64 bit mod_jk for Solaris 10

Hello
Has anyone been able to successfully compile a 64 bit version of mod_jk compatible with apache 2.2 on Solaris 10 (SPARC)
I got hold of Sun Studio 12 update 1 and tried to build a 64 bit version of apache before compiling mod_jk as a prereq. But running into various issues.
Was hoping if some one has the steps document that can be used as a reference.
Thanks

I am pretty confident that you need the 64 bit JVM for your platform, then you need to use the generic installer, this is based on how it has been done in prior releases.
So you can find the available JVM's for your platform here:
http://www.oracle.com/technology/software/products/ias/files/oracle%20fusion%20middleware%2011gr1%20(11%201%201%201%200)%20certification%20matrix.xls
In this case that would be Sun JVM 1.6.0_11+
OR
JRockit 6 Update 5 R27.6.2+
Then you should be able to run the generic installer here with that downloaded supported JDK:
http://www.oracle.com/technology/software/products/ias/htdocs/wls_main.html
I was not able to find anything specific on the documentation pages that described this process in detail, but you can always open a support case to get some assistance. I will check with the documentation team to see if that is going to be documented or already is.
If you look at the 10gR3 releases, it shows how the generic installer is used, for example:
http://e-docs.bea.com/platform/suppconfigs/configs/solaris/solaris10_103.html#104355

Similar Messages

  • Sun Cluster 3.1 64 bit support  for Solaris 10

    Hi:
    I have some questions when migrate SC 3.1 from solaris 9 to solaris 10.
    1) Does Clutster 3.1 for solaris 10 support 64 bit?
    I have develop own resource type which is compiled with 64 bit mode, while cluster admin program is 32 bit based. E.g. /usr/cluster/bin/scrgadm
    Will that cause any problem? For instance: 32 bit lib and 64 bit lib have the same name libscha.so will be loaded by 32 bit scrgadm and 64 bit my own developped resource type program.
    2) Can I download a Cluster 3.1 install-pkg for solaris 10, 64 bit supported., which means all admin files like scrgadm are 64 bit based.
    Or only ONE Cluster 3.1 version for solaris 10 is deliveried by SUN?
    Thanks in advance!
    BRs
    //rdctahu

    Hi,
    Comments on your 2 questions:
    1) Yes. IIRC, SC31 for S10 actually supports ONLY 64 bit. To be clear, this means
    Solaris has to be booted in 64 bit mode, but 32 bit applications would run just
    fine.
    As for your RT being 64 bit, and scrgadm being 32 bit, no problem.
    2) See (1). You are good.
    Go for it.
    HTH,
    -ashu

  • 64-bit JRE for Solaris 10 x86

    I understand that this is not one of the supported configurations at this time. Could anyone comment if there are plans to support 64-bit Java on Solaris 10 x86?
    Cheers,
    ~george

    On the x86 solaris 10 system I'm looking at there is
    a client VM
    /bin/java -client -version
    java version "1.5.0_12"
    Java(TM) 2 Runtime Environment, Standard Edition (build 1.5.0_12-b04)
    Java HotSpot(TM) Client VM (build 1.5.0_12-b04, mixed mode)
    and a server VM
    /bin/java -server -version
    java version "1.5.0_12"
    Java(TM) 2 Runtime Environment, Standard Edition (build 1.5.0_12-b04)
    Java HotSpot(TM) Server VM (build 1.5.0_12-b04, mixed mode)
    For the client the 64bit VM is still in development. I don't
    think there are dates established for that yet.
    If you can use the server VM, then you need to down
    load the 64bit binaries. Then you will see
    /bin/java -server -d64 -version
    java version "1.5.0_12"
    Java(TM) 2 Runtime Environment, Standard Edition (build 1.5.0_12-b04)
    Java HotSpot(TM) 64-Bit Server VM (build 1.5.0_12-b04, mixed mode)
    The downloads are at (look for the release you want)
    http://java.sun.com/javase/downloads/index.jsp
    Hope that helps.

