7.1.5 update renders another program useless! HELP!
After the update installed, I'm unable to open Full Tilt poker. Checked the forums there and everyone who got the update is having the same problem. I even trashed the poker program and downloaded again. No dice. Something in the quicktime update is buggy. No one seem to have a fix yet. Can anyone help me? I go crazy if I can't play poker online every night!
Here is a email directly from Full Tilt.
Thank you for contacting Full Tilt Poker Support.
There is an issue with the latest Quicktime 7.1.5 update that is
affecting many programs, not just Full Tilt Poker. From what we have
found out so far, it is only affecting PowerPC users using OSX 10.3.x
Our Mac development department is still investigating the issue, but we
do not have a timeline on when a fix will be available, as it is not a
change in the Full Tilt Poker software that is causing this issue.
Please remain patient, we hope to offer you and the others affected a
solution quickly.
We appreciate your business. If there's anything else we can assist you
with, please let us know.
Regards,
Mat
Technical Representative
Full Tilt Poker Support
Similar Messages
-
Shuffle icon from most recent update rendered next to useless !!
I love my 64g touch very much. I do construction work & it is vital to the work day. Well since the most recent update which i downloaded & installed like 2 weeks ago the "shuffle" icon is a choice between either shuffle or repeat 1 song over & over for eternity. Before the it was a choice between loop album (?)(which is what i need to get again), loop 1 song, or shuffle. Before this most recent update i was able to click a very small icon that sat above the displayed album cover & set "shuffle" to my liking by clicking the icon, NOW I CANNOT !! Now i get 1 of 2 settings, either the repeat 1 song for eternity setting (which has got to be the most useless setting ever) or the completely random shuffle of which i have no control or desire to use. I SIMPLY WANT TO LOOP THE ENTIRE ALBUM THAT I AM LISTENING TO LIKE I USED TO BE ABLE TO DO JUST 2 WEEKS AGO (but then my 2 year old son messed with my ipod & i lost the setting that i liked))!!
Please help !! Thank youOk, just to help anyone else who might face tis situation:
I was wrong!! The blue or white loop selection icon is still there. Take your iPod & hold it so the longer side is standing up vertically, get it so that you can see an album cover while a song is playing, underneath the second counter on the left side of the screen there will be a loop (either white or blue), tap it. This will give you one of 3 settings, here are there descriptions:
Full Blue Loop: Continuous loop of current album or playlist
Full Blue Loop with a small 1: Loop 1 song
White Loop: Loop is now off.
I hope this helps someone out there !! I broke down & went to the apple store & got help, i couldnt find the answer here (or so i thought lol!!). -
Any fixes? iPhone 6 plus 8.3 update rendered this phone useless
purchased 4 of these iPhone 6 plus models 2 weeks ago Tmobile user. Hate hate hate them. Installed the latest updates and now calls get dropped and the LTE network that was slow to begin with is so slow that infound myself borrowing a friends phone just to geg directions and had to write them down! Making this device useless I'm paying close to 4 grand for 4 fancy pieces of plastic which work as well as my kids toy phone. Useless useless useless. So mad. ( Also wifi although it states it is on at the top of my iphone yet when using it for maps or internet search states that I do not have a connection to the server. I even went as far as to call my provider YES it's working fine on all my other wifi equipment in the house ). I turned phone on off turned wito on off I reset data connection per T-Mobile cusy service. Nope still not working. trouble shooting this B.S. Is a full time job which I am not getting credit for nor am I getting paid to do. I want my money back! keypad ***** in recognizing what I want to type. It constantly changes my text and find myself spending extra time in having to edit my posts texts. I wind up sending stuff knowing there is error simply because I don't have time to fix the blessed errors.
tried reinstalling 8.0 but itunes is telling me that my firmaware is not even compatible
-
IMovie and iPhoto updates require another Apple ID: Help?
I recently updated to Maverick, and iMovie and iPhoto required an Apple ID login to update. However, after entering my Apple ID, it then asked for an Apple ID of a user who used to have an account on my Macbook, but it has since been deleted. The Apple ID box is grayed out, so only the other Apple ID will work, and so I can't update with my own ID. I have tried logging out and back in again, but it doesn't change it. Help please???
Try reindexing the HDD;
Spotlight: How to re-index folders or volumes -
http://support.apple.com/kb/ht2409 -
How to read data from a file that is already open by another program
Hey..
I have made IV, where I'm trying to read data from a log file, that is being updated by another program while my IV runs.
To be clear, this program writes data continuously to this file and I want to read from the file in LV at the same time.
The problem is that LV reports an error when I'm trying to read the log file, even if I use to "read only" mode.
I believe that the program that is producing the file, have some kind of lock on the file. I have tryed to copy the file and then reading from the copied file, but LV throws already an error when I try to copy the file.
Has anyone tryed this, and found a solution.?
Additional info: The program that produces the file is STM Studio
Best Regards
AllanHi Alha,
when that file is locked by the other program you can't do anything about that - apart from quitting that other program. Probably this isn't an option to you…
Best regards,
GerdW
CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
Kudos are welcome -
I have updated my iMac ot osx 10.9.1 but my screen no longer shows my finder bar unless I activate another program like mail or safari. also I can't access photos stored on my portable hard drive that was used before the update. Should I unsubscribe my update?
JenniferDid you make a backup of your system before you replaced the operating system?
-
Photo shop elements make a nice slide show but will not let me burn it to DVD which makes it useless to me.
How do I get the photoshop slide show to burn in another program.?Thanks so much for your possible solution. If I can pull this off , I will no longer curse adobe PSE 13.
I'm still a long was off to accomplish this goal but I will surely give it a try. H264 (mp4) is still Greek to me. -
I can not get my IPAD to update the latest software the update says it is unavailable at this time try later I have been trying for 5 hours any suggestions as this renders my IPAD useless
If you have an iPad 1, the max iOS is 5.1.1. For newer iPads, the current iOS is 7.0.4. The Settings>General>Software Update only appears if you have iOS 5.0 or higher currently installed.
You can no longer update to iOS 6.x, or down grade the iOS.
iOS 5: Updating your device to iOS 5 or Later
http://support.apple.com/kb/HT4972
How to install iOS 6
http://www.macworld.com/article/2010061/hands-on-with-ios-6-installation.html
iOS: How to update your iPhone, iPad, or iPod touch
http://support.apple.com/kb/HT4623
If you are currently running an iOS lower than 5.0, connect the iPad to the computer, open iTunes. Then select the iPad under the Devices heading on the left, click on the Summary tab and then click on Check for Update.
Tip - If connected to your computer, you may need to disable your firewall and antivirus software temporarily. Then download and install the iOS update. Be sure and backup your iPad before the iOS update. After you update an iPad (except iPad 1) to iOS 6.x, the next update can be installed via wifi (i.e., not connected to your computer).
Tip 2 - If you're updating via wifi, place your iPad close to your router to preclude getting a corrupted download.
