802.11n doesn't work for WLAN created using WCS templates

But works when enabled on the controller
WLC 5508 - 7.0.116.0
WCS - running firmware 7.0.172.0
Clean Air AP used for testing -LAP 3500
Anyone aware of this issue?
Thanks

Hi,
Thanks for sharing that template.. Now can you take a snapshot of Security and QOS and Advanced tab.
ON WCS by default wmm = disabled and on WLC it is enabled by default.
Check 802.11n to see what needs to be enabled to get it to work.
http://www.cisco.com/en/US/products/ps6366/products_tech_note09186a0080a3443f.shtml#topic8
Thanks..Salil

Similar Messages

Question: why the 802.11n doesn't work on my brand new MacBook?

dear sirs,
I've just found out that the 802.11n upgrade doesn't work for my MacBook 2 GHz Intel Core Duo. How come? Is it possible? What should I do to have it talk to my also new AirPort Extreme 802.11n at the same rate?
Thanks in advance for your help.
Tomaso

Also on http://www.apple.com/airportextreme/performance.html it states:Most currently shipping Mac systems support the next-generation 802.11n technology in the new AirPort Extreme Base Station.2
2. All Mac computers with Intel Core 2 Duo and Intel Xeon processors except the 17-inch iMac with 1.83GHz Intel Core 2 Duo processor support the 802.11n technology in AirPort Extreme. These 802.11n-compatible Mac systems require enabler software that is included on the AirPort Extreme CD.

802.11n doesn't work

Hey,
I've bought an Time Capsule and I like it, but my 802.11n won't work. My 802.11n laptop always takes 802.11g, even if only n is enabled on the time capsule..
Does anyone know what the problem is? I have restored the firmware, restored all settings, rebooted it and nothing works. What should I do?
Denni(s)

Hello iDenni. Welcome to the Apple Discussions!
It may be possible that the 802.11n draft implemented on your Dell laptop is not 100% compatible with that of the Time Capsule (TC). Are you able to connect any other 802.11n devices to this TC?

PO Output for Communication doesn't work for POs created from a requisition

Hi gurus,
When I create a PO using the standard PO form, I have no problem generating the xml tags in the log file when I run the PO Output for Communication (using Debug option).
When I create a requisition from Iprocurement, it automatically generates a PO. If I run the PO Output for communication for this PO, it gives me a bunch of gibberish data in the log file. like little squares and symbols.
Can anyone help me on this. We are using R12.
Thanks in advanced!

This Program "PO Output for Communication" does effects in other parts.
I mean that this program actually sends an email (or fax or print) along with the PO in PDF attachment or in the TEXT format.
This program does other part than the above mentioned point also.If yes then provide me the information in which other parts this program effects.I believe it is only the part you mentioned above.
PO Output for Communication
http://docs.oracle.com/cd/E18727_01/doc.121/e13410/T446883T443960.htm#srs.poxpopdf
PO Output for Communication Search
http://www.oracle.com/pls/ebs121/search?word=PO+Output+for+Communication&format=ranked&remark=quick_search
Thanks,
Hussein

CSV link doesn't work with popup created using window.showModalDialog

From a data maintenance page, I allow users to view an audit trail of changes in a window which pops up using the window.showModalDialog method.
In the popup page I have a download to CSV file link. When the link is clicked nothing happens.
If I change the method to window.open the CSV link works fine.
Any ideas?

Thank you so much for your suggestions.
I selected Convert RoboHelp Edited topics to HTML in both projects and recompiled them.
I tested with Firefox 3.6 and 5.0.1 with the same maddening result: None of the linked topics popped up. Text pop-ups and See Also links continue to work. Everything works in Internet Explorer.
The errors continue to be the same ones: "Permission dennied to access property 'whname'" and "Permission denied to access property 'document'".
My next step is to test it from a server, but that, of course, requires others to assist.
Have you heard of such a problem before? Do you have any other suggestions?