  • Weblogic 8.1 64-bit version for Solaris 8....

    Is there a version of Weblogic 8.1 available for the Solaris 8 64-bit O/S? The
    version available for download specifically says 32-bit.
    Thanks,
    Sridhar

    Sridhar Krishnaswamy wrote:
    Is there a version of Weblogic 8.1 available for the Solaris 8 64-bit O/S? The
    version available for download specifically says 32-bit.
    Thanks,
    SridharThe 32-bit versions are upward compatible.
    /wws

  • Is there a 64-bit gdb for Solaris (I need both x86 and Sparc)

    I'm looking for publicly available versions of gdb for both SPARC and Intel. I'm the current
    developer of the NetBeans gdb module and we've had bugs filed that our Solaris users
    can't debug 64-bit applications.
    I've built a 64-bit gdb but its trying to dynamicly load a 32-bit .so (libexpat.so.0). I can still
    run it by setting LD_LIBRARY_PATH, but can't figure out how to configure my gdb build
    to use the right libexpat. Even if I could, I need something like the companion CD or
    sunfreeware.com to provide (I'd even settle for gdb.gnu.org:-)
    If anyone knows of publicly available versions, please email me.
    Thanks,
    Gordon

    Again, I think you need to check the Microsoft web page, as I was able to find 64 bit versions of IE8 for download.
    The URL to access the page is
    http://windows.microsoft.com/en-US/internet-explorer/downloads/ie-8
    From that page, I am able to select a 64 bit version of IE 8 for the following Operating Systems
      -- Windows XP 64 Bit
      -- Windows Vista 64 Bit
      -- Windows Server 2003 64 Bit
      -- Windows Server 2008 64 Bit
    Windows 7 is not listed as an option as it already comes with IE8 installed by default.
    Looks to me that Microsoft has already released a 64 bit version of IE8.
    In fact, I went ahead and downloaded IE8 for Windows 2003 Server x64 bit, and looked at the details of the file.  Each microsoft download has a digital signature associated with them, showing a date and time of when the exe was built.
    According to what is shown below, IE8 for Windows Server 2003 has been around since Sunday, March 08, 2009.
    So, what has adobe been doing since March of 2009?  IE8 has been 64 bit for well over 2 years now (it will be 3 in March of 2012). While I know that it does take time to develop new applications, I don't think it would take 3 years for Adobe to come up with a 64 bit version of Reader that could have been built under the 64 bit platform.
    --Brian

  • Can't download Oracle 8.1.7 Enterprise Edition for Solaris 32 bit??

    I can't download Oracle 8.1.7 Enterprise Edition for Solaris 32 bit. After filling out the form with the questions...I click on the actual link, but the box never pops up. The status bar on my Internet Explorer slowly increases, but never allows me to download. It just hangs. I have tried multiple times, and I can download other verions from your site...and have many times in the past. Could you please fix this. Thanks.

    I've looked at it and it seems fine. It might have been a temporary glitch - let us know if you continue to have trouble.
    OTN

