4.0 ORA-06502 and ORA-01722 in different languages
Hi!
After 4.0 installation on my XE-database there are some errors - dependig on which language is actual.
german language is actual:
home > administration > dashboard:
every report results ORA-01722
english language is actual:
home:
report about top applications results
ORA-06502: PL/SQL: numeric or value error ORA-06512: at "APEX_040000.WWV_FLOW_4000_UI", line 731 ORA-06502: PL/SQL: numeric or value error: character to number conversion error
Is there any idea about what is wrong?
Kind regards,
Andrea
Hi Andrea,
I see similar errors on my instance. I updated to 4.0.1 and saw some of them disappear, but a few of them are still there. Even reinstalling 4.0.1 from scratch did not change anything about this.
Apparently the de-translation has some gaps, e.g. the title for the worspace administration is
"Workspace &COMPANY verwalten." where &COMPANY should be the workspacename, or the confirmation message when deleting an application, which says "Anwendung &F4000_P20_FLOW_ID wurde gelöscht.". Both messages appear with the correct substitution value as soon as I switch the language to English.
What made me wonder at first wass that both dashboards for "Top Applications" and "Top Users" worked in German, but threw erros in the English version. Without changing anything in my system they "started" working later, so I guess there was a problem with the proper initialization for those reports.
I still have a complete set of ORA-01722 in the German version of the activity dashboard, which works better in English:
Top Users, Top Applications and Top Pages say "Report contains no data", which is better than ORA-01722. Recent Logins shows correct results, Recent errors gives me the 01722-errors I produced before.
Does anyone else have these problems? Or does anyone have a solution for them?
Similar Messages
-
Warning ORA-01002, ORA-06502 AND ORA-12899
Hi All,
When iam executing my mapping iam facing the following warninigs.
Name Status Log
MAP_ Warning CursorFetchMapTerminationRTV20007
MAP_ Warning ORA-01002: fetch out of sequence
ORA-02063: preceding line from link
MAP_Warning ORA-06502: PL/SQL: numeric or value error: character string buffer too small
MAP_Warning ORA-12899: value too large for column %s (actual: %s, maximum: %s)
ORA-02063: preceding line from link
Further to inform you that, in source and target the data type size is same.
How can i resolve it
Thanks in advance.I mean to say select while executing it from Database you can pin-point the exact line which cause error.
cheers
Nawneet -
ORA-06502 and ORA-06503 if more than 3700 rows
In a simple application one of the two tables has about 10.000 rows. If I limit the "Max Row Count" to 3700 the "select list" will be generated without error
("row(s) 1-17 of more than 3700").
With "Max Row Count" 3710 and 3720 an ORA-06502, with "Max Row Count" 3730 an ORA-06503 occur and no select list will appear.
Other values greater 3710 e.g. 4000 don't cause any Oracle error but no select list was built.
It seems to be that the value limit will be exeeded in cases where the row count is greater than 3700.Joachim,
Select lists are limited to 32,000 characters. This includes the select and option tags and all the display and return values. Depending on your pagination settings, specifically on the number of rows you display on each page, this translates into around 4000 rows being supported by this particular pagination style. If you have more rows then that, I'd recommend using a different pagination style, one that does not show a select list.
Regards,
Marc -
Help - I'm getting errors ORA-06502:and ORA-01002: at runtime
Help
I am getting the following errors at runtime and need some isdeas on what to check:
ORA-06502: PL/SQL: numeric or value error: character string buffer too small
ORA-06512: at "OWB_RUNTIME.WB_RT_MAPAUDIT", line 1736
ORA-06512: at "OWB_RUNTIME.WB_RT_MAPAUDIT", line 2625
ORA-06512: at "OWB_TARGET.MAP_BSL_PLACEMENT_FACT2B", line 1148
ORA-01002: fetch out of sequence
ORA-02063: preceding line from BASIL@LOC_TARGET_NEW_LOC_BASIL_SOURC
ORA-06512: at "OWB_TARGET.MAP_BSL_PLACEMENT_FACT2B", line 1457
ORA-06512: at "OWB_TARGET.MAP_BSL_PLACEMENT_FACT2B", line 3458
ORA-06512: at line 1
My Mapping is a fact recording enrolments in courses (located in my main target database - oracle 9i)
joining with an equi-join to a table that contains an audit of all changes to the enrolment (in my source database - Sybase 12.5)
then updating two fields in a tabke that is a second definition of the first fact
The equi join uses the key to the enrolment table, plus a transaction type to identify only the creation of the record
Between the join and the update of the table one field is going thru a trim (converting char to varchar2) then an expression that sets the value to "not_supplied" for cases where the value was null.
The other field is a date (from sybase datetime to oracle Date)
(they are the user that created the enrolment and the date the enrolment was actioned)
I created this mapping by copying another mapping that does pretty much the same thing, deleting the join and table it was joining to and adding the audit table and new join.
Both mapping deploy fine with no warnings, the original executes fine the variation gives the errors above.
I have tried removing one then the other of the columns I am updating. (the same errors occur)
I am about to re-write the mapping from scratch, but can anyone guess what is wrong with it ? (I'm using OWB 9.2.0.2.8)Thanks for the suggestion
There are no "char(32767)"s in the package - altho there are "varchar2(32767)"s
I have tried a variotion on the script, outputting the result to a new table instead of updating the enrolment - which ran fine so the error is in the update.
I tried adding a step using the result in the temp table to update the enrolment table - and got my errors again. So there is something funny in my data. Nothing obvious shows.
The full temp table contains 745292 records - when it failed 150 records had been written.
I note that although I had expected only to find one record per enrolment, there are some where there are two (@#$%!! source system writing two "insert" audit records) - could my problem be that I am updating a record previously updated - where do I set the script to commit as it goes?
Sandra -
Instance terminted with ORA-00445 and ORA-00494
Hi Folks,
Oracle 11g Instance terminated after ORA-00445 and ORA-00494. Not sure what is the problem didnot have this problem before. Can any body pls help?
Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
PL/SQL Release 11.2.0.1.0 - Production
CORE 11.2.0.1.0 Production
TNS for Linux: Version 11.2.0.1.0 - Production
NLSRTL Version 11.2.0.1.0 - Production
Below is the message found in alertlog.
