802.1x "MachineorUser" Auth Mode strange behavior in 2950 & 3750 Switches

Good Day Support Team around the world,
Having started recently  tests with 802.1x in a lab environment, I noticed  a strange behavior related to authentication. First let me provide you with the network components I used.
supplicant:                    domain-joined laptop with Windows XP SP3 802.1x embedded client
authenticator1:              Cisco 2950-24   
authenticator2:              Cisco 3750-24
authentication server:     MS NPS Windows Server 2008
1.     In the first scenario with 3750 switch when I connect the laptop to relevant port the machine authentication is successful. Then I try to login with a domain account and again the authentication is completed without any problem. Then I log off and user authentication is revoked and the machine authentication is used again without any issue. When I try to login again as local user the authentication fails as expected but the port remains disabled (port blinking amber) regardless the fact that port is configured for Auth-Fail Vlan. When I log off then the machine authentication is used again and the access is granted.
2.     In the second scenario with 2950 switch as authenticator, I follow the same steps as before and when I try to login as local user the authentication is failed and the port is assigned the Auth-Fail Vlan (as expected based on configuration). However when I log off it seems that the 2950 switch still use the Auth-Fail Vlan for that port and never authenticates again for machine authentication.
Could you please let me someone know if this is normal ( I suppose no). Please find attached the relevant debug output from the second scenario.
Thank you!!!

Hi,
basically what happens is that the maximum EAP packet size for communication between client and RADIUS server is negotiated. Therefore, in your case the switch notifies NPS that the client is capable of handling packets up to 9000 bytes in size.
EAP messages, especially those containing the server certificate, are usually bigger than 1500 bytes and arrive at the switch in multiple fragments:
Mar  6 15:50:11.881: RADIUS(0000002C): Received from id 1645/41
Mar  6 15:50:11.881: RADIUS/DECODE: EAP-Message fragments, 253+253+253+253+253+253+253+253+20, total 2044 bytes
Having learned that 2044 bytes is acceptable for the client, the switch forwards the full message in one chunk, but since your client is likely to have set the interface MTU to 1500, the packet is oversized and never reaches its destination.
And yes, I think changing the System Jumbo MTU to 1500 bytes would lead to the same result. If my memory serves me right, a new setting takes effect only after a reboot, so I'd suggest giving it a go in your lab first.
Best regards,
Josef

Similar Messages

  • Strange behavior of db update in debugging and no debugging execution mode

    Hi Experts,
    I am finding a strange behavior of certain Z update function (to update equipment install base) : The update happens perfectly if I go into debug mode and do a F6 on the function call. But if I executed it completed without going in debug mode, that update does not happen!
    I checked the function and found that it does have COMMIT WORK AND WAIT which gets triggered every time I call this function.
    Also does compiling the code with some changes and executing in cycles have any affect on the behavior of code? Do I need to do a /nse38 every time, before I do executing? I am not sure this is in any way related to the problem.
    Will appreciate your helpful responses on this.
    Best regards,
    Vishnu T

    Withing the Z function, it is the calls to SAP standard functions that are doing the update. Here is the function body
    FUNCTION Z_B_BAPI_EQMT_INSTALLHR.
    *"*"Local interface:
    *"       IMPORTING
    *"             VALUE(EQUIPMENT) LIKE  BAPI_EQUI-EQUIPMENT
    *"             VALUE(SUPEREQUI) LIKE  BAPI_EQHR-SUPEREQUI
    *"             VALUE(POSEQUI) LIKE  BAPI_EQHR-POSEQUI OPTIONAL
    *"             VALUE(DATE) LIKE  SY-DATUM DEFAULT SY-DATUM
    *"             VALUE(TIME) LIKE  SY-UZEIT DEFAULT SY-UZEIT
    *"             VALUE(COMMIT) LIKE  VBMOD-VBMODE DEFAULT SPACE
    *"       EXPORTING
    *"             VALUE(EQUIMASTER) LIKE  BAPI_EQUI STRUCTURE  BAPI_EQUI
    *"             VALUE(EQUITIME) LIKE  BAPI_EQUZ STRUCTURE  BAPI_EQUZ
    *"             VALUE(EQUITEXT) LIKE  BAPI_EQKT STRUCTURE  BAPI_EQKT
    *"             VALUE(EQUILOCATION) LIKE  BAPI_ILOA
    *"                             STRUCTURE  BAPI_ILOA
    *"             VALUE(EQUISALES) LIKE  BAPI_EQSD STRUCTURE  BAPI_EQSD
    *"             VALUE(EQUIHIERARCHY) LIKE  BAPI_EQHR
    *"                             STRUCTURE  BAPI_EQHR
    *"             VALUE(RETURN) LIKE  BAPIRETURN STRUCTURE  BAPIRETURN
      CLEAR: EQUIMASTER, EQUITIME, EQUITEXT, EQUILOCATION.
      CLEAR: EQUISALES, EQUIHIERARCHY, RETURN.
    * Object key must not be initial.
      IF EQUIPMENT IS INITIAL.
        CALL FUNCTION 'MESSAGE_SET_AND_CONVERT'
             EXPORTING
                  MSG_CLASS  = 'IS'
                  MSG_TYPE   = 'E'
                  MSG_NUMBER = '498'
                  MSG_PARM1  = 'EQUIPMENT'
             IMPORTING
                  RETURN     = RETURN.
        EXIT.
      ENDIF.
    * Superior equipment must not be initial.
      IF SUPEREQUI IS INITIAL.
        CALL FUNCTION 'MESSAGE_SET_AND_CONVERT'
             EXPORTING
                  MSG_CLASS  = 'IS'
                  MSG_TYPE   = 'E'
                  MSG_NUMBER = '498'
                  MSG_PARM1  = 'EQUIPMENT'
             IMPORTING
                  RETURN     = RETURN.
        EXIT.
      ENDIF.
    * Specified equipment number must exist.
      PERFORM EQUIPMENT_CHECK_VEQUI                             "P9CK056992
        USING                                                   "P9CK056992
          EQUIPMENT "->equipment number                         "P9CK056992
          'X'       "->record must exist (will be read)         "P9CK056992
          'X'       "->record must be locked                    "P9CK056992
          NEW_VEQUI "<-before image read                        "P9CK056992
          I_CODE.   "<-error code                               "P9CK056992
      IF I_CODE <> 0.
        CALL FUNCTION 'MESSAGE_CONVERT'
             EXPORTING
                  SY_SUBRC = 4
             IMPORTING
                  RETURN   = RETURN
             EXCEPTIONS
                  OTHERS   = 1.
        EXIT.
      ENDIF.
    * Superior equipment must exist.
      PERFORM EQUIPMENT_CHECK_VEQUI                             "P9CK056992
        USING                                                   "P9CK056992
          SUPEREQUI "->superior technical object number         "P9CK056992
          'X'       "->object must exist (will be read)         "P9CK056992
          SPACE     "->object will not be locked                "P9CK056992
          OLD_VEQUI "<-object data read                         "P9CK056992
          I_CODE.   "<-error code                               "P9CK056992
      IF I_CODE <> 0.
        CALL FUNCTION 'MESSAGE_CONVERT'
             EXPORTING
                  SY_SUBRC = 4
             IMPORTING
                  RETURN   = RETURN
             EXCEPTIONS
                  OTHERS   = 1.
        EXIT.
      ENDIF.
    * Install equipment
      CALL FUNCTION 'EQUIPMENT_INSTALL'
           EXPORTING
                READ_SOBJ   = ' '
                READ_ROBJ   = ' '
                LOCK_SOBJ   = ' '                               "P9CK056992
                POSEQUI     = POSEQUI
                I_DATE      = DATE
                I_TIME      = TIME
                EXEC_MEAS   = 'X'                               "P9CK159924
           CHANGING
                S_EQUI      = NEW_VEQUI
                R_EQUI      = OLD_VEQUI
           EXCEPTIONS
                ERR_INSTALL = 1
                OTHERS      = 2.
      I_CODE = SY-SUBRC.
    * Fill return structure.
      CALL FUNCTION 'MESSAGE_CONVERT'
           EXPORTING
                SY_SUBRC = I_CODE
           IMPORTING
                RETURN   = RETURN
           EXCEPTIONS
                OTHERS   = 1.
      IF RETURN-TYPE <> 'S'.                                    "P9CK056992
        PERFORM EQUIPMENT_UNLOCK USING EQUIPMENT.               "P9CK056992
        EXIT.                                                   "P9CK056992
      ENDIF.                                                    "P9CK056992
    * Copy local view structure to export structures.
      PERFORM MOVE_VIEW_TO_EQUIPMENT USING NEW_VEQUI EQUIMASTER EQUITIME
                                           EQUITEXT EQUILOCATION EQUISALES
                                           EQUIHIERARCHY.
      CALL FUNCTION 'CHECK_COMMIT'
           EXPORTING
                COMMIT_MODE              = COMMIT
           EXCEPTIONS
                ERR_COMMIT_WORK_AND_WAIT = 1
                OTHERS                   = 2.
    ENDFUNCTION.
    The COMMIT parameter is passed with value 'S' which is an indication to CHECK_COMMIT to do COMMIT WORK AND WAIT. And I am always passing an S and as I said that the update in fact does happen if I do a F6 on the CALL to the above function.