  • Mod_jk for apache2, tomcat 5 and solaris 10

    when i compile mod_jk in solaris 10 x86 box it shows following error:
    /bin/bash /var/apache2/build/libtool --silent
    --mode=compile gcc -I/usr/apache2/include -g -O2 -O
    -xarch=386 -xchip=pentium -xspace -Xa -xildoff
    -DSSL_EXPERIMENTAL -DSSL_ENGINE -DHAVE_APR
    -I/usr/share/src/apache2/srclib/apr/include
    -I/usr/share/src/apache2/srclib/apr-util/include -g
    -O2 -DSOLARIS2=10 -D_POSIX_PTHREAD_SEMANTICS
    -D_REENTRANT -I /usr/jdk/entsys-j2se/include -I
    /usr/jdk/entsys-j2se/include/ -c jk_ajp12_worker.c -o
    jk_ajp12_worker.lo
    gcc: unrecognized option `-Xa'
    gcc: unrecognized option `-KPIC'
    gcc: language ildoff not recognized
    gcc: jk_ajp12_worker.c: linker input file unused
    because linking not done
    mv: cannot access .libs/jk_ajp12_worker.lo
    *** Error code 2
    make: Fatal error: Command failed for target
    `jk_ajp12_worker.lo'
    Current working directory
    /Desktop/jakarta-tomcat-connectors-1.2.14.1-src/jk/native/common
    *** Error code 1
    The following command caused the error:
    set fnord $MAKEFLAGS; amf=$2; \
    dot_seen=no; \
    target=`echo all-recursive | sed s/-recursive//`; \
    list='common apache-2.0'; for subdir in $list; do \
    echo "Making $target in $subdir"; \
    if test "$subdir" = "."; then \
    dot_seen=yes; \
    local_target="$target-am"; \
    else \
    local_target="$target"; \
    fi; \
    (cd $subdir && make $local_target) \
    || case "$amf" in *=*) exit 1;; k) fail=yes;; *)
    exit 1;; esac; \
    done; \
    if test "$dot_seen" = "no"; then \
    make "$target-am" || exit 1; \
    fi; test -z "$fail"
    make: Fatal error: Command failed for target `all-recursive'
    i'm using apache 2 that is included in solaris 10 package, tomcat 5.5.17 and jakarta-tomcat-connectors-1.2.15.
    please help.
    mnio