How to Upgrade to iOS 7
The iOS 7.0 update requires around 2.5 GB of storage space, so if your iPad is almost full, you may need to clear up some space. You can check your available space in Settings -> General -> Usage.
There are two ways to upgrade to iOS 7: You can use your Wi-Fi connection, or you can connect your iPad to your PC and update through iTunes. We'll go over each method.
To upgrade using Wi-Fi:
Note: If your iPad's battery is under 50%, you will want to plug it into your charger while performing the update.
Go into the iPad's Settings.
Locate and tap "General" from the menu on the left.
The second option from the top is "Software Update". Tap this to move into the update settings.
Tap "Download and Install". This will start the upgrade, which will take several minutes and will reboot your iPad during the process. If the Download and Install button is grayed out, trying clearing up some space. The space required by the update is mostly temporary, so you should gain most of it back after iOS 7 is installed.
Once the update is installed, you may have to run through the initial steps of setting up your iPad again. This is to account for new features and settings.
To upgrade using iTunes:
First, connect your iPad to your PC or Mac using the cable provided when you purchased your device. This will allow iTunes to communicate with your iPad.
You will also need the latest version of iTunes. Don't worry, you will be prompted to download the latest version when you launch iTunes. Once it installs, you may be asked to setup iCloud by logging into your iTunes account. If you have a Mac, you may be prompted on whether or not you want to enable the Find my Mac feature.
Now you are ready to begin the process:
If you upgraded iTunes earlier, go ahead and launch it. (For many, it will launch automatically when you plug in your iPad.)
Once iTunes is launched, it should automatically detect that a new version of the operating system exists and prompt you to upgrade to it. Choose Cancel. Before updating, you will want to manually sync your iPad to make sure everything is up to date.
After canceling the dialog box, iTunes should automatically sync with your iPad.
If iTunes doesn't automatically sync, you can manually do it by selecting your iPad within iTunes, clicking on the File menu and choosing Sync iPad from the list.
After your iPad has been synced to iTunes, select your iPad within iTunes. You can find it on the left side menu under Devices.
From the iPad screen, click on the Update button.
After verifying that you want to update your iPad, the process will begin. It takes a few minutes to update the operating system during which time your iPad may reboot a few times.
After updating, you may be asked a few questions when your device finally boots back up. This is to account for new settings and features.
Cheers, Tom -
Hi, Have updated iphone from 4.3 and had to do a restore which has now rendered my phone useless as it say the sim is not valid. I am in Colombia and this is very frustrating as I cannot just pop to the apple store here. Please Help...
Sounds like you have a phone that was hacked to unlock it. Updating has re-locked it to the original carrier. ONLY the carrier it is locked to can authorize unlocking it. Contact them.
-
Why am I not informed that another program will be downloaded with Adobe update
why an I not informed that Adobe update will install another program with in,such as McAfee.. I don't want programs that i don't choose myself
oh, you may be right.
when you go to the flash player web page, Adobe - Install Adobe Flash Player you'll see the mcafee option. but if you allow auto-updates, you may not see that.
i never allow flash player to auto-update for that reason (and because i am a flash developer and use a different flash player version to debug web-based swfs). you have limited (or no) control over what happens when you allow flash player to auto-update.
i hate that and sympathize with the plight you went through. it happened to me once many years ago. i learned to never allow that again.
hopefully, you were able to uninstall mcafee and not have any residual problem-causing detritus left on your system. -
I am using the latest Firefox (28.0) on Windows XP in a shared computer environment. Although I do not have Administrator access, I installed Firefox myself and can change whatever Firefox config settings I want (including about:config and mucking with the files in the installation directory).
I want to disable the tab that appears on Firefox startup, "Another program on your computer would like to modify Firefox with the following add-on". This tab usually appears once per day (the first time I startup Firefox each day). I want the tab not to appear at all, from now on.
The "another program" in question is some program that is used in the facility where I'm using the computer, so I can't just uninstall that program. Although this is a shared computer environment, they don't "wipe" the machine every day, just reboot. So the Firefox I installed is still there with all my config settings intact. As far as I know, I'm the only person who uses Firefox on this computer.
Solutions that don't work:
"Just click Continue" -- but then I still see the "Another program" tab every day, and don't want to see it.
"Click Remove in the Add-ons list" -- I removed the Add-on in question but the tab still appears every day.
I would like a solution that either eliminates the Add-on request for that particular application, or eliminates all such requests ("Another program...") regardless of what application requested it. The ideal solution would be if the request itself had a checkbox for "never ask this again" but, alas, no such luck.Gosh... I spent about an hour preparing a response, then accidentally did control-something or alt-something which took me back a page and I lost everything I typed (even after I clicked Forward to try to get back to where I was). If anyone knows of a config setting like "don't ever trash an entire page of user input unless the user explicitly confirms it", or, "keep form input data even if the user goes Back or Forward", I think that would be a great feature.
OK, back to the original question...
I appreciate the responses thus far, but I think there have been some misunderstandings. Maybe a multiple-choice version would help:
Question: Is there a way to suppress the appearance of the notification tab that says, "Another program on your computer would like to modify Firefox with the following add-on" (meaning, any request from another program to install an add-on is to be silently ignored and discarded)?
Answer:
(A) Yes, you can suppress that notification (please state how).
(B) No, but you can request that feature (please state where).
(C) No, you can't do that or request that feature.
That's basically my question in a nutshell. If the answer is (B), I might envision a boolean about:config setting like "extensions.allowProgrammaticAddonRequests" that defaults to "true" and can be set to "false" manually. I think that would be the most direct solution (if it were possible).
I will respond to some comments from above:
"I don't understand why you are using a mozilla.cfg file to lock those preferences when you can modify the preferences for your current Firefox profile via about:config" -- This is because the "other program" in question (iCafe Manager) was setting certain config options (browser.startup.homepage, and browser.newtab.url) on every reboot (which happens every morning at that facility). I got tired of manually changing the settings back every day. Using the above-mentioned files, I successfully defeated iCafe Manager's daily interference with those config settings. The other things (like stuff related to Socks tunnelling) I probably could have just set once in about:config but doing a lockPref seemed to do no harm. The settings for "enabledScopes" and "xpinstall" were to see if they'd help with the problem I originally asked about, but they did not.
"I would look in about:config to make sure those preference modifications are in effect" -- yes, I confirmed that the settings are in effect and locked. That much works as expected.
"A) removing the iCafe Toolbar extension from the Firefox Addons -> Extensions panel results in the "Another program" tab at startup" -- true, but I think it would be more accurate to say: while the toolbar extension is not installed (due to either having been removed, or, never having been installed at all), the "Another program" tab appears on at least the first startup of Firefox after every reboot.
"B) when you allow the installation it shows up as "(disabled)" in the Extensions list but the unwanted toolbar still shows up (correct?)" -- yes, correct.
