30EA2 - refuses to unload results into new file
With ver 3.0.02.83 I'm getting "Not writable" message every time when I try to unload the results into a new file. SqllDeveloper refuses to write to a new file and I have to preallocate it first and then answer yes on override question.
Does anybody else have the same situation?
On what OS version?
K.
Similar Messages
-
Write the ldapsearch results into a file
We are using ldapsearch from the command line and want to write the search results into a file. How can we do this?
What OS are you using - If Unix / Linux then use the standard redirection > or >> facility.
-
Write big query results into a file ? ? ?
Hi all,
The problem is: I want to write a simple query results into a file. I have no idea how to do that. Only thing I know is utl_ functions. Please advise GURUS how can I use them for big queries. Any example will be really appreciable.
Thank you in advance.
Message was edited by:
v838hi,
i´ld do it like that:
filedir varchar2(30):= '/usr/frajo/';
filename varchar2(30):= 'file.txt';
fhandle utl_file.file_type;
cursor x is
select ... (what ever)
begin
fhandle := utl_file.fopen (filedir, filename,'a');
open x;
loop
fetch x into (what ever)
exit when x%notfound;
utl_file.put_line (fhandle,'text and you results');
end loop;
utl_file.fclose(fhandle);
end;
happy xmas. franz -
Merge Multiple CSV Files Into One and save it into new file
Below code run in specific directory. However I'm looking a code which will select the folder & save it into new sheet.
Can you help me with this? I've searched for a solution for a long time but could not find anything which worked.
The following is the start of the macro code
Sub OpenCSV()
Dim i As Integer
' change this next line to reflect the actual directory
Const strDir = "C:\Documents and Settings\shekar\"
Dim ThisWB As Workbook
Dim wb As Workbook
Dim ws As Worksheet
Dim strWS As String
Set ThisWB = ActiveWorkbook
Set fs = Application.FileSearch
With fs
.LookIn = strDir
.Filename = "*.csv"
If .Execute(SortBy:=msoSortByFileName, _
SortOrder:=msoSortOrderAscending) > 0 Then
For i = 1 To .FoundFiles.Count
Set wb = Workbooks.Open(.FoundFiles(i))
strWS = wb.Sheets(1).Name
wb.Sheets(1).UsedRange.Copy (ThisWB.Worksheets(strWS).Range("A1"))
wb.Close False
Next i
Else
MsgBox "There were no files found."
End If
End With
End SubThe below will do the.But be careful if any of csv file name is more than 31 then Excel will not allow it to name the sheet with filename.
Sub OpenCSV()
Dim i As Integer
' change this next line to reflect the actual directory
Const strDir = "C:\Documents and Settings\shekar\"
Dim ThisWB As Workbook
Dim wb As Workbook
Dim ws As Worksheet
Dim strWS As String
Dim sFileName As String
Set ThisWB = ActiveWorkbook
With Application.FileDialog(msoFileDialogOpen)
.InitialFileName = strDir
.Filters.Clear
.Filters.Add "CSV Files", "*.csv"
If .Show Then
For i = 1 To .SelectedItems.Count
Set wb = Workbooks.Open(.SelectedItems(i))
sFileName = .SelectedItems(i)
Set ws = ThisWB.Worksheets.Add(before:=ThisWB.Worksheets(1))
ws.Name = ActiveSheet.Name
wb.Sheets(1).UsedRange.Copy ws.Range("A1")
wb.Close False
Next i
Else
MsgBox "There were no files found."
End If
End With
End Sub
Please do not forget to click “Vote as Helpful” if any post helps you and
Mark as Answer if it solves the issue. -
Search in Nested Tables and Insert the result into new Nested Table!
How can I search in Nested Tables ex: (pr_travel_date_range,pr_bo_arr) using the SQL below and insert the result into a new Nested Table: ex:g_splited_range_arr.
