6630 not accepting settings

I have a 6630, I cannot use picture messaging e mail or internet connections. My phone will not accept settings from anywhere, I am on O2 and have tried their web site, and also rung the customer services, who said they would send them but my phone just wouldnt accept them. I had my phone near the computer and could actually hear the messages trying to get through.
Is there any way i can put settings in manually. I bought a ringtone at christmas and havent been able to access it
Can anyone help Please?

It means re installing the operating system.Be carefully to have this done in a nokia service unit and also keep in mind that some phones die when someone replaces a operator firmware with a generic one.If it does they have to send it to nokia and it takes some time and money.Also this is not covered by your warranty and u will lose your guaranty if u do it.If noting works u will have to take it to be re flashed bhut try this first.Back up the contents of your phone to your memory card or computer then input this code *#7370#.It will reset your phone to the factory settings clearing every thing in its memory.the phone will be as it was when u first took it out of the box.After that try again with the configuration messages or enter the settings manually.Hope it works.PM me if it doesent......Excellent phone 6630.Had mine for a year.Let me know how it works.
Best regards!
Phones i owned so far 6630,6680,N90,N93*

Similar Messages

Nokia 6630 not accepting car kit

hi, have a blooth car kit ck-7w which i have installed in car, but when i plug in phone (using it wired) phone is coming up enhancement not supported, on checking my phone in enhancements it shows ony, headset, loopset and handsfree but no car kit, can someone explain how to get it to recognise the car kit, thanks

Then I presume from your last post that you are connecting the CK-7W via a CA-27? vi the units POP Port.
I must stress at this point that there are two cables that will fit the CK-7W but the other cable will not work.
Gadget
Remember to mark all correctly answered questions as Solved. A forum is only as great as the sum of its parts, together we will prevail.

TS1398 I have been having network problems on my Ipad and I reset all network settings as advised in the article about problems connecting to networks. Now my Ipad will not allow me to sign onto any network....it will not accept the passwords for any net

My ipad has been a little glitchy for the last couple of weeks....not able to load pages because of DNS lookup failure and really slow loading...some of which has to do with the DSL service I have, but I followed the directions on one of the Apple wi-fi issues pages to reset network all connections..which I did, and now the Ipad cannot connect to WiFi because it will not accept (or cannot resolve..or??) password. I am sure I am typing the password correctly and have tried it on several routers..and it cannot cannect to any router properly even with the correct password. My laptop is connected just fine and it accepts the password and I have confirmed the password with the ISP and tried other routers.
So the question is what should I do if I am entering the right password and the Ipad can't sign itself on to the Wifi network?

Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are droping internet connection)
    •    Launch Settings app
    •    Tap on Wi-Fi
    •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
    •    In the window that opens, tap on the Renew Lease button
6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
~~~~~~~~~~~~~~~~~~~~~~~~~
iOS 6 Wifi Problems/Fixes
Wi-Fi Fix for iOS 6
https://discussions.apple.com/thread/4823738?tstart=240
How To: Workaround iPad Wi-Fi Issues
http://www.theipadfan.com/workaround-ipad-wifi-issues/
Another Fix For iOS 6 WiFi Problems
http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
How to Boost Your Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.h tm
Troubleshooting a Weak Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Sig nal.htm
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Connect iPad to Wi-Fi (with troubleshooting info)
http://thehowto.wikidot.com/wifi-connect-ipad
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
Wi-Fi or Bluetooth settings grayed out or dim
http://support.apple.com/kb/TS1559
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

Hi can any body please tell me how to open the .exe files in mac and why it is not supported with unarchiever app , also i am not able to run and dvd's in my mac its not accepting any cd's or dvd'd why do i need to do some settings for it ?

Hi can any body please tell me how to open the .exe files in mac and why it is not supported with unarchiever app , also i am not able to run and dvd's in my mac its not accepting any cd's or dvd'd why? do i need to do some pre defined settings to run the cd's and dvd's ?

A .exe file is a Windows executable. OS X does not run Windows programs. If you need to use .exe files then you will need to install Windows on your Mac:
Windows on Intel Macs
There are presently several alternatives for running Windows on Intel Macs.
Install the Apple Boot Camp software. Purchase Windows XP w/Service Pak2, Vista, or Windows 7. Follow instructions in the Boot Camp documentation on installation of Boot Camp, creating Driver CD, and installing Windows. Boot Camp enables you to boot the computer into OS X or Windows.
Parallels Desktop for Mac and Windows XP, Vista Business, Vista Ultimate, or Windows 7. Parallels is software virtualization that enables running Windows concurrently with OS X.
VM Fusionand Windows XP, Vista Business, Vista Ultimate, or Windows 7. VM Fusion is software virtualization that enables running Windows concurrently with OS X.
CrossOver which enables running many Windows applications without having to install Windows. The Windows applications can run concurrently with OS X.
VirtualBox is a new Open Source freeware virtual machine such as VM Fusion and Parallels that was developed by Solaris. It is not as fully developed for the Mac as Parallels and VM Fusion.
Note that Parallels and VM Fusion can also run other operating systems such as Linux, Unix, OS/2, Solaris, etc. There are performance differences between dual-boot systems and virtualization. The latter tend to be a little slower (not much) and do not provide the video performance of the dual-boot system. See MacTech.com's Virtualization Benchmarking for comparisons of Boot Camp, Parallels, and VM Fusion. Boot Camp is only available with Leopard or Snow Leopard. Except for Crossover and a couple of similar alternatives like DarWine you must have a valid installer disc for Windows.
You must also have an internal optical drive for installing Windows. Windows cannot be installed from an external optical drive.

New line will not accept stroke settings

Sometimes when I place a new line in illustrator, it will not accept the stroke settings that I try to give it after I draw the line and remains at no stroke, no fill. This doesn't happen everytime. Once it does, the only way I can get to line to accept any sort of stroke is to first assign it a graphic style and then change the stroke setting to what I am wanting. Has anyone else had this problem and it there something I may be doing to cause this?

Angela,
If it happens randomly while you are working with Illy, I am not sure, but it may be worth trying to Ctrl+Alt+Shift/Cmd+Option+Shift during startup or to Move the folder; both will reset the preferences, the latter more tediously but reversibly and more thoroughly.

RMAN settings in OEM not accepting changed password

Database 10.2.0.3.0, 32 and 64 bit versions.
OSes: Windows 2003 R2 Standard Edition
The previous DBA had the same password for the sys, system, and rman accounts. The RMAN backups are scheduled through the OEM's Backup/Recovery Schedule Backup. I finally changed the passwords so that sys, system, and rman are now different. I changed the rman password to be the same as in the Oracle rman account in the Windows local user accounts and made sure that the rman account is in the ora_dba account and that batch jobs are permitted. Note that these scheduled jobs were working just fine so I suspect the windows accounts are correctly configured. The rman account I'm using is the rman account used in a repository. This is the only Oracle rman account among all the databases that I backup.
I attempted to schedule a job to run immediately using the new password in the Host Credentials and I check the box for 'Save as Preferred Credential' but at the end of the run I get the error: RMAN-04004: error from recovery catalog database: ORA-01017: invalid username/password; logon denied
I'm logged into the OEM with the same exact system account log in as I would use from the rman command line target connection.
