4G future devices

I was just wondering and please excuse me if this has been addressed. I know that the smart phones are going to eventually all be 4G. Will eventually all Verizon be 4G. Or is it only smart phones that will be 4G. I have a smart phone right now and like it but not crazy about it. I just don't use web very much. I have the $15 still and am thinking about when I am eligible for a new phone getting a 4G feature phone, if feature phones are going to be 4G.

To my knowledge, Verizon has not announced anything, so any answer will likely just be speculation.
Now that that's out of the way, I'd imagine that you can look to what VZW did with 3G to get an idea of the direction going forward. Even though 1xRTT ("1G") is still available, Verizon made 3G available on feature phones. Given this, I would imagine that 4G will be available on feature phones at some point in the future.

Similar Messages

Will there be a BlackBerry Classic like device in the Future?

Will there be a BlackBerry Classic like device in the Future?
Solved!
Go to Solution.

Hi @blane936, we cannot comment on future devices. Thanks!

Cisco nexus 6001 not a supported device on cisco prime infrastructure 2.1?

I have installed Cisco Prime Infrastructure 2.2 and Prime Infrastructure still doesn't seem to support the Nexus 6001 platform? Can someone tell me if Cisco Prime Infrastructure will ever support the Cisco Nexus 6001 platform or is there any plans to support it in any future device packs?

The Nexus 6001 isn't currently supported in PI 2.1. There's no workaround except to wait for a device or product update that adds support. Right now I know the 9000 series is on the 2.2 roadmap but I haven't seen any reference to the 6001 and PI.
Interestingly, Prime LMS does support both the 6001 and 6004. Reference.

LMS 3.2 some devices appear by IP not hostname

dears
i've problem in LMS 3.2 that some devices appear in RME by ip not hostname although they are in HOSTS file !
i tried to use resolver.pl tool and it can fetch the host name when typing the ip but devices still appearing by ip !
i'm using Comon Services 3.3

The device which are already in LMS DCR would stay as it is, if they are added by IP already.
If you are sure all the devices are in hosts file, than you should modify your scheduled discovery job for Update DCR Display Name check box.
Select this checkbox if you want to update the display name of the devices that already exist in DCR, in the next Device Discovery cycle.
For example, consider a device which is discovered by Common Services Device Discovery, exists in DCR with the display name as its hostname.
If you change the Preferred DCR Display Name as IP Address for the next Device Discovery, Common Services Device Discovery will update the display name of the device as its IP Address in DCR after the next Device Discovery.
The display name of devices are not overwritten in the future Device Discovery cycles if you have not selected this option.
For more details check :
http://www.cisco.com/en/US/docs/net_mgmt/ciscoworks_common_services_software/3.3/user/guide/dcr.html#wp1469536
-Thanks

I am a royal iPad was stolen .. how can disable the device?

I am a royal iPad was stolen .. how can disable the device?

You might find this page useful if you enable the feature and want to use it to find your device.
http://support.apple.com/kb/PH2696
Useful for the poster's future devices. It cannot be enabled on a device that has been stolen.

Brand New Iphone 4 won't appear on device listing

I've just got a new iPhone 4 and I plugged it in to my computer to initially register it for use but my computer would read the phone but iTunes wouldn't register it on the device list.
I brought it to work today and it worked fine. Came home and tried a number of things such as removing iTunes and not restarting etc. I've been at it for nearly 2 days now and I'm none the wiser. I've just got no idea what to do with it. It charges on the computer, it appears on the computer as being an iPhone but iTunes won't do a thing with it.

I bought it custom built from overclockers and it only had the operating system and updated drivers with it. I don't think it could be that. I've looked after it well. My friend had a jailbroken phone registered on my iTunes for awhile would that have had any conflict with iTunes for future devices connected to it at all?

Reset encryption password for NEW iPhone backups

Hello Everyone,
I have an iPhone and iPad which are currently working perfectly. However during testing I figured out that I somehow lost my iTunes backup encryption password. As such I figured I would just change the backup password, delete the old backups, and create NEW backups for which I do know the password to and all would be good (and ready for a future device failure.)
However it appears that iTunes will not allow you to change or disable the encryption password for NEW backups without first knowing the old encryption password. Does anyone know if a way around this?
Thank you for your time.

Thanks!

I just wanted to say I am sorry and clarify the situation as it was clarified for me yesterday... Great experience with Palm Customer Support.

