7373 key problems

Hi - my 3-month old 7373 has suddenly developed key problems - for example, the "back" key doesn't work at all, and the * key brings up the volume control! This started without me doing anything unpleasant to the phone - any suggestions?
-Caro

It's developed a hardware fault.
You need to visit a nokia care point to get it fixed under warranty.
Care points:
UK
http://www.nokia.co.uk/A4228006
Europe:
http://europe.nokia.com/A4388379
Elsewhere:
http://www.nokia.com and select your country.

Similar Messages

Follow up to my Luma Key problem

Hi again,
Tom has answered to my Luma Key problem of bad quality by recomending me to put the oval form under my clip instead from above, and it worked verz well.
But now I have another problem, I want now my oval to cross disolve to have the full scene that is now under to come gradually fully on screen. I have a cross disolve at the begining and at the end of the oval. Its fine for the oval to come gradually from full black screen to an oval with behind the 2nd scene, but when it shall starts to disolve, nothing happens. I also try with the pen, adding points and then pulling down in order to have the oval clip gradually dissolving, but nothing works ! Any clue ?
Thanks,
Nic

Nicolas,
One way to do this is:
- Oval on V1
- Clip1 on V2 with Composite Mode > Travel Matte Luma
- Clip1 also on V3. Change it's opacity so it is 0 until the required number of frames before the end of the Oval. Then increase it's opacity to 100 at the end of the Oval.
There might be a more efficient way to do this.

I am running CC on Windows 7. My Control key is sticking only in PPS. It is not a sticky key problem

I am running CC on Windows 7. My Control key is sticking only in PPS. It is not a sticky key problem and I am not running any similar program.

yes, photoshop.
Col. 3:17
Sam Collins

'Keys' problem when trying to re install 10.2 on Power Mac G4

Have had my Power Mac G4 wiped clean prior to selling and am now trying to reinstall 10.2.
Install disc one reached the end of its loading process and then froze.
Install disc two did not respond when loaded.
Put install disc one back in while holding down 'C' key. Started to install but soon stopped.
Went to Disc First Aid > verify disc > 'keys out of order HD need repairing'.
Clicked 'repair disc' and indicated 'repair complete'.
Returned to 'verify disc' > HD needs repairing, key length too short.
Repaired once more, keys still out of order.
Removed Install disc one and loaded Disc Warrior.
Speed inhibited by malfunction stage 5 when rebuilding directory.
So with no full operating system loaded, how do we progress?

John:
"Keys problems" are directory issues which, if not repairable by Disk Utility need a third party package like Tech Tool Pro, DriveGenius, or Disk Warrior. However, in some cases the disk hardware may be damaged or the HDD may have failed and unable to hold the format. When in DU check the SMART status. Even if the SMART Status is Verified and the HDD is more than 3 years old you should consider replacement.
cornelius

Replication for Data on DEV and QA - bad idea - primary key problem now

I goofed. I tried to use replication to keep the data on my dev machine up to date with the live server. Now when I try to work on the database, adding new stuff, it fails. It says there is a primary key problem every time I try to add
a new item to a table with my program. I should have realized this would happen! Now, even though I've removed the replication, I'm having the problem. Can anyone help me get my database functional again :/ Or should I resort to a database
restore. Thanks!

So you have an IDENTITY column in your table? Run a
DBCC CHECKIDENT (Transact-SQL) command with option RESEED to fix the current identity value to see if it works then.
Olaf Helper
[ Blog] [ Xing] [ MVP]

Escape key problems.

My escape key has been freaking out on me lately. It seems to randomly decide to press itself down very rapidly, and it continues to do so until I press the key myself, fairly hard. The key isn't jammed or anything. Is there anything I can do to fix this, short of paying a rediculous price to get a new keyboard. This escape key problem makes even the most simple action a chore.
By the way, I'm using a Lenovo 3000 n100.
Message Edited by PSOCecil on 05-23-2008 06:12 PM

Yes, they told me they didn't do any laptop work. And I sent it in when it was still under warenty, asking them to look at both my non-working USB drives (that were causing a odd power problem and causin the computer to not start), and my weird escape key. They seemed to of forgotten the escape key, and just looked at the USB drives. It's not under warenty any more, and I don't want to send it back to them again, after the ordeal I had to go through last time.

IDES Acces Key Problem

Hi guys
i install demo version of SAP, but when i try to create a custom Z program in SE38 i got an ACCESS KEY problem, although i tried installation key "29671482393151224771", but its not working
yes my installation NUMBER = INSTAL
and other transcation is working like PA30
is there any body how can help me out, suggestion....?

