4400G RS232 code for Samsung monitor 460MX-3

Hi,
can some one help me on how to sent rs232 command to samsung monitor 460MX-3, i just want to sent command from the control power on and power off to the monitor.
i have:
1. eanble the dmp RS232 control supported,non dmtech.. option. from the dmm
2. connect a cross serial cable to the sumsung monitor from the dmp.
i tried to turn the monitor off using this code rs232.tx_hex=0x11x0 but it doest work.
help.
Best Regards
Andrew

I believe you must us a null modem cable to connect the DMP to any display. Can you verfiy?
The Cisco branded TVs are the DX model by Samsung so the same code to turn off the monitor for the Cisco TVs should work for the Samsung.
We have both Cisco and Samsung TVs in our shop and the I have used the Cisco power off command for both.

Similar Messages

  • RS232 Code for Samsung 400UX

    Hi everyone,  I'm looking for the RS232 code to auto on/off our samsung. I have manual about code but when try with pc or dmp. it didn't success.
    So Could anyone give me example code
    for LG Monitor turn off TV
    http://192.168.55.13:7777/set_param?rs232.tx_hex=6b61203020300D
    for Samsung Monitor turn off TV
    http://192.168.55.13:7777/set_param?rs232.tx_hex=......................................
    Thank you very much.
    Sukitti L.

    You can use a Null Modem or a RS-232 Crossed Cable.
    db9 female                                       db9 female
      5 (GND) -----------------------------------------5 (GND)
      3 (TX) ------------------------------------------2 (RX)
      2 (RX) ------------------------------------------3 (TX)
      8 (CTS) -----------------------------------------7 (RTS)
      7 (RTS) -----------------------------------------8 (CTS)
      6 (DSR) -----------------------------------------4 (DTR)
      4 (DTR)------------------------------------------6 (DSR)
    Take a look at the documentation...
    There may have been some steps you missed...
    http://www.cisco.com/en/US/docs/video/digital_media_systems/5_x/5_1/dmm/user/guide/dsm+etv.html#wp1718477
    * Connect RS-232 cable to the DMP and the LCD.
      I believe either RS-232 port should work for the LCD.  I thought the FRONT port (closet to front of TV)
      was an IN\OUT port.  And the BACK port was just an IN port.  I used the BACK port for my testing.
    * next, you NEED to ENABLE ON RS-232 controls on the DMP first.  From the DMM, issue the
      "Advanced Task--> System Task --> RS-232: Control Supported, non-DMTech displays" for the DMP(s)
      in question.   By default, RS-232 controls are disabled.
    * Create 2 new System Tasks in the Advanced Tasks Tab.
    Turn ON  - Cisco LCD = rs232.tx_hex=aa11fe010111
    Turn OFF - Cisco LCD = rs232.tx_hex=aa11fe010010
    * Once RS-232 Control is Enabled & the New System Tasks are created, You can now issue the LCD Turn On & Off
       tasks from the DMM-DSM DMP Manager.
    Note:  You can combine RS-232 commands using the "Control TV"  tool on the DMP Manager List Zone.  The "Control TV"
    is designated by the TV with Antenna Icons in the DMP List Tool bar.
    RS-232 Troubleshooting
    ======================
    - Make sure the RS-232 cable has the correct pin out.
    - Make sure RS-232 is enabled on the DMP.
    - Perform the following to make sure the cable is
      correct and the DMP is sending RS-232 commands:
    1. Connect RS-232 from the DMP to a PC
    2. Open HyperTerminal and set RS-232 settings from
       previous slide
    3. Send hex commands from the DMP though DMM-DSM
    4. You should see the hex command in your HyperTerminal
    After verifying DMP is sending the RS-232 command,
    please, check the following:
    1. The RS-232 is connected to the "IN" port and not the "OUT"
       port.
    2. Make sure monitor ID is set correct and the ID matches the
       ID in the hex command.
    3. If no ID is set, use FE, for all monitors, as the monitor ID in
       the hex command
    4. Double check the command and the check sum value.
       * Make sure each field has 2 digits
    If this answers your question, Please take time to mark thisdiscussion answered & rate the response.
    Thank You!
    T.

  • How to get an unlock code for Samsung Galaxy S3?

    How to get an unlock code for Samsung Galaxy S3?

    Unlocking your device for use on a USA carrier, is not possible.
    Maybe in the future but not now.
    You will have to purchase a new device on the other carrier.
    Unlocked for use in other countries is possible if it isn't already u locked from the factory.
    Good Luck

  • Code for Samsung airtrack soundbar

    Hi,
    Looking for remote control codes for Samsung airtrack soundbar.  I tried all the samsung codes and none work.

