6110 navigator working days date failure on alarm

My 6110's alarm is set active from monday to friday. In the week ends (randomly saturday or sunday) the date goes back one day. Is theere a way to solve this problem? thank you

Mine is set to off and always has been. I don't know if my network actually broadcasts time / date for update anyway.
Either way the phone is OFF when the date change is supposed to happen so cannot get incorrect time from network.
I have also tested with the phone off. i.e. Set time to 23h59 on Friday, switched off phone and when I switched it back on again the date was correct. Don't know what the difference is between this and just leaving it to run as normal. Its all too weird.

Similar Messages

Get Nexr working day for the given calendar id

Hello,
My requirenment is I have a date.If that date falls on friday then I have to get the next working day date i.e.Monday for the given Calender iD

DATA:wk_dat TYPE scal-indicator.
PARAMETERS:pa_dat TYPE sy-datum.
CALL FUNCTION 'DATE_COMPUTE_DAY'
EXPORTING
date = pa_dat
IMPORTING
day = wk_dat.
CHECK wk_dat = 5.
pa_dat = pa_dat + 3.
WRITE pa_dat.
here if u want to get the next working day
Use FM DATE_CHECK_WORKINGDAY after the check statement.
add the date until u find a working day.

Nokkia bluetooth carkits & 6110 navigator

Hi I have a 6110 navigator, can anyone tell me what it is compatible with regards to nokia car kits.
I have a car kit in my work car but cant get my private phone to connect through the blue tooth, facility, are there any tricks I need to know about.
My blue tooth function is on,
Thanks for any help

21-Apr-2008 03:56 PM
confiture wrote:
The CK-7W and the new CK-300 will be compatible. Both will charge the phone, allow calls and navigation instructions through the car speakers.
There is a Nokia cradle for this phone too.
Hi,
Thanks for your reply, I have found out that the ck-7w kit has been installed in my work car, for another Nokia model.
Will my 6110 navigator work through this kit using the blue tooth connectivity only, as its not compatible with the installed cradle.
Is there something I need to do to enable the blue tooth connection.
Again thanks for your reply, any help would be apprechiated

N81 8GB Alarm/Day date problem

Hi new member here. Have N81 8GB Have workday alarms set Mon-Fri they work fine. Always switch my phone off at night, so I switch on Saturday, and phone day and date is still Friday and have to alter it. Have tried using auto time update and makes no difference time zone is ok GMT+1 hour. Anybody else having this prob or am I doing something wrong?

Hi again!
I found a way to make my 6110 Navigator (S60 3rd) change the date on weekend also i use alarm on workday!!!
Let it not call a fix let it call a trick to manage this s60 3rd prob.
On the 6110 you can set more then one alarm...
I use one alarm on workday - wake me up at 6.45 in the morning on workay.
I programmed a second alarm for EVERY DAY (7 a week ) starting at 8.00 in the evening (cause this is a time the alarm doesnt disturb me).
Cause of the second alarm / since i set it - the date change works absolutely reliable.
Hope i could help out.
(sry for bad english)
sw00p