If you have the priviledge, you can get the developer key from SAP Marketplace. Else you have to get the developer key from your Basis guy. He/She will get it from SAP Marketplace.
In SAP Marketplace, go to Keys & Requests -> SSCR Keys

Buttons and enter key problem

hello,
there are a few projects of enterprise quality which I am developing in java swing. I found out through research that many or rather most people involved with java believe that swing is ready for enterprise class robust desktop applications.
so I as the team leador am starting my new projects in java swing.
I personally find that the amount of java libraries present provide a rich set of functionality and it gives big mussle power to the developers.
I am only concerned about one problem which many of you might have solved.
I find that I have to hit the space bar instead of enter key to fire an action. in languages like vb I can press enter key to fire the click events. specially in menu items I certainly don't expect my clients to press the spacebar. besides there are many people who are so used to the keyboard and enter key in particular that it will be hard or rather next to impossible to change their habbits.
how can I make the menu items work with the enter key. I mean do I need to create the code for keypress events every time I also create an action performed method? or is there a way where I can do it without extra coding.
it is just that I don't want to right extra code for enter key along with click events.
one more important note.
I am a blind person and I use the access bridge technology of java.
so when I am involved in coding, I use the same.
so may be my problem isn't a problem in the first place.
kindly provide me some help
thanks
Krishnakant.

The enter-key works on menu-items in all my applications. It did so since I started with java few years ago.
Maybe some other problem (OS-specific) ?

[SOLVED] Function Keys Problem On Dell Inspiron N5010

Yesterday I bought a new laptop (Dell Inspiron N5010) and immediately installed Arch Linux on it. But when I launched the installation framework, I needed to use fdisk to partition my drive manually and to open another tty, ctrl + alt + f2 or up to f7, none of them worked. When I use f4 or f5 for example, it changes the brightness of the screen cause these keys have icons on them which represent the brightness control. So I quitted, took care of that fdisk issue and got back, installed Arch Linux successfully. When launched in GNOME 3, nothing was changed. It still uses f1, f2, ... and so on as "just function keys" without using "Fn" key. It's fine somehow cause my system automatically detected those keys, I can use every single function of my keyboard. But without using Fn key, I can't actually use any fx key for my own use. For example, I can't use Tilda anymore cause when I use only f1, it tries to open monitor control stuff.
So... any ideas?
Edit: It seems that this problem is all about Arch Linux. A friend of mine has the same laptop and he has just tried Mint Debian RC and function keys worked properly. So, there's a problem and it seems it's related to Arch Linux (or maybe Xorg version, somehow?).
Last edited by Jeaquares (2011-05-18 13:07:06)

xdunlapx wrote:The function key on my dell laptop was set to the F keys, meaning you have to hit the function key and then an F key to activate the F key. I switched it in the bios so I don't have to hit the function key to activate the F keys. So I would have had to hit Fn+Ctrl-Alt-F1 for example to get to TTY 1. Now since i switched it off in the bios All I have to do is hit Ctrl-Alt-F1 to get to the terminal. But in order to turn off wifi from the F key (for example) I have to hit Fn+F2. It's switched.
I can't tell you how this was helpful. I've never noticed that there was an option in BIOS's Advanced menu for this. I updated it as "Function Key" and it solved my problem, thanks.

Private key problem

hey folks,
i would like to store a certificate's private key in a mysql db.
my problem is that i don't know how to convert it back to a PrivateKey when i extract it from the db.
i use the function Base64.encode(userPrivKey.getEncoded()); (org.bouncycastle.util.encoders.Base64; to store the private key base64 encoded in the db.
when i extract the key from the db i can decode it with Base64.decode(). the problem is that the decode function only returns a byte array.
so does anybody know how i can convert that byte array back to a private key?
or is there any other (better) solution to store and retrieve private keys from a mysql db?
many thanks
toto

