806 Out-of-Box Problems

Hello,
I picked up a used 806 from a local ISP that was pulled from a working environment.
I was hopeful (but not optimistic) that I would be able to plug and play to get an internet connection (as the quick-setup suggests I should be able to).
I've tried to eliminate all variables so I have 1PC connected directly to the router. There is no internet WAN connection.
In this simple configuration, I am not able to ping the router (which is at 10.10.10.1). The router is also not able to ping the PC using terminal services.
Given this connection problem, the pc obviously is not able to pull an IP from the router.
I'm not sure exactly what the ISP originally used the router for, however, at this point I'd rather not reconfigure. I'd simply like to return the unit to factory defaults.
Does anyone have any advice on how I might do this?
Thank you for any help you can provide.
Jon S

Hello Jon,
do you have a console cable ? If so, connect it to the console port of the 806. Reboot the router and hit Ctrl+Break (this is the same procedure as during a password recovery). This should get you into ROMMON:
rommon 1>
At the ´rommon´ prompt, type:
rommon 1>confreg 0x2142
Then reboot the router by typing:
rommon 1>reset
Your router now reboots and puts you through the normal factory default setup routine.
HTH,
GP

Similar Messages

KVM with mini and out of box problem

#1 Just bought a refurbed mini, want to share kvm as I have in the past with a wintel laptop.
Anyone using a kvm controller with their mini? I've got a iogear with my existing wireless k/m and the mini doesn't like it very much. Sporadic mouse movements, and weird mouse type clicks happening when moving around menus(such as right click result on screen when hand isn't near the button).
I went to a wired mouse for a test as the kvm had a separate usb port for kybd and mouse...that hasn't completely solved the problem.
#2 I've got a 2nd problem which may be causing the keyboard issues. I unboxed my mini, started it and when prompted hooked up my old g4 mac as a target disk unit. The mini flawlessly transferred over all my email, programs, icon's, etc in a little under 2 hours. Rebooted and logged right in to my old environment! Very impressive. Patched it after that and it rebooted fine.
The other night, I turned it on, and the screen resolution was changed. Didnt think much of it thinking the kvm may be messing with it.
Two nights ago I checked my mail and walked away for a while..upon my return it locked. Held pwr key in until it shutdown and went to bed. Last night I turned it on, got the "Osx has recovered.." message. Cleared that and as soon as I opened mail it crashed again(getting the your computer has encountered a problem black box error..). Restarted tried my IM client...crash.... reboot, try firefox...crash.
I haven't tried booting and repairing disk permissions yet. Any other thoughts?
thanks

I use a TrendNet KVM with my Mini and PC.
Empirically I've concluded that a wireless mouse is not a good idea with this setup; I use a wired USB mouse now.
I had to try a couple of KVM brands before I found a good fit. Even so, occasionally I get a key repeat from a single key press, but otherwise everything is fine.
My experience has been that any kind of PS/2->USB adapter used with a KVM is a bad idea. The fewer converters the better.
I'd recommend not using the KVM until you get your other issues with the Mini sorted out.
It is possible that migrating your settings from other Mac is causing some of your problems.

I am having same problem with apple tv need 4.4 version and can not find solution this a brand new product out of box yesterday why would it not already have updated version. I am getting frustrated that I can not get this mirroring icon to work. I

I am having same problem with apple tv need 4.4 version and can not find solution this a brand new product out of box yesterday why would it not already have updated version. I am getting frustrated that I can not get this mirroring icon to work. I have tried all suggestions in this thread and nothing works. I also hooked up to laptop through iTunes with micro USB nothing!!!

The new appletv software came out 2 or 3 days ago, how would Apple get it on the device in the box in a store?
Why don't ou update the appletv software?

