3110 Classic ... How do I display the date a text ...

Hello All
I've checked the manual ... I've rooted through the phone settings ... I've read the site's FAQs ... I've searched these discussion boards !
Can any kind soul please tell me - how do I persuade my phone to tell me the date a text was received ?
It cheerfully shows the time - which is fine if I remember to check the phone on a daily basis. However, if I've omitted to check for a few days, knowing the time, but not the date, is less than helpful.
Am I just having a blind spot ... or is a date stamp for received texts not available on this model ?
Many thanks, Anonany
Solved!
Go to Solution.

Thank you, JimmyIreland !
Believe it or not ... I had tried looking under Message Details.
What I hadn't thought to do - until prompted by your reply - was to "arrow/scroll down" to move to the next section of the screen !
Many thanks for taking the time and trouble to put me out of my misery.
Kind regards, Anonany

Similar Messages

How can I display the data in table in separate column?

I have a vi reading data one by one in the same column.
How can I display the data with separate column?
like this:
data 1 | read | read
data 2 | read | read
data 3 | read | read
(would you mind if I will ask for an example
because it is much easier for me to work
with an example)
THANK YOU.

If you're reading your data in as a 1D array, this is as simple as using the Reshape Array to make a 2D array. I've attached an example in LabVIEW 6.1 format. The example rearranges a single column of data fill several columns horizontally, but you can easily modify this code to fill the columns downward instead.
Attachments:
Data_Column_Example.vi ‏18 KB

How can I display the date and time from the playhead info as a subtitle ?

Is there any way it is possible to display the video capture data and time during playback. I have seen some discussion on creating subtitles to do this, it would be nice if one could simply add a Title template with display fields for playhead information so that it automatically gets created during rendering.
In case you are wondering why on earth anyone would want this, I would like to use this for display on multisport racing videos.
Thanks

There is a Date/Time title in the titles browser, does just what it says...

How can I display the date on a jsp page??

Is there anyway to display the current date when someone views a jsp page??? Can I get it from the server or something like that?
Thx
Rich

is there any type of formatting that goes witth
that.....Most definitely -- check out the java.text.DateFormat object and its cohort java.text.SimpleDateFormat.
For example, if you wanted to display the current date in MM/DD/YYYY format, you could do the following:
<%-- This could go somewhere near the top of the JSP %>
<%
SimpleDateFormat f = new SimpleDateFormat("MM/dd/yyy");
%>
<% And later on, you could have... %>
<%= f.format(new Date()); %>Note that I've omitted the proper <%import%> directives.
-Navin

How can I display the date a word document was last modified on my web page?

I have lists of links to word documents on my web pages. I
want to be able to show the date the word document was last
modified next to each link. My pages are straight html.
Thanks.

>but I would have to go to each individual file (I have
hundreds) and put this code on each link.
No, you can use the FileSystemObject to get a list of the
files in the directory. See if you can adapt this for your site:
<link href="/CSS/dirlist.css" rel="stylesheet"
type="text/css">
<%
Function FormatSize(SizeInBytes)
if SizeInBytes > 1024^2 then
FormatSize = formatnumber(SizeInBytes / 1024^2,2) & "
MB"
elseif SizeInBytes > 1024 then
FormatSize = formatnumber(SizeInBytes / 1024,2) & " KB"
else
FormatSize = SizeInBytes & " Bytes"
end if
end function
%>
<%
dim parts
dim part
dim BrowseLine
dim RelLink
dim i
url = Request.ServerVariables("URL")
Parts = split(URL,"/")
for part = 1 to ubound(Parts)-1
' calc link
RelLink = ""
for i = 1 to ubound(Parts) - part - 1
RelLink = RelLink & "..\"
next
If trim(BrowseLine) <> "" then
BrowseLine = BrowseLine & "/"
end if
BrowseLine = BrowseLine & "<A href=" & RelLink
& ">" & parts(part) & "</A>"
next
' add "back" link
BrowseLine = Browseline & "  " &
"<A href='javascript:history.back();'><img
src='/images/return.gif' border=0></A>"
Response.Write "<P class = 'NavTop'>" & BrowseLine
& "</P>"
Dim fso
set fso = server.CreateObject("Scripting.fileSystemObject")
dim fldr
dim fle
%>
<a href="../index.asp"><img
src="../images/leftbanner.jpg" width="343" height="70"
border="0"></a>
<link href="/CSS/dirlist.css" rel="stylesheet"
type="text/css">
</p>
<p></p>
<table width="85%" border="0" cellspacing="0"
cellpadding="0">
<tr>
<th width="63%"><div
align="left">   Document
Name</div></th>
<th width="14%">Size</th>
<th width="23%"><div
align="left">  Date</div></th>
</tr>
<%
' display folders
for each fldr in
fso.GetFolder(server.MapPath(".")).SubFolders
%>
<tr>
<td class="FileName"> <a href='<%=
fldr.Name %>'><img src="/images/folder.gif" border=0>
<%= fldr.Name %></a></td>
<td class="FileSize">  <%=
FormatSize(fldr.Size) %></td>
<td class="FileDate"><div
align="left">  <%=
FormatDateTime(fldr.DateLastModified,2)
%></div></td>
</tr>
<%
next
%>
<%
' display files
for each fle in fso.GetFolder(server.MapPath(".")).Files
dim ext
ext = fso.GetExtensionName(fle.path)
if (ext <> "asp") and (ext <> "scc") then
%>
<tr>
<td class="FileName"> <a href='<%=
escape(fle.Name) %>'><img src="/images/file.gif"
width="14" height="16" border=0>
<%= fle.Name %></a></td>
<td class="FileSize">  <%=
FormatSize(fle.Size) %></td>
<td class="FileDate"><div
align="left">  <%=
FormatDateTime(fle.DateLastModified,2) %></div></td>
</tr>
<%
end if
next
Set fso = Nothing
Set fle = Nothing
Set fldr = Nothing
%>
</table>
<p><a href="/index.asp">Return to Home
Page</a></p>