  • Strange behavior when I try to match a mpeg2 video with the menu size image

    hello all,
    got a strange behavior when I try to match a mpeg2 video with the menu size image,
    menu size is 1920 x 1080 (photoshop file)
    mpeg2 video 1920 x 1080 (1second 19 frames)
    the idea is to go from the menu link to the next sub menu with a video as transition, using the same image on the video as the menu and then zooming in (in my case through a door) to end up after the zoom in the next level menu.
    I try to achieve a smooth change from the first play menu picture to the video image into the next level menu picture,
    everything works good but when I watch it on the preview mode on the left and right side of the video it shows a black bar at least 15 to 25 pixel wide, that means the video image appears smaller and it causes a little jump what is preety disturbing and can not be sold as a professional work.
    why encore treats the video size and picture differently?
    it's gratful appreciated if somebody who got experience in a transition I mentioned obove posting any solution,
    thankl you all

    Hi all
    I'm having a very similar problem with Encore. My menu items are distorting (a minor but infuriating squashing top and bottom) when previewed.
    Using Encore,PS,AE CS4
    DVD format SD PAL DV widescreen
    I created 3 menu frameworks and 3 video transistions to link them in AE. On the final frame of each transistion in AE I saved the frame with Composition>Save Frame to> Photoshop Layers. In PS i added the button functionality and saved.
    In Encore I use Dynamic link to import AE transistions as timelines and imported each PS menu twice, once as "menu" and once as an asset.
    When I link the timeline transistions to the menu and preview at the point the menu begins the whole image is squashed. When the next transistion is activated the image returns to its original size.
    Thinking it was the use of PS that was causing the menus to distort I used the menu asset directly in the time line. Obviously no menu functionality but also no distortion. The AE transistion flowed straight into the "menu" just as I expected.
    In the properties panel the menu Aspect Ratio 16:9
    The AE transistions PAR is SD PALwidescreen 1.4587.
    I did try the Blu Ray suggestion above but the same distortion was apparent.
    Any suggestions short of squashing the video to match the menu would be welcomed.
    Thanks

  • Strange behavior after using NIK plug-ins

    Every once in a while I encounter this strange behavior of Aperture. I first process the NEF's in Aperture (white balance, Exposure, Enhance... and, when needed, Cropping) and then I fine tune the image with the NIK plug-ins; when needed DfIne 2.0, Viveza, Color Efex Pro 3.0 and Sharpener Pro 3.0 Output Sharpener.
    If I look at the processed picture then, I get a perfect presentation of the photo;
    !http://users.skynet.be/fc419085/Aperture-1.jpg!
    But when I press Z to zoom into a 100% preview I get this;
    !http://users.skynet.be/fc419085/Aperture-2.jpg!
    When I select the Loup in the normal view mode I get this;
    !http://users.skynet.be/fc419085/Aperture-3.jpg!
    This doesn't happen with all my pictures, yesterday I processed a series of 8 pictures an 6 of them showed this behavior the other two acted normal and I can't see what I did differently whit these last two.
    When I export the strangely behaving photo's to a Tiff or a Jpeg, I get perfectly normal pictures.
    The original NEF behaves normal. I have seen this behavior with NEF's from a Nikon D200, D2x and a D300. I have Aperture 2.1.2 running on a 2.33 GHz Intel Core Duo MacBook Pro running Mac OS X 10.5.6
    Does anybody know what's happening and if so, how to solve this problem?
    Cheers,
    Ivan

    I did some testing and what I found is too weird to be true.
    First this mashed up look doesn't only happen after using NIK plug-ins, it also happens when making a roundtrip to Photoshop, given that certain conditions are met.
    Give it a try yourself. Crop an image to an uneven pixelcount dimension, for example 4227 x 2797 and make a roundtrip to Photoshop. Then have a 100% view look at the new image in Aperture. You'll have a mashed up view, at least I do.
    Now crop the same original image to an even pixelcount dimension, for example 4228 x 2798 and make an roundtrip to Photoshop once more. When you have a 100% view of the new image now, you'll see a perfectly normal photo.
    Do you think Aperture developers are reading this forum?

  • Strange behavior in deleting images - works on second but not first try

    In Library mode, Grid view, right after importing, after I select several images with an "x" to be deleted, when I bring up the "Delete Rejected Photos" dialog, I find this strange behavior. I get the message that there are not photos marked for deletion. I then invoke the dialog again, and my photos that were marked show up, with the choices of deleting from disk or removing from the catalog. What am I likely doing wrong? I'm on WinXP Pro with LR 2.2. Thanks!
    Dilip

    Dilip,
    I too have seen this behaviour in all versions of LR. Even when deleting a single image in the develop module. If LR is writting the preview you can't delete the file until the preview is rendered. I think it's more to do with the OS not allowing the deletion of a file being accessed than a LR bug as such.
    Gordon

  • Switch port in dot1x multi-auth mode stops passing traffic

    Dear All,
    I am experiencing a problem on a Catalyst 4510 (cat4500-ipbasek9-mz.122-53.SG.bin) with 802.1x configured. Client PCs are connected via a mini desktop switch to a Cat 4510 switched port in multi-auth mode. The configuration of the port follows:
    interface GigabitEthernet2/34
    switchport mode access
    ip arp inspection limit rate 30
    authentication host-mode multi-auth
    authentication port-control auto
    authentication periodic
    authentication timer reauthenticate server
    dot1x pae authenticator
    dot1x timeout tx-period 5
    dot1x max-reauth-req 6
    spanning-tree portfast
    ip verify source vlan dhcp-snooping
    end
    It happens from time to time that the Cat 4510 port stops passing traffic. Reconnecting the mini switch recovers the communication. Client PCs connected to the mini switch seem to be authorized at the moment when the problem occures. The RADIUS Termination-Action attribute is set to RADIUS-Request. The problem is not present if "authentication periodic" is disabled.
    Did anyone experience a simmilar problem? Any advice?
    Thanks.
    Mirek

    We have the same issue on 3750E switch running 12.2.(58)SE

  • Strange behavior of system with enabled FileVault2, Roaming profile

    Hello,
    I have encountered strange behavor of my Macbook Air after some testing.
    Macbook Air 2012 was newly installed with 10.8.4 and joined network account server on 10.8.4 server with Roaming profile (synced with server home directory). After installing some basic apps like iWork I turned on FileVault.
    Then I start to have the strange behavior - iWorks are not displaying content of document - it seams blank - just white screen without any borders where should be at least lines in numbers or empty cells.
    Another display problem is in Safari. On same pages (even default Top SItes) it`s flashing and especially when scrolling.
    Did you encountered something similar? I`m not able to get rid of it.
    Computers was used for some time before turining on FIle Vault and problem started to occur after this action. Disabling of FileVault didn`t helped (properly restarted between steps).
    I didn`t found anything strange in Console or elsewhere..

    Please read this whole message before doing anything.
    This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
    Step 1
    The purpose of this step is to determine whether the problem is localized to your user account.
    Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
    While logged in as Guest, you won’t have access to any of your personal files or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
    Test while logged in as Guest. Same problem?
    After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
    *Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
    Step 2
    The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login, by a peripheral device, or by corruption of certain system caches.
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled on some models, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to boot and run than normal, and some things won’t work at all, including sound output and Wi-Fi on certain iMacs.  The next normal boot may also be somewhat slow.
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Test while in safe mode. Same problem?
    After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of steps 1 and 2.

  • Strange behaviors

    I was in the Finder going through my files trying to free up some disk space and some strange behaviors happened. As I go through the media files (video clips, flash files, etc.) they automatically play even though I did NOT hit the space bar to invoke Quicklook option and it happens to all of the files in that folder. Now I wasn't bothered by that, just thought it was strange however what I found interesting is as all of these happening is the Apple Menu Bar is disappear but as I move the mouse up top it reappear as if it has a hide menu bar and unhide the menu bar as I hover over with the mouse. Does that mean that it is possible to do a hide/unhide menu bar option? Never seen that before, does anyone else experience this?

    Welcome to Apple Discussions.
    8lias wrote:
    Does that mean that it is possible to do a hide/unhide menu bar option?
    No, it only means you are able to do it because there is some corruption either in your Home folder or in the system. Let's find out:
    Create a new account, name it "test" and see how your apps work in that User acct? (That will tell if your problem is systemwide or limited to your User acct.) This account is just for test, do nothing further with it.
    Open System Preferences >> Accounts >> "+" make it an admin account.
    If the problem is present in the test account also, then it is systemwide. In this case try repairing this with the 10.5.2 Combo Update This is a fuller install, as opposed to an incremental "delta" update so it should overwrite any files that are damaged or missing. It does not matter if you have applied it before.
    (Note: If you are running build 9C7010 do not install the Update.)
    Remember to Verify Disk before update and repair permissions after update from /Applications/Utilities/Disk Utility.
    If the problem does not appear in the test account try starting in "Safe Mode" (It will take a bit more time to startup because it runs a directory check first).
    If that works go to System Preferences >> Accounts >> Login Items and remove them. Boot normally and test. If there are still problems, go to ~(yourHome)/Library/Contextual Menu Items and move whatever is there to the desktop. Then do the same with /Library/Contextual Menu Items. Lastly, try moving /Users/Home)/Library/Fonts to your desktop and restarting.
    Log out/in or restart, if that sorts it start putting items back one at a time until you find the culprit.
    Let us know.
    -mj

  • Strange behavior after suspend.