"You could explain the problem to the system administrator of your facility" -- unfortunately, there's no administrator on site, only a person who makes sure the lights are on. They'll call a tech if there's a catastrophic problem (like the net connection goes dead). Since I installed Firefox myself, and since iCafe Manager is a program they installed, I don't think they'll go out of their way to help me with Firefox (especially if I'm trying to defeat iCafe Manager's attempts to interfere with Firefox). From their point of view, their systems are working just fine.
"allow the installation and then see if you can go to the Firefox Customize menu and HIDE the toolbar as a workaround" -- since I'm not in that facility now (and probably won't be again until this summer or so), I can't experiment with those systems now. But I do recall clicking just about everything I could, including "View - Toolbars" (which seems to be the same menu as when I right-click on a toolbar line). That menu allows hiding toolbars, but from my recollection, the offending toolbar was not displayed in the list, so I could not hide it that way. Also, the Customize menu ("View - Toolbars - Customize") seems to allow only modifications to a toolbar, and not a way to hide an entire toolbar.
"it might help if you could post a new troubleshooting information list after you allow the iCafe Toolbar installation" -- ok, that troubleshooting report is included below.
Thanks again for your help.
Application Basics
Name: Firefox
Version: 28.0
User Agent: Mozilla/5.0 (Windows NT 5.1; rv:28.0) Gecko/20100101 Firefox/28.0
Crash Reports for the Last 3 Days
All Crash Reports
Extensions
Name: iCafe Manager Toolbar
Version: 5.2.0.6
Enabled: false
ID: {C058FE28-1E07-4FD1-8092-046F8A964D12}
Important Modified Preferences
accessibility.typeaheadfind.flashBar: 0
browser.cache.disk.capacity: 358400
browser.cache.disk.smart_size.first_run: false
browser.cache.disk.smart_size.use_old_max: false
browser.cache.disk.smart_size_cached_value: 358400
browser.newtab.url: about:blank
browser.places.smartBookmarksVersion: 6
browser.sessionstore.upgradeBackup.latestBuildID: 20140314220517
browser.startup.homepage: http://www.google.com/ncr
browser.startup.homepage_override.buildID: 20140314220517
browser.startup.homepage_override.mstone: 28.0
dom.mozApps.used: true
extensions.lastAppVersion: 28.0
gfx.blacklist.direct2d: 3
gfx.blacklist.layers.direct3d10: 3
gfx.blacklist.layers.direct3d10-1: 3
gfx.blacklist.layers.direct3d9: 3
gfx.blacklist.layers.opengl: 3
gfx.blacklist.stagefright: 3
gfx.blacklist.suggested-driver-version: 6.1400.1000.5218
gfx.blacklist.webgl.angle: 3
gfx.blacklist.webgl.msaa: 3
gfx.blacklist.webgl.opengl: 3
network.cookie.prefsMigrated: true
network.websocket.enabled: false
places.database.lastMaintenance: 1398414928
places.history.enabled: false
places.history.expiration.transient_current_max_pages: 53428
plugin.disable_full_page_plugin_for_types: application/pdf
plugin.importedState: true
plugin.state.npgoogleupdate: 1
privacy.sanitize.migrateFx3Prefs: true
privacy.sanitize.sanitizeOnShutdown: true
storage.vacuum.last.index: 1
storage.vacuum.last.places.sqlite: 1396778909
Graphics
Adapter Description: Intel(R) G33/G31 Express Chipset Family
Adapter Drivers: igxprd32
Adapter RAM: Unknown
Device ID: 0x29c2
Direct2D Enabled: Blocked for your graphics driver version. Try updating your graphics driver to version 6.1400.1000.5218 or newer.
DirectWrite Enabled: false (0.0.0.0)
Driver Date: 11-3-2008
Driver Version: 6.14.10.5009
GPU #2 Active: false
GPU Accelerated Windows: 0/1 Basic Blocked for your graphics driver version. Try updating your graphics driver to version 6.1400.1000.5218 or newer.
WebGL Renderer: Blocked for your graphics driver version. Try updating your graphics driver to version 6.1400.1000.5218 or newer.
Vendor ID: 0x8086
windowLayerManagerRemote: false
AzureCanvasBackend: skia
AzureContentBackend: cairo
AzureFallbackCanvasBackend: cairo
AzureSkiaAccelerated: 0
JavaScript
Incremental GC: true
Accessibility
Activated: false
Prevent Accessibility: 0
Library Versions
NSPR
Expected minimum version: 4.10.3
Version in use: 4.10.3
NSS
Expected minimum version: 3.15.5 Basic ECC
Version in use: 3.15.5 Basic ECC
NSSSMIME
Expected minimum version: 3.15.5 Basic ECC
Version in use: 3.15.5 Basic ECC
NSSSSL
Expected minimum version: 3.15.5 Basic ECC
Version in use: 3.15.5 Basic ECC
NSSUTIL
Expected minimum version: 3.15.5
Version in use: 3.15.5 -
I have a user on an iMac 10.6 connected to our domain. She uses Outlook web access for email on our exchange server. Last week she received the following message which is randomly preventing her from sending emails. She claims no attachment was involved in the original email when this all started. I have not been able to look at her account as she is out of the office but maybe someone else dealt with this issue. I realize this may not be Mac related but thought I'd give it a try. She did say it occurred once over two days while working on a PC but it continued over the past weekend.
If an internal user tries to send a message with infected attachment using Outlook Web Access, it may report the following error message: The action could not be completed because of a conflict with the original item. The conflict may have occurred when an existing item was updated on another computer or device. Open the item again and try making your changes. If the problem continues, contact technical support for your organization.
This is because F-Secure Anti-Virus for Microsoft Exchange has detected a virus in the attachment. If the user tries to send the message again, the message will be sent but without the attachment. At the same time a blank message with an attachment named "Attachment_information.txt" will remain in the user's Drafts folder. The "Attachment_information.txt" will contain information about the virus detected in the message.PS - have found other posts indicating that clips smaller than 2s or sometimes 5s, or "short files" can cause this. Modern style editing often uses short takes ! Good grief I cannot believe Apple. Well I deleted a half a dozen short sections and can export, but now of course the video is a ruined piiece of junk and I need to re-do the whole thing, the sound etc. which is basically taking as much time as the original. And each time I re-do it I risk again this lovely error -50 and again trying to figure out what thing bugs it via trial and error instead of a REASONABLE ERROR MESSAGE POINTING TO THE CLIP IT CAN'T PROCESS. What a mess. I HATE this iMovie application - full of BUGS BUGS BUGS which Apple will not fix obviously, since I had this product for a few years and see just hundreds of hits on Google about this error with disappointed users. Such junk I cannot believe I paid money for it and Apple does not support it with fixes !!!
If anyone knows of a GOOD reasonably priced video editing program NOT from APPLE I am still looking for suggestions. I want to do more video in future, but obviously NOT with iMovie !!! -
When I quit Photoshop CS6, the following message appears:
" Could not save Preferences because the file is locked, you do not have necessary access permissions, or another program is using the file. Use the ‘Get Info’ command in the Finder to ensure the file is unlocked and you have permission to access the file. If the problem persists, save the document to a different file or duplicate it in the Finder."