How to dynamically display the data from a table base on row selection of another table in ADF

Hi ,
I have a requirement in ADF. I need to change the data of a table based on row selection of another Table . Both the table have a Parent Child relationship between them. They have a common attribute say department_id.
                                                                                     For this I created bind variable in view object of employees table and wrote a where clause in the sql query using that bind variable. Then I created method for selection listener of department Table in java bean.
My method is following
    public void onrowselection(SelectionEvent selectionEvent) {
        RichTable richTable = (RichTable)selectionEvent.getSource();
                        CollectionModel tableModel = (CollectionModel)richTable.getValue();
                        JUCtrlHierBinding adfTableBinding = (JUCtrlHierBinding)tableModel.getWrappedData();
                        Object selectedRowData = richTable.getSelectedRowData();
                        JUCtrlHierNodeBinding nodeBinding = (JUCtrlHierNodeBinding)selectedRowData;
                oracle.jbo.domain.Number newVal = (oracle.jbo.domain.Number) nodeBinding.getAttribute("DepartmentId");
                Number pallet = newVal.bigDecimalValue();
                System.out.println("Selected values " + pallet);
        BindingContext bindingctx = BindingContext.getCurrent();
                      BindingContainer bindings = bindingctx.getCurrentBindingsEntry();
                      DCBindingContainer bindingsImpl = (DCBindingContainer) bindings;
              DCIteratorBinding dciter = bindingsImpl.findIteratorBinding("EmployeesView1Iterator");//access the iterator by its ID value in the PageDef file
                      ViewObject vo =dciter.getViewObject();
                      vo.setNamedWhereClauseParam("DepartmentId", pallet);//enter your value
                      vo.executeQuery();
It is printing the selected value of department id from department table in the log. But it is not able to pass the value to employees view. It is showing the following error in the log
"Definition DepartmentId of type Variable is not found in EmployeesView1."
I will be very thankful if someone helps me to solve this errror or is there any other way to achieve the same requirement.
Thanks
Nilesh

