64 Bits and Motif

I compile a Motif application in 64 bit as follows:
CC -xtarget=generic64 -g -c fonttest.C
CC -xtarget=generic64 -g -o fonttest fonttest.o -lstdc++ -lm -lXm -lXt -lX11
it compiles just fine. But when I run it I get the following errors at runtime:
Warning: Cannot convert string "-dt-interfacesystem-medium-r-normal-m*-*-*-*-*-*-*-*-*" to type FontSet
Warning: Unable to load any usable fontset
Warning:
Name: FONTLIST_DEFAULT_TAG_STRING
Class: XmRendition
Conversion failed. Cannot load font.
this error repeats several times. I load a font manually for the
drawing area and it works fine, but the (default) fontset stuff fails.
Anyone have any ideas?
Thanx,
scott

When you load a font by hand, do you load this font,
or some other? The message means that your app can't
find the font requested. Find some font you know that
you have and use it. You may be setting a default
font in one of your dot files.

Similar Messages

Logic 8 and Motif XS - new to it

So I have made a few beats on my motif xs, and now I want to edit them in Logic 8 which I just recently got. I have messed around a bit and searched around online but can't really get anywhere.
This is what I'm trying to do:
-Take my song, from pattern mode, and have it sync to logic via usb to my mac. It seems the midi ports are recognized, but each track has weird symbols instead of the actual names of the instruments on the motif.
Basically, you know how you can edit on the song on the motif (kind of tedious wiht small screen to cut and paste/move/copy, etc...) - I want all that sound info (waves, each tracks- entire song) to appear in logic so that I can edit the song on the computer. Is this possible?
I have never used logic before, and am fairly new to creating songs on motif- but, I changed the setting utility>remote>DAW type> Logic, and it still isn't helping me.
I am obviously missing something. Because I am new at the motif, editing on pattern mode seems hard and not that efficient. For this reason, I want to pull up my song on Logic, as it is on the Motif, but when its on my computer it will be easier to move stuff around/cop/cut/paste/add effects, etc...
Anyone know of any resources that may help me or have any advice?
Thanks...

ok, so I have logic setup just as you said, and my motif to send MTC out, and with all external midi tracks enabled to record, I push play on my motif.... what happens is I get my track playing on the motif (with all my instruments changed, I guess it is somehow playing instruments form Logic, which doesnt make sense because nothing is synced, and I don't have Logic set to MIDI out its patches) and thats just on the earphones ho0oked up to my keyboard.. on logic, I get no sign of anything recording, and if you turn up the volume it just sounds like whale noises (seriously)
Here is something to note though.. when I quit logic, and turn off my keyboard, I reboot both of the them, and then as soon as logic opens (with usb to motif) in the main arrange screen under "global tracks", there are 2 tracks there.. 1 says "øˇ€∞$ÑB" (which is the jibberish it is reading from motif) and the other is "audio 1" (from garage band?) this is before I setup all the other stuff (external midi tracks and settings in logic)
I really don't understand... From your help Donald, it looks like I should be able to create 7 external midi tracks in logic, have them record enabled, and then push play and motif, and then each of my tracks would just start recording in realtime on my computer? this would be great, but it is not what is happening...
On the left side, I can choose which port to take from the motif (1 thru 4) and I have 1 selected... and also channel 1
I'm still messing around with it and trying different settings... but if anyone has a clue as to what I may be doing wrong, please help....
thanks

Creation of Add-on package for 64 bit and 32 bit SAP Business One Client

Please help me creating package for 64 bit and 32 bit SAP Business One. If Add-on executable is compiled with x86 option then there is no issue of connecting Add-on with 32 bit SAP Business one and if Add-on executable is compiled with Any CPU option then there is no issue of connecting Add-on with 64 bit SAP Business one. Problems are mentioned as below
1. My Add-on uses MS ACCESS connection and the connection is read using Jet OLEDB 4.0 provider. It works fine for x86 compile mode but not when compile mode is Any CPU. I searched for the issue on Google and found a solution to change MS ACCESS connection provider to ACE.OLEDB.12.0 but again ACE provider is installed according to the Office version i.e. 32 bit or 64 bit office suite. If I install 32 bit ACE provider then Add-on executable compiled with x86 version is working fine but with Any CPU option throws error as provider is not registered on current machine.
2. Secodly, our license validation activex dll is build using vb 6.0 and therefore when Add-on executable is compiled using Any CPU option, Add-on EXE cannot read from license dll. Any suggestion, how the activeX dll can be compiled whose component can be created from for X86 compiled exe and any cpu compiled exe.
Please help because we are stuck in this issue and cannot move forward.
Thanks.