The Recovery Catalog Settings will not accept this new password. Instead I get the error message:
java.sql.SQLException: ORA-01017: invalid username/password; logon denied
After so many attempts the error message will say the account is locked and it is locked in the repository so it appears to be attempting validation against the correct location.
I prefer using the OEM over the Windows Task Scheduler - any ideas on what to do?
Edited by: pointreyes on Feb 4, 2010 8:30 AM - Discovered that a scheduled job ran immediately will fail to work as well.
Edited by: pointreyes on Feb 4, 2010 8:39 AM - note that I did not change all the passwords at the same time. The sys and system passwords were changed last week and the backups continued to work. Only after the RMAN password was changed did the backups fail.

EdStevens wrote:
pointreyes wrote:
Database 10.2.0.3.0, 32 and 64 bit versions.
OSes: Windows 2003 R2 Standard Edition
<snip>
I prefer using the OEM over the Windows Task Scheduler - any ideas on what to do?
Edited by: pointreyes on Feb 4, 2010 8:30 AM - Discovered that a scheduled job ran immediately will fail to work as well.
Edited by: pointreyes on Feb 4, 2010 8:39 AM - note that I did not change all the passwords at the same time. The sys and system passwords were changed last week and the backups continued to work. Only after the RMAN password was changed did the backups fail.This is exactly why I don't schedule my rman backups in OEM. I never was able to figure out what was going on under the covers, but if I have to recreate something every time I change the password, then I'm looking for a different approach. Since I work in Unix, create shell scripts to execute my rman backups, and schedule them with cron. If on windows, I'd take the same approach .. the one you prefer not to use. OEM is a great tool, but it's not the perfect solution for every problem.Actually this is not really an OEM problem. I discovered this when I changed the rman catalog schema owner password and then attempted to backup the system through a remote job on another server. I am surprised if you changed your rman catalog schema owner that you have not ran into this yourself. Unless you are doing backups from a centralzied server that the rman catalog resides on.
You come across all kinds of interesting things no matter which tool us use. For example we are to log onto the system using our personal accounts and then sudo to Oracle....guess what happened when the Oracle users password expired...
Now that was a fun day....other DBA..."Backups are not working.."....Me..."Yes they are just fine when I execute them.".....other DBA.."Well cron jobs do not work."....Me..."Anyone log in recently with Oracle user??"
Problem was that the Oracle user password had expired and was needing to be changed.....cronjobs don't like it when that happens.

My yahoo email account is not accepting emails with picture attachments. The Internet provider says it is yahoo. Yahoo had nothing to offer. Do I have to adjust settings on the iPad?

My yahoo account is not accepting emails with picture attachments. Other wifi features are working. Other iPad and iPhone devises using this wireless router are accepting photo attachments. How do I have to configure my ipad2 to accept photo attachments on it?

This did not help, thanks for the suggestion but my settings match this description on both devices and no result.

C60 with TC6.2.0 not accepting the persistent settings assigned to it.

Everytime we perform a factory reset or turn unit off/on a good portion of the settings are not transfered to the CODEC. Works great with TC5.1.13. We are running TMS 14.2.2 along with TMSPE 1.0

I just tested using an endpoint running both TC5 and with TC6 software, and after a factory reset, the password is typically blank.
With TC5 software, you can enter anything in the password field and the codec will accept the login. This is because when the codec password is blank, it ignores whatever is entered as a password and simply logs you in. Which explains why it was working for you when you were running TC5.1.13.
However with TC6 software, even though the password is blank, the codec will not accept anything as a password, unlike in previous TC releases. So if the codec password is blank, you must use a blank password, or else it will not log you in when running TC6 or later.

HT1918 on my account settings the shipping address is set on United States and it seems I cannot change it to UK... so my address is not accepted, what can I do?

on my account settings the shipping address is set on United States and it seems I cannot change it to UK... so my address is not accepted, what can I do?

To change it, you have delete the existing account. However you can avoid losing any pictures in the process. To avoid losing photo stream photos, save them to your camera roll (if not already there) before deleting the account. To do this, open your my photo stream album, tap Edit, tap the photos, tap Share, then tap Save to Camera Roll. (Camera roll photos are not effected by deleting the account.)
Then go to Settings>iCloud, tap Delete Account, then sign back in with the new ID. This deletes the account and your iCloud data from your device, but not from iCloud. Provided you are signing back into the same account, your iCloud data will reappear on your device when you sign back in.

HT1918 Hi out there ! I've updated my account settings with a new credit card but it will not accept it why I don't know as it is a valid credit card !

Hi out there ! I've updated my account settings with a new credit card but it will not accept it why I don't know as it is a valid credit card !

