6233 Go to options list problem

When I deselect the Answer Phone option from the list that comes up when the Go to is pressed it reappears when I go back to it. I have no need for it to be on the list as all I have to do is press the number 1 key and hold it down. I have followed the instructions in the manual perfectly. There seems to be a problem with the software. This model of phone seems to be plagued with software problems. Can someone tell me how to ensure that this does not happen? Thanks

Yes I do press yes. The Answer Phone option disappears from the option list but after awhile it appears again. Very strange.

Similar Messages

Save as list problem

I have a save as/export problem. Im using cs6 for windows and it shows me 6 options for saving as psd, psb, exr, raw, bitmap, radiance and tiff but there is no jpeg or pdf or any other options listed. How can I bring these options to this list? is it a problem like fixing acrobat X with a patch?

Hi,
Check under Image>Mode as it sounds like maybe your image is 32 bits/channel.
If you switch to 16 or 8 bits/channel then jpeg should become available.

Why loading values... is populating in custom option lists

I have created the option list and i have added the values from the view. But values are not gettiing populated in the check-in form. why loading values... is populating in custom option lists

We have encountered a similar issue again. Therefore, I did a bit of a deeper request. I will write my findings, plus there are still few open questions.
First, the customer's issue: the customer wants to have its supplier's ids in documents' metadata. Vendors are populated to a custom database table in UCM's database from a third party system. The customer complains that updates to the custom table were not populated (they do updates in 30 minutes).
a) "loading values" reproduced: I tried to repeat the scenario as described in this issue with Srinath's advices. Even when I did Publish Schema/Publish Schema Base, the issue persisted. The one thing I had to do above that was restarting the browser (I used Mozilla Firefox). Therefore, I assume that values are cached somewhere in the browser and need to be refreshed first (no error in the log)
Q1: Does anybody have a clue how this could be automated? I clicked Check In New - Standard, so I would expect the values to be refreshed
b) I checked the relevant part in the manual (+Managing Repository Content+, chapter 7) and there I found this:
New or modified schemas are automatically updated during each scheduled publishing cycle. Because the default interval between each publishing cycle is set to four hours, you will not see immediate results for new or modified schemas. You can, however, adjust the interval between each publishing cycle by changing the default value of a configuration variable. For more information, see Modifying the Publishing Cycle Interval (page 7-12).
This explains the behavior and confirms Srinath's advices.
c) now, I created a testing table, view, and metadata field, linked it together following the advices. When I got it working I added a new value to the table in the database to find out that I am in problems again - at least this time, Publish Schema/Publish Schema Base did not seem to work for me and I had to restart the content server (which is hardly something I can do every 30 mins like our customer wants).
Q2: Is there a way how to force population of database table updates to views/option lists in UCM?

Application List problems - will Nokia ever addres...

The empty Application List problem on the Nokia Go To select options list is well known.
My new 5610 takes this a step further. When you try to select Applications List when choosing Go To options, the machine just hangs.
Has anyone else experienced this? I guess the phone's a bit new for a s/w upgrade...
Max

Please, dial *#0010# to determine which firmware version do you have.
Furthermore, what is the name of that theme you are using because that is non-standard, isn’t it?

How to get metadata option list values derived from a table/view using SOAP

I am writing an ASP.NET application that replicates some of the features of the SCS search interface. I have looked at the GET_DOC_METADATA_INFO service and its SOAP output. It has a few missing pieces of information, like the option list values for a field if that fields values are derived from a separate table/view. Some of the fields I am dealing with also make use of Dynamic Control Lists (DCL). Is there a way to get the DCL info using SOAP? I did notice that the dOptionListKey element contains the name of the view from which the option list values will be derived. However, I cannot find a service that takes the view name as a parameter to return the option list values. I have looked in the services reference manual, but I have not had any luck finding what I am looking for.
TIA
- Tyson
Message was edited by: Add the word 'get' to the subject.
Tyson

Hello,
What error you are getting? You code seems to be ok. I have tested below code and working fine
XPathNavigator rTable = MainDataSource.CreateNavigator();
String ddlSectionSelectedValue = Convert.ToString(rTable.SelectSingleNode("/my:myFields/my:ddlSection", NamespaceManager).Value);
One think you can check that keep dropdown value display name and id same.
Hemendra:Yesterday is just a memory,Tomorrow we may never see<br/> Please remember to mark the replies as answers if they help and unmark them if they provide no help

Excel Named Items not showing up in Browser View Options list

Hi,
Using excel 2013 - when I create named ranges under the 'formulas' tab, I expect to see them show up in the 'show' tab under Browser View options. However they aren't there - when I look at the 'items in the workbook' list I only see the charts and
pivot tables in my workbook, not the named items.
Is there some setting I need to flip on to see these times (and then use them in sharepoint)?
Thanks

