64-bit Windows 7 on Boot Camp Problem

I recently got my new Macbook Pro, 15" with Intel i7 inside. I installed Windows 7 64-bit in it through Boot Camp right after I got it.
However, after installation, I found my Mac system takes far longer time to boot up than as before (Well, that "far longer" actually means around 20 seconds more than original). Some of my friends told me this could be handled if I totally remove the Windows partition and work on Mac only. However, I purchased lots of software in Windows, abandoning it would mean huge losses to me. Could anyone help me with this?
Besides, while running Windows 7, the OS seems to be quite unstable. First, the computer gets overheated easily; second, the system crashes quite frequently - not a blue screen, but instead, everything stops running and I could not even move my mouse, like what WinXP used to do. I actually just came back from Windows 7 from that problem -- I could only press and hold the power button to shut it down before I could do anything with my computer... So sad...
I'm running Boot Camp 3.1, so probably it's about updating the program.
Could anyone help me? I'd be so grateful for the help. Thank you

Thanks for your answering. I know Windows 7 could be stable, rock solid, for I've been using that OS on the laptop I once had before getting the new mac.
I'll try to search for some new updates for my hardware later and then try if things will be better.
Besides, I noticed that you're running Windows 7 and Mac OS X as well, do you also encounter problem of having the boot up time of Mac OS, too? I mean, it will stay longer at the point where the screen is white all over with the apple logo shown.
In addition, I also had some problems with switching between the two OS's. When I pressed the power button on the computer, I should also press and hold "option" until Boot Camp shows up the two OS's for me to select, right? However, this worked for me before, but recently, I found it really hard to do that: when I press and hold "option", the screen will keep white, and nothing will ever show up, unless I press the power button again to shut it down... Do you have any ideas about this kind of situation?

Similar Messages

Can i use 32 bit windows 7 for boot camp?

I recently purchased a 15 inch mbp retina display and wanted to use boot camp to install windows 7 on it. I accidentally purchased 32 bit instead of 64 bit. will this still work?

the apple drivers only comes in 64bit so it would be like running windows in safe mode in terms of drivers

Simple how-to guide to adding windows 7 64-bit to mavericks with boot camp

Simple how-to guide to adding windows 7 64-bit to mavericks with boot camp
*Please note I accept no responsibility for issues occurring from the use of this guide, please use at your risk
**Please note I do not propose or support using illegal copies of Windows software or licenses
Required technical skill: minimal
Required time: approx 1-2 hours
Required items: Mac, USB drive or DVD-R
Get a version of Windows 7 64-bit:
http://answers.microsoft.com/en-us/windows/forum/windows_7-windows_install/canno t-find-digital-river-download-site/66a8439b-0d16-4b70-92f7-1c8486a46ebf
Windows 7 Downloads are still available.
Download the appropriate Windows 7 .ISO file which includes Service Pack 1
(Note: must match what your product key version is for)
Windows 7 Home Premium 32Bit: http://msft.digitalrivercontent.net/win/X17-58996.iso
Windows 7 Home Premium 64Bit: http://msft.digitalrivercontent.net/win/X17-58997.iso
Windows 7 Professional 32Bit: http://msft.digitalrivercontent.net/win/X17-59183.iso
Windows 7 Professional 64Bit: http://msft.digitalrivercontent.net/win/X17-59186.iso
Windows 7 Ultimate 32Bit: http://msft.digitalrivercontent.net/win/X17-59463.iso
Windows 7 Ultimate 64Bit: http://msft.digitalrivercontent.net/win/X17-59465.iso
Burn this image file (.iso) to a USB drive or DVD-R:
USB drive:
Get a blank USB drive with 8 GB+ capacity
Format this drive to Fat32 (Windows and Mac shared format), this will erase the drive!:
Finder > Applications > Utitilies > Disk Utility > Partition > 1 > Fat32
Extract the image file to the drive exposing its files:
Finder > Applications > Utilites > Boot Camp Assistant
Click both "Create a Win 7 or later version install disk" and "Download the latest windows support software from Apple" and advance
Locate your image (iso) file, example: /Users/Christoper/Downloads/X17-58997.iso.download/X17-58997.iso
Destination disk is your USB flash drive that was formatted to fat32, if it does not appear it may be in the wrong format
Click continue, this process takes a long time (30 mins - 1.5 hour estimated), it may appear that it is freezing because progress bar stops at times, do not stop it, let it keep running. If you are unsure it is still going, open finder > click the drive > get info, and look at the size of the files. Then close finder wait a few seconds, get info again and see that file size is slightly larger. The final file size was 4+ GB for me
or DVD-R:
I have not used a DVD-R but this is how I expect it to work:
Insert black DVD-R
Finder > Applications > Utitilies > Disk Utility > Burn
Locate your image (iso) file, example: /Users/Christoper/Downloads/X17-58997.iso.download/X17-58997.iso
Partition HD for WIndows 7:
Finder > Applications > Utilites > Boot Camp Assistant
Choose the 3rd option Install Windows 7
It will ask you to select a size of your Harddrive space for Windows OS, this will eat up some of the free space on your Mac HD. How much space is enough for a Windows OS? Depends on how many programs you plan to install on it. If you are just using for surfing web and running MS Office, probably 30-40 GB is enough, and this is what I did. Remember this space will be used up from your existing HD and not usable when you are in Mac OS. This process takes about 10 mins I think
Install Win 7 OS:
With USB drive in port or DVD in drive, restart laptop.
It will bring up the Win 7 installer on boot up
Select the OS type that you have a registered key for
It will ask you to find a HD to use for Win 7 OS:
Select the HD you just created, if you try to continue it will complain that HD is wrong format (because MAC formatted it to a MAC compatible HD, we will fix this)
Select the HD, there is a button to the right for "advanced" I believe is the text of it. It will allow you to reformat the drive, choose NTFS which it requires. Then proceed
Proceed to setup Win with your preferences
Type product key from your OS purchase or an existing one that you are moving from another machine
Select Default Boot Drive:
By default it selects Windows as your default OS to boot at power up, most people want Mac OSX to be the default, so this can be changed:
Finder > System Preferences > Startup Disk > select Mac
Enjoy having Windows on your Mac!

