802.1x Windows 2012 IAS

Hello I´m trying to setup 802.1x on an old 3560 switch.
The Switch is a:
Switch   Ports  Model              SW Version              SW Image
*    1   52     WS-C3560-48TS      12.2(25)SEE3            C3560-ADVIPSERVICESK
I´m using Windows 2012 IAS as RADIUS with the following policies:
I have the folling config on the switch:
aaa group server radius RadiusAuth
server 172.29.8.12 auth-port 1645 acct-port 1646
aaa authentication login default local
aaa authentication login local enable
aaa authentication dot1x default group RadiusAuth
aaa authorization network default group RadiusAuth
dot1x system-auth-control
interface FastEthernet0/31
description 802.1x tests
switchport mode access
dot1x pae authenticator
dot1x port-control auto
dot1x timeout quiet-period 3
dot1x timeout tx-period 5
dot1x guest-vlan 106
spanning-tree portfast
radius-server host 172.29.8.12 auth-port 1645 acct-port 1646
radius-server retry method reorder
radius-server transaction max-tries 10
radius-server timeout 4
radius-server deadtime 2
radius-server key KEYSECRET
radius-server vsa send authentication
And I cant authenticate , I think it is a RADIUS problem.
I have this aditional debug info related with RADIUS and Dot1x:
004898: Aug  5 12:32:28: %LINK-3-UPDOWN: Interface FastEthernet0/31, changed state to down
004899: 7w6d: RADIUS(00000019): Storing nasport 50031 in rad_db
004900: 7w6d: RADIUS(00000019): Config NAS IP: 0.0.0.0
004901: 7w6d: RADIUS/ENCODE(00000019): acct_session_id: 27787264
004902: 7w6d: RADIUS(00000019): sending
004903: 7w6d: RADIUS/ENCODE: Best Local IP-Address 172.29.11.1 for Radius-Server 172.29.8.12
004904: 7w6d: RADIUS(00000019): Send Access-Request to 172.29.8.12:1645 id 21645/77, len 173
004905: 7w6d: RADIUS:  authenticator A7 3A 07 F8 8D 5B C1 76 - 67 8E 66 54 05 04 0C DB
004906: 7w6d: RADIUS:  User-Name           [1]   19  "DOMAIN\User"
004907: 7w6d: RADIUS:  Service-Type        [6]   6   Framed                    [2]
004908: 7w6d: RADIUS:  Framed-MTU          [12]  6   1500
004909: 7w6d: RADIUS:  Called-Station-Id   [30]  19  "00-17-94-97-D9-23"
004910: 7w6d: RADIUS:  Calling-Station-Id  [31]  19  "00-24-BE-C7-09-6F"
004911: 7w6d: RADIUS:  EAP-Message         [79]  24
004912: 7w6d: RADIUS:   02 02 00 16 01 44 49 47 49 54 41 49 4E 45 52 5C  [?????DOMAIN\]
004913: 7w6d: RADIUS:   6F 6C 6F 70 65 7A                                [USER]
004914: 7w6d: RADIUS:  Message-Authenticato[80]  18
004915: 7w6d: RADIUS:   31 C9 68 BA B8 E9 DC 78 6E 87 7E A4 89 D5 0C 81  [1?h????xn?~?????]
004916: 7w6d: RADIUS:  Vendor, Cisco       [26]  24
004917: 7w6d: RADIUS:   cisco-nas-port     [2]   18  "FastEthernet0/31"
004918: 7w6d: RADIUS:  NAS-Port            [5]   6   50031
004919: 7w6d: RADIUS:  NAS-Port-Type       [61]  6   Eth                       [15]
004920: 7w6d: RADIUS:  NAS-IP-Address      [4]   6   172.29.11.1
004921: Aug  5 12:32:32: %LINK-3-UPDOWN: Interface FastEthernet0/31, changed state to up
004922: 7w6d: RADIUS: Retransmit to (172.29.8.12:1645,1646) for id 21645/77
004923: 7w6d: RADIUS: Retransmit to (172.29.8.12:1645,1646) for id 21645/77
004924: 7w6d: RADIUS: Retransmit to (172.29.8.12:1645,1646) for id 21645/77
004925: 7w6d: RADIUS: Retransmit to (172.29.8.12:1645,1646) for id 21645/77
004926: 7w6d: RADIUS(00000019): Storing nasport 50031 in rad_db
004927: 7w6d: RADIUS(00000019): Config NAS IP: 0.0.0.0
004928: 7w6d: RADIUS/ENCODE(00000019): acct_session_id: 27787264
004929: 7w6d: RADIUS(00000019): sending
004930: 7w6d: RADIUS/ENCODE: Best Local IP-Address 172.29.11.1 for Radius-Server 172.29.8.12
004931: 7w6d: RADIUS(00000019): Send Access-Request to 172.29.8.12:1645 id 21645/78, len 173
004932: 7w6d: RADIUS:  authenticator 84 B1 75 9D 4C 21 0F 9D - 19 01 A6 23 DE 1B 74 1A
004933: 7w6d: RADIUS:  User-Name           [1]   19  "DOMAIN\User"
004934: 7w6d: RADIUS:  Service-Type        [6]   6   Framed                    [2]
004935: 7w6d: RADIUS:  Framed-MTU          [12]  6   1500
004936: 7w6d: RADIUS:  Called-Station-Id   [30]  19  "00-17-94-97-D9-23"
004937: 7w6d: RADIUS:  Calling-Station-Id  [31]  19  "00-24-BE-C7-09-6F"
004938: 7w6d: RADIUS:  EAP-Message         [79]  24
004939: 7w6d: RADIUS:   02 03 00 16 01 44 49 47 49 54 41 49 4E 45 52 5C  [?????DDOMAIN\]
004940: 7w6d: RADIUS:   6F 6C 6F 70 65 7A                                [User]
004941: 7w6d: RADIUS:  Message-Authenticato[80]  18
004942: 7w6d: RADIUS:   D3 1E DC 03 5E 13 CF 93 6B 7F F4 B8 DB 20 65 A6  [????^???k???? e?]
004943: 7w6d: RADIUS:  Vendor, Cisco       [26]  24
004944: 7w6d: RADIUS:   cisco-nas-port     [2]   18  "FastEthernet0/31"
004945: 7w6d: RADIUS:  NAS-Port            [5]   6   50031
004946: 7w6d: RADIUS:  NAS-Port-Type       [61]  6   Eth                       [15]
004947: 7w6d: RADIUS:  NAS-IP-Address      [4]   6   172.29.11.1
004948: 7w6d: RADIUS: Retransmit to (172.29.8.12:1645,1646) for id 21645/77
004949: 7w6d: RADIUS: Retransmit to (172.29.8.12:1645,1646) for id 21645/78
004950: 7w6d: RADIUS: Retransmit to (172.29.8.12:1645,1646) for id 21645/77
004951: 7w6d: RADIUS: Retransmit to (172.29.8.12:1645,1646) for id 21645/78
004952: 7w6d: RADIUS: Retransmit to (172.29.8.12:1645,1646) for id 21645/77
004953: Aug  5 12:33:04: %RADIUS-4-RADIUS_DEAD: RADIUS server 172.29.8.12:1645,1646 is not responding.
004954: 7w6d: RADIUS: Retransmit to (172.29.8.12:1645,1646) for id 21645/78
004955: 7w6d: RADIUS: Retransmit to (172.29.8.12:1645,1646) for id 21645/77
004956: 7w6d: RADIUS: Retransmit to (172.29.8.12:1645,1646) for id 21645/78
004957: 7w6d: RADIUS: Retransmit to (172.29.8.12:1645,1646) for id 21645/77
004958: 7w6d: RADIUS: Retransmit to (172.29.8.12:1645,1646) for id 21645/78
004959: 7w6d: RADIUS: No response from (172.29.8.12:1645,1646) for id 21645/77
004960: 7w6d: RADIUS/DECODE: parse response no app start; FAIL
004961: 7w6d: RADIUS/DECODE: parse response; FAIL
004962: 7w6d: RADIUS: Retransmit to (172.29.8.12:1645,1646) for id 21645/78
004963: 7w6d: RADIUS: Retransmit to (172.29.8.12:1645,1646) for id 21645/78
004964: 7w6d: RADIUS: Retransmit to (172.29.8.12:1645,1646) for id 21645/78
004965: 7w6d: RADIUS: Retransmit to (172.29.8.12:1645,1646) for id 21645/78
004966: 7w6d: RADIUS: No response from (172.29.8.12:1645,1646) for id 21645/78
004967: 7w6d: RADIUS/DECODE: parse response no app start; FAIL
004968: 7w6d: RADIUS/DECODE: parse response; FAIL
004969: Aug  5 12:35:04: %RADIUS-4-RADIUS_ALIVE: RADIUS server 172.29.8.12:1645,1646 has returned.
DOT1X
005294: 7w6d: dot1x-ev:dot1x_switch_is_dot1x_forwarding_enabled: Forwarding is disabled on Fa0/31
005295: 7w6d: dot1x-registry:dot1x_switch_port_linkcomingup invoked on interface Fa0/31
005296: 7w6d: dot1x-ev:dot1x_mgr_if_state_change: FastEthernet0/31 has changed to UP
005297: 7w6d:     dot1x_auth Fa0: initial state auth_initialize has enter
005298: 7w6d: dot1x-sm:Fa0/31:0000.0000.0000:auth_initialize_enter called
005299: 7w6d:     dot1x_auth Fa0: during state auth_initialize, got event 0(cfg_auto)
005300: 7w6d: @@@ dot1x_auth Fa0: auth_initialize -> auth_disconnected
005301: 7w6d: dot1x-sm:Fa0/31:0000.0000.0000:auth_disconnected_enter called
005302: 7w6d:     dot1x_auth Fa0: idle during state auth_disconnected
005303: 7w6d: @@@ dot1x_auth Fa0: auth_disconnected -> auth_restart
005304: 7w6d: dot1x-sm:Fa0/31:0000.0000.0000:auth_restart_enter called
005305: 7w6d: dot1x-ev:Sending create new context event to EAP for 0000.0000.0000
005306: 7w6d:     dot1x_auth_bend Fa0: initial state auth_bend_initialize has enter
005307: 7w6d: dot1x-sm:Fa0/31:0000.0000.0000:auth_bend_initialize_enter called
005308: 7w6d:     dot1x_auth_bend Fa0: initial state auth_bend_initialize has idle
005309: 7w6d:     dot1x_auth_bend Fa0: during state auth_bend_initialize, got event 16383(idle)
005310: 7w6d: @@@ dot1x_auth_bend Fa0: auth_bend_initialize -> auth_bend_idle
005311: 7w6d: dot1x-sm:Fa0/31:0000.0000.0000:auth_bend_idle_enter called
005312: 7w6d: dot1x-ev:Created a client entry for the supplicant 0000.0000.0000
