7.1.2 update blocking 3rd party app communication.

Since update wifi has been cutting out and in and now i cannot log into 3rd party applications.

If the above doesn't work, try reset all settings
Settings>General>Reset>Reset All Settings
Note: Data will not be affected but settings for Wi-Fi, FaceTime, Message, Home Sharing, Wall Paper, Sound etc will be reset

Similar Messages

  • "Software Update" for 3rd Party Apps?

    Hi,
    Does anyone know of an application that could act like Software Update for 3rd party programs, so that a list of updatable applications shows and you can select to download them all at once?
    I know some do an update check on launch, but I was just wondering if there was a more convenient way?
    Thanks,
    Ben

    Yes, but no. App Update is a widget that will check for updated versions of your apps. It can be found at http://www.apple.com/downloads/dashboard/status/appupdate.html. Unfortunately, it won't install them for you, but will give you links to websites where you can download the newest version. I use it and like it. Give it a try!

  • 3rd party apps crashing with 3.1

    I have a 3GS running 3.1, and after updating all 3rd party apps are crashing when I try to launch them. The app's splash screen will load, and then it'll go back to the iphone app screen.
    I've tried restoring and that didn't help.
    I then tried deleting and redownloading apps, and that didn't help.
    Has anyone found a way to fix this?

    this is Apple's response:
    Dear Corey,
    Thank you for contacting the iTunes Store. I understand that your applications are crashing, and have not been able to use it because it quits unexpectedly when you try to open it on your device. I know this is frustrating, and I will try to provide as much information as I can to help you resolve it.
    Corey, it's possible that the application became corrupt as it was downloading. Because you purchased the application and the installation was not successful, you may download it again at no charge. I recommend that you delete the application from your device and from iTunes, and then download the application to your computer and sync your device to your computer.
    To uninstall the application from your device Corey, tap and hold its icon on the home screen until the icons wiggle. Then tap the "X" next to icon of the application to delete it. To stop the other icons from wiggling, press the Home button.
    To delete the application from iTunes, open iTunes and click Applications on the left, then click the icon of the application. Press the Delete key on your keyboard, then click the Remove button, and then click the Move to Trash button.
    Now, using your computer, sign in to your iTunes Store account and attempt to purchase the application again. You will be notified that you have already purchased the application and will be allowed to download it again for free. After downloading the application to your computer, sync your device to your computer.
    If your computer is not available Corey, you may try purchasing the application again using the App Store on your device.
    If the application quits unexpectedly even after you reinstall it, please reply to let me know. I will be happy to assist you further.
    Please note that if you download other types of iTunes Store content—such as songs or videos—and find that they are unusable, it’s not possible to simply delete them and download them again. Instead, you must sign in to your account, access your Purchase History, and click the "Report a Problem" button.
    Thank you for being an iTunes Store customer Corey. We appreciate your business. We here at the iTunes Store appreciate your business.
    I did this with a few apps, and most worked, but a couple still display the same launch/crash symptoms. Also, i have several apps that if I delete them from the phone, I would loose information entered into them, so this solution is fair from ideal. I'm also running Blizzard's Authenticator, which I can't easily remove from my battle.net account without logging in, and I can't log in without the authenticator working.

  • Updated Carrier Settings - All 3rd party apps now crash on startup.

    Updated the new Carrier Settings today. Now all 3rd party apps on the iPhone crash on startup. Am I the only one experiencing this?
    Rebooted several times
    Running 3.1 (7C144)
    Thanks!

    Just wanted to post in the event someone else had the same issue. I did a restore and reset. All third party apps went away (poof).
    I had to manually re-install my apps from the app-store. Thank goodness iTunes tracks your previous purchases.
    -David

  • Help after updating the OS to 4.3.3 none of the 3rd party app work

    Help after updating the OS to 4.3.3 none of the 3rd party apps work at all they just flash up on the screen and then die.

    install a free app (or any other app) from the app store, then the problem will be fixed.