Why use Boot Camp: Sometimes you need to run a windows only program. Boot Camp lets you do that with the speed and smoothness of a full windows OS.
How is it different from Mac Virtual Machine: A VM allows you to run another OS simultaneously while you are running OSX, while in a window similar to any other application. A VM is not as fast, smooth, and may have limited screensize/view.
Is it possible to have a VM and Boot Camp: Yes, and I do this because sometimes I want to use a VM quickly without shutting down, sometimes I want the advantages of Boot Camp
How do I get Windows in VM: how-to here:
https://discussions.apple.com/thread/6043251

Major Boot Camp problem! Stuck in Windows

Hi,
I installed Windows Vista Ultimate on a bootcamp partition, and now I am stuck in windows. The boot camp folder is missing from the program files folder, and consequently there is no bootcamp icon on my system tray to facilitate startup disk selection.
I am unable to select a disk if I hold down Option during the boot process - it still goes straight to windows. Same thing if I hold down Cmd-Opt-O-F to access the OSX Bios.
I am really at a loss here. Any help would be great.

Do you have the install disc for that Mac?
If so, insert Install Disc 1 and start the computer while holding down the C key. Choose a language, then from the Utilities menu, choose *Disk Utility*.
You should see your hard drive in the left-hand column (with the manufacturer name & capacity) and underneath that icon should be 2 partitions: "Macintosh HD" and "disk0s3" (or something similar).
Do you see both partitions?
~Lyssa

Error 0x80070017 when installing Windows 7 via Boot Camp...