If I try to change the Workspace in PS6 from Essentials to any other Workspace, the following messsage appears:
"Could not apply the workspace because the file is locked, you do not have necessary access permissions, or another program is using the file. Use the ‘Get Info’ command in the Finder to ensure the file is unlocked and you have permission to access the file. If the problem persists, save the document to a different file or duplicate it in the Finder."
I have checked the Sharing and Permissions section of the "Get Info" panel accessed from the Finder and I have set Read and Write Privileges for my user account for Photoshop CS6. System and Admin are also set to Read and Write.
I have a MacBook Pro with OS X Version 10.9.5 and have all available updates for Photoshop CS6, Lightroom 5 and Bridge CS6.
I tried uninstalling the program and downloading it again and reinstalling, but nothing changed.
Can you help?
Thanks,
cjpnmYou may get better help in Photoshop General Discussion
The Cloud forum is not about using individual programs
The Cloud forum is about the Cloud as a delivery & install process
If you will start at the Forums Index https://forums.adobe.com/welcome
You will be able to select a forum for the specific Adobe product(s) you use
Click the "down arrow" symbol on the right (where it says All communities) to open the drop down list and scroll
If FINDER means Mac, read below (and try to give more information when asking a question)
Mac 10.9.3 workaround https://forums.adobe.com/thread/1489922
Enable Mac Root User https://forums.adobe.com/thread/1156604
-more Root User http://forums.adobe.com/thread/879931
-and more root user http://forums.adobe.com/thread/940869?tstart=0 -
Importing internal table from one program to another program
Hi everybody,
i have one small doubt.
i am using submit statement and passing the values from this program to another program selection screen. in that program logic is written.In that program one internal table values are being exported to the memory id of that program. now i have to import that internal table values into my program by using import statement. i am using the following syntax
import itab from menory id 'program name'.
but i am getting an error saying program name is unknown.
what is the exat syntax for this .
thanking you,
giri.hi,
check these statements.
IMPORT - Get data
Variants:
1. IMPORT obj1 ... objn FROM DATA BUFFER f.
2. IMPORT obj1 ... objn FROM INTERNAL TABLE itab.
2. IMPORT obj1 ... objn FROM MEMORY.
3. IMPORT obj1 ... objn FROM SHARED MEMORY itab(ar) ID key.
4. IMPORT obj1 ... objn FROM SHARED BUFFER itab(ar) ID key.
5. IMPORT obj1 ... objn FROM DATABASE dbtab(ar) ID key.
6. IMPORT obj1 ... objn FROM DATASET dsn(ar) ID key.
7. IMPORT obj1 ... objn FROM LOGFILE ID key.
8. IMPORT DIRECTORY INTO itab FROM DATABASE dbtab(ar) ID key.
9. IMPORT (itab) FROM ... .
In some cases, the syntax rules that apply to Unicode programs are different than those for non-Unicode programs. For more details, see Storing Cluster Tables.
Variant 1
IMPORT obj1 ... objn FROM DATA BUFFER f.
Extras:
1. ... = f (for each object to be imported)
2. ... TO f (for each object to be imported)
3. ... ACCEPTING PADDING
4. ... ACCEPTING TRUNCATION
5. ... IGNORING STRUCTURE BOUNDARIES
6. ... IGNORING CONVERSION ERRORS
7. ... REPLACEMENT CHARACTER c
8. ... IN CHAR-TO-HEX MODE
9. ... CODE PAGE INTO f1
10. ... ENDIAN INTO f2
The syntax check performed in an ABAP Objects context is stricter than in other ABAP areas.
See You Cannot Use Implicit Field Names in Clusters.
Effect
Imports the data objects obj1 ... objn from the data buffer declared. The data buffer must be of type XSTRING . The data objects obj1 ... objn can be fields, structures, complex structures, or tables. The system imports all the data that has been stored in the data buffer f using the EXPORT ... TO DATA BUFFER statement and is listed here. It also checks that the structure used in the IMPORT statement matches the one in the EXPORT statement.
The Return Code is set as follows:
SY-SUBRC = 0:
The existing data objects in the data cluster specified were imported. The rest remain unchanged. (In some circumstances, this may mean that no data objects were imported).
SY-SUBRC = 4:
The data objects could not be imported. The contents of all the objects remain unchanged.
Addition 1
... = f (for each object to be imported)
Addition 2
... TO f (for each object to be imported)
Effect
The object is stored in the field f.
Addition 3
... ACCEPTING PADDING
Effect
This addition allows you to append new fields to the end
of structures, sub-structures, and internal tables. The IMPORT statement fills the additional fields with initial values; make existing fields (C, N, X, P, I1, and I2) longer; map character-type fields to STRING-type fields; or to map byte-type fields to XSTRING-type fields.
Addition 4
... ACCEPTING TRUNCATION
Effect
This addition allows you to shorten the last CHAR
fields, or to omit the last component at the top level. (Until Release 4.6, you could do this without using an addition).
Addition 5
... IGNORING STRUCTURE BOUNDARIES
Effect
This addition means that only the fragment sequence is
relevant - that is, that any sub-structures match. If you use this addition, the system ignores any alignment changes necessitated by Unicode - such as inserting named includes.
You cannot use this addition with either addition 3 (enlarge structure) or addition 4 (shorten structure), since it specifies that structure and include boundaries are to be ignored.
From Release 6.10 onwards, the include information is stored in datasets, so that the system can also check that includes match - that is, that sub-structures and includes (named or unnamed) are treated equally. When data is imported in a Release prior to 6.10, includes are not checked.
Addition 6
...IGNORING CONVERSION ERRORS
Effect
This addition prevents the system from triggering a
runtime error, if an error occurs when the character set is converted. '#' is used as a replacement character.
Addition 7
... REPLACEMENT CHARACTER c
Effect
The replacement character is used if a particular
character cannot be converted when the character set is converted.
This addition can only be used in conjunction with addition 6.
Addition 8
... IN CHAR-TO-HEX MODE
Effect
Not all character-type fields are converted. To convert
a field, you must create a field (or structure) that is identical to the exported field or structure, except that all its character-type components must be replaced with hexadecimal fields.
You can only use this addition in Unicode programs, to allow you to import camouflaged binary data as single-byte characters.
Moreover, you cannot use this addition in conjunction with the additions 3, 4, 5, 6, or 7.
Addition 9
... CODE PAGE INTO f1
Effect
The code page of the exported data is stored in the
character-type field f1 - for example, to analyze data that has been imported with the IN CHAR-TO-HEX MODE addition.
Addition 10
... ENDIAN INTO f2
Effect
The byte order (LITTLE or BIG) of the
exported data is stored in the field f2 - for example, to analyze data that has been imported with the IN CHAR-TO-HEX MODE addition. The field f2 must have the type ABAP_ENDIAN, which is defined in the type group ABAP. For this reason, the type group ABAP must be included in the ABAP program using a TYPE-POOLS statement.