To find the no of working days b/w given date

Hi ABAP Experts,
         Here i have one requirement .
         table is tfacs
          in this table i want to know the no of working days b/w the given date. Here i have attached my code .pls go through it and do me needful.
TABLES : tfacs,vbrk.
DATA: BEGIN OF ty_tfacs OCCURS 0,
        ident TYPE tfacs-ident,
        jahr TYPE tfacs-jahr,
        mon01 TYPE tfacs-mon01,
        mon02 TYPE tfacs-mon02,
        mon03 TYPE tfacs-mon03,
        mon04 TYPE tfacs-mon04,
        mon05 TYPE tfacs-mon05,
        mon06 TYPE tfacs-mon06,
        mon07 TYPE tfacs-mon07,
        mon08 TYPE tfacs-mon08,
        mon09 TYPE tfacs-mon09,
        mon10 TYPE tfacs-mon10,
        mon11 TYPE tfacs-mon11,
        mon12 TYPE tfacs-mon12,
        basis TYPE tfacs-basis,
        fenum TYPE tfacs-fenum,
        wenum TYPE tfacs-wenum,
        load TYPE tfacs-load,
        string1(31) TYPE c,
        string2(31) TYPE c,
        string3(31) TYPE c,
        string4(31) TYPE c,
        string5(31) TYPE c,
        string6(31) TYPE c,
        string7(31) TYPE c,
        string8(31) TYPE c,
        string9(31) TYPE c,
        string10(31) TYPE c,
        string11(31) TYPE c,
        string12(31) TYPE c,
        uk(31) TYPE c,
        total1 TYPE i,
        total2 TYPE i,
        total3 TYPE i,
        total4 TYPE i,
        total5 TYPE i,
        total6 TYPE i,
        total7 TYPE i,
        total8 TYPE i,
        total9 TYPE i,
        total10 TYPE i,
        total11 TYPE i,
        total12 TYPE i,
        END OF ty_tfacs.
SELECTION-SCREEN : BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.
SELECT-OPTIONS : s_jahr FOR tfacs-jahr MODIF ID b1.
SELECT-OPTIONS : mon FOR tfacs-mon01 MODIF ID b1.
SELECT-OPTIONS : s_month FOR vbrk-erdat MODIF ID b2.
SELECTION-SCREEN : END OF BLOCK b1.
SELECTION-SCREEN BEGIN OF BLOCK b WITH FRAME.
PARAMETERS r1 RADIOBUTTON GROUP c DEFAULT 'X' USER-COMMAND flag .
PARAMETERS r2 RADIOBUTTON GROUP c .
SELECTION-SCREEN END OF BLOCK b.
         INITIALIZATION
INITIALIZATION.
AT SELECTION-SCREEN OUTPUT.
IF r1 NE space.
    LOOP AT SCREEN.
      IF screen-group1 EQ 'B2'.
        screen-output = 1.
        screen-active = 0.
        MODIFY SCREEN.
      ENDIF.
    ENDLOOP.
ELSE.
    LOOP AT SCREEN.
      IF screen-group1 EQ 'B1'.
        screen-output = 1.
        screen-active = 0.
        MODIFY SCREEN.
      ENDIF.
    ENDLOOP.
ENDIF.
          start - of - selection
start-of-selection.
IF r1 = 'X'.
    PERFORM get-data.
    PERFORM display-data.
ENDIF.
&      form get-data
       text
--> p1        text
<-- p2        text
form get-data .
DATA : total1 TYPE i.
SELECT * FROM tfacs INTO TABLE ty_tfacs
                                 WHERE ident EQ 'IN'
                                 AND   jahr IN s_jahr.
LOOP AT ty_tfacs WHERE ident = 'IN'.
    IF sy-subrc EQ 0.
      PERFORM get_string USING ty_tfacs-string1
                               ty_tfacs-mon01
                               ty_tfacs-total1.
      PERFORM get_string USING ty_tfacs-string2
                                ty_tfacs-mon02
                                ty_tfacs-total2.
      PERFORM get_string USING ty_tfacs-string3
                               ty_tfacs-mon03
                               ty_tfacs-total3.
      PERFORM get_string USING ty_tfacs-string4
                                     ty_tfacs-mon04
                                     ty_tfacs-total4.
      PERFORM get_string USING ty_tfacs-string5
                                     ty_tfacs-mon05
                                     ty_tfacs-total5.
      PERFORM get_string USING ty_tfacs-string6
                                     ty_tfacs-mon06
                                     ty_tfacs-total6.
      PERFORM get_string USING ty_tfacs-string7
                                     ty_tfacs-mon07
                                     ty_tfacs-total7.
      PERFORM get_string USING ty_tfacs-string8
                                     ty_tfacs-mon08
                                     ty_tfacs-total8.
      PERFORM get_string USING ty_tfacs-string9
                                     ty_tfacs-mon09
                                     ty_tfacs-total9.
      PERFORM get_string USING ty_tfacs-string10
                                     ty_tfacs-mon10
                                     ty_tfacs-total10.
      PERFORM get_string USING ty_tfacs-string11
                                     ty_tfacs-mon11
                                     ty_tfacs-total11.
      PERFORM get_string USING ty_tfacs-string12
