e2:fd:33)-45573-1267099999075
    25-Feb-2010 12:13:19 com.sun.messaging.jmq.jmsclient.ProtocolHandler writePacketNoAck
    FINEST: Outbound Packet:PING(54):31-127.0.1.1(eb:66:36:db:8:79)-45574-1267099999156;BrokerAddress=10.59.148.9:7676(1184), ConnectionID=882185479630365184, ReconnectEnabled: true, IsConnectedToHABroker: false
    25-Feb-2010 12:13:19 com.sun.messaging.jmq.jmsclient.ProtocolHandler writePacketNoAck
    FINEST: sent packet ... PING(54):31-127.0.1.1(eb:66:36:db:8:79)-45574-1267099999156
    25-Feb-2010 12:13:24 com.sun.messaging.jmq.jmsclient.ProtocolHandler writePacketNoAck
    FINEST: Outbound Packet:PING(54):32-127.0.1.1(a2:3f:b1:e2:fd:33)-45573-1267100004156;BrokerAddress=10.59.148.9:7676(1184), ConnectionID=882185479630361088, ReconnectEnabled: true, IsConnectedToHABroker: false
    25-Feb-2010 12:13:24 com.sun.messaging.jmq.jmsclient.ProtocolHandler writePacketNoAck
    FINEST: sent packet ... PING(54):32-127.0.1.1(a2:3f:b1:e2:fd:33)-45573-1267100004156
    25-Feb-2010 12:13:24 com.sun.messaging.jmq.jmsclient.ProtocolHandler writePacketNoAck
    FINEST: Outbound Packet:PING(54):33-127.0.1.1(eb:66:36:db:8:79)-45574-1267100004156;BrokerAddress=10.59.148.9:7676(1184), ConnectionID=882185479630365184, ReconnectEnabled: true, IsConnectedToHABroker: false
    25-Feb-2010 12:13:24 com.sun.messaging.jmq.jmsclient.ProtocolHandler writePacketNoAck
    FINEST: sent packet ... PING(54):33-127.0.1.1(eb:66:36:db:8:79)-45574-1267100004156
    25-Feb-2010 12:13:29 com.sun.messaging.jmq.jmsclient.AckQueue printInfo
    WARNING: [W2003]: Broker not responding [OBJECT_MESSAGE(5)] for 10 seconds. Still trying..., broker addr=10.59.148.9:7676(1184), connectionID=882185479630361088, clientID=null, consumerID=14
    25-Feb-2010 12:13:29 com.sun.messaging.jmq.jmsclient.ExceptionHandler throwJMSException
    FINER: I501
    com.sun.messaging.jms.JMSException: [C4000]: Packet acknowledge failed. user=guest, broker=10.59.148.9:7676(1184)
         at com.sun.messaging.jmq.jmsclient.ProtocolHandler.writePacketWithAck(ProtocolHandler.java:712)
         at com.sun.messaging.jmq.jmsclient.ProtocolHandler.writePacketWithAck(ProtocolHandler.java:575)
         at com.sun.messaging.jmq.jmsclient.ProtocolHandler.writePacketWithReply(ProtocolHandler.java:430)
         at com.sun.messaging.jmq.jmsclient.ProtocolHandler.writeJMSMessage(ProtocolHandler.java:1919)
         at com.sun.messaging.jmq.jmsclient.WriteChannel.sendWithFlowControl(WriteChannel.java:154)
         at com.sun.messaging.jmq.jmsclient.WriteChannel.writeJMSMessage(WriteChannel.java:107)
         at com.sun.messaging.jmq.jmsclient.SessionImpl.writeJMSMessage(SessionImpl.java:770)
         at com.sun.messaging.jmq.jmsclient.MessageProducerImpl.writeJMSMessage(MessageProducerImpl.java:203)
         at com.sun.messaging.jmq.jmsclient.MessageProducerImpl.writeJMSMessage(MessageProducerImpl.java:192)
         at com.sun.messaging.jmq.jmsclient.MessageProducerImpl.send(MessageProducerImpl.java:624)
         at com.sun.messaging.jmq.jmsclient.QueueSenderImpl.send(QueueSenderImpl.java:97)
         at uk.co.mydomain.jms.ClientJmsConnection.sendMessage(ClientJmsConnection.java:278)
         at uk.co.mydomain.jms.JmsClientMessageBroker.sendMessage(JmsClientMessageBroker.java:147)
         at test.uk.co.mydomain.messaging.quicktest.QuickTest$2.run(QuickTest.java:67)Is there any trace I could get that may be useful?
    Thanks,
    Nick

  • Download error. Tap to retry.     Why? I have a wifi and still the same message?