I've been looking to do the same thing, and your code is helpful.
If you do not want to pull in the BouncyCastle library, you can extract the RSA private key from the PKCS8 key format by parsing the DER directly. Here is some code that does it. All you need to add is the Base64 encode, and RSA begin and end flags.
import java.util.*;
import java.io.*;
public class Pkcs8ToRsa {
    // rsaEncrytion is { pkcs-1 1 }
    // pkcs-1 is { iso(1) member-body(2) usa(840) rsadsi(113549) pkcs(1) 1 }
    private static final byte[] OID_rsaEncryption = {
        (byte)0x2a, (byte)0x86, (byte)0x48, (byte)0x86,
        (byte)0xf7, (byte)0x0d, (byte)0x01, (byte)0x01,
        (byte)0x01 };
    private static final byte[] INTEGER_v1 = { (byte)0x00 };
    private static final int TAG_INTEGER      = 0x02;
    private static final int TAG_OCTET_STRING = 0x04;
    private static final int TAG_OID          = 0x06;
    private static final int TAG_SEQUENCE     = 0x30;
    private byte[] buffer;
    private int offset;
    protected Pkcs8ToRsa(byte[] pkcs8key) {
        this.buffer = pkcs8key;
        this.offset = 0;
    public static byte[] convert(byte[] pkcs8key) {
        return (new Pkcs8ToRsa(pkcs8key)).extractPrivateKey();
    private int extractTag() {
        // Assume single octet tag
        return ((int)buffer[offset++]) & 0xff;
    private void matchTag(int tag) {
        if (extractTag() != tag) {
            throw new IllegalArgumentException("Bad input");
    private int extractLength() {
        int lengthOfLength = ((int)buffer[offset++]) & 0xff;
        if ((lengthOfLength & 0x80) == 0) {
            // Single octet
            return lengthOfLength;
        } else {
            // Multiple-octet
            lengthOfLength = lengthOfLength & 0x7f;
            int length = 0;
            for (int i = 0; i < lengthOfLength; i++) {
                length = (length << 8) | (((int)buffer[offset++]) & 0xff);
            return length;
    private void matchLength(int length) {
        if (extractLength() != length) {
            throw new IllegalArgumentException("Bad input");
    private byte[] extractValue(int length) {
        byte[] value = new byte[length];
        System.arraycopy(buffer, offset, value, 0, length);
        offset += length;
        return value;
    private void matchValue(byte[] value) {
        for (int i = 0; i < value.length; i++) {
            if (buffer[offset+i] != value) {
throw new IllegalArgumentException("Bad input");
offset += value.length;
public byte[] extractPrivateKey() {
// Encoding should be
// SEQUENCE {
// version INTEGER,
// privateKeyAlgorithm SEQUENCE {
// id OBJECT IDENTIFIER,
// Type OPTIONAL
// privateKey OCTET STRING
// attributes [0] Attributes OPTIONAL
// We are after the contents of privateKey
// Outer sequence
matchTag(TAG_SEQUENCE);
int totalLength = extractLength();
if ((offset + totalLength) > buffer.length) {
throw new IllegalArgumentException("Bad input");
// Check version == v1
matchTag(TAG_INTEGER);
matchLength(INTEGER_v1.length);
matchValue(INTEGER_v1);
// Check algorithm
matchTag(TAG_SEQUENCE);
int algorithmLength = extractLength();
int keyOffset = offset + algorithmLength;
matchTag(TAG_OID);
matchLength(OID_rsaEncryption.length);
matchValue(OID_rsaEncryption);
// Skip to privateKey
offset = keyOffset;
// Get it.
matchTag(TAG_OCTET_STRING);
int keyLength = extractLength();
if ((offset + keyLength) > buffer.length) {
throw new IllegalArgumentException("Bad input");
return extractValue(keyLength);

WBL 7.0 and SSL private key problem

Having generated certificate request, and associated private key, I obtained
the corresponding server level certificate. I am having problems starting the
server with the cert. I have configured my server appropriately, here is the SSL
configuration from the domain config.xml
<SSL Enabled="true" HostnameVerificationIgnored="true"
ListenPort="8090" Name="SampleServer"
ServerCertificateChainFileName="nasaca.pem"
ServerCertificateFileName="mydomain-cert.pem"
ServerKeyFileName="mydomain-key.pem"/>
and I am using -Dweblogic.management.pkpassword=mypassword
in the startup script, however I get :
java.lang.Exception: Cannot read private key from file /usr/user_projects/Sample/mydomain-key.pem.
Make sure password specified in environment property weblogic.management.pkpassword
is valid.
I have given the right password. So the question is why am I seeing the error
I am running this server on Sun Solaris. The password contains the usual ascii
characters, including shell special characters.
Any way checking the private key file ?
Also as we have seen problems with the particular certificate we get from the
CA, I wanted to use "utils.ValidateCertChain", alas this documented utility is
conveniently missing from weblogic.jar. Oh big blue, why didn't we go with you
Seriously, please help
Tarang

Darkit,
I have the same problem. Let me know if you find a solution to this problem.
Thanks,
Bharathi