                                     ty_tfacs-mon12
                                     ty_tfacs-total12.
    ENDIF.
    ty_tfacs-uk = ty_tfacs-total1 + ty_tfacs-total2
                  + ty_tfacs-total3 + ty_tfacs-total4
                  + ty_tfacs-total5 + ty_tfacs-total6
                  + ty_tfacs-total7 + ty_tfacs-total8
                  + ty_tfacs-total9 + ty_tfacs-total10
                  + ty_tfacs-total11 + ty_tfacs-total12.
    MODIFY ty_tfacs TRANSPORTING total1 total2 total3
                                   total4 total5 total6
                                   total7 total8 total9
                                   total10 total11 total12
                                   uk.
ENDLOOP.
PERFORM write1-data USING 'COU' 'YEAR' 'MONTH01'
                           'MONTH02' 'MONTH03' 'MONTH04'
                           'MONTH05' 'MONTH06' 'MONTH07'
                           'MONTH08' 'MONTH09' 'MONTH10'
                           'MONTH11' 'MONTH12' 'TOTAL WDAYS' .
LOOP AT ty_tfacs.
   PERFORM write1-data USING ty_tfacs-ident ty_tfacs-jahr
                             ty_tfacs-total1 ty_tfacs-total2
                             ty_tfacs-total3 ty_tfacs-total4
                             ty_tfacs-total5 ty_tfacs-total6
                             ty_tfacs-total7 ty_tfacs-total8
                             ty_tfacs-total9 ty_tfacs-total10
                             ty_tfacs-total11 ty_tfacs-total12
                             ty_tfacs-uk.
ENDLOOP.
ENDFORM.                    " get-data
TOP-OF-PAGE.
FORMAT COLOR 5 ON.
WRITE :/10 'COUNTRY',
          20 'YEARS',
          35 'MON01',
          45 'MON02',
          55 'MON03',
          65 'MON04',
          75 'MON05',
          85 'MON06',
          95 'MON07',
          105 'MON08',
          115 'MON09',
          125 'MON10',
          135 'MON11',
          145 'MON12',
          170 'total wdays'.
FORMAT COLOR OFF.
WRITE :/ SY-ULINE.
*&      Form display-data
      text
--> p1        text
<-- p2        text
FORM display-data .
LOOP AT ty_tfacs.
    WRITE :/10 ty_tfacs-ident,
            20 ty_tfacs-jahr,
            30 ty_tfacs-total1,
            40 ty_tfacs-total2,
            50 ty_tfacs-total3,
            60 ty_tfacs-total4,
            70 ty_tfacs-total5,
            80 ty_tfacs-total6,
            90 ty_tfacs-total7,
           100 ty_tfacs-total8,
           110 ty_tfacs-total9,
           120 ty_tfacs-total10,
           130 ty_tfacs-total11,
           140 ty_tfacs-total12,
           150 ty_tfacs-uk.
ENDLOOP.
ENDFORM.                    " display-data
*&      form get_string
      text
     -->p_0250   text
     -->p_0251   text
     -->p_0252   text
form get_string using    p_0250   " month
                          p_0251   " string
                          p_0252. " total
p_0250 = p_0251. " move month to string
TRANSLATE p_0250 USING '0 ' . " translate
CONDENSE p_0250 NO-GAPS.     " condense
p_0252 = STRLEN( p_0250 ).    " pass length of string to total
ENDFORM.                    " get_string
***&      Form write1-data
      text
     -->P_0306   text
     -->P_0307   text
     -->P_0308   text
     -->P_0309   text
     -->P_0310   text
     -->P_0311   text
     -->P_0312   text
     -->P_0313   text
     -->P_0314   text
     -->P_0315   text
     -->P_0316   text
     -->P_0317   text
     -->P_0318   text
     -->P_0319   text
     -->P_0320   text
*form write1-data using    p_0306
                          p_0307
                          p_0308
                          p_0309
                          p_0310
                          p_0311
                          p_0312
                          p_0313
                          p_0314
                          p_0315
                          p_0316
                          p_0317
                          p_0318
                          p_0319
                          p_0320.
*WRITE :/ p_0306,
        p_0307,
        p_0308 left-justified,
        p_0309 left-justified,
        p_0310 left-justified,
        p_0311 left-justified,
        p_0312 left-justified,
        p_0313 left-justified,
        p_0314 left-justified,
        p_0315 left-justified,
        p_0316 left-justified,
        p_0317 left-justified,
        p_0318 left-justified,
        p_0319 left-justified,
        p_0320 left-justified.
*ENDFORM. " write1-data
from this report what i am getting is year and its 12 months but my requirement is i will give date using select options and i should get the total no of working days in b/w this date.