I called Sprint yesterday and was treated terribly by tech support because I didn't want to switch devices. They as much as called me outright stupid for wanting to stay with my Palm Pre. Even though they agreed that all four phones were broken out of the box and that I was not at fault. They refused to help on the basis that Palm Pre's were being recalled and no longer would be available at Sprint. I was so upset that I called Palm immediately and found that to be untrue. Thankfully. Despite all the issues I had, I don't believe it was Palm's fault. I believe the Authorized Retailers were selling refurbished phones as new. Especially after finding out that my husbands' Samsung Moment had over 400 hours of talk time a week after he bought the phone. So, after being lied to by Sprint, I called Palm and the Tech's were very helpful and very empathetic and are sending me a replacement phone. They waived the fee since this is to be my 5th replacement and I was extremely surprised at how helpful they were.
Further, this morning I got a phone call from an unknown number... which I almost didn't answer but I did and it turned out to be a Palm Corporate Customer Service Rep who had read some of my "rants" on here. He apologized and we talked for a while about the problems I had with R**** $&*** and Sprint. He then offered to replace the Touchstone I had purchased earlier this month and offered to call me after I receive the replacement and the TS kit to make sure there was no problems... which I believe he will. SO, I am a person who is very happy with Palm. If I am wrong, I will say I am wrong... especially if my experiences could had given people pause about buying this phone. I am sorry. It is truly a great company, who does care about their customers and their opinions.
So, if you do end up being one of the few people who have an issue. Try Sprint once and if they don't fix the problem... call Palm and they will take care of you. I got caught up in a cycle of reading other people examples (and who knows how much a situation is exaggerated) and expected to receive horrible service from Palm. But I didn't and I am glad that I stuck with them.
If anyone reading had a similiar experience from Palm where they went above and beyond the call of duty to restore your faith in the company... please post if you have the time. Thanks again

I am sorry if I didn't explain clearly but Radioshack is the first place I bought my phone from... as an authorized retailer I assumed that if it was new, it wouldn't be broken... but after the first two, I got online and found another story where Radioshack got caught selling a refurb Palm Pre as new. The guy bought it took it home and it had some defect (that I can't remember) and when he went to Pandora App, he found that the previous owner had signed in and it hadn't been cleared out. So.... I don't know... but I agree with you because you still see the problem clearly. Sprint acts as though they are supportive of Palm, but if you have the slightest issue, they throw Palm under the bus and won't back a far superior product. I do agree that there are some issues with the Palm build, but I think that it has more to do with the owner than anything. If you have the time and ability to take care with your Pre, then it will probably last longer than someone who just jams the charger in the port or anyone who doesn't baby the phone 97% of the time. I am sure some people are going to say that you shouldn't have to take sure care with a phone and I agree, but unfortunately that is just the case for now. I have faith that the next webOS device is going to be of a spectacular and solid build quality. And the rep that called me about the charger kit said some about a future device, I don't know if he was just talking in general or if there is actually a device in the makings but I hope so!
http://forums.precentral.net/palm-pre/240804-still-my-1st-pre-proud.html#post2368881
I know there was a post on precentral that talked about who was on their first Palm Pre's and the number was surprising high. I just know that I am still waiting on my replacement from Pre and they could have very easily just grabbed a refurb and threw it in a box to be shipped. But I was assured that a tech was going to inspect the device before it was sent to me and it was shipped two days after my order. So, hopefully dealing with Palm rather than Sprint will be the deciding factor that allows me to finally have a great model of the Pre with no prior issues out of the box. I just hope that there is a new Palm webOS device when I able to upgrade in a year or so. Above is the link for the forums regarding owners who are still on number one, alot of them launch day Pre's. Thanks for your response. Can't wait till Monday