Variant 2
IMPORT obj1 ... objn FROM INTERNAL TABLE itab.
Extras:
1. ... = f (for each object to be imported)
2. ... TO f (for each object to be imported)
3. ... ACCEPTING PADDING
4. ... ACCEPTING TRUNCATION
5. ... IGNORING STRUCTURE BOUNDARIES
6. ... IGNORING CONVERSION ERRORS
7. ... REPLACEMENT CHARACTER c
8. ... IN CHAR-TO-HEX MODE
9. ... CODE PAGE INTO f1
10. ... ENDIAN INTO f2
The syntax check performed in an ABAP Objects context is stricter than in other ABAP areas. See No implicit field names in cluster.
Effect
Imports the data objects obj1 ... objn (fields, structures, complex structures, or tables) from the specified internal table itab. The first column in the internal table must be of the predefined type INT2 and the second must be type X. To define the first column you must refer to a data element in the ABAP Dictionary that has the predefined type INT2.
All data that was stored in the internal table itab using EXPORT ... TO INTERNAL TABLE and listed, is imported. The system checks that the EXPORT and IMPORT structures match.
The Return Code is set as follows:
SY-SUBRC = 0:
The existing data objects in the specified data cluster were imported, the rest remain unchanged (it is possible that no data object was imported).
SY-SUBRC = 4:
The data objects could not be imported.
The contents of all listed objects remain unchanged
Addition 1
... = f (for each object to be imported)
Addition 2
... TO f (for each object to be imported)
Effect
Places the object in the field f.
Addition 3
... ACCEPTING PADDING
Effect
This addition allows you to add new fields to the ends
of structures, even to substructures and internal tables (the additional fields are filled with initial value during the IMPORT). It also allows you to increase the size of existing fields (C, N, X, P, I1, and I2) and to map Char fields to STRING type fields or byte fields to XSTRING type fields.
Addition 4
... ACCEPTING TRUNCATION
Effect
This addition allows you to shorten the last CHAR
field or omit the last component on the highest level (till Release 4.6 this was possible without specifying an addition).
Addition 5
... IGNORING STRUCTURE BOUNDARIES
Effect
This addition means that only the page order is
relevant, that is any substructures match. With this addition, the system also ignores alignment changes arising from the Unicode conversion (for example, due to subsequent insertion of named includes).
This addition rules out any subsequent structural enhancements (addition 3) or structural shortening (addition 4) because with this addition it is the structural limits and include limits that are to be ignored.
As from Release 6.10, the include information will also be stored in the dataset, so that it is possible to also check whether the includes match, that is substructures and includes (named or unnamed) are treated the same. When importing data that was exported in a Release lower than 6.10, the includes are not checked.
Addition 6
...IGNORING CONVERSION ERRORS
Effect
This addition has the effect that an error in the
character set conversion does not cause a runtime error. The system uses "#" as a replacement character.
Addition 7
... REPLACEMENT CHARACTER c
Effect
The system uses the specified replacement character if a
character cannot be converted during a character set conversion. If this addition is not specified, the system uses "#" as a replacement character.
This addition can only be used in conjunction with addition 6.
Addition 8
... IN CHAR-TO-HEX MODE
Effect
No character type fields are converted. For this you
must create a field or structure that is identical to the exported field or exported structure, except that all character type fields must be replaced with hexadecimal fields.
This addition, which is only allowed in programs with a set Unicode flag, allows you to import binary data disguised as single byte characters. This addition cannot be used in conjunction with additions 3, 4, 5, 6, and 7.
Addition 9
... CODE PAGE INTO f1
Effect
The codepage of the exported data is stored in the
character-type field f1 (for example, to be able to analyze the data imported with the addition IN CHAR-TO-HEX MODE).
Addition 10
... ENDIAN INTO f2
Effect
The byte order (LITTLE or BIG) of the
exported data is stored in the field f2 (for example, to be able analyze the data imported using the addition IN CHAR-TO-HEX MODE). The field f2 must be of type ABAP_ENDIAN, defined in type group ABAP. You must therefore include the type group ABAP in the ABAP program with a TYPE-POOLS statement.
Variant 3
IMPORT obj1 ... objn FROM MEMORY.
Extras:
1. ... = f (for each object to be imported) 2. ... TO f (for each object to be imported)
3. ... ID key
4. ... ACCEPTING PADDING
5. ... ACCEPTING TRUNCATION
6. ... IGNORING STRUCTURE BOUNDARIES
The syntax check performed in an ABAP Objects context is stricter than in other ABAP areas. See You Must Enter Identification and Cannot Use Implicit Field Names inClusters
Effect
Imports data objects obj1 ... objn (fields, structures, complex structures or tables) from a data cluster in the ABAP memory (see EXPORT). Reads in all data without an ID that was exported to memory with "EXPORT ... TO MEMORY.". In contrast to the variant IMPORT FROM DATABASE, it does not check that the structure matches in EXPORT and IMPORT.
The Return Code is set as follows:
SY-SUBRC = 0:
The existing data objects in the data cluster specified were imported. The rest remain unchanged (in some circumstances, this may mean that no data objects were imported).
SY-SUBRC = 4:
The data objects could not be imported, probably because the ABAP memory was empty.
The contents of all objects remain unchanged.
Note
You should always use the addition 3 (... ID key) with the statement. Otherwise, the effect of the variant is not certain (EXPORT statements in different parts of a program overwrite each other in the ABAP memory), since it exists only for reasons of compatibility with R/2.
Additional methods for selecting and deleting data clusters in the ABAP memory are provided by the system class CL_ABAP_EXPIMP_MEM.
Please consult Data Area and Modularization Unit Organization documentation as well.
Addition 1
... = f (for each object to be imported)
Addition 2
... TO f (for each object to be imported)
Effect
The object is placed in field f.
Addition 3
... ID key
Effect
Imports only data stored in ABAP memory under the ID key.
Notes
The key, key, must be a character-type data object (but not a string).
The Return Code is set as follows:
SY-SUBRC = 0:
The existing data objects in the data cluster specified were imported. The rest remain unchanged (in some circumstances, this may mean that no data objects were imported).
SY-SUBRC = 4:
The data objects could not be imported, probably because an incorrect ID was used.
The contents of all objects remain unchanged.
Addition 4
... ACCEPTING PADDING
Effect
This addition allows you to append new fields to the end of structures, sub-structures, and internal tables. The IMPORT statement fills the additional fields with initial values; make existing fields (C, N, X, P, I1, and I2) longer; map character-type fields to STRING-type fields; or to map byte-type fields to XSTRING-type fields.
Addition 5
... ACCEPTING TRUNCATION
Effect
This addition allows you to shorten the last CHAR field, or to omit the last component at the top level. (Until Release 4.6, you could do this without using an addition).