    Hi
    i am also face problem in mod_jk for apache 2.2.0
    I have done installation of apache 2.2.0 on Solaris 10_x86 .Problem in Solaris OS .But i face problem in tomcat connecter on Solaris 10_x86.
    I make theses step in Solaris 10.
    I download connector tomcat-connectors-1.2.25-src.tar.gz
    # gunzip tomcat-connectors-1.2.25-src.tar.gz
    # cd \tomcat-connectors-1.2.25-src\native
    #./ buildconf.sh
    # ./configure - - with - -apxs=/usr/local/apache2/bin/apxs after run this command make new file.File name is Makefile
    Edit in Makefile and parameter -Wl,-brtl
    Run make command for tomcat-connectors (mod_jk) compiling
    bash-3.00# make
    Making all in common
    /usr/local/apr/build-1/libtool silent mode=compile gcc -I/usr/local/apache2/include -g -O2 -L/usr/local/lib -R/usr/local/lib -L/usr/local/ssl/lib -R/usr/local/ssl/lib -L/usr/openwin/lib -R/usr/openwin/lib -DHAVE_APR -I/usr/local/apr/include/apr-1 -I/usr/local/apr/include/apr-1 -g -O2 -DSOLARIS2=10 -D_POSIX_PTHREAD_SEMANTICS -D_REENTRANT -D_LARGEFILE64_SOURCE -I /include -I /include/ -c jk_ajp12_worker.c -o jk_ajp12_worker.lo
    /usr/local/apr/build-1/libtool[384]: /usr/local/bin/sed: not found
    /usr/local/apr/build-1/libtool[384]: /usr/local/bin/sed: not found
    /usr/local/apr/build-1/libtool[709]: /usr/local/bin/sed: not found
    *** Warning: inferring the mode of operation is deprecated.
    *** Future versions of Libtool will require --mode=MODE be specified.
    /usr/local/apr/build-1/libtool[1003]: /usr/local/bin/sed: not found
    /usr/local/apr/build-1/libtool[1003]: /usr/local/bin/sed: not found
    /usr/local/apr/build-1/libtool[1003]: /usr/local/bin/sed: not found
    /usr/local/apr/build-1/libtool[1003]: /usr/local/bin/sed: not found
    /usr/local/apr/build-1/libtool[1003]: /usr/local/bin/sed: not found
    /usr/local/apr/build-1/libtool[1003]: /usr/local/bin/sed: not found
    /usr/local/apr/build-1/libtool[1003]: /usr/local/bin/sed: not found
    /usr/local/apr/build-1/libtool[1003]: /usr/local/bin/sed: not found
    /usr/local/apr/build-1/libtool[1003]: /usr/local/bin/sed: not found
    /usr/local/apr/build-1/libtool[1003]: /usr/local/bin/sed: not found
    /usr/local/apr/build-1/libtool[1003]: /usr/local/bin/sed: not found
    /usr/local/apr/build-1/libtool[1003]: /usr/local/bin/sed: not found
    /usr/local/apr/build-1/libtool[1003]: /usr/local/bin/sed: not found
    /usr/local/apr/build-1/libtool[1003]: /usr/local/bin/sed: not found
    /usr/local/apr/build-1/libtool[1003]: /usr/local/bin/sed: not found
    /usr/local/apr/build-1/libtool[1003]: /usr/local/bin/sed: not found
    /usr/local/apr/build-1/libtool[1003]: /usr/local/bin/sed: not found
    /usr/local/apr/build-1/libtool[1003]: /usr/local/bin/sed: not found
    /usr/local/apr/build-1/libtool[1003]: /usr/local/bin/sed: not found
    /usr/local/apr/build-1/libtool[1003]: /usr/local/bin/sed: not found
    /usr/local/apr/build-1/libtool[1003]: /usr/local/bin/sed: not found
    /usr/local/apr/build-1/libtool[1003]: /usr/local/bin/sed: not found
    /usr/local/apr/build-1/libtool[1003]: /usr/local/bin/sed: not found
    /usr/local/apr/build-1/libtool[1003]: /usr/local/bin/sed: not found
    /usr/local/apr/build-1/libtool[1054]: /usr/local/bin/sed: not found
    : compile: cannot determine name of library object from `'
    *** Error code 1
    make: Fatal error: Command failed for target `jk_ajp12_worker.lo'
    Current working directory /export/home/apache/tomcat-connectors-1.2.25-src/native/common
    *** Error code 1
    The following command caused the error:
    failcom='exit 1'; \
    for f in x $MAKEFLAGS; do \
    case $f in \
    *=* | --[!k]*);; \
    k) failcom='fail=yes';; \
    esac; \
    done; \
    dot_seen=no; \
    target=`echo all-recursive | sed s/-recursive//`; \
    list='common apache-2.0'; for subdir in $list; do \
    echo "Making $target in $subdir"; \
    if test "$subdir" = "."; then \
    dot_seen=yes; \
    local_target="$target-am"; \
    else \
    local_target="$target"; \
    fi; \
    (cd $subdir && make $local_target) \
    || eval $failcom; \
    done; \
    if test "$dot_seen" = "no"; then \
    make "$target-am" || exit 1; \
    fi; test -z "$fail"
    make: Fatal error: Command failed for target `all-recursive'
    Please help me. My E-mail ID is [email protected]

  • When will 11.1.0.7 will be available for Solaris (SPARC) (32-bit)?

    Hi
    Does any of you know when 11.1.0.7 for "Solaris Operating System (SPARC) (32-bit)" will be available for download on http://www.oracle.com/technology/software/tech/oci/instantclient/index.html ?
    The reason for my question is that 11.1.0.6 contains a bug (at least on Solaris) causing it to reserve approx 180M swap for each client started!
    Regards
    Mads

    Just became available on http://www.oracle.com/technology/software/tech/oci/instantclient/htdocs/solsoft.html