Archived Log entry 17939 added for thread 1 sequence 17973 ID 0xee1270c6 dest 1:
Thu Apr 19 02:32:15 2012
WARNING:io_getevents timed out 600 sec
Thu Apr 19 02:32:17 2012
WARNING:io_getevents timed out 600 sec
Thu Apr 19 02:33:32 2012
WARNING:io_getevents timed out 600 sec
Thu Apr 19 02:35:56 2012
Process 0x0xdfb80810 appears to be hung while dumping
Current time = 1203097316, process death time = 1203032607 interval = 60000
Attempting to kill process 0x0xdfb80810 with OS pid = 7563
OSD kill succeeded for process 0xdfb80810
Thu Apr 19 02:36:32 2012
WARNING:io_getevents timed out 600 sec
Thu Apr 19 02:38:11 2012
Errors in file /apps/opt/oracle/admin/diag/rdbms/vchsit2/vchsit2/trace/vchsit2_smco_8548.trc (incident=76297):
ORA-00445: background process "W000" did not start after 120 seconds
Incident details in: /apps/opt/oracle/admin/diag/rdbms/vchsit2/vchsit2/incident/incdir_76297/vchsit2_smco_8548_i76297.trc
Thu Apr 19 02:38:11 2012
Errors in file /apps/opt/oracle/admin/diag/rdbms/vchsit2/vchsit2/trace/vchsit2_arc2_7523.trc (incident=76329):
ORA-00494: enqueue [CF] held for too long (more than 900 seconds) by 'inst 1, osid 7315'
Incident details in: /apps/opt/oracle/admin/diag/rdbms/vchsit2/vchsit2/incident/incdir_76329/vchsit2_arc2_7523_i76329.trc
Thu Apr 19 02:38:11 2012
Fatal NI connect error 12537, connecting to:
(LOCAL=NO)
VERSION INFORMATION:
TNS for Linux: Version 11.2.0.1.0 - Production
Oracle Bequeath NT Protocol Adapter for Linux: Version 11.2.0.1.0 - Production
TCP/IP NT Protocol Adapter for Linux: Version 11.2.0.1.0 - Production
Time: 19-APR-2012 02:38:11
Tracing not turned on.
Tns error struct:
ns main err code: 12537
TNS-12537: TNS:connection closed
ns secondary err code: 12560
nt main err code: 0
nt secondary err code: 0
nt OS err code: 0
opiodr aborting process unknown ospid (2743) as a result of ORA-609
Thu Apr 19 02:38:12 2012
Trace dumping is performing id=[cdmp_20120419023812]
Killing enqueue blocker (pid=7315) on resource CF-00000000-00000000 by (pid=7523)
by killing session 6.1
Killing enqueue blocker (pid=7315) on resource CF-00000000-00000000 by (pid=7523)
by terminating the process
ARC2 (ospid: 7523): terminating the instance due to error 2103
Instance terminated by ARC2, pid = 7523
Thu Apr 19 10:43:07 2012Hi;
Please see:
ORA-00445: Background Process "xxxx" Did Not Start After 120 Seconds [ID 1345364.1]
Regard
Helios -
Ora 600 and ora 7445 error in oracle 10g r2
hi all,
we are using Oracle 10g r2.
os is windows 2003 server,
ram is 4 gb.
front end is java .
we got a below mentioned errors.
i got the RA-00600: internal error code, arguments: [qerghFetch:inc], [], [], [], [], [], [], [],
and ORA-07445: exception encountered: core dump [ACCESS_VIOLATION] [unable_to_trans_pc] [PC:0x61F04AC9] [ADDR:0xC] [UNABLE_TO_READ] []
and Error 0 in kwqmnpartition(), aborting txn errors.
for aug 3 11.42.47 we got a ora 600 error after that through front end (java) users can't able to connect the database.the not able to executed the query session disconnected error.
what is reason for theis error . how it will rectifiy.?
pls advice.Below i attached the alret log message .
Sun Aug 02 04:04:24 2009
Error 0 in kwqmnpartition(), aborting txn
Sun Aug 02 05:48:10 2009
Error 0 in kwqmnpartition(), aborting txn
Sun Aug 02 05:49:10 2009
Error 0 in kwqmnpartition(), aborting txn
Sun Aug 02 07:38:49 2009
Thread 1 advanced to log sequence 1732
Current log# 3 seq# 1732 mem# 0: E:\ORACLE\PRODUCT\10.2.0\ORADATA\ORCL\REDO03.LOG
Sun Aug 02 07:44:14 2009
Error 0 in kwqmnpartition(), aborting txn
Sun Aug 02 07:45:14 2009
Error 0 in kwqmnpartition(), aborting txn
Sun Aug 02 22:00:26 2009
Thread 1 advanced to log sequence 1733
Current log# 1 seq# 1733 mem# 0: E:\ORACLE\PRODUCT\10.2.0\ORADATA\ORCL\REDO01.LOG
Mon Aug 03 07:08:15 2009
Thread 1 advanced to log sequence 1734
Current log# 2 seq# 1734 mem# 0: E:\ORACLE\PRODUCT\10.2.0\ORADATA\ORCL\REDO02.LOG
Mon Aug 03 09:28:23 2009
Error 0 in kwqmnpartition(), aborting txn
Error 0 in kwqmnpartition(), aborting txn
Mon Aug 03 09:30:27 2009
Error 0 in kwqmnpartition(), aborting txn
Mon Aug 03 11:42:47 2009
Errors in file e:\oracle\product\10.2.0\admin\orcl\udump\orcl_ora_6012.trc:
ORA-00600: internal error code, arguments: [qerghFetch:inc], [], [], [], [], [], [], []
Mon Aug 03 13:20:00 2009
Thread 1 advanced to log sequence 1735
Current log# 3 seq# 1735 mem# 0: E:\ORACLE\PRODUCT\10.2.0\ORADATA\ORCL\REDO03.LOG
Mon Aug 03 16:07:07 2009
Errors in file e:\oracle\product\10.2.0\em_2\rdbms\trace\orcl_ora_4756.trc:
ORA-07445: exception encountered: core dump [ACCESS_VIOLATION] [unable_to_trans_pc] [PC:0x61F04AC9] [ADDR:0xC] [UNABLE_TO_READ] []
Mon Aug 03 16:07:11 2009
Process m000 died, see its trace file
Mon Aug 03 16:07:11 2009
ksvcreate: Process(m000) creation failed
Mon Aug 03 16:08:37 2009
Error 0 in kwqmnpartition(), aborting txn
Error 0 in kwqmnpartition(), aborting txn
Mon Aug 03 16:10:40 2009
Error 0 in kwqmnpartition(), aborting txn
Mon Aug 03 17:25:05 2009
Error 0 in kwqmnpartition(), aborting txn
Error 0 in kwqmnpartition(), aborting txn