Hi Alejandro,
That is one solution but did your add on used ms access connection? if you used Jet oledb to connection string or ace oledb connection string? what if 32 bit office is installed and what if 64 office is installed? how did you found the office version in install script? after determining the office version how did you installed Microsoft redistributable for ace oledb (32 bit or 64 bi )?
I am sorry that I asked many questions but these are the problems where I am stuck with the addon installer?
Thanks

Install sqldeveloper on windows 7 64 Bit and Oracle 11.2

Hi,
how can I find the rigth jdk. I installed JDK on C:\Program Files\Java\jdk1.6.0_23.
I installed Oracle 11.2 including sqldeveloper. But I cannot find the correct folder to start sqldeveloper.
Where can I find this path?
When I include a path with java.exe I get the error "Unable to find a Java Virtual Machine. To point to a locacion of a Java Virtual Machine, pleaser refer to the Oracle9i Jdeveloper Install guide (jdev\install.html)" Where can I find this?
Thank you for your help
Siegwin

I am on Windows 7 64 bit. I see that installing Oracle 11.2 database installs SQL Developer also but that doesn't work. I get the .bat file not found crap. What I then did was do a seperate install of SQL Developer for 64 bit, but that does NOT install the jdk.
I then did the java install from:
http://www.oracle.com/technetwork/java/javase/downloads/jdk-6u25-download-346242.html
I selected: jdk-6u25-windows-x64.exe
I then point to the java.exe where this install loaded it (c:\program files\Java\jdk1.6.0_25\bin when I start up sql developer and it still gives the same error. I delete the SetJavaHome value in the sqldeveloper.conf file and try again over and over but it still gives the same error.
So, I have windows 7 - 64 bit operating system. I have Oracle 11.2 database installed. I have a seperate installation of SQL Developer 64 bit and I have the java jdk for 64 bit installed.
Nothing is working. Can anyone please steer me in the correct direction? Should I delete the second install of SQL Developer 64 bit and to an install of SQL Developer 32 bit?
Please help

CC, CC 64 Bit, and CC 2014? WTF?

It's bad enough Adobe can't figure out how to make the same features in one program work the same in a different program. To top it off, instead of improving what are now "apps" and integrating we now have more new programs to do the same thing (e.g. not just one for website creation, not just one for photos, not just one for illustrations, not just one for animation, etc...) and to top it off again they get rid of important programs like Soundbooth, and stop upgrading ones we need like Encore. I am beginning to think the CC is for Creative Chaos not Creative Cloud....
So, I uninstalled my CS5 master suite finally and moved presumably up to CC. But, now do I not only have more than one program to do the same thing more now I also have 3 of each! Wow! That's STUPID. Sorry, I hate using that word, but what in the hell?
Why is it when I go to my programs I have a CC version, a CC 64 bit, and now new to the Creative Chaos we have CC 2014 versions!!!! What? Really? Someone, please help me maintain my sanity. Before I realized it I was using Premiere CC then I inadvertantly started using CC 2014. Then I was like "something is missing, oh, wait, what? there's more than one version of premiere in CC???" Then I realized "oh, there's 3 of Illustrator, Photoshop, and inDesign?
I of course have a 64 bit system, so should I only use the 64 bit versions and just delete the shortcuts to the others? and when there isn't a 64bit version but instead just a CC and a CC2014 version, which do I use? I mean, I assume the CC 2014. But, in 2014 will something change, will I be like "damn it, I should have been using the CC not the CC2014"?
Adobe, please clean up all your software, boil it down to just the ones we need, we don't need more than one program to do THE SAME THING. and once you boil it down, don't give us three versions of it, ask "do you want the 64 bit version or the 32" and we'll be happy to download precisely what we need. Or better yet, figure out a way to make it work with one program. And, of course while you're at it combine the CC and CC XXXX version of each, WTF???

32bit programs are installed for those people who use plugins that have not been updated to 64bit
CC and CC2014 have different source code bases, so they are different programs
http://blogs.adobe.com/jkost/2014/06/installing-the-2014-release-of-creative-cloud.html
This messages says (at least some) CC 2014 programs use NEW plugins https://forums.adobe.com/thread/1499663
-so do not uninstall the older CC programs if you use plugins in your programs until you are sure you have plugins that work in CC2014
If you are sure you don't need the old CC programs
-http://helpx.adobe.com/creative-cloud/help/install-apps.html to install or uninstall
-read reply #3 about the ORDER of uninstalling & installing https://forums.adobe.com/thread/1242671

What is difference between 32 bit and 64 bit sql server memory management

What is difference between 32 bit and 64 bit sql server memory management
Thanks
Shashikala