Here are the DDL and DML SQLs;
Don't worry about the NUMBER( 8 )
CREATE OR REPLACE TYPE DATE_RANGE IS OBJECT ( start_date NUMBER( 8 ), end_date NUMBER( 8 ) );
CREATE OR REPLACE TYPE DATE_RANGE_ARR IS TABLE OF DATE_RANGE;
DECLARE
g_splited_range_arr DATE_RANGE_ARR := DATE_RANGE_ARR( );
g_travel_range DATE_RANGE := DATE_RANGE( '20110101', '99991231' );
g_bo_arr DATE_RANGE_ARR := DATE_RANGE_ARR( DATE_RANGE( '20110312', '20110317' ), DATE_RANGE( '20110315', '20110329' ) );
FUNCTION split_date_sql( pr_travel_date_range DATE_RANGE,
pr_bo_arr DATE_RANGE_ARR )
RETURN DATE_RANGE_ARR
IS
l_splited_range_arr DATE_RANGE_ARR;
BEGIN
SELECT start_date, end_date
INTO l_splited_range_arr(start_date, end_date)
FROM (WITH all_dates
AS (SELECT tr_start_date AS a_date, 0 AS black_out_val FROM TABLE( pr_travel_date_range )
UNION ALL
SELECT tr_end_date, 0 FROM TABLE( pr_travel_date_range )
UNION ALL
SELECT bo_start_date - 1, 1 FROM TABLE( pr_bo_arr )
UNION ALL
SELECT bo_end_date + 1, -1 FROM TABLE( pr_bo_arr )),
got_analytics
AS (SELECT a_date AS start_date,
LEAD( a_date ) OVER (ORDER BY a_date, black_out_val) AS end_date,
SUM( black_out_val ) OVER (ORDER BY a_date, black_out_val) AS black_out_cnt
FROM all_dates)
SELECT start_date, end_date
FROM got_analytics
WHERE black_out_cnt = 0 AND start_date < end_date
ORDER BY start_date);
RETURN l_splited_range_arr;
END;
BEGIN
g_splited_range_arr := split_date_sql(g_travel_range,g_bo_arr);
FOR index_g_splited_range_arr IN g_splited_range_arr .FIRST .. g_splited_range_arr .LAST LOOP
DBMS_OUTPUT.PUT_LINE('g_splited_range_arr[' || index_g_splited_range_arr || ']: ' || g_splited_range_arr(index_g_splited_range_arr).start_date || '-' || g_splited_range_arr(index_g_splited_range_arr).end_date );
END LOOP;
EXCEPTION
WHEN NO_DATA_FOUND
THEN
NULL;
WHEN OTHERS
THEN
NULL;
END;Or can I create a VIEW with parameters of Nested Tables in it so I can simply call
SELECT *
BULK COLLECT INTO g_splited_range_arr
FROM view_split_date(g_travel_range,g_bo_arr);@riedelme
For your questions:
1) I don't want to store in the database as a nested table
2) I don't want to retrieve data from the database. Data will come from function split_date() parameter and data will be processed in the function and function will return it in nested table format. For more detail please look at the raw function SQL.
I have a SQL like:
WITH all_dates
AS (SELECT tr_start_date AS a_date, 0 AS black_out_val FROM travel
UNION ALL
SELECT tr_end_date, 0 FROM travel
UNION ALL
SELECT bo_start_date - 1, 1 FROM black_out_dates
UNION ALL
SELECT bo_end_date + 1, -1 FROM black_out_dates),
got_analytics
AS (SELECT a_date AS start_date,
LEAD( a_date ) OVER (ORDER BY a_date, black_out_val)
AS end_date,
SUM( black_out_val ) OVER (ORDER BY a_date, black_out_val)
AS black_out_cnt
FROM all_dates)
SELECT start_date, end_date
FROM got_analytics
WHERE black_out_cnt = 0 AND start_date < end_date
ORDER BY start_date;I want to change the tables black_out_dates and travel to Nested Array so I can use it in a function with Nested Array travel and Nested Array black_out_dates parameters and the function will return Nested Array of date ranges.