Addition 6
... IGNORING STRUCTURE BOUNDARIES
Effect
This addition means that only the fragment sequence is relevant - that is, that any sub-structures match. If you use this addition, the system ignores any alignment changes necessitated by Unicode - such as inserting named includes.
You cannot use this addition with either addition 3 (enlarge structure) or addition 4 (shorten structure), since it specifies that structure and include boundaries are to be ignored.
From Release 6.10 onwards, the include information is stored in datasets, so that the system can also check that includes match - that is, that sub-structures and includes (named or unnamed) are treated equally. When data is imported in a Release prior to 6.10, includes are not checked.
Related
EXPORT TO MEMORY, DELETE FROM MEMORY, FREE MEMORY
Variant 4
IMPORT obj1 ... objn FROM SHARED MEMORY itab(ar) ID key.
Extras:
1. ... = f (for each object to be exported) 2. ... TO f (for each object to be exported)
3. ... CLIENT g (before ID key)
4. ... TO wa (after itab(ar) or ID key )
5. ... ACCEPTING PADDING
6. ... ACCEPTING TRUNCATION
7. ... IGNORING STRUCTURE BOUNDARIES
The syntax check performed in an ABAP Objects context is stricter than in other ABAP areas.
See You Cannot Use Implicit Field Names in Clusters and You Cannot Use Table Work Areas.
Effect
Imports the data objects obj1 ... objn (fields, structures, complex structures, or tables) from shared memory. The data objects are read using the ID key from the area ar in the table itab - c.f. EXPORT TO SHARED MEMORY). You must use itab to specify a database table although the system reads from a memory table with the appropriate structure.
The Return Code is set as follows:
SY-SUBRC = 0:
The existing data objects in the data cluster specified were imported. The rest remain unchanged. (In some circumstances, this may mean that no data objects were imported).
SY-SUBRC = 4:
The data objects could not be imported. You may have used the wrong ID. The contents of all the objects remain unchanged.
Notes
The table dbtab named according to SHARED MEMORY must be declared using TABLES (except in addition 2).
The structure of fields (field symbols and internal tables) to be imported must match the structure of the objects exported in the dataset. The objects must be imported under the same names as those under which they were exported. Otherwise, they will not be imported.
The key length consists of: the client (3 digits, but only if tab is client-specific); area (2 characters); ID; and line number (4 bytes). It must not exceed 64 bytes - that is, the ID must not be longer than 55 characters, if the table is client- specific.
The key, key, must be a character-type data object (but not a string).
Additional methods for selecting and deleting data clusters in the shared memory are provided by the system class CL_ABAP_EXPIMP_SHMEM.
Please consult Data Area and Modularization Unit Organization documentation as well.
Addition 1
... = f (for each object to be imported)
Addition 2
... TO f (for each object to be imported)
Effect
The object is stored in the field f.
Addition 3
... CLIENT g (before ID key)
Effect
The data is imported from client g (provided the import/export table is tab client-specific). The client, g must be a character-type data object (but not a string).
Addition 4
... TO wa (after itab(ar) or ID key)
Effect
You need to use this addition if user data fields have been stored in the application buffer and are to be read from there. The work area wa is used instead of the table work area. The target area must correspond to the structure of the called table tab.
Addition 5
... ACCEPTING PADDING
Effect
This addition allows you to: append new fields to the end of structures, sub-structures, and internal tables. The IMPORT statement fills the additional fields with initial values; make existing fields (C, N, X, P, I1, and I2) longer; map character-type fields to STRING-type fields; or to map byte-type fields to XSTRING-type fields.
Addition 6
... ACCEPTING TRUNCATION
Effect
This addition allows you to shorten the last CHAR fields, or to omit the last component at the top level. (Until Release 4.6, you could do this without using an addition).
Addition 7
... IGNORING STRUCTURE BOUNDARIES
Effect
This addition means that only the fragment sequence is relevant - that is, that any sub-structures match. If you use this addition, the system ignores any alignment changes necessitated by Unicode - such as inserting named includes.
You cannot use this addition with either addition 4 (enlarge structure) or addition 5 (shorten structure), since it specifies that structure and include boundaries are to be ignored.
From Release 6.10 onwards, the include information is stored in datasets, so that the system can also check that includes match - that is, that sub-structures and includes (named or unnamed) are treated equally. When data is imported in a Release prior to 6.10, includes are not checked.
Related
EXPORT TO SHARED MEMORY, DELETE FROM SHARED MEMORY
Variant 5
IMPORT obj1 ... objn FROM SHARED BUFFER itab(ar) ID key.
Extras:
1. ... = f (for each object to be exported) 2. ... TO f (for each object to be exported)
3. ... CLIENT g (before ID key)
4. ... TO wa (last addition or after itab(ar))
The syntax check performed in an ABAP Objects context is stricter than in other ABAP areas.
See Cannot Use Implicit Fieldnames in Clusters und Cannot Use Table Work Areas.
Effect
Imports data objects obj1 ... objn (fields or
tables) from the cross-transaction application buffer. The data objects are read in the application buffer using the ID key of the area ar of the buffer area for the table itab (see EXPORT TO SHARED BUFFER). You must use dbtab to specify a database table although the system reads from a memory table with an appropriate structure.
The Return Code is set as follows:
SY-SUBRC = 0:
The existing data objects in the data cluster specified were imported. The rest remain unchanged (in some circumstances, this means that no data objects were imported).
SY-SUBRC = 4:
The data objects could not be imported, probably because an incorrect ID was used.
The contents of all objects remain unchanged.
Example
Import two fields and an internal table from the application buffer with the structure INDX:
TYPES: BEGIN OF ITAB3_LINE,
CONT(4),
END OF ITAB3_LINE.
DATA: INDXKEY LIKE INDX-SRTFD VALUE 'KEYVALUE',
F1(4),
F2(8) TYPE P DECIMALS 0,
ITAB3 TYPE STANDARD TABLE OF ITAB3_LINE,
INDX_WA TYPE INDX.
Import data.
IMPORT F1 = F1 F2 = F2 ITAB3 = ITAB3
FROM SHARED BUFFER INDX(ST) ID INDXKEY TO INDX_WA.
After import, the data fields INDX-AEDAT and
INDX-USERA in front of CLUSTR are filled with
the values in the fields before the EXPORT
statement.
Notes
You must declare the table dbtab, named after DATABASE using a TABLES statement.
The structure of the fields, structures, and internal tables to be imported must match the structure of the objects exported to the dataset. Moreover, the objects must be imported with the same name used to export them. Otherwise, the import is not performed.
The maximum total key length is 64 bytes. It must include: a client if the table is client-specific (3 characters); an area (2 characters); identification; and line counter (4 bytes). This means that the number of characters available for the identification of a client-specific table is 55 characters.
The key, key, must be a character-type data object (but not a string).
Additional methods for selecting and deleting data clusters in the cross-transaction application buffer are provided by the system class CL_ABAP_EXPIMP_SHBUF.
Please consult Data Area and Modularization Unit Organization documentation as well.