Ihab's Lenovo K900 Review

Hello everyone How are you all doing? I just finished the write up of the Lenovo K900 Reivew. I hope you like it, and if you would like to see larger/full resolution images of the ones posted here you can check out the review over at ihabstech.com. Enjoy!
Yes, Lenovo make smartphones worldwide now. I thought that would be an appropriate opening since I keep getting the question mark look on people’s faces when looking at the phone placed in front of me and then ask “Lenovo make phones?”.
At first I didn’t even realize they had phones and when I did, I was surprised they actually had quite a decent range. Not only that, they had their own Lenovo UI of Android. It seems they have been working really hard to get great devices out and guess which device I managed to get my hands on? The flagship. How exciting! So, lets take a look at this phone.
That is not a perfectly angled shot to make the device appear really thin.. Okay it is, but the device really is thin! it’s stated at 6.9mm only!
Quick Spec Sheet
You have to re-think your understanding of big phones with the K900, the dimensions are 157 x 78 x 6.9 mm! So it is pretty huge, but in exchange for carrying the sizeable device (or phablet if you want to call it that) you get a 5.5 inch Full HD IPS screen with about 400 PPI with the screen resolution of 1920×1080 (It is very responsive and even recognizes use with fingernails and pens) above the screen sits an aray of sensors and a 2MP fixed-focus camera. Taking a step deeper into the device, we find an Intel® Atom™ Z2760 Dual Core™ 4-thread processor running up to 2.0 GHz with 2GB of RAM. The graphics centre is an Intel® GMA graphics with 533MHz clock, and both assist in running Android 4.2.1. All this powerful hardware comes in a Brushed Stainless Steel, Polycarbonate and Corning® Gorilla® Glass 2 package that weighs 162 grams. On the back is the 13MP camera with auto-focus and dual flash, capable of full 1080[ video at 30 FPS. In regards to communication, it has Wi-Fi 802.11 b/g/n, Bluetooth 3.0 and HSPA+ (up to 42MBPS) and wireless hotspot functionality. As for sensors, the K900 has A-GPS, Gravitation (I am guess a gyroscope?), Ambient light sensor and a Proximity sensor.
Box Contents
This is always the excitement of opening a box of a brand you have never dealt with before, I had no clue what to expect.
The box had a cover which had the K900 branding in a huge cut out. Being that the box was black it didn’t make sense. Till..
The inside of that cover was in red! So taking the box out lights up the K900 branding. Sexy! Lifting the cover reveals the phone. In first impressions I thought the phone was going to be smaller than the big box, turns out it was the size of the box.
I know there isn’t anything out of the ordinary to expect in an unboxing, and so nothing unusual here. A Micro-USB Cable, a pair of ordinary Headphones and a SIM-Card ejector tool attached to the small manuals card. Weirdly, I have not received a wall charger, but I have so many of them laying around there is no problems and of course, the retail units will have one without a doubt.
Design, Body and Display
The device is a very good looking device despite its large size. I have used many devices over the past few months from iPhones, Galaxies, HTC Ones (Normal and Mini) and others and not a single one got the stares and questions asked as the Lenovo K900. It does have a personality and it is eye catching.
To start things off, lets talk about the front (Apologies for the low quality pictures) From the top sits a small cut out for the speaker and to the left the front facing camera. The sensors are nearly impossible to notice, perfect integration that is. Lenovo branding in the center and then the huge screen all the way till the bottom where three Android buttons sit, Back, Home and Options/Settings.
Flipping the phone to the back is where things start to get an even more premium look. Up top sits the 13MP camera, Dual-Flash and the secondary noise cancelling microphone, then comes what appears to be a back cover, but it isn’t removable. It’s in stainless steel brushed with 4 corner screws to make it look somewhat industrial? I think it has a nice touch. There is an engraved Lenovo logo towards the top and below sits the Intel logo. Finally towards the bottom sits the loud speaker.
For all of you wondering about the stainless steel durability with us, yes the sides do scratch up a bit. I could recommend trying to find a case but I just think it looks so good without one. Also, not too sure you can find a case that easily as well.
They kept the design clean, which means there is nothing to the top of the device. I think with a device this big, anything on the top would be suicidal because it would drop functionality dramatically. Fortunately, the 3.5mm headphone jack, Micro-USB port and primary microphone are on the bottom with nothing on the top. Thanks Lenovo.
The volume buttons are found to the left of the device, but as one button. To the right side sits the lock/power button and towards the middle, the SIM-Card tray. Please be gentle with the tray if you get one, because as with my past experiences with metal trays, if this bends just a tiny bit, it will ruin the look and the flatness will never return again. Either way, pretty straight forward and all buttons feel metallic while the lock/power button have a little pattern on them.
The feedback on the buttons are good but the lock/power button is slightly too soft, which may click on while holding the device in one’s hand.
So yes, the size… Here is the K900 beside the Nokia Lumia 925 and HTC One Mini.
The Nokia has a 4.5 Inch screen while the HTC has a 4.3 inch one, clearly being 5.5 makes it huge, plus the device is actually quite tall.