Today, I tried it again and now I could see the Name range under Browser View Options list, this is my step as below:
1. Type the value in Cell A1 to B4. (Same as the screenshot as the last reply)
2. Directly type Test in Name Box.
3. Go to File > Info > Browser View options > Items in the Workbook.
Now the Name is appearing.
But when we define a name to a blank range, we would not see the Name in the Browser View options anymore. Try in your site.
By the way, My using version is Office 36 ProPlus, version 15.0.4551.1005.
Cheers,
Tony Chen
Forum Support
Come back and mark the replies as answers if they help and unmark them if they provide no help.
If you have any feedback on our support, please contact
[email protected]

How To Remove Standard CheckIn Form in CheckIn menu option list

Hi to all.
I need To Remove Standard CheckIn Form in CheckIn menu option list.
I want to use only my customized profiles.
Is there any doc or sample related.
Thanks in advance,
Soni

Unfortuantely, you must create your own custom component. I'm not going to explain how to do that since that requires a lot of typing, but if/when you decide to tackle that, you will need to include this in your resource file:
<@dynamichtml custom_finish_layout_init@>
<$include super.custom_finish_layout_init$>
navBuilder.deleteItem('MY_PERSONAL_CHECKINS_'+pneCheckinDocProfiles.length);
<@end@>
However, keep in mind this is what I use for my content server (10gR3 with CS10gR3CoreUpdate component, build 186). I have no idea what future patches may or may not have done with profile naming conventions or changes. I'm confident this will still work, but cannot be for certain.
Good luck.
PS. Please award points if deemed necessary

How do you add Blind Copy to the options listed in the mail address book?

My I-Mac is the 20 inch Intel model running OS 10.4.7 and mail is 2.1.1.
When trying to forward mail I can chose Bcc by going to "View" and selecting Bcc, but then when I go to the address book to select the names that I want to Bcc there are only two options listed in the address book and they are "To and Cc". The only way that I have been able to set the addresses into the forwarding message is to drag each address from the address book and place it into the Bcc field on the forwarded note. There must be some way to enable the address book to list Bcc. Does anyone know how? Thanks
Bill
I-Mac Model 5,1 Mac OS X (10.4.7) 1 Gig ram/Intel core 2 Duo
I-Mac Model 5,1 Mac OS X (10.4.7) I-Mac Intel 2 Duo

Hi Austin,
Thanks for the response, but you kind of misunderstand my question. I actually want something much simpler than this:
When the Mail.app Data Detection recognises a telephone number or address, via a drop-down menu, I have the option to create a new contact or add the data to an existing contact. If I want to create a new AddressBook contact I am presented with a pop-up. This pop-up gives me the choice to enter a persons name, or by ticking the box, designate the entry as a company. I can edit the person's or company's name - this is often necessary as Data Detection, though generally quite good, doesn't always pick the correct data; for instance when the data is in the body of a forwarded e-mail. But what I can't seem to do is edit the entry to include a Contact Name and a Company Name. I may have to hand enter this information, I can accept that, but what I want to avoid is having to move away from Mail, open AddressBook and complete the contact creation therein.
What I simply require is the option to enter at least the standard AddressBook 'new contact' template fields from within Mail. So I need to know: Is there is a way of configuring the pop-up fields beyond the Mail.app defaults?
I hope this makes sense..
Thanks again..

Option list in Forms WEB.

I have a forms with a block based on a database package with 3 fields: A, B e C. If A is an option choice, the application shows the option list appropriated. In the client-server, it works perfectly. In the WEB, doesn´t show the option list (it´s the same application in both options). Tried everythimg i know to fix that and still nothing. Anyone can help me ? (database 9.2.1.0, forms 6i)

Try it with an empty new form and create a list item. Is it reproducable ?

Upgrading from SL to ML: Instructions/Options list?

HI.
Been using SL and very happy with the stability and good use.
I have purchased ML and my machine can be upgraded. I'm just a nervous cookie about doing it. I wouldn't, except a lot of my favorite Applications have either stopped updating for SL or will be doing so soon. They all appear to at least support ML.
I know I could go to MAV (free), but I am really, really nervous about that. Having to deal with ML (the autosave feature, versions, etc. - just dragging my feet!)
Anyway, I need a really good Instruction and Option list. Things I need to do before, during, and after. Maybe even something I could print.
I have Time Machine backups, separate backups of data, etc.
So far from what I've read, I want to do a CLEAN install, and during Setup transfer ALL users. Correct?
Thanks for help.
Linda (✿◠‿◠)

Firstly, you don't have to transfer users because you are upgrading one machine, not moving to a new machine. Secondly, there's not much to be nervous about if you take some precautions.
1. Repair your hard drive and permissions using Disk Utility. You must first boot from your Snow Leopard DVD to do this.
2. Get a freshly erased external drive and make a cloned backup of your current system. You also use Disk Utility for this while booted from the Snow Leopard DVD.
3. Use your redemption code to download Mountain Lion from the App Store.
4. Upgrade your computer.
Note that you DO NOT need to do a CLEAN install.
Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
Clone using Restore Option of Disk Utility
1. Open Disk Utility in the Utilities folder.
2. Select the destination volume from the left side list.
3. Click on the Restore tab in the DU main window.
4. Select the destination volume from the left side list and drag
it to the Destination entry field.
5. Select the source volume from the left side list and drag it to
the Source entry field.
6. Double-check you got it right, then click on the Restore button.
Destination means the external backup drive. Source means the internal startup drive.