Contact iTunes Customer Service and request assistance
Use this Link > Apple Support iTunes Store Contact

IPad settings facebook will not connect with server and keeps asking me for a password which it will not accept.

Ipad 4 keeps asking me to put a password for Facebook on settings. It will not accept my password which I can use on safari and when you go to settings and open facebook it cannot connect to the server.

Ipad 4 keeps asking me to put a password for Facebook on settings. It will not accept my password which I can use on safari and when you go to settings and open facebook it cannot connect to the server.

Ipad Facebook issues, under "settings" Facebook will not accept my password, nor will it delete the account. Have tried deleting the FB app and installing it again, have tried restarting ipad, any thoughts?

Ipad Facebook issues, under "settings" Facebook will not accept my password, nor will it delete the account. Have tried deleting the FB app and installing it again, have tried restarting ipad, any thoughts?

same problem SO FRUSTRATING

WET54G v3.1 Will not accept the default password for web setup

The setup:
1 2WIRE wireless router for AT&T DSL connection
1 wireless laptop, online and good to go
1 desktop, too far from router to connect with an ethernet cable, this computer does not have wi-fi
1 new WET54G v3.1, trying to setup as a wireless-ethernet bridge to get the wired desktop on the network and online
I have set up the desktop with static IP: 192.168.1.1; Subnet 255.255.255.0; Gateway 192.168.1.226. The WET54G is directly connected to the desktop. I open Internet Explorer and go to 192.168.1.226. After entering the password "admin" and leaving the username blank, the login prompt simply reappears as if the password is incorrect. I have reset the WET54G to factory defaults numerous times (held the reset button for over 30 seconds). It simply will not accept the password.
Any suggestions? I tried live chat but the chat window was so slow and buggy that both times it seemed we were about to make progress the window would freeze up or refresh entirely and disconnect me. Extremely frustrating to say the least.
Thanks,
Sean

Hi brickmonkey,
Sorry for taking so long to get back on this. We left for a long vacation and I got ridiculously busy when we got back. ANyway I just spent some time working on this and wanted to report back. Still didn't get it to work.
Got into the 2Wire and wrote down it's settings:
Router Address: 192.168.1.254
Subnet Mask: 255.255.255.0
Default Gateway: (???) I did not see this under the summary page, but it was on the internet connection details page., it's a 151.x.x.x number, which the WET54G was not happy to accept as the default gateway. It gave me the error "DUT and Gateway cannot locate in different subnet." Also, on that internet connection details page, an additional subnet mask of 255.255.255.255 was listed, but I'm guessing 255.255.255.0 is the correct one to use, right?
Because it wouldn't accept that 151.x.x.x address, I can't get any farther. I did notice when setting up the SSID and security to match that of the 2WIRE, the channel was fixed at 6 and the dropdown was disabled. I changed the 2WIRE from 1 to 6 in case that was an issue. The WET54G is in Infrastructure mode, as the guide you linked to indicated.
Any thoughts with this new info?
Thanks again for your help with this,
Sean

Regarding mountain lion server: clients experience intermittent service connections. the server system log has the following error- Client handshake failed (6):113: Server not accepting client connections (any ideas???)

regarding mountain lion server: clients experience intermittent service connections. the server system log has the following error- Client handshake failed (6):113: Server not accepting client connections. any suggestions would be greatly appreciated - thank you

Hi Jason
I was getting the same behavior after Apple support had me delete some plist files to get Airplay going. I was also getting the following error:
the error occurred while processing a command of type 'writesettings' in the plug-in 'server vpn'
I went into ~/Library/Preferences/ and /Library/Preferences/ and deleted every plist contating the word server. I had to re-set up my server (meaning walk through some intial steps) but all of my settings were still there after that and everything started working again.
Just a thought, obviously try at your own risk but it worked for me.
Kellen

Apple id password not accepted on icloud

why is my apple id password not accepted when I try to login to iCloud? The same password worked when I tried to login to support to post this question!

If Settings>iCloud is showing your old email address, go to https//appleid.apple.com, click Manage my Apple ID and sign in with your current iCloud ID. Tap edit next to the primary email account, tap Edit, change it back to your old email address and save the change. Then edit the name of the account to change it back to your old email address. You can now use your current password to turn off Find My iPhone on your device, even though it prompts you for the password for your old account ID. Then go to Settings>iCloud, tap Delete Account and choose Delete from My iDevice when prompted (your iCloud data will still be in iCloud). Next, go back to https//appleid.apple.com and change your primary email address and iCloud ID name back to the way it was. Now you can go to Settings>iCloud and sign in with your current iCloud ID and password.

6630 not accepting settings

Similar Messages

Maybe you are looking for