  • Solaris 10  x86 mod_jk for Apache to Tomcat compilation error

    Hi,
    I try to figure it out how to compile the sources of mod_jk under Solaris 10 x86 on v20z server. The configuration goes right. But when I try to use make. This error appears. The version of mod_jk is 1.1.14. Can anybody help with this probleme?
    Here is the result of the make:
    gcc: .libs/mod_jk.o: No such file or directory
    gcc: ../common/.libs/jk_ajp12_worker.o: No such file or directory
    gcc: ../common/.libs/jk_connect.o: No such file or directory
    gcc: ../common/.libs/jk_msg_buff.o: No such file or directory
    gcc: ../common/.libs/jk_util.o: No such file or directory
    gcc: ../common/.libs/jk_ajp13.o: No such file or directory
    gcc: ../common/.libs/jk_pool.o: No such file or directory
    gcc: ../common/.libs/jk_worker.o: No such file or directory
    gcc: ../common/.libs/jk_ajp13_worker.o: No such file or directory
    gcc: ../common/.libs/jk_lb_worker.o: No such file or directory
    gcc: ../common/.libs/jk_sockbuf.o: No such file or directory
    gcc: ../common/.libs/jk_map.o: No such file or directory
    gcc: ../common/.libs/jk_uri_worker_map.o: No such file or directory
    gcc: ../common/.libs/jk_ajp14.o: No such file or directory
    gcc: ../common/.libs/jk_ajp14_worker.o: No such file or directory
    gcc: ../common/.libs/jk_md5.o: No such file or directory
    gcc: ../common/.libs/jk_shm.o: No such file or directory
    gcc: ../common/.libs/jk_ajp_common.o: No such file or directory
    gcc: ../common/.libs/jk_context.o: No such file or directory
    gcc: ../common/.libs/jk_status.o: No such file or directory
    make[1]: *** [mod_jk.la] Error 1
    make[1]: Leaving directory `/install/jakarta-tomcat-connectors-1.2.14.1-src/jk/native/apache-1.3'
    make: *** [all-recursive] Error 1
    Anybody can help???

    You have to run "make clean" and then make.
    Probably the files could not be compiled because of errors in the first place.
    Try to download the source for apache and compile it for the current platform, otherwise you could get wrong settings.

  • Grid Control Agent for Solaris 10 x86 32bit (not 64 bit)

    Hi,
    I am trying to locate the 32 bit version of Solaris 10 x86 agent for Grid Control OEM 11g (11.1.0.1.0).
    There is only a X86 64 bit version listed at the download site.
    My isainfo shows that solaris install is 32 bit.
    Does anybody know if a 32 bit version of the agent for Grid Control 11g is available.

    No ..Its not available yet.
    Please contact Oracle Support.
    Regards
    Rajesh

  • Workshop (WebLogic 10.2 MP1) not available for Solaris 10 SPARC 64 bit?

    Hi All,
    When Workshop for WebLogic 10.2 MP1 will be available for Solaris 10 SPARC 64 bit.
    I could find "WebLogic 10.2 MP1 for Solaris 10 SPARC 32 bit" but not for SPARC 64 bit!!
    otherwise guide me to download page.
    Thanks and Regards
    Arunachalam.C
    Edited by: arungoin on Feb 16, 2011 4:55 PM

    I found by issue "mount -v" that our disk slices are
    UFS type. So we don't need apply patch 5257399,
    right? Please confirm. Thanks!!!For your information, you are asking the user community to confirm, not Oracle. Some (many?) of us are not employed by Oracle.
    Therefore, the only answers you can get are from 'friends'. Nothing would be official and Oracle (and Oracle Support) would not be legally responsible.
    Your safest bet would be to escalate the request wityh Oracle Support.

  • JDK 1.5.0_08 for Solaris 10 Intel 64 bit

    Hi,
    I need the JDK 1.5.0_08 installation for Solaris 10 running on an Intel 64 bit machine.
    I searched the Sun site for this but I can't seem to find it and I don't know if it exists.
    Ideally I require JDK 1.5.0_08 but if it doesn't exist I can move up versions.
    Any ideas?
    Thanks
    Martin

    http://java.sun.com/products/archive/

  • [Answered] List of patches for Solaris 10 SPARC 64 bit!