The device feels really nice in the hands, but it does need a lot of getting used to being a phone of this size. It does slightly stick out of my jeans pocket. I have almost dropped it a few times because I am not used to using such a big device. Certainly if people are used to 5+ inch devices this might not seem too big, but I have never gone over 5 in my pockets before. It is a big device, that I started to get used to after about a week or two of use. I started to carry it differently, more towards a small notepad than a normal smartphone. I got used to it eventually! The metal back does get cold quickly especially in air conditioned areas so picking the phone up does feel special.
As for the screen, it is absolutely brilliant. The clarity is amazing, the brightness can go up to levels that could be uncomfortable (but means brilliant in the sun). The only downside to the brightness is in the OS side as it can only be set at 30%, 60% and 100%, I would have preferred a slider but I am just being picky. Being 400PPI no pixels can be seen and the color representation is just brilliant, one of the best screens I have used in a smartphone, should be thankful to the IPS technology then. This is possibly the most inviting smartphone I have ever had in terms of wanting to watch videos on it, and I often just load videos from the laptop to the device to watch it there instead.
Memory and Data
This is where things complicated, and a bit unusual. Essentially the device comes with 16 GB of internal storage, which supposedly nearly 10 GB is free to the user, but what makes no sense is how it is managed..
The device states that internal storage is 4.68 GB out of which I have nearly 600 MB free, and the USB storage is 9.77GB. On the bottom is the option to erase the SD card. There is no SD card. At first glance, it seems that the device has 5 GB of internal memory and like 10 GB of a separate internal memory, but this is actually a security thing that Lenovo has implemented, they have partitioned the drive so the system’s section of the storage remains untouched. Connecting the device to the computer, or accessing the built in file manager only displays the 9.77 GB partition.
Sadly, as I have often stated, getting 16 GB of storage on a smartphone today is a low amount of storage, especially considering only nearly 10GB is only ever free with no external memory card slot option. Being on Android, every single cloud storage platform has an app, but Lenovo do not provide any free cloud storage on any service.
As with typical modern day Android device (The K900 was launched in January in some markets) it comes with 2GB of RAM. With normal use, I average around 700-900 MB of free RAM. So the system seems to be managing its RAM fairly decently, and I have never experienced any memory issues in my use.
Camera
The K900 comes with a 13 MP camera with every option one could need on a smartphone.
I wanted to really show the settings and viewfinder, but the K900′s screen shot utility is limited to only areas where the notification center is accessible, and all attempts to get a decent screen shot app without rooting failed miserably (before I forget, rooting this device is not an easy task, near impossible to find sources online)
On the bottom left of the screen is where the main settings live and it has three main sections. The Basic section includes toggles for switching between cameras, flash settings, resolution, scenes (normal, low light, motion, etc), adjustments (brightness, contrast, etc), image quality settings and guide lines. The Advanced section covers the ISO, white balance, stroscopic settings and a toggle to enable or disable image capture by touching the screen. The last section is the other settings where the user can control GPS tagging, sounds, animation, focus modes and a reset tool.
On the left of the screen there are two quick toggles for the flash and switching to the front camera. towards the right there is even more settings! on the top there is a small tool to display the selected settings in tiny icons and a arrow button to set the camera modes (HDR, low light, smile detection, macro, timed photos, burst shot, panorama, and night portrait mode.
To the bottom of that.. is even MORE settings! well okay, not settings but there is a button that opens a whole table of effects for the photography, there is about 24 different effects to play with. To the far right sits the buttons to switch to video mode, capture an image and a thumbnail of the last photo taken.
Here are some sample pictures taken with the K900 in various real world situations.
A nice, decent lit Macro soft of the Blackberry Q5 (Review of the Q5 can be found here)
Low light shot of the HTC One Mini (Review of the One Mini can be found here)
A shot with decent lighting of a new packaged headset, lit well but notice how the device itself is over exposed.
Decent interior lighting, the text is fairly clear at zoom, the disclaimer line is blurred though.
Outdoor shot in daylight
Indoor shot with decent lighting of a portrait (best focus and lighting on the picture).
The quality is really good, one of the best cameras I have come across in smartphones. The best? No, but very close I have to admit.
So is it all perfect? Almost. Although there is a nice hidden feature where pressing the volume down and capture button on the screen will activate burst mode without having to go through the settings, the zooming is bad. Not the zooming itself, but the on screen controls for zooming. Tapping the screen will bring the 4x zoom bar, and it is really thin and 9 times out of 10 trying to zoom in or out, it will focus on that spot on the view finger rather than lower/increase the zoom, its very hard to zoom effectively and the volume keys don’t adjust the zoom which I think is a waste of the keys but in essence of taking pictures, it does a very good job.