    Hi,
    For some time I have a strange behavior of my system after I awake my computer(after suspend). This problem don't disappear after update.
    Ok, so if I suspend my computer, and awake him I can't run any program. Even if i was open some application, this application crashes. I have to restart my machine.
    Somebody had similar problem or know how help?
    I'm using Arch Linux x64, kernel 3.8, openbox. Suspend by "systemctl suspend".

    OK, maybe good idea is paste here my output journal:
    # journalctl --since=today | tac | sed -n '/-- Reboot --/{n;:r;/-- Reboot --/q;p;n;b r}' | tac
    -- Logs begin at Mon 2012-09-10 20:20:07 CEST, end at Thu 2013-03-28 10:17:18 CET. --
    Mar 28 10:10:36 localhost kernel: Freezing user space processes ... (elapsed 0.01 seconds) done.
    Mar 28 10:10:36 localhost systemd[1]: Time has been changed
    Mar 28 10:10:36 localhost systemd[1]: systemd-tmpfiles-clean.timer: time change, recalculating next elapse.
    Mar 28 10:10:36 localhost kernel: Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
    Mar 28 10:10:36 localhost dhcpcd[1435]: eth1: carrier lost
    Mar 28 10:10:36 localhost kernel: PM: Entering mem sleep
    Mar 28 10:10:36 localhost kernel: Suspending console(s) (use no_console_suspend to debug)
    Mar 28 10:10:36 localhost kernel: sd 0:0:0:0: [sda] Synchronizing SCSI cache
    Mar 28 10:10:36 localhost kernel: sd 0:0:0:0: [sda] Stopping disk
    Mar 28 10:10:36 localhost kernel: cfg80211: Calling CRDA for country: PL
    Mar 28 10:10:36 localhost kernel: <6>[fglrx] IRQ 46 Disabled
    Mar 28 10:10:36 localhost kernel: <6>[fglrx] Preparing suspend fglrx in kernel.
    Mar 28 10:10:36 localhost kernel: <6>[fglrx] Suspending fglrx in kernel completed.
    Mar 28 10:10:36 localhost kernel: <6>[fglrx] Power down the ASIC .
    Mar 28 10:10:36 localhost kernel: PM: suspend of devices complete after 1126.292 msecs
    Mar 28 10:10:36 localhost kernel: PM: late suspend of devices complete after 0.263 msecs
    Mar 28 10:10:36 localhost kernel: r8169 0000:09:00.0: System wakeup enabled by ACPI
    Mar 28 10:10:36 localhost kernel: ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
    Mar 28 10:10:36 localhost kernel: PM: noirq suspend of devices complete after 52.988 msecs
    Mar 28 10:10:36 localhost kernel: ACPI: Preparing to enter system sleep state S3
    Mar 28 10:10:36 localhost kernel: PM: Saving platform NVS memory
    Mar 28 10:10:36 localhost kernel: Disabling non-boot CPUs ...
    Mar 28 10:10:36 localhost kernel: smpboot: CPU 1 is now offline
    Mar 28 10:10:36 localhost kernel: smpboot: CPU 2 is now offline
    Mar 28 10:10:36 localhost kernel: smpboot: CPU 3 is now offline
    Mar 28 10:10:36 localhost kernel: Extended CMOS year: 2000
    Mar 28 10:10:36 localhost kernel: ACPI: Low-level resume complete
    Mar 28 10:10:36 localhost kernel: PM: Restoring platform NVS memory
    Mar 28 10:10:36 localhost kernel: Extended CMOS year: 2000
    Mar 28 10:10:36 localhost kernel: CPU0: Thermal monitoring handled by SMI
    Mar 28 10:10:36 localhost kernel: Enabling non-boot CPUs ...
    Mar 28 10:10:36 localhost kernel: smpboot: Booting Node 0 Processor 1 APIC 0x4
    Mar 28 10:10:36 localhost kernel: CPU1: Thermal monitoring handled by SMI
    Mar 28 10:10:36 localhost kernel: CPU1 is up
    Mar 28 10:10:36 localhost kernel: smpboot: Booting Node 0 Processor 2 APIC 0x1
    Mar 28 10:10:36 localhost kernel: CPU2: Thermal monitoring handled by SMI
    Mar 28 10:10:36 localhost kernel: CPU2 is up
    Mar 28 10:10:36 localhost kernel: smpboot: Booting Node 0 Processor 3 APIC 0x5
    Mar 28 10:10:36 localhost kernel: CPU3: Thermal monitoring handled by SMI
    Mar 28 10:10:36 localhost kernel: CPU3 is up
    Mar 28 10:10:36 localhost kernel: ACPI: Waking up from system sleep state S3
    Mar 28 10:10:36 localhost kernel: ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
    Mar 28 10:10:36 localhost kernel: sdhci-pci 0000:07:00.0: MMC controller base frequency changed to 50Mhz.
    Mar 28 10:10:36 localhost kernel: sdhci-pci 0000:07:00.0: proprietary Ricoh MMC controller disabled (via firewire function)
    Mar 28 10:10:36 localhost kernel: sdhci-pci 0000:07:00.0: MMC cards are now supported by standard SDHCI controller
    Mar 28 10:10:36 localhost kernel: PM: noirq resume of devices complete after 133.780 msecs
    Mar 28 10:10:36 localhost kernel: PM: early resume of devices complete after 0.127 msecs
    Mar 28 10:10:36 localhost kernel: ehci-pci 0000:00:1a.0: setting latency timer to 64
    Mar 28 10:10:36 localhost kernel: mei 0000:00:16.0: irq 43 for MSI/MSI-X
    Mar 28 10:10:36 localhost kernel: snd_hda_intel 0000:00:1b.0: irq 44 for MSI/MSI-X
    Mar 28 10:10:36 localhost kernel: pci 0000:00:1e.0: setting latency timer to 64
    Mar 28 10:10:36 localhost kernel: ehci-pci 0000:00:1d.0: setting latency timer to 64
    Mar 28 10:10:36 localhost kernel: ahci 0000:00:1f.2: setting latency timer to 64
    Mar 28 10:10:36 localhost kernel: snd_hda_intel 0000:02:00.1: irq 45 for MSI/MSI-X
    Mar 28 10:10:36 localhost kernel: r8169 0000:09:00.0: System wakeup disabled by ACPI
    Mar 28 10:10:36 localhost kernel: <6>[fglrx] Power up the ASIC
    Mar 28 10:10:36 localhost kernel: <6>[fglrx] Preparing resume fglrx in kernel.
    Mar 28 10:10:36 localhost kernel: Extended CMOS year: 2000
    Mar 28 10:10:36 localhost kernel: <6>[fglrx] Resuming fglrx in kernel completed.
    Mar 28 10:10:36 localhost kernel: <6>[fglrx] IRQ 46 Enabled
    Mar 28 10:10:36 localhost kernel: ata5: SATA link down (SStatus 0 SControl 300)
    Mar 28 10:10:36 localhost kernel: ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
    Mar 28 10:10:36 localhost kernel: ata2.00: configured for UDMA/100
    Mar 28 10:10:36 localhost kernel: usb 2-1.3: reset low-speed USB device number 3 using ehci-pci
    Mar 28 10:10:36 localhost kernel: sdhci-pci 0000:07:00.0: Will use DMA mode even though HW doesn't fully claim to support it.
    Mar 28 10:10:36 localhost kernel: firewire_core 0000:07:00.3: rediscovered device fw0
    Mar 28 10:10:36 localhost kernel: usb 1-1.4: reset high-speed USB device number 3 using ehci-pci
    Mar 28 10:10:36 localhost kernel: ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
    Mar 28 10:10:36 localhost kernel: ata1.00: configured for UDMA/133
    Mar 28 10:10:36 localhost kernel: sd 0:0:0:0: [sda] Starting disk
    Mar 28 10:10:36 localhost kernel: PM: resume of devices complete after 2478.795 msecs
    Mar 28 10:10:36 localhost kernel: PM: Finishing wakeup.
    Mar 28 10:10:36 localhost kernel: Restarting tasks ... done.
    Mar 28 10:10:36 localhost kernel: video LNXVIDEO:00: Restoring backlight state
    Mar 28 10:10:36 localhost slim[806]: Conky: can't open /sys/class/power_supply/BAT0/uevent: No such file or directory
    Mar 28 10:10:36 localhost slim[806]: Conky: can't open /proc/acpi/battery/BAT0/state: No such file or directory
    Mar 28 10:10:36 localhost systemd-sleep[4208]: System resumed.
    Mar 28 10:10:36 localhost dbus-daemon[800]: dbus[800]: [system] Activating via systemd: service name='org.freedesktop.UPower' unit='upower.service'
    Mar 28 10:10:36 localhost dbus[800]: [system] Activating via systemd: service name='org.freedesktop.UPower' unit='upower.service'
    Mar 28 10:10:36 localhost su[4307]: (to root) root on none
    Mar 28 10:10:36 localhost su[4307]: pam_unix(su:session): session opened for user root by (uid=0)
    Mar 28 10:10:36 localhost systemd[1]: Starting Daemon for power management...
    Mar 28 10:10:36 localhost su[4307]: pam_unix(su:session): session closed for user root
    Mar 28 10:10:36 localhost su[4328]: (to root) root on none
    Mar 28 10:10:36 localhost su[4328]: pam_unix(su:session): session opened for user root by (uid=0)