No bootable device -- insert boot disk and press any key - problem

Hi,
I'm running an early-2008 MacBook (13-inch) that has previously had Windows Vista and Windows 7 installed to it through Bootcamp over the years.
A few weeks ago I did a fresh reinstall of OS X Lion (10.7.5) and decided to reinstall Windows 7 as well. I deleted all the partitions and started afresh. However, upon trying to reinstall Windows 7 I've become a wee bit stuck.
Bootcamp works fine at first - it lets me partition the HDD without any issues (the partition is MS-DOS - FAT32), but when it reboots it gives me a message 'No bootable device -- insert boot disk and press any key' against a black screen. I've never seen this message before and it won't let me continue with the installation. I'm able to get back into OS X by pressing the option key upon reboot.
Any idea what I'm doing wrong? As I said I've used Bootcamp several times in the past on this machine without any problems. The only difference between then and now is that my Superdrive no longer works so I'm using an external DVD drive. However, the error happens regardless of whether it's plugged in.
Cheers,
Matt

jeffjefftyjeff wrote:
The only difference between then and now is that my Superdrive no longer works so I'm using an external DVD drive. However, the error happens regardless of whether it's plugged in.
For Macs with built-in Optical drives, it must be functional for a Windows installation/installer to work. You will also need a USB2 flash drive.
On such Macs, the BCA sets the boot device to be the non-functional Optical drive, which is why you see a No boot device message.

How to repair "No bootable device insert disk and press any key" problem?

I was browsing sites using Google Chrome when all of a sudden, my laptop completely turned off. I turned the power back on only to find the error message "Intel UNDI, PXE-2.1 (build 082)" appear in white letters, followed by a bunch of other error messages, ending with, "No bootable device insert disk and press any key". Whenever I try restarting my laptop, the same error messages show up.
I've been reading about Toshiba laptops, to try to remedy this issue, and I've learned that as of 2007, Toshiba discontinued the recovery disks that had always accompanied the laptops, and instead, allow you to totally restore your computer without the help of a disk. (The model of my laptop is Satellite L300D - 01P).
Now, apparently to restore a Toshiba laptop, you're supposed to press the '0' key while also pressing the power button, but when I do this, there is a beeping noise (which is apparently supposed to happen), but the error messages (ending with "No bootable device insert disk and press any key") still show up. Other than the affirmative beeping noise, no changes occur.
Anyone had this problem or have any suggestions of how to fix it?
Thanks so much.

>...and I've learned that as of 2007, Toshiba discontinued the recovery disks that had always accompanied the laptops, and instead, allow you to totally restore your computer without the help of a disk. (The model of my laptop is Satellite L300D - 01P).
Have you also learned that you SHOULD create recovery DVD using preinstalled Toshiba recovery disc creator tool? When something goes wrong with HDD you can use this disc for operating system installation. This is clearly described in Users manuals document.
Back to your problem:
I don't know for sure but Im afraid you have some problem with HDD controller or HDD itself.
Is HDD recognized in BIOS settings (F2 at start up)?

Kodo 4.1.2 license key problem

Has anyone tried the JDO tutorial provided with Kodo 4.1.2? Everything works fine until I try to create the mappings with 'mappingtool -p jdo.properties package.jdo'. Then I get:
Exception in thread "main" com.solarmetric.license.LicenseException: No product
license key was found. Please ensure that you either have a valid "license.bea"
file in your CLASSPATH or in the directory specified by the "bea.home" environme
nt variable, or else that you have a valid license key specified in the "kodo.Li
censeKey" property of you Kodo configuration. If you need to request an evaluati
on license, please go to http://commerce.bea.com or contact [email protected]
at com.solarmetric.license.License.<init>(License.java:67)
at kodo.conf.KodoCapabilities.newLicense(KodoCapabilities.java:133)
at kodo.conf.LicenseKey.getLicense(LicenseKey.java:38)
at kodo.conf.LicenseKey.getLicense(LicenseKey.java:22)
at kodo.jdbc.meta.KodoClassMapping.validateMapping(KodoClassMapping.java
I'm running the tutorial using the kodocmd.bat and I changed the properties to point to kodo's install directory and my jdk home directory.
I've downloaded the xml document at 'http://ftpmain.bea.com/download/pub/license/kodo/kodo40/license.bea', named it license.bea and put it in kodo's install directory which is on the classpath.
I think the problem is getting Kodo to recognize the license outside of a web application. I am trying to use Kodo in a standalone application and obviously need it to recognize the license key.
Regards,
Jake

