4404 boot error, Bad data CRC
HI,
i have a 4404 Controler and when it boots i get the error message,
Bad data CRC, i upgraded to OS 4-0-219-0 then 4-1-185-0 but now im getting the message
bzImage Image Integrity Check Failed (Bad Data CRC). Hanging
anything that i can do ?
Thanks
Dan
Try to revert back to the backup image on the controller. If this fails, it's probably bricked and you need to replace it under smartnet.
Similar Messages
-
Streaming Error: Bad Data 5402
Hi there,
Whilst receiving a stream from our server QuickTime reports the following error in the player:
- Bad Data 5402
This corresponds with:
- -5402 - qtsBadDataErr
on: http://docs.info.apple.com/article.html?artnum=24938
We have been able to re-produce this error:
- on several PC's
- in MSIE 6.0
- with firewall disabled
We know the stream is ok because the stream plays back on other computers outside of the institution.
Can anyone provide advice on how to go about resolving this problem.
Many thanks,
LloydIt looks like this isn't going to get answered then...
But does anyone have any advice on what to do if i really need help with this. Is there a telephone for Apple support?
Many thanks
- Lloyd -
Okay, I will have a window open with 4 tabs open. At first, everything is fine, but after a day or so, a message will pop up on screen saying "'''Exc in ev handl: Error: Bad NPObject as private data!'''" and after you close it out, the tab you were on will close and reopen in it's own window. I then have to shut down all both old and new windows and open a new window with my original 4 tabs again. It will work fine until a few days pass and it starts over again.
This issue can be caused by the McAfee Site Advisor extension
*https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode -
This error happens each time I use Mozilla. especially when I click on an extension or try to work in any of my e-mail accounts (Yahoo, Gmail, or RCN). Sometimes I am able to continue by just clicking OK and other times it prevents me from completing my task. This started happening right after I downloaded and installed your latest version of Firefox. I see others are having the same problem. Error message is "Exc in ev handl:Error: Bad NPObject as private data"
That issue can be caused by the McAfee Site Advisor extension
*https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode -
Exc in ev handl: Error: Bad NPObject as private data! I get this error when opening and closing tabs. It only happens when using Firefox. I am running 7.0.1 on a 64 bit version of windows. While researching this problem I discovered thousands of people have the problem. This just started recently. No real fixes or causes have been found. One solution listed was to disable McAfee site adviser which I use and have no plans to remove. I really like Firefox but if I must choose between it and Site adviser I'll have to switch to another browser.
Please see solution in http://kb.mozillazine.org/Problematic_extensions
for "McAfee Site Advisor".
(Windows): For best results you should uninstall '''McAfee Site Advisor''' from Control Panel > add/change programs (Programs and Features). Reboot the system. Then Reinstall from http://www.siteadvisor.com/ and reboot the system. When installing refuse other suggested (crapware) applications.
<br><small>Please mark "Solved" one answer that will best help others with a similar problem -- hope this was it.</small> -
In the past few days I have been getting the following popup when I use firefox as my browser: Exc in ev handl: Error: Bad NPObject as private data!
I assume it came from your latest update. I have windows vista with a 64 bit processor, and I am using the latest version of firefox. I checked to see if I was getting the same error message with explorer and I am not. It appears to be some sort of conflict with java script. Can this be corrected?re: recommendation -- "Remove McAfee Site Advisor and other extensions/plugins reported in the following lists of Blocked/Problematic extension: "
NO -- I use it to protect my surfing! Why must FireFox insist on constantly breaking 3-rd party vendor apps!?! Even IE doesn't do this.
For all the ballyhoo about FF and how great it is -- it ISN'T when it comes to how it supports other companies apps. (RealPlayer, Google, McAfee, etc.)
Shame on them. I shouldn't have to give up functionality, and in this case protection -- just to use FF -
I get the following msg's. This happening more often, and when I back out to restart it may take a couple of times so that I do not get the error msg's?
Exc in ev handl: TypeError: oSAPlg.oRoot.log is not a function
Exc in ev handl: Error: Bad NPObject as private data!This issue can be caused by the McAfee Site Advisor extension
*https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode -
ASR9K PPPoE ERROR - bad session data
In a month the second case all are disconnected Rrroyesessii and new aren't connected not to reboot a router yet.