I've been trying hard to research this issue and haven't come across anything that has worked for me.
At work, we have an iMac (Early-2009) that we wish to install Windows 7 on. Previous user has left, so I reinstalled Snow Leopard (10.6) and used Disk Utility from the disc to reformat complete to GUID single partition Mac OS Extended (Journaled), which is pretty standard for Macs. Mac OS X installed and booted just fine. I updated completely to 10.6.8 and all other updates. Only installed Microsoft Office 2011 and Firefox.
So Boot Camp begins...
Found that the early-2009 model doesn't "support" Windows 7 64-bit, so we are fine going with 32-bit. The 32-bit Windows 7 disc has been used to install Windows 7 using Boot Camp on 2 Mac Mini's (one Intel Core Duo, the other one Intel Core 2 Duo) just a few days ago.
Opened Boot Camp Assistant, partitioned the 1TB drive equally, inserted the Windows 7 disc, and clicked Restart.
It boots from the Windows 7 disc, I go through the options, choose the BOOTCAMP partition and format it (I assume Windows 7 is choosing NTFS for me). Click next.
It copies the files instantly, but then "begins" to Expand the files. It remains at 0% for 5-10 minutes (I can hear the Windows 7 DVD spin down and spin up, but mostly spin down). That's when the error hits:
"Windows cannot copy files required for installation. The files may be corrupt or missing. Make sure all files required for installation are available, and restart the installation. Error code: 0x80070017"
I click Ok and cancel the install. Restart and boot back into Mac OS X. And here I am.
Important Notes:
I've tried multiple times with a 64-bit disc as well. I will likely go check out another 32-bit disc from our software department, but I know this disc works on other Macs.
This issue occurred a month back as well when we attempted to install Windows 7 via Boot Camp (so before the hard drive and OS were reformatted and reinstalled). I was hoping reformatting and reinstalling the Mac OS X would solve the issue.
The Superdrive appears to be working just fine.
I read somewhere that I need to use repair disk to fix it. Does anyone know if I can repair disk a NTFS partition? Or am I suppose to repair disk the parent drive itself? The place I read it wasn't specific AT ALL and the forum was closed and I couldn't find a way to get a hold of the person. It just said "Repair disk did the trick". People, if you find a solution to your own problem, POST the solution!
Thanks in advance!

Yea, I saw that kb article. I verified we have the early 2009 iMac. It's an iMac 9,1 (3.06 24-inch, A1225).
As far as different hardware, I really don't think so, but I'll have to double check with my fellow employees. The specs all match up, but I'll see if anyone remembers having to replace hardware or send it into Apple.
I did think of trying an external DVD drive too, I'll see if I can scrounge one up. I'll post if it works or not.
The employee using the machine knows Windows, but is willing to learn the Mac OS X. Diversify your experiences I always say!
An added note to the Repair Disk "solution". Turns out you can't run Repair Disk on NTFS partitions or the parent hard drive that contains that partition, which makes since. I can only run Repair Disk on the HFS+ partition which did no good. (This is, of course, from booting up using a Mac OS X Install DVD).
Mac_Win, thanks for the suggestions!

Installing Windows 7 with boot camp as whole partition on 2nd internal hard drive

Hi all,
I am unsure what is the recent changes with Apple boot camp. But when I used boot camp utilitiy on my Mac Pro (Mid 2010) to install windows 7 64 bits. It would not install and created a whole lot of problems.
After I initialise the process to install windows 7 using boot camp utilities, I chose the option to create a single partition to installl windows 7 on my secondary internal hard drive (1TB). After I restarted my Mac Pro and started the Windows 7 installation process, I was unable to install Windows 7 on the BOOTCAMP partition created by the boot camp utilitiy. I got an error something about Windows cannot be installed on the selected forum because the driver contained GPT details.
I tried to format the BOOTCAMP partition, but it ended up with errors. I tried to delete and recreate the BOOTCAMP partition in Windows setup, but failed with errors again. As I could not go any further with the Windows 7 installation, I had to hard reset my Mac Pro and tried to reboot back into Mac OS X Lion and that's when the nightmare begin.
Not only I could not boot into OS X, I could not use any of the startup key combinations (i.e. Hold option key to select start up disk, option + R to boot the lion recovery drive, not boot from any external firewire drive installed with OS X Lion). Basically none of the key combinations worked except for the holdingi F12 and mouse key to eject CD.
The only thing I could boot the Mac Pro with is the windows installation CD and Linux Ubuntu Raring Distro. I can install the ubuntu distro without any issue. However, I could not boot my mac pro back into OS X as Linux does not support bootcamp. The only way I could use Mac OS X Lion again is to delete the partition OS X Lion was installed on, and then I was be able to install Windows 7 without any issue.
After installing windows 7 I would have to download boot camp and then use the boot camp control panel to restart in the Mac Pro installation DVD and I will have to reinstall OS X again. After installing OS X, I went to System Preference and tried to select Windows 7 as startup disc. But I failed to as it says "Windows 7" Was installed via another utility. I would have to erase the partition and reinstall Windows 7 again using bootcamp utility. If I try to install windows 7 again, the horror I described above repeats again.
From my understanding, the Boot camp utility creates a new EFI bootrom with Master Boot Record (MBR) in FAT32 format. Therefore I could not boot back into Mac OS X without using boot camp in windows 7 as none of the boot combinations key worked.
I want to ask if anyone is experiencing the same issue as i do, and if there are any solutions to the problem I am experiencing. I never had such issue before. I was able to install Windows 7 on my 2ndary internal hard drive without issue using boot camp. I don't what has changed. I have googled for solution, I only found something related to XOM but nothing else.
If anyone can provide me with any help in regards to installing Windows 7 as a whole partition on a secondary internal hard drive. It'd be grealy appreciated. Thank you in advance.