Operating System
The K900 runs on Android version 4.2.1 with Lenovo’s own UI. It is a very interesting looking system, with tons of customizable features. No, I mean seriously, tons. Almost every single aspect of the experience can be changed, from the icon sets, size of the icons, backgrounds of the icons, special effects, tens of page transitions for the home page and various transitions for the apps page, automatic clean up (where inactive apps can be automatically removed), desktop layout backup, tens of built in apps, with up to 9 desktops!
And I wish that was it.. there is a lot more to this OS that I thought, Lenovo did a great job.
Let me start things off at the home screen and this essentially gives you an idea of how the operating system looks like. Pressing the menu button brings up the list of options (most of which are mentioned above) but this gives an almost unlimited amount of customization. Tapping and holding on an empty spot brings up the tools for transitions (known as effects), and the options to add apps, shortcuts, widgets and more! Lenovo’s power app has its own widget as well, which shows estimated time before battery runs out and quick toggles.
Although most of our smartphone use doesn’t include phone calls or sms somehow, it is the base of a phone. Lenovo has done a great job here with their all in one approach. Call log, messages and contacts are all under one section. They have done it in a smart way where the dialler is on top of the log instead of two pages, certainly is more productive. The messages have a very interesting look to them, which I thought looked nice. Moving all the way into info center brings up a set of settings including a way to backup and restore contacts. It may not be a big deal to many but i think this all in one spot is a nice touch.
The took the extra step in small touches, for instance when you call someone, the phone will vibrate the second the receiver picks up, not sure if any other manufacturer has that or not (never paid attention to it) but it is really cool especially in noisy situations.
Before I go on, Lenovo has done something to this phone that evokes a sense of professional use or focus that has driven the development of the user interface, in my opinion.
The applications list/page is a typical experience, but Lenovo has put their own touch. The device comes with built-in applications such as Flashlight, a whole array of google apps, file manager, evernote, uc browser, skype and a few others. The transitions are various as well, and can be set to flip as a cylinder, apps snake through each other and others.
The device does stutter and lag a bit sometimes, but the general transitions are always smooth. I guess this always goes back to the optimization aspect, because the device is certainly more than capable, hardware-wise.
The notification center is the typical Android 4.2.1 with a strip of quick toggles and the whole list is just a tap away. Activating Lenovo’s power app also adds a little information strip for the battery life and active functions. Two finger swipe down brings out the whole short-cut list.
Another important aspect of the device (being the most used feature) is the keyboard. The keyboard is nice, smooth and easy to type on, no troubles there but there are a few loose ends. One of which, is the feedback vibrations. Initially it would vibrate when tapping and then suddenly it would stop vibrating for no apparent reason.
In SMS mode, the enter button only appears when the keyboard is in Capital mode. Surely, these aren’t concerns but with an attempt to be so refined, they could have entirely eliminated keyboard issues. The numbers and symbols are a tap and hold away although I wish they applied more symbols in the same way throughout the keyboard.
The settings menu is a whole operating system on its own! Under common settings the user will find the typical essential settings of the phone. Under Feature Settings is where things start to get interesting. The Lenovo K900 has many smart sensory features like engaging maximum volume when it detects its in a pocket, decreasing of volume when device is picked up while ringing, enabling the volume keys to turn the screen on, shake to lock the device and knock to turn the screen on.
Do these really work? They all do but not without fault. The shake to lock the phone comes in handy because the device is huge and if it is being held one handed, it would eliminate the need to go up to press the button. The problem with this is, it would lock when moving around the device. In regards to the knock to unlock, it works by sudden movement rather than tapping/knocking the screen, which in my use, meant the screen came on when I would move about or place the phone on a table or anything solid. The rest worked fine. Cool features just need to be optimized perhaps.
Under All Settings, the device can be almost completely be adjusted to liking from communications, application and account settings, device storage and running applications and finally system settings and all these can be seen above.
In typical Lenovo way, everything built in has its own Lenovo touch. The file manager is quite smart! It allows traditional folder access, search, history, etc and also an automatic access of files based on their categories.
Lenovo has done a very good job with their own Android UI. There are various applications built in, a lot of customizable options to keep things individual and all transitions and UI related functions run flawlessly. The processor I believe is the only source of things being out of hand. It runs up to 2.0Ghz, with no mention of what it’s general speed is and due to that, there are times when there would be stutters and lags. When the processor is running on full speed, everything is super smooth but I cannot deny when it is not.
