To Display the whole long text on a report display

Hi All,
Pls let me know how can i display the full long text in a column of a report display. I am getting the long text from the function module READ_TEXT.
This is very urgent
Thanx in advance
Suresh

Do you have a fixed column width. If so, do you want to break the text up into lengths of that fixed length.
Example...
<b>Sales Order Item Material Long Text</b>
123456       10    6000000   This is the long
                             text of the material
                             6000000 for the
                             sales order 123456.
Regards,
Rich Heilman

Similar Messages

Display a Long Text in ALV report

Hi,
I want to display the PO header long text in ALV Report that is 255 character width.
Please help me out how to do this.
please it is very urgent
Thanks and regards
Krishna

Use READ_TEXT and concatenate the first lines of the text.
      CALL FUNCTION 'READ_TEXT'
           EXPORTING
                id       = 'F01'
                language = sy-langu
                name     = lv_name " purchase order with leading zeroes
                object   = 'EKKO'
           TABLES
                lines    = t_lines
           EXCEPTIONS
                OTHERS   = 8.
Regards

Problem in printing the notification long text in tocde iw53.

Hi All,
When i try to print the notification long text through tcode "iw53", i get the following message
"The margins of section 1 are set outside the printable area. Do you want to continue?"
and if i give yes then, only the right side of the page gets printed.
This happens only in the Quality and Production system, whereas in development system its working fine, so i think there is no problem with the printer settings.
Do anyone have an idea why this happens only in quality and production system, and what might be the solution to overcome this?
Thanks & Regards,
Haritha.

Hi ,
Please check your settings on machine which is set for printer .
Most printers cannot print all the way to the edge of the paper, because of physical limitations in the way that the printer handles paper.
If you set your document margins or section margins closer to the edge of the paper than your printer is capable of printing
1.Note the section number that is indicated in the error message.
2.On the Edit menu, click Go To.
3.In the Go to what box, click Section.
4.In the Enter section number box, type the number of the section that appeared in the error message, click Go To, and then click Close.
5.On the File menu, click Page Setup.
6.On the Margins tab, click OK. Word displays the following message:
One or more margins are set outside the printable area of the page. Choose the Fix button to have Word set the page margins within the appropriate range.
7.Click Fix. This increases any margin in the nonprintable region to the minimum margin setting.
Note If you are familiar with your printer's nonprintable regions, you can manually increase the Top, Bottom, Left, and Right margins to the minimum that is required.
8.Click OK to close the Page Setup dialog box.
regards
Deepak.

When attempting to open a hyperlink to a PDF file on the web from a Microsoft WORD for Mac 2011 (14.3.9) document, Safari 7.0 instead displays the file as text?

When attempting to open a hyperlink to a PDF file on the web from a Microsoft WORD for Mac 2011 (14.3.9) document, Safari 7.0 instead displays the file as text?

As seen in http://answers.microsoft.com/en-us/mac/forum/macoffice2011-macword/has-the-word- 2011-for-mac-invisible-toolbars/018a3ab6-0570-4ad5-abf8-5b6427fdde3e?msgId=e111b f0a-0e32-4fa3-9536-f349dad8439d
and it worked for me:
1. Quit Word
2. In the Finder's menu bar, select Go > Go to folder and type or paste: ~/Library/Preferences/
3. Click on Go
4. Locate the preference file com.microsoft.Word.plist, then Option-drag it to the desktop to create a backup copy
5. Go to Applications/Utilities and open Terminal
6. Paste the following bold command at the $ prompt (it's a single line):
defaults write com.microsoft.Word 14\\Toolbars\\Show_HIToolbar -boolean TRUE
7. Press Return and then quit with Command Q
8. Start Word and test. If the fix works, trash the backup file in the Desktop file. Otherwise, restore it.
In the original source the author also mentions the change in Word 2008

Some PDF files and other emails do not display the whole page. Is there a way to change that?

Some PDF files and other emails do not display the whole page. Is there a way to change that?

If an app does not behave as expected, try closing the app completely and reboot the iPad. It appears as though you have the original iPad. It helps if you list your iPad model and the iOS that you are running.
Tap the home button once. Then tap the home button twice and the recents tray will appear at the bottom of the screen. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner of the app that you want to close. Tap the home button twice.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

User exit to make the field 'Long text for UD' as mandatory

Hi Gurus,
My requiremen is that while doing UD, I need to make the field 'Long text for UD' as mandatory for the rejected materials
pls suggest.
Thanks
Ganesh

Hi,
U can use the badi ME_PROCESS_PO_CUST methid PO PROCESS_ITEM. In this u have both doc type and line item data and using this u can through the error message to make the field compulsory.u can go to the 'Goto' in menu and in this go to 'Sample code' .Here u will find how to use this badi.