    Mar 28 10:10:36 localhost su[4328]: pam_unix(su:session): session closed for user root
    Mar 28 10:10:36 localhost systemd[1]: Started Suspend.
    Mar 28 10:10:36 localhost systemd[1]: Service sleep.target is not needed anymore. Stopping.
    Mar 28 10:10:36 localhost systemd[1]: Stopping Sleep.
    Mar 28 10:10:36 localhost systemd[1]: Stopped target Sleep.
    Mar 28 10:10:36 localhost systemd[1]: Starting Suspend.
    Mar 28 10:10:36 localhost systemd[1]: Reached target Suspend.
    Mar 28 10:10:36 localhost systemd-logind[796]: Operation finished.
    Mar 28 10:10:36 localhost laptop-mode[4441]: Laptop mode
    Mar 28 10:10:36 localhost laptop-mode[4446]: enabled, active [unchanged]
    Mar 28 10:10:36 localhost logger[4463]: ACPI action undefined: ACPI0003:00
    Mar 28 10:10:36 localhost laptop-mode[4501]: Laptop mode
    Mar 28 10:10:36 localhost laptop-mode[4509]: enabled, active [unchanged]
    Mar 28 10:10:36 localhost laptop-mode[4534]: Laptop mode
    Mar 28 10:10:36 localhost laptop-mode[4539]: enabled, active [unchanged]
    Mar 28 10:10:36 localhost laptop-mode[4554]: Laptop mode
    Mar 28 10:10:36 localhost laptop-mode[4557]: enabled, active [unchanged]
    Mar 28 10:10:36 localhost laptop-mode[4562]: Laptop mode
    Mar 28 10:10:36 localhost laptop-mode[4563]: enabled, active [unchanged]
    Mar 28 10:10:36 localhost dbus-daemon[800]: dbus[800]: [system] Successfully activated service 'org.freedesktop.UPower'
    Mar 28 10:10:36 localhost dbus[800]: [system] Successfully activated service 'org.freedesktop.UPower'
    Mar 28 10:10:36 localhost systemd[1]: Started Daemon for power management.
    Mar 28 10:10:37 localhost ntpd[1442]: Deleting interface #3 eth1, 192.168.1.6#123, interface stats: received=135, sent=135, dropped=1, active_time=4197 secs
    Mar 28 10:10:37 localhost ntpd[1442]: 149.156.70.60 interface 192.168.1.6 -> (none)
    Mar 28 10:10:37 localhost ntpd[1442]: 149.156.24.40 interface 192.168.1.6 -> (none)
    Mar 28 10:10:37 localhost ntpd[1442]: 46.250.172.2 interface 192.168.1.6 -> (none)
    Mar 28 10:10:37 localhost ntpd[1442]: peers refreshed
    Mar 28 10:10:38 localhost su[4624]: (to root) root on none
    Mar 28 10:10:38 localhost su[4624]: pam_unix(su:session): session opened for user root by (uid=0)
    Mar 28 10:10:38 localhost laptop-mode[4653]: Laptop mode
    Mar 28 10:10:38 localhost laptop-mode[4654]: enabled, active [unchanged]
    Mar 28 10:10:38 localhost dhcpcd[1435]: eth1: carrier acquired
    Mar 28 10:10:38 localhost dhcpcd[1435]: eth1: sending IPv6 Router Solicitation
    Mar 28 10:10:38 localhost dhcpcd[1435]: eth1: rebinding lease of 192.168.1.6
    Mar 28 10:10:38 localhost dhcpcd[1435]: eth1: acknowledged 192.168.1.6 from 192.168.1.1 `TP-LINK'
    Mar 28 10:10:38 localhost dhcpcd[1435]: eth1: checking for 192.168.1.6
    Mar 28 10:10:38 localhost su[4624]: pam_unix(su:session): session closed for user root
    Mar 28 10:10:38 localhost su[4660]: (to root) root on none
    Mar 28 10:10:38 localhost su[4660]: pam_unix(su:session): session opened for user root by (uid=0)
    Mar 28 10:10:38 localhost su[4660]: pam_unix(su:session): session closed for user root
    Mar 28 10:10:38 localhost kernel: EXT4-fs (sda6): re-mounted. Opts: commit=0
    Mar 28 10:10:38 localhost kernel: EXT4-fs (sda7): re-mounted. Opts: commit=0
    Mar 28 10:10:38 localhost laptop-mode[4694]: Laptop mode
    Mar 28 10:10:38 localhost laptop-mode[4695]: enabled, active [unchanged]
    Mar 28 10:10:38 localhost logger[4698]: ACPI action undefined: ACPI0003:00
    Mar 28 10:10:38 localhost slim[806]: tint2 : invalid option "task_margin",
    Mar 28 10:10:38 localhost slim[806]: upgrade tint2 or correct your config file
    Mar 28 10:10:38 localhost slim[806]: tint2 : nb monitor 1, nb monitor used 1, nb desktop 1
    Mar 28 10:10:38 localhost slim[806]: X Error of failed request: BadWindow (invalid Window parameter)
    Mar 28 10:10:38 localhost slim[806]: Major opcode of failed request: 21 (X_ListProperties)
    Mar 28 10:10:38 localhost slim[806]: Resource id in failed request: 0x18000b0
    Mar 28 10:10:38 localhost slim[806]: Serial number of failed request: 12
    Mar 28 10:10:38 localhost slim[806]: Current serial number in output stream: 12
    Mar 28 10:10:40 localhost slim[806]: you have no weather alerts
    Mar 28 10:10:40 localhost slim[806]: processing complete
    Mar 28 10:10:40 localhost slim[806]: gathering data with curl
    Mar 28 10:10:40 localhost slim[806]: % Total % Received % Xferd Average Speed Time Time Time Current
    Mar 28 10:10:40 localhost slim[806]: Dload Upload Total Spent Left Speed
    Mar 28 10:10:40 localhost slim[806]: 0 0 0 0 0 0 0 0 --:--:-- --:--:-- --:--:-- 0curl: (6) Could not resolve host: (nil); Unknown error
    Mar 28 10:10:40 localhost slim[806]: not checking for alerts
    Mar 28 10:10:40 localhost slim[806]: curl attempt timed out, trying again
    Mar 28 10:10:40 localhost slim[806]: % Total % Received % Xferd Average Speed Time Time Time Current
    Mar 28 10:10:40 localhost slim[806]: Dload Upload Total Spent Left Speed
    Mar 28 10:10:40 localhost slim[806]: 0 0 0 0 0 0 0 0 --:--:-- --:--:-- --:--:-- 0curl: (6) Could not resolve host: (nil); Unknown error
    Mar 28 10:10:42 localhost dhcpcd[1435]: eth1: sending IPv6 Router Solicitation
    Mar 28 10:10:43 localhost dhcpcd[1435]: eth1: leased 192.168.1.6 for 259200 seconds
    Mar 28 10:10:45 dhcppc4 ntpd[1442]: Listen normally on 6 eth1 192.168.1.6 UDP 123
    Mar 28 10:10:45 dhcppc4 ntpd[1442]: peers refreshed
    Mar 28 10:10:45 dhcppc4 ntpd[1442]: new interface(s) found: waking up resolver
    Mar 28 10:10:45 dhcppc4 slim[806]: Traceback (most recent call last):
    Mar 28 10:10:45 dhcppc4 slim[806]: File "/home/rlk120/.scripts/gmail.py", line 9, in <module>
    Mar 28 10:10:45 dhcppc4 slim[806]: msg=temp.read()
    Mar 28 10:10:45 dhcppc4 slim[806]: File "/usr/lib/python3.3/encodings/ascii.py", line 26, in decode
    Mar 28 10:10:45 dhcppc4 slim[806]: return codecs.ascii_decode(input, self.errors)[0]
    Mar 28 10:10:45 dhcppc4 slim[806]: UnicodeDecodeError: 'ascii' codec can't decode byte 0xc5 in position 375: ordinal not in range(128)
    Mar 28 10:10:45 dhcppc4 slim[806]: not checking for alerts
    Mar 28 10:10:45 dhcppc4 slim[806]: curl attempt timed out, trying again
    Mar 28 10:10:45 dhcppc4 slim[806]: % Total % Received % Xferd Average Speed Time Time Time Current
    Mar 28 10:10:45 dhcppc4 slim[806]: Dload Upload Total Spent Left Speed
    Mar 28 10:10:46 dhcppc4 slim[806]: [234B blob data]
    Mar 28 10:10:46 dhcppc4 dhcpcd[1435]: eth1: sending IPv6 Router Solicitation
    Mar 28 10:10:50 dhcppc4 dhcpcd[1435]: eth1: sending IPv6 Router Solicitation
    Mar 28 10:10:50 dhcppc4 dhcpcd[1435]: eth1: no IPv6 Routers available
    Mar 28 10:11:03 dhcppc4 slim[806]: No protocol specified
    Mar 28 10:11:03 dhcppc4 slim[806]: (chromium:4750): Gtk-WARNING **: cannot open display: :0.0
    Mar 28 10:11:31 dhcppc4 systemd-logind[796]: System is rebooting.
    Mar 28 10:11:32 dhcppc4 systemd[1]: Deactivating swap /dev/sda8...
    Mar 28 10:11:32 dhcppc4 systemd[1]: Deactivating swap /dev/sda8...
    Mar 28 10:11:32 dhcppc4 systemd[1]: Deactivating swap /dev/sda8...
    Mar 28 10:11:32 dhcppc4 systemd[1]: Stopping Sound Card.
    Mar 28 10:11:32 dhcppc4 systemd[1]: Stopped target Sound Card.
    Mar 28 10:11:32 dhcppc4 systemd[1]: Stopping Daemon for power management...
    Mar 28 10:11:32 dhcppc4 systemd[1]: Stopping Authorization Manager...
    Mar 28 10:11:32 dhcppc4 systemd[1]: Stopping Graphical Interface.
    Mar 28 10:11:32 dhcppc4 systemd[1]: Stopped target Graphical Interface.
    Mar 28 10:11:32 dhcppc4 systemd[1]: Stopping Multi-User.