  • I am attempting to update students' iPads using the Apple Configurator software. However, information for 3rd party apps, like Notability and Explain Everything, is being lost.

    I am attempting to update students' iPads using the Apple Configurator software. However, information for 3rd party apps, like Notability and Explain Everything, is being lost.

    Mike,
    If by "still nothing" you mean they are not showing up in the AU manager after reinstalling them....
    Im guessing the AU Cache itself is now corrupted so.....
    Quit LPX
    Open Finder
    Press the option key and click "Go" in Finder's menu and select "Library". (This is the User Library and not the System Library and is normally hidden which is why you have to hold down the option key when clicking on Go.... to reveal it in the drop down menu that will appear)
    Go to "Caches" dir and remove "AudioUnitCache" dir.
    Now Restart your Mac.....
    and then Launch LPX and let it rescan your plugins and see if that fixes things....
    Fingers crossed...
    Nigel

  • Existing 3rd party apps I own - Will they be updated by the store?

    So here's an oddity some folks have already noticed. The MAS (Mac App Store) recognizes installed Apple apps and some 3rd party apps. It seems to be tied to the version number and bundle ID of the app you have installed vs. the one in the store. For example, along with MAS recognizing my installation of iLife and Apple Remote Desktop on my MBA, it also recognized Things (http://itunes.apple.com/us/app/things/id407951449?mt=12). It did not, however, recognize Evernote (http://itunes.apple.com/us/app/evernote/id406056744?mt=12). In that case, the version number was different and it also looks like autoupdating is pulled from the MAS version in lieu of the MAS' own update process.
    So here's the question - if an app like Things is recognized, will it be included as part of the MAS update process?
    Jeff
    Message was edited by: Rgbyhkr

    Rgbyhkr wrote:
    So here's the question - if an app like Things is recognized, will it be included as part of the MAS update process?
    Got an answer from a post Cabel Sasser made on Panic's blog:
    http://www.panic.com/blog/2011/01/panic-on-the-mac-app-store/
    Cabel:
    UPDATE: The Mac App Store may show software bought from us previously as “Installed”, even though they’re two different licenses. You will not get Mac App Store auto-updates unless you purchase from the Mac App Store. To re-enable the “Purchase” button in the Mac App Store, just drag the app to the trash and empty your trash. Your preferences/sites will not be affected.
    I hadn't considered the licensing issues, but it makes sense. So the answer to the original question is a confirmed no.
    He also confirmed your theory that the application fingerprinting method is a combination of bundle ID and version number. The bundle identifier for Evernote is unchanged between 2.0 and 2.0.1, so I'm probably right about MAS only recognizing versions of apps which it has distributed.

  • Block 3rd party updates

    hello,
    We provide the latest company approved products via SCCM Software Center. Products like Adobe, JAVA etc are included however they send far to many updates for us to change SCCM for ever minor release, additionally our users do not have admin rights so they
    cannot install the updates the 3rd party is constantly prompting them for.
    So I guess I'd like to find a ways to block those update prompts or find a way to allows just those approved products install by non admin users or anything you think might be better solution :-)

    > So I guess I'd like to find a ways to block those update prompts or find
    You need to identify the related registry values or startup services and
    background processes that disable auto-updates - for each product. Then
    deploy settings accordingly...
    Martin
    Mal ein
    GUTES Buch über GPOs lesen?
    NO THEY ARE NOT EVIL, if you know what you are doing:
    Good or bad GPOs?
    And if IT bothers me - coke bottle design refreshment :))

  • 3rd Party Apps No Longer Work After Update

    I just got my iPhone today and installed a few apps, Cube and GuitarChords. Both apps were working fine earlier. Later I connected the phone to my PC and it requested that I perform an update to v2.2, which I did. After the update, neither app would start. When I pressed the icon, it seemed to start for a few seconds then went back to the main screen. I reinstalled the apps and GuitarChords worked, but Cube still wouldn't start. I then did a hard reset (holding home and lock button) and now neither app will open again. All the apple apps start fine. Can anyone tell me what I need to do to get the apps working again?
    On a similar note, how would you guys rate the stability of the iPhone at this time. I mostly use my phone for business, so if it's still pretty buggy I'd like to return it and get back on my Win Mobile phone for now. Thanks in advance!