Addition 1
... = f (for each object to be imported)
Addition 2
... TO f (for each object to be imported)
Effect
The object is placed in the field f
Addition 3
... CLIENT g (after dbtab(ar))
Effect
Takes the data from the client g (if the import/export table dbtab is client-specific). The client g must be a character-type data object (but not a string).
Addition 4
... TO wa (as the last addition or after itab(ar))
Effect
You need to use this addition if you want to save user data fields in the application buffer and then read them from there later. The system uses a work area wa instead of a table work area. The target area must have the same structure as the table tab.
Example
DATA: INDX_WA TYPE INDX,
F1.
IMPORT F1 = F1 FROM SHARED BUFFER INDX(AR)
CLIENT '001' ID 'TEST'
TO INDX_WA.
WRITE: / 'AEDAT:', INDX_WA-AEDAT,
/ 'USERA:', INDX_WA-USERA,
/ 'PGMID:', INDX_WA-PGMID.
Variant 6
IMPORT obj1 ... objn FROM DATABASE dbtab(ar) ID key.
Extras:
1. ... = f (for each object to be imported)
2. ... TO f (for each object to be imported)
3. ... CLIENT g (before ID key )
4. ... USING form
5. ... TO wa (last addition or after dbtab(ar))
6. ... MAJOR-ID id1 (instead of ID key)
7. ... MINOR-ID id2 (with MAJOR-ID id1 )
8. ... ACCEPTING PADDING
9. ... ACCEPTING TRUNCATION
10. ... IGNORING STRUCTURE BOUNDARIES
11. ... IGNORING CONVERSION ERRORS
12. ... REPLACEMENT CHARACTER c
13. ... IN CHAR-TO-HEX MODE
14. ... CODE PAGE INTO f1
15. ... ENDIAN INTO f2
The syntax check performed in an ABAP Objects context is stricter than in other ABAP areas. See Cannot Use Implicit Fieldnames in Clusters and Cannot Use Table Work Areas.
Effect
Imports data objects obj1 ... objn (fields, structures, complex structures, or tables) from the data cluster with ID key in area ar of the database table dbtab (see EXPORT TO DATABASE).
The Return Code is set as follows:
SY-SUBRC = 0:
The existing data objects in the data cluster specified were imported. The rest remain unchanged (in some circumstances, this may mean that not data objects were imported).
SY-SUBRC = 4:
The data objects could not be imported, probably because an incorrect ID was used.
The contents of all objects remain unchanged.
Example
Import two fields and an internal table:
TYPES: BEGIN OF TAB3_TYPE,
CONT(4),
END OF TAB3_TYPE.
DATA: INDXKEY LIKE INDX-SRTFD,
F1(4), F2 TYPE P,
TAB3 TYPE STANDARD TABLE OF TAB3_TYPE WITH
NON-UNIQUE DEFAULT KEY,
WA_INDX TYPE INDX.
INDXKEY = 'INDXKEY'.
IMPORT F1 = F1
F2 = F2
TAB3 = TAB3 FROM DATABASE INDX(ST) ID INDXKEY
TO WA_INDX.
Notes
You must declare the table dbtab, named after DATABASE, using the TABLES statement (except in addition 5).
The structure of fields, field strings and internal tables to be imported must match the structure of the objects exported to the dataset. In addition, the objects must be imported under the same name used to export them. If this is not the case, either a runtime error occurs or no import takes place.
Exception: You can lengthen or shorten the last field if it is of type CHAR, or add/omit CHAR fields at the end of the structure.
The key, key, must be a character-type data object (but not a string).
Additional methods for selecting and deleting data clusters in the database table specified are provided by the system class CL_ABAP_EXPIMP_DB.
Addition 1
... = f (for each object to be imported)
Addition 2
... TO f (for each object to be imported)
Effect
The object is placed in field f.
Addition 3
... CLIENT g (before the ID key)
Effect
Data is taken from the client g (in client-specific import/export databases only). Client g must be a character-type data object (but not a string).
Example
DATA: F1,
WA_INDX TYPE INDX.
IMPORT F1 = F1 FROM DATABASE INDX(AR) CLIENT '002' ID 'TEST'
TO WA_INDX.
Addition 4
... USING form
Note
This statement is for internal use only.
Incompatible changes or further developments may occur at any time without warning or notice.
Effect
Does not read the data from the database. Instead, calls the FORM routine form for each record read from the database without this addition. This routine can take the data key of the data to be retrieved from the database table work area and write the retrieved data to this work area. The name of the routine has the format <name of database table>_<name of form>; it has one parameter which describes the operation (READ, UPDATE or INSERT). The routine must set the field SY-SUBRC in order to show whether the function was successfully performed.
Addition 5
... TO wa (after key or after dbtab(ar))
Effect
You need to use this addition if you want to save user data fields in the cluster database and then read from there. The system uses the work area wa instead of a table work area. The target area entered must have the same structure as the table dbtab.
Example
DATA WA LIKE INDX.
DATA F1.
IMPORT F1 = F1 FROM DATABASE INDX(AR)
CLIENT '002' ID 'TEST'
TO WA.
WRITE: / 'AEDAT:', WA-AEDAT,
/ 'USERA:', WA-USERA,
/ 'PGMID:', WA-PGMID.
Addition 6
... MAJOR-ID id1 (instead of the ID key).
Addition 7
... MINOR-ID id2 (with MAJOR-ID id1)
This addition is not allowed in an ABAP Objects context. See Cannot Use Generic Identification.
Effect
Searches for a record the first part of whose ID (length of id1) matches id1 and whose second part - if MINOR-ID id2 is also declared - is greater than or equal to id2.
Addition 8
... ACCEPTING PADDING
Effect
This addition allows you to append new fields to the end of structures, sub-structures, and internal tables. The IMPORT statement fills the additional fields with initial values; make existing fields (C, N, X, P, I1, and I2) longer; map character-type fields to STRING-type fields; or to map byte-type fields to XSTRING-type fields.
Addition 9
... ACCEPTING TRUNCATION
Effect
This addition allows you to shorten the last CHAR fields, or to omit the last component at the top level. (Until Release 4.6, you could do this without using an addition).
Addition 10
... IGNORING STRUCTURE BOUNDARIES
Effect
This addition means that only the fragment sequence is relevant - that is, that any sub-structures match. If you use this addition, the system ignores any alignment changes necessitated by Unicode - such as inserting named includes.
You cannot use this addition with either addition 8 (enlarge structure) or addition 9 (shorten structure), since it specifies that structure and include boundaries are to be ignored.
From Release 6.10 onwards, the include information is stored in datasets, so that the system can also check that includes match - that is, that sub-structures and includes (named or unnamed) are treated equally. When data is imported in a Release prior to 6.10, includes are not checked.
Addition 11
...IGNORING CONVERSION ERRORS
Effect
This addition prevents the system from triggering a runtime error, if an error occurs when the character set is converted. '#' is used as a replacement character.
