7.1.1 - Not launching. Error code -600

Help! I recently upgraded itunes to 7.1.1 (as well as Mac OS to 10.4.9) and ever since Itunes has simply refused to open. When I try from the Dock it doesn't respond, but appears as "not responding" in the Force Quit menu. When launched from a finder window I get an "unexpected error" error code -600.
I have tried reinstalling both OS 10.4.9 and itunes 7.1.1.
Any ideas? I am at my wits end!

I took the advice of one of the other people on here and deleted the ~/user/library/cache folder. After a reboot this worked. i would move the folder to the desktop first and then reboot and re-try iTunes. I have not upgraded to 7.1.1 yet as i wanted some stability since I got 7.1 working.

Similar Messages

Error Code -600 Proc Not Found

Getting the error while running FCP and DVD Studio Pro, also while running Excel and Word and recently while on AfterFX and Photoshop. I haven't a clue what "no eligible process with specified process serial number" or the definition of Error Code -600 could be pointing to.
The computer will intermittently freezes in these programs (each time running two) and then I won't even be able to get the computer to force quit or shut down from the pull down menu.
Recent tune-ups include tossing FCP.plist and caches folder from library.
I loaded in an Avid Xpress Pro 5.6.4. update very recently and also hooked up a loaner Lacie. Not running Avid however, decided to cut my project in FCP.
Maybe related, one of my Lacie's keeps cycling on and off. I ran Disc Utilities on it and a repair was made. It still keeps cycling on and off. At least I think it's the same drive. It does it so quickly and the icon and project stay in-tact that frankly not sure if it's the same drive or another.

The problem with your LaCie disk may be related. Try disconnecting it from your Mac to see if that helps. You should contact LaCie to find out what's wrong with that disk.

Unexpected Error Occurred (error code -600) after Leopard Installation

Installed Leopard for the second time.
Everything seems to work fine, but after opening and then closing Mail, I'm unable to open it via the dock. Tried to open by selecting from the applications menu, and get the following message:
The operation could not be completed.
An unexpected error occurred (error code -600)
Same thing with Backup, Parallels too.
Shutdown behavior is odd. From the apple icon, shutdown doesn't work, everything goes away on the desktop, then the spinning wheel (not beach ball), then nothing. Have to power off to quit, can't be good for the hardware.
Any suggestions, or am I doomed to a clean install and reinstalling all of my applications? Thankfully I have a drive backed up with SuperDuper with 10.4!
Thanks for the help.

OK, I've got ContentBarrier X4 installed and this was the cause of my error codes and it looks like several - if not all of my installation issues with Leopard.
Apparently, perhaps with Login KeyChain update, it wiped out the ContentBarrier administration name, and on launch, it was likely blocking the applications.
First, install the Login KeyChain update (see Apple software download page).
Reinstalled ContentBarrierX4 http://www.intego.com/services/updates.asp (make sure to select ContentBarrierX4).
Open ContentBarrierX4 - you'll have to sign in as the administer. You may have to go into Preferences > Accounts > to make sure that you've got admin rights.
Once you logged in, exit, then reboot.
For the first time since installing Leopard, I can shutdown without a hard power off.
Salvation...

Keep getting "Error code 600" when trying to open itunes.Lost my tunes??:(

I left my computer on for a couple of days and had closed down itunes. when i tried to open it back up the " error code 600" came up and i cant get to my music. can anyone help me!

wmv is a Windows Media format. I don't know why Realplayer is coming into it since that deals primarily with Real format files and maybe a few generic formats.
You need
Free Flip4mac QuickTime player components - http://www.microsoft.com/windows/windowsmedia/player/wmcomponents.mspx
After installation a new Flip4Mac pane will appear in System Preferences. Make sure you set the boxes to ensure that it will play WMV files in Quicktime.
or play the files with VLC
VLC media player - http://www.videolan.org/vlc/ - general media player that plays just about anything.
While you're at it you might install:
Perian codecs for Quicktime - http://www.perian.org - plugins to add functionality to Quicktime for playing additional audio and video formats
Quicktime audio problems, Perian, VLC - http://discussions.apple.com/message.jspa?messageID=9013669 - read note about uninstalling prior DIVX support before installing Perian.
Perian doen't do WMV but it's handy to get many things to play in Quicktime.
Note, if these are protected WMV, nothing on a Mac will play those (unless you also have Windows installed).