Numerous problems with Airport Express 802.11n with DSL and extending WLAN

Hi all,
I have the following hardware:
802.11b/g Airport Express with firmware 6.3
802.11n Airport Express with firmware 7.3.2
MacBook Pro
iBook G4
Mac Pro PowerMac 2x450 G4
Up until now I had been using the old Airport Express as the base station connecting to my PPPoE DSL line, and it worked fine. I wanted to extend the range of this network, and got another newer Airport Express, the 802.11n model.
First I tried to use the 802.11n to connect to the Internet and the old one to extend the network. Turns out the old one can't be used to extend a network, which is bad enough, but the 802.11n one refuses to connect via DSL for more than a couple minutes, then drops the Internet connection.
So I tried downgrading the firmware to 7.3.0 and 7.3.1, but it didn't help. Did a hard reset, factory default reset, soft reset, nothing worked.
Next I tried swapping the two, putting the old Express back on the DSL line and the new one as the bridge to extend the network (using WPA2). But the 802.11n complains that it can't access the network and flashes amber.
Again, tried upgrading to 7.3.2, downgrading to 7.3.1 and 7.3.0, hard reset, soft reset. Nothing works.
Any ideas?
Cheers,
Fairfax71

I don't see any option in the Airport Admin Utility for the old Express for creating a WDS network, only to participate in one...?
That is the option you want to choose.
You could use the newer AirPort Utility to configure the older AX.
Sorry, forgot to ask something else: The 802.11n Express is able to join the WLAN created by the 802.11b/g Express as a client, but not extend it, is that what you're saying?
No. If you join the network the AX is simply acting as another wireless client and is not extending the network. The "extend" option is not available since the older AX is not 802.11n capable. You must use WDS.
Use AirPort Utiity and follow these steps for both AX's. To set up the main AX:
Click the AirPort status menu in the menu bar and choose the wireless network created by the base station you want to set up as the main base station.
Open AirPort Utility (located in the Utilities folder in the Applications folder on a Mac, or in Start > All Programs > AirPort on a Windows computer). Select the main base station, and choose Manual Setup from the Base Station menu, or double-click the base station to open the configuration in a separate window. Enter the base station password if necessary. If the base station is using the default password of public, you will not be prompted for a password.
Click the Wireless button, and then choose “Participate in a WDS network” from the Wireless Mode pop-up menu.
Click WDS and then choose “WDS main” from the WDS Mode pop-up menu.
Select the “Allow wireless clients” checkbox if you want client computers to connect to this base station.
Click the Add button and enter the MAC address of the base stations you want to connect to this base station. If there is a base station listed that you’d like to remove from the list, select the base station and click the Delete (–) button.
Click Update to send the new settings to the base stations in the WDS. By default, the “Allow wireless clients” checkbox is selected. If you deselect the checkbox, and later want to change the settings on the base station, you must connect to the base station’s LAN port with an Ethernet cable. You will not be able to connect to the base station wirelessly.
To set up the second AX to connect to the main AX:
Open AirPort Utility. Select the AX, and choose Manual Setup from the Base Station menu. Enter the base station password, if necessary. If the base station is using the default password of public, you will not be prompted for a password.
Enter the same network password as the main base station, if necessary.
Click the AirPort button, and then click Wireless. Choose “Participate in a WDS network” from the Wireless Mode pop-up menu, and choose the same channel as the main base station from the Channel pop-up menu.
Click WDS and choose “WDS remote” from the pop-up menu.
Enter the MAC address of the main base station in the WDS Main field. The MAC address is also referred to as the AirPort ID and is printed on the label on the bottom of the base station.
Click Update to transfer the settings to the base station.
This can be found on page 42 of "Designing AirPort Networks Using AirPort Utility" (direct PDF download).