    Mar 28 10:11:32 dhcppc4 systemd[1]: Stopped target Multi-User.
    Mar 28 10:11:32 dhcppc4 systemd[1]: Stopping ACPI event daemon...
    Mar 28 10:11:32 dhcppc4 ntpd[1442]: ntpd exiting on signal 15
    Mar 28 10:11:32 dhcppc4 acpid[793]: exiting
    Mar 28 10:11:32 dhcppc4 dhcpcd[4810]: sending signal 1 to pid 1435
    Mar 28 10:11:32 dhcppc4 dhcpcd[4810]: waiting for pid 1435 to exit
    Mar 28 10:11:32 dhcppc4 dhcpcd[1435]: received SIGHUP, releasing
    Mar 28 10:11:32 dhcppc4 dhcpcd[1435]: eth1: releasing lease of 192.168.1.6
    Mar 28 10:11:32 dhcppc4 dhcpcd[1435]: eth1: removing interface
    Mar 28 10:11:33 dhcppc4 slim[806]: Conky: received SIGHUP or SIGUSR1. reloading the config file.
    Mar 28 10:11:33 dhcppc4 slim[806]: XIO: fatal IO error 11 (Resource temporarily unavailable) on X server ":0.0"
    Mar 28 10:11:33 dhcppc4 slim[806]: after 200200 requests (200197 known processed) with 0 events remaining.
    Mar 28 10:11:33 dhcppc4 slim[806]: Conky: received SIGHUP or SIGUSR1. reloading the config file.
    Mar 28 10:11:33 dhcppc4 slim[806]: XIO: fatal IO error 4 (Interrupted system call) on X server ":0.0"
    Mar 28 10:11:33 dhcppc4 slim[806]: after 226 requests (226 known processed) with 0 events remaining.
    Mar 28 10:11:33 dhcppc4 slim[806]: real transparency off.... depth: 24
    Mar 28 10:11:33 dhcppc4 slim[806]: xRandr: Found crtc's: 4
    Mar 28 10:11:33 dhcppc4 slim[806]: xRandr: Linking output LVDS with crtc 0
    Mar 28 10:11:33 dhcppc4 slim[806]: real transparency off.... depth: 24
    Mar 28 10:11:33 dhcppc4 slim[806]: xRandr: Found crtc's: 4
    Mar 28 10:11:33 dhcppc4 slim[806]: xRandr: Linking output LVDS with crtc 0
    Mar 28 10:11:33 dhcppc4 slim[806]: XIO: fatal IO error 11 (Resource temporarily unavailable) on X server ":0.0"
    Mar 28 10:11:33 dhcppc4 slim[806]: after 534585 requests (534585 known processed) with 0 events remaining.
    Mar 28 10:11:33 dhcppc4 slim[806]: XIO: fatal IO error 11 (Resource temporarily unavailable) on X server ":0.0"
    Mar 28 10:11:33 dhcppc4 slim[806]: after 163909 requests (163909 known processed) with 0 events remaining.
    Mar 28 10:11:33 dhcppc4 slim[806]: you have no weather alerts
    Mar 28 10:11:33 dhcppc4 slim[806]: processing complete
    Mar 28 10:11:33 dhcppc4 kernel: cfg80211: Calling CRDA to update world regulatory domain
    Mar 28 10:11:33 dhcppc4 kernel: IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
    Mar 28 10:11:33 dhcppc4 netcfg-daemon[4777]: :: siec_domowa down [done]
    Mar 28 10:11:33 dhcppc4 slim[806]: Server terminated successfully (0). Closing log file.
    Mar 28 10:11:33 dhcppc4 laptop-mode[4865]: Laptop mode
    Mar 28 10:11:33 dhcppc4 laptop-mode[4866]: enabled, active [unchanged]
    Mar 28 10:11:34 dhcppc4 systemd[1]: slim.service: main process exited, code=exited, status=1/FAILURE
    Mar 28 10:11:34 dhcppc4 systemd[1]: Stopped SLiM Simple Login Manager.
    Mar 28 10:11:34 dhcppc4 systemd[1]: Unit slim.service entered failed state
    Mar 28 10:11:34 dhcppc4 systemd[1]: Stopping Permit User Sessions...
    Mar 28 10:11:34 dhcppc4 systemd[1]: Stopped Permit User Sessions.
    Mar 28 10:11:34 dhcppc4 systemd[1]: Stopping Basic System.
    Mar 28 10:11:34 dhcppc4 systemd[1]: Stopped target Basic System.
    Mar 28 10:11:34 dhcppc4 systemd[1]: Stopping Dispatch Password Requests to Console Directory Watch.
    Mar 28 10:11:34 dhcppc4 systemd[1]: Stopped Dispatch Password Requests to Console Directory Watch.
    Mar 28 10:11:34 dhcppc4 systemd[1]: Stopping Forward Password Requests to Wall Directory Watch.
    Mar 28 10:11:34 dhcppc4 systemd[1]: Stopped Forward Password Requests to Wall Directory Watch.
    Mar 28 10:11:34 dhcppc4 systemd[1]: Stopping Daily Cleanup of Temporary Directories.
    Mar 28 10:11:34 dhcppc4 systemd[1]: Stopped Daily Cleanup of Temporary Directories.
    Mar 28 10:11:34 dhcppc4 systemd[1]: Stopping Sockets.
    Mar 28 10:11:34 dhcppc4 systemd[1]: Stopped target Sockets.
    Mar 28 10:11:34 dhcppc4 systemd[1]: Stopping LVM2 metadata daemon socket.
    Mar 28 10:11:34 dhcppc4 systemd[1]: Closed LVM2 metadata daemon socket.
    Mar 28 10:11:34 dhcppc4 systemd[1]: Stopping Device-mapper event daemon FIFOs.
    Mar 28 10:11:34 dhcppc4 systemd[1]: Closed Device-mapper event daemon FIFOs.
    Mar 28 10:11:34 dhcppc4 systemd[1]: Stopping Syslog Socket.
    Mar 28 10:11:34 dhcppc4 systemd[1]: Closed Syslog Socket.
    Mar 28 10:11:34 dhcppc4 systemd[1]: Stopping ACPID Listen Socket.
    Mar 28 10:11:34 dhcppc4 systemd[1]: Closed ACPID Listen Socket.
    Mar 28 10:11:34 dhcppc4 systemd[1]: Stopping D-Bus System Message Bus Socket.
    Mar 28 10:11:34 dhcppc4 systemd[1]: Closed D-Bus System Message Bus Socket.
    Mar 28 10:11:34 dhcppc4 systemd[1]: Stopping System Initialization.
    Mar 28 10:11:34 dhcppc4 systemd[1]: Stopped target System Initialization.
    Mar 28 10:11:34 dhcppc4 systemd[1]: Stopping Load Kernel Modules...
    Mar 28 10:11:34 dhcppc4 systemd[1]: Stopped Load Kernel Modules.
    Mar 28 10:11:34 dhcppc4 systemd[1]: Stopping Apply Kernel Variables...
    Mar 28 10:11:34 dhcppc4 systemd[1]: Stopped Apply Kernel Variables.
    Mar 28 10:11:34 dhcppc4 systemd[1]: Stopping Setup Virtual Console...
    Mar 28 10:11:35 dhcppc4 systemd[1]: Stopped Setup Virtual Console.
    Mar 28 10:11:35 dhcppc4 systemd[1]: Stopping Set Up Additional Binary Formats...
    Mar 28 10:11:35 dhcppc4 systemd[1]: Stopped Set Up Additional Binary Formats.
    Mar 28 10:11:35 dhcppc4 systemd[1]: Stopping Encrypted Volumes.
    Mar 28 10:11:35 dhcppc4 systemd[1]: Stopped target Encrypted Volumes.
    Mar 28 10:11:35 dhcppc4 systemd[1]: Stopping Swap.
    Mar 28 10:11:35 dhcppc4 systemd[1]: Stopped target Swap.
    Mar 28 10:11:35 dhcppc4 systemd[1]: Stopping Local File Systems.
    Mar 28 10:11:35 dhcppc4 systemd[1]: Stopped target Local File Systems.
    Mar 28 10:11:35 dhcppc4 systemd[1]: Unmounting /home...
    Mar 28 10:11:35 dhcppc4 systemd[1]: Unmounting /tmp...
    Mar 28 10:11:35 dhcppc4 systemd[1]: Stopping Remote File Systems.
    Mar 28 10:11:35 dhcppc4 systemd[1]: Stopped target Remote File Systems.
    Mar 28 10:11:35 dhcppc4 systemd[1]: Unmounted /tmp.
    Mar 28 10:11:35 dhcppc4 systemd[1]: Unmounted /home.
    Mar 28 10:11:35 dhcppc4 systemd[1]: Starting Unmount All Filesystems.
    Mar 28 10:11:35 dhcppc4 systemd[1]: Reached target Unmount All Filesystems.
    Mar 28 10:11:35 dhcppc4 systemd[1]: Stopping Local File Systems (Pre).
    Mar 28 10:11:35 dhcppc4 systemd[1]: Stopped target Local File Systems (Pre).
    Mar 28 10:11:35 dhcppc4 systemd[1]: Stopping Remount Root and Kernel File Systems...
    Mar 28 10:11:35 dhcppc4 systemd[1]: Stopped Remount Root and Kernel File Systems.
    Mar 28 10:11:35 dhcppc4 systemd[1]: Starting Shutdown.
    Mar 28 10:11:35 dhcppc4 systemd[1]: Reached target Shutdown.
    Mar 28 10:11:35 dhcppc4 systemd[1]: Starting Save Random Seed...
    Mar 28 10:11:35 dhcppc4 systemd[1]: Starting Update UTMP about System Shutdown...
    Mar 28 10:11:35 dhcppc4 systemd[1]: Started Save Random Seed.
    Mar 28 10:11:35 dhcppc4 systemd[1]: Started Update UTMP about System Shutdown.
    Mar 28 10:11:35 dhcppc4 systemd[1]: Starting Final Step.
    Mar 28 10:11:35 dhcppc4 systemd[1]: Reached target Final Step.
    Mar 28 10:11:35 dhcppc4 systemd[1]: Starting Reboot...
    Mar 28 10:11:35 dhcppc4 systemd[1]: Shutting down.
    Mar 28 10:11:35 dhcppc4 systemd[1]: Hardware watchdog 'iTCO_wdt', version 0
    Mar 28 10:11:35 dhcppc4 systemd[1]: Set hardware watchdog to 10min.
    Mar 28 10:11:35 dhcppc4 kernel: watchdog watchdog0: watchdog did not stop!
    Mar 28 10:11:35 dhcppc4 systemd-journal[131]: Journal stopped
    Somebody probably find interesting things in this code.