If you have driver issue, just pre-download the boot camp drivers and save them on an external drive or burn them onto a cd, you will be able to load drivers via the advanced installation option during windows setup, that is if your osx partition isn't actively preventing you from installing win7 on the BOOTCAMP Partition created by boot camp assistant, I find this rather ironic, took me 3 days to figure out this issue, I was stuck without being able to boot into anything beside the windows cd, which wasn't even helpful as I could not install windows as I did not want to delete my osx partition. I lost all my data becsuse of it, as I had no idea what was going on. I tried to recover the partition using testdisk, hfsprogs and gparted in ubuntu life cd but they dont support HFS+. As I could not access osx terminal (couldn't even boot into osx installation dvd with that dreaded MBR created by boot csmp). I could not use pdisk in terminal to restore the osx partition map. Though luck for me. Called applecare and they had no idea what the problem was, and as usual they orgsnised for hard drive replacement. But it was clearly a software issue.
They will have to fix bay2 for me as I can no longer detect any hard disk connected to that bay.

Boot Camp problem.

I need boot camp and i have a 3tb fusion drive hdd on my new imac.
I need windows both on vmware fusion (and everything is ok with it, it works perfectly) to execute fast simple applications not availabale on mac os And on boot camp to execute 'heavier' programs.
Following the http://www.twocanoes.com/support/winclone/installing-windows-via-boot-camp-on-a- large-(2.2-tb-or-larger-)-drive-in-lion-(10.7)-and-later
instructions i got stuck here http://d.pr/i/oYZP,
i cannot add a third partition, everything is grey.
The twocanoes guide theory is clear but i need a step-by-step instructions with utility disk:
here http://d.pr/i/pSSw i understand i've got to partition the hdd in 3 slices, but i can add just one as you can see here http://d.pr/i/4dRN . I can't do nothing, just add one partition and change size with the arrows (i can't write the numbers by myself but this is not a problem, i simply don't understand why).
I tried to create a partition, one is macintosh with mac file system, 2tb size. The other one called windows with fat file system and took the remaining size available.
After 8 hours it finished and i found this http://d.pr/i/oYZP.
I don't understand why the win size is 2tb and not 1 and mac one is so small and not 2tb.
I'm a bit upset because working with mac+windows is crucial for my work and i'm wasting a lot of time.

Welcome to the Apple Support Communities
Caution! You are trying to follow the steps to install Windows on a 3 TB hard drive, but you have a 3 TB Fusion Drive, so you can't follow those steps.
Instead, see > http://www.twocanoes.com/support/winclone/installing-windows-on-a-boot-camp-part ition-on-a-3-tb-fusion-drive
That's very dangerous, so make a backup of your files before doing anything. If you want to be sure or you don't want to follow those steps, I highly recommend you to wait until Apple launches a OS X update that makes Boot Camp compatible with a 3 TB Fusion Drive, or download Parallels, VMware Fusion or VirtualBox, and install Windows on a virtual machine