Mon Aug 03 17:27:11 2009
Error 0 in kwqmnpartition(), aborting txn
Mon Aug 03 17:32:19 2009
Error 0 in kwqmnpartition(), aborting txn
Mon Aug 03 17:33:24 2009
Error 0 in kwqmnpartition(), aborting txn
Mon Aug 03 18:52:08 2009
Error 0 in kwqmnpartition(), aborting txn
Mon Aug 03 18:54:09 2009
Error 0 in kwqmnpartition(), aborting txn
Mon Aug 03 19:05:33 2009
Error 0 in kwqmnpartition(), aborting txn
Error 0 in kwqmnpartition(), aborting txn
Error 0 in kwqmnpartition(), aborting txn
Error 0 in kwqmnpartition(), aborting txn
Error 0 in kwqmnpartition(), aborting txn
Error 0 in kwqmnpartition(), aborting txn
Error 0 in kwqmnpartition(), aborting txn
Error 0 in kwqmnpartition(), aborting txn
Error 0 in kwqmnpartition(), aborting txn
Error 0 in kwqmnpartition(), aborting txn
Error 0 in kwqmnpartition(), aborting txn
Error 0 in kwqmnpartition(), aborting txn
Error 0 in kwqmnpartition(), aborting txn
Error 0 in kwqmnpartition(), aborting txn
Error 0 in kwqmnpartition(), aborting txn
Error 0 in kwqmnpartition(), aborting txn
Error 0 in kwqmnpartition(), aborting txn
Error 0 in kwqmnpartition(), aborting txn
Error 0 in kwqmnpartition(), aborting txn
Error 0 in kwqmnpartition(), aborting txn
Error 0 in kwqmnpartition(), aborting txn
Error 0 in kwqmnpartition(), aborting txn
Error 0 in kwqmnpartition(), aborting txn
Error 0 in kwqmnpartition(), aborting txn
Mon Aug 03 19:09:02 2009
Errors in file e:\oracle\product\10.2.0\em_2\rdbms\trace\orcl_ora_5132.trc:
ORA-07445: exception encountered: core dump [ACCESS_VIOLATION] [unable_to_trans_pc] [PC:0x7C34126B] [ADDR:0x0] [UNABLE_TO_WRITE] []
Mon Aug 03 19:10:27 2009
Error 0 in kwqmnpartition(), aborting txn
Error 0 in kwqmnpartition(), aborting txn
Error 0 in kwqmnpartition(), aborting txn
Error 0 in kwqmnpartition(), aborting txn
Error 0 in kwqmnpartition(), aborting txn
Error 0 in kwqmnpartition(), aborting txnHi reshumakur
As this is your PRODUCTION system THEN_ The best help to offer in case of ORA-600, and ORA-7445 is to open SR with metalink. Submit with the SR the following
1- Alert log
2- Trace files (in ur case e:\oracle\product\10.2.0\admin\orcl\udump\orcl_ora_6012.trc: and e:\oracle\product\10.2.0\em_2\rdbms\trace\orcl_ora_4756.trc:)
3- Describe what was happening when you had these errors.
Try to avoid free help when you have ORA-600 and ORA-07445. This errors could be becuase of BUGS. Oracle Support will know this from the call stack in the trace file.
Then Do your best to patch 10.2.0.4 and the latest CPU patch.
Good Luck -
I have a new installed database running in ARCIHVELOG mode on SUSE 10SP3. Catalog is not used. When I try to restore the database from a level 0 backup based on SCN, ORA-01180 and ORA-01110 were raised out today. Please help me through this. Thx. The senario follows:
1. I got the current SCN by "select dbms_flashback.get_system_change_number from dual". Say it's 12345;
2. I did a level 0 hot backup with current control file, archived logs and parameter files. Everything went well;
3. Some other DMLs are applied to the database;
4. I want to do a SCN-based incomplete recovery for this database to SCN 12345. Then I
1) shutdown immediate;
2) startup nomount;
3) restore the control file from backupset;
5) startup mount;
6) catalog start with "[backupset path]";
7) restore database until scn 12345.
Just at step 4.7, ORA-01180 and ORA-01110 were raised out, saying cannot create data file 1. Note: Backup files are existing and file permissions are all OK.
Then I issues "list incarnation of database". There is just one record with incarnation id 1.
So I queried v$log_history, found serveral record there. The most recent one has NEXT_SCN later than 12345, say 12400. Then I tried to restore database until this SCN. It WORKED! The restore and recovery succeeded.
My questions are:
1. Why cannot I restore the database to a previous SCN, say 12345, but 12400 is OK?.
2. If the database was RESETLOG prior to my recovery, should I reset database to the incarnation where I took my backup? What can I do if there is no that incarnation information in my control file?
Waiting for your suggestion.Hi guys. There is one update.
This issue is caused by the incorrect SCN vs. backup set. I got this SCN before the backup started. According to Oracle docs, it's not allowed for an SCN based recovery.
Now, I changed the sequence of my operations, so that SCN is got once backup is done, which is exact the "most recent sequence# and least SCN" mentioned by some thread in this forum. It works now.
Anyone could explain why the SCN got prior to the level 0 backup is not recognized by restore/recovery phase? Thanks. -
ORA-03113 and ORA-03114 problems
Hi,
I'm experimenting Oracle8i. I'm installing 8.1.7 to RedHat Linux 7.0 out of box without recompiling the kernel. I set the SHMMAX to 0.5*258MB memory on the machine by echoing the number to /proc/sys/kernel/shmmax.
I checked that the system meets the requirements of Oracle's Installation Guide except SEMOPM. The RedHat Linux 7.0 sets it to 32, but Oracle requires 100.
