3dMark05 Score - please post

Post your 3dMark05 score in this tread and please include your computer spesifications!

Quote
Originally posted by cool'n'quiet
Grommit,
You still haven't even remotely explained why the 9600XT should score far better than the 5950U
Correct.  Instead, I pointed out some supporting evidence for 3dmarks "accuracy".
I posted the shadermark results to point out the relative performance of a 9800XT vs a 5950U - and how it corresponds to performance under 3dmark05.  Shadermark shows the 9800XT with 70% better performance than a 5950U - which matches the gap in 3dmark05.  Therefore it's reasonable to assume that the 9600XT's 3dmark05 score is in  line with what's being tested.
Quote
but if the benchmark doesn't reflect any game, what point is the benchmark?
Right - I know of no available game that runs 70% faster on a 9800XT than a 5950U.    However, I'm sure you can read futuremarks marketing claims without needing me to reiterate them.
IMO, the free edition is good for making sure your system setup performs in line with similar setups.  As a synthetic benchmark, the Pro version looks very useful for reviewers trying to identify strengths and weaknesses of cards.
I do find it amusing that despite your own reservations, you went to the trouble of trying it under three different driver revisions  
BTW, the shader model discussion was meant to illustrate why ATI and Nvidia cards should NOT be compared using 3dmark05.  And for your reference, I suggest you check out the 3dmark white paper.
[edit] Here are some 9600XT shadermark results to chew on.

Similar Messages

  • 3Dmark scores please post

    Please Post 3dmark2001/2003 scores if you have them.  Im trying to get a sence of where the rig im working on places.
    K8V deluxe
    Athlon 64 (3200+) 2Ghz
    2@512meg Mushkin black high perf 2-2-2
    ATI 9800Pro 256meg
    Antec 550TP PSU
    Antec Sonata case
    As of now the rig is running 3Dmark2001 at 19,577
    And 5,832 in 3Dmark2003
    In my opinion the rig is not running what it should be.  I know its not A MSI board but they wanted an asus board for some strange reason    I just need some info on the 64s performance by users not reviews, thanks

    No I didn't have dynamic overclocking on. Will re-run the test with it enabled.
    Update: Ok, just re-ran on my home PC with dynamic overclocking enabled.
    Result was a slight improvement of 6480. Test breakdown
    Game Tests
     GT1  Wings of Fury         : 213.4 fps
     GT2  Battle of Proxycon  : 45.6 fps
     GT3 Trolls Lair               : 38.8 fps
     GT4 Mother Nature         :36.5 fps
    CPU Tests
     Test 1 : 82.7fps
     Test 2 : 10.9 fps
    Feature Tests
     Fill Rate Single   : 1846.2 Mtexels
     Fill rate Multi      : 2850.1 Mtexels
     Vertex Shader   : 20.0 fps
     Pixel Shader 2.0: 52.8 fps
     RagTroll            : 29.0
    Sound Tests
     No sounds  : 51.0 fps
     24 sounds  : 39.6 fps
     60 sounds  : N/A
    Out of interest I also ran it on my work pc, whose specs are
    P4 800FSB  2.8Ghz
    ASUS P4P800 m/b
    1Gb Ram
    ATI 9600 (catalyst 3.9)
    WinXP Pro SP1
    On Board Sound codec
    3DMark03 (build 340) : 3315
    Game Tests
     GT1  Wings of Fury         : 128.5fps
     GT2  Battle of Proxycon  : 20.5.fps
     GT3 Trolls Lair               : 18.8 fps
     GT4 Mother Nature         :19.5 fps
    CPU Tests
     Test 1 : 60.9fps
     Test 2 : 10.6 fps
    Feature Tests
     Fill Rate Single   : 855.0 Mtexels
     Fill rate Multi      : 1528.9 Mtexels
     Vertex Shader   : 10.4 fps
     Pixel Shader 2.0: 29.0 fps
    Sound Tests
     No sounds  : 55.6 fps
     24 sounds  : 47.2fps
     60 sounds  : N/A
    I'm surpised the score dropped that much considering the rest of the h/w is comparable with my home unit. Whats also interesting is that the sound test on my work machine have better scores than my home PC. I suppose this shows that the audio codec on the P4P800 is better than the Realtek on the K8T NEO, or the drivers are better. A bit surprising all the same.
    Craig

  • 3dmark05 score too low!!!

    my 3dmark05 score is too low. i have a msi 9800 pro(green pcb version.) and i only got 1200 points please help. Also i used to get 6400 points in 3dmark03 but they also dropped to 5000. I also installed the latest chipset drivers and also have catalyst 4.9. I dont know what to do next. I have windows xp with sp2 and my sig is given below.
    Please do reply urgently......