2010 Mac Pro Boot Camp - Refuses to boot Windows after installing Boot Camp drivers

Hey all,
I have a quad 3.2Ghz 2010 Mac Pro with a Radeon 5870 and 8 GB RAM.
I have 2 10000RPM WD Raptor drives, the first drive is my Lion boot drive. The 4th bay contains the second Raptor which has Windows 7 Ultimate 64 bit installed. Bay 2 has Time Machine, bay 3 has a Windows backup drive.
I had first installed Windows and the Boot Camp drivers a few months ago and everything was humming along smoothly. Monday I tried to boot into Windows and it crashed immediately after the black Booting Windows screen started to change to the login window. This happened repeatedly. Nothing changed on the system that I am aware of. Whenever I tried to boot windows again, it booted into the repair mode. That did not seem to work because after running the repair it would still not boot.
So I did what is usually required of Windows, and that was to reinstall. I reformatted the hard drive, ran Boot Camp assistant, and started the install.
Everything was peachy so far, so I tried to reinstall the Boot Camp drivers (4.0). Did a reboot. Same problem. Doh!
So I did ANOTHER reinstall, and everything was fine. But this time I tried to install the Boot Camp drivers off the os install disc that came with my Mac (3.1). Still no go!
So finally I did my third reinstall and after that I did not install Boot Camp drivers. However, I did load up the CD and individually installed drivers for the Apple Mouse, Apple Keyboard, Cinema Display, etc. No problems whatsoever. Everything is actually still humming along fine.
So it looks like running the full Boot Camp install for some reason no longer works. Which means I am missing the Apple Boot Camp control panel, but that's not really a big deal. Althought it's quite annoying to not have the functionality of the special Mac keyboard keys like volume control, etc.
Has anyone run into this? I thought it might be a hardware problem but my Mac OS X OS exhibits no problems whatsoever.
Thanks!

Thank you to The hatter.
I have a Mac Pro mid 2010 with a SSD and several internal hard disks. For some time I was trying to install Windows 7 on a fresh boot camp volume on a new WD 7200rpm 1TB hard disk. It was taking hours to install, and then I had a series of failures to reboot that proved permanent. The Window Repair utility would come up and took forever to repair the volume - but failed to actually do so, requiring completion reinstallation of the bootcamp volume. This occurred three times, between 1 day and 2 months after installation. I had already moved the Windows drive in to drive slot 1 of the Mac Pro.
Eventually I gave up and installed boot camp on a secondary partition of the SSD. This worked fine, however is limited in capacity. So yesterday I thought I would try to install Windows on the hard disk again. The Windows installer took many hours to do its thing, and eventually a message came up that the installation had failed.
I took your tip about possible hard disk failure, and ran Techtool Pro surface scan. It turns out that there are lots of bad blocks being reported. According to Micromat's documentation, the bad blocks being reported are those that may be in critical areas of the disk that cannot be mapped out. They recommend low level reinitialisation (with zeros) to map out the bad blocks, if possible. I am now running Apple's Disk Utility to do this, and fingers crossed that this reinitialisation succeeds, or I will have to replace the drive.

Windows not finding Boot Camp on MacBook Pro

Hey everyone. I have Windows 7 64-bit and a MacBook Pro (mid 2010) with OS X Lion installed. When I boot up in Windows, it seems that only half of the time Windows realizes that it is on a Mac. Meaning...only half of the time the Boot Camp program is running in the notification tray, and only half of the time will Windows register the volume up/down, brightness up/down, and keyboard backlight up/down buttons on the Mac. It makes it very difficult to say...adjust the brightness or volume in the middle of a game. I can still go out of the game and turn up the volume in the notification area, but it is becoming a huge hassle. Like I said, this is only happening about half of the time. The other half of the time Windows registers that Boot Camp is on it, there is the Boot Camp icon in the bottom right corner of Windows, and all of my control buttons (brightness, volume, etc.) work just fine. Any ideas on how to make this happen every time? Thanks.

Hello Bhagyeshree
Check out the articles below to troubleshoot issues with connecting to Wi-Fi. Start with creating a new Network Location and then search for a Wi-Fi network and if that does not work, then go through second article to troubleshoot the issue further.
OS X Mavericks: Add a network location
http://support.apple.com/kb/PH13788
Wi-Fi: How to troubleshoot Wi-Fi connectivity
http://support.apple.com/kb/HT4628
Regards,
-Norm G.

Can I use my old Macbook Pro as an external disc drive while installing Windows 7 through boot camp?