I chose Oracle8i EE Typical Installation. The installation was ok to the point of running root.sh. Several syntax errors occur from root.sh. But they are minor syntax errors. I checked the code, regardless of errors, the scripts accomplished what it intends to do. The installation continued. I choose automatic configure Net8 when it ran Net8 Configuration Assistant and the Net8 Configuration was completed successful.
When it started Oracle Database Configuration Assistant, it created a database. But when it initialized the database, error messages ORA-03114 and ORA-03113 appeared many times. Each time, I chose to ignore. The final message was "Database creation completed with warnings."
After installation, I ran svrmgrl
$svrmgrl
SVRMGR> connect INTERNAL
Connected.
SVRMGR> startup
ORA-03113 end-of-file on communication channel
Checking the meaning of error messages, it says that if ORA-03113 occurs during a connection attempt, check the setup files for the appropriate Net8 driver and confirm Net8 software is correctly installed on the server.
During installation, I chose Local naming method. There are following files in $ORACLE_HOME/network/admin/
listener.ora
sqlnet.ora
tnsnames.ora
shrept.lst
To my layman's eye, they looked ok. I can even telnet to the linux machine with database name, although I don't know how the machine has acquired the alias without any changes to /etc/named.conf nor any changes to any files in /var/named directory.
Please tell me what is correctly installed Net8? or what went wrong and how I should fix the problem.
Thanks,
Wayne
nullI seem to have 8.1.7 creating a database with RH Linux 7.1 now. This was an important clue, since 7.1 hiccups 65% into the link phase of installation, thereby requiring the stubs patch to be run at that time, whereas 7.0 runs quite happily through the install & link without using the patch.
HOWEVER... before invoking dbassist to create the database under 7.1, you apparently need to export ASSUME_LD_LIBRARY = 2.2.5, etc., again, as you would do for the first time installing under RH 7.0.
null -
OBIA- Connection Problems ORA-00604 and ORA-02248
Hi,
i have an installation OBI Server, Presentation Services, and Scheduler on RH Linux 64Bit, Oracle 11 DB, OBI Admin on Win xp,
in online mode when i try import from Database i got following errors:ORA-00604 and ORA-02248
but i can Create ibots and i see with sqlplus the created ibots in the DB.
have anyone an idea, why the scheduler can read and write in the DB, but i cant read via Admintool, i try to connect the same db)
Thxcan you connect from Windows box using SQLPLUS? yes i can connect
are you using native connection in Admin tool or ODBC? I try to use Native (OCI) to connect the Oracle DB
check the above to eliminate the connectivity issues. -
ORA-604 and ORA-4031 during installation of SAP
Hi,
I tried to install Oracle 10.2.0.2 on Windows 2003 with SAP R3E 47X2.
However, during the installation on the Database Load phases it pops up a ORA-604 and ORA-4031 error log. It was unable to completed the Database Load phase showed as R3 load jobs: running 1, waiting 0.
I tried to set the share pool in init.ora as shared_pool_size = 40000000. It still show up as shared memory issue.
The log shows as,
E:\usr\sap\IDE\SYS\exe\run/R3load.exe: START OF LOG: 20081201110818
E:\usr\sap\IDE\SYS\exe\run/R3load.exe: sccsid @(#) $Id: //bas/640_REL/src/R3ld/R3load/R3ldmain.c#12 $ SAP
E:\usr\sap\IDE\SYS\exe\run/R3load.exe: version R6.40/V1.4 [UNICODE]
Compiled Dec 15 2005 22:22:21
E:\usr\sap\IDE\SYS\exe\run/R3load.exe -dbcodepage 4103 -i C:\Program Files\sapinst_instdir\R3E47X2\SYSTEM\ABAP\ORA\UC\DB/SAPSSEXC.cmd -l C:\Program Files\sapinst_instdir\R3E47X2\SYSTEM\ABAP\ORA\UC\DB/SAPSSEXC.log -stop_on_error
DbSl Trace: ORA-1403 when accessing table SAPUSER
DbSl Trace: Failed to register client info: orc=604
(DB) INFO: connected to DB
(DB) INFO: DbSlControl(DBSL_CMD_NLS_CHARACTERSET_GET): UTF8
DbSl Trace: Error in exec_immediate()
DbSl Trace: ORA-604 occurred when executing SQL statement (parse error offset=15)
(DB) ERROR: DDL statement failed
(TRUNCATE TABLE "DYNPSOURCE")
DbSlExecute: rc = 99
(SQL error 604)
error message returned by DbSl:
ORA-00604: error occurred at recursive SQL level 1
ORA-04031: unable to allocate 4120 bytes of shared memory ("shared pool","select user#,type# from user...","Typecheck","kgghteInit")
(DB) INFO: disconnected from DB
E:\usr\sap\IDE\SYS\exe\run/R3load.exe: job finished with 1 error(s)
E:\usr\sap\IDE\SYS\exe\run/R3load.exe: END OF LOG: 20081201110858
Could anyone help me about it?
Thanks.hi Nikhuj,
I reset the installation and however endup the installation still have an error. Please help me to check with the following:
SQL> connect system
Enter password:
ERROR:
ORA-00604: error occurred at recursive SQL level 2
ORA-04031: unable to allocate 4120 bytes of shared memory ("shared
pool","select ts#,file#,block#,nvl(...","Typecheck","kgghtInit")
SQL> show parameters shared_pool;
NAME TYPE VALUE
shared_pool_reserved_size big integer 12881756
shared_pool_size big integer 124M
SQL> alter system set shared_pool_size=40000000;
alter system set shared_pool_size=40000000
ERROR at line 1:
ORA-02097: parameter cannot be modified because specified value is invalid
ORA-04034: unable to shrink pool to specified size
As I had changed the parameter in initsmpl.ora shared pool from 10000000 to 40000000. The log as below was showing that:
SAPAPPL1.log:
Error accessing package DBMS_APPLICATION_INFO
Connected.
