4.0 EA2 Commit in subversion gives error due to missing parent entry
Hello,
I am using Data Modeler 4.0 EA2 with SVN.
In the following scenario an error occurs when committing the change in SVN:
1- open a model in DM
2- add a physical model to the relational model
3- save the model
4- commit the changes in SVN
The following error is displayed in a popup window:
svn:E200009: Commit failed (details follow):
svn:E200009: '<path>\rel\<ID>\phys\<ID>\Table\seg_0' is not known to exist in the repository and is not part of the commit, yet its child
'<path>\rel\<ID>\phys\<ID>\Table\seg_0'\<ID>.xml' is part of the commit.
Joop
Modeler does not handle corectly directory additions (when segment is added new directories are created).
Is it for DM 4 or it's for previous releases?
Philip
Similar Messages
-
Hello Experts,
We have an issue with the Object Cash Flow makes postings while the Partner.Rel. Cash Flow gives an error due to missing House Bank in the Posting Parameters on the contract.
Result is an double/tripple etc. booking on the Object Cash Flow which not is showing on the Flow Overview in the contract and no booking on the Partner.Rel. Cash Flow.
This goes on until the missing House Bank is corrected.
We want to know if we can block the Object Cash Flow making definitive postings until the original Partner.Rel. Cash Flow is posted.
Hope to hear from you, thanks in advance!
Saskia IsmailHi.Saskia Ismail
You can think the 2-Type of posting procedure.
1. You just only manage 'Partner.Rel. Cash flow' of each condition & flow type.
In this cases, you do not configure "Distribution Formula" on the "Condition type" configuration.
(RECACUST>Conditions and Flows>Condition Types and Condition Groups)
2. You want to manage both of 'Partner.Rel. Cash flow' and 'Object Cash Flow'. but when you posting this cash flow, if you want to block the Object
Cash Flow making, you can use 'Enhancements' of the 'RECACUST>Accounting>Automatically Generated Accounting
Documents>Enhancements>Prevent Object Transfers' as below.
Prevent Object Transfers :
- You can use this BAdI if you want to suppress object transfers (transfer from the contract to assigned rental objects) during periodic posting.
- Implement the method SUPPRESS_TRANSFER_POSTING and set the parameter cf_suppress_transfer there to 'X'.
Regards,
Yeong Chul, Jeong -
On some sites we get sec_error_unknown_issuer SSL error due to missing root certificate TC TrustCenter Class 2 L1 CA XI. Firefox is the only browser having this issue. Why is that certificate not preinstalled and shipped with Firefox?
Check sales.sauer-danfoss.com for details with Firefox 7.
Thanks
StefanYou are not sending the TC TrustCenter Class 2 L1 CA XI intermediate certificate
*http://sales.sauer-danfoss.com/
Web servers need to send all required intermediate certificates to build the chain to build-in root certificates.
You need to install that intermediate certificate on your server.
*http://www.trustcenter.de/en/infocenter/root_certificates.htm#3479
You can test the certificate chain via a site like this:
*http://www.networking4all.com/en/support/tools/site+check/ -
Impdp triggers always give error ORA-04071:missing BEFORE, AFTER or INSTEAD
Hello,
I am using 11g impdp to create a test system.
I use this cmd to import
impdp 'SYS/xxxxx@PWRFUN AS SYSDBA' dumpfile=PWRPROD.DMP logfile=PWRFUNimportPROD.log SCHEMAS=pwrplant TABLE_EXISTS_ACTION=REPLACE
Then I get this error for all the triggers
ORA-39083: Object type TRIGGER failed to create with error:
ORA-04071: missing BEFORE, AFTER or INSTEAD OF keyword
Failing sql is:
CREATE TRIGGER "PWRPLANT"."APPROVAL_STEPS_HISTORY" PS_HISTORY
BEFORE UPDATE OR INSERT ON PWRPLANT.APPROVAL_STEPS_HISTORY
FOR EACH ROW
BEGIN :new.user_id := USER; :new.time_stamp := SYSDATE; END;
As you can see, the trigger does contain the word "before".
