With MS 7 IE 10 when installing FP I get prompt to close IE but it is closed - I retry to no avail

Internet explorer 10 was recently updated on my computer from IE 9.  Now I can't install Flash Player any more.  I get the prompt to close Internet Explorer so I do then the prompt shows back up.  I wait a few minutes and retry again.  Still I get the prompt to close Internet Explorer.  I retry over and over but to no avail.  This is frustrating!

See How to close Internet Explorer and other programs running on Windows?

Similar Messages

  • I have an older Macbook with OS/X. Tried to download iTunes 10 a few times now, but when installing I always get the same error message: Run Preinstall Script for Apple Mobile Device Support. What can I do to finalise the installation?

    I have an older Macbook with OS/X. Tried to download iTunes 10 a few times now, but when installing I always get the same error message: Run Preinstall Script for Apple Mobile Device Support. What can I do to finalise the installation?

    Thanks. Short of the sort of "generic" suggestions of restaring your system, if you haven't, and repairing disk permissions and verifying the disk, I don't have any advice right now. I'll do some research and see if I can come across anything. Meanwhile, someone else may have an idea.
    Regards.

  • Can I combine a PC3200 DDR SDRAM with PC25300 DDR2 SO-DIMM when installing ram?

    Can I combine a PC3200 DDR SDRAM with PC25300 DDR2 SO-DIMM when installing ram? I am taking ram out of an iMac G5 ALS (2005) to add to the 1GB ram (3GB max) iMac late 2006 model.

    kbentz wrote:
    The slots are different sizes I have found out as well. Thanks for the advice!
    Yes, there is that small issue but even if they were the same slots you'd just be disappointed a little later.

  • Do I need to install boot camp on Windows 7 as well as on Lion? I already installed it some years ago on Leopard when installing Windows Vista on my Macbook Pro. But now after installing Windows 7, many things in windows doesn't work (sound etc.)

    Do I need to install boot camp on Windows 7 as well as on Lion? I already installed it some years ago on Leopard when installing Windows Vista on my Macbook Pro. But now after installing Windows 7, many things in windows doesn't work (sound etc.). I made a clean installation because I needed to go from 32 bit to 64 bit.
    Or should I just update bootcamp in Lion? (cause when I search for "boot camp" in Windows 7 there's no result)

    Installation Guide
    Instructions for all features and settings.
    Boot Camp 4.0 FAQ Get answers to commonly asked Boot Camp questions.
    Windows 7 FAQ Answers to commonly asked Windows 7 questions.
    Apple Boot Camp Support
    Lion's Boot Camp Assistant 4.x should have downloaded Apple drivers as part of also partitioning.
    You need Apple drivers. And you then need to add on your own audio driver.
    You can run Assistant at any time to download and save a set of drivers.

  • When installing Adobe Presenter, get error message plattform not compatible.

    When installing Adobe Presenter, get error message plattform not compatible.

    Check the tech specs to see if your system meets the minimum requirements for the software.

  • New pc with windows 8.1, downloaded and installed cs5,no problem open bridge and cs5, but can't read raw file , try to update, can't complete or failed updating, please help

    new pc with windows 8.1, downloaded and installed cs5,no problem open bridge and cs5, but can't read raw file , try to update, can't complete or failed updating, please help

    Sounds like you somehow got the mac version.
    Download the windows 6.7 camera raw update from this link:
    Adobe - Photoshop : For Windows : Camera Raw 6.7 Update

  • I just dowload and pay the new LR6. I already have the LR 5.7 on my PC with OS 8.1 64bits - when I try to enter the serial number Adobe informs me that there are no eligible product available - the list doesn't include the LR6 version ?