Note quite sure why you simply wont create a viewlink for the viewobject the tables are based on..
The viewlink attribute will be based on the departmentId and it's a simple master detail relationship which automatically uses ppr.
However, if both tables are on the same page; using your hack about;
On the underlying viewobject, define a viewcriteria e.g. "listById" and set your bind variable here.
I would bind table two to a RichTable component:
RichTable t2;
public void onrowselection(SelectionEvent selectionEvent) {
        RichTable richTable = (RichTable)selectionEvent.getSource();
                        CollectionModel tableModel = (CollectionModel)richTable.getValue();
                        JUCtrlHierBinding adfTableBinding = (JUCtrlHierBinding)tableModel.getWrappedData();
                        Object selectedRowData = richTable.getSelectedRowData();
                        JUCtrlHierNodeBinding nodeBinding = (JUCtrlHierNodeBinding)selectedRowData;
                oracle.jbo.domain.Number newVal = (oracle.jbo.domain.Number) nodeBinding.getAttribute("DepartmentId");
                Number pallet = newVal.bigDecimalValue();
                System.out.println("Selected values " + pallet);
               refreshTable2(pallet);
        BindingContext bindingctx = BindingContext.getCurrent();
                      BindingContainer bindings = bindingctx.getCurrentBindingsEntry();
                      DCBindingContainer bindingsImpl = (DCBindingContainer) bindings;
              DCIteratorBinding dciter = bindingsImpl.findIteratorBinding("EmployeesView1Iterator");//access the iterator by its ID value in the PageDef file
                      ViewObject vo =dciter.getViewObject();
                      vo.setNamedWhereClauseParam("DepartmentId", pallet);//enter your value
                      vo.executeQuery();
private void refreshTable2(Number pallet){
RichTable x=getT2();
CollectionModel cm=(CollectionModel)x.getValue();
JUCtrlHierBinding jcb=(JUCtrlHierBinding)cm.getWrappedData();
BindingContainer bindings = bindingctx.getCurrentBindingsEntry();
DCBindingContainer bindingsImpl = (DCBindingContainer) bindings;
DCIteratorBinding dciter = bindingsImpl.findIteratorBinding(jcb.getName()+"Iterator");
ViewObject vo =dciter.getViewObject();
ViewCriteriaManager vcm=vo.getViewCriteriaManager();
ViewCriteria vc=vcm.getViewCriteria("listById");
vo.applyViewCriteria(vc);
vo.setNamedWhereClauseParam("DepartmentId",pallet);
vo.executeQuery();
AdfFacesContext.getCurrentInstance().addPartialTarget(getT2());

On iPhone 6, How do I display the date, time, and location where a photo was taken

On my previous iPhone (4S), I used the "Info' option in iPhoto to see where and when a photo was taken. I have a new phone (iOS 8.3) and iPhoto is not supported, so I have to use the Photos app. I cannot figure out how to see where and when a photo was taken in the Photos app. Thanks for any insight anyone can provide.

Hello there, marklewis.
When wanting to find location information of photos on your iOS device in iOS 8, the online User Guide provides some great information for how to search:
View photos and videos - iPhone
View by location. While viewing by year or by collection, tap . Photos and videos that include location information appear on a map, showing where they were taken.
While viewing a photo or video, tap to show and hide the controls. Swipe left or right to go forward or backward.
Search photos. From Albums or Photos, tap to search by date (month and year), or place (city and state). Search also keeps your Recent Searches on hand and gives you a list of suggested searches.
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