Apache Sling JCR Resource Resolver doesn't work for the anchor tags which is been rendered through j

Certainly I realized that Apache Sling JCR Resource Resolver doesn't work for the anchor tags which is been rendered through jquery or javascript.
e.g.
In Felix Console , in Apache Sling JCR Resource Resolver configuration I have added following mapping.
/content/myproject/-/
So If any anchor tag is there like <a href="/content/myproject/en.html"> click me </a> then it will be mapped to "/en.html" automatically.
But the problem is there in following scenario.
I have an anchor tag as follows.
<a href="#" id="test"> click here </a>
And I am assigning the href to anchor through JQUERY.
<script>
$("#test").attr("href","/content/myproject/en.html");
</script>
Ideally this should have been mapped to "/en.html".
But it is not mapping to "/en.html". It still shows "/content/myproject/en.html".
How to resolve this.
Thanks,
Sai

In a servlet you have access to the resourceResolver so if you know which attributes contain links then it's relatively easy to apply resourceResolver.map to those links.
Your challenge is clearly how do you know which attributes are links and which aren't. Its is the same challenge that makes parsing the response and rewriting it on the way out difficult - the JSON doesn't have any semantic meaning so how do identify which attributes require rewriting. There really is no good answer ot that question in my experience - all the options have down sides.
Create some convention - all attributes matching this pattern X get mapped before being converted to JSON (could be attributes whose name ends in link, or it could a convention applied to the value of the attribute - if the attribute is a string that starts with /content apply the resource resolver mapping. In this case you have train your developers to follow this convention which is the down side.
Create some configurable list of attribute names that require mapping. This is brittle, requires training and is easy to break.
Implement a client side version of the resource resolver mapping. It wouldn't be as full proof as server side mapping (because that takes into account but you could make it work for simple logic like stripping of /content/site/en. If ou are just trying to solve the simple version of this issue - stripping off the top of the repository path this might be your best option.
Not worry about it and set up Apache 301 redirects that catch any long URLs and redirect them to short URLs (so configure apache to look for any URL matching /content/site/en and strip off /content/site/en and do a 301 redirect to the shortened URL. You end up with a lot of extra HTTP request because of all the 301s but it would work (I wouldn't recommend this option - but it is possible).

Central Autoreaction Method doesn't work for NW 7.10 in SolMan 7.01

Hello!
The central autoreaction method doesn't work for the satellite system
NW 7.10. For systems with kernel releases 4.6D, 640, 700 this method
works fine and e-mail alerts are coming.
The configuration steps I've checked:
1. Configured SCOT. The mail_send job executes every 5 minutes.
2. Background dispatching job is released: SAP_CCMS_MONI_BATCH_DP (In
central CEN/000/DDIC and satellite system SAT/000/DDIC)
3. Central dispatching job is released: SAP_CCMS_CENSYS_DISPATCHER
(Only in central system CEN/000/DDIC)
4. The sapccm4x-agent registered as web service within CEN using
Create Remote Monitoring for NW 7.10:
Connection test to SAPCCM4X.<satellite_host>.00 was performed successfully
5. Created a new autoreaction method by copying method
CCMS_OnAlert_Email_V2 to the own Z_CCMS_Email_Alert_CEN:
Function Module - SALO_EMAIL_IN_CASE_OF_ALERT_V2
Execute Method on Any Server and Only in Central System, triggered by
CCMS agents
SENDER (EMAIL_USER) exists in CEN/000 , RECEPIENT - <distr list
SAP_BASIS in CEN/000>, RECIPIENT-TYPEID - C
6. Got MTE Classes from NW 7.10 satellite system and assigned this method
Z_CCMS_Email_Alert_CEN to an MTE-class CCMS_ORAucPSAPSR3 for NW 7.10
satellite system. The alert is red right now.
7. The mail_send job doesn't send anything, in SCOT there are no
sending orders.
8. Autoreaction status on this alert in CEN in RZ20 - Sent to CEN.
CEN_CHECKED.
9. The alert status in RZ20 in CEN - ACTION_REQUIRED. If I execute it
in manual the alert status changes to ACTIVE, but no email and no
messages in sending orders in SCOT.
Please help me to solve this issue.
Thank you!