When using quick edit for compressed CSS, edge code does not jump to the particular class but displays the whole thing. This destroys the whole purpose. Does anyone know a fix or extension for that.

When using quick edit for compressed CSS, edge code does not jump to the particular class but displays the whole thing. This destroys the whole purpose. Does anyone know a fix or extension for that.

I suspect that beautify doesn't touch CSS that it is not aware of (e.g. new properties/syntaxes, vendor-prefixes). See if there's a newer version available.
Which compressed CSS are you using? Most CSS libraries come with both compressed and original stylesheets, so use the original one during development/debugging, and switch to the compressed one for deployment.
Randy

The "week" display for Calendar is screwed up. The whole week of days will not display.

The "week" display for Calendar is screwed up. The whole week of days will not display.

Sounds like a different problem but:
Since these threads aren't merged, I'm posting the same in several threads.
I've had the screen blank problem, the sound and copmputer were still on. I took the IMac in twice, got home, still not fixed.
But they used their own keyboard in the shop and couldn't reproduce the problem. I switched keyboards and so far so good. It's been 3 days now.
I'll keep folks updated. Don't get a new graphics card before you try a new keyboard.
Be sure to take the batteries out of your keyboard when testing another one as the board does not turn off if it is like mine.

I have an ipad and a iphone 5, when i start find mi iphone from the ipad or in the iphone only display the iphone, but not mi ipad it displays with conection, ubication not avaliable, i configure the same apple id in bot devices, and a diferent apple id

i have an ipad and a iphone 5, when i start find mi iphone from the ipad or in the iphone only display the iphone, but not mi ipad it displays with conection, ubication not avaliable, i configure the same apple id in bot devices, and a diferent apple id, can help me?

IOS: using facetime http://support.apple.com/kb/ht4319
using an ipad will use the email address since you can't make a phone call. see the link.
Your basically calling/emailing yourself that's why your getting a busy signal.

Tabs created with CMFCTabCtrl::STYLE_3D style didn't display the whole tab labels

Hi,
We use tab controls with multiple tabs created with CMFCTabCtrl::STYLE_3D style, but the tab labels are not displayed completely. For instance, the label should be "Process Control", but the tab header shows only part of it ""Process
C...".
How can I make the whole label being displayed?
Thanks.
MJ

Hi mj118802,
I think this is a by design issue, Form the picture, there is no enough space to show all your tab with the long label text. If you persiste want to use CMFCTabCtrl::STYLE_3D style, you may need to draw your own CMFCTabCtrl.
Please think about to use CMFCTabCtrl::STYLE_3D_SCROLLED style, see the picture.
This is not too bad.
Best regards,
Shu Hu
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Modifying the lengh of a long text field- Crystal Report version 2011

Hello,
I'm having a problem with the long text field in my crystal report.
I'll desribe the problem:
We work with BW version 7.4 sp 5.
I created a BEX Report with an infobject of type Long Text (Long Text is XL).
I know the length of this field is 1,333 char.
When I run the Bex Report the field is displayed correctly (long text).
I then created a Crystal Report 2011 version 14.0.6.1036 RTM based on my BEX Query.
The problem is that the Crystal report brought this database long text field as a
String[70]. Thus I get only the first 70 characters of the field.
Can we modify the settings of the field to enlarge it to be 1,333 characters in
length?
Thank you,
Ayelet

Hi Jothi,
Short Text and Long Text are associated objects of a Characteristic from a BEx query.
The 'Short Text' will not turn to 'Long Text' by setting the 'Can Grow' option.
In Fact, both are completely different objects.
-Abhilash

Error loading file in the operation long text in the General task list

Hi all,
I couldnt upload the detailed check lists in the operations (operation tab) of the general task lists through the long text uplaod via Text->Upload->RTF---> .System is throwing the following Information...
1.Error loading file " specified path with filename.rtf"
Could you please give me any idea to eliminate this.The client is having the detailed check list for each and every operation with safety measures to be taken.
Plz help.
Regards,
Suresh.

Hi all,
It was an authorisation object missing and the problem got solved.
Regards,
Suresh.