    And here is some fail slim:
    # journalctl /usr/lib/systemd/systemd --since=today
    -- Logs begin at Mon 2012-09-10 20:20:07 CEST, end at Thu 2013-03-28 10:37:18 CET. --
    Mar 28 10:10:36 localhost systemd[1]: Time has been changed
    Mar 28 10:10:36 localhost systemd[1]: systemd-tmpfiles-clean.timer: time change, recalculating next elapse.
    Mar 28 10:10:36 localhost systemd[1]: Starting Daemon for power management...
    Mar 28 10:10:36 localhost systemd[1]: Started Suspend.
    Mar 28 10:10:36 localhost systemd[1]: Service sleep.target is not needed anymore. Stopping.
    Mar 28 10:10:36 localhost systemd[1]: Stopping Sleep.
    Mar 28 10:10:36 localhost systemd[1]: Stopped target Sleep.
    Mar 28 10:10:36 localhost systemd[1]: Starting Suspend.
    Mar 28 10:10:36 localhost systemd[1]: Reached target Suspend.
    Mar 28 10:10:36 localhost systemd[1]: Started Daemon for power management.
    Mar 28 10:11:32 dhcppc4 systemd[1]: Deactivating swap /dev/sda8...
    Mar 28 10:11:32 dhcppc4 systemd[1]: Deactivating swap /dev/sda8...
    Mar 28 10:11:32 dhcppc4 systemd[1]: Deactivating swap /dev/sda8...
    Mar 28 10:11:32 dhcppc4 systemd[1]: Stopping Sound Card.
    Mar 28 10:11:32 dhcppc4 systemd[1]: Stopped target Sound Card.
    Mar 28 10:11:32 dhcppc4 systemd[1]: Stopping Daemon for power management...
    Mar 28 10:11:32 dhcppc4 systemd[1]: Stopping Authorization Manager...
    Mar 28 10:11:32 dhcppc4 systemd[1]: Stopping Graphical Interface.
    Mar 28 10:11:32 dhcppc4 systemd[1]: Stopped target Graphical Interface.
    Mar 28 10:11:32 dhcppc4 systemd[1]: Stopping Multi-User.
    Mar 28 10:11:32 dhcppc4 systemd[1]: Stopped target Multi-User.
    Mar 28 10:11:32 dhcppc4 systemd[1]: Stopping ACPI event daemon...
    Mar 28 10:11:34 dhcppc4 systemd[1]: slim.service: main process exited, code=exited, status=1/FAILURE
    Mar 28 10:11:34 dhcppc4 systemd[1]: Stopped SLiM Simple Login Manager.
    Mar 28 10:11:34 dhcppc4 systemd[1]: Unit slim.service entered failed state
    Mar 28 10:11:34 dhcppc4 systemd[1]: Stopping Permit User Sessions...
    Mar 28 10:11:34 dhcppc4 systemd[1]: Stopped Permit User Sessions.
    Mar 28 10:11:34 dhcppc4 systemd[1]: Stopping Basic System.
    Mar 28 10:11:34 dhcppc4 systemd[1]: Stopped target Basic System.
    Mar 28 10:11:34 dhcppc4 systemd[1]: Stopping Dispatch Password Requests to Console Directory Watch.
    Mar 28 10:11:34 dhcppc4 systemd[1]: Stopped Dispatch Password Requests to Console Directory Watch.
    Mar 28 10:11:34 dhcppc4 systemd[1]: Stopping Forward Password Requests to Wall Directory Watch.
    Mar 28 10:11:34 dhcppc4 systemd[1]: Stopped Forward Password Requests to Wall Directory Watch.
    Mar 28 10:11:34 dhcppc4 systemd[1]: Stopping Daily Cleanup of Temporary Directories.
    Mar 28 10:11:34 dhcppc4 systemd[1]: Stopped Daily Cleanup of Temporary Directories.
    Mar 28 10:11:34 dhcppc4 systemd[1]: Stopping Sockets.
    Mar 28 10:11:34 dhcppc4 systemd[1]: Stopped target Sockets.
    Mar 28 10:11:34 dhcppc4 systemd[1]: Stopping LVM2 metadata daemon socket.
    Mar 28 10:11:34 dhcppc4 systemd[1]: Closed LVM2 metadata daemon socket.
    Mar 28 10:11:34 dhcppc4 systemd[1]: Stopping Device-mapper event daemon FIFOs.
    Mar 28 10:11:34 dhcppc4 systemd[1]: Closed Device-mapper event daemon FIFOs.
    Mar 28 10:11:34 dhcppc4 systemd[1]: Stopping Syslog Socket.
    Mar 28 10:11:34 dhcppc4 systemd[1]: Closed Syslog Socket.
    Mar 28 10:11:34 dhcppc4 systemd[1]: Stopping ACPID Listen Socket.
    Mar 28 10:11:34 dhcppc4 systemd[1]: Closed ACPID Listen Socket.
    Mar 28 10:11:34 dhcppc4 systemd[1]: Stopping D-Bus System Message Bus Socket.
    Mar 28 10:11:34 dhcppc4 systemd[1]: Closed D-Bus System Message Bus Socket.
    Mar 28 10:11:34 dhcppc4 systemd[1]: Stopping System Initialization.
    Mar 28 10:11:34 dhcppc4 systemd[1]: Stopped target System Initialization.
    Mar 28 10:11:34 dhcppc4 systemd[1]: Stopping Load Kernel Modules...
    Mar 28 10:11:34 dhcppc4 systemd[1]: Stopped Load Kernel Modules.
    Mar 28 10:11:34 dhcppc4 systemd[1]: Stopping Apply Kernel Variables...
    Mar 28 10:11:34 dhcppc4 systemd[1]: Stopped Apply Kernel Variables.
    Mar 28 10:11:34 dhcppc4 systemd[1]: Stopping Setup Virtual Console...
    Mar 28 10:11:35 dhcppc4 systemd[1]: Stopped Setup Virtual Console.
    Mar 28 10:11:35 dhcppc4 systemd[1]: Stopping Set Up Additional Binary Formats...
    Mar 28 10:11:35 dhcppc4 systemd[1]: Stopped Set Up Additional Binary Formats.
    Mar 28 10:11:35 dhcppc4 systemd[1]: Stopping Encrypted Volumes.
    Mar 28 10:11:35 dhcppc4 systemd[1]: Stopped target Encrypted Volumes.
    Mar 28 10:11:35 dhcppc4 systemd[1]: Stopping Swap.
    Mar 28 10:11:35 dhcppc4 systemd[1]: Stopped target Swap.
    Mar 28 10:11:35 dhcppc4 systemd[1]: Stopping Local File Systems.
    Mar 28 10:11:35 dhcppc4 systemd[1]: Stopped target Local File Systems.
    Mar 28 10:11:35 dhcppc4 systemd[1]: Unmounting /home...
    Mar 28 10:11:35 dhcppc4 systemd[1]: Unmounting /tmp...
    Mar 28 10:11:35 dhcppc4 systemd[1]: Stopping Remote File Systems.
    Mar 28 10:11:35 dhcppc4 systemd[1]: Stopped target Remote File Systems.
    Mar 28 10:11:35 dhcppc4 systemd[1]: Unmounted /tmp.
    Mar 28 10:11:35 dhcppc4 systemd[1]: Unmounted /home.
    Mar 28 10:11:35 dhcppc4 systemd[1]: Starting Unmount All Filesystems.
    Mar 28 10:11:35 dhcppc4 systemd[1]: Reached target Unmount All Filesystems.
    Mar 28 10:11:35 dhcppc4 systemd[1]: Stopping Local File Systems (Pre).
    Mar 28 10:11:35 dhcppc4 systemd[1]: Stopped target Local File Systems (Pre).
    Mar 28 10:11:35 dhcppc4 systemd[1]: Stopping Remount Root and Kernel File Systems...
    Mar 28 10:11:35 dhcppc4 systemd[1]: Stopped Remount Root and Kernel File Systems.
    Mar 28 10:11:35 dhcppc4 systemd[1]: Starting Shutdown.
    Mar 28 10:11:35 dhcppc4 systemd[1]: Reached target Shutdown.
    Mar 28 10:11:35 dhcppc4 systemd[1]: Starting Save Random Seed...
    Mar 28 10:11:35 dhcppc4 systemd[1]: Starting Update UTMP about System Shutdown...
    Mar 28 10:11:35 dhcppc4 systemd[1]: Started Save Random Seed.
    Mar 28 10:11:35 dhcppc4 systemd[1]: Started Update UTMP about System Shutdown.
    Mar 28 10:11:35 dhcppc4 systemd[1]: Starting Final Step.
    Mar 28 10:11:35 dhcppc4 systemd[1]: Reached target Final Step.
    Mar 28 10:11:35 dhcppc4 systemd[1]: Starting Reboot...
    Mar 28 10:11:35 dhcppc4 systemd[1]: Shutting down.
    Mar 28 10:11:35 dhcppc4 systemd[1]: Hardware watchdog 'iTCO_wdt', version 0
    Mar 28 10:11:35 dhcppc4 systemd[1]: Reached target Unmount All Filesystems.
    Mar 28 10:11:35 dhcppc4 systemd[1]: Stopping Local File Systems (Pre).
    Mar 28 10:11:35 dhcppc4 systemd[1]: Stopped target Local File Systems (Pre).
    Mar 28 10:11:35 dhcppc4 systemd[1]: Stopping Remount Root and Kernel File Systems...
    Mar 28 10:11:35 dhcppc4 systemd[1]: Stopped Remount Root and Kernel File Systems.
    Mar 28 10:11:35 dhcppc4 systemd[1]: Starting Shutdown.
    Mar 28 10:11:35 dhcppc4 systemd[1]: Reached target Shutdown.
    Mar 28 10:11:35 dhcppc4 systemd[1]: Starting Save Random Seed...
    Mar 28 10:11:35 dhcppc4 systemd[1]: Starting Update UTMP about System Shutdown...
    Mar 28 10:11:35 dhcppc4 systemd[1]: Started Save Random Seed.
    Mar 28 10:11:35 dhcppc4 systemd[1]: Started Update UTMP about System Shutdown.
    Mar 28 10:11:35 dhcppc4 systemd[1]: Starting Final Step.
    Mar 28 10:11:35 dhcppc4 systemd[1]: Reached target Final Step.
    Mar 28 10:11:35 dhcppc4 systemd[1]: Starting Reboot...
    Mar 28 10:11:35 dhcppc4 systemd[1]: Shutting down.
    Mar 28 10:11:35 dhcppc4 systemd[1]: Hardware watchdog 'iTCO_wdt', version 0
    Mar 28 10:11:35 dhcppc4 systemd[1]: Set hardware watchdog to 10min.
    Last edited by xorgx3 (2013-03-28 10:52:08)