When I remove " "PWRPLANT"."APPROVAL_STEPS_HISTORY" " and run the trigger below, it compiles correctly. Why is this, and how do I make my impdp to run correctly?
CREATE TRIGGER PS_HISTORY
BEFORE UPDATE OR INSERT ON PWRPLANT.APPROVAL_STEPS_HISTORY
FOR EACH ROW
BEGIN :new.user_id := USER; :new.time_stamp := SYSDATE; END;same error, thanks for your attemp
Error starting at line 1 in command:
CREATE TRIGGER "PWRPLANT"."APPROVAL_STEPS_HISTORY" PS_HISTORY
BEFORE UPDATE OR INSERT ON PWRPLANT.APPROVAL_STEPS_HISTORY
REFERENCING new AS new
FOR EACH ROW
BEGIN :new.user_id := USER; :new.time_stamp := SYSDATE; END;
Error report:
ORA-04071: missing BEFORE, AFTER or INSTEAD OF keyword
04071. 00000 - "missing BEFORE, AFTER or INSTEAD OF keyword"
*Cause: The trigger statement is missing the BEFORE/AFTER/INSTEAD OF clause.
*Action: Specify either BEFORE, AFTER or INSTEAD OF. -
1. Product Name and Number
Compaq Presario CQ56
2. Operating System installed (if applicable)
Windows 7
3. Error message (if any)
from error log:
Hard Disk (result-failed) id# UAMBXQ-5H06AK-XD003F-618U03 HARD DISK 1
Start-up (result-failed) id# UAMBXQ-5H60AK-XD003F-40G403 MEMORY MODULE 2
4. Any changes made to your system before the issue occurred
There were no changes made to the computer, prior to the restore the computer would boot up, however, it would freeze after the system was up and running. Restarting the computer did not help and when I tried to restore it to an earlier point it said that it was unable to complete the restore. I then tried to the factory reset, however, it gave me an error message: "Recovery Manager could not restore your computer using the factory image. Please contact HP support. Error code: 0xe0ef0003. When I tried to restart the computer afterwards, it gave an error message: "BOOTMGR is missing, Press Ctrl+Alt+Del to restart". How do I fix this?
This question was solved.
View Solution.Hello crossurmind.
What sorts of issues led up to the computer originally not booting? Were you getting a lot of blue screen errors?
The two items you posted from the error log seem to indicate that it is having trouble reading the hard drive and possibly the memory. After trying the restore it seems that it failed causing the boot section of the install to "not be found."
I think you should begin by using the built in tests for the hard drive and memory located in the BIOS. Follow this document to perform the hard drive test. All you'll have to do is repeat the process and select "memory" in order to perform the memory test. Make sure to post the result of both of these tests.
I will await the results; have a great day!
Please click the white star under my name to give me Kudos as a way to say "Thanks!"
Click the "Accept as Solution" button if I resolve your issue. -
Dealing with errors due to newly added/dropped columns
DB version:11g
I am not sure if i have created an unnecessarily large post to explain a simple issue. Anway, here it is.
I have been asked to code a package for Archiving .
We'll have two schemas;The original schema and an Archive schema (connected via a DB Link)
ORIGINAL Schema -------------------------> ARCHIVE Schema
via DB Link When records of certain tables in the ORIGINAL schema meet the archiving criteria (based on Number of Days Old, Status Code etc), it will be moved ('archived') to the ARCHIVE schema using the INSERT syntax
insert into arch_original@dblink
col1,
col2,
col3,
select col1,
col2,
col3,
from original_tableThe original table and its archive table has the same structure, except that the Archive table has an additional column called archived_date which just records when a record got archived.
create table original
col1 varchar2(33),
col2 varchar2(35),
empid number
create table arch_original
col1 varchar2(33),
col2 varchar2(35),
empid number,
archived_date date default sysdate not null
);We have tables with lots of columns(there are lots of tables with more than 100 columns) and when all column names are explicitly listed like the above syntax, the code becomes huge.