(IMP) INFO: import of LXE_PPX__1 completed (1 rows) #20081201200124
(DB) INFO: LXE_PPX__1~0 created #20081201200124
DbSl Trace: Error in exec_immediate()
DbSl Trace: ORA-604 occurred when executing SQL statement (parse error offset=34)
(DB) ERROR: DDL statement failed
(CREATE INDEX "LXE_PPX__1~CNT" ON "LXE_PPX__1" ( "T_LANG" , "S_LANG" ,
"DOMATYP" , "DOMANAM" , "USAGECNT" ) TABLESPACE PSAPIDE STORAGE (INITIAL 0 NEXT
0000010240K MINEXTENTS 0000000001 MAXEXTENTS 2147483645 PCTINCREASE 0 ) )
DbSlExecute: rc = 99
(SQL error 604)
error message returned by DbSl:
ORA-00604: error occurred at recursive SQL level 1
ORA-04031: unable to allocate 4120 bytes of shared memory ("shared pool","CREATE
UNIQUE INDEX "PA0399~...","Typecheck","kgghteInit")
(DB) INFO: disconnected from DB
E:\usr\sap\IDE\SYS\exe\run/R3load.exe: job finished with 1 error(s)
E:\usr\sap\IDE\SYS\exe\run/R3load.exe: END OF LOG: 20081201200129
SAPAPPL2.log:
(DB) INFO: TCN2T~0 created #20081201200843
DbSl Trace: Error in exec_immediate()
DbSl Trace: ORA-604 occurred when executing SQL statement (parse error offset=0)
(DB) ERROR: DDL statement failed
(CREATE TABLE "TCN41" ( "MANDT" VARCHAR2(9) DEFAULT '000' NOT NULL , "PLNAW"
VARCHAR2(3) DEFAULT ' ' NOT NULL , "PROFIDNETZ" VARCHAR2(21) DEFAULT ' ' NOT NULL
, "FLG_ERF_H" VARCHAR2(3) DEFAULT ' ' NOT NULL , "ESOKZ" VARCHAR2(3) DEFAULT ' '
NOT NULL , "EKORG" VARCHAR2(12) DEFAULT ' ' NOT NULL , "KSTAR_FRMD" VARCHAR2(30)
DEFAULT ' ' NOT NULL , "STEUS_WORK" VARCHAR2(12) DEFAULT ' ' NOT NULL ,
"STEUS_FRMD" VARCHAR2(12) DEFAULT ' ' NOT NULL , "STEUS_PRIM" VARCHAR2(12)
DEFAULT ' ' NOT NULL , "KSTAR_COST" VARCHAR2(30) DEFAULT ' ' NOT NULL ,
"KSTAR_SERV" VARCHAR2(30) DEFAULT ' ' NOT NULL , "STEUS_SERV" VARCHAR2(12)
DEFAULT ' ' NOT NULL , "DAUNE" VARCHAR2(9) DEFAULT ' ' NOT NULL , "ARBEH"
VARCHAR2(9) DEFAULT ' ' NOT NULL , "WAERS" VARCHAR2(15) DEFAULT ' ' NOT NULL ,
"SLWID" VARCHAR2(21) DEFAULT ' ' NOT NULL , "LVARI" VARCHAR2(6) DEFAULT ' ' NOT
NULL , "INDET" VARCHAR2(3) DEFAULT ' ' NOT NULL , "BUKRS" VARCHAR2(12) DEFAULT '
' NOT NULL , "AOB_KEY" VARCHAR2(3) DEFAULT ' ' NOT NULL , "VORNR_DEL" VARCHAR2
(12) DEFAULT ' ' NOT NULL , "TERKZ" VARCHAR2(3) DEFAULT ' ' NOT NULL , "AUART"
VARCHAR2(12) DEFAULT ' ' NOT NULL , "WERKS" VARCHAR2(12) DEFAULT ' ' NOT NULL ,
"DISPO" VARCHAR2(9) DEFAULT ' ' NOT NULL , "RSCHL_OFER" VARCHAR2(18) DEFAULT ' '
NOT NULL , "RSCHL_OFRD" VARCHAR2(18) DEFAULT ' ' NOT NULL , "RSCHL_UFER"
VARCHAR2(18) DEFAULT ' ' NOT NULL , "RSCHL_UFRD" VARCHAR2(18) DEFAULT ' ' NOT
NULL , "RSCHL_OCST" VARCHAR2(18) DEFAULT ' ' NOT NULL , "RSCHL_UCST" VARCHAR2(18)
DEFAULT ' ' NOT NULL , "GR_PRF_GR" VARCHAR2(12) DEFAULT ' ' NOT NULL ,
"GR_PRF_NAM" VARCHAR2(36) DEFAULT ' ' NOT NULL , "FHORI" VARCHAR2(9) DEFAULT ' '
NOT NULL , "NETSTUFE" VARCHAR2(6) DEFAULT '00' NOT NULL , "VAGRP" VARCHAR2(9)
DEFAULT ' ' NOT NULL , "MSGTY" VARCHAR2(3) DEFAULT ' ' NOT NULL , "AOB_DARST"
VARCHAR2(3) DEFAULT ' ' NOT NULL , "VRG_DARST" VARCHAR2(3) DEFAULT ' ' NOT NULL ,
"NO_DISP" VARCHAR2(3) DEFAULT ' ' NOT NULL , "COLKZ_ELEM" VARCHAR2(33) DEFAULT '
' NOT NULL , "COLKZ_TEIL" VARCHAR2(33) DEFAULT ' ' NOT NULL , "COLKZ_MLST"
VARCHAR2(33) DEFAULT ' ' NOT NULL , "COLKZ_DOKU" VARCHAR2(33) DEFAULT ' ' NOT
NULL , "COLKZ_MAT" VARCHAR2(33) DEFAULT ' ' NOT NULL , "VSPRF" VARCHAR2(21)
DEFAULT ' ' NOT NULL , "CLASF" VARCHAR2(3) DEFAULT ' ' NOT NULL , "PROFILE_ID"
VARCHAR2(30) DEFAULT ' ' NOT NULL , "BALK_PROF" VARCHAR2(36) DEFAULT ' ' NOT NULL
, "KBED" VARCHAR2(3) DEFAULT ' ' NOT NULL , "KKALKR" VARCHAR2(3) DEFAULT ' ' NOT
NULL , "LSTVAR" VARCHAR2(36) DEFAULT ' ' NOT NULL , "MATKL" VARCHAR2(27) DEFAULT
' ' NOT NULL , "MATEXIT" VARCHAR2(3) DEFAULT ' ' NOT NULL , "EKGRP" VARCHAR2(9)
DEFAULT ' ' NOT NULL , "MATKL_FRMD" VARCHAR2(27) DEFAULT ' ' NOT NULL ,
"EKGRP_FRMD" VARCHAR2(9) DEFAULT ' ' NOT NULL , "POSNR_MAT" VARCHAR2(12) DEFAULT
'0000' NOT NULL , "SCHED_END" VARCHAR2(3) DEFAULT ' ' NOT NULL , "SCEND_ACT"