Calculating the total in alv and displaying the date

Hi,
I am trying to calculate the totals of netwr and fkimg in a report but the following coding cannot giv me the right answer so if there is anyone with the solution for this problem may you please help me out and how can i display the date on my report......here is my coding:
REPORT Z_DAILY_STOCK_NEW.
TYPE-POOLS: SLIS.
                   TABLES
TABLES: vbrk, kna1,vbrp,vbap,vbak, sflight.
           ALV FIELDS
DATA: it_fieldcat TYPE SLIS_T_FIELDCAT_ALV WITH HEADER LINE,
      wa_fieldcat TYPE slis_fieldcat_alv.
DATA: w_cnt LIKE sy-tabix.
     total ref to data.
    t_alv LIKE TABLE OF s_error WITH HEADER LINE.
DATA: gr_layout TYPE slis_layout_alv,
      gr_tab_group TYPE slis_t_sp_group_alv,
      gr_repid LIKE sy-repid,
      gr_events TYPE slis_t_event,
      gr_print TYPE slis_print_alv,
      gr_user   TYPE slis_formname VALUE 'USER_COMMAND'.
         SELECTION SCREEN
SELECT-OPTIONS:
s_werks FOR vbrp-werks,
s_auart FOR vbak-auart.
         DEFINITION OF AN INTERNAL TABLE
DATA: begin of i_stocktab occurs 0,
         kunag LIKE vbrk-kunag,
         name1 LIKE kna1-name1,
         ort01 LIKE kna1-ort01,
         inco1 LIKE vbrk-inco1,
         vkgrp LIKE vbrp-vkgrp,
         fkimg LIKE vbrp-fkimg,
         netwr LIKE vbrk-netwr,
      end of i_stocktab.
         START OF SELECTION
   SELECT vbrkkunag kna1name1 kna1ort01 vbrkinco1 vbrp~vkgrp
          vbrpfkimg vbrknetwr
          FROM kna1 inner join vbrk on kna1kunnr EQ vbrkkunrg
                    inner join vbak on kna1kunnr EQ vbakkunnr
                    inner join vbrp on vbrkvbeln EQ vbrpvbeln
          INTO i_stocktab
          WHERE vbrp~werks IN s_werks
          AND   vbak~auart IN s_auart.
          APPEND i_stocktab.
   ENDSELECT.
*DATA tb_alv TYPE i_stocktab WITH HEADER LINE.
PERFORM build_fieldcatalog.
PERFORM build_layout.
PERFORM build_event.
PERFORM build_print.
PERFORM calc_total.
PERFORM display_alv_report.
FORM build_fieldcatalog.
w_cnt = 1.
it_fieldcat-fieldname = 'KUNAG'.
it_fieldcat-seltext_m = 'Soldtp'.
it_fieldcat-col_pos   = w_cnt.
it_fieldcat-emphasize = 'X'.
it_fieldcat-key       = 'X'.
APPEND it_fieldcat TO it_fieldcat.
CLEAR it_fieldcat.
w_cnt = w_cnt + 1.
it_fieldcat-fieldname = 'NAME1'.
it_fieldcat-seltext_m = 'Name'.
it_fieldcat-col_pos   = w_cnt.
it_fieldcat-emphasize = 'X'.
APPEND it_fieldcat TO it_fieldcat.
CLEAR it_fieldcat.
w_cnt = w_cnt + 1.
it_fieldcat-fieldname = 'ORT01'.
it_fieldcat-seltext_m = 'City'.
it_fieldcat-col_pos   = w_cnt.
it_fieldcat-emphasize = 'X'.
APPEND it_fieldcat TO it_fieldcat.
CLEAR it_fieldcat.
w_cnt = w_cnt + 1.
it_fieldcat-fieldname = 'INC01'.
it_fieldcat-seltext_m = 'Incoterms'.
it_fieldcat-col_pos   = w_cnt.
it_fieldcat-emphasize = 'X'.
APPEND it_fieldcat TO it_fieldcat.
CLEAR it_fieldcat.
w_cnt = w_cnt + 1.
it_fieldcat-fieldname = 'VKGRP'.
it_fieldcat-seltext_m = 'Sales Group'.
it_fieldcat-col_pos   = w_cnt.
it_fieldcat-emphasize = 'X'.
APPEND it_fieldcat TO it_fieldcat.
CLEAR it_fieldcat.
w_cnt = w_cnt + 1.
it_fieldcat-fieldname = 'FKIMG'.
it_fieldcat-seltext_m = 'Invoiced Qty'.
it_fieldcat-col_pos   = w_cnt.
it_fieldcat-emphasize = 'X'.
