3D-graph

Hello,
I have some XYZ-data which I want to plot as a 3D-graph. Labview can't seem to do this. For instance I need to put in X and Y-vectors and a 2D-array for Z-coordinates. So if I put in [1 2 3 4] as X and [1 2 3 4] as Y, I need to create a 2D-array for Z of 4x4, that gives a Z-value for every combination of X and Y. But I don't have Z-values for all combinations, I have an irregular shape. Is there another way to display 3D-surfaces in Labview?
Best regards
KF

hi and sorry for hi-jacking this thread,
from my experience those 2d interpolation vi's work best when scaling the input to a range between 0 and 1:
so, this task is feasible;
but I wonder if it was possible to scale the color ramp to a fourth dimension ("the fourth vector should define the colour")?!
Regards,
Alex
♜♖ LabView 8.6 - LabView 2014 ♖♜
Attachments:
Scattered 2D Interpolation_3d.zip ‏51 KB

Similar Messages

Graph is not getting displayed in R12

Hello folks,
Cureently m working on R12 upgrade project.
And we have a report which is working fine 12 but the graphs are not getting displayed as like 11i.
Could you plz any one help how to fix the issue.
Note: There is no error is coming up. But in the graph part , graph is not getting displayed.
Regards,
Krishna

Hello folks,
Cureently m working on R12 upgrade project.
And we have a report which is working fine 12 but the graphs are not getting displayed as like 11i.
Could you plz any one help how to fix the issue.
Note: There is no error is coming up. But in the graph part , graph is not getting displayed.
Regards,
Krishna

How can I display data gathered in a subVI in a graph of the main VI?

I have written a largish application (~50 VI's) which acquires, analyzes, display and saves data from an instrument with a built-in DAQPad. My problem is that my block diagram is rather messy by now. I'm using an event structure in my main VI which reacts to buttons being pressed on the front panel. During data acquisition (one frame of the event structure), I need to do a lot of data processing, and I'm displaying both raw data and analyzed data on the front panel. I'm using a lot of subVI's for this, but I always need to get data out of the subVI's again to display it on the front panel, cluttering my block diagram. It would be much nicer if the subVI could update the main VI's graphs and indicators. I just found two examples with control references which show how a subVI can modify e.g. a 3Dgraph of the main VI, but I'm unable to use this with normal graphs and charts - I can't find a way to update the actual data in the plots (I can scale the plot or color it blue etc - but I really want to change the data it's displaying, not color it blue). Is there anything I'm missing? Is there example code for this kind of problem?
best regards
Martin

im assuming that you want to update your graphs and indicators as you are performing your DAQ, otherwise, you can pass out your value/s when the DAQ completes.
I have attached a very simple example of using a reference to update your front panel graph.
Hope this helps.
Attachments:
Reference Example(LV7.1).zip ‏17 KB

How can I print out the graph I need only, without the controls and indicators?

I'm doing some programming in LABVIEW. I need to print out only the graph, without the buttons, controls, indicators. I tried to look for such a function in LABVIEW, but in vain. How can I achieve the result I expect in my programming?

Hi Fenny,
you should use the report generation functions to create a report containing your graph image and print it.
Take a look at the Sample Test Report.vi you find in the report examples of LV.
Just look at the part of the diagram where it is used Append Control Image to report.vi (in the center of the report functions chain); a graph reference is wired to the Ctrl reference input ( to create a reference of your graph right click on it and select create reference).
Let me know if you need more help,
Alberto

Hiding a hierarchy column in graph view

Hi All,
In an compound layout I would like to have pivot view and bar chart view.
There are two hierarchy columns in criteria. These column should display in pivot view.
My requirement is to hide the hierarchy columns in Bar chart view and can we apply separate selection steps for each view.
Kindly help me..
Thanks,
Haree

Hi,
Edit the pivot table and graph and at the below you can see the selection steps for the individual components. So that you can give separately for each of the components.
Hope this helped/ answered.
Regards
MuRam

Silver graph performance (apparent serious 2011 flaw)

I noticed that cpu usage was quite high for some VIs and ended up finding out with simple comparison benchmarks (using performance and memory test) that a VI with the new silver graph runs about 25 times slower than a vi with the old, uh, modern graph at default graph size. For a graph widened to cover a wide screen, it decreased to about 190 times slower, a horrible crawl. For the test I just generated random numbers put into a 2000 element 1D array to be graphed (couldn't attach the test VIs for some reason).
The silver graph looks nice, but what in the world is going on here?
Jesse