Alternative Syntax:
So i thougt of using the syntax
insert into arch_original select original.*,sysdate from original; -- sysdate will populate archived_date columnEventhough the code looks simple and short, i've noticed a drawback to this approach.
Drawback:
For the next release, if developers decide to add/drop a column in the ORIGINAL table in the Original Schema, that change should be reflected in the archive_table's (ARCHIVE schema) DDL script as well. It is practically impossible to keep track of all these changes during the development phase.
If i use
insert into arch_original select original.*,sysdate from original; syntax, you will realise that there is change in the table structure only when you encounter an error(due to missing/new column) in the Runtime. But, if you have all the column names listed explicitly like
insert into arch_original@dblink
(col1,
col2,
col3,
select col1,
col2,
col3,
from original_tablethen you'll encounter this error during the Compilation itself. I prefer the error due to a missing/new column during the Compilation itself rather than in Runtime.
So what do you guys think? I shouldn't go for
insert into arch_original select original.*,sysdate from original; syntax because of the above Drawback. Right?What advantage would it bring if i make ARCHIVED_DATE as the first column in the ARCHIVE tables?The advantage is that if you'll add a column in the future on both original and archived tables the insert statement will work anyway...
SQL> create table x (a number, b number);
Table created.
SQL> create table y (arc_date date, a number, b number);
Table created.
SQL> insert into x values (1,1);
1 row created.
SQL> insert into x values (2,2);
1 row created.
SQL> select * from x;
A B
1 1
2 2
SQL> insert into y select sysdate, x.* from x;
2 rows created.
SQL> alter table x add (c number);
Table altered.
SQL> alter table y add (c number);
Table altered.
SQL> alter table x drop column b;
Table altered.
SQL> alter table y drop column b;
Table altered.
SQL> insert into x values (3,3);
1 row created.
SQL> insert into y select sysdate, x.* from x
2 where a=3;
1 row created.
SQL> select * from x;
A C
1
2
3 3
SQL> select * from y;
ARC_DATE A C
25-JAN-10 1
25-JAN-10 2
25-JAN-10 3 3Max
[My Italian Oracle blog|http://oracleitalia.wordpress.com/2010/01/23/la-forza-del-foglio-di-calcolo-in-una-query-la-clausola-model/]
Edited by: Massimo Ruocchio on Jan 25, 2010 12:44 PM
Added more explicative example -
Sampsperchantoacquire =1 gives error -200077
using either DAQmxCfgSampClkTiming or DAQmxCfgImplicitTiming and setting SampsPerChantoAcquire to 1 gives error code -200077
I want to sample 6 channels exactly once as fast as possible - how should I do this?
Thanks!Hello Britt,
You can use the basic structure of OneSample as a guideline and simply add on however many more channels you require (in this case 5 more). You would do this using the DAQmxCreateAIVoltageChan() function. The NI-DAQmx C Reference Help describes this function as follows:
DAQmxCreateAIVoltageChan
int32 DAQmxCreateAIVoltageChan (TaskHandle taskHandle, const
char physicalChannel[], const char nameToAssignToChannel[], int32
terminalConfig, float64 minVal, float64 maxVal, int32 units, const char
customScaleName[]);
Purpose
Creates channel(s) to measure voltage and adds the channel(s) to the task
you specify with taskHandle. If your measurement requires the
use of internal excitation or you need the voltage to be scaled by excitation,
call DAQmxCreateAIVoltageChanWithExcit.