This is the basic difference...check if helps:
A 32-bit CPU running 32-bit software (also known as the x86 platform) is so named because it is based on an architecture that can manipulate values that are up to 32 bits in length. This means that a 32-bit memory pointer can store a value between 0 and
4,294,967,295 to reference a memory address. This equates to a maximum addressable space of 4GB on 32-bit platforms
On the other hand 64-bit limit of 18,446,744,073,709,551,616, this number is so large that in memory/storage terminology it equates to 16 exabytes. You don’t come across that term very often, so to help understand the scale, here is the value converted to
more commonly used measurements: 16 exabytes = 16,777,216 petabytes (16 million PB)➤ 17,179,869,184 terabytes (17 billion TB)➤ 17,592,186,044,416 gigabytes (17 trillion GB)➤
As you can see, it is signiﬁcantly larger than the 4GB virtual address space usable in 32-bit systems; it’s so large in fact that any hardware capable of using it all is sadly restricted to the realm of science ﬁction. Because of this, processor manufacturers
decided to only implement a 44-bit address bus, which provides a virtual address space on 64-bit systems of 16TB. This was regarded as being more than enough address space for the foreseeable future and logically it’s split into an 8TB range for user mode
and 8TB for kernel mode. Each 64-bit process running on an x64 platform will be able to address up to 8TB of VAS.
Please click the Mark as answer button and vote as helpful if this reply solves your problem

Windows XP Pro (32-bit) and Vista Ultimate (64-bit) on the same Mac Pro HD?

Has anyone been able to install both Windows XP Pro (32-bit) and Windows Vista Ultimate (64-bit) on the same dedicated Windows hard drive? I have four HD in my Mac Pro, and one of them is dedicated for Windows (and bootable via Boot Camp). I found the following technical articles about installing Windows XP & Vista on the same hard drive (using two separate partitions) using a VMWare machine as the test system:
http://apcmag.com/howto_dual_boot_vista_and_xp_with_vista_installed_first__the_stepbystepguide.htm
http://apcmag.com/howto_dualboot_vista_with_xp__stepbystep_guide_withscreenshots.htm
Has anyone successfully installed Windows XP (32-bit) and Vista 64-bit) on the same NTFS partition?
I already have Windows XP Pro (32-bit) SP3 installed on my single NTFS hard drive. I am looking for the best way to add the Vista 64-bit installation on the same hard drive.
Any thoughts and advise are appreciated.

Windows has its own list of boot OSs, and default, from msconfig. It will sit and wait for xx-seconds on startup in Windows if you want to boot from an alternate.
As to whether Apple's OS Switcher (aka startup disk bootcamp control panel or tray icon) sees both, I had Windows Home Premium and Ultimate 64, and pretty sure OS X saw both. That was pre-Leopard and before there were 64-bit Apple drivers.
I can't think of any scenerio of wanting to mix 32-bit and 64-bit on the same paritition, you realize you can't install the one over the other and must do a clean install.
When I added a partition out of main partition (I wanted to put search index and page file on their own partition) those partitions aren't seen - are hidden - to Leopard.

Install demo of CS4 Web Premium-Photoshop Installs 64 bit and x86 versions but 64 bit does not work

Just installed the CS4 Web Premium demo onto a brand new 64 bit i7 processor with Windows Seven Home Premium machine with 9gb memory. The install seems to be fine except it installed a 64 bit version as well as x86 version into different folders. The x86 version works fine but the 64 bit version does not.
Every time I try to open a file using "Open With' I get the following message "The application was unable to start correctly (0xc000007b). Click OK to close the application."
First of all why does it install both versions and why does it try to open everything in the 64bit version even after specifically telling it to open in the x86 version (even after setting the default file association to the x86 version.
I would of course like to use the 64 bit veriosn but if it not going to work. I'll use the 32 bit version. I just wantto be able to right click my mouse and be able to "Open With". I can open Photoshop 32 bit and open the file that way but it is a pain to do that way.
Any help would be appreciated

Both are installed to allow you to use 32 bit plugins. As for the problem, you'll get far more attention in the Photoshop forum.
Bob

I have a Windows 2003 Server 64-Bit, and when I upgraded to Firefox 4.0.1 now it won't run, it keeps saying to restart to complete the installation, but I've restarted theserver 4 times, and I still can't use it.

I have a Windows 2003 Server 64-Bit, and when I upgraded to Firefox 4.0.1 now it won't run, it keeps saying to restart the computer to complete the installation, but I've restarted theserver 4 times, and I still can't use it.