Nice to know
Regards,
Even
Certified LabVIEW Associate Developer
Automated Test Developer
Topro AS
Norway

Regarding graph in obiee 11g

Hi All,
i have some reports that has graph. in that graphs some graph is coming and some is not coming
and giving error shown below.
Graphing engine is not responding.
A fatal error occurred while processing the request. The server responded with: oracle.bi.nanserver.fwk.exception.BISvsException: java.lang.NumberFormatException: For input string: "05:30".
i have checked the services all are up and running.
please help me to solve the problem.

Issue was, Font been defined as 7.5 (may be font size decimal not supported ).the problem solved

Rwbld60.exe error while calling a graph wizard from reports 6i.

Hi,
I have a latest patch 4f installed on my machine for reports 6i. When i call a graph wizard from my reports i am getting a program error saying "rwbld60.exe has generated errors".
How do i confirm that my new patch is installed successfully.
Thanks in adv.
Shailesh

I'm getting this also. I thought it was
due to my use of DATA PARAMETER. I've
logged TARS on this and have yet to hear
back from Oracle.
Maybe if enough of us get the error Oracle
will give some guidance on this one.

Printing problem with PDF graphs from preview

Whenever I print PDF files from preview or from safari, some graphs print incorrectly, although they are displayed correctly on the screen. This only happens with black and white figures and either a negative image with the black and white are reversed is printed or the background of the graphic just prints as a black box. Colour elements are unaffected. This doesn't happen when printing the same files using Adobe Reader or Adobe Professional. Any suggestions for tweaking this, or am I going to have to start using the Adobe plugins instead?

Please try it on Adobe Reader version 10.1.0 , Please note that this forum is for Adobe Reader on android and not for PDF Viewer.
-vaibhav

How to change the text in the legend of a graph programmatically in labview

I have many graphs in one plot and want to show the legend the name of the graph (i.e. the filename). How do I change the text in the legend programmatically?

Create a property node for your graph. Use the property node "Active Plot" to define which plot (or line) you want to rename. Then write the new legend label to the property node "Plot.Name". See attached.
Tim
Attachments:
legend.vi ‏12 KB

Can not edit data labels in old graph chart objects using Word 2010

In Word 2010, Insert object "Microsoft Graph Chart", go to Chart Options and check an item in Data labels, such as "Series Name", "Category Name" or "Value". Click OK, then double-click on a data label to edit its
settings, or right-click on a data label and select "Format Data Labels..."
This makes Word to crash. The only way I can get out of it is by using the Task Manager to kill Word.
This happens in Windows 7 and Windows 8. This does NOT not happen in Word 2007 nor Word 2013, so it seems specific to Word 2010. All our clients have the same problem, this does not seem related to a specific workstation configuration.
The Microsoft Graph Chart are the old charts used within .doc files. I have an application still generating those types of files and need to edit data label settings manually before processing the files with my application.
Also note that anytime you edit a .doc file in Word 2010 and you see "Compatibility Mode" in the title bar, the Insert / Chart option from the ribbon inserts an old type chart (same as if you use Insert / Object / Microsoft Graph Chart), not the
new Word 2010 charts. You then have the same problem editing the data labels.
The underlying Activex seems to be the Chart.Exe file, the one I have installed is 14.0.7012.1000. You can see the version by double-clicking the chart and then look in the Help / About menu.
Any help will be greatly appreciated.

As this is a configuration issue and not a programming issue I' moving your question to a more appropriate forum where you're more likely to find assistance.
Cindy Meister, VSTO/Word MVP,
my blog

How can i select groups of data for show in graphs

Good morning, my problem is that I have made the connection to serial visa in labview, but i dont know how display groups of bits in graph, in serial signal I'm sending four sensors, the signals are in order, first is temperature with a group of 8 bits, then with 8 bits after pressure, etc, the problem is not as multiplex so to speak or determine each data to its respective graphics, I have suggested using counters or bitmask in the data but not how to do it, someone who can help me? annex vi if someone find any errors in logic, thank you!
Attachments:
NILV851ASD1_Sensors.vi ‏39 KB