    Also, can overclock your computer:
    Video Card
    To overclock video card, we need a third party utility to overclock the card. Although increasing numbers of manufacturers include utilities to allow customers to overclock their cards in their drivers or through an extra application, most of them do not provide this facility. Simply because overclocking stresses the system and voids manufacturer warranties. Third party utilities tend to be universal that they work on different cards irrespective of manufacturers.
    Some utilities and the places to download included:
    1. OMEGA Drivers
    http://www.omegacorner.com/
    2. StarStorm Drivers (Nvidia cards only)
    http://downloads.guru3d.com/download.php?id=10
    3. RivaTuner
    http://www.guru3d.com/
    4. PowerStrip
    http://www.entechtaiwan.com/
    5. Rage3D Tweak (ATI cards only)
    http://www.rage3d.com/index.php?node=r3dtweak
    6. RadLinker (ATI cards only)
    http://www28.brinkster.com/chrisww1942/
    7. ATITool (ATI cards only)
    http://atitool.ocfaq.com/
    Please read their own manuals in their corresponding web pages. Also, if you want to be able to have the hidden functions in Nvidia card, create a file with notepad and put this in it (thanks for Deathstalker to provide this source):
    Windows Registry Editor Version 5.00
    [HKEY_LOCAL_MACHINE\SOFTWARE\NVIDIA Corporation\Global\NVTweak]
    "Coolbits"=dword:ffffffff
    "NvCplEnableHardwarePage"=dword:00000001
    "NvCplEnableAGPSettingsPage"=dword:00000001
    Save it as agpsetting.reg to your desktop or anywhere you like. Then run it and it will give you all the hidden options from Nvidia which include extra resolution settings for your desktop and overclocking for both the memory and core.
    For ATI Radeon X800 Pro softmod, please read (link provided by mopey):
    http://www.ocforums.com/showindex.php?t=312063
    For ATI Radeon X800 Pro voltage mod, please read (link provided by NovJoe):
    http://www.vr-zone.com.sg/?i=817&s=1
    For ATI Radeon 9800 XT voltage mod, please read (link provided by NovJoe):
    http://www.vr-zone.com.sg/?i=760&s=1
    To can change your Radeon 9800 Pro 256MB graphic card to Radeon 9800XT card, please read (in English):
    http://www.rojakpot.com/(jiljtv55hwgq5ua...&var1=92&var2=0
    To change your GeForceFX 5900 graphic card to GeForceFX 5900 Ultra, please read (in Traditional Chinese):
    http://www.oc.com.tw/article/0403/readocarticle.asp?id=2410
    To change your GeForceFX 5700 Ultra graphic card to QuadroFX 1100, please read (in Traditional Chinese):
    http://www.oc.com.tw/article/0403/readiyarticle.asp?id=2387