I want to install the Windows 7 CD on the newest version of the 2013 Macbook pro 10.9.2 running OSX Mavericks, through Boot Camp. It does not have a disc port, nor do I have an external disc drive....but I do have an older macbook that does have a disc drive and I know you can supplement it for an external disc drive.
My question is can I use my old Macbook pro's as an external disc drive for the installation of Windows 7 in Boot camp? Will this be a problem? Or do I have to buy an external disc drive separately.

http://support.apple.com/kb/HT5287

Installing Windows 7 With Boot Camp on Mac Pro 3.1 w/GTX285 Video card

I have an Early 2008 Mac Pro 3.1 running the latest version of OS 10.6 with all updates. I have an nVidia GTX285 card installed in the Mac Pro that has been working fine for at least six months under OS 10.6 with Mac drivers downloaded from the nVidia web site and installed under OS 10.6. I replaced the ATi 2600XT video card with the nVidia GTX285 in order to have CUDA support in Premier Pro CS 5 and it works beautifully.
I now wish to install Windows 7 Professional 64 bit on this Mac Pro. I have never had any version of Windows installed on this Mac Pro. I am using Boot Camp assistant and a new full version of Windows 7 Professional 64-bit.
My question is do I need to remove the GTX 285 graphics card and replace it with my AT 2600XT before installing Windows 7? This would be a real pain to do because the two connectors to the motherboard are hard to get to. However, since Apple never used the GTX285 in any of its computers, I am worried that I will not have any video display when I go to try and install Windows 7 with Boot Cam assistant.
Please advise me whether removing the graphics card is necessary before installing Windows 7 with Boot Camp.
Thank you in advance for responding.
Tom

NO.... he has a workstation, and not MBP, nor are "drivers already loaded."
How I would proceed -
Install Windows on its own drive.
Pull all the other drives.
Boot from Windows 7 Pro DVD
Forget Boot Camp Assistant, it doesn't do anything - unless you really want to install Windows on the SAME drive as Mac OS - not ideal and not what most of Mac Pro owners do.
Just insert your OS X DVD once Windows is up to date - helps to buy the SP1 OEM version $129.
Run Apple SETUP.exe (Boot Camp 3.0.x drivers) and update with ASU or manually to 3.2.
No you don't need to go back and use that ATI. And you dont' want to be in the situation of changing from ATI to Nvidia and all the hassle that adds. you are fine.
The Mac Pro is as close as anything to a standard Wintel workstation.
Add MS Security Essentials or KIS or whatever you favor. KIS2011 or NIS2011 are good, MSSE 2.0 is free and based on their enterprise product.
AV-Test.org Test Security-Software

Unable to install Windows 8 in Boot Camp because of MBR

I just this weekend reformatted my MacBook Pro (Mid 2010, 15", 2.4 gHz i5) and so I had to reinstall Windows 8 with Boot Camp. I had it working fine before, although the lack of drivers made it absolutely terrible (Has Apple released any drivers for it yet?) but the installation went without a hitch. When I tried to install Windows 8 this time though, it did not work at all. On the OS X side, everything went as expected, and when I went to Windows installation everything worked until I had to select a partition. I feel like at this point I should point out that I have removed the optical drive from my Mac and have the Optibay in my optical drive bay and have a 128 GB SSD as my main drive and a 512 GB SSD in the optical drive slot, which was where my Bootcamp partition was, around 250 GB. I was installing Windows 8 using an external enclosure for my Superdrive with the Retail Windows 8 DVD full version. Anyways, when I went to select the partition, it said that it was unable to install because
"Windows cannot be installed to this disk. This computer's hardware may not support booting to this disk. Ensure that the disk's controller is enabled in the computer's BIOS menu."
"Windows cannot be installed to this disk. The selected disk has an MBR partition table. On EFI systems, Windows can only be installed GPT disks."
I have heard many conflicting resolutions to the problem, I have heard that I need to remove the other drive and install the optical drive and I have heard that this works very well, and many other things, I just want to find the correct solution to this. Thank you! And I hope I provided you with enough information!

I have a cd drive with a bootable windows 7 disc and I already downloaded the drivers needed to a pendrive on MS-DOS Format.
However this devil things asks me for a windows 8 disc.
Many many thanks if someone knows how to do it.