Use the following code to find no of working days b/w given date. Use the correct factory_calendar_id in the function module. L_DAYS will display the required result:
PARAMETERS: p_date1 TYPE sydatum,
           p_date2 TYPE sydatum.
DATA: date1        LIKE scal-date,
     date2        LIKE scal-date,
     correction   LIKE scal-indicator,
     calendar     LIKE scal-fcalid,
     factorydate1 LIKE scal-facdate,
     workday1      LIKE scal-indicator,
     factorydate2 LIKE scal-facdate,
     workday2      LIKE scal-indicator,
     l_days TYPE scal-facdate.
CALL FUNCTION 'DATE_CONVERT_TO_FACTORYDATE'
EXPORTING
    date                       = p_date1
    correct_option             = '+'
    factory_calendar_id        = 'US'
IMPORTING
    date                       = date1
    factorydate                = factorydate1
    workingday_indicator       = workday1
EXCEPTIONS
    correct_option_invalid     = 1
    date_after_range           = 2
    date_before_range          = 3
    date_invalid               = 4
    factory_calendar_not_found = 5.
IF sy-subrc = 0.
CALL FUNCTION 'DATE_CONVERT_TO_FACTORYDATE'
    EXPORTING
      date                       = p_date2
      correct_option             = '+'
      factory_calendar_id        = 'US'
    IMPORTING
      date                       = date2
      factorydate                = factorydate2
      workingday_indicator       = workday2
    EXCEPTIONS
      correct_option_invalid     = 1
      date_after_range           = 2
      date_before_range          = 3
      date_invalid               = 4
      factory_calendar_not_found = 5.
IF sy-subrc = 0.
    l_days = factorydate2 - factorydate1.
    WRITE: / l_days.
ENDIF.
ENDIF.

