Bapi to get Cost center group

Hi,
Is there any standard bapi that takes cost center as input and displays its corresponding cost center group.
Thanks,
Divya.

hii,
just have a luk.
BAPI_COSTCENTER_CREATEMULTIPLE Create One or More Cost Centers
BAPI_COSTCENTER_GETDETAIL Detailed Information About Cost Center For Key Date
BAPI_COSTCENTER_GETDETAIL1 Detail Information for Cost Center on Key Date (1)
BAPI_COSTCENTER_GETLIST List of Cost Centers Using Selection Criteria
BAPI_COSTCENTER_GETLIST1 List of Cost Centers for Selection Criteria (1)
BAPI_CTR_GETACTALLOCATIONTYPES Checks Which IST-ILV Types are Possible According to Activity Type Categ.
BAPI_CTR_GETACTIVITYPRICES Read prices for cost center/activity type according to selection
BAPI_CTR_GETACTIVITYQUANTITIES Rad plan activity/capacity/scheduled activity for cost center/acty type
BAPI_CTR_GETACTIVITYTYPES List of cost centers / activity types with control information
regards,
Shweta

Similar Messages

How to get cost center group from cost center

Hello
I have cost center and i need to get the cost center group.
Anyone having an idea how to get it???
Thanks
Parvez

Hi,
Cost centre could be assigned to different cost centre groups. For standard hierarchy, you can retrieve it from CSKS table, but for other groups SETLEAF table (class 0101) will provide you a complete answer.
Regards,
Eli

Cost Center Group Text

Can anyone advice, from which Database Table I could get 'Cost Center Group Text/Description'.
Thanks in advance...

Well There are the cost center text tables
CSKT                           Cost Center Texts
CSKU                           Cost Element Texts
CSKV                           Resource texts
I always CSKT , field "KTEXT", as you already get answer above !!
Hope thisll give you idea!!
<b>P.S award the points.!!! DOn`t forget :)!!!!</b>
Good luck
Thanks
Saquib Khan
"Knowledge comes but wisdom lingers!!"
"Some are wise and some are otherwise"

Cost center Group associated with a Cost center

Hi Experts ,
I have a requirement , where I need to find the cost center group of given cost center.
Is there any FM to do the same?
I have Cost center in the Input and should get Cost Center group associated with it.
Thanks !!

BAPI_COSTCENTER_GETDETAIL

Cost Center Group and Profit center Group

Hi All,
The Client is requested to have Cost Center Group in the CO reports. I have trying to analyse how to get Cost center group in the report or Info Provider.
When i went to T-code KS03 in ECC ( Display Cost Center), i get the Hierarchy Area field called KHINR, which shows the Cost center grp. Upon discussing with Functional person, he has told that this Field lies in Table CSKS (Cost Center Master).
Now i am thinking to enhance the Cost Center Attribute Dsrc. with this Field KHINR.
I just want some suggestions or advice on how to bring Cost center grp and Profit center grp
Thanks and Regards
Edited by: Raihaan Khan on Dec 12, 2008 3:35 PM

Hello Simon, Thanks again for all your FICO resolutions.
Yes i truly agree that Cost Center Grp is CostCenter Hierarchy,, but i dont understand, y the Client has told that he needs the field KHINR in the Cost Center Report too.
Actually he wants Cost Center Group wise report and NOT Cost center wise report.
I have thght of extracting the Complete Std Hierarchy to 0COSTCENTER and then in the report , i can give a Cost Center Hierarchy Variable(probably a selection screen), such that the User can select the Nodes he want and then drill down the CostCenter Groups to see his respective Cost center accounting.
Please opinionate on this
Thanks

Get Name for CO Cost Center Group and BGD Processing

Hi,
I use these function modules to get the cost center group nodes in the CO hierarchy.
If I pass it a value that is in two controlling areas
if prompts another screen to pick which controlling area we want to look in. My problem is when I try to run this report in the background it gets hung up on this screen waiting for input. any ideas on how to get around this.
here is the reference code.
thanks
Please note that the following logic is parts of SAP example report
RGSEX001.
Get the internal Set-ID from the external name of the set
Selection of sets can be restricted to a specific set class or
to sets matching a specific table field.
See documentation of function module G_SET_GET_ID_FROM_NAME
If the set class, subclass and setname is known, function module
G_SET_ENCRYPT_SETID should be used alternatively (see RGSEX020)
    CALL FUNCTION 'G_SET_GET_ID_FROM_NAME'
         EXPORTING
              shortname = w_set
              old_setid = w_setid
         IMPORTING
              new_setid = w_setid.
Read the complete hierarchy (set and all subsets)
    CALL FUNCTION 'G_SET_TREE_IMPORT'
         EXPORTING
              setid              = w_setid "Set-ID, not the Setname!!!
              no_table_buffering = ' '
         TABLES
              set_hierarchy      = it_hierarchy
              set_values         = it_values.

Hi!
For reading cost center hierarchy you can try K_HIERARCHY_TABLES_READ.
It returns near the same info as one you've mentioned, works well for single controlling area and I hope in case of ambiguity it will raise one of exceptions provided. Give it try.
Regards,
Maxim.

How to find the cost center group from cycle/ segment in CO module?