Here is what I want in raw SQL:
DECLARE
g_splited_range_arr DATE_RANGE_ARR := DATE_RANGE_ARR( );
g_travel_range DATE_RANGE := DATE_RANGE( '20110101', '99991231' );
g_bo_arr DATE_RANGE_ARR := DATE_RANGE_ARR( DATE_RANGE( '20110312', '20110317' ), DATE_RANGE( '20110315', '20110329' ) );
FUNCTION split_date_sql( pr_travel_date_range DATE_RANGE,
pr_bo_arr DATE_RANGE_ARR )
RETURN DATE_RANGE_ARR
IS
l_splited_range_arr DATE_RANGE_ARR;
BEGIN
SELECT start_date, end_date
INTO l_splited_range_arr(start_date, end_date)
FROM (WITH all_dates
AS (SELECT tr_start_date AS a_date, 0 AS black_out_val FROM TABLE( pr_travel_date_range )
UNION ALL
SELECT tr_end_date, 0 FROM TABLE( pr_travel_date_range )
UNION ALL
SELECT bo_start_date - 1, 1 FROM TABLE( pr_bo_arr )
UNION ALL
SELECT bo_end_date + 1, -1 FROM TABLE( pr_bo_arr )),
got_analytics
AS (SELECT a_date AS start_date,
LEAD( a_date ) OVER (ORDER BY a_date, black_out_val) AS end_date,
SUM( black_out_val ) OVER (ORDER BY a_date, black_out_val) AS black_out_cnt
FROM all_dates)
SELECT start_date, end_date
FROM got_analytics
WHERE black_out_cnt = 0 AND start_date < end_date
ORDER BY start_date);
RETURN l_splited_range_arr;
END;
BEGIN
g_splited_range_arr := split_date_sql(g_travel_range,g_bo_arr);
FOR index_g_splited_range_arr IN g_splited_range_arr .FIRST .. g_splited_range_arr .LAST LOOP
DBMS_OUTPUT.PUT_LINE('g_splited_range_arr[' || index_g_splited_range_arr || ']: ' || g_splited_range_arr(index_g_splited_range_arr).start_date || '-' || g_splited_range_arr(index_g_splited_range_arr).end_date );
END LOOP;
EXCEPTION
WHEN NO_DATA_FOUND
THEN
NULL;
WHEN OTHERS
THEN
NULL;
END;I must change the tables black_out_dates and travel in a way so it will be something like
FROM TABLE( pr_travel_date_range )to get the result into l_splited_range_arr so it will be something like
SELECT start_date, end_date
INTO l_splited_range_arr(start_date, end_date)
FROM ( -
How to programmatically extract VL10C results into a file?
Hi Experts,
I need to extract VL10C results programmatically into a file for a downstream non-SAP application to consume.
What's the best way to do it in a ABAP program?
Many thanks!
-Lilyif you have some enhancement points (ECC) or user exit before the data is thrown to show on screen, use Export to memory in the code of VL10C and write one custom program where you import that memory to a local structure.
OR
Schedule a background job of this program get the spool and download the spool to local file.
There are lots of program in SCN / WIKI and lots of thread which would help more to do this... -
Export query results into .csv file?
Hello I have a T-SQL script that gets row counts for a specified date range and then needs to loop (by incrementing +1 day to get the next day's counts) for a large date range. I'm aiming to output & append each query results day counts
into a .csv file via a SQL Agent job since this will take quite a while to complete.
Would using the following as an example template...
INSERT INTO OPENROWSET('Microsoft.ACE.OLEDB.12.0','Text;Database=D:\;HDR=YES;FMT=Delimited','SELECT * FROM [FileName.csv]')
SELECT Field1, Field2, Field3
FROM DatabaseName
...be the method or something else?
If this is good to use I've tried running this but get the following error:
Msg 7357, Level 16, State 2, Line 76
Cannot process the object "SELECT * FROM [FileName.csv]". The OLE DB provider "Microsoft.ACE.OLEDB.12.0" for linked server "(null)" indicates that either the object has no columns or the current user does not have permissions
on that object.