Working days between two date fields and Changing Factory Calendar

Hi,
I have to calculate working days between two date fields excluding the weekends and public holidays for Switzerland.
I have written the routine using factory calender and its working fine except for two problems now:
1. If any one of the date field is empty then teh rsult should be zero.
2. And the below code is working from 1996 but my cleints wants it to work for years before 1996 as well.
I also tried to change the Start date in SCAL for factory calendar but it says enter values between 1995 to 2020.
I am new to ABAP. Please help me how i can achieve these for below code.
DATA: IT_HOLIDAYS type TABLE OF ISCAL_DAY,
      IS_HOLIDAYS TYPE ISCAL_DAY.
DATA: T_DATE TYPE SY-DATUM,
      P_DATE TYPE SY-DATUM.
DATA : X_DATE(4) TYPE C.
DATA: CNT TYPE I.
REFRESH : IT_HOLIDAYS.
CLEAR : IT_HOLIDAYS.
T_DATE = SOURCE_FIELDS-/BIC/ZCCCHP812.
P_DATE = SOURCE_FIELDS-/BIC/ZCCCHP810.
CALL FUNCTION 'HOLIDAY_GET'
EXPORTING
HOLIDAY_CALENDAR = 'CH'
FACTORY_CALENDAR = 'CH'
DATE_FROM = P_DATE
DATE_TO   = T_DATE
TABLES
HOLIDAYS = IT_HOLIDAYS
EXCEPTIONS
FACTORY_CALENDAR_NOT_FOUND = 1
HOLIDAY_CALENDAR_NOT_FOUND = 2
DATE_HAS_INVALID_FORMAT = 3
DATE_INCONSISTENCY = 4
OTHERS = 5.
DESCRIBE TABLE IT_HOLIDAYS LINES CNT.
X_DATE = T_DATE - P_DATE - CNT.
RESULT = X_DATE.
Please help
Regards
Zabina
Edited by: Syed786 on Nov 2, 2011 9:15 AM

Hi Zabina,
Try this function module 'DURATION_DETERMINE'.
Give the factory calendar and unit as DAY
With regards,
Rajesh

Sales order schedule date is a (working) day before Scheduled ship date

In MRP/MPS planning, the forecast consumption is occuring for all sales orders at a date (sales order schedule date) which is always a working day before the Scheduled Ship Date (SSD). What is the logic?
Time fences are not used.
E.g. Sales order is scheduled to ship (SSD) on 30th Nov, in forecast set > Forecast items > Consumptiion > Detail, the sales order schedule date is a day before SSD.

Hi,
This is a complex issue; best solution is by using APO/GATP.
If not, then in ERP only, the second best is:
1) Work with assembly processing in SO, meaning that a production/planned order is automatically created in the customer order during order creation.
2) Then, after the order is created it is scheduled, and the delivery date proposal is based on that.
3) Now you can check in the order that there are no capacity overloads, and all capacity required to produce on the proposed date is available. If yes, you're done. If not, it gets a bit complex, since you actualy need to switch to capacity planning, do capacity leveling and dispatch (PP), and the you get a new feasible schedule proposal based on that.
APO/GATP could do all that automatically!
Regards,
Mario

Working day to factory calendar date

Hello Experts,
I wish to get the factory calendar date, specific to a factory calendar, based on a working day.
Basically, if i pass say 4, then i want to get the date for the 4th working day based on a specific factory calendar.
Can someone throw some light on possible function module that i can use in BW ?
Thanks

That's what I was giving you, you give the working day and the factory calendar and you get the date, or you can use this function and you can do it the other way:
(Unless I'm completely missing your point here...)
    CALL FUNCTION 'DATE_CONVERT_TO_FACTORYDATE'
EXPORTING
    CORRECT_OPTION                     = '+'
    DATE                               = G_WORKAREA3-CREATEDON
    FACTORY_CALENDAR_ID                = L_S_PLANT-FACTCAL_ID
IMPORTING
*   DATE                               =
   FACTORYDATE                        = L_FCDATE
EXCEPTIONS
    CALENDAR_BUFFER_NOT_LOADABLE       = 1
    CORRECT_OPTION_INVALID             = 2
    DATE_AFTER_RANGE                   = 3
    DATE_BEFORE_RANGE                  = 4
    DATE_INVALID                       = 5
    FACTORY_CALENDAR_NOT_FOUND         = 6
    OTHERS                             = 7.
ENDIF.