When I'm composing emails a dialog box keeps popping up asking me to click "resend" to reload my email. If I don't I get timed out. This problem has only happened after I installed update 3.6.16

When I'm composing emails a dialog box keeps popping up asking me to click "resend" to reload my email. If I don't I get timed out. This problem has only happened after I installed update 3.6.16
FYI I am referring to my ISP email on the providor's website, although I have not tried opening other email accounts on the updated Firefox.

etresoft a long time contributer to Apple Support Communities wrote a very useful app he called etrecheck which helps in diagnosing many problems caused by third party installs etc.. Go to his website, read his information and from there download and run the program according to his instructions
http://www.etresoft.com/etrecheck
Post the results back here
Pete

New out of box , unable to switch on is there a problem with the battery as i thopugh it should be partly charged.

new out of box , unable to switch on is there a problem with the battery as i thopugh it should be partly charged.

Plug it in for 15 minutes. If it doesn't come on hold the HOME button (the round one) and the SLEEP button (the one on the top) at the same time until an Apple logo appears (about 10 seconds). If nothing appears on the screen after 30 seconds you have a dead phone; take it back for exchange.

I can't connect to Wi-Fi - keeps timing out. No problem connecting from other laptops / phones. Stopped working after I did a system upgrade. What can I do?

I can't connect to Wi-Fi - keeps timing out. No problem connecting from other laptops / phones. Stopped working after I did a system upgrade. What can I do? I am on OS X Yosemite.

Take each of the following steps that you haven't already tried, until the problem is resolved. Some of these steps are only possible if you have control over the wireless router.
Step 1
Turn Wi-Fi off and back on.
Step 2
Restart the router and the computer. Many problems are solved that way.
Step 3
Change the name of the wireless network, if applicable, to eliminate any characters other than letters and digits. You do that on your router via its web page, if it's not an Apple device, or via AirPort Utility, if it is an Apple device.
Step 4
Run the Network Diagnostics assistant.
Step 5
In OS X 10.8.4 or later, run Wireless Diagnostics and fix the issues listed in the Summary, if any.
Step 6
Back up all data before proceeding.
Launch the Keychain Access application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
Enter the name of your wireless network in the search box. You should have one or more "AirPort network password" items with that name. Make a note of the name and password, then delete all the items. Quit Keychain Access. Turn Wi-Fi off and then back on. Reconnect to the network.
Step 7
You may need to change other settings on the router. See the guidelines linked below:
Recommended settings for Wi-Fi routers and access points
Potential sources of interference
Step 8
Make a note of all your settings for Wi-Fi in the Network preference pane, then delete the connection from the connection list and recreate it with the same settings. You do this by clicking the plus-sign icon below the connection list, and selecting Wi-Fi as the interface in the sheet that opens. Select Join other network from the Network Name menu, then select your network. Enter the password when prompted and save it in the keychain.
Step 9
Reset the System Management Controller (SMC).

Task termination due to sending of out of box email templates

Hi,
We are using custom templates to notify end user during creation, group approval and deletion process. Handling of proper template has taken care in workflow.
Instead of deleting the Out of box templates, the smtp address has changed to "1.0.0.0", to make sure end user won't receive these templates even its triggered by mistake.
In group approval scenario during update of a user, approver is getting an email notification through custom template and workitem is adding into approver's bin but randomly observing that the task is getting terminated with error message "javax.mail.SendFailedException: Sending failed; nested exception is: javax.mail.MessagingException: Could not connect to SMTP host: 1.0.0.0, port: 25; nested exception is: java.net.ConnectException: Connection timed out: connect".
This could be due to IDM sending default templates (as SMTP host: 1.0.0.0 is present only in default templates).
Due to this no action is getting executed upon the group approval request approved by the approver as main update task itself has terminated ( it makes sense).
Workflow trace shows task has executed fine with no errors.
Can any one help us why out of box templates is kicked off though custom templates names were set in workflow??
Is there a mapping of templates with scenario similar to form and process mapping??
Is deletion of out of box templates affect the system as we no where using??
Regards,
Laxmi

vilynne46 wrote:
Denial Letter: I don't understand something i have 3 Synchrony bank accounts, Which 2 of them have a zero balance of $102.00 dollars which I will pay off on Monday and I was denied for a BP gas credit card .I totally disagree with the reasons you gave for the denial as my credit report says nothing of the sort. If you really check my credit report you will see that I pay my bills on time I have never been late for the past seven years, I had a Bankruptcy in 2008 because I co signed for my step daughter for a house and she reniged on the payments and they came after me , so my Attorney suggested I claim bankruptcy, But if you check I always paid my bills on time every month Even before the Bankruptcy. I earn a good living , and I do not have any financial problems. My wife and I both use BP Gas as it is right down the street from our house, so rechecking my credit report will show you I always pay my bills on time Sincerly Victor GrecoDenial reference # is Loo22tWelcome to MyFico. Just so you know this is not Synchrony Bank but the forums for Fico, the issuer of credit scores. If you wish to communicate with Synchrony, you need to contact them directly though they are not known to overturn their credit decisions. Good luck