Final Cut Constantly crashes, Plus error code -600 half the time

Please someone help. I have the newest and fastest Imac available and final cut studio 2, all of the software is up to date. I'm currently running tiger. What is wrong. I've had no problems in the past, and recently the problems keep coming up more and more. I can't even open my project for more than 2 minutes before it will jam up on me. I have to force quit the program, then half the time I'll get error code -600. So I'll have to restart the computer and try again. I have my media files on an external hard drive. I don't know what is wrong. Is it because I have all the files including the project files on the hard drive? Anyone have any suggestions? Should I re-install my final cut program or move all my files from my external hard drive to the one and only internal one. (defeats the purpose of only being able to use one hard drive though.)

I'm using standard DV files. I've seached and searched for answers to this problem, and no one has answered anyone yet, other than try to update your software. I forgot to mention that also this system will not restart, and has to be forced off by holding down the power button, and also it loses an entire day of work! Twice it has done this to me. I have backups set to every 10 minutes, I also saved the project on 2 seperate files, and on seperate hard drives. Both projects reverted back to an entire day missing, back up files and all. I never lost this much data and work with premiere. The only reason I switched is because my TV Station uses final cut pro, and everyone hates it. I'm starting to find out why..... Is there a number I can call, the forums don't seem to have any answers, neither does google.

"AN UNEXPECTED ERROR OCCURED (ERROR CODE -600)" HELP...

I was trying to open a FC EXPRESS HD and this message came up:
"THE OPERATION COULD NOT BE COMPLETED"
"An Unexpected Error Occured -ERROR CODE -600-.
If someone can help me. I'll appreciate.

It appears that the last time Final Cut Express was used, it didn't completely quit. Open the Activity Monitor in the /Applications/Utilities/ folder to force quit it if it shows up; if it doesn't, save your open documents in other applications and quit the loginwindow process. You may now be asked to log in again or be logged in automatically depending on how the computer is set.
(24809)

Intermittent behavior and Error Code: -600

I would first like to state, I have not any issues in the last 5 years. I went from Jaguar to Tiger, without a hitch. Of course, this is very old G4/450 [Will be getting a Mac Pro fairly soon]. For the most part, everything has been near perfect. However, recently I installed ProAppRuntime.pkg v.4.0. Now, I have intermittent problems with applications that suddenly stop functioning correctly. This is usually preceded by getting the spinning beach. Today, iTunes just stopped working, ultimately forcing me to have to Force Quit the application. Then, once one app does it, if bad enough, other apps start to collapse as well. Now, even though it may seem like I Force Quit, the Dock still shows the App as still functioning. It won't force quit at all. Then if I try to relaunch the App, directly, The error I get is Error Code: -600. There is very little read about it for me to make any sense of it. I ran Virex [yes, up to date], which as usual, there is nothing to fret about there. Though, it has been a while since I de-fragged my drives. But, I can't imagine that would be the cause of the problem... or would it?
Update: I can repeat this intermittent problem using iTunes v. 7.1.1.
G4/450 with 768MB of RAM, Two Seagate 80GB HD's, with SCSI card with two SCSI drives. Running Mac OSX Tiger v.10.4.9.

On my System/Apps HD 80GB [Master] = 57GB of Free Space.
On my Second HD [Slave] = 27GB of Free Space
On My 3rd HD 17GB Internal SCSI = 811MB of Free Space
[this is where all my music is stashed]
On my 4th HD, 4GB Internal SCSI = 1.2GB of Free Space
OS9 HD/OS9 Apps.
Yes, all RAM is listed. I did some investigation, checked that as well. Then I ran a couple of utilities, iDefrag to see if the drive are in need of defragging, it looked like I should consider defragging. However, I ran Onyx, just clean out my caches before I CCClone to alternative drive and it told me "This Volume needs to be Repaired". So, I think I've got my answer.
If anything, thank you in advance for any advice you leave, I am going to start of OSX CD and see what's up.

What does (error code -600) mean?

What does (error code -600) mean?
I received this code in a pop up window while trying to open iTunes from my Apps folder.

procNotFound
= -600, /*no eligible process with specified descriptor*/
Could be many things, we should start with this...
"Try Disk Utility
1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
*Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair Disk, (not Repair Permissions). Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)
If perchance you can't find your install Disc, at least try it from the Safe Boot part onward.
Any change?