005313: 7w6d: dot1x-ev:Created a default authenticator instance on FastEthernet0/31
005314: 7w6d: dot1x-ev:dot1x_switch_enable_on_port:  Enabling dot1x on interface FastEthernet0/31
005315: 7w6d: dot1x-ev:dot1x_switch_enable_on_port: set dot1x ask handler on interface FastEthernet0/31
005316: 7w6d: dot1x-sm:Posting !EAP_RESTART on Client=39E7F78
005317: 7w6d:     dot1x_auth Fa0: during state auth_restart, got event 6(no_eapRestart)
005318: 7w6d: @@@ dot1x_auth Fa0: auth_restart -> auth_connecting
005319: 7w6d: dot1x-sm:Fa0/31:0000.0000.0000:auth_connecting_enter called
005320: 7w6d: dot1x-sm:Fa0/31:0000.0000.0000:auth_restart_connecting_action called
005321: 7w6d: dot1x-packet:Received an EAP request packet from EAP for mac 0000.0000.0000
005322: 7w6d: dot1x-sm:Posting RX_REQ on Client=39E7F78
005323: 7w6d:     dot1x_auth Fa0: during state auth_connecting, got event 10(eapReq_no_reAuthMax)
005324: 7w6d: @@@ dot1x_auth Fa0: auth_connecting -> auth_authenticating
005325: 7w6d: dot1x-sm:Fa0/31:0000.0000.0000:auth_authenticating_enter called
005326: 7w6d: dot1x-sm:Fa0/31:0000.0000.0000:auth_connecting_authenticating_action called
005327: 7w6d: dot1x-sm:Posting AUTH_START on Client=39E7F78
005328: 7w6d:     dot1x_auth_bend Fa0: during state auth_bend_idle, got event 4(eapReq_authStart)
005329: 7w6d: @@@ dot1x_auth_bend Fa0: auth_bend_idle -> auth_bend_request
005330: 7w6d: dot1x-sm:Fa0/31:0000.0000.0000:auth_bend_request_enter called
005331: 7w6d: dot1x-packet:dot1x_mgr_send_eapol :EAP code: 0x1  id: 0x2  length: 0x0005 type: 0x1  data:
005332: 7w6d: dot1x-ev:FastEthernet0/31:Sending EAPOL packet to group PAE address
005333: 7w6d: dot1x-ev:dot1x_mgr_pre_process_eapol_pak: Role determination not required on FastEthernet0/31.
005334: 7w6d: dot1x-registry:registry:dot1x_ether_macaddr called
005335: 7w6d: dot1x-ev:dot1x_mgr_send_eapol: Sending out EAPOL packet on FastEthernet0/31
005336: 7w6d: EAPOL pak dump Tx
005337: 7w6d: EAPOL Version: 0x2  type: 0x0  length: 0x0005
005338: 7w6d: EAP code: 0x1  id: 0x2  length: 0x0005 type: 0x1
005339: 7w6d: dot1x-packet:dot1x_txReq: EAPOL packet sent out for the default authenticator
005340: 7w6d: dot1x-sm:Fa0/31:0000.0000.0000:auth_bend_idle_request_action called
005341: 7w6d: dot1x-ev:dot1x_mgr_pre_process_eapol_pak: Role determination not required on FastEthernet0/31.
005342: 7w6d: dot1x-packet:dot1x_mgr_process_eapol_pak: queuing an EAPOL pkt on Authenticator Q
005343: 7w6d: dot1x-ev:Enqueued the eapol packet to the global authenticator queue
005344: 7w6d: dot1x-packet:Received an EAPOL frame on interface FastEthernet0/31
005345: 7w6d: dot1x-ev:Received pkt saddr =0024.bec7.096f , daddr = 0180.c200.0003,
                    pae-ether-type = 888e.0100.0016
005346: 7w6d: dot1x-ev:Created a client entry for the supplicant 0024.bec7.096f
005347: 7w6d: dot1x-ev:Found the default authenticator instance on FastEthernet0/31
005348: 7w6d: dot1x-registry:EAPOL traffic seen on FastEthernet0/31
005349: 7w6d: dot1x-packet:Received an EAP packet on interface FastEthernet0/31
005350: 7w6d: EAPOL pak dump rx
005351: 7w6d: EAPOL Version: 0x1  type: 0x0  length: 0x0016
005352: 7w6d: dot1x-packet:Received an EAP packet on the FastEthernet0/31 from mac 0024.bec7.096f
005353: 7w6d: dot1x-sm:Posting EAPOL_EAP on Client=39E7F78
005354: 7w6d:     dot1x_auth_bend Fa0: during state auth_bend_request, got event 6(eapolEap)
005355: 7w6d: @@@ dot1x_auth_bend Fa0: auth_bend_request -> auth_bend_response
005356: 7w6d: dot1x-sm:Fa0/31:0024.bec7.096f:auth_bend_response_enter called
005357: 7w6d: dot1x-ev:dot1x_sendRespToServer: Response sent to the server from 0024.bec7.096f
005358: 7w6d: dot1x-sm:Fa0/31:0024.bec7.096f:auth_bend_request_response_action called
005359: Aug  5 12:39:28: %LINK-3-UPDOWN: Interface FastEthernet0/31, changed state to up
005360: 7w6d: dot1x-ev:dot1x_mgr_pre_process_eapol_pak: Role determination not required on FastEthernet0/31.
005361: 7w6d: dot1x-packet:dot1x_mgr_process_eapol_pak: queuing an EAPOL pkt on Authenticator Q
005362: 7w6d: dot1x-ev:Enqueued the eapol packet to the global authenticator queue
005363: 7w6d: dot1x-packet:Received an EAPOL frame on interface FastEthernet0/31
005364: 7w6d: dot1x-ev:Received pkt saddr =0024.bec7.096f , daddr = 0180.c200.0003,
                    pae-ether-type = 888e.0101.0000
005365: 7w6d: dot1x-packet:Received an EAPOL-Start packet on interface FastEthernet0/31
005366: 7w6d: EAPOL pak dump rx
005367: 7w6d: EAPOL Version: 0x1  type: 0x1  length: 0x0000
005368: 7w6d: dot1x-sm:Posting EAPOL_START on Client=39E7F78
005369: 7w6d:     dot1x_auth Fa0: during state auth_authenticating, got event 4(eapolStart)
005370: 7w6d: @@@ dot1x_auth Fa0: auth_authenticating -> auth_aborting
005371: 7w6d: dot1x-sm:Fa0/31:0024.bec7.096f:auth_authenticating_exit called
005372: 7w6d: dot1x-sm:Fa0/31:0024.bec7.096f:auth_aborting_enter called
005373: 7w6d: dot1x-sm:Posting AUTH_ABORT on Client=39E7F78
005374: 7w6d:     dot1x_auth_bend Fa0: during state auth_bend_response, got event 1(authAbort)
005375: 7w6d: @@@ dot1x_auth_bend Fa0: auth_bend_response -> auth_bend_initialize
005376: 7w6d: dot1x-sm:Fa0/31:0024.bec7.096f:auth_bend_response_exit called
005377: 7w6d: dot1x-sm:Fa0/31:0024.bec7.096f:auth_bend_initialize_enter called
005378: 7w6d:     dot1x_auth_bend Fa0: idle during state auth_bend_initialize
005379: 7w6d: @@@ dot1x_auth_bend Fa0: auth_bend_initialize -> auth_bend_idle
005380: 7w6d: dot1x-sm:Fa0/31:0024.bec7.096f:auth_bend_idle_enter called
005381: 7w6d: dot1x-sm:Posting !AUTH_ABORT on Client=39E7F78
005382: 7w6d:     dot1x_auth Fa0: during state auth_aborting, got event 20(no_eapolLogoff_no_authAbort)
005383: 7w6d: @@@ dot1x_auth Fa0: auth_aborting -> auth_restart
005384: 7w6d: dot1x-sm:Fa0/31:0024.bec7.096f:auth_aborting_exit called
005385: 7w6d: dot1x-sm:Fa0/31:0024.bec7.096f:auth_restart_enter called
005386: 7w6d: dot1x-ev:Resetting the client 0024.bec7.096f
005387: 7w6d: dot1x-sm:Fa0/31:0024.bec7.096f:auth_aborting_restart_action called
005388: 7w6d: dot1x-sm:Posting !EAP_RESTART on Client=39E7F78
005389: 7w6d:     dot1x_auth Fa0: during state auth_restart, got event 6(no_eapRestart)
005390: 7w6d: @@@ dot1x_auth Fa0: auth_restart -> auth_connecting
005391: 7w6d: dot1x-sm:Fa0/31:0024.bec7.096f:auth_connecting_enter called
005392: 7w6d: dot1x-sm:Fa0/31:0024.bec7.096f:auth_restart_connecting_action called
005393: 7w6d: dot1x-packet:Received an EAP request packet from EAP for mac 0024.bec7.096f
005394: 7w6d: dot1x-sm:Posting RX_REQ on Client=39E7F78
005395: 7w6d:     dot1x_auth Fa0: during state auth_connecting, got event 10(eapReq_no_reAuthMax)
005396: 7w6d: @@@ dot1x_auth Fa0: auth_connecting -> auth_authenticating
005397: 7w6d: dot1x-sm:Fa0/31:0024.bec7.096f:auth_authenticating_enter called
005398: 7w6d: dot1x-sm:Fa0/31:0024.bec7.096f:auth_connecting_authenticating_action called
005399: 7w6d: dot1x-sm:Posting AUTH_START on Client=39E7F78
005400: 7w6d:     dot1x_auth_bend Fa0: during state auth_bend_idle, got event 4(eapReq_authStart)
005401: 7w6d: @@@ dot1x_auth_bend Fa0: auth_bend_idle -> auth_bend_request
005402: 7w6d: dot1x-sm:Fa0/31:0024.bec7.096f:auth_bend_request_enter called
005403: 7w6d: dot1x-packet:dot1x_mgr_send_eapol :EAP code: 0x1  id: 0x3  length: 0x0005 type: 0x1  data:
005404: 7w6d: dot1x-ev:FastEthernet0/31:Sending EAPOL packet to group PAE address
005405: 7w6d: dot1x-ev:dot1x_mgr_pre_process_eapol_pak: Role determination not required on FastEthernet0/31.
005406: 7w6d: dot1x-registry:registry:dot1x_ether_macaddr called
005407: 7w6d: dot1x-ev:dot1x_mgr_send_eapol: Sending out EAPOL packet on FastEthernet0/31
005408: 7w6d: EAPOL pak dump Tx
005409: 7w6d: EAPOL Version: 0x2  type: 0x0  length: 0x0005
005410: 7w6d: EAP code: 0x1  id: 0x3  length: 0x0005 type: 0x1
005411: 7w6d: dot1x-packet:dot1x_txReq: EAPOL packet sent to client (0024.bec7.096f)
005412: 7w6d: dot1x-sm:Fa0/31:0024.bec7.096f:auth_bend_idle_request_action called