    IT DID IT AGAIN!!!
    I didn't change or update anything. I was using the Touch Term ssh client this morning and it was working fine. I tried using Win Admin later this afternoon and it wouldn't start, none of the 3rd party apps would. Again I tried the soft and hard resets. I even tried resetting the phone in the general menu. After looking around online, I see that this is an extremely common issue. I'm going to return the iPhone tomorrow and have my Tilt reactivated.
    I don't know if Apple monitors these forums, but if so they should take note; if they intend to make a dent in the enterprise market, stability needs to be a top priority. Sure, Windows Mobile doesn't have a very pretty or friendly interface, but it's quite reliable. In the year that I had my Tilt, it crashed once, and that was the fault of buggy software I had installed. Honestly, this being the first Apple product I've personally owned leaves a poor impression of the brand. I know Apple can do better, I manage several Macs at work and I almost never get support calls from those users. I really like the iPhone, and hopefully Apple can get their priorities straight and work out the issues, as I would like to give it another go in the future.
    Thank you again to those who responded to my question earlier.

  • Not receiving emails and downloading 3rd party apps

    Hi everyone,
    I am the new kid on the block with blackberry. I have a blackberry 8300 smartphone but I am have the following issues using it:
    1. I can send out email from the blackberry email I set up on my blackberry through my network provider, I can not receive any email to the account.
    2. I am unable to add my Lycos.com email address to the blackberry,
    3. I am unable to download any 3rd party app on my blackberry, I get a message that the IT policy on my phone does not permit me to download third party app.
    I have spoken to my network operator several times about this issue but no joy. Any idea on how I can resolve this, will be appreciated.
    Seun01

    Hi and Welcome to the Forums!
    There seems to be a widespread BB service outage at the moment. I suggest you stay tuned to these forums for updates and, after it is all clear, try things again...the things you note are all affected by this outage.
    Cheers!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Airplay on Apple TV not working after upgrading to iOS 8 (3rd Party Apps)

    Hi
    I hope someone can help me with this issue.
    After upgrading the iPhone 5 and iPad 2 to iOS 8.1, as well as upgrading the Apple TV to the latest version, I now end up with ** some ** videos as well as photos that can't be played over AirPlay on 3rd Party Apps. (Note: I have no issues with 'mirroring' from the iPad to the AppleTV though.)
    1.   It can play .mp4 and .mov files;
    2.   It could NOT play .mkv or .avi files - there's audio but NO video
    3.   It can play the photos and videos from Apple's own apps (i.e. 'Videos' and 'Photos') however (i.e. with both audio and video)
    4.   It could NOT display any photos from 3rd Party Apps
    5.   This is happening to more than one 3rd Party Apps (i.e. no display of photos; and no video though there's audio)
    Fyi, I've emailed to the respective Developers, but after reading some of the threads in this forum, I suspect that the root cause could be with iOS 8 (as well as the latest software update to AppleTV) as I didn't have this problem at all under iOS 7.
    Anybody has any solution?
    Thanks in advance.
    Thim Fook, Law

    Hello Niket,
    Sorry to hear that you are not able to get your iPhone to see your Apple TV. Take a look at the article below for some general troubleshooting to get it to show back up on your iPhone. Let me know if this works or if you are still having issues. 
    Get help using AirPlay and AirPlay Mirroring on your iPhone, iPad, or iPod touch
    https://support.apple.com/en-us/HT204291
    Regards,
    -Norm G.  