*it_fieldcat-do_sum = 'x'.
APPEND it_fieldcat TO it_fieldcat.
CLEAR it_fieldcat.
w_cnt = w_cnt + 1.
it_fieldcat-fieldname = 'NETWR'.
it_fieldcat-seltext_m = 'Invoiced Value'.
it_fieldcat-col_pos   = w_cnt.
it_fieldcat-emphasize = 'X'.
it_fieldcat-do_sum    = 'x'.
APPEND it_fieldcat TO it_fieldcat.
CLEAR it_fieldcat.
ENDFORM.
FORM build_layout.
    gr_layout-no_input           = 'X'.
    gr_layout-colwidth_optimize = 'X'.
    gr_layout-totals_text        = 'Totals: '(201).
    gr_layout-detail_popup       = 'X'.
ENDFORM.
FORM build_event.
DATA i_event TYPE slis_alv_event.
CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
     EXPORTING
       i_list_type = 0
     IMPORTING
       et_events   = gr_events[].
   READ TABLE gr_events WITH KEY name = slis_ev_user_command
                        INTO i_event.
   if sy-subrc = 0.
     MOVE gr_user TO i_event-form.
     APPEND i_event TO gr_events.
   endif.
ENDFORM.
*FORM calc_total.
LOOP AT it_fieldcat into wa_fieldcat
WHERE fieldname EQ 'FKIMG' OR
       fieldname EQ 'NETWR'.
       wa_fieldcat-do_sum   = 'X'.
       wa_fieldcat-datatype = 'QUAT'.
modify it_fieldcat from wa_fieldcat.
ENDLOOP.
*ENDFORM.
FORM build_print.
     gr_print-reserve_lines = '2'.
     gr_print-no_coverpage = 'X'.
ENDFORM.
FORM calc_total.
DATA: total type ref to data,
      subtotal1 type ref to data.
field-symbols <fkimg> like sflight.
field-symbols <netwr> like sflight.
call method grid1-> get_subtotals
     importing
        ep_collect00 = subtotal
        ep_collect01 = total.
assign total to <fkimg>.
assign total to <netwr>.
ENDFORM.
*&          FUNCTION ALV DISPLAY
FORM display_alv_report.
gr_repid = sy-repid.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
   I_CALLBACK_PROGRAM                = gr_repid
   I_CALLBACK_USER_COMMAND           = slis_ev_user_command
   I_CALLBACK_TOP_OF_PAGE            = 'TOP-OF-PAGE' " see FORM
   IS_LAYOUT                         = gr_layout
   IT_FIELDCAT                       = it_fieldcat[]
   IT_SPECIAL_GROUPS                 = gr_tab_group
   I_SAVE                            = 'X'
   IT_EVENTS                         = gr_events
   IS_PRINT                          = gr_print
TABLES
    t_outtab                          = i_stocktab
EXCEPTIONS
    PROGRAM_ERROR                     = 1
    OTHERS                            = 2.
IF sy-subrc <> 0.
ENDIF.
ENDFORM.
FORM top-of-page.
*ALV Header deaclarations
DATA: t_header TYPE slis_t_listheader,
        wa_header TYPE slis_listheader,
        t_line LIKE wa_header-info,
        ld_lines TYPE i,
        ld_linesc TYPE c.
*Title
   wa_header-typ = 'H'.
   wa_header-info = 'Report for daily Stock Returns'.
   APPEND wa_header TO t_header.
   CLEAR wa_header.
*Total No. Records Selected
DESCRIBE TABLE i_stocktab LINES ld_lines.
ld_linesc = ld_lines.
CONCATENATE 'Total No. of Records Selected:' ld_linesc
                          INTO t_line SEPARATED BY space.
wa_header-typ = 'A'.
wa_header-info = t_line.
APPEND wa_header TO t_header.
CLEAR: wa_header, t_line.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
      EXPORTING
         it_list_commentary = t_header.
ENDFORM.