Error code -600 and all applications quiting unexpectedly

Hi all I need your help!?! I'm having a problem launching my programs. When I click or double click on a program, it will launch but will then immediately give an error saying "the application _________ quit unexpectedly." This is happening with all of the programs on my computer.
Second problems is with my files. I'm getting an error code -600 when opening up a file. That includes jpg. and doc.
Please Help

Hi,
2.5GB is dangerously low. I'd guess you have a 40GB drive, so you should try to keep at least 8-10GB free, which you can determine easily in the bottom of any Finder window. The maxed disc space could be causing problems to your system like sluggishness, but I doubt it is causing all your apps to quit unexpectedly. That is probably more related to some kind of directory corruption. So, what do you do? Usually when apps start crashing unexpectedly the first step is to delete the preference file for the offending app. The preference file look like this, apple.com.iphoto.plist. All the preference files are in the same pattern, it's only the name of the app that changes. You'll find them at <hard drive/library/preferences< or you can just search the individual app preferences in the search box of the Finder window. Try deleting one or two for offending apps and see if they still crash. Also, because your directory is a bit funky you should run a maintenance app like Onyx. Install it and run Maintenance. It should sort out the directory issues to get your machine running again. Try these and post back with your results.
I also noticed your profile states 10.4.1. You should update to 10.4.11.
Onyx - <a class="jive-link-external-small" href="http://">http://www.titanium.free.fr/pgs/english.html
Make sure you get the right version for your OS.
Good luck!

Error Code 600 Autodiscover

I am using Exchange server 2007 i am facing issue activesync,
my users are not able to emails from their smartphones
https://autodiscover.mydomain.com/autodiscover/autodiscover.xml
<?xml version="1.0" encoding="utf-8" ?>
- <Autodiscover xmlns="http://schemas.microsoft.com/exchange/autodiscover/responseschema/2006">
- <Response>
- <Error Time="12:31:17.3655146" Id="2053059689">
<ErrorCode>600</ErrorCode>
<Message>Invalid Request</Message>
<DebugData />
</Error>
</Response>
</Autodiscover>
https://mail.mydomain.com/autodiscover/autodiscover.xml
<?xml version="1.0" encoding="utf-8" ?>
- <Autodiscover xmlns="http://schemas.microsoft.com/exchange/autodiscover/responseschema/2006">
- <Response>
- <Error Time="12:31:19.5627343" Id="2053059689">
<ErrorCode>600</ErrorCode>
<Message>Invalid Request</Message>
<DebugData />
</Error>
</Response>
</Autodiscover>
[PS] C:\Users\Administrator.Mydomain\Desktop>Test-OutlookWebServices | fl
Id : 1003
Type : Information
Message : About to test AutoDiscover with the e-mail address Administrator@mydomain.
Id : 1007
Type : Information
Message : Testing server MAIL.mydomain with the published name https://mail.mydomain/EWS/Exchange.asmx & .
Id : 1019
Type : Information
Message : Found a valid AutoDiscover service connection point. The AutoDiscover URL on this object is https://mail.mydomain/autodiscover/autodiscover.xml.
Id : 1006
Type : Information
Message : The Autodiscover service was contacted at https://mail.mydomain/autodiscover/autodiscover.xml.
Id : 1016
Type : Success
Message : [EXCH]-Successfully contacted the AS service at https://mail.mydomain/EWS/Exchange.asmx. The elapsed time was 609 milliseconds.
Id : 1015
Type : Information
Message : [EXCH]-The OAB is not configured for this user.
Id : 1014
Type : Success
Message : [EXCH]-Successfully contacted the UM service at https://mail.mydomain/UnifiedMessaging/Service.asmx. The elapsed time was 181 milliseconds.
Id : 1016
Type : Information
Message : [EXPR]-The AS is not configured for this user.
Id : 1015
Type : Information
Message : [EXPR]-The OAB is not configured for this user.
Id : 1014
Type : Information
Message : [EXPR]-The UM is not configured for this user.
Id : 1017
Type : Success
Message : [EXPR]-Successfully contacted the RPC/HTTP service at https://mail.mydomain/Rpc. The elapsed time was 16 milliseconds.
Id : 1006
Type : Success
Message : The Autodiscover service was tested successfully.