  • Strange behavior in audio editing

    Greetings,  I am working on a progect in logic x and am suddenly having difficulty editing audio.  There is behaviour that I do not understatnd-  If I use the trim tool, other regions move (I am editing a large piece, using group to edit all regions at the same time).  Also after an edit, there is audio playing from some previous edit or from a track that is overlapped or something?  I have toggled the overlap/ no overlap function and have been working with shuffle modes, but now it seems strange.  Do I have something set differently or wrong I wonder.
    Thanks for the help!
    cheers---

    I did a quick (and dirty) fix for this, but it has one problem. After this handler has blocked the submit, you can only enter edit mode using the edit-button at ribbon. Edit button at upper right corner stops to work for some reason. After site refresh everything
    works again, so not a major issue.
    <script>
    // SharePoint input element bug handler
    // More bug: http://social.technet.microsoft.com/Forums/sharepoint/en-US/33df42ba-00b3-41a8-8fb9-f8187cfc216d/strange-behavior-in-firefox-input-text-with-enter-opens-page-for-editing?forum=sharepointgeneralprevious
    // This fix stops form submit => blocks transfer to edit mode
    var disableFormSubmitDueToBug = false;
    var bugSubmitHandlerAttached = false;
    $('*selector for inputs here*').keydown(function(e){
    if(e.keyCode == 13 ) { 
      disableFormSubmitDueToBug = true;
      bindBugSubmitHandler();
    } else {
      unbindBugSubmitHandler();
    }).focusout(function(){
    unbindBugSubmitHandler();
    function bindBugSubmitHandler(){
    $( "form" ).bind("submit", function( e ) {
    if(disableFormSubmitDueToBug) {
    e.preventDefault();
    console.log('Blocked submit by SP bug handler');
    bugSubmitHandlerAttached = true;
    function unbindBugSubmitHandler(){
    if(bugSubmitHandlerAttached){
    $( "form" ).unbind("submit");
    bugSubmitHandlerAttached = false;
    console.log('SP bug submit handler unbind occurred');
    </script>
    Thank you SO much for writing this script. It worked for me.
    Where the code says: $('*selector for inputs here*').keydown(function(e){
    You need to replace *selector or inputs here* with the name of your input box, so for me it was:
    $("input[name^='client_name']").keydown(function(e){

  • Strange behavior scrolling LongListSelector - WP8

    I have an app where I save the user's contacts in a local Database, then bind this contacts in a LongListSelector.
    The app has a button that,, when clicked, update the local database (make it
    identical to the devide).
    When there is changes, the LongListSelector has a strange behavior after return from search to the list (view): when I scroll fast or after some time scrolling, a blank space appears in the middle of the list. Then I found out that, apparently, the list
    is cutting some items...
    This behavior happens only when I have a long list, like 50 items or more..
    I bind the items on LongListSelector this way:
    XAML:
    <Grid x:Name="ContentPanelContatos" Grid.Row="1" Margin="0" VerticalAlignment="Stretch" HorizontalAlignment="Stretch" >
    <Grid x:Name="gridContatos" Grid.Row="1" Margin="12,2,12,0" HorizontalAlignment="Stretch" VerticalAlignment="Stretch" >
    <Grid.RowDefinitions>
    <RowDefinition Height="Auto"/>
    <RowDefinition Height="*"/>
    </Grid.RowDefinitions>
    <Grid Grid.Row="0" Margin="0,0,0,12" >
    <TextBox x:Name="tbxSearch" VerticalAlignment="Top" HorizontalAlignment="Stretch" Visibility="Collapsed" TextChanged="TbxSearch_TextChanged" LostFocus="TbxSearch_LostFocus" Style="{StaticResource TextBoxStyle}" />
    </Grid>
    <phone:LongListSelector Grid.Row="1" x:Name="llsContacts" ItemsSource="{Binding}" SelectionChanged="llsContacts_SelectionChanged" >
    <phone:LongListSelector.ItemTemplate>
    <DataTemplate>
    <ListBoxItem local:TiltEffect.IsTiltEnabled="true">
    <Grid Margin="0,0,0,10" >
    <TextBlock Text="{Binding NAME, Mode=TwoWay}" FontFamily="Segoe WP" FontSize="28" Margin="77,0,0,0" />
    <TextBlock Text="{Binding Path=NUMBER, Mode=TwoWay}" FontFamily="Segoe WP Light" FontSize="17" Margin="77,33,0,0"/>
    </Grid>
    </ListBoxItem>
    </DataTemplate>
    </phone:LongListSelector.ItemTemplate>
    </phone:LongListSelector>
    </Grid>
    <!-- more 2 grids with contents -->
    </Grid>
    I was binding the items using ObservableCollection and I was having this problem.. Then I tried to erase the list and bind it again (after the search) this way:
    if (llsContacts.ItemsSource != null)
    llsContacts.ItemsSource.Clear();
    llsContacts.DataContext = daoRd.GetData();
    But I'm still with this problem...
    Does anybody can tell me what is happening?
    Am I doing something wrong?
    Reading this article:
    Frame rate counters in Windows Phone, I noticed that when this problem happens, some of the numbers that are on the side of the screen when debugging, stops changing...
    They stops like this:
    User Interface Thread FPS: 000
    Texture Memory Usage: 007181
    Surface Counter: 050
    Intermediate Texture Counter: 002
    Does this numbers means something?

    have you dumped the contents of what is returned from daoRD.GetData()?   Could be one of the items in the collection has blank strings?   Also I noticed you clear the ItemsSource before setting the DataContext.  That is probably
    not necessary if you are setting the DataContext immediately after that.
    Bret Bentzinger (MSFT) @awehellyeah

