5 Minute video - But only exports :30 seconds...Help Please!
It's my first project on Final Cut Express HD. When I export it to a Quicktime movie, it exports the complete 5 minute video. When I export it using quicktime conversion to wmv. it only captures the first 30 seconds or so of the video.
Why is this happening? What can I do? Any suggestions?
Thanks for your help.
welcome,
sounds like you have the demo version of flip4mac, unless you pay for the complete version it will only allow you to export 30 seconds.
Similar Messages
-
Exporting 30 minute video, but only play 3 minutes
G'day,
I am attempting to export in FCE a 30 minute PAL video (720x576) as a DV-PAL AVI, once exported the AVI is 5.1 gig in size, put the play length of the clip is on ly 3 minutes long, where as it should be of course 30 minutes long.
I have no idea where I am going wrong. Any suggestion?
System Specs:
IMac 2.93 GHz Intel Core 2 Duo
4 GB RAM
500 GB free on HDAre there any In and Out points marked in the timeline?
-
So, I downloaded a slideshow templates and I'm trying to make a timelapse with 900 pictures converted into 30 fps to get a 30 seconds video but after exporting my movie why is my video length 15 minutes?
What settings are you using to export the video with? I think 29.97fps is the only one that works with LR 5:
http://lightroom-blog.com/2013/09/17/timelapse-again-in-lightroom-5-2/
http://lrbplugins.com/shop/presets/lrb-timelapse-presetstemplates/ -
FCE only exports 29 second of video
Newbie here! I am trying to export a video sequence that has no markers and FCE will only export 29 seconds of video. I am exporting Using Quicktime Conversion file format Window Media. Then only 29secons of video is on the file that is created. This happens on several different sequences. I have cleared all markers but that did not help. Is there a preference that I need to change? Have I changed something that I should not have?
Thanks for your help.Hello and welcome to the forum.
It sounds like you're using the trial version of the QuickTime plugin which will only convert 30 seconds of media. You'll need to buy the full version; I think it's $50.
http://www.telestream.net/flip4mac-wmv/overview.htm -
I am trying to export my project to an avi file, but its only exporting the audio, help? I can open the avi file but there is not video. I am choosing uncompressed avi, 1080x720 frame rate 29.97, what can i do?
The above was a quote and AME is not necessary. From the Timeline selected Ctrl-M brings up the Export window. There select "AVI" and under Video Codec below select "None"
-
Export using quicktime conversion only exports 23 seconds of my project...
Hi,
I am trying to output a promotional video to .wmv format using the quicktime conversion. It only exports 23 seconds of footage before stopping, which is no use at all.
Whats wrong?
I have tried setting ins and outs around the video, and I have tried selecting all the content in the timeline, but nothing seems to help.
Thanks.DOC EDITOR wrote:
Thank you, very much. The cost of the flip version needed is only $49 so that is not bad, but why would you actually need something extra when the conversion option is available in Final Cut? I would understand if the option did not exist at all and the flip 4 mac would make the option available.
Not on mine. I had to buy a third party product to do that.
AFAIK, the ability to be exporting to wmv is not included with FCS or Compressor or QT. If it appears in your options, you may have installed another app that includes the transcoders and codecs.
Microsoft and Apple do not cooperate in the format wars, neither will support the other and there's money involved. It's a shame becuase Flash is whacking both of them stupid and Silverlight is even kinda cool. QT's days are probably numbered.
bogiesan -
hi, someone please help me out... am Nelson and got an issue with my apple Qmaster... I got OSX maverix and on my system preferences the Apple Qmaster dosent load but only gives an error, someone please help.
the error is like "Could not load Apple Qmaster preference pane"
if there is a way around it please help me coz I cannot render my video projects on Compressor anymore... -
I'm updating my iphone 4. I can see that the update has been installed on the phone, but only for a second before it asks me to restore/back up from iCloud or iTunes, which I've done THREE times. It has to be something really simple...please HELP
Restore as a NEW device to test. If this solves it, that means there is some corruption in your backup file, or maybe it's one of your apps causing the trouble. If the problem is still there, you should take it to the Genius Bar at an Apple Store for evaluation.