Hi Jake,
I don't think the problem is getting Kodo to recognize the license outside
the web application (I am also working on a standalone application). I think
the problem is that the code still requires the "old" solarmetric license
key next to the bea license key. I actually run into the same problem if I
don't specify both keys. Since I still have several important bugs already
open for months and registering an issue requires writing complete testcases
including manuals how to use these test cases, I actually didnt even bother
to register this one.
kind regards,
Christiaan
<Jacob Bowers> wrote in message news:[email protected]...
Has anyone tried the JDO tutorial provided with Kodo 4.1.2? Everything
works fine until I try to create the mappings with 'mappingtool -p
jdo.properties package.jdo'. Then I get:
Exception in thread "main" com.solarmetric.license.LicenseException: No
product
license key was found. Please ensure that you either have a valid
"license.bea"
file in your CLASSPATH or in the directory specified by the "bea.home"
environme
nt variable, or else that you have a valid license key specified in the
"kodo.Li
censeKey" property of you Kodo configuration. If you need to request an
evaluati
on license, please go to http://commerce.bea.com or contact [email protected].
at com.solarmetric.license.License.<init>(License.java:67)
at kodo.conf.KodoCapabilities.newLicense(KodoCapabilities.java:133)
at kodo.conf.LicenseKey.getLicense(LicenseKey.java:38)
at kodo.conf.LicenseKey.getLicense(LicenseKey.java:22)
at
kodo.jdbc.meta.KodoClassMapping.validateMapping(KodoClassMapping.java
I'm running the tutorial using the kodocmd.bat and I changed the properties
to point to kodo's install directory and my jdk home directory.
I've downloaded the xml document at
'http://ftpmain.bea.com/download/pub/license/kodo/kodo40/license.bea', named
it license.bea and put it in kodo's install directory which is on the
classpath.
I think the problem is getting Kodo to recognize the license outside of a
web application. I am trying to use Kodo in a standalone application and
obviously need it to recognize the license key.
Regards,
Jake

Primary Key problem in 11g - Known issue 6894412

Hi Everyone:
We are on JDeveloper 11.1.1.4, and JHeadstart 11.1.1.2.46. This thread originally started on the JHeadstart forum and can be seen at: Problem with LOV's in 11g
We are converting our 10g application to 11g. We have an established Oracle database that does not use pre-populated primary keys that are sequence number. Our database has composite keys and the integrity of those composite keys are established by foreign key constraints to edit tables. This approach has worked extremely well for us for over a decade, the logic of the database has been designed so that the database protects itself through the elimination of cascade deletes where necessary, and cascade deletes as the business logic dictates. This will not be changing.
In the database tables in which the 10g application has been displayed in the table format, after conversion to 11g, the LOV pop-ups are not working unless the SAVE button (or refresh of the browser) has been pressed. The first LOV pop-up will work, but as soon as you select a value from it, the next LOV pop-ups will not execute until the SAVE or REFRESH is done. This is only in table format. If the display format is form, our primary key LOV's work fine. In 10g, this functionality worked fine as long as we didn't use an "ADD ROW" button on a table format. The Add Row button caused the primary key values to be returned to the application, but not be displayed on the screen. A refresh would then show them.
From the initial investigation in the JHeadstart forum, I realize that we are hitting the "Primary Keys from Model" 6894412 problem that is listed in the 11.1.1.4 Release Notes. We have spent many, many hours establishing a re-usable .jar file of all of the entities of this very large database as suggested by JDeveloper Best Practises (http://download.oracle.com/docs/cd/B31017_01/web.1013/b25947/bcadvgen007.htm). This has worked very well for us in 10g - define all the entity specifics in one place, once, then every application can re-use them. Productivity at its finest. Therefore, we cannot make fake columns in our database in order to fix this "limitation" in 11g. We have many complex parent/child/child tables to put into our application which will not work unless our entities have the primary keys properly defined. I have tried to implement the workaround that was found in the release notes, but have been unable to get it to work.
I have created a testcase with the HRSchema by adding a table to that Schema that I can provide the SQL commands for, but I do not know who in Oracle support to send it to. Could someone please provide me with the information on who to contact. I have, I believe, taken all the steps as established in the release notes for this problem and have clearly documented the changes in the .jsff page, but the problem still exists. Clearly, I am doing something wrong, or need more information.
Thank you in advance
Mary
UofW

Frank:
I thank you for your reply.
I have been working on the JHeadstart forums for so long, I actually forgot how to submit things to Metalink, and now that I have done it again...SR #3-3101357281 for this issue....I realize why I blocked out using Metalink from my memory.
It took me an incredible amount of time to fill that SR in, then after completing everything, I was sent a request by the person assigned to the SR to repeat the instructions of how to run my testcase. I had already filled out all of the instructions on how to run the testcase in the "Notes to Oracle" section of the upload step. Almost every time I send something to Metalink, I have to repeat things. It seems as though they aren't read fully and any reason at all is used to send them back to the client.
My dealings with Metalink have been very, very frustrating. My colleagues share this sentiment.
Mary
UofW

7373 key problems

Similar Messages

Maybe you are looking for