Hi,
Since you are using RECIPIENT-TYPEID =C i.e. General distribution list, pls ensure to have shared type of list created in SBWP.
Also pls verify your SCOT configutaion , if apropriate address area i.e. *@abc.com
Also one point to note that even if you trigger auto reaction method manually via RZ20 , pls check if alert is listed in SOST.
if yes , that means there is problem in either SCOT configuration or distribution list.
If alert is not appearing in SOST , that means you need to check auto reaction method parameters;
Z_CCMS_OnAlert_Email_V2 , here check release section if Auto reaction execution method is checked.
Regards,
Rupali

Oracle client 9i doesn't work for windows ordinary user

Hello All,
I've installed oracle 9i client on windows xp. Client software works for user belonging to windows administrators group. it doesn't works for ordinary users not belonging to administrators group. Particularly when i run sqlplus from command line i get following error :
Incorrect environment variable PLUS_DFLT
Program execution error.
i also need access to Oracle ODBC driver.
When i try to configure ODBC source (created by user with administrator privileges) by common user i get following errors :
The setup routines for Oracle for Oracle in OraHome9i ODBC driver couldn't be loaded due to system error code 5
Could not load the setup or translator library
Very appreciate for any help.
Regards Arkadiusz Masny

It sounds like the users on the machine do not have access to the Oracle home directory. Check the permissions of the folder by right properties, select the user and check that they have read and then select advanced. Tick the "replace permission entries....." box and apply. This will re apply all user rights in all folders and subfolders. Try again.
HTH Mark F

PSPaletteMenu category doesn't work for automation plugins

Hello,
I would like to have a menu item under Photoshop "Window" menu for my automation plugin.
There is a notice in the PIPL.r file that goes with SDK:
// Use PSPaletteMenu category to add a menu item on the Window (i.e., palette) menu.
// This is currently only enabled for automation plugins.
PSPaletteMenu ="**Palette**";
However when write my PiPL res like in example below
resource 'PiPL' (ListenerResourceID, plugInName " PiPL", purgeable)
Kind { Actions },
Name { plugInName "..." },
Category { "**Palette**" }, // or Category { PSPaletteMenu }
Version { (latestActionsPlugInVersion << 16) | latestActionsPlugInSubVersion },
menu is not shown under Window menu :(
Want to note that if I specify Category { PSHelpMenu } it works correctly and menu item is shown under Help menu. PSPaletteMenu also doesn't work for Listener plugin that ships with PS SDK.
Looks like plugin is not recognized as automation plugin, but I have correct info.plist props (on MacOS X version)
What should be done to have my plugin menu item under "Window" menu?
Regards,
Mac Developer

Hi Tom, thanks for your reply. Actually I'm not asking about floating palette (which I actually created and there is no issues observed). I just need my automation (!) plugin entry point to be called with kPSDoIt ("Do It") selector action after menu item is chosen under Window menu. (like it works in case PSHelpMenu)
In the PIPL.r file that goes with SDK it states that
// Use PSPaletteMenu category to add a menu item on the Window (i.e., palette) menu.
// This is currently only enabled for automation plugins.
PSPaletteMenu ="**Palette**";
Is it documentation issue?
Regards,
Mac Developer

My password doesn't work for itunes

My password doesn't work for itunes

I was wrong --- turns out I did create a password long ago for my first backup, different than my iTunes password, and fortunately I was able to remember it. The restore worked fine once I gave it the password that it wanted.

The enclosure in RSS feed doesn't work for Itune

I subscribed to my podcast rss feed to ITune, which was valid and had been tested successfully with other aggregator such as Ipodder, however, it doesn't work for ITune. When I hit "get" button next to my podcast name, I always get "!" sign in front of the name, and when I clicked it, I got error message "There was a problem downloading 'XXXXX'. The network connection could not be made".
I'm not sure if this problem resulted from the "rewrite" function I used on my podcasting server in order to track the downloading. Here is how it works: When a mp3 file is requested, my web server will redirect the request to another asp.net program to do something and then redirect to the real mp3 file for downloading. Can it be problem in Itune? But I can use this enclosure url to download this mp3, and also the Ipodder works file with this rss feed.
Any help will be appreciated.
Leo
Windows XP