Hi All,
I need to fetch the list of cost centers in the cost center group against the cycle.
Is there any table which will store the list of cost centers against the cycle?
or else, what I was thinking is use of BAPI BAPI_COSTCENTERGROUP_GETDETAIL, which will give me the list of cost centers,
but we need to pass the controlling area + cost center grp to fetch the cost centers from BAPI, I have controlling area with me but not the cost center grp name, only I have Cycle info lke cycle name, segment name, seq number. so how to find the cost center grp name from the cycle name?
Regards,
Mrunal

FM: RK_AL_CYCLE_READ
CHECK TABLE: T811K

Report Painter: P&L on Cost Center Group,BA(WBS/Internal Order) wise

Dear Experts, i require to create a report in report painter.
The requirement is to display P&L account on cost center group wise; if cost center is not mentioned and WBS/internal order is mentioned it should be shown under the respective Business Area and if non of the above is mentioned it should be shown in a separate column (General). The total of each GL should match the trial balance amount.
Please Guide Me.

Hi,
Its little bit complex to accommodate in report painter to in 1page.
Coz. Cost Center information will get in different library in GRR1
1AB Cost Centers: Variance Analysis FICTM 07.02.2013 CCSS
6O2 Internal Orders SAP 24.03.2000 RWCOOM
better you can develop with ABAP report.
Regd,
Khan.

How to receive the cost center group from legacy system

Hi Experts,
i need to collect cost center group hierarchy from Legacy system.is there any standerd tcode available to get it.
Usefull answers will be rewarded.
looking forward to hear from all.
regards,
Tom

Hi,
Cost Center group can be viewed from field SETCLASS of table SETLEAF.
To Fetch the relevant cost center from a cost center group, we can use FM: 'K_HIERARCHY_TABLE_READ'.
Below thread may give you more details.
Cost Center Group
Regards,
Ranjith.

How to use LSMW using the IDOC to upload and maintain cost center group

Hi Everyone,
Is there anyone who knows how to use LSMW using the IDOC functions instead of the recording. I wanted to upload the alternative cost center group I created in the system.
reply would be greatly appreciated
Warm Regards

Hi Praveen,
There is a risk trying to migrate data directly into standard tables because this can generate database inconsistences or wrong inserted data according to what is customized in the target system. I do not recommend migrate like this.
With LSMW you use objects like direct input programs, idocs, bapis and recorded batch input. Try to create a project and use an standard object for your data. Also, check in SXDA transaction (Goto-->DX programs) if there is a standard program for your data.
Anyway, if you want to upload data directly to tables, read below thread:
["UPLOAD CSV FILE";
[how to upload .csv file into a custom table;
Regards,
Roger

Why authorization for cost center groups does not worked ?

hello all,
I would like to give authorization for a CO report (S_ALR_87013625) based on authorization values : cost center groups.
But, unfortunately, it doesn't work. I get a message : No authorization for x of x read records.
Is it only possible to give authorization on standard hierarchy and cost center ?
Please, help me
Thanks and best regards

hi,
Run the su53 transaction.See what authorization was missing

BAPI to get cost line items for Cost Centers

Hi,
does anybody know a BAPI to get
cost line items for Cost Centers
or other Cost Center data?
e.g. actual, plan, commitments
I'm thankful for help.

hi,
check this BAPI <b>BAPI_COSTCENTER_GETDETAIL1</b>
regards
vijay

Function module for custom report for cost center group

Hello all,
I wonder, if there is any SAP function module for following query:
We have got a custom program, which evaluates cost centers. We would like to evaluate a cost center group, like it is available within the report painter - the output screen is splitted into two parts, on the left part there is the cost centre group hierarchy and on the right side, there are the values for the node, which is selected within the hierarchy.
Is there any standard function module od do we have to program it ourself?
Thanks in advance

Hi Peter,
You have a BAPI which gives you the details of cost centre group, if this is what you are looking for:
BAPI_COSTCENTERGROUP_GETLIST
Regards,
Eli

Display Cost Center Group Text

Hi..
I'm new to abap, and I am working for abap for hr module now. My question will be...
How can I display a cost center group text in report? Is there a text table for it?
I get the cost center value from table pa0001-kostl.
I find the function BAPI_COSTCENTERGROUP_GETLIST by searching this forum. But, the parameters I can get is only for controllingareamask from pa0001-kokrs.
any help would be grateful
thanks

Dear Andreas,
here is the figure of my question,
mycompany--Plant1--department1.1--division1.1.1
                                --division1.1.2
                 --department1.2
                 --department1.3
         --Plant2--department2.1
                 --department2.2
                 --department2.3
my company has two plants, each plant have departments, and each department has divisions which have their own cost center.
I want to know which plant the division belongs to by using it cost center. The cost center group of the division will be the cost center of department right?
please advise...
Dear Bhavik,
Thanks,.. but the FM is not return me anything.

Change Cost Center Group - Error

Good day all
We are trying to change the cost center group for a cost center. We get the following error message:
"Change range must cover complete existance period".
How do we fix this?
Thank you in advance.
Kind regards
Lu.

Pls check if there is any data, which has been posted to this particular Cost center
Regards
Sanil Bhandari

Bapi to get Cost center group

Similar Messages

Maybe you are looking for