Thanks in advance.Hi Techresearch7777777,
The error in your post says that the file FileName.csv has to be created with the column names in the first row. Like:
Field1,Field2,Field3
Either you can create a schema.ini file under the same folder:
[FileName.csv]
Format=CSVDelimited
ColNameHeader=False
Col1=Field1 [DataType]
Col2=Field2 [DataType]
Col3=Field3 [DataType]
For the [DataType],you can reference
Schema.ini File (Text File Driver)
If you have any question, feel free to let me know.
Eric Zhang
TechNet Community Support -
Loading Query results into a file/cache
Hi,
We have a Query which returns huge volume of data.
spooling all the records will take a lot of time.
Is there any other way through which we can load the results of this huge query into Oracle's Cache / File
Tables used in the Query are Range hash composite partitioned tables.
But, in the query only a single partition is being used.
Suggest any method to acheive the same.
Thanks,
Kris.Alex Nuijten wrote:
.... Blu, you're not suggesting that OP use the database what it's good for, are you?.... But then OP would loose database-independence...
:)Ermm.... darn it, you're right, what was I thinking. ;)
Anyway, should there really be a requirement to output the data to a file, then there's nothing wrong with using UTL_FILE...
SQL> ed
Wrote file afiedt.buf
1 declare
2 v_fh UTL_FILE.FILE_TYPE;
3 begin
4 v_fh := UTL_FILE.FOPEN('TEST_DIR','output.txt','w',32767);
5 DBMS_OUTPUT.PUT_LINE(TO_CHAR(SYSDATE,'HH24:MI:SS'));
6 FOR i IN (SELECT * FROM large_tbl)
7 LOOP
8 UTL_FILE.PUT_LINE(v_fh,
9 TO_CHAR(i.large_id,'fm999999')||','||
10 i.large_area||','||
11 TO_CHAR(i.large_line,'fm999999')||','||
12 TO_CHAR(i.datelogged,'DD/MM/YYYY')||','||
13 TO_CHAR(i.large_flag,'fm9')||','||
14 '"'||i.large_text||'"');
15 END LOOP;
16 DBMS_OUTPUT.PUT_LINE(TO_CHAR(SYSDATE,'HH24:MI:SS'));
17 UTL_FILE.FCLOSE(v_fh);
18* end;
SQL> /
09:01:08
09:05:20
PL/SQL procedure successfully completed.
Elapsed: 00:04:12.47
SQL> select count(*) from largetbl;
COUNT(*)
6637873Over 6.5 million records in 4 minutes 12 seconds, and that's with data formatting. -
Recalling Spreadsheets and appending results into 1 file.
Hi,
i am in a stage of my program where i have to do numerical analysis on a set of data collected by an Optical spectrum analyser... the data has been saved in multiple spreadsheets... (each with a row for the wavelengths, x-values, and power, y-values)...i need to get the power values and put them all in 1 spreadsheet file, with the wavelngth values in the first row.
so multiple 2D spreadsheets: Wavelength: x1 x2 x3 .....
Power 1 : P1 P2 P3....
Wavelngth: x1 x2 x3...
Power 2 : p1 p2 p3...
Will turn to: Wavelength: x1 x2 x3...
Power11 P2 P3...
Power21 p2 p3...
attached below is my attempt at doing this, which doesnt seem to work. The loops are present so that 'read from spreadsheet' vi recalls all the spreadhseets...which it does do... but i don't know how to improve it so that all the files succesfully append into 1 2D array (as shown above).