  • 3rd party app alerts no longer show up in the notification center

    I upgraded my iPhone 5 to iOS7 last week and ever since alerts for 3rd party apps (like gmail and others) haven't been showing up in the notification center.  I've checked my settings for both the notification center and for my individual apps to make sure they weren't reset, made sure my apps were up to date (not all of them have had updates since iOS7 was released but some definitely have), tried toggling them on and off and rebooting, but so far nothing has helped.  The banner alerts work, but nothing pops up in the notifications.  Has anyone else experienced this or have any other ideas how to fix it?
    I've generally been pretty pleased with the new version of iOS, but I'm hating everything about the changes made to the notification center.  Even if I do get my notifications to work again, I hate that we're forced to have that "Today" tab even if you switch the summaries off!  I like the unified page from iOS6 much better.

    Hi cyn999!
    I have an article that can help address this question:
    iOS: Understanding notifications
    http://support.apple.com/kb/HT3576
    As you can see in the screenshot, the weather does show up in the notification center, but it is in text form instead of icon form in iOS 7. Thanks for coming to the Apple Support Communities!
    Regards,
    Braden

  • Can't open any 3rd party apps - they crash on startup

    I've been an iPhone owner since the first model (I have iPhone 4 now), and I've never seen anything like this.
    Last night my iPhone ran out of charge. This morning, when I plugged it in it had to charge for a few minutes before it would turn on. Once it turned on, it said "waiting for activation: this may take a while". I thought this was strange, because my phone is already activated. I'm in an area with no reception, though, so maybe that was the issue.
    Once the phone turned on, I tried to open some of my apps. But none of the 3rd party apps would open! When I tap them they appear to open but they shut down / crash right away. Strangely, however, all of the Apple apps that come with the phone will open without a problem (Maps, Mail, Safari, iCal, etc.).
    I tried a hard reset but that didn't help. I'm away from home so I can't do an erase and store, and I really need access to some of the data in those apps.
    Any ideas?

    I did the same this week. I did a sync and now I can't access any of my apps. They appear to open then shut right back down. Have tried to resync, update and about anything else that may fix and nothing. Paying an aweful lot of money just for texting and phone usage. Anyone know how to take care of this issue? I have a 3G phone and been using it for a year without this problem

  • XML Encoding from SBO - Unable to Read in a 3rd Party APP

    Hi:
    I have created an Add-On app that produces an XML document file when a new item is created or an existing item is updated. However, the 3rd party app that I am trying to integrate into is unable to read this XML. After doing some research, the following appears to be the issue.
    SBO produces the data with UTF-16 which is a double byte encoding for XML's. The 3rd party app that I have appears to be able to handle only single byte encoding formats such as UTF-8 or ISO-8859-1. Can anyone please tell me whether it is possible to change the encoding format in my Add-On code?
    Thank you.
    Kushal Dutta

    Kushal,
    The forum that you have posted your question in is for questions related to the SAP Business One Integration for SAP NetWeaver.  Your question seems to be related to the SAP Business One SDK and should be posted in the SAP Business One SDK Discussion Forum.
    Eddy

  • XML Encoding from Business One - Unable to Read in a 3rd Party APP

    Hi:
    I have created an Add-On app that produces an XML document file when a new item is created or an existing item is updated. However, the 3rd party app that I am trying to integrate into is unable to read this XML. After doing some research, the following appears to be the issue.
    SBO produces the data with UTF-16 which is a double byte encoding for XML's. The 3rd party app that I have appears to be able to handle only single byte encoding formats such as UTF-8 or ISO-8859-1.
    I would like to know if there is a way in SDK to convert the output XML format to a single byte encoding such as ISO-8859-1. Can anyone please tell me how to achieve that in my Add-On code?
    Thank you.
    Kushal Dutta