VARCHAR2(3) DEFAULT ' ' NOT NULL , "NT_SEARCH1" VARCHAR2(6) DEFAULT ' ' NOT NULL
, "NT_SEARCH2" VARCHAR2(6) DEFAULT ' ' NOT NULL , "NT_SEARCH3" VARCHAR2(6)
DEFAULT ' ' NOT NULL , "MFLIC" VARCHAR2(9) DEFAULT ' ' NOT NULL , "MEINH_FRMD"
VARCHAR2(9) DEFAULT ' ' NOT NULL , "MEINH_SERV" VARCHAR2(9) DEFAULT ' ' NOT NULL
, "KSTAR_MATVORPL" VARCHAR2(30) DEFAULT ' ' NOT NULL , "KZERB" VARCHAR2(3)
DEFAULT ' ' NOT NULL , "VALID" VARCHAR2(21) DEFAULT ' ' NOT NULL , "VALID_VG"
VARCHAR2(21) DEFAULT ' ' NOT NULL , "SUBST" VARCHAR2(21) DEFAULT ' ' NOT NULL ,
"SUBST_VG" VARCHAR2(21) DEFAULT ' ' NOT NULL , "FPART" VARCHAR2(6) DEFAULT ' '
NOT NULL ) TABLESPACE PSAPIDE STORAGE (INITIAL 65536 NEXT 0000000040K MINEXTENTS
0000000001 MAXEXTENTS 2147483645 PCTINCREASE 0 ) )
DbSlExecute: rc = 99
(SQL error 604)
error message returned by DbSl:
ORA-00604: error occurred at recursive SQL level 2
ORA-04031: unable to allocate 4040 bytes of shared memory ("shared pool","select
i.obj#,i.ts#,i.file#,...","Typecheck","seg:kggfaAllocSeg")
(DB) INFO: disconnected from DB
E:\usr\sap\IDE\SYS\exe\run/R3load.exe: job finished with 1 error(s)
E:\usr\sap\IDE\SYS\exe\run/R3load.exe: END OF LOG: 20081201200843
SAPAPPL0.log:
(DB) INFO: PA0398~0 created #20081201200124
(DB) INFO: PA0399 created #20081201200124
(IMP) INFO: import of PA0399 completed (12 rows) #20081201200124
DbSl Trace: Error in exec_immediate()
DbSl Trace: ORA-4031 occurred when executing SQL statement (parse error offset=0)
(DB) ERROR: DDL statement failed
(CREATE UNIQUE INDEX "PA0399~0" ON "PA0399" ( "MANDT", "PERNR", "SUBTY",
"OBJPS", "SPRPS", "ENDDA", "BEGDA", "SEQNR" ) TABLESPACE PSAPIDE STORAGE (INITIAL
0 NEXT 0000000080K MINEXTENTS 0000000001 MAXEXTENTS 2147483645 PCTINCREASE 0 ) )
DbSlExecute: rc = 99
(SQL error 4031)
error message returned by DbSl:
ORA-04031: unable to allocate 4120 bytes of shared memory ("shared pool","CREATE
UNIQUE INDEX "PA0399~...","Typecheck","kgghteInit")
(DB) INFO: disconnected from DB
E:\usr\sap\IDE\SYS\exe\run/R3load.exe: job finished with 1 error(s)
E:\usr\sap\IDE\SYS\exe\run/R3load.exe: END OF LOG: 20081201200129 -
After I installed Oracle 8i Enterprise Edition on Win XP, default datanase was not creates so i tried manually creating it but it flashed this error while logging.
Microsoft Windows XP [Version 5.1.2600]
(C) Copyright 1985-2001 Microsoft Corp.
C:\Documents and Settings\oracle>SQLPLUS
SQL*Plus: Release 8.1.7.0.0 - Production on Wed Apr 30 20:09:50 2003
(c) Copyright 2000 Oracle Corporation. All rights reserved.
Enter user-name: INTERNAL
Enter password:
ERROR:
ORA-01031: insufficient privileges
Enter user-name: SYSTEM
Enter password:
ERROR:
ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not existU r getting ORA-01034 and ORA-27101 because ur database has not started.
try connecting svrmgrl as below
go to command prompt
svrmgrl
connect internal
startup pfile=<pfilename with full path>
Now logon to sqlplus and try to connect as system. -
How to resolve ora error ORA-00604 and ORA-00036.
I am getting this error in alert.log:
ORA-00604: ERROR OCCURED AT RECURSIVE SQL LEVEL 51
ORA-00036: MAXIMUM NUMBER OF RECURSIVE SQL LEVELS (50) EXCEEDED.Did someone create an 'after servererror' trigger?
http://asktom.oracle.com/pls/asktom/f?p=100:11:0::::P11_QUESTION_ID:4018285967344
Read the part where he provides a query to find the trigger:
select owner, trigger_name
from dba_triggers
where trigger_type = 'AFTER EVENT'; -
Work around/Alternate solution for Oracle error ORA-01460 and ORA-02063
After the installation of Oracle.DataAccess version 2.111.7.20, I get the following error.(the code worked fine with Oracle.DataAccess version 9.2.0.700 )
I have attached the error as well as the sample code.
ORA-01460 and ORA-02063 are known bugs in the new ODP but would like to know if there is any Work around/Alternate solution for this problem(other than
the use of stored procs)..
Thanks!