Please can someone help me figure out how to do this (recall multiple spreadsheets and then save into 1). right now only the files being recalled in the last loop iteration are saved into the single spreadsheet.
the file paths of the spreadsheets are all dependent on the number (N) so the file paths are such that 00.txt,01.txt,02.txt,03.txt...0N.txt, 10.txt,11.txt...1N.txt,20.txt,21.txt... etc ...NN.txt and teh final file will be RESULTS.txt (as seen in the pic)
Any input will be greatly appreciated, it seems like an easy concept, but the answer totally evades me.
thanks a lot,
Asiri
Attachments:
Savespreadsheet.jpg 121 KBas you can see in the image, i have used the required VIs to recall and save the spreadsheets, what i am having problems with is appending ALL of the spreadsheets, my loops are not working properly, i only append a select number of spreadsheets/arrays together dependent on the loop iterations,
perhaps its something wrong with the way i got everything wired? i index at the outer loop, however this information gets lots in subsequent iterations... what i need ideally is some sort of VI which inserts sub arrays into consequative rows in an array though just one input (such as in my loops).
any suggestions are greatly appreciated.
thank you!
asiri
Attachments:
Savespreadsheet.jpg 121 KB -
Select query results into excel file
Hi,
I want to put the results of a select query in an csv file(tab separated columns). I dont want to spool command for this . Is there any other method to do this.
ThanksTo get data from oracle to excel to use odbc driver to achive this.
-
How to save data results into text file
I want to solve an equation of degree 2 for example, and results are displayed in a text file
Like many other software coding forums, we don't want to give hand outs. We are more than happy to give hand ups. Show that you've tried to figure out the problem and show us where you are stuck. Then we will be glad to help you get you unstuck. If we just give you an answer, you will learn nothing.
As far as writing to a text file, look in the File I/O palette for the Write to Text File primitive. Also, if you go to Help->Find Examples... and do a search for "text file" you will get some examples of how to use it.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines -
Convert jsp processed result into a file??
when a JSP file has been processed, it returns HTML codes to browser, so how can i get that pure HTML source code and save it in an other html files.
If you have a good idea, open your JSP file and (in Sun ONE anyways) you can right click and do "Show JSP Code in Servlet" since a JSP is just translated into a servlet anyways (you could alos find the <Your JSP>.java file in your web server's working directory.
Anyways you will see a lot of out.println() statements where out is the response writer. So your options are:
1. Create a FileWriter fwOut and copy all the out.println() statements and paste them as fwOut.println()'s.
2. Create a class (or find one) that mimics the tee functionality in the UX world ie the class myTee opens the respose writer and the FileWriter, then some method (like myTeePrintln()) would take the input as a string and write it to both the response and FileWriter (and flush the streams).
3. http://nitric.com/jnp/source/jnp-src/Tee.java
If helps, I'm hungry for Dukies!
--Thunder -
Autoextend tablespace into new file
I have a small program that captures images and from time to time the users fill up the image tablespace and I have to manually create a new tablespace. The way I have it setup is that my image tablespace is set to 2GB (the name of the datafile is /opt/oracle/oradata/image1.dbf). How can I (or CAN I) have Oracle (or my program) automatically create another datafile when space is getting low on the 1st. I thought about creating a bigger file to start with, but I don't want to chew up that much space unless it's needed (some clients need it, some don't).
Edited by: user461089 on Aug 27, 2009 11:52 AMOracle allows data files to autoextend. You can have it automatically increase the size of image1.dbf (or whatever other data files you have in the tablespace). You cannot have Oracle automatically add new data files to a tablespace, though you could certainly write a job (DBMS_JOB or DBMS_SCHEDULER) that would periodically look at the free space in a tablespace and add a data file if there was too little free space. I'm not sure I see the benefit to doing this rather than letting data files grow, though.
Justin -
Insert into Flat File with no data
Hello,
One of my client is encountering a problem in loading data from oracle table to a Flat File.
We are using a IKM SQL to File.
A staging area different from Target and defined on the source Logical Schema.
and options Genreate Header and Insert rows.
The problem is :
At the end of the interface execution, which finish without error we see in the file, the header correctly generated which let me think that there's no permission problem with the file.
But there is no records...
And I don't know why ???
There is the .bad and .error files but they are empty.
The file datastore seems to be well declared with the good delimiters....