    Me too. I think were hosed. Maybe back to DirecTV.  Another post said if if dont have the code it never will.  I have a nice universal remote but still prefer the stock DVR remote, esp for the wife and kid.  Too bad,

  • Can't find remote control code for Samsung BD-P2550

    I am trying to configure my verizon fios remote to control my Samsung BD-P2550 using the DVD button on the remote.  None of the suggested codes work nor does search for the code using the remote and the fast forward button for infinite attempts,  PLEASE HELP!

    joebingo,
    Unfortunately the Verizon-provided universal remote will not work for all devices, particularly for advanced devices such as BR players.  If you've already tried all the Samsung DVD codes and none of those work then it's most likely that there is not going to be a working code for this particular device.
    However, you can try doing a manual code search by following the instructions here.
    Regards,
    Chris
    Christian
    Verizon Telecom
    Fiber Solution Center
    Notice: Content posted by Verizon employees is meant to be informational and does not supercede or change the Verizon Forums User Guidelines or Terms or Service, or your Customer Agreement Terms and Conditions or Plan.

  • Fix for Samsung Monitor not working after 10.6 install

    This quick fix solution worked for me. Hope it works for you:
    I have an 15inch MacBook Pro that I've just installed Snow Leopard 10.6.3 on.
    Prior to this install, I've had it hooked up to my Samsung SyncMaster 2243 via an Apple MDP/VGA adapter and a third party VGA cable. It has been flashing on and off a black screen every now and then for the past 2 years and I googled that it was just a crappy communication between the MBP and the Samsung... but now since installing 10.6.3, the Samsung display just flashes the desktop for a second then turns black for good - occationally flashing analogue/digtal prompt display. Tried everything for hours. Nothing worked, thought I was gonna have to buy a new all Apple VGA lead then came across this solution. Tried it and it worked IMMEDIATLY!!! And the monitor doesn't flash black anymore AT ALL!
    WHAT TO DO TO FIX:
    Go to => System Preferences  => Energy Saver => change graphic settings to Higher Performace.
    Cheers!!

    I figured it out.  NVIDIA has an update specifically for 10.6.8 and several of their video GPU's.  go HERE to download the driver. It also took away the slow response and flicker I was experiencing.
    Here is the update info:
    CUDA  Application Support:
      In order to run Mac OS X Applications that leverage the CUDA architecture of  the Quadro 4000 for Mac product, users will need to download and install the CUDA 4.x driver  for Mac located here.
    New in Release 256.02.25f01:
    This driver update is required if upgrading to the  latest Mac OS X v10.6.8.
    Contains performance improvements for a wide range  of applications
    Contains fixes for several corruption and crash  bugs, including issues with Autodesk Mudbox, and World of Warcraft.
    Contains support for display rotation.
    Adds Driver Archive/Restore Functionality.

  • Driver for Samsung Monitor UHD590

    I have buy a mac mini and the monitor Samsung UHD590.  But the monitor font is a little burred.  I think, the resultion is not right. Or give it a special driver???
    What can I do. ??

    Apple support article.
    Video Troubleshooting Internal and External Monitors

  • Samsung Monitor for MacBook Pro

    My husband just purchased a Samsung Monitor, model # 226BW for my MacBook Pro. The instructions for the monitor only refer to Windows with no mention of Mac OS X. Can this monitor be used with the MacBook Pro? My husband researched monitors that were supposed to be compatible with MacBook Pro and this one came up as one that would be. Thanks.

    That is completely normal behavior. How do you want to use the monitor?
    Most of what you want to adjust is in System Preferences -> Displays. If the display is on and connected, you get a separate control window on each monitor. You can control how the external display appears to connect to the laptop screen (right, left, above, below, etc.) You can also turn the display on to "mirroring" which will show the same thing on both screens.
    If you want to use the external display alone, you'll have to attach a mouse and keyboard (USB or bluetooth). Then, you can close the MBP and it'll just use the external screen.
    There shouldn't be any compatibility issues at all.

  • T. code for report (Report to Monitor Credit Limit Vs Outstanding)

    Please send me in ECC 6.0  T. code for report (Report to Monitor Credit Limit Vs Outstanding)

    Try any of these report using se38 for credit limit check.
    RFDKLI30  Credit Limit  Overvie                                   
    RFDKLI40  Credit Overview                                           
    RFDKLI41  Credit Master Sheet  (complete details)                                          
    RFDKLIAB  Display Changes to Credit Management         
    RFDKLI43   Credit Management: Master Data List     (credit exposure limit)        
    anya

  • How can i request the actual time code of digital video recorder, i am using RS232 interface for asking actual time code of digital video recording

    how can i request the actual time code of digital video recorder, i am using RS232 interface for asking actual time code of digital video recording