Applications on the K900 run absolutely smooth being in full 1080p. I have not experienced any applications having any issues what so ever, but what did have negative experiences was some games. The general non-resource hungry games always work, but games like Real Racing 3 were really out of order. It would stutter and eventually crash. I even downloaded Asphalt 8 (just out by the way, nice game, I somehow prefer 7 till now) and although it didn’t crash, it would lag! I tried it earlier today and it ran for much longer than the last time, then lagged.
Again I believe this must be due to the processor’s optimization and Lenovo’s focus on professional use I guess. Without a doubt it isn’t a slow or weak device, just lacks a little.
The imaging on the K900 is called SuperCamera and the image viewer is called SuperGallery. The self-claimed Super Gallery is quite feature-full and it allows creation of combined images and GIFs. It also is capable of providing the complete details of an image (such as size, resolution, device used for capture, etc)
Multitasking is taken care off in the typical Android way, but for some reason, there is no button to clear all open applications and being that there is no limit to open apps in the list, it can get a bit annoying swiping away all the open applications to clear it.
Aside from those few criticisms, with the huge and beautiful screen on the K900, and good performance (especially when its running at maximum juice) it is a very solid device in regards to the operating system.
Performance
There is no doubt in my mind that this is a powerful device, because it really is but with the processor feeling not entirely optimized, there is slight sluggishness while operating the device. Is it evident enough and noticeable? Slightly. There are times when I unlocked the device and the home page is still loading its widget, or swipe to another page and the icons pop up but weren’t already ready.
Switching between applications and running applications is really smooth, the processor really does handle it well, but I wish the processor ran on 2.0 Ghz the whole time because I feel when it is idle or nor running at maximum performance is when it gets sluggish. I have tried several attempts to really work up the processor and then try the general OS transitions and everything was perfectly smooth. I feel the Intel processor isn’t the best for Android or at least isn’t optimized well enough.
In typical, simple, basic ihabstech fashion, here is the quick fish tank test, which gives a rough idea of how good the device’s graphics and processor can be.
(running at 980×440 resolution)
With 100 fish, it held 18-21 FPS
With 250 fish, it held 11-13 FPS
With 500 fish, it held 9-11 FPS
Keeping in mind the HTC One had a 1.7 GHZ Quad Core Snapdragon processor, it had about an average of 1-3 FPS less, the Lenovo K900 is a performer!
To try it out the Fishtank Test for yourself, you can visit this link, and I think I shall be using this with future device reviews too.
Battery
The battery of the K900 is an interesting topic. Before getting into my experiences, the Lenovo Power application that integrates into the OS, is pretty cool.
This is the essential app, where there are quick toggles for the system tools and an estimated time, in the best case scenario, till the battery would die. There are also several battery modes and a custom mode with estimated battery life for each.
The following are two sample battery life tests I have experienced.
In first test, I managed to pull out 12 hours of battery life with nearly 6 hours of standby time.
While this second attempted pulled out 16 and a half hours of battery life with roughly 8 hours of standby time.
The shocker is that I have once managed to drain the battery in less than 6 hours of use. What this essentially tells me is that the battery life of the 2500mAh sized battery in the K900 is very variable to the users use of the device. I am sure if I had set things up rather than running at max, I could get a whole day’s use. I recommend anyone who buys this device to play and test a lot with the battery application and find the best of both worlds, battery life and active functions. It essentially has a decent battery, even though I have no idea how they fit that battery in there.
Wrap up
The Lenovo K900 has been a delight. Yes, the device does need polishing up in various aspects, but that does not take away the fact that this device is solid, right now.
The build of the device is phenomenal, the blend of stainless and full glass front is just a beauty and the device doesn’t even think of creaking. The camera is really powerful, full of features, and speaking of features the system really feature-full and is speedy, efficient and very smart. Sure, it does have a few loose ends in terms of battery management, operating system and processor optimization but for professional and ordinary use of the device, it runs near perfect.
I am sure Lenovo are already working on the next generation of models, including a new flagship, and if this is how they handled things early 2013, I can just imagine they would do really well in the smartphone market!
Device Pros and Cons
Pros:
- Brilliant build quality
- Slim profile
- High resolution camera with good imaging features
- Excellent Full HD 1080p IPS screen
- Lenovo’s UI has well optimized applications and a lot of customization
Cons:
- Hardware isn’t fully optimized for software (some apps don’t run smoothly)
- OS is sluggish at times and transitions aren’t always smooth
- Device is very big for most people
- Questionable battery life
- Not all gestures work well in real world use
- Limited storage
Thanks for reading and please do leave your comments, thoughts and questions below