Select (html option list) data not showing up on server

Okay, I have a select option list, which is implemented as a list box, like so:
<SELECT NAME="myList" MULTIPLE SIZE=10>...and I add stuff to this list, and it grows and grows, but then when I submit the form, no data comes over. Here's an example of what the HTML looks like before submitting:
<OPTION VALUE="PW1868J76006">PW1868J76006 / Vane Segment W501G Row 1</OPTION>
<OPTION VALUE="PW1868J73G01">PW1868J73G01 / Vane Segment W501G Row 3</OPTION>... and i have other form elements that get populated and the data makes it back and forth no prob. So I know that EVERYTHING is working fine except that when the form is populated (automagically via struts), it completely ignores the data in the list box.
How can I capture this data?

Why do you want all sent across ? Okay, I explained this above. You search for stuff, you get 100 results in a list box. Then you select say 10 of them and hit the ADD button which adds those 10 to a DIFFERENT list box. The list box you are adding to here represents the search results you care about. So you search, add some, search again, add some, etc. Finally, you submit and EVERYTHING in the 2nd list box should be sent to the server, because those represent the users' choices.
What if the user
selects only 2 (or 3). If you do want all sent
across, maintain them in a session or something on
the server, why bring it over to the browser ?TWhen they search, the submit happens and thier search results are lost unless I persiste them back and forth. Remember, it's not a single search, it's as many as they want. If I don't bring it to the browser, then how can they remove stuff if they change thier mind?
OK, even if your requirements are such, you could
write a script that selects all on submit which would
ensure that all data does get through to the server.
But then what if the user selected say 3 options and
want only that to be 'selected' and not the whole set
? Your script would still cut in on submit and select
all irrespective of user selection - the ui and the
flow wouldnt be too intuitive, IMO.Good point!!! :-)

HT201210 Contact List Problem.   I have duplicates on my iPhone. I turned off my Contact and selected "Delete Contacts" Most of the contacts were deleted but about 120 were left on my phone.   I've tried selecting individual contacts and deleting them,

Contact List Problem.   I have duplicates on my iPhone. I turned off my Contact and selected "Delete Contacts" Most of the contacts were deleted but about 120 were left on my phone.   I've tried selecting individual contacts and deleting them, No Go.
Can anyone help?   How do I get rid of these contacts so I can re-synch my iPhone.

I have exactly the same problem on my ipad. It is happening on only some contacts but, as with you, when I delete one of the contacts on the ipad, the second ipad contact and the contact on the imac are also deleted. This is even the case when I have differentiated the two contacts on the ipad and can see the one I have deleted on the ipad is not the same one as is then deleted on the imac.

The passcode is required immediately on my 5s with NO OTHER OPTIONS listed. How can I change this?

The passcode is required immediately on my 5s with NO OTHER OPTIONS listed. How can I change this?
On my iPhone 4 I could choose immediately, 5 minutes, 15 minutes etc.
My 5s seems to have a default of immediately but no other options are listed.
Ideas? Thanks

If you are using Touch ID "Immedeatly" is the only option for requiring a passcode.

Filter option lists

Hi all!
Is there any way to filter the values of a option list based on a dynamic criteria??
For example, I want to show only some values of a metadata based on a view. These values depends of a user metadata (maybe username, role, address...whatever) which is not shown in the form, so I could not use dependent field option.
Also, I cannot use the filter options in the view configuration because I have to modify and alter the filter string.
I have tried to create a component to alter the resultset, but in some way, the values are loaded after the form is build. Am I right?
Can anyone help me? Thanks in advance.

Read this: http://docs.oracle.com/cd/E23943_01/doc.1111/e10978/c03_repository.htm#CSMRC434
"Application fields are custom fields that you can use to customize forms and screens. With application fields, you can add features such as dependent lists to forms. You can also use application fields in custom components, HCSP (Hypertext Content Server Page) files, and HCSF (Hypertext Content Server Form) files.
By default, application fields do not appear on the standard check-in and search forms, but are used by custom templates. You can use application fields as placeholders or with schema views to enable dependent lists without creating an associated metadata field. For details, see Section 3.1, "Using Schemas to Customize Metadata."
You can specify in a content profile that application fields are displayed on the standard check-in and search pages. For details, see Section 3.2, "Using Profiles to Customize Content Screens.""

TS1398 Despite trying the recommended options listed above, my Ipad will not connect to our home Wi-Fi. The problem has only started happening this morning. The ipad recognises the wi-fi network but will not connect.

Despite trying the recommended trouble shooting options, my I pad will not connect to our home Wi-Fi network. The problem only started occurring this morning, and although it will recognise the Wi-Fi network, it will not connect.
Any other options I can try????

Try rebooting the router. Just pull the power for a few seconds. No settings are lost.

6233 Go to options list problem

Similar Messages

Maybe you are looking for