You would simply call this function with the same taskHandle you are already using and list whatever channels you want as the physicalChannel[] input parameter. Also, as noted in the NI-DAQmx Help, the physical channel syntax can be used for a single channel or a range of channels. As described in this manual:
Physical Channel Syntax
<script type="text/javascript">
</script>
Use this syntax to refer to physical channels and groups of
physical channels in NI-DAQmx.
Physical Channel Names
Physical channel names consist of a device identifier and a slash
(/) followed by a channel identifier. For example, if the physical channel is
Dev0/ai1, the device identifier is Dev0, and the channel identifier is ai1. MAX assigns device identifiers to devices in the
order they are installed in the system, such as Dev0 and Dev1. You also can
assign arbitrary device identifiers with MAX.
For analog I/O and counter I/O, channel identifiers combine the
type of the channel, such as analog input (ai), analog output (ao), and counter
(ctr), with a channel number such as the following:
ai1
ctr0
For digital I/O, channel identifiers specify a port, which
includes all lines within a port:
port0
Or, the channel identifier can specify a line within a port:
port0/line1
All lines have a unique identifier. Therefore, you can use lines
without specifying which port they belong to. For example, line31—is equivalent to port3/line7 on a device with four 8-bit ports.
Physical Channel Ranges
To specify a range of physical channels, use a colon between two
channel numbers or two physical channel names:
Dev0/ai0:4
For digital I/O, you can specify a range of ports with a colon
between two port numbers:
Dev0/port0:1
You also can specify a range of lines:
Dev0/port0/line0:4
Dev0/line0:31
You can specify channel ranges in reverse order:
Dev0/ai4:0
Dev0/port1/line3:0
Physical Channel Lists
Use commas to separate physical channel names and ranges in a list
as follows:
Dev0/ai0, Dev0/ai3:6
Dev0/port0, Dev0/port1/line0:2
The implementation in which you specify 2 samples per channel in DAQmxCfgSampleClkTiming is probably not the best implementation. If you continue to specify 2 samples to read and then only pull 1 sample from the buffer in DAQmxReadAnalogF64 you will eventually overflow the buffer on the device. Also, you will not "lose" data, but I don't think you are getting the data you expect. The DAQmxReadAnalogF64 function will read the oldest available sample from the device; this isn't a problem when you are reading all the data that is in the buffer every time. However, in your implementation, you will be getting old data when you expect more recent. The figure below should demonstrate the problem with this scheme. The arrows represent the data that you are reading with the DAQmxReadAnalogF64.
This behavior is the default setting for the NI-DAQmx driver, but you can change it using the RelativeTo property. The description of this property is as follows:
RelativeTo
Data Type:
int32
Description:
Specifies the point in the buffer at which to begin a read operation. If you
also specify an offset with Offset, the read
operation begins at that offset relative to the point you select with this
property. The default value is DAQmx_Val_CurrReadPos unless you configure a Reference Trigger for the task. If you configure a Reference Trigger, the default
value is DAQmx_Val_FirstPretrigSamp.
Valid values
DAQmx_Val_FirstSample
10424
Start reading samples relative to the first sample
acquired.
DAQmx_Val_CurrReadPos
10425
Start reading samples relative to the last sample returned by
the previous read. For the first read operation, this position is the first
sample acquired or the first pretrigger sample if you configured a reference
trigger for the task.
DAQmx_Val_RefTrig
10426
Start reading samples relative to the first sample after the
reference trigger occurred.
DAQmx_Val_FirstPretrigSamp
10427
Start reading samples relative to the first pretrigger
sample. You specify the number of pretrigger samples to acquire when you
configure a reference trigger.
DAQmx_Val_MostRecentSamp
10428
Start reading samples relative to the next sample acquired.
For example, use this value and set Offset to -1 to
read the last sample acquired.
You can get/set/reset this property using:
DAQmxGetReadRelativeTo
DAQmxSetReadRelativeTo
DAQmxResetReadRelativeTo
However, in your implementation, you would still face problems with overflowing the buffer. Instead, I would recommend that you read all available samples and either average the data or just discard the samples that are not applicable.