In my mac i dont create icloud keychain but it is asking password please help me to get out of this problem

In my mac book pro i don't create icloud keychain. But it is asking password.Please help me to get out of this problem.In OS X Mavericks

Hi, nportillo,
The next time you attempt to reach Skype Customer Service, try again using a different web browser and choosing a different path through the various drop-down menu options presented. Do not choose the obvious - you have already established that path is not working. Also, look to approve a pop-up dialogue box which would connect you to start an instant message chat with a customer service agent. If you have pop-ups blocked in your browser settings, this will also impede reaching an agent.
Skype is aware of problems reaching their customer service unit via the website, however people are getting through. I have flagged your report for follow-up by those to whom I report.
Regards,
Elaine
Was your question answered? Please click on the Accept as a Solution link so everyone can quickly find what works! Like a post or want to say, "Thank You" - ?? Click on the Kudos button!
Trustworthy information: Brian Krebs: 3 Basic Rules for Online Safety and Consumer Reports: Guide to Internet Security Online Safety Tip: Change your passwords often!

Share photos by email not working. Brings up grayed out check box? Want to share photos thru Entourage.

Share photos by email not working in Photos Version 1.0 (209.52.0) on a Macbook Pro 17" Yosemite 10.10.3. Brings up grayed out check box? Want to share photos thru MS Entourage for Mac 2008 Ver. 12.3.6 Thanks!

@Naiks, having suffered through unsuccessful synching attempts for Calendar and Contacts myself, l would suggest you try the following:
UNINSTALL iCloud control panel from your PC. Seems silly, but do it.
Go into Outlook, and look at the very top menu. Click FILE, then ACCOUNT SETTINGS, then click the popup box.
You will see a list of all your email accounts. Make sure that ONE of them has a checkmark against it. If not, select the account your want as your default, and click "set as default.
Exit out of Outlook and reboot your machine.
Now reinstall iCloud, check CALENDAR and CONTACTS, and do as instructed when prompted.
Reboot for good luck and now launch OUTLOOK. All that remains is to locate your iCloud Contacts and Calendar files, and make them your default.
IMPORTANT: Don't panic if you can't find your contacts -- they're there. Click CONTACTS and you'll see you have several available contact files. Locate the one label "iCloud" in grey type. Right-click on it, select PROPERTIES, then click the Outlook Address Book tab. Check the box that says something like "Make this my default Outlook Address Book." Keep clicking "apply" and "okay" until you've exited out of the dialog box maze.
You may have to do something similar with your Calendar files. I dd not, but if you need to, do it.
Everything should now sync pretty seamlessly.
I didn't have the exact same problem as you, but my dilemma was close enough. Good luck!
Arthur P. Johnson

Recovery out-of-box state

hello,
I have a toshiba satellite u400. I have used the system recovery (out-of-box state) multiple times by using the recovery disc and it worked. But lately when I try to do so, i get an error message, "cannot create or replace BIN: the path is too deep." This error occurs at the beginning of the recovery process while creating hdd recovery area. Is there a way around this?
thank you,
abdul

It sounds like there might be a problem with the hard drive itself.
- Peter

Web util out of box

As we all know webutil was not supported by oracle in forms 6i and 9i.
Can some one please give the information
1.which version of forms has webutil available out of box, i.e. where it will be installed as part of forms 9ias services.
2.From which version it will be fully be supported by oracle.