Try This
REPORT z_daily_stock_new.
TYPE-POOLS: slis.
* TABLES
TABLES: vbrk, kna1,vbrp,vbap,vbak, sflight.
* ALV FIELDS
DATA: it_fieldcat TYPE slis_t_fieldcat_alv WITH HEADER LINE,
wa_fieldcat TYPE slis_fieldcat_alv.
DATA: w_cnt LIKE sy-tabix.
* total ref to data.
* t_alv LIKE TABLE OF s_error WITH HEADER LINE.
DATA: gr_layout TYPE slis_layout_alv,
gr_tab_group TYPE slis_t_sp_group_alv,
gr_repid LIKE sy-repid,
gr_events TYPE slis_t_event,
gr_print TYPE slis_print_alv,
gr_user TYPE slis_formname VALUE 'USER_COMMAND'.
* SELECTION SCREEN
SELECT-OPTIONS:
s_werks FOR vbrp-werks,
s_auart FOR vbak-auart.
* DEFINITION OF AN INTERNAL TABLE
DATA: BEGIN OF i_stocktab OCCURS 0,
kunag LIKE vbrk-kunag,
name1 LIKE kna1-name1,
ort01 LIKE kna1-ort01,
inco1 LIKE vbrk-inco1,
vkgrp LIKE vbrp-vkgrp,
fkimg LIKE vbrp-fkimg,
netwr LIKE vbrk-netwr,
END OF i_stocktab.
* START OF SELECTION
SELECT vbrk~kunag kna1~name1 kna1~ort01 vbrk~inco1 vbrp~vkgrp
vbrp~fkimg vbrk~netwr
FROM kna1 INNER JOIN vbrk ON kna1~kunnr EQ vbrk~kunrg
INNER JOIN vbak ON kna1~kunnr EQ vbak~kunnr
INNER JOIN vbrp ON vbrk~vbeln EQ vbrp~vbeln
INTO i_stocktab
WHERE vbrp~werks IN s_werks
AND vbak~auart IN s_auart.
APPEND i_stocktab.
ENDSELECT.
*DATA tb_alv TYPE i_stocktab WITH HEADER LINE.
PERFORM build_fieldcatalog.
PERFORM build_layout.
PERFORM build_event.
PERFORM build_print.
PERFORM calc_total.
PERFORM display_alv_report.
*       FORM build_fieldcatalog                                       *
FORM build_fieldcatalog.
w_cnt = 1.
it_fieldcat-fieldname = 'KUNAG'.
it_fieldcat-seltext_m = 'Soldtp'.
it_fieldcat-emphasize = 'X'.
it_fieldcat-key = 'X'.
APPEND it_fieldcat TO it_fieldcat.
CLEAR it_fieldcat.
w_cnt = w_cnt + 1.
it_fieldcat-fieldname = 'NAME1'.
it_fieldcat-seltext_m = 'Name'.
it_fieldcat-emphasize = 'X'.
APPEND it_fieldcat TO it_fieldcat.
CLEAR it_fieldcat.
w_cnt = w_cnt + 1.
it_fieldcat-fieldname = 'ORT01'.
it_fieldcat-seltext_m = 'City'.
it_fieldcat-col_pos = w_cnt.
it_fieldcat-emphasize = 'X'.
APPEND it_fieldcat TO it_fieldcat.
CLEAR it_fieldcat.
* w_cnt = w_cnt + 1.
* it_fieldcat-fieldname = 'INC01'.
* it_fieldcat-seltext_m = 'Incoterms'.
* it_fieldcat-emphasize = 'X'.
* APPEND it_fieldcat TO it_fieldcat.
* CLEAR it_fieldcat.
w_cnt = w_cnt + 1.
it_fieldcat-fieldname = 'VKGRP'.
it_fieldcat-seltext_m = 'Sales Group'.
APPEND it_fieldcat TO it_fieldcat.
CLEAR it_fieldcat.
w_cnt = w_cnt + 1.
it_fieldcat-fieldname = 'FKIMG'.
it_fieldcat-seltext_m = 'Invoiced Qty'.
it_fieldcat-emphasize = 'X'.
it_fieldcat-ref_tabname = 'VBRP' .
it_fieldcat-ref_fieldname = 'FKIMG' .
it_fieldcat-do_sum = 'X' .
* *it_fieldcat-do_sum = 'x'.
APPEND it_fieldcat TO it_fieldcat.
CLEAR it_fieldcat.
w_cnt = w_cnt + 1.
clear it_fieldcat .
it_fieldcat-fieldname = 'NETWR'.
it_fieldcat-seltext_m = 'Invoiced Value'.
it_fieldcat-emphasize = 'X'.
it_fieldcat-ref_tabname = 'VBRP' .
it_fieldcat-ref_fieldname = 'NETWR' .
it_fieldcat-do_sum = 'X' .
* it_fieldcat-do_sum = 'x'.
APPEND it_fieldcat TO it_fieldcat.
CLEAR it_fieldcat.
ENDFORM.
*       FORM build_layout                                             *
FORM build_layout.
gr_layout-no_input = 'X'.
gr_layout-colwidth_optimize = 'X'.
gr_layout-totals_text = 'Totals: '(201).
gr_layout-detail_popup = 'X'.
ENDFORM.
*       FORM build_event                                              *
FORM build_event.
DATA i_event TYPE slis_alv_event.
CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
       EXPORTING
            i_list_type = 0
       IMPORTING
            et_events   = gr_events[].
READ TABLE gr_events WITH KEY name = slis_ev_user_command
INTO i_event.
IF sy-subrc = 0.
    MOVE gr_user TO i_event-form.
    APPEND i_event TO gr_events.
ENDIF.
ENDFORM.
*FORM calc_total.
* LOOP AT it_fieldcat into wa_fieldcat
* WHERE fieldname EQ 'FKIMG' OR
* fieldname EQ 'NETWR'.
* wa_fieldcat-do_sum = 'X'.
* wa_fieldcat-datatype = 'QUAT'.
* modify it_fieldcat from wa_fieldcat.
* ENDLOOP.
*ENDFORM.
FORM build_print.
gr_print-reserve_lines = '2'.
gr_print-no_coverpage = 'X'.
ENDFORM.
*       FORM calc_total                                               *
FORM calc_total.
DATA: total TYPE REF TO data,
subtotal1 TYPE REF TO data.
* FIELD-SYMBOLS <fkimg> LIKE sflight.
* FIELD-SYMBOLS <netwr> LIKE sflight.
* CALL METHOD grid1-> get_subtotals
* IMPORTING
* ep_collect00 = subtotal
* ep_collect01 = total.
* ASSIGN total TO <fkimg>.
* ASSIGN total TO <netwr>.
ENDFORM.
*& FUNCTION ALV DISPLAY
FORM display_alv_report.
gr_repid = sy-repid.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
       EXPORTING
            i_callback_program      = gr_repid
            i_callback_user_command = slis_ev_user_command
            i_callback_top_of_page = 'TOP-OF-PAGE' " see FORM
            is_layout               = gr_layout
            it_fieldcat             = it_fieldcat[]
            it_special_groups       = gr_tab_group
            i_save                  = 'X'
            it_events               = gr_events
            is_print                = gr_print
       TABLES
            t_outtab                = i_stocktab
       EXCEPTIONS
            program_error           = 1
            OTHERS                  = 2.
IF sy-subrc <> 0.
ENDIF.
ENDFORM.
*       FORM top-of-page                                              *
FORM top-of-page.
*ALV Header deaclarations
DATA: t_header TYPE slis_t_listheader,
wa_header TYPE slis_listheader,
t_line LIKE wa_header-info,
ld_lines TYPE i,
ld_linesc TYPE c.
*Title
wa_header-typ = 'H'.
wa_header-info = 'Report for daily Stock Returns'.
APPEND wa_header TO t_header.
CLEAR wa_header.
*Total No. Records Selected
DESCRIBE TABLE i_stocktab LINES ld_lines.
ld_linesc = ld_lines.
CONCATENATE 'Total No. of Records Selected:' ld_linesc
INTO t_line SEPARATED BY space.
wa_header-typ = 'A'.
wa_header-info = t_line.
APPEND wa_header TO t_header.
CLEAR: wa_header, t_line.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
       EXPORTING
            it_list_commentary = t_header.
ENDFORM.