Looking for a good USB Hub

I am looking at purchasing one of two different USB hubs for my iMac. Both are from Belkin. The first is a 7 port hub and the second a 4 port.
I am leaning towards the 7 port but have heard that it suffers from severe overheating. I'd like to know if anyone here has experienced this problem with either of the Belkin hubs. If you did have a problem what are you using now?
Any info is helpful, even recommendations of other hubs available on the market. A four port hub meets my requirements exactly. I have an APC UPS and my iSticks plugged directly into my iMac, and I will be plugging in my free-1 Skype phone, 5G iPod, card reader and Shuffle into the hub. I like the idea of having a couple extra ports for future devices.
Thanks.

Thanks Tom.
Not bad. However, I don't plan on using the dock once my Vaja case arrives. Much as I did with my XtremeMac case with my two previous iPods, I will leave my iPod in the case when connected or charging. If I did plan on using the dock I would use the Universal dock I have now. To be honest I think having an upward facing USB port is extremely useful for plugging in a Shuffle. With the TuneSync hub I would have to reach in behind every time I wanted to connect or disconnect the shuffle. Either that or I would have to buy a dedicated Shuffle dock. I think it is more efficient to purchase one device allowing me to connect a Shuffle rather than two.
Thanks again.

Windows 7 and Mac 10.5 network file sharing

I am having extreme difficulties sharing files over my home network! I have 3 PCs and one Mac. I have tried the Mac forums and the Windows forums, to no avail.
On the Mac side:
File Sharing is ON, with smb
Users are set to Everyone with read/write privileges
WINS has the correct Workgroup name
Network Name has no spaces in it
Shared my Desktop, Public Folder, Documents, and Shared folders (just to cover root folders and specific ones too)
Mac gives an smb://xxx.xxx.x.x address and a local network accession "mycomputername.local," but I don't know what to do with either of these things. When I put the addresses into the Windows Run dialogue box or in Internet Explorer, they don't seem to recognize the path.
Firewall is set to Allow All Incoming Connections
Under the Shared location in Finder, I can see my router name, and if I click on it, I can connect. No password is required. I am connected as my account name. However, I can't see the PC or anything at all, in fact.
Under the Shared location in Finder, I can see my shared name for my Mac. But I cannot connect to it, probably because I'm connecting from my Mac.
It would be nice to use the smb://DNSname/sharename or the smb://IPaddress/sharename function in the Go to Server window, but I have no idea where to find this information on my PC. Or on the network. Or whatever this is referring to.
On the PC:
Sharing is NOT password protected under Advanced Sharing Options
I am sharing my Desktop and My Documents with Everyone and Guest, and Windows 7 has provided a file://computername/Users/foldername path. However, when I put this into the Connect to Server or Connect to File window, there is an error.
I can click on my Mac computer name in the Network window, but I get the error message that it cannot connect (network path cannot be found, using \\MYMACNAME as the path). This is when my Mac says it is "connected" when I click on the router in Finder's Shared places.
Of course both the Mac and the PC have full connectivity to the same network.
Also, I have disabled the internal firewall in the Belkin router.
Also, my accounts have identical names with no spaces.
My Mac (10.5) DID successfully connect to Windows XP before I upgraded.
Any advice? Thanks guys!!
P.S. -- I have also posted to the Windows people here: http://social.answers.microsoft.com/Forums/en-US/w7network/thread/b5144e55-d024- 401c-85ae-1cf94226b786
In the hopes that I will double my chances of getting an answer.

And my response:
Okay, so here's what I've done:
OS X: did the sharing thing, smb thing, and directories thing.
Win 7: Network sharing settings are correct for Home or Work (current profile). I left my Public alone, but verified that my network is recognized as a Home location.
User accounts exist in both the Mac and PC. Names are the same. Heck, passwords match and I'm logged into the same account on each computer, just in case.
Firewalls are scary to me, so I did the best I could. I went to my browser, typed in my router IP address, and went to the DHCP Client List. Both of the computers were listed with their assigned IP addresses. I "reserved" those IP addresses so they the router would always assign that IP address to that MAC address (so I could count on it in the future). It turns out that they are sequentially assigned, so I figured that if I added any more devices (my other PC, the PS3, etc.) those IP addresses would just be +1 to the last digit cluster in the IP address.
Then I went to Windows Firewall, because I don't have a third-party firewall. I confirmed that I was connected to the Home network, and then clicked Advanced Settings. Wow, there's a lot of rules! There were multiple File and Printer Sharing rules (both inbound and outbound), so I didn't mess with them. Instead, I created a Custom Rule (bot inbound and outbound) for all programs, any protocols and all ports, and added the IP address range (192.168.2.1 - 192.168.2.9, giving myself plenty of extra for future devices) I found from above to the local and remote IP Address boxes. I specified to Allow the Connection for Domain, Public and Private, and gave it a name that started with A so I could find it easily in the future. Finally, I set the Interface Type to be LAN and Wireless (my PC is wirelessly connected).
In OS X, in the Firewall tab of the Security preference, I set it to Allow all incoming connections. File Sharing (SMB) is the first name on the list, but I cannot click on it or modify it in any way. I don't know what else to do. Am I missing something?
I've shared My Music and Desktop on the Win 7 for Everyone (not just the Homegroup!), and shared My Documents and Desktop for Everyone to read/write on the Mac.
Okay, now I need to reboot on both computers. brb...
Wow, definitely don't reserve any IP addresses on your router! I took that setting off, restarted everything, reset the modem and router, and I can now connect both computers to the internet.
I can still connect to the Windows via the Connect to Server dialogue and smb://AJPC.
In Windows Network, I can now see my Mac user account name, but when double-clicking on it I get the error message "Windows cannot access \\ComputerName. Check the spelling of the name. Otherwise, there might be a problem with your network. To try to identify and resolve network problems, click Diagnose." Under "Details," it says Error code: 0x80070035 The network path was not found." When I diagnose, Troubleshooting can't identify the problem.
Any advice? Thanks for your help guys!
A side note: I just checked my router's DHCP client list, and my PC is now connecting at 192.168.2.8, which is definitely not sequential. Good thing I specified the IP Address range all the way to 192.168.2.9 just in case; apparently the router can't count.

I'd like to alter my Airport Extreme/Airport Express wireless network so that the 3 Expresses connect to the Extreme via Ethernet. I've been told this will create a more stable wifi signal. How do I configure this using Airport Utility? Thanks.