005413: 7w6d: dot1x-ev:dot1x_mgr_pre_process_eapol_pak: Role determination not required on FastEthernet0/31.
005414: 7w6d: dot1x-packet:dot1x_mgr_process_eapol_pak: queuing an EAPOL pkt on Authenticator Q
005415: 7w6d: dot1x-ev:Enqueued the eapol packet to the global authenticator queue
005416: 7w6d: dot1x-packet:Received an EAPOL frame on interface FastEthernet0/31
005417: 7w6d: dot1x-ev:Received pkt saddr =0024.bec7.096f , daddr = 0180.c200.0003,
                    pae-ether-type = 888e.0100.0016
005418: 7w6d: dot1x-packet:Received an EAP packet on interface FastEthernet0/31
005419: 7w6d: EAPOL pak dump rx
005420: 7w6d: EAPOL Version: 0x1  type: 0x0  length: 0x0016
005421: 7w6d: dot1x-packet:Received an EAP packet on the FastEthernet0/31 from mac 0024.bec7.096f
005422: 7w6d: dot1x-sm:Posting EAPOL_EAP on Client=39E7F78
005423: 7w6d:     dot1x_auth_bend Fa0: during state auth_bend_request, got event 6(eapolEap)
005424: 7w6d: @@@ dot1x_auth_bend Fa0: auth_bend_request -> auth_bend_response
005425: 7w6d: dot1x-sm:Fa0/31:0024.bec7.096f:auth_bend_response_enter called
005426: 7w6d: dot1x-ev:dot1x_sendRespToServer: Response sent to the server from 0024.bec7.096f
005427: 7w6d: dot1x-sm:Fa0/31:0024.bec7.096f:auth_bend_request_response_action called
005428: 7w6d: dot1x-sm:Posting A_WHILE_EXPIRE on Client=39E7F78
005429: 7w6d:     dot1x_auth_bend Fa0: during state auth_bend_response, got event 9(aWhile_expire)
005430: 7w6d: @@@ dot1x_auth_bend Fa0: auth_bend_response -> auth_bend_timeout
005431: 7w6d: dot1x-sm:Fa0/31:0024.bec7.096f:auth_bend_response_exit called
005432: 7w6d: dot1x-sm:Fa0/31:0024.bec7.096f:auth_bend_timeout_enter called
005433: 7w6d: dot1x-sm:Fa0/31:0024.bec7.096f:auth_bend_response_timeout_action called
005434: 7w6d:     dot1x_auth_bend Fa0: idle during state auth_bend_timeout
005435: 7w6d: @@@ dot1x_auth_bend Fa0: auth_bend_timeout -> auth_bend_idle
005436: 7w6d: dot1x-sm:Fa0/31:0024.bec7.096f:auth_bend_idle_enter called
005437: 7w6d: dot1x-sm:Posting AUTH_TIMEOUT on Client=39E7F78
005438: 7w6d:     dot1x_auth Fa0: during state auth_authenticating, got event 14(authTimeout)
005439: 7w6d: @@@ dot1x_auth Fa0: auth_authenticating -> auth_fallback
005440: 7w6d: dot1x-sm:Fa0/31:0024.bec7.096f:auth_authenticating_exit called
005441: 7w6d: dot1x-sm:Fa0/31:0024.bec7.096f:auth_fallback_enter called
005442: 7w6d: dot1x-sm:Posting AUTH_FAIL on Client=39E7F78
005443: 7w6d:     dot1x_auth Fa0: during state auth_fallback, got event 15(authFail)
005444: 7w6d: @@@ dot1x_auth Fa0: auth_fallback -> auth_authc_result
005445: 7w6d: dot1x-sm:Fa0/31:0024.bec7.096f:auth_authc_result_enter called
005446: 7w6d: dot1x-ev:dot1x_guest_vlan_applicable: Guest VLAN not applicable.  Supplicant disabled and EAPOL seen on port FastEthernet0/31.
005447: 7w6d: dot1x-sm:Posting AUTHC_FAIL on Client=39E7F78
005448: 7w6d:     dot1x_auth Fa0: during state auth_authc_result, got event 23(authcFail)
005449: 7w6d: @@@ dot1x_auth Fa0: auth_authc_result -> auth_held
005450: 7w6d: dot1x-ev:dot1x_guest_vlan_applicable: Guest VLAN not applicable.  Supplicant disabled and EAPOL seen on port FastEthernet0/31.
005451: 7w6d: dot1x-sm:Posting RESTART on Client=39E7F78
005452: 7w6d:     dot1x_auth Fa0: during state auth_held, got event 13(restart)
005453: 7w6d: @@@ dot1x_auth Fa0: auth_held -> auth_restart
005454: 7w6d: dot1x-sm:Fa0/31:0024.bec7.096f:auth_held_exit called
005455: 7w6d: dot1x-sm:Fa0/31:0024.bec7.096f:auth_restart_enter called
005456: 7w6d: dot1x-ev:Resetting the client 0024.bec7.096f
005457: 7w6d: dot1x-sm:Posting !EAP_RESTART on Client=39E7F78
005458: 7w6d:     dot1x_auth Fa0: during state auth_restart, got event 6(no_eapRestart)
005459: 7w6d: @@@ dot1x_auth Fa0: auth_restart -> auth_connecting
005460: 7w6d: dot1x-sm:Fa0/31:0024.bec7.096f:auth_connecting_enter called
005461: 7w6d: dot1x-sm:Fa0/31:0024.bec7.096f:auth_restart_connecting_action called
005462: 7w6d: dot1x-packet:Received an EAP request packet from EAP for mac 0024.bec7.096f
005463: 7w6d: dot1x-sm:Posting REAUTH_MAX on Client=39E7F78
005464: 7w6d:     dot1x_auth Fa0: during state auth_connecting, got event 11(reAuthMax)
005465: 7w6d: @@@ dot1x_auth Fa0: auth_connecting -> auth_disconnected
005466: 7w6d: dot1x-sm:Fa0/31:0024.bec7.096f:auth_disconnected_enter called
005467: 7w6d: dot1x-sm:Fa0/31:0024.bec7.096f:auth_disconnected_enter sending canned failure to version 1 supplicant
005468: 7w6d: dot1x-packet:dot1x_mgr_send_eapol :EAP code: 0x4  id: 0x4  length: 0x0004 type: 0x0  data:
005469: 7w6d: dot1x-ev:FastEthernet0/31:Sending EAPOL packet to group PAE address
005470: 7w6d: dot1x-ev:dot1x_mgr_pre_process_eapol_pak: Role determination not required on FastEthernet0/31.
005471: 7w6d: dot1x-registry:registry:dot1x_ether_macaddr called
005472: 7w6d: dot1x-ev:dot1x_mgr_send_eapol: Sending out EAPOL packet on FastEthernet0/31
005473: 7w6d: EAPOL pak dump Tx
005474: 7w6d: EAPOL Version: 0x2  type: 0x0  length: 0x0004
005475: 7w6d: EAP code: 0x4  id: 0x4  length: 0x0004
005476: 7w6d: dot1x-packet:dot1x_auth_txCannedFail: EAPOL packet sent to client (0024.bec7.096f)
005477: 7w6d:     dot1x_auth Fa0: idle during state auth_disconnected
005478: 7w6d: @@@ dot1x_auth Fa0: auth_disconnected -> auth_restart
005479: 7w6d: dot1x-ev:dot1x_switch_port_unauthorized: Unauthorizing interface FastEthernet0/31
005480: 7w6d: dot1x-ev:dot1x_switch_is_dot1x_forwarding_enabled: Forwarding is disabled on Fa0/31
005481: 7w6d: dot1x-ev:dot1x_vlan_assign_client_deleted on interface FastEthernet0/31
005482: 7w6d:     dot1x_auth Fa0: initial state auth_initialize has enter
005483: 7w6d: dot1x-sm:Fa0/31:0000.0000.0000:auth_initialize_enter called
005484: 7w6d:     dot1x_auth Fa0: during state auth_initialize, got event 0(cfg_auto)
005485: 7w6d: @@@ dot1x_auth Fa0: auth_initialize -> auth_disconnected
005486: 7w6d: dot1x-sm:Fa0/31:0000.0000.0000:auth_disconnected_enter called
005487: 7w6d:     dot1x_auth Fa0: idle during state auth_disconnected
005488: 7w6d: @@@ dot1x_auth Fa0: auth_disconnected -> auth_restart
005489: 7w6d: dot1x-sm:Fa0/31:0000.0000.0000:auth_restart_enter called
005490: 7w6d: dot1x-ev:Sending create new context event to EAP for 0000.0000.0000
005491: 7w6d:     dot1x_auth_bend Fa0: initial state auth_bend_initialize has enter
005492: 7w6d: dot1x-sm:Fa0/31:0000.0000.0000:auth_bend_initialize_enter called
005493: 7w6d:     dot1x_auth_bend Fa0: initial state auth_bend_initialize has idle
005494: 7w6d:     dot1x_auth_bend Fa0: during state auth_bend_initialize, got event 16383(idle)
005495: 7w6d: @@@ dot1x_auth_bend Fa0: auth_bend_initialize -> auth_bend_idle
005496: 7w6d: dot1x-sm:Fa0/31:0000.0000.0000:auth_bend_idle_enter called
005497: 7w6d: dot1x-ev:Created a client entry for the supplicant 0000.0000.0000
005498: 7w6d: dot1x-ev:Created a default authenticator instance on FastEthernet0/31
005499: 7w6d: dot1x-sm:Posting !EAP_RESTART on Client=39E7F78
005500: 7w6d:     dot1x_auth Fa0: during state auth_restart, got event 6(no_eapRestart)
005501: 7w6d: @@@ dot1x_auth Fa0: auth_restart -> auth_connecting
005502: 7w6d: dot1x-sm:Fa0/31:0000.0000.0000:auth_connecting_enter called
005503: 7w6d: dot1x-sm:Fa0/31:0000.0000.0000:auth_restart_connecting_action called
005504: Aug  5 12:40:17: %RADIUS-4-RADIUS_ALIVE: RADIUS server 172.29.8.12:1645,1646 has returned.
005505: 7w6d: dot1x-ev:dot1x_critical_active_state_change: Critical Auth Active state changed to FALSE
005506: 7w6d: dot1x-packet:Received an EAP request packet from EAP for mac 0000.0000.0000
005507: 7w6d: dot1x-sm:Posting RX_REQ on Client=39E7F78
005508: 7w6d:     dot1x_auth Fa0: during state auth_connecting, got event 10(eapReq_no_reAuthMax)
005509: 7w6d: @@@ dot1x_auth Fa0: auth_connecting -> auth_authenticating
005510: 7w6d: dot1x-sm:Fa0/31:0000.0000.0000:auth_authenticating_enter called
005511: 7w6d: dot1x-sm:Fa0/31:0000.0000.0000:auth_connecting_authenticating_action called
005512: 7w6d: dot1x-sm:Posting AUTH_START on Client=39E7F78