I ended up putting it in DFU mode. It's kinda hard to tell it was in DFU mode because nothing showed on the screen, it was just black, but the sounds from the computer helped to tell me it was connected.
Itunes still didn't recognize the device for whatever reason.
So I used redsn0w. I don't know if I can say that on these forums, but considering itunes was worthless at this point I am going to give credit where credit is due.
Now I am giving itunes a second chance to upgrade to 5.1, if it doesn't work, well, back to redsnow and maybe I will even jailbreak it this time rather than just using the fecovery fix found under extras.

Trying to install iTunes 12.1 for Windows 8.1 (64-bit) and get Itunes error HRESULT: 0x800736B3

Hello,
I am Trying to install iTunes 12.1 for Windows 8.1 (64-bit) and I get an Itunes window with an error that says:
An error occurred during the installation of assembly 'Microsoft.VC80.CRT,type="win32",version'8.0.50727.6195",publicKeyToken="1fc8b3 b9a1e18e3b"processorArchitecture="amd64". Please refer to help and Support for more information.HRESULT: 0x800736B3
I already:
- Uninstalled all old Itunes versions.
- Tried a clean reboot to install the new version,
- Installed the security update’ Microsoft Visual C++ 2005 Service Pack 1 Redistributable Package ATL Security Update’
But I still get the same error.
Can someone help?
Thanks!

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
If you still have trouble you might consider installing the alternate version iTunes 12.1 for Windows (64-bit — for older video cards) where you can download a 64-bit installer for the 32-bit version of iTunes that works with older video cards. This version may also be useful for anyone who is unable to get the 64-bit version of Apple Application Support to install when using the itunes6464setup file, or has trouble with playback of certain video files despite having QuickTime installed.
tt2

Is HP Smart Web Printing compatible with Windows 7 Ultimate 32 bit and Internet Explorer 8 and 9?

Is HP Smart Web Printing compatible with Windows 7 Ultimate 32 bit and Internet Explorer 8 and 9?

HP Smart Web Printing has been replaced with HP Smart Printing. It does support Windows 7 and IE 6 to IE9. See this page for information.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

I have two pc, one with windows 7 professional and another with windows 8.1. I'm the only owner and user of both. One works with 32 bits and the other (windows 8.1) , 64 bits. Can I use acrobat standard XI in both pc's being the only usuary?

Just in case. I have two pc's one with windows 7 professional (32 bits) and another with windows 8.1 (64 bits). Can I use, with one license, as I'm the owner and only user, acrobat standard XI?. Thank you in advance
Francisco

Yes, the license allows 2 installs for the owner's personal use. You can check this in the license agreement if you wish.

TS4123 This is not correct solution. I have fresh copy of Windows 7 64 bit and I have the same problem. Autorun only shows the Bonjour service. It started when try to sync more than one iphone.

This is not correct solution. I have fresh/new copy of Windows 7 64 bit and I have the same problem.
Autorun only shows the Apple Bonjour service. It started when try to sync more than one iphone over WiFi. I have two iphones and an iPad. I turned off syncing over WiFi and still has high CPU utilization. One of the CPU's is pegged at 100%. It is the AppleMobileDeviceService.exe process.

For the record, I then followed the suggestion of MarcDCMB in https://discussions.apple.com/thread/4291206 of just manually restarting the Apple Mobile Device service in Windows services.msc once each time after starting iTunes and the service no longer hogs CPU after that service restart. Not too painful as a work-around, and apparently an effective one, but clearly not a solution to the problem. Again, as above, all the other solutions didn't work for me and I have no conflicting software as far as I can tell. So you'd have to say this Apple's problem.
Also FTR, I am still on the 5.2.0.6 version of the Apple Mobile Device Support MSI and I don't know if that is relevant to this work-around working but my sense is that it is NOT relevant. I'll report back on this thread if I re-upgrade and the problem returns in spite of the service-restart approach.

TS3771 I have a podcast that will not play in 64 bit iTunes. I checked the box to open in 32 bit but now I get an error stating that iTunes needs 64 bit and quits the application. How can I get iTunes 11.1.4 to open in 32 bit so i can view this podcast in

I have checked the 32 bit box in my iTunes (Finder, iTunes.app, Get Info) so I can view a video podcast but now iTunes will not open. I get an error stating that it needs to be 64 bit and the application quits. How can I get my iTunes 11.1.4 to run in 32 bit mode so I can watch my podcasts?

I have checked the 32 bit box in my iTunes (Finder, iTunes.app, Get Info) so I can view a video podcast but now iTunes will not open. I get an error stating that it needs to be 64 bit and the application quits. How can I get my iTunes 11.1.4 to run in 32 bit mode so I can watch my podcasts?