    If you have an RS-232 interface to the digital video recorder, it may be that you can send a command to the video recorder in order to get the time code sent back to your application - you would then read this as a string and then incorporate this data into your program.
    The best source of help will be any documentation you have relating to the serial (RS-232) interface with the digital video recorder. This documentation should have commands that you can send to the recorder and expected response strings that you should get back from the device. This task should be straightforward but can often be frustrating without documentation about the video recorder. This will not be something that you can "guess" - past experience in writing serial communication ap
    plications has shown that a good manual is your best friend.
    Failing this if you have any source code for example programs that have already been written to communicate with the recorder, you might be able to extract the relevant ASCII strings and use them within your application. This is true whether you are using LabVIEW or a text-based language.
    Jeremy

  • Different transaction codes useful for Performance Monitoring

    Hi Experts,
    Please can you guide me on this question, as to what are the different transaction codes useful for Performance Monitoring i.e. workload statistics and database statistics? What kind of statistics do each of these codes provide?
    Many thanks,
    Mithun

    Hi Mithun
    In performance issuses you need to look in terms of many ways that is..
    Workload analsys
    ST03N: Statistics Regards Locallly
    ST03G: Statistics Regards Golbally
    STAD: Individual Statistics Regards
    STATTRAACE: Individual Statistics Regards Trace
    ST07 : User Distribution
    Buffers and Memory
    ST02 : Buffers and Memory and swaps monitoring
    ST10: Table Acess
    OS Monitoring
    OS04: Locally monitoring
    OS07: Remotely monitoring
    OS01: LAN check
    DataBase Side
    ST04: Performance overview
    DB01: Exclusive locks
    DB02: Tables/Indexes
    BackgroundJobs monitor
    SM37
    other tcodes
    ST22: Abap Dumps
    SM12: Lock Entries
    SM56: NumberRange Buffers
    SU56: User Buffer
    all above transactions are need to monitor for Performance.
    Regards
    Bandla

  • Tooling for code analisis and monitoring

    I would like to know if there is a good tool for java code analisis and monitoring, and also JVM performance monitoring.
    Thanks,
    arturo

    I would suggest checking out VisualVM (https://visualvm.dev.java.net/). This integrates several tools that provide both >monitoring and profiling capabilities.
    It seams like most of the function work only on 6.0 !! Nice Tool to work

  • Where do I find my PUK Code for my PAYG T-mobile Samsung Galaxy S5

    Cannot find where my online PUK Code for T-Mobile is - the explanation on EE's page is next to useless!  As I can't currently use the phone - I'm in a jam!!!

    Look in your online a/c under Manage Device.

  • I need my unlock code for my samsung galaxy s6

    Hi, yesterday i was call to at&t for asking a bout unlock code for my phone and they say tomorrow today i will receive unlock code by email but until im still didnt get this email?? My request unlock number is:2019719605, please help me soon

    Okay, so now you have the directions and the unlock code.  You need an active, non ATT SIM card.   I unlocked my phones with the help of nice people at a T-Mobile store, or you can ask a friend with the same size sim. My email looked like this:  Unlock request number: 201#########Thank you for contacting AT&T about unlocking your mobile device.Congratulations! Here are your unlock instructions:Your unlock code is: 063#####Unlock Steps - Use Non-AT&T SIM Card1. Power off the device, remove the battery, and insert a non-AT&T SIM card.2. Re-insert the battery and power on the device with non-AT&T SIM.3. The device displays "Enter the device unlock code."4. Enter the eight-digit unlock code.5. Press OK.  So, is there another problem?

  • RS232 Pinout for DMP4400G

    I am looking for the pinout of the RS232 port on the 4400DMP. I am connecting this to the 232 port on a Samsung ME46B and the Samsung display comes with a dongle converting the DB9 to 3.5mm. I need to use a F-F DB9 cable to connect the DMP to the dongle, but I do not know if I need a straight thru or a null-modem. The Samsung side of the cable receives data on pin 2 and transmits data on pin 3 (looks like a modem). If the DMP transmits on pin 2 and receives on pin 3 (like a DTE or terminal side) I am good to go, but I cannot find any documentation on the pinout and direction of the DMP RS-232 interface.
    Thank You
    Bill Davenport

    I have been using the 9pin to mini 3.5mm that is included with the DMP4310 on the DMP4400 to conect to the ME46 & ME55 Samsung. The pin out is in the Cisco Stadium Vision PDF on page 100.
    http://www.cisco.com/en/US/docs/Sports_Entertainment/StadiumVision/Director/design/guides/3_0/SV_Video_Endpoint_DIG_3.0.pdf
    I have found several of the adapters included with the Samsung monitors don't work.

Maybe you are looking for