Finally, to address your question regarding the sample rate in DAQmxCfgSampClkTiming, the sample rate is accurate down to the specifications of the device you are using. The USB-6008/6009 User Guide here provides the following specification:
Timing accuracy..................................... 100 ppm of actual sample rate
The NI USB-621x Specifications here indicates:
Timing accuracy..................................... 100 ppm of actual sample rate
Message Edited by Matt A on 07-11-2007 10:39 AM
Matt Anderson
Hardware Services Marketing Manager
National Instruments
Attachments:
Dev Range Reverse.JPG 2 KB
DAQmx Read.JPG 13 KB
Dev Range.JPG 3 KB -
HelloThank's for your helpsI hope this document is helpfulBest Regards,
Date: Sun, 22 Jun 2014 17:10:17 -0700
From: [email protected]
To: [email protected]
Subject: when i open pdf file it open all the pages but some pages give error massage (there was error processing a page,there was a problem reading this document 110) but if i open this page which give me error with google chrome it's work ? if you can help me th
when i open pdf file it open all the pages but some pages give error massage (there was error processing a page,there was a problem reading this document 110) but if i open this page which give me error with google chrome it's work ? if you can help m
created by Anoop9178 in Adobe Reader - View the full discussion
Hi,
Would it be possible for you to share the document?
Regards,
Anoop
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at https://forums.adobe.com/message/6485431#6485431
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
To unsubscribe from this thread, please visit the message page at . In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Adobe Reader by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.thank's for reply and your help
i did the step's that you told me but i still have the same problem
i have the latest v.11.0.7
i
i disable the protected mode -
I'm trying to install the latest (standards-based) browser I can on on old Windows XP Embedded computer. The computer's hardware does not meet the "Recommended Hardware" of a Pentium 4 (it has a P3). I initially tried installing/running Firefox version 28, and that seemed to work fine. Version 36 gives the error I stated in the question. It's not paramount that I run the *latest* version of Firefox (the browser is ONLY used for an intranet application), but I'd like to install the latest version that will run, and if there's a simple fix for this version, I'd like to explore that.
Regards,
GerratWell, I was pretty sure it didn't have malware. It was running a steady state - like program & we have dozens of these on our network (but not on our domain). We have a corporate anti-virus (Sophos) running on all the computers on our domain, and there are no notifications of anything suspicious coming from these units.
Just to be sure I installed and ran an antivirus scan against it though - as suspected, nothing suspicious found.
As I mentioned, FF 28 runs fine, it's just the latest (36.0) that doesn't run (I haven't tested any versions in between). Either seems to install without hitch, but when the latest version is run, it gives the error about the missing dll.
Regards,
Gerrat -
ITunes new version doesn't open at all. Gives error message
I downloaded 7.4.3 version of iTunes and it doesn't open at all. Gives error message. "iTunes has encountered a problem and needs to close."
I have previous version of iTunes in my spare HD, in the same computer, and it works perfectly fine.
I have unistalled and re-installed again and again many times including with the help of Apple Support help in the phone and came up with no clues of what's going on.
How can I get a previous version of iTunes to download to my PC? I have looking for a place on Apple's website where I could probably have my issue resolved, but I found nothing.
Thank you.Thanks to Jim Zack, the problem is solved.
If you're having this problem, go find the solution at the following page and read Jim's suggestion.
http://discussions.apple.com/thread.jspa?threadID=1155613 -
i have installed oracle 9i AS (EE)on NT,
Now i want to display reports in pdf/HTML on web broswer. For that i am trying to run report tester page given through broswer it is showing one page having Button(run report), when i click on that, it gives error unable to connected to database, and request rejected by report server. WHY ???
i want to display reports through JSP How it can be done? Does anybody knows it?