Messages
RP/0/RSP0/CPU0:Feb 12 20:17:00.396 : pppoe_ma[378]: Bundle-Ether100.10: I dst ffff.ffff.ffff src bcee.7bed.90a0: len 46 0x11090000000c01010000010300040001000000000000000000000000000000000000000000000000000000000000
RP/0/RSP0/CPU0:Feb 12 20:17:00.396 : pppoe_ma[378]: [PADI-Recv]: Bundle-Ether100.10 peer-mac bcee.7bed.90a0
RP/0/RSP0/CPU0:Feb 12 20:17:00.396 : pppoe_ma[378]: [PADI-Recv]: vlan-id-outer 600
RP/0/RSP0/CPU0:Feb 12 20:17:00.396 : pppoe_ma[378]: [PADI-Recv]: Service-name:
RP/0/RSP0/CPU0:Feb 12 20:17:00.396 : pppoe_ma[378]: [PADI-Recv]: Host-uniq: 00010000
RP/0/RSP0/CPU0:Feb 12 20:17:00.396 : pppoe_ma[378]: Bundle-Ether100.10: O dst bcee.7bed.90a0 src e4c7.227c.ea0b: len 31 0x11070000001901010000010300040001000001020009415352394b2d424e47
RP/0/RSP0/CPU0:Feb 12 20:17:00.396 : pppoe_ma[378]: [PADO-Sent]: Bundle-Ether100.10 peer-mac bcee.7bed.90a0
RP/0/RSP0/CPU0:Feb 12 20:17:00.396 : pppoe_ma[378]: [PADO-Sent]: vlan-id-outer 600
RP/0/RSP0/CPU0:Feb 12 20:17:00.396 : pppoe_ma[378]: Bundle-Ether100.10: I dst ffff.ffff.ffff src 0860.6e24.0390: len 46 0x11090000000c01010000010300040001000000000000000000000000000000000000000000000000000000000000
RP/0/RSP0/CPU0:Feb 12 20:17:00.396 : pppoe_ma[378]: [PADI-Recv]: Bundle-Ether100.10 peer-mac 0860.6e24.0390
RP/0/RSP0/CPU0:Feb 12 20:17:00.396 : pppoe_ma[378]: [PADI-Recv]: vlan-id-outer 88
RP/0/RSP0/CPU0:Feb 12 20:17:00.396 : pppoe_ma[378]: [PADI-Recv]: Service-name:
RP/0/RSP0/CPU0:Feb 12 20:17:00.410 : pppoe_ma[378]: Bundle-Ether100.10: O dst 5404.a68e.2160 src e4c7.227c.ea0b: len 31 0x11070000001901010000010300040001000001020009415352394b2d424e47
RP/0/RSP0/CPU0:Feb 12 20:17:00.410 : pppoe_ma[378]: [PADO-Sent]: Bundle-Ether100.10 peer-mac 5404.a68e.2160
RP/0/RSP0/CPU0:Feb 12 20:17:00.410 : pppoe_ma[378]: [PADO-Sent]: vlan-id-outer 210
RP/0/RSP0/CPU0:Feb 12 20:17:00.410 : pppoe_ma[378]: Bundle-Ether100.10: I dst ffff.ffff.ffff src 5404.a6e6.81d4: len 46 0x11090000000c01010000010300040001000000000000000000000000000000000000000000000000000000000000
RP/0/RSP0/CPU0:Feb 12 20:17:00.410 : pppoe_ma[378]: [PADI-Recv]: Bundle-Ether100.10 peer-mac 5404.a6e6.81d4
RP/0/RSP0/CPU0:Feb 12 20:17:00.410 : pppoe_ma[378]: [PADI-Recv]: vlan-id-outer 32
RP/0/RSP0/CPU0:Feb 12 20:17:00.410 : pppoe_ma[378]: [PADI-Recv]: Service-name:
RP/0/RSP0/CPU0:Feb 12 20:17:00.410 : pppoe_ma[378]: [PADI-Recv]: Host-uniq: 00010000
RP/0/RSP0/CPU0:Feb 12 20:17:00.410 : pppoe_ma[378]: Bundle-Ether100.10: O dst 5404.a6e6.81d4 src e4c7.227c.ea0b: len 31 0x11070000001901010000010300040001000001020009415352394b2d424e47
RP/0/RSP0/CPU0:Feb 12 20:17:00.410 : pppoe_ma[378]: [PADO-Sent]: Bundle-Ether100.10 peer-mac 5404.a6e6.81d4
RP/0/RSP0/CPU0:Feb 12 20:17:00.518 : pppoe_ma[378]: Bundle-Ether100.10: I dst ffff.ffff.ffff src 60a4.4c8c.8ddc: len 46 0x11090000000c01010000010300040001000000000000000000000000000000000000000000000000000000000000
RP/0/RSP0/CPU0:Feb 12 20:17:00.518 : pppoe_ma[378]: [PADI-Recv]: Bundle-Ether100.10 peer-mac 60a4.4c8c.8ddc
RP/0/RSP0/CPU0:Feb 12 20:17:00.518 : pppoe_ma[378]: [PADI-Recv]: vlan-id-outer 60
RP/0/RSP0/CPU0:Feb 12 20:17:00.518 : pppoe_ma[378]: [PADI-Recv]: Service-name:
RP/0/RSP0/CPU0:Feb 12 20:17:00.518 : pppoe_ma[378]: [PADI-Recv]: Host-uniq: 00010000
RP/0/RSP0/CPU0:Feb 12 20:17:00.518 : pppoe_ma[378]: [PADI-Recv]: ERROR - bad session data
RP/0/RSP0/CPU0:Feb 12 20:17:00.518 : pppoe_ma[378]: Bundle-Ether100.10: O dst 60a4.4c8c.8ddc src e4c7.227c.ea0b: len 31 0x11070000001901010000010300040001000001020009415352394b2d424e47
ASR9001
Cisco IOS XR Software, Version 5.1.1[Default]
Copyright (c) 2014 by Cisco Systems, Inc.