  • HP LaserJet 1022 Printing Problems - Please Post Here

    Sorry, I hate to create a new thread, but tracking so many different threads on this one issue is becoming problematic for me. So with that being said, if you are still having a problem with printing to a LaserJet 1022 after the full uninstall I detailed in the FAQ thread followed by installing version 2.2 of the HP driver package, then let me know here. And specifically I want to know is which device you have, how your device is connected, the print driver version, and what apps are giving you problems. In my own personal testing, here is what I have found:
    USB direct connect - OK, I have yet to run into a problem here.
    USB connected to an Airport Extreme N - OK, I have yet to run into a problem here.
    USB connected to an Airport Express G - Paused problem. I got print job/page out and then the printer paused and would not resume. I don't have a functioning work around here yet, but I'm trying.
    So if I were going to fill out my own form, it would look like this:
    Printer: LaserJet 1022n
    Connection: USB connected to an Airport Express G (Firmware version 6.3)
    Driver Version: 1.1.0.182
    Apps: All
    Problem Description: Printer queue goes into a Paused mode and won't resume
    And to get you started, I have left a blank template at the end of this post.
    Also please make sure to include whether you have the 1022, 1022n, or 1022nw AND how it is connected to your Mac. If users of the 1020, what to chime in on this thread that is OK. Anyone else, please post in the FAQ thread or a different device specific thread. As the 1022 seems to be the most problematic at the moment, I'd like to track this down as quickly as possible.
    Just trying to help.
    Andrew
    =====
    Printer:
    Connection:
    Driver Version:
    Apps:
    Problem Description:

    Printer: LaserJet 1022
    Connection: USB connected to an Airport Express N (latest firmware, etc)
    Driver Version: 1.1.0.182
    Apps: All
    Problem Description: Can sometimes print a single page but then all status lights flash on printer and I have to turn the printer off - other times, nothing happens (printer pauses and will not resume). Have tried connecting via Bonjour and IP address but same problem occurs.

  • Please post the ISO at the same time you post the fast track

    Dear Microsoft,
    Please post the ISO at the same time you post the fast track.  Your update downloads do not always go as planned (you upgrade the whole works, instead of just what changed) and it becomes necessary to wipe and reinstall with the current ISO.  Starting
    with a defunct ISO and then going through the various hoops to get to the current version is a several day job, not to mention that the same mechanism that caused an update to crash also will occur.
    And post it to a web site with a complete list of the various revisions.  List them one on top of another.  Do not have a separate web page with each new preview that has to be Googled to find.  Let us see them all in one place.
    Many thanks,
    -T

    TAM2
    Suggest you use the built in feedback tool.  That is the only way to contact those who are actually working on the OS.
    Wanikiya and Dyami--Team Zigzag
    Directions?
          --->
    How to Send Feedback to Microsoft in the Windows 10 Technical Preview
    Carey Frisch
    Thank you.  Right under my nose!
    And they are not letting me use the tool unless I have one of their idiot account.  Not going to happen.

  • Mac mini Core Duo as HTPC...please post links.

    Pretty self explanatory.
    Thanks in advance,
    SX

    My apologies for not being clear, I guess. I simply wanted people to post links that expand on this issue, as well as any other relevant info.
    -If you use your mini as a Home Theatre PC (HTPC), then please discuss which components you have.
    -If you have articles about using the mini as a HTPC, then please post any links.
    -If you are an audio/visual expert that can write a few words of advice for a novice like me, then please post your thoughts.
    -Ya feel me now?
    : )

  • Can someone please post the password for the following HP Mini 110

      Customer brought in laptop and did remember the bios password.
    We tried the suggested download win32 to submit the halt code and it did not work on xp or win7 in compatibility mode.     Can someone please post the password for the following HP Mini 110. 
        Halt code = CNU937BF2X
    thanks  Andy  Mountain Computers Inc.

    Hi,
    Try:
    e9lofxp874
    e9lofxp87r

  • Please post the password for the following HP Mini 110

      Customer brought in laptop and did remember the bios password.
    We tried the suggested download win32 to submit the halt code and it did not work on xp or win7 in compatibility mode.     Can someone please post the password for the following HP Mini 110. 
        Halt code = CNU937BF2X
         thanks  Andy  Mountain Computers Inc.

    Try
    e9lofxp874
    or
    e9lofxp87r
    Wish you luck,
    Karthik
    --Say "Thanks" by clicking the Kudos (purple thumbs up icon in the lower right corner of a post)
    --Please mark the post that solves your problem as "Accepted Solution"

  • Someone PLEASE post the 4S GSM unlocking procedure

    I've been on the phone for hours with global support.  Everyone says something different.  1 person said I need iTunes.  I didn't have iTunes so I hung up to download and install it.  I call back after and no one know what that person was talking about.  This person also told me if the unlocked worked I wouldn't see the Verizon logo in the top left anymore, I still see it on mine
    So can someone PLEASE post the procedure and tell me if there is a way I can verify the unlock worked when I'm still in the US.  Am I supposed to see ANYTHING when I insert a SIM from another country?  Because I'm not seeing anything
    Oh also, after the unlock works.  How do I switch it from CDMA to GSM only mode so I don't end up roaming on CDMA when I'm overseas
    Thanks

    Look for this post.. 
    Verizon iPhone 4S SIM UNLOCK Tutorial 
    Explains everything. 