We are using the Sunopsis Driver File :
com.sunopsis.jdbc.driver.FileDriver
jdbc:snps:file
Cause the file are not accepted with the new one ...
Note that all our interfaces which are reading flat file work fine.
But there's no one writting in which work.
If somebody ever had this problem, or just have an idea about this let me know please.
Cordially,
BM"Bonjour",
I usually use the snpsoutfile API to unload data into flat file.
It's not the exact solution at your question, but i's a technical solution. -
Unable to save the webi report results in CSV file in XIR2 environment
Hi Team,
We have one WebI report in BOXIR2 version and it fetching nearly 76+ records in the report. The report is running fine without any issues and when i am trying to export the results into CSV file we are getting the error msg (Maximum Binary file size exceeded WIS30271). The file size is more than 80MB and hence it throwing this error. I have checked the Maximun Binary File size that is set in CMC and it is set to 80MB.
When i ran the same query in the database and exporting the results in to csv file the file size is under 80MB. I would like to know the reason why there is a difference in the file size when running the query manually in database and exporting in to csv file and to export the results set in to csv through business objects.Below are the possible causes to get this error message:
1] When a large Web Intelligence report is exported to CSV format, we get error: Max Binary file size limit exceeded. The document is too large to be processed by the server. Error WIS 30271
Cause
This error message appears because BusinessObjects Enterprise allows documents to be saved with the limit specified for Web Intelligence Report server settings in the Central Management Console(CMC).
To resolve the error follow the below steps:
- Login to Central Management Console (CMC) using BusinessObjects Enterprise "Administrator".
- Navigate to "Home >> Servers".
- Click on "Web Intelligence Report Server" to open its properties.
- Increase the "Maximum Binary File Size"(Default value=50 MBytes; Maximum value = 65535 MBytes).
- Click on "Apply" and then on "Update".
- Allow the Web Intelligence server to restart.
2] In Web Intelligence, when attempting to save a report to Excel or Portable Document Format (PDF), the following error message appears:
"Max binary file size limit exceeded. The document is too large to be processed by the server. Contact your database administrator. (Error: WIS 30271)".
Cause:
This error message appears because Business Objects Enterprise allows documents to be saved up to the limit set for Web Intelligence Report Server in the Central Management Console (CMC). The default file size limit is 50 megabytes for binary file types like PDF and Excel.
To resolve this error message, you will need to increase the Max Binary file size value.
1. Open the CMC.
2. Browse to Servers
3. Click on your Web Intelligence Report Server.
4. On the Properties page, increase the Maximum Binary File Size.
5. Apply the setting and allow the Web Intelligence Report Server to restart.
Increasing these values too high could impact Web Intelligence performance when users attempt to save excessively large files.
Hope this helps.
Maybe you are looking for
-
How can I create a redirect to an URL like in SICF?
Hi, we offer the payroll (com.sap.pct.erp.ess.paycheck_service / sap.com/ess~rem/payslip2) in our portal which is a Java-WD. Whenever we import a modified version of the corresponding HRFORM into the P-system the application aborts with an error bec
-
My computer keeps defaulting from a GB format to US format keyboard with a US flag in the top bar. How do I get it to go back to a GB flag and stay with a GB flag? This only started 2 days ago. I have seen much on line as this seems to be a common pr
-
What does this error message mean? (startup disk memory)
Hello, I am running OS 10.7.2 (Lion) on a new'ish 27 inch iMac, and I am getting the following error message appearing randomly on my screen: "Your Mac OS X startup disk has no more space available for application memory" There is a yellow exclamatio
-
Unblocking proposal run from program
Dear experts, i am in development stage of releasing strategy for payment (automatic payment- f110), we need to know how to unblock payment proposal from program. the scenario is 1. payment proposal will be created - but made the configuration to blo
-
I was trying to create a TO with LT01 and mvt type 999. Its giving an error - 'Putaway in storage section 'A' is not allowed. It is not allowing to delete these storage sections. I have only 2 storage sections for this storage type. 1.Why this error