    Download error. Tap to retry.... Why? I have a wifi connection and still the same message, and even connected to desktop the same for ipad. Help :-)

    I'm getitng the same thing.  I'm beyond sick of this iPad.  It's a third generation Retina Display and it turned into a pile of cat turds after iOS 7.  It got so bad I restored it and used iCloud. It was still god awful.  I restored it and didnt use the iCloud backup and hoped that whatever was wrong would be avoided....nope.  IF I can get a download going it nearly kills my entire iPad.  I will open the cover and wait over 30 seconds just for the screen to light up.  I will hit the home button to close an app and wait nearly a minute in some cases for it to actually close.  Then to top off all the annoyances it just fails and loops over and over. 
    I bought Apple products to avoid stuff like this.  Very unhappy.

  • With MS 7 IE 10 when installing FP I get prompt to close IE but it is closed - I retry to no avail

    Internet explorer 10 was recently updated on my computer from IE 9.  Now I can't install Flash Player any more.  I get the prompt to close Internet Explorer so I do then the prompt shows back up.  I wait a few minutes and retry again.  Still I get the prompt to close Internet Explorer.  I retry over and over but to no avail.  This is frustrating!

    See How to close Internet Explorer and other programs running on Windows?

  • There have been 7,039 failed login attempts in the last 30 minutes

    Hi,
    I am trying to find out the cause for an OEM alert we received:
    There have been 7,039 failed login attempts in the last 30 minutesThe cause is ofcourse known, but I can't find out why the application anyway was able to do 7000+ login attempts within half an hour. The account should have locked after 10 attempts
    The perticular account has a DEFAULT profile.
    Auditing is on, so if we look into DBA_AUDIT_SESSION it is clearly seen that within 1 minute approx 1200 failed login attempts occured without the account being locked.
    USERNAME USERHOST     RETURCODE      TIME              COUNT
    KRAMPV      DDE18LNB       1017     27-01-2012 13:54     235
    KRAMPV      VSV2SH221     1017     27-01-2012 13:54     271
    KRAMPV      VSV2SH222     1017     27-01-2012 13:54     258
    KRAMPV      VSV2SH223     1017     27-01-2012 13:54     263
    KRAMPV      VSV2SH224     1017     27-01-2012 13:54     266If we retry the login with a incorrect password manually from SQLplus, after 10 login attempts the account gets locked as expected.
    The above login attempts come from three application server of which I don't know how they handle failed logins.
    Can anyone point me into a search direction as to why the account didn't lock. Just for completeness some extra info about the account and the DEFAULT profile:
    User is created with:
    CREATE USER KRAMPV
    IDENTIFIED BY VALUES 'S:123456890'
    DEFAULT TABLESPACE KRAMPVDATA
    TEMPORARY TABLESPACE TEMP
    PROFILE DEFAULT
    ACCOUNT UNLOCK;
    GRANT RESOURCE TO KRAMPV;
    GRANT CONNECT TO KRAMPV;
    ALTER USER KRAMPV DEFAULT ROLE ALL;
    GRANT CREATE MATERIALIZED VIEW TO KRAMPV;
    GRANT CREATE VIEW TO KRAMPV;
    GRANT CREATE TABLE TO KRAMPV;
    GRANT ALTER ANY MATERIALIZED VIEW TO KRAMPV;
    ALTER USER KRAMPV QUOTA UNLIMITED ON KRAMPVDATA;
    ALTER USER KRAMPV QUOTA UNLIMITED ON KRAMPVARCH;The DEFAULT profile has the following settings:
    DEFAULT     COMPOSITE_LIMIT               UNLIMITED
    DEFAULT     PASSWORD_LOCK_TIME          UNLIMITED
    DEFAULT     PASSWORD_VERIFY_FUNCTION     NULL
    DEFAULT     PASSWORD_REUSE_MAX          UNLIMITED
    DEFAULT     PASSWORD_REUSE_TIME          UNLIMITED
    DEFAULT     PASSWORD_LIFE_TIME          180
    DEFAULT     FAILED_LOGIN_ATTEMPTS          10
    DEFAULT     PRIVATE_SGA               UNLIMITED
    DEFAULT     CONNECT_TIME               UNLIMITED
    DEFAULT     IDLE_TIME               UNLIMITED
    DEFAULT     LOGICAL_READS_PER_CALL          UNLIMITED
    DEFAULT     LOGICAL_READS_PER_SESSION     UNLIMITED
    DEFAULT     CPU_PER_CALL               UNLIMITED
    DEFAULT     CPU_PER_SESSION               UNLIMITED
    DEFAULT     SESSIONS_PER_USER          UNLIMITED
    DEFAULT     PASSWORD_GRACE_TIME          7The Oracle database version is 11.2.0.3
    The OS is AIX7.1
    I've been looking on MOS, but was unable to find a clue yets
    Thanks
    FJFranken
    Edit: For the record, after I discovered the above I changed the DEFAULT profile, so the account would not unlock itself anymore. If this problem will occur in the future, maybe we can get more info as the account - if it gets locked- should stay locked now:
    alter profile default limit PASSWORD_LOCK_TIME unlimited;Edited by: fjfranken on 3-feb-2012 2:56