Hi
Error code 600 is an expected result. that means the Autodiscover directory is working fine.
What error is exchange logging in the application event log regarding users trying to sync phones? Are they domain admins at all? Inheritable permissions ticket?

Flash cannot be launched error code -10810

I try to launch Flash. I've been using just fine for a while
and all I get is this:
Flash cannot be launched error code -10810
don't know what to do. I figure something is corrupt
somewhere. I moved Flash Preferences out of its folder, in the hope
that was it. Should I just reinstall Flash or what?
I'm using a mac.

Hi Srinivas,
Thank You for the instruction re: SIFC, this has helped, the browser starts and I arrive at the Netweaver logon screen.
However at the logon screen I seem to be encountering further errors, I have attempted to logon on, the dialog box does not appear, details from the logon screen are as follows:
No switch to HTTPS occurred, so it is not secure to send a password
SSO logon not possible; logon tickets not activated on the server
Choose "Log On" to continue. A dialog box appears in which you can enter your user and password
No switch to HTTPS occurred, so it is not secure to send a password
System:
*Client: **
User:
Password:
Language:
English EN
German DE
Log On
Change Password
Any further advice here would be most appreciated.
Regards,
Mart.

Error accessing file template file not found (error code 2)

We have 3 admins that work on the website so we use the Check In/ Check Out feature of DW. We all have DW CS6.
When I update the template I have no problem (I work on a mac). However, if one of the other admins (Windows) tries he gets the following message: Error accessing file template file "C:\filepath\filename.dwt": file not found (error code 2).
I looked at this thread: Re: Dreamweaver Template not updating pages error code 2? but the only solution offered there is to change the template tag from <!-- InstanceBegin... to <!-- TemplateBegin... If this is the solution, how do you do this?
When I go to the url of the template http://www.christophorushouse.com.au/Templates/chrv-main-template.dwt it says it's been (re)moved or renamed, but then I have a feeling you can't view/access a template this way. All pages of the website feed of this template.
Any help would be appreciated.
Thanks

We have 3 admins that work on the website so we use the Check In/ Check Out feature of DW. We all have DW CS6.
When I update the template I have no problem (I work on a mac). However, if one of the other admins (Windows) tries he gets the following message: Error accessing file template file "C:\filepath\filename.dwt": file not found (error code 2).
I looked at this thread: Re: Dreamweaver Template not updating pages error code 2? but the only solution offered there is to change the template tag from <!-- InstanceBegin... to <!-- TemplateBegin... If this is the solution, how do you do this?
When I go to the url of the template http://www.christophorushouse.com.au/Templates/chrv-main-template.dwt it says it's been (re)moved or renamed, but then I have a feeling you can't view/access a template this way. All pages of the website feed of this template.
Any help would be appreciated.
Thanks

When I try to print from web page I get "printer not activated - error code 30", but I can copy text into Word document & printer works.

I am unable to print anything from an internet web page. I continually get "printer not activated, error code- 30" followed by "An unknown error occurred while printing". I can copy the material from the web page, place into a Word document and then print. This just started yesterday and I have no idea why. Would appreciate your advice!

See this:
[http://kb.mozillazine.org/Problems_printing_web_pages#Prints_to_a_small_portion_of_the_page]

When I try to print from web page I get "printer not activated - error code 30", printer works on Internet Explorer

When I try to print from web page I get a dialogue box "Printer not activated - error code 30" followed by a dialogue box "An unknown error occurred while printing". The printer works on websites when I use Internet Explorer. Also, if I copy the web page and paste it into a Word document, I can print a copy. This issue just started this week; I have not encountered this problem prior to this week. Please advise.

What does that error message say?
See this: http://kb.mozillazine.org/Problems_printing_web_pages

Activation error: Printer not activated, error code 20

I have had my officejet 4215 all-in-one printer well over a year and it has connected and printed whatever I wanted. Yesterday when I wanted to print an email it would not and the following box popped up: Activation error: Printer not activated, error code 20. Then the next box that popped up said: Printer Error An unknown error occurred while printing.
If I copy the email over to a Microsoft Windows page, then i can print it fine.
Any idea how to fix this so I can print email's like I used to?
Rey

What operating system? What email program are you trying to print from?
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

7.1.1 - Not launching. Error code -600

Similar Messages

Maybe you are looking for