  • Can someone please post a working bcdedit /enum ALL /v

    I've been attempting to pull off the elusive triple boot and screwed up the BCD on my Windows 8.1 install.  I can't seem to mount the EFI partition in the recovery console, so I can't perform any of the bcd*.exe fixes.  I'm going to need to fix this offline.  My strategy is to mount the EFI partition in OSX, copy the BCD file to a flash drive, modify it from Windows recovery console, boot back into OSX, replace the original, reboot, cross fingers, repeat.
    Can someone please post the output of the following command in Windows?
    bcdedit /enum ALL /v

    Alternatively, can someone please grab their bcd file and share it?  I'm kind of in a jam here.  From the Mac side, you can do this:
    sudo mkdir /Volumes/efi
    sudo mount -t msdos /dev/disk0s1 /Volumes/efi
    BCD file is in or around /Volumes/efi/EFI/Microsoft
    I'm mostly concerned with the device and osdevice entries, as mine are showing up as 'Unknown'.

  • Help other users ! Proper 8GB use @ P55-MSI Motherboards/please post typ of RAM

    Hi@all
    Proper function with 8GB on MSI-P55
    Please post your RAM typ, Mainboard with CPUZ
    For example :
    Sorry,example shows only 4GB,please post of course your 8GB config  .
    Please post any links from shops etc for agreement .
    For example :
    http://geizhals.at/deutschland/a456514.html
    Any remarks what you change in Cell Menue ?
    RAM-Voltage... ?
    So we can help international users to buy the correctly RAM and have fun with 8GB
    thanks
    greetings

    http://www.newegg.com/Product/Product.aspx?Item=N82E16820146871

  • Please post here the solution to update 10.4.6

    I also have had troubles with this update. It would not install so I shut down and tried to this morning. It continued to stay on the gray screen with the loading wheel. I left it there loading when I left the house because it didn't finish. I am thinking of running Disk Utility when I get back home.
    The reason for this post is I have been looking on the forums to many posts about this and I am getting lost on the exact way about going about getting this installer to work and everything to run smooth. If you have gotten it to work correctly or know a way to run it correctly please post here what you did. It would be the greatest help and would be greatly appreciated. Thank you for your help!
    -Kyle

    This really isn't going to be much help for you, Kyle, because all I did was Click Software Update and hit install. That's pretty much all I ever do. I do have a cloned backup so restoration is trivial perhaps explaining the casual approach but that said, never had to restore either.

  • If you receive the HTC Droid Incredible Froyo update, please post here.

    It is August 18th and we all know the rumors said we would get Froyo today on our  Incredibles. If you receive the HTC Droid Incredible Froyo update, please post here so those of us waiting will know that the update is starting to download. It should be downloading by batches of phones. Once we know it has started, at least we'll all know it's then just going to be a short time until we are in an update batch.

    My wife had the update waiting when she checked her phone at 9am this morning, I'm still waiting.
    She's got a 917 area code and I'm 646.  Her phone's paid by a corporate account while mine is tied to a different larger corporate account, but it is my personal phone that I pay for. 
    I've got my phone about a month before her and have been a longer VZW customer, so no idea what the distribution order is. 