005513: 7w6d:     dot1x_auth_bend Fa0: during state auth_bend_idle, got event 4(eapReq_authStart)
005514: 7w6d: @@@ dot1x_auth_bend Fa0: auth_bend_idle -> auth_bend_request
005515: 7w6d: dot1x-sm:Fa0/31:0000.0000.0000:auth_bend_request_enter called
005516: 7w6d: dot1x-packet:dot1x_mgr_send_eapol :EAP code: 0x1  id: 0x2  length: 0x0005 type: 0x1  data:
005517: 7w6d: dot1x-ev:FastEthernet0/31:Sending EAPOL packet to group PAE address
005518: 7w6d: dot1x-ev:dot1x_mgr_pre_process_eapol_pak: Role determination not required on FastEthernet0/31.
005519: 7w6d: dot1x-registry:registry:dot1x_ether_macaddr called
005520: 7w6d: dot1x-ev:dot1x_mgr_send_eapol: Sending out EAPOL packet on FastEthernet0/31
005521: 7w6d: EAPOL pak dump Tx
005522: 7w6d: EAPOL Version: 0x2  type: 0x0  length: 0x0005
005523: 7w6d: EAP code: 0x1  id: 0x2  length: 0x0005 type: 0x1
005524: 7w6d: dot1x-packet:dot1x_txReq: EAPOL packet sent out for the default authenticator
005525: 7w6d: dot1x-sm:Fa0/31:0000.0000.0000:auth_bend_idle_request_action called
005526: 7w6d: dot1x-packet:Received an EAP request packet from EAP for mac 0000.0000.0000
005527: 7w6d: dot1x-sm:Posting EAP_REQ on Client=39E7F78
005528: 7w6d:     dot1x_auth_bend Fa0: during state auth_bend_request, got event 7(eapReq)
005529: 7w6d: @@@ dot1x_auth_bend Fa0: auth_bend_request -> auth_bend_request
005530: 7w6d: dot1x-sm:Fa0/31:0000.0000.0000:auth_bend_request_request_action called
005531: 7w6d: dot1x-sm:Fa0/31:0000.0000.0000:auth_bend_request_enter called
005532: 7w6d: dot1x-packet:dot1x_mgr_send_eapol :EAP code: 0x1  id: 0x2  length: 0x0005 type: 0x1  data:
005533: 7w6d: dot1x-ev:FastEthernet0/31:Sending EAPOL packet to group PAE address
005534: 7w6d: dot1x-ev:dot1x_mgr_pre_process_eapol_pak: Role determination not required on FastEthernet0/31.
005535: 7w6d: dot1x-registry:registry:dot1x_ether_macaddr called
005536: 7w6d: dot1x-ev:dot1x_mgr_send_eapol: Sending out EAPOL packet on FastEthernet0/31
005537: 7w6d: EAPOL pak dump Tx
005538: 7w6d: EAPOL Version: 0x2  type: 0x0  length: 0x0005
005539: 7w6d: EAP code: 0x1  id: 0x2  length: 0x0005 type: 0x1
005540: 7w6d: dot1x-packet:dot1x_txReq: EAPOL packet sent out for the default authenticator
005541: 7w6d: dot1x-packet:Received an EAP request packet from EAP for mac 0000.0000.0000
005542: 7w6d: dot1x-sm:Posting EAP_REQ on Client=39E7F78
005543: 7w6d:     dot1x_auth_bend Fa0: during state auth_bend_request, got event 7(eapReq)
005544: 7w6d: @@@ dot1x_auth_bend Fa0: auth_bend_request -> auth_bend_request
005545: 7w6d: dot1x-sm:Fa0/31:0000.0000.0000:auth_bend_request_request_action called
005546: 7w6d: dot1x-sm:Fa0/31:0000.0000.0000:auth_bend_request_enter called
005547: 7w6d: dot1x-packet:dot1x_mgr_send_eapol :EAP code: 0x1  id: 0x2  length: 0x0005 type: 0x1  data:
005548: 7w6d: dot1x-ev:FastEthernet0/31:Sending EAPOL packet to group PAE address
005549: 7w6d: dot1x-ev:dot1x_mgr_pre_process_eapol_pak: Role determination not required on FastEthernet0/31.
005550: 7w6d: dot1x-registry:registry:dot1x_ether_macaddr called
005551: 7w6d: dot1x-ev:dot1x_mgr_send_eapol: Sending out EAPOL packet on FastEthernet0/31
005552: 7w6d: EAPOL pak dump Tx
005553: 7w6d: EAPOL Version: 0x2  type: 0x0  length: 0x0005
005554: 7w6d: EAP code: 0x1  id: 0x2  length: 0x0005 type: 0x1
005555: 7w6d: dot1x-packet:dot1x_txReq: EAPOL packet sent out for the default authenticator
005556: 7w6d: dot1x-ev:Received an EAP Timeout on FastEthernet0/31 for mac 0000.0000.0000
005557: 7w6d: dot1x-sm:Posting EAP_TIMEOUT on Client=39E7F78
005558: 7w6d:     dot1x_auth_bend Fa0: during state auth_bend_request, got event 12(eapTimeout)
005559: 7w6d: @@@ dot1x_auth_bend Fa0: auth_bend_request -> auth_bend_timeout
005560: 7w6d: dot1x-sm:Fa0/31:0000.0000.0000:auth_bend_timeout_enter called
005561: 7w6d: dot1x-sm:Fa0/31:0000.0000.0000:auth_bend_request_timeout_action called
005562: 7w6d:     dot1x_auth_bend Fa0: idle during state auth_bend_timeout
005563: 7w6d: @@@ dot1x_auth_bend Fa0: auth_bend_timeout -> auth_bend_idle
005564: 7w6d: dot1x-sm:Fa0/31:0000.0000.0000:auth_bend_idle_enter called
005565: 7w6d: dot1x-sm:Posting AUTH_TIMEOUT on Client=39E7F78
005566: 7w6d:     dot1x_auth Fa0: during state auth_authenticating, got event 14(authTimeout)
005567: 7w6d: @@@ dot1x_auth Fa0: auth_authenticating -> auth_fallback
005568: 7w6d: dot1x-sm:Fa0/31:0000.0000.0000:auth_authenticating_exit called
005569: 7w6d: dot1x-sm:Fa0/31:0000.0000.0000:auth_fallback_enter called
005570: 7w6d: dot1x-sm:Posting AUTH_FAIL on Client=39E7F78
005571: 7w6d:     dot1x_auth Fa0: during state auth_fallback, got event 15(authFail)
005572: 7w6d: @@@ dot1x_auth Fa0: auth_fallback -> auth_authc_result
005573: 7w6d: dot1x-sm:Fa0/31:0000.0000.0000:auth_authc_result_enter called
005574: 7w6d: dot1x-ev:dot1x_guest_vlan_applicable: Guest VLAN not applicable.  Supplicant disabled and EAPOL seen on port FastEthernet0/31.
005575: 7w6d: dot1x-sm:Posting AUTHC_FAIL on Client=39E7F78
005576: 7w6d:     dot1x_auth Fa0: during state auth_authc_result, got event 23(authcFail)
005577: 7w6d: @@@ dot1x_auth Fa0: auth_authc_result -> auth_held
005578: 7w6d: dot1x-ev:dot1x_guest_vlan_applicable: Guest VLAN not applicable.  Supplicant disabled and EAPOL seen on port FastEthernet0/31.
005579: 7w6d: dot1x-sm:Posting RESTART on Client=39E7F78
005580: 7w6d:     dot1x_auth Fa0: during state auth_held, got event 13(restart)
005581: 7w6d: @@@ dot1x_auth Fa0: auth_held -> auth_restart
005582: 7w6d: dot1x-sm:Fa0/31:0000.0000.0000:auth_held_exit called
005583: 7w6d: dot1x-sm:Fa0/31:0000.0000.0000:auth_restart_enter called
005584: 7w6d: dot1x-ev:Resetting the client 0000.0000.0000
005585: 7w6d: dot1x-sm:Posting !EAP_RESTART on Client=39E7F78
005586: 7w6d:     dot1x_auth Fa0: during state auth_restart, got event 6(no_eapRestart)
005587: 7w6d: @@@ dot1x_auth Fa0: auth_restart -> auth_connecting
005588: 7w6d: dot1x-sm:Fa0/31:0000.0000.0000:auth_connecting_enter called
005589: 7w6d: dot1x-sm:Fa0/31:0000.0000.0000:auth_restart_connecting_action called
005590: 7w6d: dot1x-packet:Received an EAP request packet from EAP for mac 0000.0000.0000
005591: 7w6d: dot1x-sm:Posting RX_REQ on Client=39E7F78
005592: 7w6d:     dot1x_auth Fa0: during state auth_connecting, got event 10(eapReq_no_reAuthMax)
005593: 7w6d: @@@ dot1x_auth Fa0: auth_connecting -> auth_authenticating
005594: 7w6d: dot1x-sm:Fa0/31:0000.0000.0000:auth_authenticating_enter called
005595: 7w6d: dot1x-sm:Fa0/31:0000.0000.0000:auth_connecting_authenticating_action called
005596: 7w6d: dot1x-sm:Posting AUTH_START on Client=39E7F78
005597: 7w6d:     dot1x_auth_bend Fa0: during state auth_bend_idle, got event 4(eapReq_authStart)
005598: 7w6d: @@@ dot1x_auth_bend Fa0: auth_bend_idle -> auth_bend_request
005599: 7w6d: dot1x-sm:Fa0/31:0000.0000.0000:auth_bend_request_enter called
005600: 7w6d: dot1x-packet:dot1x_mgr_send_eapol :EAP code: 0x1  id: 0x3  length: 0x0005 type: 0x1  data:
005601: 7w6d: dot1x-ev:FastEthernet0/31:Sending EAPOL packet to group PAE address
005602: 7w6d: dot1x-ev:dot1x_mgr_pre_process_eapol_pak: Role determination not required on FastEthernet0/31.
005603: 7w6d: dot1x-registry:registry:dot1x_ether_macaddr called
005604: 7w6d: dot1x-ev:dot1x_mgr_send_eapol: Sending out EAPOL packet on FastEthernet0/31
005605: 7w6d: EAPOL pak dump Tx
005606: 7w6d: EAPOL Version: 0x2  type: 0x0  length: 0x0005
005607: 7w6d: EAP code: 0x1  id: 0x3  length: 0x0005 type: 0x1
005608: 7w6d: dot1x-packet:dot1x_txReq: EAPOL packet sent out for the default authenticator
005609: 7w6d: dot1x-sm:Fa0/31:0000.0000.0000:auth_bend_idle_request_action called
005610: 7w6d: dot1x-packet:Received an EAP request packet from EAP for mac 0000.0000.0000
005611: 7w6d: dot1x-sm:Posting EAP_REQ on Client=39E7F78
005612: 7w6d:     dot1x_auth_bend Fa0: during state auth_bend_request, got event 7(eapReq)
005613: 7w6d: @@@ dot1x_auth_bend Fa0: auth_bend_request -> auth_bend_request
005614: 7w6d: dot1x-sm:Fa0/31:0000.0000.0000:auth_bend_request_request_action called