    Hi All,
    Installation document for 10g Release 2 (10.2) for Solaris Operating System (SPARC 64-Bit) does not mention anything about patches required on Solaris 10 (there is a list for Solaris 8 and 9).
    http://download.oracle.com/docs/cd/B19306_01/install.102/b15690/pre_install.htm#sthref110
    Can I safely assume that the installation of Solaris 10 contains all the required patches in this case?
    Thanks,
    Edited by: Satish Kandi on Nov 19, 2008 10:21 AM

    Hi Satish,
    I did not have access to ORACLE metalink so could not able check the doc which you reffered. But Checked the ORACLE installation doc, I suppose that is the required patches for 8 and 9 which you have to make sure of on Solaris 10.
    Other wise wait and see for other inputs too.
    Hemanth might reply back some thing.
    - Pavan Kumar N

  • OSB 2.6  installer for solaris 10 (64 bit) - required

    Hi,
    I am are not able find the installer for OSB 2.6 for solaris 10(64 bit).
    Where can I find the same?
    Thanks in Advance.
    Rajani

    Don't know what a service id is, but you will need to be an oracle customer, which I assume you are if you are requesting old software.
    here is the link I use
    https://metalink2.oracle.com/metalink/plsql/f?p=130:14:5775706955868202591::::p14_database_id,p14_docid,p14_show_header,p14_show_help,p14_black_frame,p14_font:NOT,763603.1,1,1,1,helvetica
    cheers
    James

  • 64-bit WLS 11G for Solaris?

    I can not locate the 64-bit version of WLS 11G for Solaris. When I go to the download page all I see are 32-bit versions (at least they look like 32-bit version as denoted by the filenames such as wls1031_solaris32.bin).
    I have attempted to go through the e-delivery site but do not want to download a 21 part 11Gig file if it is not the correct one.
    I would appreciate any help at all.

    I am pretty confident that you need the 64 bit JVM for your platform, then you need to use the generic installer, this is based on how it has been done in prior releases.
    So you can find the available JVM's for your platform here:
    http://www.oracle.com/technology/software/products/ias/files/oracle%20fusion%20middleware%2011gr1%20(11%201%201%201%200)%20certification%20matrix.xls
    In this case that would be Sun JVM 1.6.0_11+
    OR
    JRockit 6 Update 5 R27.6.2+
    Then you should be able to run the generic installer here with that downloaded supported JDK:
    http://www.oracle.com/technology/software/products/ias/htdocs/wls_main.html
    I was not able to find anything specific on the documentation pages that described this process in detail, but you can always open a support case to get some assistance. I will check with the documentation team to see if that is going to be documented or already is.
    If you look at the 10gR3 releases, it shows how the generic installer is used, for example:
    http://e-docs.bea.com/platform/suppconfigs/configs/solaris/solaris10_103.html#104355

Maybe you are looking for

  • List items problems in oracle forms 6i

    Hello friends, I am using list item in oracle forms 6i and facing one problem. I am populating list using following built-in. Clear_list() Create_Group_From_Query( ) Populate_list() The problem I am facing is when list gets populate it keep the curso

  • Itunes messed up my restore and now doesn't see my ipod. What should I do?

    I performed a restore on my Ipod Touch (bought new a couple of years back) and itunes tells me there was an error and the restore could not be completed. Nice that it still manage to delete all my information, contacts and goodness knows what else (I

  • Performance of WITH query.

    Hi All, I have a WITH query (inline view) and when I run it against my pre-production database (millions of rows) it hangs and never comes back. However, when I run it on my development database (just a few rows), it comes back fairly quickly. So cle

  • What is the correct sequence preset to choose?

    Now a days I shoot AVCHD but I have video from years past that is from several different Video cameras, on my hard drive, just waiting until I get around to editing it. How do I determine which of those many presets that are available to choose from,

  • Old VAT number remains despite new account not needing VAT number.

    I have changed the credit card details for my account for Creative Cloud and paid for a new subscription. However, I was unable to change the VAT number from the previous account details. I am not registered for VAT and want to remove the VAT number.