To Display the whole long text on a report display

Hi All,
Pls let me know how can i display the full long text in a column of a report display. I am getting the long text from the function module READ_TEXT.
This is very urgent
Thanx in advance
Suresh

Do you have a fixed column width. If so, do you want to break the text up into lengths of that fixed length.
Example...
<b>Sales Order Item Material Long Text</b>
123456       10    6000000   This is the long
                             text of the material
                             6000000 for the
                             sales order 123456.
Regards,
Rich Heilman

How to display the data in a multichannel task

The task is composed of reading data from 12 virtual channels, how can I display the real time data in these 12 channels separately after the DAMx read. I tried to use the Select Signals function in the Express. but that means i have to use 12 of them for all the channels. Is there a better way to do that? thanks
Attachments:
untitled.JPG ‏17 KB

1) In your analog input task, you've added 20 channels. So, the order of the data in the array is simply the order in which you added the channels. Is what you have not working?
2) Since you are using numerics as display (not graphs), you don't need to use the Wfm datatype, and thus have all that coercing going on. I would setup the Sample Clock after your AI Task and wire it to Continuous Samples, "rate" of 1000, and set the polymorphic Read to 2D DBL NChan NSamp, and pick the data out of the resulting 2D array. Each row is a channel. Average the row to get a simple DBL value.
3) You don't have to wire a number to each of the Index Array inputs if you expect to get the data sequentially. When you drag the Index Array, LabVIEW assumes you want to get the data sequentially. (that was covered by Dennis as I was typing)
edit: yeah, You should not use the word "real time" and have a 1000mS loop!
Message Edited by Broken Arrow on 03-16-2009 07:32 AM
Message Edited by Broken Arrow on 03-16-2009 07:34 AM
Richard
Attachments:
untitled.GIF ‏36 KB

How to fetch the data & display the data if fields got the same name in alv

hi frnds, i need ur help.
how to fetch the data & display the data if fields got the same name in alv grid format.
thanks in advance,
Regards,
mahesh
9321043028

Refer the url :
http://abapexpert.blogspot.com/2007/07/sap-list-viewer-alv.html
Go thru the guide for OOPs based ALV.
Use SET_TABLE_FOR_FIRST_DISPLAY to display the table:
CALL METHOD grid->set_table_for_first_display
EXPORTING
I_STRUCTURE_NAME = 'SFLIGHT' Structure data
CHANGING
IT_OUTTAB = gt_sflight. Output table
You can also implement
Full Screen ALV, its quite easy. Just pass the output table to FM REUSE_ALV_GRID_DISPLAY.
For controlling and implementing the FS-ALV we have to concentrate on few of the components as follows :
1. Selection of data.
2. Prepare Layout of display list.
3. Event handling.
4. Export all the prepared data to REUSE_ALV_GRID_DISPLAY.
Regd,
Vishal

How to display the data in XML files into JSP using Jdeveloper.