    Girish Sharma wrote:
    I cann't say that resource_limit is not TRUE, because you are saying "If we retry the login with a incorrect password manually from SQLplus, after 10 login attempts the account gets locked as expected.", so it means profile is working for the "KRAMPV" user.
    The interesting thing is USERHOST is changing, so another option is the listener log should also have information about the failed connection attempts.
    My another guess is duplicate user in the database i.e. one is KRAMPV and another is "krampv" (with quotation mark). Just check in dba_users that is there something like exists or not.....
    select upper(username),count(*) from dba_users group by upper(username) having count(*) > 1;
    Regards
    Girish SharmaHi Girish,
    resource_limit is set to FALSE.
    And we've tested the locking with another user, because KRAMPV is used by the application that is running and we didn't want to risk that it got locked
    USERHOST is not changing, there are 4 hosts ( application servers ) doing the same thing, so connection requests are coming from 4 hosts concurrently.
    There is luckily no duplicate user.
    Thanks anyway, we will keep investigating. I also sent the information to the application provider.
    Bye
    FJFranken

Maybe you are looking for

  • Tried to install Firefox 8.0, it says I have a newer version, but have a 3.6.24. How come?

    When I use Firefox (3.6.24) I get a page saying I need the newest version, 8.0. I download the new one, move the file from "Fetched files" and put it on my desk, where I open it. As I, in dialogue field, drag Firefoxsymbol over to Applications map, i

  • External drive refuses to work and the other is very slow

    I was not sure if I should put this in Lion or macbook pro section since thats what I am trying on (mid 2010) version. Hi, I purchased maybe 4-6 months ago a Toshiba E05A100SBU3EW_C STOR.E ART 4 1TB USB 3.0 2.5 inch Hard Drive - Black from amazon and

  • **imac vs. Dell XPS 720 or new 630--Help!!

    Hi, I have been using windows and pc products for over 16 years. I am looking at getting the new imac 20" 2.4GHZ but, I am also looking at the Dell xps 720 and new 630. I am video editing quite a bit. I always use Vegas 8.0 Pro which is fantastic!(wi

  • Daily Show Multipass broken AGAIN! 3rd October 2011 -same issue as last week!

    As happened last week, multipass is broken again! Episode available to buy, but not to download as part of multipass. Only received last weeks episodes on Friday in one go due to problems at Apple. Looks like they haven't fixed the underlying problem

  • ValueListHandler with struts

    Hi, I am trying to use ValueListHandler for generating a report in my project. I am using DAO and DAOImplementor, which will be called by my EJB method. I get the result in my Helper class, which is actually set in session, if i intend to directly us