Calculation of no. of working days (per Factory Cal) between 2 date chars

This question could be considered to be in continuation of a previous post called "Working days of month with factory calendar"
I have two date Characteristics: say Date1 and Date2. I need to find the number of working days between them based on the factory calendar.
(And yes we have already defined the default factory calendar in IMG under 'General Reporting settings' ).
The previous post proposed the following:
1) Convert date1 into factorydate (standard functionmodule)
2) Convert date2 into factorydate (standard functionmodule)
Perform date1 - date2 to get number of working days.
I agree that there is a std function module to convert cal date to factory date called: 'DATE_CONVERT_TO_FACTORYDATE'
But what are the steps for calling the conversion? Should I create a new Formula variable of 'Customer Exit type' give it a name and define the Function module in CMOD? But then how do I attach the formula variable to the date characteristic. Note that my infoobjects are Chars so I cannot do date1- date2 in the query as is possible with keyfigures!
Please help! (my version is BW 3.0)
Thanks
Naresh

Hi,
For the above scenario when you need to calculate date 1 - date 2. we can't build a new formulae or calculated KF directly because those are the chars.
So we need make chars to act as KF through Formulae with replacement path.
create a formulae variable on those 2 Date chars with Processing type as replaccement then those 2 Dates can be avilable to build a formulae as ur requirement.
Let me know if you need any more information.
Thanks,
Raju

Delivery Date should propose only working days (Excluding weekends and holidays

Hello All
I have one requirement here, where delivery dates should propose only working days and it should not allow to add weekends and holidays during the creation of sales order.
I would like to know if there are any standard settings to be done in plant or shiping point?
Kindly need all your input on this
Thanks
Naveen

Hello All
Same calendar has already been assigned in shipping point,plant and sales org and also in the calendar holidays been maintained, even though when we create a sales order it will accept weekends and holidays
Thanks

How to set the payment Due date calculation as per working days.

how to make changes in the vendor Payment terms so that while calculating the Payment due date as per Payment terms, system calculates it based on Working Days & not the Calender days ?
Help is much appriciated.
Thank you,
Amit

Hi,
This is the standard settings by SAP, normally we couldn't change it to working day.
Good luck
Tao

Payment terms should calculate Payment due date based on working days

Hi Experts,
As we know that standard SAP calculates Payment due date= base line date + number of days maintained in payment terms. In this payment days are considered as calendar days and not the working days.
Example: If base line date is Thursday, payment terms says 3 days then payment due date is calculated as Sunday ( which is not a working day as per the factory calendar I use). The requirement is that payment date should be calculated as following Tuesday considering Satuarday and Sunday are not working days as per the calendar.
Can you please suggest how can we achieve this?
Thanks,
Ravi

You can not acheive from config pooint of view but you can use BADI and get the solution
use BAdI MRM_PAYMENT_TERMS to set terms of payment
You can use this Business Add-In to change the following fields for the
terms of payment in the invoice document header:
o ZFBDT: Base date for due date calculation
o ZBD1T: Discount days 1
o ZBD1P: Discount percentage 1
o ZBD2T: Discount days 2
o ZBD2P: Discount percentage 2
o ZBD3T: Deadline for net condition
o ZLSPR: Key for payment block

Add 12 working days to a date

I have a date, let's say 01.01.2007, and I want to postpone the date by 12 working days.
"working days" in my case shall mean only monday to friday, not saturday and sunday, and I do not case about public holidays.
Is there are function module or something like this to do this calculation?

check this below link
Factory Calendar
u can also have a look into these links
Getting a date based on factory calendar
Function module to get the no.of working days between START and END dat
I want to find the No.of working days between the two dates
i think it is useful for u
SANTOSH..