005615: 7w6d: dot1x-sm:Fa0/31:0000.0000.0000:auth_bend_request_enter called
005616: 7w6d: dot1x-packet:dot1x_mgr_send_eapol :EAP code: 0x1  id: 0x3  length: 0x0005 type: 0x1  data:
005617: 7w6d: dot1x-ev:FastEthernet0/31:Sending EAPOL packet to group PAE address
005618: 7w6d: dot1x-ev:dot1x_mgr_pre_process_eapol_pak: Role determination not required on FastEthernet0/31.
005619: 7w6d: dot1x-registry:registry:dot1x_ether_macaddr called
005620: 7w6d: dot1x-ev:dot1x_mgr_send_eapol: Sending out EAPOL packet on FastEthernet0/31
005621: 7w6d: EAPOL pak dump Tx
005622: 7w6d: EAPOL Version: 0x2  type: 0x0  length: 0x0005
005623: 7w6d: EAP code: 0x1  id: 0x3  length: 0x0005 type: 0x1
005624: 7w6d: dot1x-packet:dot1x_txReq: EAPOL packet sent out for the default authenticator
005625: 7w6d: dot1x-packet:Received an EAP request packet from EAP for mac 0000.0000.0000
005626: 7w6d: dot1x-sm:Posting EAP_REQ on Client=39E7F78
005627: 7w6d:     dot1x_auth_bend Fa0: during state auth_bend_request, got event 7(eapReq)
005628: 7w6d: @@@ dot1x_auth_bend Fa0: auth_bend_request -> auth_bend_request
005629: 7w6d: dot1x-sm:Fa0/31:0000.0000.0000:auth_bend_request_request_action called
005630: 7w6d: dot1x-sm:Fa0/31:0000.0000.0000:auth_bend_request_enter called
005631: 7w6d: dot1x-packet:dot1x_mgr_send_eapol :EAP code: 0x1  id: 0x3  length: 0x0005 type: 0x1  data:
005632: 7w6d: dot1x-ev:FastEthernet0/31:Sending EAPOL packet to group PAE address
005633: 7w6d: dot1x-ev:dot1x_mgr_pre_process_eapol_pak: Role determination not required on FastEthernet0/31.
005634: 7w6d: dot1x-registry:registry:dot1x_ether_macaddr called
005635: 7w6d: dot1x-ev:dot1x_mgr_send_eapol: Sending out EAPOL packet on FastEthernet0/31
005636: 7w6d: EAPOL pak dump Tx
005637: 7w6d: EAPOL Version: 0x2  type: 0x0  length: 0x0005
005638: 7w6d: EAP code: 0x1  id: 0x3  length: 0x0005 type: 0x1
005639: 7w6d: dot1x-packet:dot1x_txReq: EAPOL packet sent out for the default authenticator
005640: 7w6d: dot1x-ev:Received an EAP Timeout on FastEthernet0/31 for mac 0000.0000.0000
005641: 7w6d: dot1x-sm:Posting EAP_TIMEOUT on Client=39E7F78
005642: 7w6d:     dot1x_auth_bend Fa0: during state auth_bend_request, got event 12(eapTimeout)
005643: 7w6d: @@@ dot1x_auth_bend Fa0: auth_bend_request -> auth_bend_timeout
005644: 7w6d: dot1x-sm:Fa0/31:0000.0000.0000:auth_bend_timeout_enter called
005645: 7w6d: dot1x-sm:Fa0/31:0000.0000.0000:auth_bend_request_timeout_action called
005646: 7w6d:     dot1x_auth_bend Fa0: idle during state auth_bend_timeout
005647: 7w6d: @@@ dot1x_auth_bend Fa0: auth_bend_timeout -> auth_bend_idle
005648: 7w6d: dot1x-sm:Fa0/31:0000.0000.0000:auth_bend_idle_enter called
005649: 7w6d: dot1x-sm:Posting AUTH_TIMEOUT on Client=39E7F78
005650: 7w6d:     dot1x_auth Fa0: during state auth_authenticating, got event 14(authTimeout)
005651: 7w6d: @@@ dot1x_auth Fa0: auth_authenticating -> auth_fallback
005652: 7w6d: dot1x-sm:Fa0/31:0000.0000.0000:auth_authenticating_exit called
005653: 7w6d: dot1x-sm:Fa0/31:0000.0000.0000:auth_fallback_enter called
005654: 7w6d: dot1x-sm:Posting AUTH_FAIL on Client=39E7F78
005655: 7w6d:     dot1x_auth Fa0: during state auth_fallback, got event 15(authFail)
005656: 7w6d: @@@ dot1x_auth Fa0: auth_fallback -> auth_authc_result
005657: 7w6d: dot1x-sm:Fa0/31:0000.0000.0000:auth_authc_result_enter called
005658: 7w6d: dot1x-ev:dot1x_guest_vlan_applicable: Guest VLAN not applicable.  Supplicant disabled and EAPOL seen on port FastEthernet0/31.
005659: 7w6d: dot1x-sm:Posting AUTHC_FAIL on Client=39E7F78
005660: 7w6d:     dot1x_auth Fa0: during state auth_authc_result, got event 23(authcFail)
005661: 7w6d: @@@ dot1x_auth Fa0: auth_authc_result -> auth_held
005662: 7w6d: dot1x-ev:dot1x_guest_vlan_applicable: Guest VLAN not applicable.  Supplicant disabled and EAPOL seen on port FastEthernet0/31.
005663: 7w6d: dot1x-sm:Posting RESTART on Client=39E7F78
005664: 7w6d:     dot1x_auth Fa0: during state auth_held, got event 13(restart)
005665: 7w6d: @@@ dot1x_auth Fa0: auth_held -> auth_restart
005666: 7w6d: dot1x-sm:Fa0/31:0000.0000.0000:auth_held_exit called
005667: 7w6d: dot1x-sm:Fa0/31:0000.0000.0000:auth_restart_enter called
005668: 7w6d: dot1x-ev:Resetting the client 0000.0000.0000
005669: 7w6d: dot1x-sm:Posting !EAP_RESTART on Client=39E7F78
005670: 7w6d:     dot1x_auth Fa0: during state auth_restart, got event 6(no_eapRestart)
005671: 7w6d: @@@ dot1x_auth Fa0: auth_restart -> auth_connecting
005672: 7w6d: dot1x-sm:Fa0/31:0000.0000.0000:auth_connecting_enter called
005673: 7w6d: dot1x-sm:Fa0/31:0000.0000.0000:auth_restart_connecting_action called
005674: 7w6d: dot1x-packet:Received an EAP request packet from EAP for mac 0000.0000.0000
005675: 7w6d: dot1x-sm:Posting REAUTH_MAX on Client=39E7F78
005676: 7w6d:     dot1x_auth Fa0: during state auth_connecting, got event 11(reAuthMax)
005677: 7w6d: @@@ dot1x_auth Fa0: auth_connecting -> auth_disconnected
005678: 7w6d: dot1x-sm:Fa0/31:0000.0000.0000:auth_disconnected_enter called
005679: 7w6d:     dot1x_auth Fa0: idle during state auth_disconnected
005680: 7w6d: @@@ dot1x_auth Fa0: auth_disconnected -> auth_restart
005681: 7w6d: dot1x-sm:Fa0/31:0000.0000.0000:auth_restart_enter called
005682: 7w6d: dot1x-ev:Resetting the client 0000.0000.0000
005683: 7w6d: dot1x-sm:Posting !EAP_RESTART on Client=39E7F78
005684: 7w6d:     dot1x_auth Fa0: during state auth_restart, got event 6(no_eapRestart)
005685: 7w6d: @@@ dot1x_auth Fa0: auth_restart -> auth_connecting
005686: 7w6d: dot1x-sm:Fa0/31:0000.0000.0000:auth_connecting_enter called
005687: 7w6d: dot1x-sm:Fa0/31:0000.0000.0000:auth_restart_connecting_action called
005688: 7w6d: dot1x-packet:Received an EAP request packet from EAP for mac 0000.0000.0000
005689: 7w6d: dot1x-sm:Posting RX_REQ on Client=39E7F78
005690: 7w6d:     dot1x_auth Fa0: during state auth_connecting, got event 10(eapReq_no_reAuthMax)
005691: 7w6d: @@@ dot1x_auth Fa0: auth_connecting -> auth_authenticating
005692: 7w6d: dot1x-sm:Fa0/31:0000.0000.0000:auth_authenticating_enter called
005693: 7w6d: dot1x-sm:Fa0/31:0000.0000.0000:auth_connecting_authenticating_action called
005694: 7w6d: dot1x-sm:Posting AUTH_START on Client=39E7F78
005695: 7w6d:     dot1x_auth_bend Fa0: during state auth_bend_idle, got event 4(eapReq_authStart)
005696: 7w6d: @@@ dot1x_auth_bend Fa0: auth_bend_idle -> auth_bend_request
005697: 7w6d: dot1x-sm:Fa0/31:0000.0000.0000:auth_bend_request_enter called
005698: 7w6d: dot1x-packet:dot1x_mgr_send_eapol :EAP code: 0x1  id: 0x5  length: 0x0005 type: 0x1  data:
005699: 7w6d: dot1x-ev:FastEthernet0/31:Sending EAPOL packet to group PAE address
005700: 7w6d: dot1x-ev:dot1x_mgr_pre_process_eapol_pak: Role determination not required on FastEthernet0/31.
005701: 7w6d: dot1x-registry:registry:dot1x_ether_macaddr called
005702: 7w6d: dot1x-ev:dot1x_mgr_send_eapol: Sending out EAPOL packet on FastEthernet0/31
005703: 7w6d: EAPOL pak dump Tx
005704: 7w6d: EAPOL Version: 0x2  type: 0x0  length: 0x0005
005705: 7w6d: EAP code: 0x1  id: 0x5  length: 0x0005 type: 0x1
005706: 7w6d: dot1x-packet:dot1x_txReq: EAPOL packet sent out for the default authenticator
005707: 7w6d: dot1x-sm:Fa0/31:0000.0000.0000:auth_bend_idle_request_action called
005708: 7w6d: dot1x-registry:dot1x_switch_port_physical_linkchange invoked on interface Fa0/31
005709: 7w6d: dot1x-ev:dot1x_mgr_if_state_change: FastEthernet0/31 has changed to DOWN
005710: 7w6d: dot1x-ev:Cleared all authenticator instances on FastEthernet0/31
Dot1x Info for FastEthernet0/31
PAE                       = AUTHENTICATOR
PortControl               = AUTO
ControlDirection          = Both
HostMode                  = SINGLE_HOST
ReAuthentication          = Disabled
QuietPeriod               = 3
ServerTimeout             = 30
SuppTimeout               = 30
ReAuthPeriod              = 3600 (Locally configured)
ReAuthMax                 = 2
MaxReq                    = 2
TxPeriod                  = 5
RateLimitPeriod           = 0
Guest-Vlan                = 106
Any idea? thanks in advance.