I currently have an Airport Extreme Base Station connected to my DSL router by Ethernet. Because I have a long, sprawling home, I have 3 Airport Expresses configured to "Extend the Wireless Network" I've established. Because of my home environment--thick walls encompassaing wire mesh, sprawling rooms, etc., it is hard to maintain a continuously-strong, stable WiFi signal. I've been told that I can create a much more stable network by connecting the Express units to the AEBS via Ethernet cable. Since my home is already wired for Ethernet, I'm considering making this change. If I proceed to establish the Ethernet connections, how do I then set up Airport Utility to accomodate this switch from a Wireless-based WiFi network to an Ethernet-based WiFi network?
Thanks in advance for any help.
Phyllis

I don't see anyplace in the Utility to designate HOW the Express units are connected, only how they relate on the network to the Extreme,
As I mentioned in the previous post, when you click the Internet icon in AirPort Utility:
Connect Using = Ethernet (This tells each Express to connect to the Extreme using the ethernet connection)
Connection Sharing = Off (Bridge Mode) (This setting allows your AirPort Extreme to function as the "main" router on the network, as it must for the setup to work correctly.
You do not need to configure anything differently on the AirPort Extreme (as long as it is working correctly now) to connect the AirPort Express devices.
The only other question I have is the following: I'm currently already using one of the Ethernet ports on the back of the Extreme-- for my husband's iMac. I really don't think he gains much in performance over how the iMac would run through wifi, so I could disconnect the iMac. If you think the iMac would do better to stay on the Ethernet connection, should I use a switch/splitter to add an extra connection?
Since each AirPort Express must connect using ethernet, you will need to use the 3 LAN <-> ports on the AirPort Extreme for the AirPort Express devices.
I would suggest that you try connecting the iMac using wireless to see if that will work. If the wireless connection is not satisfactory, then you can add a 5 port ethernet switch to one of the LAN ports on the Extreme and then plug all the devices connecting using ethernet....the iMac and the 3 AirPort Express devices...into the remaining 4 ports on the switch. That will leave you with 2 open ports on the AirPort Extreme for any future devices that may need to connect.
When you test out the system, here is a trick to find out which device your computer is actually connecting to at any given time as it "roams" around the house.
When you have AirPort Utility open to configure each AirPort Express, jot down the AirPort ID for each Express. You can do the same for the AirPort Extreme.
As you move around with your laptop, hold down the option key on your Mac keyboard while you click on the fan shaped AirPort icon at the top of the screen. Look for the BSSID. That is the AirPort ID of the device that the laptop is connected to at that time. it should also be the ID of the closest AirPort Express (or AirPort Extreme if the laptop is close to the Extreme at the time).
Let us know how things are working when everything is up and running.

USB 2.0 ports on MS-6398E board

I'm new to the MSI forums so bear with me if my style of posting is not yet quite right.
I've got an MS-6398E motherboard and in Win2K the Device Manager lists one USB 2.0 root hub and 3 USB root hubs (no numeric designation).
When I check the properties sheet for each root hub the USB 2.0 root hub shows 6 ports available and with a single device on each of 2 of the other 3 hubs it shows 1, 1 and 2 ports available.
Patently something is not right because it seems that I have 12 ports in total on a motherboard that only has 6 to begin with.
Ideally I would like the 2 devices I currently have plus any future devices to run off the USB 2.0 ports because they're faster.
So I'm open to suggestions.
Thanks in advance.

I just installed my new GNB Max a few hours ago and it uses the same ICH4 southbridge as your board so therfor all the peripherals are the same.
I also see 6 ports on the USB2.0 hub and 2 on each of the other ones.
Looks normal to me since they all seem to work.

How do you permanently delete apps from all your mac products (MacBook Pro, iPad, iPhone), how do you permanently delete apps from all your mac products (MacBook Pro, iPad, iPhone)

how do you permanently delete apps from all your mac products (MacBook Pro, iPad, iPhone)

They are not taking up storage space. Apple knows you installed them at one time (="purchased", whether you paid money or not), and merely keeps a list so that if you wish to reinstall any of them on this or a future device, you can. This is useful if maybe you deleted them due to space constraints, and now have a device with more memory and wish to reinstall.
It's also useful for taking a trip down Memory Lane looking at all the useless apps you installed once then immediately deleted once you realized they were total garbage ...

Place video and images in different folder? N73

Hi All,
Once I go: gallery/images and video, all images and video will display together. There is no way to create new folder so that I can put, or hide some private images there.
I've try using PC to do the job, created new folder and place some images in, does't work...
There is no problem on my previous Nokia phone, can anyone care to share or advise?
Thanks!

Unfortunately, some software designer decided that it would be better for users to see all videos and images in one long list no matter where they are, and then require you to use the "Album" feature to organize them.
In other words, the Gallery simply ignores different folders and shows everything in a long list.
There's nothing you can do, except use a different app.
I can only hope that the behaviour returns to something more sensible in future devices.

4G future devices

Similar Messages

Maybe you are looking for