Hello Mark,
The issue I see is that you're reading all bytes availible at your serial port.
And than you convert them to one single decimal number which you pass on to your 5 controls ( 4 charts and 1 thermomenter like control ).
What you need to do is read your serial output one value at a time, decode it and pass it to the appropriate control.
I'm sending a VI that shows what I mean.
I have assumed that once the connection is established data over the serial port will start with 8 bits of temperature, followed by 8 bits of pressure than 8 bits of humidity and 8 bits of altitude.
And the cycle repeats.
However you should look at any documentation describing any handshaking etc needed for your protocol to work.
The device you're connecting to COM1 needs to know when to start and stop transmitting.
Maciej
Attachments:
NILV851ASD1_Sensors.vi ‏35 KB

How do I display the next segment of an LVM file on a graph?

I have built an application which reads in an LVM file containing 16 waveforms. I am taking 1000 samples at 1kHz. The capture may last for up to 3 minutes, so I generate a sizable file. When I read this file back and display it I only get the first segment of 1000 samples (1 second). Generally this is fine, but I want to be able to select to view the other segments as well. I have been attempting to use the "Read Measurement File" express vi.
I have also tried to put the "Read Measurement File" in a while loop until I hit EOF and tied it to an "Append Signals" express vi before feeding it into the graph. This allowed me to see the last segment of my capture.
I understand that the amount of data I am trying to display would be too much for the graph, but isn't there some way I can point to a segment and display it? The perfect answer would be to grab the timestamps of the segment headers in my file and populate a listbox. (I am generating this file with headers for each segment.) Then I could scroll through the listbox and select the "second" that I want to examine. Then I need the "selected second" to display on the graph. I suspect that this is possible because I am already pulling the waveform names from the file and feeding them into a listbox so I can select which waveform(s) I want to examine.
Any Ideas?
technomage

Hi there,
Have you considered using the TDM file format instead of the LVM format? With TDM you specify parameters for your file and your channels. When you want to read data from the file you can extrac data based on those parameters. So you could construct a search that extracts the data from a particular time, or all the data that was acquired in a 10 minute period for example.
There are a few VIs you would have to become familiar with to do this (the datalog VIs are located in a palette on the File IO palette), but it would probably be easier for you to use these then to construct the file yourself and then program in all the search parameters.
Here are some resources with more information on the TDM format:
TDM Data Format
Introduction to LabVIEW Data Storage VIs
They should help you decide if you would like to use this format or stick with the LVM format.
Sarah
Applications Engineer | National Instruments | UK & Ireland

Error from reports from ZAM(Graph or PDF) - File does not begin with '%PDF-'.

I just noticed today that any Graph or PDF report I try to view I get the
following error - Error from reports from ZAM - File does not begin with
'%PDF-'. I tried to just save the file and then open it, but get the same
error. I can open other pdf files I have downloaded from other sites ok.
Anyone have any idea? I haven't done anything to that server that I am
aware of in quite a while.
Thanks
Bill

I took a closer look at the files it downloaded, opened them with notepad,
haer is what it says:
XSL Transform or subsequent processing failedThe document has no pages.
"Bill" <[email protected]> wrote in message
news:2bBtk.2164$[email protected]..
>I just noticed today that any Graph or PDF report I try to view I get the
>following error - Error from reports from ZAM - File does not begin with
>'%PDF-'. I tried to just save the file and then open it, but get the same
>error. I can open other pdf files I have downloaded from other sites ok.
>Anyone have any idea? I haven't done anything to that server that I am
>aware of in quite a while.
>
> Thanks
>
> Bill
>

Graph in rtf template

Dear All
I need to insert a graph in report through XML in RTF template. i am not able insert the multiple values in BI Publisher.
when i try to insert the 2nd value it is getting replaced with the 1st value. Kindly assist me.
Regards
Shaizy
Edited by: user11298424 on Sep 16, 2012 4:18 AM

Are you tring to create two graphs in a single page or multiple pages? Not exactly clear what you are trying to do.
Send me your XML structure and the exact requirement so that I can help you
Rgds
Chundi

Chinese can not be displayed in the graph report

I create a report using Graph Wizard , the graph contains Chinese. the report on my windows client runs ok, but on the linux server ,the Chinese in the graph could not be displayed,shows some boxes, but the paper layout shows Chinese normal.

Can anyone help me ? Or have anyone to tell me how the report generated graphics.

3D-graph

Similar Messages

Maybe you are looking for