  • Strange behavior while plugged in

    Hi,
    my X1 compact shows a strange behavior since yesterday:
    I plugged it in via the USB port for charging, and it started doing crazy things. Screen brightness went flashing from low to high and back, the touchscreen showed slow or no response to pushing buttons, everything got laggy as if some kind of process was running in the background with no end. When I unplug it, it basically works normally. But - from this time on, I couldn't charge it anymore, as the charge went down instead of up when plugged in! I tried a factory reset several times (power + volume up for 3 seconds), and although it did reset, the charging problem remained. I left it turned off for one night while plugged in, and in the morning, it was just charged to 25% with the charge going down rapidly in the first couple of minutes (after 5 minutes to 11%). Now it's at 1%, but I can use it for quite a while, indicating that the displayed charge certainly isn't correct.
    When I plug it in, the same things happen again and again. When plugged in, I can't even enter the PIN correctly, because touchscreen input is somehow recognized falsely.
    What could that be, what could I do??
    Aleks

    I'd like to, but... now it's gone from 1% to dead, and I can't bring it back to life, whether plugged in or not!
    When it's plugged in, the red charging light doesn't even come up. When I hard reset it, it just vibrates as it should, but no charging light whatsoever. When I unplug it and try to start it, the red light just flashes three times.
    Now I'll just try to leave it plugged in for some time, in hope that there will be enough charge to try to boot into safe mode.
    But to me, it seems like some kind of hardware bug? I mean, it seems like the same problen bothers the phone even when it's shut down, so I wouldn't gess it's a problem with the apps or the system! But I just don't get why it worked all the time and then just suddenly this thing happens! I've had it now for 6 weeks, and I already had a similar problem on the second day already, but it went away with a hard reset while charging... after that, perfect charging and good battery life for 6 weeks!
    Regards,
    Aleks

  • Strange behavior when "trying" to burn a disk.

    At least I think this is strange behavior, following the instructions in the help viewer, topic "Backing up your music to a CD or DVD." One thing for sure, it's not burning a disc and it ain't telling me why.
    I select the playlist and click "Burn Disc"
    Requests a blank disc. I insert one.
    Message "checking media"
    after about a minute, the disc ejects
    Message "checking media" displays another 30 seconds
    No other messages displayed.
    What the ??? Shouldn't it at least display an error message??
    Super-Drive information..... from System Profiler
    MATSHITA DVD-R UJ-845C:
    Firmware Revision: DPP9
    Interconnect: ATAPI
    Burn Support: Yes (Apple Shipped/Supported)
    Cache: 2048 KB
    Reads DVD: Yes
    CD-Write: -R, -RW
    DVD-Write: -R, -RW, +R, +RW
    Burn Underrun Protection CD: Yes
    Burn Underrun Protection DVD: Yes
    Write Strategies: CD-TAO, CD-SAO, DVD-DAO
    Media: No
    Using Sony DVD+R discs.
    Mac Mini   Mac OS X (10.4.8)  

    Whoops, sorry, this was while burning a playlist.
    I've also tried some Pleomax CD disks (Samsung), with no luck. I've tried burning directly from iTunes, and from Toast 7.
    Of the types I've tried, the Sony DVD's have been the best for me. Haven't tried many types though. Maybe I can get disks one at a time until I find a brand my burner likes.
    Still, isn't it strange that there is NO error message? It just quits?
    Mac Mini   Mac OS X (10.4.8)  

  • Strange Behavior with gMSA in Server 2012 R2

    Greetings,
    I have been doing some testing with gMSA Accounts in a Server 2012 R2 environment (two separate environments, actually), and I have noticed something very strange that occurred in both environments, which does not appear to be occurring in one of our customer's
    self-managed environments.
    We created a Group Managed Service Account using the following article:
    http://blogs.technet.com/b/askpfeplat/archive/2012/12/17/windows-server-2012-group-managed-service-accounts.aspx
    Everything went smoothly, and the account installs/tests successfully on both of the hosts that we are testing on. I am able to set my services to run under the account, and most of them appear to work fine. I am having some issues with a few of my services,
    and I believe that the strange behavior I am seeing may have something to do with this - described below: 
    As soon as I set the service's Log On Account (via the Log On Tab under the Service's Properties), the entirety of the "Log On" tab changes to "greyed out," and I am unable to change the Log On account back via the GUI (Screenshot
    attached).
    I found that I am able to successfully change the account via Command Line using sc.exe, but the Log On tab remains greyed out! So far, I have found nothing to remedy this, but confirmed that it happens for any service I set to use the gMSA as the Logon
    Account, and that it happens in 2 separate test environments, but not in a Customer's production environment - very strange.
    All servers in this environment are running Server 2012 R2, and domain Functional Level is currently Server 2012.
    I have been unable to find any information online about this behavior, so I am hoping someone has seen this before, and can explain why this is happening.
    Nick

    VIvian,
    Yes, we used the Install-AdServiceAccount gMSA command on each host using the gMSA account, and then ran Test-AdServiceAccount gMSA, which returned "True."
    However, one thing I noticed is that if I run Test-ADServiceAccount gMSA as a Local Administrator, it fails with the following:
    PS C:\Users\Administrator> Test-AdServiceAccount gMSA$
    Test-AdServiceAccount : The server has rejected the client credentials.
    At line:1 char:1
    + Test-AdServiceAccount gMSA$
    + ~~~~~~~~~~~~~~~~~~~~~~~~~~~
        + CategoryInfo          : SecurityError: (:) [Test-ADServiceAccount], AuthenticationException
        + FullyQualifiedErrorId : ActiveDirectoryCmdlet:System.Security.Authentication.AuthenticationException,Microsoft.A
       ctiveDirectory.Management.Commands.TestADServiceAccount
    If I run Test-ADServiceAccount gMSA as Domain Administrator, it returns true:
    PS C:\Users\Administrator.<domainname>> Test-AdServiceAccount gMSA$
    True
    Is this normal?
    Overall, I think the issue I am running into is at the Application Level, and not a problem with the gMSA, as it appears to be working. (Can Start/Stop services without any issues). I will be investigating my issue further with 3rd-party vendors, unless
    you think there is something wrong with my gMSA accounts based on the information I have provided.
    Nick

  • Strange Behavior from iTunes 7.2

    Running itunes - 7.2Recently had my itunes library “corrupted” or non functional.
    Spent a long, long time rebuilding the library (see below) and noticed some strange behavior that has me terrified that itunes is corrupted and I am going to loose all the hard work, etc..
    1. I have about 100 GB of music in various formats (apple protected/itunes store, mp3 (128 to 320), apple lossless, wav) and when I tried to rebuild the library by clicking on add to library it only added about 65 GB of the 100 GB. I had to go through and figure out what was missing and manually choose the specific folder when I added it.
    Major pain and very time consuming.
    So it is not adding songs correctly, but through way too much effort able to work around this.
    2. About ½ of the itunes store tunes I purchased are no longer apple protected format. Somehow they were converted to mp3 at 192kbs. Some of the songs play fine others are now not as crisp and make a poping sound or skip. How could this happen? Are these files corrupted? Will I loose them?
    3. At the top center of itunes the information bar, where the read out is for what song is playing and how much time has elapsed in the song, is not working. When I click on a song it starts playing but the elapsed time bar and counter never move, and when the next song starts playing the information never changes. It is stuck on what ever song you initiate play with by clicking on it and the information stays frozen.
    4. itunes randomly stops playing at the end of a song….If listening to an album it is usually after three or four songs and when listening to a play list it is usually after one song.
    I am afraid itunes is corrupted and will not function correctly and I am going to loose the hard work I put in trying to recover from the last crash.
    Any suggestions??
    Can’t wait for time machine. I hope it works as advertised. If so I could just go back in time to the last time iTunes worked correctly and go from there.

    First of all I hope that you have a good b/u of all your tunes - either on ext HD or on DVD. Don't forget to b/u the iTunes Library and .xml files at the same time.
    Have you tried to reinstall iTunes? Drag the app to the trash and remove the iTunesX.pkg from HD>Library>Receipts>iTunesX.pkg. Using a fresh .dmg of iTunes 7.2 reinstall.
    Have you repaired permissions with Disk Utility?
    Is your Quicktime up to date? At least version v7.1.5.
    MJ

Maybe you are looking for

  • OS 10.4.10 incompatibility with Crucial Ballistix RAM?

    I have two 1 GB Crucial Ballistix RAM modules in my G5 1.8 Dual processor, in addition to the two 512 MB modules that came with the computer. Everything was working fine until I recently upgraded to OS 10.4.10. At that point, the two 1GB modules were

  • Acrobat 9.0 Runtime Error Vista SBS 2003 Folder Redirection Issue

    I just got off of a two hour phone call with Adobe. They are unable to resolve my issue. After installing Acrobat 9.0, we receive the following error: "Microsoft Visual C++ Debug Library Runtime Error! Program: C:\Program Files\Adobe\Acrobat 9.0\Acro

  • Slow loading Finder in Mavericks?

    I bought the brand new Macbook Pro Retina that came with Mavericks plus I upgraded my old Macbook Pro Retina to Mavericks before my new one came. On both computers I am noticing a few different things that are rather annoying. When attaching document

  • I want to buy iPhone 4 on-line

    hi, sorry i'm a newbie. i'm from Philippines and I want to order it abroad. i checked the website and it says iphone 4 can be sold from $199. my question is, if i want to order and ship it to Philippines, what would be the exact price? sorry, because

  • Symbol disappear from stage after being created from an image

    Ok, first, I'm a beginner with Edge here, So I might be missing some obvious solution. I want to create a button. I simply change an image to symbol (as I want to animate the buttons). Once I do that and test it in preview, the symbol is gone. It nev