Did you try "Unencrypted authentication (PAP, SPAP)" tick in Network Policies?
It's probably going to solve your problem

Similar Messages

  • Windows 2012: Error: No computers available in the pool.

    I've got a russian versions of all the components I am talking about. But I got no help on Russian Forum so I translated my question to English to post it here. So, messages from logs are translated back to English from Russian and they may look different
    to what you get in English version (not translated to Russian and then back to English).
    I have got two physical servers with Windows 2012 Server installed on them, one of them is Domain Controller, the other server got Remote Desktop roles: RD Connection Broker, RD Web Access and RD Virtualization Host. I
    use Hyper-V to create Virtual Machines on the second Server (server with RD roles installed). 
    I have created 2 collections: one Personal and one Pooled. Template
    machine used for both collections is a sysprepped clean install of Windows 8.1 Pro. I connect to collections through RDP file I am getting from RD Web Access.
    When I connect to Pooled Collection everything is going fine but when I attempt to connect to Personal Collection
    I am getting Error "There are no computers available in the pool. Try to connect later or contact Administrator."
    At that moment in Server log [translated by me from russian]:
    VDI
    1306
     Error 
    Microsoft-Windows-TerminalServices-SessionBroker-Client
    Microsoft-Windows-TerminalServices-SessionBroker-Client/Operational
    Connection Broker Client failed to redirect user domain\user. 
    Error: NULL
    VDI
    1296 
    Error 
    Microsoft-Windows-TerminalServices-SessionBroker-Client
    Microsoft-Windows-TerminalServices-SessionBroker-Client/Operational
    On getting a redirection packet from Connection Broker an error occured in Connection Broker Client.
    Пользователь: domain\user
    Error: Element not found. 
    VDI
    802
     Error
     Microsoft-Windows-TerminalServices-SessionBroker 
    Microsoft-Windows-TerminalServices-SessionBroker/Admin
    Connection Broker failed to process a connection request for user domain\user. Failed to perform load balancing OR end point not found.
    Error: Access denied.
    VDI
    804
    Error
    Microsoft-Windows-TerminalServices-SessionBroker
     Microsoft-Windows-TerminalServices-SessionBroker/Admin
    Connection Broker failed to find a personal virtual desktop assigned to user domain\user. HRESULT = 0x80070005
    I have tried using different options of AutoAssignPersonalDesktop
    (manual and automatic assignment), reinstalling the RD roles and even reinstalling the server with RD roles. Nothing helps. Errors remain the same.
    I was using official guides when I installed RD roles on the server.

    Hi,
    Thank you for posting in windows Server Forum.
    From the error description it seems that broker connection is not established well and also there might be some permission issue with user and groups. Please verify that RDSH can communicate with RDCB servers well.
    Remote Desktop Connection Broker (RD Connection Broker), formerly Terminal Services Session Broker, is a Remote Desktop Services role service in Windows Server 2008 R2 that supports session load balancing between RD Session Host servers in a farm, connections
    to virtual desktops, and reconnection to an existing session in a load-balanced RD Session Host server farm.
    Event ID 1296 — RD Connection Broker Communication
    http://technet.microsoft.com/en-us/library/ee891061(v=ws.10).aspx
    Also you can check how the connection works from “A user is connected to a personal virtual desktop in the following way” this part from below article.
    Deploying Personal Virtual Desktops by Using Remote Desktop Web Access Step-by-Step Guide
    http://technet.microsoft.com/en-us/library/dd883277(v=ws.10).aspx
    Hope it helps!
    Thanks.
    Dharmesh Solanki
    TechNet Community Support

  • Windows 2012 Nodes - Slow CSV Performance - Need help to resolve my iSCSI issue configuration

    I spent weeks going over the forums and the net for any publications and advice on how to optimize iSCSI connections and i'm about to give up.  I really need some help in determining if its something i'm not configuring right or maybe its an equipment
    issue. 
    Hardware:
    2x Windows 2012 Hosts with 10 Nics (same NIC configuration) in a Failover Cluster sharing a CSV LUN. 
    3x NICs Teamed for Host/Live Migration (192.168.0.x)
    2x NICS teamed for Hyper-V Switch 1 (192.168.0.x)
    1x NIC teamed for Hyper-V Switch 2 (192.168.10.x)
    4x NICs for iSCSI traffic (192.168.0.x, 192.168.10.x, 192.168.20.x 192.168.30.x)
    Jumbo frames and flow control turned on all the NICs on the host.  IpV6 disabled.  Client for Microsoft Network, File/Printing Sharing Disabled on iSCSI NICs. 
    MPIO Least Queue selected.  Round Robin gives me an error message saying "The parameter is incorrect.  The round robin policy attempts to evenly distribute incoming requests to all processing paths. "
    Netgear ReadyNas 3200
    4x NICs for iSCSI traffic ((192.168.0.x, 192.168.10.x, 192.168.20.x 192.168.30.x)
    Network Hardware:
    Cisco 2960S managed switch - Flow control on, Spanning Tree on, Jumbo Frames at 9k - this is for the .0 subnet
    Netgear unmanaged switch - Flow control on, Jumbo Frames at 9k - this is for .10 subnet
    Netgear unmanaged switch - Flow control on, Jumbo Frames at 9k - this is for .20 subnet
    Netgear unmanaged switch - Flow control on, Jumbo Frames at 9k - this is for .30 subnet
    Host Configuration (things I tried turning on and off):
    Autotuning 
    RSS
    Chimney Offload
    I have 8 VMs stored in the CSV.  When try to load all 8 up at the same time, they bog down.  Each VM loads very slowly and when they eventually come up, most of the important services did not start.  I have to load
    them up 1 or 2 at a time.  Even then the performance is nothing like if they were loading up on the Host itself (VHD stored on the host's hdd).  This is what prompted me to add in more iSCSI connections to see if I can improve the VM's
    performance.  Even with 4 iSCSI connections, I feel nothing has changed.  The VMs still start up slowly and services do not load right.  If I distribute the load with 4 VMs on Host 1 and 4 VMs on Host 2, the load up
    times do not change. 
    As a manual test for file copy speed, I moved the cluster resources to Host 1 and copied a VM from the CSV and onto the Host.   The speed would start out around 250megs/sec and then eventually drop down to about 50/60 megs/sec.  If I turn
    off all iSCSI connections except one, it get the same speed.  I can verify from the Windows Performance Tab under Task Manager that all the NICS are distributing traffic evenly, but something is just limiting the flow.  Like what I stated on top,
    I played around with autotuning, RSS and chimney offload and none of it makes a difference. 
    The VMs have been converted to VHDx and to fixed size.  That did not help.   
    Is there something I'm not doing right?   I am working with Netgear support and they are puzzled as well.  The ReadyNas device should easily be able to handle it. 
    Please help!  I pulled my hair out over this for the past two months and I'm about to give up and just ditch clustering all together and just run the VMs off the hosts themselves. 
    George