I see now that the portlet 'MyPortlet' is the problem. If I do not use this the
new portal web-app works.
thanks
"PortalUser" <[email protected]> wrote:
>
Hello,
Attempting to follow the out of box 4.0sp1 instructions to create a new
portal
web application.
I followed the directions in
http://e-docs.bea.com/wlp/docs40/portal/devbasic.htm#1055640
and also took advice from
http://newsgroups.bea.com/cgi-bin/dnewsweb?cmd=article&group=weblogic.developer.interest.portal&item=313&utag=
However I still get a java.lang.NullPointerException when I call http://localhost:7501/myportal
Any help is appreciated.
Many thanks

New 2011 Imac out of box, updated software now wont boot up? Ive had this machine for 24 hours!

Brand new out of box Imac 27" Booted up ok. Downloaded/updated software and prompted restart and now no screen? Makes the boot up noise but screen remains black? Any ideas or others with similar problem? Very dissapointed in product considering Im replacing my older Imac of 3.5yrs (out of warranty) with faulty hard drive.

Unplug it. Wait 2 minutes (don't rush it). Plug it back in. Power it up. Have patience during the first startup.
If the computer hasn't booted to the desktop (or the login screen if you have auto login disabled) within 5 minutes, considering that it's brand-new-out-of-the-box, call Apple and schedule a repair appointment at your nearest Apple Store.
I know it's annoying that you might have a lemon, but it does happen - don't give up on Mac because you got the one bad Apple.

Ipod nano 7th generation having issues with the UI. Out of box everything worked great. Once I snyc the device and it finished, the UI becomes unuesable. You have to double tap every icon in order to open music, videos, etc. I cannot swipe to the second

ipod nano 7th generation having issues with the UI. Out of box everything worked great. Once I snyc the device and it finished, the UI becomes unuesable. You have to double tap every icon in order to open music, videos, etc. I cannot swipe to the second page of icons, black box appears around an icon and then switches to a different one anytime I swipe. A box even appears around the time and battery power. iPod & iTunes are both updated. What is the FIX on this issue?

I had this problem as well. This is what I found by searching online. I tried the fix on my nano 7th gen and it worked. I hope this helps you. Make sure to use two fingers for sliding and double-click the icons to get into settings. Good luck.
It would seem that Voiceover has been enabled on your iPod Nano. The following article contains information regarding Voiceover, and how to disable it once it's been enabled.
iPod nano (6th generation and later): How to use VoiceOver
http://support.apple.com/kb/HT4317
To turn off VoiceOver on iPod nano using VoiceOver gestures
From the Home Screen, swipe right or left with two fingers until you see or hear "Page 2 of 2" on iPod nano (7th generation) or "Settings" on iPod (6th generation).
If the icons have been rearranged, or if there are more than four Home screens, you may hear something different.
Slide one finger around the screen until you hear Settings.
Double-tap to open Settings.
Slide your finger up or down the screen until you see or hear General, then double- tap.
Slide your finger up or down the screen until you see or hear Accessibility, then double-tap.
Slide your finger up or down the screen until you see or hear VoiceOver, then double-tap.
Double-tap when you hear "VoiceOver switch button on."
You'll hear "VoiceOver off" to confirm the setting. Now you can use standard gestures to control iPod nano.
Note: You can also turn off VoiceOver by resetting your iPod.

My iPhone 5 came with a ding & scratch out the box.

My iPhone 5 had a ding/chip at the top right corner and a scratch the the bottom right corner, right out the box. I put it in a case as soon as i got it. I didn't notice it until a day later when people asked me to see how it feels out of the case. There's been a lot of reports of this lately. I wonder if I can get a new one. I was never offered a apple + care plan. What you think

I contacted the apple store and they replaced my iPhone5.
Some apple employees even had the same problem so they understand.

Card reader not working out the box scr 3500?

cac card reader not working out of box scr3500 help

Welcome to discussions Kevin!
I'm sorry to hear that first of all make sure that there is nothing sick on the eye of the camera it self, after that how is the lighting on the room that the computer will be set up? did the green light came on when you're trying to use iSight? i'm asking because the same thing happen to me but it was nothing but bad lighting in my office. If this doen't help call apple asap they should replace your computer with out a problem. Hope this helps good luck!
Miguel

806 Out-of-Box Problems

Similar Messages

Maybe you are looking for