-
Trying to install Adobe Photodeluxe (elements 13) I have box and cd sleeve with serial number, But registration won't let me type letters only numbers allowed. Help please.
You possibly have a redemption code which has to be converted into a serial number.
https://helpx.adobe.com/x-productkb/global/find-serial-number.html -
my macbook pro will not play a video without pausing every 11 seconds. PLEASE help me figure out what is wrong. very frustrating. I have already tried restarting
buckmacie,
has the video been completely downloaded onto your MacBook Pro when you start to play it? Or are you playing it while it downloads, AKA streaming it? -
I turned off my iPad, but when I went to turn it back on, the apple logo just stays there. It's been there for 10 minutes, and hasn't gone away. Help please.
First thing to try is to reset your device. Press and hold the Home and Sleep buttons simultaneously ignoring the red slider should one appear until the Apple logo appears. Let go of the buttons and let the device restart. See if that fixes your problem.
-
How do I delete stored email addresses in my iphone? When sending photos, I don't want to have certain email addresses "popping up" from the internal memory, I've deleted my entire "Contact" list but they still appear. Help please!
As with the Mail app on a Mac, the iPhone's Mail app stores all email recipients in a list of previous recipients which is separate from the address book or contacts. The email address autofill feature when addressing an message pulls from Contacts and from the list of previous recipients.
Different from the Mail app on a Mac, there is no access to the list of previous recipients with iOS on an iPhone, iPod Touch, or iPad to remove a previous recipient from the list, or to add a previous recipient to the address book or contacts that is not already entered - not at the present time anyway.
The only way to purge the list of previous recipients at the present time is by restoring your iPhone with iTunes as a new iPhone or not from your iPhone's backup, which will start being re-populated again with every sent message. -
i dont know how i got my photos to my ipod touch from my pc and now i wanna delete them but couldn't. so need help. please let me know.
To turn off auto sync - launch iTunes and go to Edit>Preferences>Devices - check the box at the bottom that says - Prevent iPod, iPhones and iPads from syncing automatically. Click OK and then quit iTunes.
Connect your iDevice to your PC.
Launch iTunes,
Click on the device name on the left side of the iTunes Window.
Click on the Photos Tab in the iTunes window on the right.
Untick all of the photos or albums that you want to remove.
Click on Apply in the lower right corner of iTunes
If you untick or uncheck the Sync Photos heading and then click Apply it will remove all of the photos from the device when it syncs. In this screenshot - I have only certain albums and events selected to sync. -
i was in science trying to use my calculator and i couldn't slide to unlock my ipod. later i kept getting notifications but it still wouldnt slide. help please?
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar -
Hi can I add the touch define to my iPad 4 my iPhone 5 has this feature when I touch word it give me two choices copy and define but only copy with iPad 4 please answer me
Because...!
I've no idea why either.
Although it isn't normally possible to sync an iPod/iPad/iPhone with two computers (or manually manage an iPhone from more than one) it can be achieved if all computers have copies of the self same library. See Re: how do i sync on a second laptop without the data on my iPhone 5 being erased?
tt2
Maybe you are looking for
-
New DVR, Can't Recognize Existing ESata Drive/Prog​rams
I had a Motorola 7216 DVR box that had an external ESata drive. The box had three issues: froze 2-3 times a day for maybe 30 seconds, sound "clipping" during loud sections of shows/movies, and I could never get the Android app or web app to connect
-
Office 365 - content search web part
Hi, I have an office 365 site, and in one of the page, i had added 4 Content search web parts each of it having its own custom display templates. Now, the problem is when the page is browsed (intermittent) or edited (always), the CSWP's throwing erro
-
FCP X not reading camera archives (Unsupported Media, Invalid Directory)
I shot a documentary in May of 2012 and imported the media everytime a card would fill up or at the end of the shoot day. I also created a Camera Archive for each card (we shot Sony PMW-F3 and PMW-EX1). A few clips have gone missing and when I plug i
-
I
-
How do I re-install Bonjour on OS 10.4.11? I have my original disks, but does basic install allow me to just install Bonjour or all original software?