Vista 64-bit and Treo 600 Hotsync solution that works!

I too searched many, many forums and sites for a solution to this problem. And I have found it.
I have an HP dv9260 laptop with Windows Vista Ultimate 64-bit and Office Pro 2007, which I bought in June this year. And I have been unable to sync my Treo 600 to it - until now. (I had even resorted to syncing to my older Toshiba Tablet PC (WinXP Pro, Office Pro 2003) via standard USB sync cable, connecting the Tablet to the new HP with a Belkin Easy Transfer cable, exporting my updated Contacts, Calendar, and InfoSafe records to .vcf, .ics, and .txt files, then transferring between the HP and Tablet, and then importing them into the appropriate app - Whew! man what a pain.
Now I have found a far more elegant and simple method. I found an Infrared USB 2.0 adaptor (dongle) at the Chunwai_1996 store on eBay (http://cgi.ebay.com/NEW-USB-2-0-IRDA-ADAPER-4Mbps-SUPPORT-VISTA_W0QQitemZ110164766509QQcmdZViewItem) for $8.33 USD + $5.67 USD S&H (total $14.00 even) (I believe that the price is now $12.49 USD + $5.67 S&H.) , which said it supported and supplied drivers for 64-bit Vista. It took a little over two weeks to receive the device from Hong Kong (received yesterday, 08-31-2007).
I checked the mini CD that shipped with it but found no Vista drivers. So I just plugged it into a USB port on the laptop. Vista immediately recognized the dongle and installed generic Vista 64-bit drivers from Microsoft. I tested the unit by placing the Treo near it. The unit recognized the Treo as a legitimate device! Next, I followed the directions I found in another thread that had been successful with USB 2.0, Vista 32-bit drivers, and the Treo 600, with one slight modification. Here is a repost from the Vista-Help.ca blog by Kerry Brown, verbatim except for a couple of modifications and few additional steps.
=============================================
Palm Treo 600 with Vista and Office 2007
I've had a lot of people ask about how I got my Treo 600 phone to sync with Outlook 2007 in Vista so I thought I'd write up the procedure. Hopefully Palm will have new Vista compatible software soon but in the meantime here's how I got it working on two computers so far. First you have to use Vista x86. I couldn't get it to work with Vista x64. If you've already tried to get it working then you have to clean up all the leftover stuff before continuing.
1. Uninstall Palm Desktop
2. Insert the CD that came with the Treo but don't let it autorun.
3. Navigate to the correct language folder on the Treo CD and right click on setup.exe
4. Set the compatibilty for XP SP2 and Run as administrator.
5. Run setup.exe
6. During the install the initial sync may fail. Just tell the installation to continue.
7. If you want to sync with Outlook make sure you pick this option during the install
8. Once it's finished close the Hotsync System Tray application.
9. In Windows Explorer go to the Palmone folder in Program Files.
10. Right click hotsync.exe and set it to run in administrator mode with XP SP2 compatibility.
11. Do the the same for palm.exe.
12. Start the Palm Desktop and change the Hotsync settings to manual start.
-and- 12a. ******* Check the Infrared option to make it active and available *******
13. Exit Palm Desktop and reboot.
You should now be able to sync the Treo 600 with Outlook 2007 or Palm Desktop. You will have to manually start the Hotsync application and deal with a uac prompt because it is set to run in administrator mode. The sync only works when Outlook is not running. You also have to sync twice. The first time you will get errors about the default folders for Outlook. Ignore the errors and press the sync button again. If it still doesn't work reboot and try it again. Good luck. Let me know if you find an easier procedure.
=====================================================
After rebooting the laptop, I performed the following additional steps:
A. Manually started the Hotsync app (you can put it in the Startup folder to auto load at Startup).
B. Set the Custom options to "Desktop overrides Handheld" for Contacts, Calendar, Tasks, and Notes - this may help avoid duplicates from the first Hotsync. Also, this is just a temporary override from the default setting "Synchronize the files" for each selection.
C. Selected Hotsync on the Treo and enabled the Infrared option.
D. Pressed the Hotsync 'button' on the Treo and placed it pointing at the Infrared dongle.
The Hotsync ran to completion without errors! Though it did take a good deal longer since it only runs at 115.2 kbps vs. the 480 Mbps of USB 2.0, I am happy.
Hope this helps others with Vista 64-bit systems and Palm OS handhelds.
Cheers.
-Robert
Post relates to: Treo 600 (Verizon)

Will this solution work for the Palm Treo 755p?
Post relates to: Treo 755p (Sprint)

64 Bits and Motif

Similar Messages

Maybe you are looking for