A Few Questions Before Installing Windows 7 in Boot Camp...

1. New Mac Pro compatible with both 32 and 64 bit Windows 7?
2. What is the minimum safe amount of space needed on the boot camp drive partition to Windows 7 to operate with no issues?
3. If one no longer needs the boot camp partition nor windows can one reset things back to factory specs with only the Mac OS on the drive and recover the full drive space like new?
4. Any good video tutorials out their on installing Windows 7 with boot camp?
5. This is a big concern for me, lots of complaints the the nVidia drivers in windows are not up to date and this has caused a blank screen to come up. Has this video driver issue been resolved?

you say Mac Pro, well that means you can put Windows on its own drive, and that you will need to use ATI drivers directly.
not knowing what your needs are maybe a VM is enough.
too general to say how large and that can be based in part on amount of RAM installed, programs, data. And with 1TB costing $90 does 25GB vs 50GB vs something else? I mean $10 for 100GB is getting cheap.
If you intend to buy a Mac Pro then obviously you want 64-bit, and if it is single cpu you don't need Windows 7 Pro.

I can't boot from the windows cd with boot camp

I got Vista up and running via boot camp but now I have a problem that could cause some issues. How the **** do you boot from a windows cd with boot camp!?!? When I stick in the windows based CD (could be the vista install CD -after vista's been installed of course- or a Windows home server restore cd) and hold down the option key I chose to boot from the CD in the menu then the screen goes black as it should and then it says press any key to boot from cd or dvd..... It gives me 5 seconds to press a key and then it conintues to boot into Vista. The thing is when it asks me to press any key I press any and all keys on the keyboard and I get no response and it just boots into vista. This can be quite a problem, what if I need to restore vista via the install CD? I can't chose to boot from it cause everytime it asks me to none of my key presses register. So everytime I have a problem I won't be able to restore or even diagnose it, I'll just have to reinstall vista? I don't think I can even bring up the safe mode or anything like this. The keyboard won't work until I reach the password screen of Vista. I've also tried plugging in a USB keyboard to it and it still doesn't work. So basically I need to know how to make the keyboard work before Vista loads.

Ok, well I just tried booting from the windows cd and it seems that I lied to ya It seems that you can boot from it. Although I only took it to the point I was comfortable with. The boot resulted in it asking me to install windows and I didn't see any partitions listed or anything, so I chickened out (so to speak) not wanting to take the chance of my Leopard installation getting screwed up.
It's been a quite some time since I used the Vista boot disc and can't really remember how it went when I used it in conjunction with boot camp beta. Sorry can't give you anymore information.

I removed my Windows 7 in boot camp...then i restart the imac the mac HD is gone only recovery hd left...what do I need to do to recover the mac hd?

I removed my Windows 7 in boot camp...then i restart the imac the mac HD is gone only recovery hd left...what do I need to do to recover the mac hd?

Hi I just got out of this situation after two weeks of forums and have tried any kind of different solutions.
If you have no response using start-up keys and you can't choose your start-up disk when pressing "Option" here is what to do.
The problem in this situation is common to users that install Boot Camp and at one stage the installation fail, may be a bug in BootCamp or just our mistakes, it doesn't really matter here is the solution.....
If you can start Windows, or Start the installation dvd of Windows do it, when In windows you will need to install BootCamp windows Driver, if you try to use the Apple downloaded file, it will not work.
You need to find the zip file in internet I found it with Google.
When you have the file run a "cmd" window with Administrator privileges.
Navigate in the folder that you have decompressed and open the folder Drivers/Apple/ you will see the file BootCamp.msi or BootCamp64.msi, of course choose the one that correspond to your Windows System .... type the file name and hit enter .... the drivers will install .... but what we really want to be install is that little icon on the system tray (right bottom).
After we will restart windows that little icon will give you the chance to restart the computer in OS X.
If something during the BootCamp and Windows installation had corrupted your OS X installation, you will have to reinstall, but at least you will be able to do it now. ;-) It took me two weeks and lot of researches, it's an hour job. Have fun.

64-bit Windows 7 on Boot Camp Problem

Similar Messages

Maybe you are looking for