Add working days to a date excluding weekends and holidays

Hi there,
I need to write a function that will take a specified date and number of days to add as input parameters, and return the working day based on the number of days to add parameter, excluding weekends and any holidays held in a holiday table.
Here is my function so far -
CREATE OR REPLACE FUNCTION f_add_work_days(pd_date IN DATE
,pn_add_days IN PLS_INTEGER) RETURN DATE IS
pd_in_date DATE := pd_date;
ld_next_holiday DATE;
ln_days_left PLS_INTEGER := pn_add_days;
CURSOR cu_holiday(pn_date IN ge740.holdte%TYPE) IS
SELECT pck_utility.f_dtcnv(g.holdte)
FROM ge740 g
WHERE g.holdte >= pn_date
AND g.maint <> 'D'
ORDER BY g.holdte ASC;
BEGIN
OPEN cu_holiday(pck_utility.f_dtcnv(pd_in_date));
FETCH cu_holiday
INTO ld_next_holiday;
CLOSE cu_holiday;
LOOP
IF ln_days_left = 0 THEN
EXIT;
END IF;
pd_in_date := pd_in_date + 1;
IF pd_in_date > ld_next_holiday THEN
OPEN cu_holiday(pck_utility.f_dtcnv(pd_in_date));
FETCH cu_holiday
INTO ld_next_holiday;
CLOSE cu_holiday;
END IF;
CASE
WHEN TO_CHAR(pd_in_date
,'fmDAY') = 'SATURDAY' THEN
pd_in_date := pd_in_date + 2;
ln_days_left := ln_days_left - 1;
WHEN TO_CHAR(pd_in_date
,'fmDAY') = 'SUNDAY' THEN
pd_in_date := pd_in_date + 1;
ln_days_left := ln_days_left - 1;
WHEN pd_in_date = ld_next_holiday THEN
pd_in_date := pd_in_date + 1;
ln_days_left := ln_days_left - 1;
ELSE
ln_days_left := ln_days_left - 1;
END CASE;
END LOOP;
RETURN(pd_in_date);
END f_add_work_days;
I think there is something wrong/missing in the logic as I can't get it to cater for say a double bank holiday(25/26th Dec - if the input parameters are 24/12/2007 and 2, which should return the 28th but returns the 26th!!).
I'm relatively new to PL/SQL and Oracle, so any help, advice, ideas would be greatly appreciated!
thanks in advance

smth like
SQL> with holidays as (select to_date('10.06.2007','dd.mm.yyyy') h_dt from dual),
2       par as (select to_date('08.06.2007','dd.mm.yyyy') dt, 2 add_days from dual)
3 --
4 select min(dt) needed_date
5    from (select p.*,
6                 h.*,
7                 mod(to_char(dt, 'j'), 7),
8                 sum(decode(mod(to_char(dt, 'j'), 7), 5, 0, 6, 0, 1)+--get rid of sat and sun
9                     nvl2(h_dt, -1, 0)--check if the day is holiday
10                     ) over(order by dt) s
11            from (select dt + level dt, add_days
12                    from par
13                  connect by level <= 100) p,
14                 holidays h
15           where h_dt(+) = dt
16           order by 1)
17   where add_days = s
18 /
NEEDED_DATE
13.06.2007
SQL> ?
Message was edited by:
Volder
PS What Oracle version are you on?

Netdue date alteration with next working day

Hi,
I have one report for Accounts Receivables .
In this when net due date falls on holiday, i need to shift this "net due date" to a next working day.
I have one FM "DATE_CONVERT_TO_FACTORYDATE" which i can use for the purpose.
As a input to this FM we need to give Factory calendar ID which is an attribute to Infoobject 0PLANT.
Unfortunately i do not have 0PLANT in my datamodel. But i do have 0COMP_CODE in my datamodel.
As i do not have any link between Factory calendar ID and 0COMP_CODE i am searching for an appropriate solution so that i could use this FM to shift net due date to Next working if the net due date is an holiday.
Any Ideas?

Simran
I am not sure if we can get a direct link from 0plant to 0comp_code, but you can enhance the master data of the 0company code to add the factory caledar and load them manually into 0plant.
Let me know if this helps..
Regards,
Avinash

6110 navigator working days date failure on alarm

Similar Messages

Maybe you are looking for