    I already have the LR 5.7 on my PC with OS 8.1 64bits - when I try to enter the serial number Adobe informs me that there are no eligible product available - the list doesn't include the LR6 version ?

    thank you very much!
    everything's allright
    bye

  • When installing Skype, I get error 2001

    Every time I try to installing Skype, I get the iTunes error 2001 (not very helpful at all)!
    The message push-up after I push the "Get App" button.
    /Tommy

    Pat,
    Thank you for responding. I'm experiencing the same runaround. I don't know which Illustrator link to click, and the one I did click wound up giving me the same error message. I think the problem is I need to download it to the Cloud or to Google Drive. I don't seem to have an option for where Illustrator can be downloaded. I read on the Chromebook website that there is no hard drive on a Chromebook, that everything needs to be downloaded and retrieved to/from the Cloud. I need CS6 Illustrator and also need Adobe Photoshop for my class.
    When I tried downloading I also noticed I was in an area for people who haven't paid. How do I download it as part of my subscription?
    If downloading to the Cloud is possible, how do I access and retrieve programs downloaded to it?
    Best,
    Stephanie

  • Just tried to open iTunes, it won't, and I'm getting a blank window with an OK button. When I press the OK button, iTunes closes. what is going on?

    Have just tried to open iTunes, and I get a blank window (no dialogue, just a blank window) with an OK button. When I press OK, it closes down (not having opened anything) and shuts down. I've tried opening while holding down the option key, as I would to open with a new iTunes folder, and I"m getting the same empty window with an OK. Very frustrating, has anyone seen this, and can anyone help?  Thanks in advance,  Kate

    so, I called a friend who's more experienced than I am. He walked me through some steps, checking iTunes and we got the same dialogue -free window with the OK button. We then uninstalled iTunes, downloaded it afresh, and it opened with no problems. Seems to all be there, music, tv, etc. Not sure what the issue was, but it has stopped this problem.

  • When i open safari an apple alert comes up with a phone number.  when i call i get put on hold forever.  how do i get this off there?

    when i open safari an apple alert comes up with a phone number to call.  when i call i get put on hold forever or no one calls me back.  how do i get this off there and what is it?

    It's a scam. Do not call the number. There are several ways to recover.
    1. Some of those scam pages can be dismissed very easily. Press the key combination command-W to close the tab or window. A huge box will pop up. Press the return key and both the box and the page will close. If that doesn't happen, continue.
    2. Press and hold command-W. You may hear repeating alert sounds. While holding the keys, click the OK button in the popup. A different popup may appear, which you can cancel out of as usual.
    3. From the Safari menu bar, select
              Safari ▹ Preferences... ▹ Security
    and uncheck the box marked Enable JavaScript. Leave the preferences dialog open.
    Close the malicious window or tab.
    Re-enable JavaScript and close the preferences dialog.
    4. If the Preferences menu item is grayed out, quit Safari. Force quit if necessary. Relaunch it by holding down the shift key and clicking its icon in the Dock. None of the windows and tabs will reopen.
    After closing the malicious page, from the menu bar, select
              Safari ▹ Preferences... ▹ Privacy ▹ Remove All Website Data
    to get rid of any cookies or other data left by the server. Open your Downloads folder and delete anything you don't recognize.

  • I cannot stop firefox running or see firefox screen I tried to unstall firefox,get message to close firefox,but cannot see firefoxscreen. i shut down and restated computer with no success

    I tried updating firefox as well and get message to close firefox first

    You need "sysinternal's process explorer", it is free and can replace the Microsoft process explorer, that you get by "CTRL+ALT+DELETE". Either program will allow you to kill the instances of FF that didn't die as they should have, when you closed them. Sysinternal is easier to use, it is a graphic display with many options. Do not push "CTRL+ALT+DELETE" twice unless you want to reboot, that is its default behaviour under Microsoft.