How to display the multiple lines text in a single - String, StringBuffer

Hi,
I have a textarea field named Decription which contains more than one line seperated by new line.I need to display those five lines in a single text without breaking. Is it possible? I am getting ArrayIndexOutOfBoundsException while i reached to the end of the line. Plz help me how to align the below code so that i can display the lines as a single line in my excel sheet.
                    if(op.getDescription()!=null)
                        String[] oppDescs = op.getDescription().split("\n");
                        StringBuffer sb = new StringBuffer();
                        for(int i1=0; i<=oppDescs.length-1;++i1)
                            *writeFile(sb.append(oppDescs[i1]), valueWriter);*
                     } else {
                        writeFile(op.getDescription(), valueWriter);
private void writeFile(java.lang.Object value,PrintWriter valueWriter)
        if(value!=null)
            valueWriter.print(value);
    }Thanks and Regards

previous was java1.5
heres a 1.1 - 1.4 version
String[] oppDescs = op.getDescription().split("\n");
StringBuffer sb = new StringBuffer();
for(int i = 0; i < oppDescs.length : i++){
sb.append(oppDescs);
sb.append( '\t' );
writeFile(sb.toString(), valueWriter );Edited by: simon_orange on 31-Oct-2008 13:02

In bookmarks window when i click on choose to find folder to put bookmark into it wont display the whole list

in this version of firefox and the earlier ones when i want to save a bookmark into a certain folder, i do not get the whole folder list so to keep the bookmark i have to save into unsorted folder and then move it to the desired folder...this is not the way it should be
should be click 0n bookmarks, then click on down arrow and the folders should be displayed and choose one and click done....
please fix this

this version of firefox may have been corrupted during an upgrade or something...
i thought it was supposed to be like Internet Explorer where you click on the bookmark index, then select folder where you want bookmark set and then click finish...is this incorrect or right on?
just want to keep it simple...thats all

ALV Classic - How to extract the selection long text of TYPE LVC_T_FCAT?

DATA: e_dyntab_tb TYPE lvc_t_fcat,
          e_dyntab_wa TYPE lvc_s_fcat,
          t_line_reftab   TYPE REF   TO data.
*Populate ALV fiels of TYPE LVC_T_FCAT
MOVE: c_matnr      TO e_dyntab_wa-fieldname.
MOVE: c_material   TO e_dyntab_wa-scrtext_l.
APPEND e_dyntab_wa TO e_dyntab_tb.
LOOP AT t_hwk_date ASSIGNING <fs_hwk_date>. "t_hwk_date is DYNAMIC
    CONCATENATE c_hwk <fs_hwk_date>-index           INTO e_dyntab_wa-fieldname.
    CONCATENATE c_hwk <fs_hwk_date>-calender_wk INTO e_dyntab_wa-scrtext_l.
    APPEND e_dyntab_wa TO e_dyntab_tb.
ENDLOOP.
*Create dynamic itab from dynamic ALV output
CALL METHOD cl_alv_table_create=>create_dynamic_table
    EXPORTING
      it_fieldcatalog = e_dyntab_tb          "Pass alv_fcat here
    IMPORTING
      ep_table        = i_reftab.
* Create Dynamic Work Area and assign to FS
ASSIGN i_reftab->* TO <fs_final_itab>.      "Assigning the Final Table,
CREATE DATA t_line_reftab LIKE LINE OF <fs_final_itab>.
ASSIGN t_line_reftab->* TO <fs_line_reftab>. "Create a Work Area
QUESTION:
e_dyntab_wa-fieldname   = this is the fieldname / column heading for the dynamic internal table
e_dyntab_tb-scrtext_l     = this "should" be the 1st row(Column Heading Title) for the dynamic itab
                                    = this data will be used for MS Excel Functionality as always as the first row as
                                       column heading in the MS Excel
Legend:
How can I extract the entries of e_dyntab_tb-scrtext_l to an internal table containing the same structure of <fs_line_reftab>?

Maybe I missed something, but you already have the long text for the columns in your FCAT structure. The problem you will have is that you will NOT be able to place those fields in the table that you have created because the headings will always be text and the columns may or may not be text (i.e. placing a heading into a numeric). You will be required to use a different structure.
Since you are writing a custom export, you will need to do one of the following:
Option A:
1. Retrieve the layout from the ALV as it will not necessarily be the same as when the original was created. The user may have moved a column or hidden one.
2. Create a structure for the export file that has only text fields. It should contain all of the columns from the FCAT. This can be done by creating another dynamic table and using the original FCAT and current layout.
3. Insert the headings as the first row of the export file.
4. Loop thru the internal table, compare it with the layout, and only insert the requested records into the export file.
5. Export the file.
or Option B:
1. Make sure the internal table has only text fields and insert the headings as the first record.
2. Insert all other records with fields converted to alphanumeric.
3. Use the standard export function.
Hope this helps,
Brian

To Display the whole long text on a report display

Similar Messages

Maybe you are looking for