Naresh
nullPlease check at http://<server>/dev60html/runrep.htm for follwings :
01. your test.rdf must be in report60 folder
02. your db must contain scott user
03. connect string must be tested and give the same inplace of test
04. your webhost may contain a dot, please check this should be the same as yours
hope this will help
bye ! -
Hi All,
I applied SQL server 2008 R2 SP3 recently but report builder doesn't work since then
When click on report builder gives error like 'Application validation did not succeed. Unable to continue.
and when I try to see details the error summary like following:
+File, Microsfot.ReportingServices.ComponentLibrary.Controls.dll, has a different computed hash than specified in manifest.
this is urgent.
Please reply me asap.
thanks a lot in advance.
Regards,
Nik
Regards, NamanHi nikp11,
According to your description, you recently updated SQL Server 2008 R2 to SP3, Report Builder doesn’t work since then the error occurs: "Application validation did not succeed. Unable to continue".
This is an known issue in SSRS 2008 R2 SP3 that Microsoft has published an article addressing this issue. It is not planning to release a fix for this issue. But we could implement one of the following workarounds:
Install and run Report Builder 3.0 of SQL Server 2008 R2 RTM.
Install and run Report Builder of SQL Server 2014.
Uninstall Service Pack 3 then uninstall Service Pack 2 and then reinstall Service Pack 3.
Reference:
Report Builder of SQL Server 2008 R2 Service Pack 3 does not launch
Thank you for your understanding.
Best Regards,
Wendy Fu -
when i open pdf file it open all the pages but some pages give error massage (there was error processing a page,there was a problem reading this document 110) but if i open this page which give me error with google chrome it's work ?
if you can help me thank's
[email address removed by host]thank's for reply and your help
i did the step's that you told me but i still have the same problem
i have the latest v.11.0.7
i
i disable the protected mode -
After upgrading to Lion, Image Capture does not work, even though it is intel software. Gives error 9931. What gives?
Ouch, if it is indeed damaged, then sadly you need to restore the whole danged huge OS!
Didn't used to be this way before Lion/10.7.
Bootup holding CMD+r, or the Option/alt key to boot from the Restore partition & use Disk Utility from there to Repair the Disk, then Repair Permissions.
If that doesn't help Reinstall the OS. -
How to give error message for the screen element text field when wrong i/p
How to give error message for the screen element text field when wrong i/p
when wrong input given
eg.
I have a text box with SBOOK-CARRID
so when user give wrong entry in text box i.e LG
then I should give some error stating that the the input is invalid or not available ,
now it showing the error of standard messages,
i want manual message to be displayed when error comes.
Thank you,
Regards,
Jagrut Bharatkumar ShuklaHi all,
Thank you for your valuable reply,
but the thing is that its a screen field,
i.e text box not a selection screen
i created in screen layout
with name sbook-carrid
now i want to get error message display if wrong i/p is given
thank you.
Regards,
Jagrut bharatkumar Shukla,
Maybe you are looking for
-
Hi, We have facing several problems in our SAP PI 7.31 single stack environment. The problem is concerning broken connection with another platform. When network problems occurs the messages change to status "delivering". These messages are in de
-
I am trying to display a list sorted by year, then title and then subtitle. if there are no subtitles, titles should appear by itself. if there are subtitles then they should appear under titles, all in alph order. Here is a pic of what i am trying t
-
Hi, Is there any standard bapi that takes cost center as input and displays its corresponding cost center group. Thanks, Divya.
-
Silent install of HTML5 Pack Dreamweaver CS5
Hi I have installed the Enterprise version of Dreamweaver CS. On first launch I'm prestented with a dialog box "" done silently without any user intervention.The Extension Manager will now launch and finish updating Dreamweaver" it then prompts to in
-
I recently upgraded to RoboHelp 8 and I opened my old project to update an HTML online help. Whenever I generated the online help and I clicked to view the result on the PC with RoboHelp 8, everything looked fine. Then, I copied all generated files t