    A few things...
    For starters, I recommend opening a case with Microsoft support.  They will be able to dig in and help you...
    Turn on the CSV Cache, it will boost your performance 
    http://blogs.msdn.com/b/clustering/archive/2012/03/22/10286676.aspx
    A file copy has no resemblance of the unbuffered I/O a VM does... so don't use that as a comparison, as you are comparing apples to oranges.
    Do you see any I/O performance difference between the coordinator node and the non-coordinator nodes?  Basically, see which node owns the cluster Physical Disk resource... measure the performance.  Then move the Physical Disk resource for the
    CSV volume to another node, and repeat the same measure of performance... then compare them.
    Your IP addressing seems odd...  you show multiple networks on 192.168.0.x and also on 192.168.10.x.   Remember that clustering only recognizes and uses 1 logical interface per IP subnet.  I would triple check all your IP schemes...
    to ensure they are all different logical networks.
    Check you binding order
    Make sure you NIC drivers and NIC firmware are updated
    Make sure you don't have IPsec enabled, that will significantly impact your network performance
    For the iSCSI Software Initiator, when you did your connection... make sure you didn't do a 'Quick Connect'... that will do a wildcard and connect over any network.  You want to specify your dedicated iSCSI network
    No idea what the performance capabilities of the ReadyNas is...  this could all likely be associated with the shared storage.
    What speed NIC's are you using?   I hope at least 10 GB...
    Hope that helps...
    Elden
    Hi Elden,
    2. CSV is turned on, I have 4GB dedicated from each host to it.  With IOmeter running within the VMs, I do see the read speed jumped up 4-5x fold but the write speed stays the same (which according to the doc it should).  But even with the read
    speed that high, the VMs are not starting up quickly.  
    4. I do not see any difference with IO with coordinator and non coordinator nodes.  
    5.  I'm not 100% sure what your saying about my IPs.  Maybe if I list it out, you can help explain further.  
    Host 1 - 192.168.0.241 (Host/LM IP), Undefined IP on the 192.168.0.x network (Hyper-V Port 1), Undefined IP on the 192.168.10.x network (Hyper- V port 2), 192.168.0.220 (iSCSI 1), 192.168.10.10 (iSCSI2), 192.168.20.10(iSCSI 3), 192.168.30.10 (iSCSI 4)
    The Hyper-V ports are undefined because the VMs themselves have static ips.  
    0.220 host NIC connects with the .231 NIC of the NAS
    10.10 host NIC connects with the 10.100 NIC of the NAS
    20.10 host NIC connects with the 20.100 NIC of the NAS
    30.10 host NIC connects with the 30.100 NIC of the NAS
    Host 2 - 192.168.0.245 (Host/LM IP), Undefined IP on the 192.168.0.x network (Hyper-V Port 1), Undefined IP on the 192.168.10.x network (Hyper- V port 2), 192.168.0.221 (iSCSI 1), 192.168.10.20 (iSCSI2), 192.168.20.20(iSCSI 3), 192.168.30.20 (iSCSI 4)
    The Hyper-V ports are undefined because the VMs themselves have static ips.  
    0.221 host NIC connects with the .231 NIC of the NAS
    10.20 host NIC connects with the 10.100 NIC of the NAS
    20.20 host NIC connects with the 20.100 NIC of the NAS
    30.20 host NIC connects with the 30.100 NIC of the NAS
    6. Binding orders are all correct.
    7. Nic drivers are all updated.  Didn't check the firmware.
    8. I do not know about IPSec...let me look into it.  
    9. I did not do quick connect, each iscsi connection is defined using a specific source ip and specific target ip.  
    These are all 1gigabit nics, which is the reason why I have so many NICs...otherwise there would be no reason for me to have 4 iscsi connections.  

  • Issues with Shell32.dll, NTDLL.DLL and Migration from Windows 2003 to Windows 2012

    Hello all,
    I am new to ThinApp and working as a consultant to help a company migrate older Windows 2003 software to Windows 2012.  They have purchased ThinApp 5.0.4.5 so that is what we will be using.
    We have created a clean 2003 VM and did a pre-scan
    We loaded the application and configured it  and then did a capture.
    We then tested the capture the 2003 VM and it works
    We then loaded the capture on a Clean 2003 VM and it works
    We then loaded onto a 2012 VM and when running the app from a command window get an error  -missing import shell32.dll:StrCpyNW
    If we run the capture in Emulation Mode on 2012 VM, we do not get the Shell32.dll error but instead the cmd fails with a Fault Module Name  - NTDLL.DLL error
    I am sure I am just missing the correct location to identify or configure the capture - but do not have the experience to know where yet.  (Taking training next week).
    Until then, is there any suggestions which I can try?
    Thanks for your time in advance,
    Vince 

    Tried and done that.  The main issue while configuring the printer from the printer Web Interface is that there is no access to the Digital Sending section due to a problem with the "Sun Java plug in"  I think the code mentions 1.31. or similar.
     We downloaded the java plug in and installed it.  No progress. 
    We reset the printer to defaults and reconfigured it .. It sees the smtp gateway and access it but fails sending email with scanned documents.. 
    We have tried in very different ways.  We connected the printer to another domain SBS server 2003 and it works beautifully.  So, I have no idea on what is the problem. We created a firewall exception for ports 390. 1783 from the SBS to the Printer
    and still no go..
    We have tried four different accounts and nothing.  Same results as stated originally.
    Any other suggestions??
    JFM

  • Joining Windows 2012 Server to SBS 2011 Domain

    Hi All,
    I have been trying to get a new Windows 2012 Server to join a SBS 2011 domain. The error message I am getting is:
    The following error occurred attempting to join the domain: xxxx. The specified domain does not exist or could not be contacted.
    I have a bunch of other Windows 7/XP workstations that have joined successfully. I have also tried disabling TCP/IP v6 on the 2012 server and joining the domain with the netdom command. The SBS 2011 server is listed as the primary DNS server on the 2012
    server.
    What else can I try here?
    Thanks,
    DR.

    I am having the same issue has the OP. I have my DNS settings pointing to the sbs server that hosts the domain and DNS. I am receiving the same error.
    Server 2012 R2 Standard
    SBS 2011 Essentials
    Jerry T

  • Lync Edge server on windows 2012 R2 prequistes

    What, if any, are the perquisites for install lync 2013 edge server on Windows 2012 R2.  I have looked around and only found information for Windows 2012 and it requiring WIF 3.5.  Is this required for R2 as when you go to install it you get:
    is it required and do I require anything else?
    Thanks

    Hi,
    Agree with Georg.
    What’s more, you can refer to the link of “Installing Lync 2013 Edge Server”, it is Windows Server 2012 Standard or Datacenter, but similar for Windows Server 2012 R2:
    http://www.orcsweb.com/blog/cory-granata/installing-lync-2013-edge-server/
    Note: Microsoft is providing this information as a convenience to you. The sites are not controlled by Microsoft. Microsoft cannot make any representations regarding the quality, safety, or suitability of any software or information found there. Please make
    sure that you completely understand the risk before retrieving any suggestions from the above link.
    If you not choose all required roles and features, when you running Lync Server deployment Wizard and running steps, you will receive error and point out what you need to install.
    Best Regards,
    Eason Huang
    Eason Huang
    TechNet Community Support

  • Synchronization fails on Windows 2012 Server

    Hello, Running DPM 2012 R2, Protected computer Windows 2012 Standard
            I'm backing up only folders (19 GB) on a Windows 2012 server which also have SCCM 2012 installed on it.  The initial replica and recovery point creations are successful.   Any
    scheduled synchronization job scheduled after will fail.    The job display "In progress" but there is 0 MB data transferred and will remain in that stage for days until I cancel the job.  A reboot of the protected server
    resolves the issue temporarily where I might get a couple days of successful synchronization\recovery points but then the job will freeze again.  I have looked in the event logs and the logs in Monitoring on the DPM server and also on the protected computer
    but have not found any error that points to the cause.  Has anyone seen this issue?  Will be grateful if someone can point me in the right direction of troubleshooting this issue.  Thank you. 

    Not seeing any errors that stands out. Here is the log from today's synchronization job that is hung.
    2B98 2AC0 06/18 14:50:54.265 31 vsssnapshotrequestor.cpp(2078) [00000000028FD320] 123F41D6-B559-4121-A184-AA68B4359C35 NORMAL CVssSnapshotRequestor::DoFailureCleanup [00000000028FD320]
    2B98 2AC0 06/18 14:50:54.265 31 vsssnapshotrequestor.cpp(1630) [00000000028FD320] 123F41D6-B559-4121-A184-AA68B4359C35 NORMAL CVssSnapshotRequestor::ReleaseVolumesForSnapshot [00000000028FD320]
    2B98 2A40 06/18 15:05:54.409 31 vsssnapshotrequestor.cpp(119) [00000000028FD320] 123F41D6-B559-4121-A184-AA68B4359C35 NORMAL CVssSnapshotRequestor::~CVssSnapshotRequestor [00000000028FD320]
    2B98 2A40 06/18 15:05:54.410 31 vsssnapshotrequestor.cpp(2044) [00000000028FD320] 123F41D6-B559-4121-A184-AA68B4359C35 NORMAL CVssSnapshotRequestor::CleanUp [00000000028FD320]
    2B98 2A40 06/18 15:05:54.410 31 vsssnapshotrequestor.cpp(1630) [00000000028FD320] 123F41D6-B559-4121-A184-AA68B4359C35 NORMAL CVssSnapshotRequestor::ReleaseVolumesForSnapshot [00000000028FD320]
    I ran the VSSADMIN LIST WRITERS command after  I cancelled the job and this is the returned message. 
    "Waiting for response.
    These may be delayed if a shadow copy is prepared."

  • Sharepoint 2013 installation in windows 2012 R2 server

    Hi,
    I am unable to install Sharepoint 2013 server on Windows 2012 R2 Server.
    I am getting below error
    The tool was unable to install Application Server Role, Web Server (IIS) Role.
    I checked my IIS it is working fine.
    Please help me out.
    Regards,
    Siva.

    Make sure you have the SharePoint 2013 with Service Pack 1 ISO. Pre-SP1 will not install to SP 2013, and you cannot slipstream it yourself.
    Trevor Seward
    Follow or contact me at...
    &nbsp&nbsp
    This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

  • SharePoint 2013 SP1 on Windows 2012 R2

    Hello all,
    Excited as I was to finally get the slip-streamed version of SP 2013 with SP1 so I could install it on Windows 2012 R2 I'm having trouble installing the pre-requisites.
    I've found this article here -
    http://support.microsoft.com/kb/2765260/en-gb - but the resolution won't work. The update (KB2771431) won't install on 2012 R2 and the manual fix fails even though I am connected to the internet.
    Has anyone successfully installed SP 2013 SP1 on 2012 R2 ?
    Thanks

    Hi etala,
    Please intall Windows Server AppFabric manually.
    Here are some  links, please take a look at:
    http://blogs.technet.com/b/praveenh/archive/2013/02/22/sharepoint-2013-prerequisites-fails-with-msi-installer-error-code-1603-while-installing-appfabric-1-1.aspx
    http://social.technet.microsoft.com/wiki/contents/articles/14582.sharepoint-2013-install-prerequisites-offline-or-manually-on-windows-server-2012-a-comprehensive-guide.aspx
    http://www.spjeff.com/2012/07/19/fixed-sharepoint-2013-setup-error-appfabric-is-not-correctly-configured/
    I hope this helps.
    Thanks,
    Wendy
    Forum Support
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
    [email protected]
    Wendy Li
    TechNet Community Support

  • On Windows 2012 Terminal Server Outlook fails to connect to Exchange 2013

    I have a new install of Windows 2012.  I have two physical servers.  One is a W2012 std Domain Controller ("DC").  The Second is configured as W2012 HyperV  ("HV").  Under HV I have
    two VMs.  One VM is W2012/Exchange 2013 ("ExchVM) and the other is W2012/Terminal Server ("VMTS").  All systems are behind a firewall appliance.  Exchange is working via Outlook and OWA internally and externally.  The self
    created SSL must be installed manually on external machines since it comes up as an untrusted certificate.  Once installed remote outlook works and OWA works.  I have configured the terminal server and I am able
    to login remotely as various users under my "TS group".  The problem is when ever I attempt to open Outlook for the 1st time, it fails to connect to the exchange server.   (Open Outlook 2013, click next
    on the splash screen, "Yes" Add an Email Account splash screen, click next, Auto Account screen populates NAME and Email Address correctly, click next, Searching for mail server settings..., check on establishing network connection, check on searching
    for alias@ domain, then fails the logging on to the mail server)  The error reads:  "Outlook cannot log on.  Verify you are connected to the network and are using the proper server and mailbox name.  The
    connection to Microsoft Exchange is unavailable.  Outlook must be online or connected to complete this action."   I am connected in RDS from offsite, and from the RD session I can access shared folders on ExchVM and DC.  I have
    tried have verified the server Exchange server name is correct via "Get=ClientAccessServer" command.  I have also tried to use the guid via "Get-Mailbox
    ALIAS | fl name, exchangeguid.  Keep in mind all desktop users on the network are connecting to Outlook without issue.
    I would appreciate any thoughts on solving this issue.