Thanks for your reply.
However, according to the iTune specs as following,
Tracking Usage
Please note that iTunes does not provide usage statistics. Some podcasters have created mechanisms for tracking the number of times that each episode has been downloaded. iTunes does not provide support in how to track downloads, but the following notes may be helpful:
* 302s will be followed to a depth of 5 redirects and will not update the feed URL in the directory.
* The URL before the GET-style form values (before the first ?) must end in a media file extension (e.g. mp3). To work around this, the feed provider can alter their URL from this:
http://www.podcaster.com/load.php?f=&Wipeout.php
to this:
http://www.podcaster.com/load.mp3?f=&Wipeout.mp3
Notice how it says load.mp3 instead of load.php. It should be possible to accomplish this via various means, such as web server rewrites. iTunes looks at the extension of the path part of the url, i.e. the part before the”?”.
The http request redirection is allowed as long as the appropriate file extension such as ".mp3" is used.
By the way, I tested it with "no redirection" version, which worked fine.
Leo

Receiver determination doesn't work for same IDoc type but in differentSWCV

hi guys,
we have an emergency now. Receiver determination doesn't work for same IDoc type but in different SWCV.Please check below for detail.
1. The process flow is : R/3 IDoc -> XI -> Third party system
2. In previous release R13, IDoc ORDERS05 was imported and used in XI and software component version is R13. And receiver determination was created.
3. Now, in new release R17, IDoc ORDERS05 was imported from R/3 to XI again and software component version is R17. And in R17, the receiver determination created in R13 was used for both old interface(R13) and new interface in R17.
Then we encountered the problem, both interfaces doesn't work now, even we deleted the receiver condition(In R13, IDoc ORDERS05 was sent to system A, and in R17 IDoc ORDERS05 was sent to system B, RCVPRN was used as an condition).
Does anyone encounter this problem? really need and appreciate your help.
-Eddie

information from monitor:
Status Sender Service Sender Namespace Sender Interface
reschedul XXXCLNT100 urn:sap-com:document:sap:idoc:messages ORDRSP.ORDERS05
columns for "Receiver Service","Receiver Namespace", "Receiver Interface" are blank
And then double click records in monitor, go into detail information...
Normally there's lots of setps existed, such as
Inbound Message ( CENTRAL )
Receiver Identification
Interface Determination
Receiver Grouping
Message Branch According to Receiver List
Technical Routing
Call Adapter
But now there's only one setp -
"Inbound Message ( CENTRAL )" existed, no any another setp..., and payload in inbound message looks good.
And in SMQ2, I checked the queue information, found there's an error - "An exception occurred that was not caught." No any other detail information for this error.

Filter doesn't work for filter-servlet name mapping

          Filter doesn't work for filter-servlet name mapping.
          it only works for filtering url-pattern.
          Does anybody has some idea?
          BTW, does anybody know if filter will be invoked when
          call RequestDispatcher.include/forward?
          Version: WLS6.1 SP1 on solaris.
          Thanks a lot.
          Heng


The Filter defined will only be run in the context that it is defined in. Since you are creating a new context, you will have to assign a new Filter. BTW, why not include the static content in the WAR with the dynamic stuff?

The wifi at my school isn't very good. And I can't send iMessages through it. It works for some apps like score center and my radar app, but doesn't work for other apps like clash of clans and iMessage. How can I get it to work on that wifi network

The wifi at my school isn't very good. And I can't send iMessages through it. It works for some apps like score center and my radar app, but doesn't work for other apps like clash of clans and iMessage. How can I get it to work on my school wifi. I have an iPhone 4S on AT&T and iOS 7.04

In a roaming network, your "main" router is the device that would require port mapping/forwarding to be configured in order to access the IP camera from the Internet. This router is also the one that would be provide the private IP address for the camera which you will want to be a static one.
So as you described your network, the IP cameras should be getting an IP address or you assigned it a static one and this is the address that you would enter in the Private IP address (or equivalent depending on the router used) field when setting up port mapping.
If you are not able to access this camera from the local network, then this should be troubleshot first.

802.11n doesn't work for WLAN created using WCS templates

Similar Messages

Maybe you are looking for