ROM: System Bootstrap, Version 2.04(20140227:092320) [ASR9K ROMMON]
How to fight against it? before such it wasn't noticedhi vladimir,
I checked the source code when this error is set. this is seen when a session stage packet is received that has no valid idb (aka subscriber interface) for the session ID that was found in the packet together with the vlan tags.
Now this is a PADI, so it is not a session packet to start with.
Next I see that the function that sets this error is only called for on data packets when the opcode is 0x00 in your case the opcode is 0x09 which is a PADI.
what I am thinking that is happening here is that the punt software has provided incorrect pointers to the start of the packet due to a sw bug.
I would like to request if you can evaluate xr513 for this as I see some fixes in 512/513 relating to the punt handling sw that might be of benefit here.
regards
xander -
Exc in ev handl: Error: Bad NPObject as private data
This is the pop up that keeps annoying me in FF. You send me the question: The box that the error is in says something about JavaScript?
I´m answering NO!This issue can be caused by an extension that isn't working properly (McAfee Site Advisor).
*https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode -
Very simple- the following error message appears when I open a new tab, either with a web page or blank:
Exc in ev handl: Error: Bad NPObject as private data!Please see solution in http://kb.mozillazine.org/Problematic_extensions
for "McAfee Site Advisor".
(Windows): For best results you should uninstall '''McAfee Site Advisor''' from Control Panel > add/change programs (Programs and Features). Reboot the system. Then Reinstall from http://www.siteadvisor.com/ and reboot the system. When installing refuse other suggested (crapware) applications.
<br><small>Please mark "Solved" one answer that will best help others with a similar problem -- hope this was it.</small> -
I never had this problem till had to down load the new Firefox, now i get this message rather closing a page or opening it..
Exc in ev handi: Error: Bad NPObject as private data. what can i do//????Disable McAfee siteadvisor and check the problem still persist or not?
-
Exc in ev handl: Error: Bad NPObject as private data!
Please see solution in http://kb.mozillazine.org/Problematic_extensions
for "McAfee Site Advisor".
(Windows): For best results you should uninstall '''McAfee Site Advisor''' from Control Panel > add/change programs (Programs and Features). Reboot the system. Then Reinstall from http://www.siteadvisor.com/ and reboot the system. When installing refuse other suggested (crapware) applications.
<br><small>Please mark "Solved" one answer that will best help others with a similar problem -- hope this was it.</small> -
Unable to install. The stub received ve bad data error
how to fix error unable to install. The stub received ve bad data error in windows 8 operating system while installing HP printer driver
Dear Customer,
Welcome and Thank you for posting your query on HP Support Forum
Please click on the below shown link to troubleshoot the issue
http://answers.microsoft.com/en-us/windows/forum/windows8_1-performance/the-stub-received-bad-data-e...
Hope this helps, for any further queries reply to the post and feel free to join us again
**Click the KUDOS star on left to say Thanks**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.
Thank You,
K N R K
Although I am an HP employee, I am speaking for myself and not for HP -
Exc in ev handl: Error: Bad NPObject as private data! Why do I get this message when browsing?
Troubleshooting extensions and themes
* https://support.mozilla.com/en-US/kb/Troubleshooting%20extensions%20and%20themes
Check and tell if its working. -
Cada vez que abro una página web me aparece el siguiente mensaje: Exc in ev handl: Error: Bad NPObject as private data! ¿cómo puede arreglarlo?
Please see solution in http://kb.mozillazine.org/Problematic_extensions
for "McAfee Site Advisor".
(Windows): For best results you should uninstall '''McAfee Site Advisor''' from Control Panel > add/change programs (Programs and Features). Reboot the system. Then Reinstall from http://www.siteadvisor.com/ and reboot the system. When installing refuse other suggested (crapware) applications.
<br><small>Please mark "Solved" one answer that will best help others with a similar problem -- hope this was it.</small>
Maybe you are looking for
-
Has this happen to anyone before? Will I be able to get my music, or money back?
-
Table For Purchase Order Version Number and Version Created Date
Dear Sir, Whenever we make any change in Purchase Order , then a new Version Number along with Created Date is assigned . In Me23n the Version Number and It's Created date is also displayed ( at PO Header Level) . We request you to kindly guide us a
-
Open Firmware password works or doesn't work on MBP?
I'm confused... This article describes how to set up Open Firmware Password on Macs, including, Intel-based Macs and even states what OFP disables on Intel-based Macs when enabled: http://docs.info.apple.com/article.html?artnum=106482 just to finish
-
Apple TV - iTunes Store Password
My Apple TV continues to request my password, even though it's correct. What do do?
-
Dear All, I have mantained Business Place & Section code for the MIRO Documents, but wen i am doing J1inchln its not getting captured , its giving Error "No unpaid tax lines exist for the given selection criteria" please guide me where i am going wr