  • How to deal with a shared network connection when installing 10 EX

    I am in the process of setting up a Virtual PC XP environment on my Vista Business machine to load Oracle EX in the virtual environment. I am having an issue of receiving a shared network connection with my broadband wireless card within the virtual XP SP3 environment, which Internet access is required for the Oracle EX installation. I checked out a couple tech sites and could not find a solution. I might have to get an Internet access at home from TWC.
    How to resolve this conflict? Thanks.
    Edited by: user10368779 on Aug 27, 2009 2:09 PM

    I am not sure how +"I am having an issue of receiving a shared network connection with my broadband wireless card within the virtual XP SP3 environment"+ can be resolved on an Oracle forum? There are probalby Windows experts on the forum but I would personally aim for a Windows forum.
    You may want to double check if Oracle XE is even running in a Virtual PC environment before starting this exercise.
    -Andyt

  • When installing iTunes I get the following message "Apple mobile device failed to start.  Verify that you have sufficient privileges to start system services.  What am I supposed to do?  I have tried unstalling and reinstalling the software

    When I was trying to install the update to itunes I would get the following message "Service 'Apple Mobile Device' (Apple Mobile Device) failed to start.  Verify that you have sufficient privileges to start system services.  I could "Abort" "Retry" or "Ignore"  I tried all of them starting with retry first.  Nothing worked.  I then uninstalled Itunes and tried to reinstall and received the same message.  Not sure how to take care of it so that I can use Itunes again.

    Try Troubleshooting issues with iTunes for Windows updates.
    tt2

  • When installing itunes i get the error message

    I tunes could not be installed because visual basic script is not installed or has been disabled
    i am a bit thick so if anyone could help i would be grateful

    I'd start with the following document, with one modification. At step 12 after typing GEARAspiWDM press the Enter/Return key once prior to clicking OK. (Pressing Return adds a carriage return in the field and is important.)
    iTunes for Windows: "Registry settings" warning when opening iTunes

  • When Installing iTunes I get an Error Message About A Registry Key

    It gives me this error message:
    Could not open key:
    HKEYLOCALMACHINE\Software\Classes\QuickTimePlayerLib.QuickTimePlayerApp\CLSID. Verify that you have sufficient access to that key, or contact your support personnel.
    I can't find that error listed anywhere on the iTunes support site. How can I fix this?
    Windows XP Pro
      Windows XP Pro  

    Could not open key:
    HKEYLOCALMACHINE\Software\Classes\
    QuickTimePlayerLib.QuickTimePlayerApp\CLSID
    some folks have been having some success with pgfpdwife's technique in the following post:
    pgfpdwife: Re: Could not open key HKEYLOCALMACHINE\Software\Classic\Quicktime.Quicktime\
    note carefully that the technique involves a registry edit. be sure to make a backup of any keys you edit. if you're unfamiliar with your registry or registry editing, head to your XP help and support, do a search on registry, and read through the articles that come up.
    There are also some instructions on how to back up registry keys in the following document:
    Error 1406 or 1402 appears when you install iTunes or QuickTime for Windows

Maybe you are looking for

  • Why is latency for sync messages more than async messages in PI?

    Hi All, Is it normal thing for Sync messages to have more latency time than async messages in PI. if yes then what is the reason behind it? Also whats the appropriate latency time in PI? Thanks

  • Java Web Start and Firefox

    Hello! I want to use some java web start applications, which are started directly by clicking a link. My browser (firefox) doesn't know the java web start mime type (*.jnlp). Because of that I can only download the specific JNLP-File instead of execu

  • Print on my btyahoo mail is too small to read

    the print is getting smalller very difficult to read

  • Steps to activate Quality tab during GR (MIGO)

    Hi All, I need to activate the quality tab during GR. I have included the Quality management view in MM, and have maintained the inspection type as "01" Goods receipt inspection for order. I am unable to see the quality tab during GR(MIGO) Let me kno

  • WL6.0SP1 - LDAP authentication based on LDAPAttribute values

    Hi, I have set up LDAP with Weblogic 6.0 SP1 to use web application security. It is properly authenticating users when I specify the principals in weblogic.xml, corresponding to role-names in web.xml. Now, I don't have groups in my LDAP. But each use