Error:
ORA-01460: unimplemented or unreasonable conversion requested
ORA-02063: preceding line from BSREAD_STAGINGRO at Oracle.DataAccess.Client.OracleException.HandleErrorHelper(Int32 errCode, OracleConnection conn, IntPtr opsErrCtx, OpoSqlValCtx* pOpoSqlValCtx, Object src, String procedure, Boolean bCheck)
at Oracle.DataAccess.Client.OracleException.HandleError(Int32 errCode, OracleConnection conn, String procedure, IntPtr opsErrCtx, OpoSqlValCtx* pOpoSqlValCtx, Object src, Boolean bCheck)
at Oracle.DataAccess.Client.OracleCommand.ExecuteReader(Boolean requery, Boolean fillRequest, CommandBehavior behavior)
at Oracle.DataAccess.Client.OracleCommand.ExecuteReader()
SampleCode
private bool isValidFieldData(string clientName, string fieldNumber, string uniqueID, string clientID)
using (OracleConnection mBSConnection = new OracleConnection(mBSConnectionString))
OracleDataReader oRdr = null;
OracleCommand Valid_FieldData_Command = null;
try
Valid_FieldData_Command = new OracleCommand();
Valid_FieldData_Command.Connection = mBSConnection;
Valid_FieldData_Command.CommandText = "SELECT uniqueid FROM EXTDB.BSData WHERE agencyid = :agencyid and agencyname=:agencyname AND fieldnumber =:fieldnumber AND uniqueid = :uniqueid";
Valid_FieldData_Command.Parameters.Add(":agencyid", OracleDbType.Varchar2, 255).Value = agencyID;
Valid_FieldData_Command.Parameters.Add(":agencyname", OracleDbType.Varchar2, 255).Value = agencyName;
Valid_FieldData_Command.Parameters.Add(":fieldnumber", OracleDbType.Varchar2, 255).Value = fieldNumber;
Valid_FieldData_Command.Parameters.Add(":uniqueid", OracleDbType.Varchar2, 255).Value = uniqueID;
mBSConnection.Open();
oRdr = Valid_FieldData_Command.ExecuteReader(); ->Error occurs here
The error occurs whenever the length of any of the parameter is increased. But there is no specific length where it is breaking down.
For example in this case, it breaks down with the given error if
agencyID > 8
agencyName > 6
fieldNumber > 9
uniqueid > 6The problem was mapping input parameter type.
VARCHAR2-type mapping input parameter works with String-type PF parameter. But CHAR-type won't. -
ORA-01843 and ORA-02291 when installing AIA 2.0 on Linux server
Hello,
When installing AIA 2.0 on a RHEL 4.7 Linux server, even if OUI does say the installion is successful, the installActions log are not that good...
We've got some ORA-01843 and ORA-02291 errors when running the createDiagnosticsCAVSData.sql.
[exec] createBSRIntegScenarioTables:
[exec] [echo] ----Creating createCAVSTables--------------
[exec] [sql] Executing resource: /exec/applis/tbaia/products/AIA/seeddata/DatabaseObjects/createBSRIntegScenarioTables.sql
[exec] [sql] 152 of 152 SQL statements executed successfully
[exec]
[exec] createDiagnosticsCAVSData:
[exec] [echo] ----Creating createCAVSTables--------------
[exec] [sql] Executing resource: /exec/applis/tbaia/products/AIA/seeddata/DatabaseObjects/createDiagnosticsCAVSData.sql
[exec] [sql] Failed to execute: Insert into CAVS_DEFINITIONS (DEFINITION_ID,TYPE,DESCRIPTION,STATE,SERVICE_TYPE,URL_WSDL,URL_ENDPOINT,SOAP_ACTION,SOAP_TRANSPORT_TYPE,MESSAGE_REQUEST,MESSAGE_RESPONSE,DELAY,VERSION,PROJECT_NAME,PROJECT_VERSION,EBS_NAME,EBS_VERSION,PROCESS_NAME,PROCESS_VERSION,SERVICE_NAME,SERVICE_VERSION,MESSAGE_NAME,MESSAGE_VERSION,PIP_NAME,PIP_VERSION,APPLICATION_NAME,APPLICATION_VERSION,TEST_PRIORITY,REFERENCE_ID_EXTERNAL,AUDITED_ON,AUDITED_BY) values (501,'Test','BPEL Transformation Diagnostics','Unlocked','Synchronous',null,'http://dvedvb40:7777/orabpel/default/AIADiagnosticsTransformBpelProcess/1.0','process','HTTP','<soap:Envelope xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/"> <soap:Body xmlns:ns1="http://xmlns.oracle.com/BRM/schemas/BusinessOpcodes"> <ns1:PCM_OP_BILL_DEBIT_inputFlist> <ns1:BAL_GRP_OBJ>Test</ns1:BAL_GRP_OBJ> <ns1:DEBIT elem="523"> <ns1:BAL_OPERAND>1000</ns1:BAL_OPERAND> <ns1:TYPE>881</ns1:TYPE> </ns1:DEBIT> <ns1:DESCR>Sample Input</ns1:DESCR> <ns1:END_T>2007-07-31T12:00:00.000+5:30</ns1:END_T> <ns1:POID>A123</ns1:POID> <ns1:PROGRAM_NAME>100</ns1:PROGRAM_NAME> <ns1:SERVICE_OBJ>NA</ns1:SERVICE_OBJ> <ns1:SESSION_OBJ>NA</ns1:SESSION_OBJ> <ns1:START_T>2007-07-31T11:00:00.000+5:30</ns1:START_T> <ns1:STR_VERSION>527</ns1:STR_VERSION> <ns1:STRING_ID>528</ns1:STRING_ID> <ns1:SUB_BALANCES elem="530"> <ns1:CONTRIBUTOR_STR>Diagnostics</ns1:CONTRIBUTOR_STR> <ns1:ROLLOVER_DATA>1</ns1:ROLLOVER_DATA> <ns1:VALID_FROM>2007-07-31T11:00:00.000+5:30</ns1:VALID_FROM> <ns1:VALID_TO>2007-07-31T11:00:00.000+5:30</ns1:VALID_TO> </ns1:SUB_BALANCES> </ns1:PCM_OP_BILL_DEBIT_inputFlist> </soap:Body> </soap:Envelope>','<env:Envelope xmlns:env="http://schemas.xmlsoap.org/soap/envelope/"> <env:Header/> <env:Body> <PCM_OP_BILL_DEBIT_outputFlist xmlns:ns0="http://xmlns.oracle.com/BRM/schemas/BusinessOpcodes" xmlns="http://xmlns.oracle.com/BRM/schemas/BusinessOpcodes"> <ns0:POID>Transformed POID value : A123</ns0:POID> <ns0:RESULTS elem="Transformed Element value : 523"/> </PCM_OP_BILL_DEBIT_outputFlist> </env:Body> </env:Envelope>',null,0,null,null,null,null,'Diagnostics Transformation',null,'DiagTransformationBPEL','1.0',null,null,'AIA Diagnostics',null,null,null,null,null,to_date('01-OCT-07','DD-MON-RR'),'oc4jadmin')
[exec] [sql] java.sql.SQLException: ORA-01843: not a valid month
[exec] [sql] Failed to execute: Insert into CAVS_DEFINITION_NSXPATHS (DEFINITION_ID,NAMESPACE_ALIAS,NAMESPACE) values (501,'env','http://schemas.xmlsoap.org/soap/envelope/')
[exec] [sql] java.sql.SQLException: ORA-02291: integrity constraint (AIA.DEFINITION_NSXPATHS_D_FK) violated - parent key not found
[exec] [sql] *1 of 43 SQL statements executed successfully*
Any advice to solve this issue?