    Hi Kushal,
    You can use a XLST transformation to convert from UTF-16 to UTF-8.
    The coding goes something like this:
    XmlReader xmlRdr = XmlReader.Create(new StringReader(sXML));
    XmlWriterSettings xmlWtrSettings = new XmlWriterSettings();
    xmlWtrSettings.Encoding = Encoding.Unicode;
    XmlWriter xmlWtr = XmlWriter.Create(sOutFile, xmlWtrSettings);
    XslCompiledTransform xslt = new XslCompiledTransform();
    xslt.Load(sTransformFile);
    xslt.Transform(xmlRdr, xmlWtr);
    xmlWtr.Flush();
    xmlWtr.Close();
    xmlRdr.Close();
    Where sXML is the XML string generated by the SBO GetAsXML method, sOutFile is the path and filename where the transformed XML will be created and sTransformFile is the path of the XLST file.
    Assuming that you wish to retain the same XML structure as before, the XLST file should look something like the following:
    <?xml version="1.0" encoding="utf-8"?>
    <xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform">
    <xsl:template match="/">
         <BOM>
              <xsl:for-each select="BOM/BO">
              <BO>
                   <AdmInfo>
                        <Object>
                             <xsl:value-of select="AdmInfo/Object"/>
                        </Object>
                   </AdmInfo>
                   <ORDR>
                        <xsl:for-each select="ORDR/row">
                        <row>
                             <DocEntry>
                                  <xsl:value-of select="DocEntry"/>
                             </DocEntry>
                             <DocNum>
                                  <xsl:value-of select="DocNum"/>
                             </DocNum>
                             <DocDate>
                                  <xsl:value-of select="DocDate"/>
                             </DocDate>
                             <DocDueDate>
                                  <xsl:value-of select="DocDueDate"/>
                             </DocDueDate>
                             <DocStatus>
                                  <xsl:value-of select="DocStatus"/>
                             </DocStatus>
                             <Cancelled>
                                  <xsl:value-of select="CANCELED"/>
                             </Cancelled>
                             <CardCode>
                                  <xsl:value-of select="CardCode"/>
                             </CardCode>
                             <CardName>
                                  <xsl:value-of select="CardName"/>
                             </CardName>
                             <NumAtCard>
                                  <xsl:value-of select="NumAtCard"/>
                             </NumAtCard>
                        </row>
                        </xsl:for-each>
                   </ORDR>
                   <RDR1>
                        <xsl:for-each select="RDR1/row">
                        <xsl:sort select="LineNum" />
                        <row>
                             <LineNum>
                                  <xsl:value-of select="LineNum"/>
                             </LineNum>
                             <ItemCode>
                                  <xsl:value-of select="ItemCode"/>
                             </ItemCode>
                             <Dscription>
                                  <xsl:value-of select="Dscription"/>
                             </Dscription>
                             <Quantity>
                                  <xsl:value-of select="Quantity"/>
                             </Quantity>
                             <WhsCode>
                                  <xsl:value-of select="WhsCode"/>
                             </WhsCode>
                             <BaseType>
                                  <xsl:value-of select="BaseType"/>
                             </BaseType>
                             <BaseEntry>
                                  <xsl:value-of select="BaseEntry"/>
                             </BaseEntry>
                             <BaseLine>
                                  <xsl:value-of select="BaseLine"/>
                             </BaseLine>
                             <FreeTxt>
                                  <xsl:value-of select="FreeTxt"/>
                             </FreeTxt>
                        </row>
                        </xsl:for-each>
                   </RDR1>
              </BO>
              </xsl:for-each>
         </BOM>
    </xsl:template>
    </xsl:stylesheet>
    The above example shows a XLST transform for the sales order document type. This example is for use with the xet_ValidNodesOnly setting for the XmlExportType company property. If you are using a different XmlExportType setting then the XLST will be slightly different but the principal is the same. For simplicity, I have shown only a cut-down list of the fields from the sales order but other fields and tables can be included (assuming that they are in the original XML from SBO).
    Kind Regards,
    Owen
    P.S. Sorry for the lack of indentation on the XML file. It was there when I created this post but the forum removes the indentation.

Maybe you are looking for