  • Would Someone Please Post the Official Vista CD ON File Fr

    Would someone please post this on filefront so I can get it Please Thanks Regards WesMessage Edited by mickey3390 on 06-8-200703:8 PM

    :smileyvery-happy:Thanks again to you and all involved. Have you installed it yet and if so what were your results? I'll post my results tomorrow. Thanks again!!!!:smileyvery-happy:Message Edited by mickey3390 on 06-8-200704:3 PM

  • TO ALL 7690m XT LAPTOP USERS - PLEASE POST TO SHOW HP WE WANT A REPLACEMENT OR REFUND

    Hello,  I am starting this thread to show HP that we HP customers did not spend $1000+ for a giant paper weight.  I purchased my HP Dv7t on Feb 6, contacted HP by Feb 9 to complain of graphics issues.  I was told that there is nothing HP can do till a newer graphics driver came out (which never came as we were promised).  I purchased this computer for one reason; to play games.  In the past 3 months it has been collecting dust, while I use my older laptop to play games on the lowest possible setting waiting impatiently for the new updates.
    The issue is HP's most recent Dv7t Quad laptops were being sold with a 7690mXT graphics card which is known as a gaming card.  HP also markets it as a gaming PC.  Yet I am unable to play Star wars the old republic, Mass Effect 3, and Battlefield 3.  The games just crash.  HP told us back in Feb that in a month a newer driver would come out, never did.  Other issues are over heating, GPU throttling down fps on movies and games, and random crashes.
    I read on formus today that HP achnowledges this issue and is now only replacing your Dv7t with their brand new option with the Nvidia GPU if you purchased your laptop within 21 days.  I feel as a loyal HP customer, with a faulty $1300 laptop withing its warranty, only purchased less then 3 months ago, reporting issues 3 days after receiving it, the fact HP cant solve their issues, deceived in purchasing a faulty laptop design, advertised as a gaming laptop, the fact I have helped more HP Customers on their forums then their own tech support, that we and I deserve a refund, or a replacement, so we may finally utilize our computers.  I have owned 5 computers in my life, never had an issue like this before, so [legal discussion:removed] they better do the RIGHT THING and give us our replacements. 
    Please post your issues so HP can see we were tricked into purchasing a faulty computer.
    Thanks.

    Kudos to all the gamers and other notebook savvy users for their posts about the 7690M and 7690M XT. In February, I purchased a dvt6 i7 quad core with 2 gb of Radeon 7690 m XT. I chose this notebook after reading about it on various forums where gamers mostly post. Not knowing much about computers it seemed the gamers knew a lot. I wanted a really nice laptop. with good graphics. I love visual arts and product design. I was thrilled to order this notebook and was assured by the HP sales staff that I was making a wonderful choice with the dvt6.. I got the 7200 hybrid drive and the 1080p display and looked forward to fast performance and visual wow. Because of the cost, over $1000, it was important to me the notebook stay in stride with future technical advancements for  the next two to three years., at least.
    I felt aggrieved when HP walked away leaving me alone with the 7690M XT. During the 21day return policy I hammered at testing the components. Lacking many computer skills,little did I know I had been I thrown into a radeon/ intel marriage, dysfunctional. at its quad core. Intuitively something about how the graphics worked seemed off. Calling tech support confused me more. Tech after tech told me I did not have an intel display adapter. I did not have switchable graphics. "Your order form only lists the Radeon card.!." I went back and forth with different techs with different takes. I imagined the techs were right , despite tne fact the device manager had two adapters, the order form trumped all.. One night I had this dream.
    Intel: " Honey, call the driver we need to take Crysis to school."
    Radeon: "Yes dear, but the AMD agency fails to update his license.".
    Intel: "That's it, I will take Crysis since all you do is look good and make promises you pretend to keep." "Why didnt you call for a new driver?"
    Radeon: "Call? When? All you do is takeover and run everything?" (Radeon huffs,turns red,and leaves.)
    Inel: " Oh,not another black out, I am leaving you for Nvidia !"
    I know very little about how a computer works I made repeated calls to tech support and was led down one dark alley after another. I have spent twenty+ collective hours with support. Reputably, I was told that I did not have an intel display adapter or switchable graphics: only the AMD 7690M XT. Last week my HP case manager mailed me an email with downloads to fix my graphics with updates from July 2011. Strange. I will have to investigate these updates as it seems I already have more current updates. The case manger insisted I do the downloads to see if my games play. The only other alternative he offered was to send my laptop in for repairs. I emphatically told him there were no repairs for the graphic problems because HP does not have a proper driver for the 7690M XT.
    [Legal Discussion Removed per Community Guidelines]
     

Maybe you are looking for