Hi All,
I have two XML files one XML file has the view names and the other has the table names of a particular views, how to display the data in JSP using JDeveloper where when i click a particular view the list of tables of that particular view from XML file two should be displayed in JSP Page.
Are there any reference documents, regarding the above process please can anyone guide through how to do it.

Let the servlet ask your business tier to provide the data, then stuff it into beans, and pack those into the Session instance. Then forward the request to the JSP, let the JSP get those beans and display them.

Camileo S20 - How to display the date and time

Hi, to all. I have got as Christmas present the Camileo S20 and I am not able to display the date and time at video. In manual is no mention about this, just how to set the correct date and time. But what is intention of setting the date and time into camera, if it is not possible to display them on video ?

Hi,
of course, I did it repeatly, it is written in my question above. I am not stupid.
This question is aimed to owners of camera Camileo S20 and also Camileo S10 - Camileo S20 is derived of Camileo S10, may be any of them discovered the way how to get the date and time into video.

How to display the Data labels in Chartobject Dynamically?

Hi
i am using Crystal Report Server XI R2 - ReportClientDocument to generate reports dynamically.
i want to display the data labels on the chart object in runtime. how it is possible?
is there any way to achieve this? since it is possible in designer, i hope that there must be WAY.....
Regards,
Padmanaban V

The chart analyzer is a third party tool that Crystal is licensed to use in the designer. That means in the Crystal Designer you have a lot of chart functionality, but at runtime the chart exists as part of the report object and the analyzer is not present. Therefore you have a few formatting options but not as many as in the designer.
For details of what options you have with the chart at runtime, see these links:
[1|http://devlibrary.businessobjects.com/BusinessObjectsXIR2SP2/en/en/CrystalReports_dotNET_SDK/crsdk_net_doc/doc/crsdk_net_doc/html/crlrfCrystalDecisionsCrystalReportsEngineChartObject_MembersTopic.htm]
[2|http://devlibrary.businessobjects.com/BusinessObjectsXIR2SP2/en/en/CrystalReports_dotNET_SDK/crsdk_net_doc/doc/crsdk_net_doc/html/crlrfCrystalDecisionsCrystalReportsEngineChartObject_PropertiesTopic.htm]
[3|http://devlibrary.businessobjects.com/BusinessObjectsXIR2SP2/en/en/CrystalReports_dotNET_SDK/crsdk_net_doc/doc/crsdk_net_doc/html/crlrfCrystalDecisionsCrystalReportsEngineChartObjectClassTopic.htm]
Ludek

How to display the data store in Oracle Spatial?

Hello everyone,
I am totally newbie in Oracle Spatial and to GIS in general. I have started playing around with Oracle Spatial and did an example which is to store a couple of polygons in Oracle and my question is: how to view/display the stored data (in my case the polygons) using Oracle?
Thanks in advance

Latvian83,
thing is, most of the GIS data out there are in SHAPE format so does it make sense to convert [between formats]Depends.
If you're a data producer that wants to ensure a single version of the truth across your company, then maintaining a central repository makes imminent good sense. The alternative would be people working on likely outdated snap-shots of data – stored on their PCs as well as duplicated on file-servers -- bumbling along creating derivatives and passing on the results as if they were valid... Anyhow, spatial analysts would also benefit from a single version of truth.
Data consumers who just want the latest mashups may not want to be bothered with the translation in/out of a database.
Then there’s a grey area with transformations: I've seem instances where it was more expedient to pull data into ArcMap for a massive transformation than performing a similar operation within Oracle.
Regards,
Noel
(I'm sure you've already found it, but you can right-click on a legend entry on ArcMap's Table of Contents and find the Export to ShapeFile option on the context-menu.)

3110 Classic ... How do I display the date a text ...

Similar Messages

Maybe you are looking for