Thanks in advance.
Regards,
K.
Edited by: KaRiNe_Fr on 3 juin 2009 01:55 createDiagnosticsCAVSData.sql instead of createBSRIntegScenarioTables.sql...Hello,
me again...
Is this table CAVS_DEFINITIONS important to be populated for the rest of the AIA installation?
The installation keeps on failing and it is a real issue for us...
If of any use, here are some results from SQL requests onto our AIA database:
SQL> SELECT * FROM NLS_DATABASE_PARAMETERS ;
PARAMETER VALUE
NLS_LANGUAGE AMERICAN
NLS_TERRITORY AMERICA
NLS_CURRENCY $
NLS_ISO_CURRENCY AMERICA
NLS_NUMERIC_CHARACTERS .,
NLS_CHARACTERSET WE8ISO8859P15
NLS_CALENDAR GREGORIAN
NLS_DATE_FORMAT DD.MM.YYYY
NLS_DATE_LANGUAGE AMERICAN
NLS_SORT BINARY
NLS_TIME_FORMAT HH.MI.SSXFF AM
PARAMETER VALUE
NLS_TIMESTAMP_FORMAT DD-MON-RR HH.MI.SSXFF AM
NLS_TIME_TZ_FORMAT HH.MI.SSXFF AM TZR
NLS_TIMESTAMP_TZ_FORMAT DD-MON-RR HH.MI.SSXFF AM TZR
NLS_DUAL_CURRENCY $
NLS_COMP BINARY
NLS_LENGTH_SEMANTICS BYTE
NLS_NCHAR_CONV_EXCP FALSE
NLS_NCHAR_CHARACTERSET AL16UTF16
NLS_RDBMS_VERSION 10.2.0.4.0
20 rows selected.
SQL> select to_date('01-OCT-07','DD-MON-RR') from dual;
TO_DATE('
01-OCT-07
Regards,
KaRiNe.
Edited by: KaRiNe_Fr on 3 juin 2009 01:59 -
ORA-00604 and ORA-12705 when adding datasource in Mapviewer
Hi,
I am trying to add a datasource using standalone OC4J Mapviewer and I'm having some problems.
I'm using Oracle8i on Windows 2000 Server. Windows 2000 is in Spanish.
When I add the datasource I get the following XML error
<?xml version="1.0" encoding="UTF-8" ?>
<oms_error>Message:[MapperConfig] no se puede agregar el origen de datos de mapa. Wed Oct 12 21:29:58 ART 2005 Severity: 0 Description: at oracle.lbs.mapserver.core.MapperConfig.addMapDataSource(MapperConfig.java:528) at oracle.lbs.mapserver.MapServerImpl.addMapDataSource(MapServerImpl.java:308) at oracle.lbs.mapserver.oms.addDataSource(oms.java:937) at oracle.lbs.mapserver.oms.doPost(oms.java:329) at javax.servlet.http.HttpServlet.service(HttpServlet.java:760) at javax.servlet.http.HttpServlet.service(HttpServlet.java:853) at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:810) at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:322) at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:790) at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:270) at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:112) at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:186) at java.lang.Thread.run(Thread.java:534)</oms_error>
The part in spanish means: Map Datasource cannot be added.
In the console I get ORA-00604 and ORA-12705
I know that ora-12705 has something to do with NLS_LANG.
I put the following query in sql*plus:
select *
from v$nls_parameters
where parameter in ('NLS_LANGUAGE', 'NLS_TERRITORY', 'NLS_CHARACTERSET');
And got AMERICAN.AMERICA.WE8ISO8859P1
I also changed the NLS_LANG variables in the registry to the same characterset. (One of them was in spanish characterset).
I don't know what else to do! Pleas help!Yes, you are in the wrong forum, but it sounds like you have your environment variable (or registry entry) for ORA_NLS33 pointing at the wrong directory.
Steve
Maybe you are looking for
-
Problem with if-then-else using BI Answers dataset
Hi, I'm having issues using the if-then-else logic with a BI Answers dataset. I'm running two versions of a report - one that access the SH schema tables directly, and one that uses a BI Answers dataset based on the SH schema. My problem is with the
-
How to Ftp a Blob attachment in a table using osb service
How to Ftp a Blob attachment in a table using osb service I tried with DBadapter select it does not work ... For blob objects cant use select throws error as expected number got blob can call a stored procedure to write the file to some directory but
-
When I enter my user name and password for my e-mail account, the page won't open
My e-mail account page won't open after I enter my user name and password on the log-in page. I have vcrified with Suddenlink that my user name and password are correct.
-
MP Navigator crashing upon quit
Whenever I quit MP navigator from scanning with my Canon printer I get a crash message looking like this: Process: MP Navigator EX 2.0 [175] Path: /Applications/Canon Utilities/MP Navigator EX 2.0.app/Contents/MacOS/MP Navigator EX 2.0 Identifier: jp
-
Out of ammunition on this one: I have Photoshop Elements 10 installed on 2 different, but very similarly configured, XP (SP3) machines. The issue involves the editor and accessing "file info" when a .jpg is displayed. On one machine, the file info bo