    Hi,
    According to your workaround, it seems that the Outlook Anywhere configuration in Outlook client is not correct when using the Autodiscover service.
    Once you connected to Exchange server by manually settings, please run Test E-mail AutoConfiguration tool in external Outlook client to check the autodiscover service:
    open Outlook - press CTRL key - right click on the Outlook icon from right bottom corner taskbar - Test Email AutoConfiguration. Put your email address - uncheck use guessmart and secure guessmart authentication - click Test to check your Autodiscover service.
    Please check the Log tab and confirm whether the Autodiscover service is connected successfully. Also confirm if the connection issue happens to all external users when they open Outlook for the 1st time. In Exchange server, please make sure
    autodiscover.domain.com has been included in your Exchange certificate which is assigned with IIS service.
    Regards,
    Winnie Liang
    TechNet Community Support

  • Install Exchange 2010 Sp3 on Windows 2012 R2

    Dear All,
    From Microsoft Exchange support matrix, I can tell that Exchange 2010 Sp3 is not listed on supported page. However when I run the setup, the prerequisite setup check, dose not list any warnings or issues with the setup, all check are green. Is it possible
    that the support OS matrix has not been updated? Is Exchange 2010 Sp3 supported on Windows 2012 R2?
    http://blogs.technet.com/b/rmilne/archive/2013/09/17/exchange-support-for-windows-server-2012-r2.aspx
    Thank you

    The prerequisite check is checking that the required Windows components are installed.  Exchange 2010 is still not supported on Windows Server 2012 R2.

  • Install SharePoint 2013 on Windows 2012 R2

    What are the right steps to slipsteam SP 2013 with SP1, from what I understand this will fix the issues with Windows 2012 R2

    You currently cannot install SharePoint 2013 on 2012 R2. You will need to wait for an updated ISO release from Microsoft for SharePoint 2013 with Service Pack 1, which will have an updated pre-req installer binary.
    The SP1 currently out does not update that binary.
    Trevor Seward
    Follow or contact me at...
    &nbsp&nbsp
    This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

  • Install sharepoint 2013 demo on windows 2012 r2 essentials

    Am configuring my laptop for demo so installing windows 2012 r2 essentials (which requires to be the DC). I know SharePoint 2013 server is not recommended to be installed on the DC. I have seen the Workflow 2013 is not supported on the DC but
    still can work with the 2010 workflow. any other SharePoint 2013 features are not available on the DC ? From the SQL Server perspective this will only be a security issue the way I see, but am using this laptop for demo/test only.

    HI,As you said,SharePoint 2013 does not support installation on to a domain controller. A single label domain (SLD) names or single label forests is also not supported. Because the use of SLD names is not a recommended practice, . Therefore, there may be
    incompatibility issues when SharePoint 2013 are implemented in a single label domain environment.Apart from this no issues.you can find the detailed installation of sharepoint 2013 in below.
    http://expertsharepoint.blogspot.de/2013/11/detailed-sharepoint2013-installation-i.html.
    you can find the details on latest patches in the same site.
    Anil Avula[MCP,MCSE,MCSA,MCTS,MCITP,MCSM] See Me At: http://expertsharepoint.blogspot.de/

  • SharePoint 2010 SP2 hosted on Windows 2012 R2 NOT discovered by SCOM 2012 R2 + 2 SP MP's

    What is the process to get SharePoint 2010 Management Packs loaded in System Center 2012 R2 to discover/monitor SharePoint 2010 SP2 (14.0.7121.5000) loaded on Windows 2012 R2?
    View of installed system:
     System Center 2012 R2 loaded on Windows 2012 R2 (supported separately by SQL 2012 SP1 loaded on Windows 2012 R2)
    -Microsoft SharePoint 2010 Products Management Pack for System Center Operations Manager 2007
    -System Center 2012 Monitoring Pack for SharePoint 2010
     SharePoint 2010 SP2 (14.0.7121.5000) loaded on Windows 2012 R2 (supported separately by SQL 2012 SP1 loaded on Windows 2012 R2)
    The SharePoint 2010 Management Shell works fine!
    Result
    Event 0, Operations Manager - Cannot identify which SharePoint farm server is associated with. Check the management pack guide for troubleshooting information.
    Looked at these already:
    KB2690744, Configuring the SharePoint 2010 Management Pack for System Center Operations Manager. 
    http://om2012.wordpress.com/2013/05/24/sharepoint-2010-mp-on-scom-2012/
    Further, if the xml push does have the command get-farm instead of get-spfarm, that could be the issue. i.e.
    http://www.scom2k7.com/advanced-troubleshooting-of-the-sharepoint-2010-mp/
    Thanks,
    +Tony
    Please click "Propose As Answer" if a post solves your problem or "Vote As Helpful" if a post has been useful to you.

    Peter,
     I recommend to remove the Windows 2012 R2 server out of the farm and redeploy on W2008 R2.
    This issue does not have an easy fix.
    Summarizing, this appears to be the issue:
    1. Windows Management Framework 3.0 is integrated with Windows 2012 R2, which installs .NET 4 and Powershell 4.0. Not uninstallable.
    2. The Add-PSSnapin Microsoft.SharePoint.PowerShell is not supported with Powershell 4.0.
    3. The SCOM SP2010 MP puts a package on the defined farm server and when the agent launches the package, it calls Powershell (v4 in theis case) and errors out. The target W2012 server will have an Error 0 in the Operations Manager Event log. See below.
    Options:
    1. Work around maybe - Develop method for manual discovery (I'm working on that now).
    2. Rebuild SP2010 farm on Windows 2008 R2
    3. System Center Team - Write a new MP to down version Powershell (Powershell.exe -Version 2)
    4. Powershell Team - Write a SharePoint Snapin for Powershell 4
    Please click "Propose As Answer" if a post solves your problem or "Vote As Helpful" if a post has been useful to you.

  • Is SharePoint 2010 Supported on Windows 2012 R2

    Hi
    I have read Trevor Seward's responses to various questions on this subject :-
    http://social.technet.microsoft.com/Forums/en-US/ad4e17ee-83de-41d6-a974-244ceccb8a63/is-sharepoint-2010-sp1-is-supported-by-windows-server-2012-currently-i-have-os-version-of-server?forum=sharepointadminprevious
    http://social.technet.microsoft.com/Forums/en-US/e7539d34-aaa2-4d9c-a44c-e65d388d8944/support-for-sharepoint-foundation-2010-on-windows-server-2012-r2?forum=sharepointadminprevious
    However, we have a farm which is currently SP2010 SP1 which we are about to upgrade to SP2010 SP2 running on Windows Server 2008R2 and SQL Server 2008 R2. So the farm is currently not supported by Microsoft.
    We are now looking to upgrade this farm to SP2013 SP1 running Windows Server 2012 R2 and SQL Server 2012.
    We plan to start this process of by upgrading Windows Server 2008 R2 to Windows Server 2012 R2.
    Will SharePoint 2010 SP2 run on Windows 2012 R2 (or will we need Windows 2012) ?
    Once Server 2012 R2 (or Server 2012) is up and running, we will upgrade SP2010 SP2 to Sp2013 SP1.
    Finally upgrade SQL Server 2008R2 to SQL Server 2012.
    So the part I don't know is will SharePoint 2010 SP2 run on Windows 2012 R2 or Windows 2012 ?
    Thanks
    Nigel
    Nigel Price NJPEnterprises

    Not a question for the Windows Server people.  This is a question for the SharePoint people.  You may want to try asking in a SharePoint forum like
    http://social.technet.microsoft.com/Forums/en-US/home?forum=sharepointadminprevious
    . : | : . : | : . tim

Maybe you are looking for

  • ORA-20001: get_dbms_sql_cursor

    I am getting this error in an interactive report, the same query returns result in the sql workshop but not in the report. The query uses a dblink to access data in another database. The error I get is ORA-20001: get_dbms_sql_cursor error ORA-01747:

  • Saving and Emailing JSPs

    Hi Everybody, I need a little guidance on a unique requirement that I have. I"m using struts and the contents of JSPs are being populated from many session value objects. The users want to be able to save a jsp page with all the information on it and

  • Launching Problem - After Effects CS5

    Hello, I've a problem when i try to launch After Effects cs5 (Free trial 30 days). When it's loading, it stops and an error message says to me : After Effects (alerte) : Unknown BIB Error. invalid encoding, BRV, 0 (83 § 3) What can i do ? Thanks for

  • Ayuda fallo Elements2 al iniciar

    Tengo Adobe® Photoshop® Elements 2.0 al intentar iniciarlo me sale un error que me dice "Error al iniciar la aplicación porque no se encontró pano12.dll. La reinstalación de la aplicación puede solucionar el problema" y "No se encuentra el punto de e

  • HELP PLEASE - media test failure - check cable

    Hi - I have a toshiba satellite 1955-s801. It crashed on me some time ago and I am now trying to fix it. The message I receive when I turn it on : " For Realtek RTL8139 (A/B/C)/,RTL8130 PC/Fast Ethernet Controller V2.12 (010425) PXE-E61  media test f