Addition 12
... REPLACEMENT CHARACTER c
Effect
The replacement character is used if a particular character cannot be converted when the character set is converted. If you do not use this addition, '#' is used as a replacement character.
This addition can only be used in conjunction with addition 11.
Addition 13
... IN CHAR-TO-HEX MODE
Effect
All character-type fields are not converted. To convert a field, you must create a field (or structure) that is identical to the exported field or structure, except that all its character-type components must be replaced with hexadecimal fields.
You can only use this addition in Unicode programs, to allow you to import camouflaged binary data as single-byte characters. Moreover, you cannot use this addition in conjunction with the additions 8, 9, 10, 11, and 12.
Addition 14
... CODE PAGE INTO f1
Effect
The code page of the exported data is stored in the character-type field f1 - for example, to analyze data that has been imported with the IN CHAR-TO-HEX MODE addition.
Addition 15
... ENDIAN INTO f2
Effect
The byte order(LITTLE or BIG) of the exported data is stored in the field f2 - for example, to analyze data that has been imported with the IN CHAR-TO-HEX MODE addition. The field f2 must have the type ABAP_ENDIAN, which is defined in the type group ABAP. For this reason, the type group ABAP must be included in the ABAP program using a TYPE-POOLS statement.
Variant 7
IMPORT obj1 ... objn FROM DATASET dsn(ar) ID key.
This variant is not allowed in an ABAP Objects context. See Cannot Use Clusters in Files
Note
This variant is no longer supported and cannot be used.
Variant 8
IMPORT obj1 ... objn FROM LOGFILE ID key.
Note
This statement is for internal use only.
Incompatible changes or further developments may occur at any time without warning or notice.
Extras:
1. ... = f (for each field f to be imported) 2. ... TO f (for each field f to be imported)
The syntax check performed in an ABAP Objects context is stricter than in other ABAP areas. See Cannot Use Implicit Field Names in Clusters
Effect
Imports data objects (fields, field strings or internal tables) from the update data. You must specify the update key assigned by the system (with current request number) as the key.
The key, key, must be a character-type data object (but not a string).
The Return Code is set as follows:
SY-SUBRC = 0:
The existing data objects in the data cluster specified were imported. The rest remain unchanged (in some circumstances, this may mean that no data objects were imported).
SY-SUBRC = 4:
The data objects could not be imported. An incorrect ID may have been used.
The contents of all objects remain unchanged.
Addition 1
... = f (for each object to be imported)
Addition 2
... TO f (for each object to be imported)
Effect
The object is placed in field f.
Variant 9
IMPORT DIRECTORY INTO itab FROM DATABASE dbtab(ar) ID key.
Extras:
1. ... CLIENT g (after dbtab(ar)) 2. ... TO wa (last addition or after dbtab(ar))
The syntax check performed in an ABAP Objects context is stricter than in other ABAP areas. See Cannot Use Table Work Areas.
Effect
Imports an object directory stored under the specified ID with EXPORT TO DATABASE into the table itab. The internal table itab may not have the type HASHED TABLE or ANY TABLE.
The key, key, must be a character-type data object (but not a string).
The Return Code is set as follows:
SY-SUBRC = 0:
The directory was successfully imported.
SY-SUBRC = 4:
The directory could not be imported, probably because an incorrect ID was used.
The internal table itab must have the same structure as the Dictionary structure CDIR (INCLUDE STRUCTURE).
Addition 1
... CLIENT g (before ID key)
Effect
Takes data from the client g (only with client-specific import/export databases). Client g must be a character-type data object (but not a string).
Addition 2
... TO wa (last addition or after dbtab(ar))
Effect
Uses the work area wa instead of the table work area. When you use this addition, you do not need to declare the table dbtab, named after DATABASE using a TABLES statement. The work area entered must have the same structure as the table dbtab.
Example
Directory of a cluster consisting of two fields and an internal table:
TYPES: BEGIN OF TAB3_LINE,
CONT(4),
END OF TAB3_LINE,
BEGIN OF DIRTAB_LINE.
INCLUDE STRUCTURE CDIR.
TYPES END OF DIRTAB_LINE.
DATA: INDXKEY LIKE INDX-SRTFD,
F1(4),
F2(8) TYPE P decimals 0,
TAB3 TYPE STANDARD TABLE OF TAB3_LINE,
DIRTAB TYPE STANDARD TABLE OF DIRTAB_LINE,
INDX_WA TYPE INDX.
INDXKEY = 'INDXKEY'.
EXPORT F1 = F1
F2 = F2
TAB3 = TAB3
TO DATABASE INDX(ST) ID INDXKEY " TAB3 has 17 entries
FROM INDX_WA.
IMPORT DIRECTORY INTO DIRTAB FROM DATABASE INDX(ST) ID INDXKEY
TO INDX_WA.
Then, the table DIRTAB contains the following:
NAME OTYPE FTYPE TFILL FLENG
F1 F C 0 4
F2 F P 0 8
TAB3 T C 17 4
The meaning of the individual fields is as follows:
NAME:
Name of stored object
OTYPE:
Object type (F: Field, R: Field string / Dictionary struc -
My iPod isn't being used by another program!
So I just got a new, 2nd gen green iPod shuffle today. And I updated it once and I got all my Kelly Clarkson songs on it. Then I synced some MCR songs on iTunes and I plugged my iPod back into the computer via USB dock. It kept on saying 'iPod is being used by another program, not able to update.' I tried this several times and the same message kept on popping up. I got really frustrated.
Would someone be kind enough to help me?
iPod 2nd Gen Shuffle Windows XPJust try restarting your computer first. Your computer has many, many applications running at any one time so its not surprising that your iPod is being used by another programme. If you uploaded your Kelly Clarkson songs then closed iTunes and then opened iTunes up again, without turning your computer off, or even worse - just pulling your iPod out of the USB port without pressing the disconnect button!, then the computer may still think iTunes is using it and iTunes itself may think another programme is using your iPod when actually, iTunes is using it itself! So I suspect that once you have turned your computer off and turned it on again, then when you plug your iPod in again it will work.
Maybe you are looking for
-
How to do revert back to osx from windows
-
View contents of external display on main display (PIP-style)
I occasionally connect a TV to my MacBook Pro to watch movies and TV shows. The problem is that I cannot see the TV from where the computer is located. The computer must stay in this location in order to remain connected to the external HD and A/V
-
Which table for the field "Net due date" of customer line items?
Hi All, In which table could I find the field "Net due date" of customer line items? Thanks Gandalf
-
Extended Transport Control (CTC=1) issue
Hello, I have implemented extended transport control in our 3 system landscape. After setting CTC=1 for quality system, I manually set the Target client for all requests. However, now when any new request is released from Development system, I still
-
BW Statistics vs. BI Administration Cockpit
Hi to All, A question for all the guru's out there. I'm new to 2004s (who isn't). I used to work with BW Statistics on 3.5. We received our first BI 7.0 system last week. As a general prep i want to activate BW statistics on this 2004s system. I got