8330 and version 5.0

I can't find a recent answer to this. I just upgraded to the latest v. 4.5 through my desktop software. But isn't version 5.0 the latest? Doesn't it work on the 8330?
Thanks.
JJM

Version 5.0 for the 8330 was released by Boost Mobile. If you are from a different carrier, you won't automatically be able to install it on your device. You can download and install it from here: https://www.blackberry.com/Downloads/entry.do?code=32F6C513B25DF1C670753EB7335C4258
Make sure to delete the vendor.xml or device.xml file located at C:/Program Files/Common Files/Research In Motion/AppLoader before you update the device software.
As always, backup the phone before doing any updates to be safe
Kijana
Please remember to:
1. Mark Accept as Solution on the appropriate post once your issue has been resolved
2. Give Kudos to helpful posts (click the star next to the post)
Thanks

Similar Messages

Sync Problems between Blackberry 8330 and Outlook 2007 using Desktop software v 4.7

I have a Blackberry Curve 8330 and I have been experiencing some problems syncing it with my HP Notebook running Outlook 2007. I am using the most current Desktop Software version 4.7. I am using the BB Internet Service and all of my email accounts seem to be operating well. When I attempt to sync I receive the following errors in this sequence
Error 1: Intellisync; There are no applications configured for synchronization. From the synchronize screen, go to Configure > Synchronization to configure the applications.
At this point, I attempt to follow the above instructions and configure the applications I want to Sync. When I complete the above step for all applications, or each one seperately, I receive the following error:
Error 2: Runtime Error; Folder is no longer a part of the system data source or the folder can not be found.
As I stated above, I receive the error for all 4 applications (Address Book, Calendar, Memos and Tasks) whether they are configured seperately or all at once. I have unistalled the desktop software v4.7 5 times and Outlook 3 times. I am truly at a loss and in dire need of my Calendar and Contacts on my phone. If anyone has come across this in the past or has any ideas, Please feel free to comment or reply. Any info will be greatly appreciated!!!
BB: 8330 Curve
DS: Desktop Software v 4.7
PC: HP TX2500Z Notebook/Tablet
OS: Windows Vista Ultimate 64-Bit
DO: Microsoft Office Outlook 2007
Thanks,
Brian

uninstall the desktop manager, and install "4.7 without Media Manager"
The search box on top-right of this page is your true friend, and the public Knowledge Base too:

I just purchased a bb 8330 and i want to install 5.0 os on it should i do it before or after i activate it?

I just bought i new blackberry 8330 and i want to install 5.0 os on it. I have sprint as my carrier and i dont know if the allow 5.0 on their service. Should i install it before or after i activate it, or does it not matter?
also how long will it take when i install it on my blackberry with no personal settings and should i back-up my blackberry before i do it even though i have nothing saved on it?

anthonylo803 wrote:
I just bought i new blackberry 8330 and i want to install 5.0 os on it. I have sprint as my carrier and i dont know if the allow 5.0 on their service. Should i install it before or after i activate it, or does it not matter?
also how long will it take when i install it on my blackberry with no personal settings and should i back-up my blackberry before I do it even though I have nothing saved on it?
Hi and welcome to the forums!
I would activate it first and get used to the basic operation.
The upgrade will take about an hour to be on the safe side, and yes always take a full backup before
any upgrade. The link below will provide you with your carrier's website for downloading the Blackberry
device OS. Do you have the Blackberry desktop manager installed? What version is it?
Also attached is the upgrade procedure.
Thanks,
Bifocals
KB03621
How to use the application loader tool to install BlackBerry Device Software
Carrier support page
Click Accept as Solution for posts that have solved your issue(s)!
Be sure to click Like! for those who have helped you.
Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure.

Error in creation of model and version

Hi experts,
While I m trying to create Model and Version SAP demo systems, it is showing me error " Live cache is not availble".
Should I copy a planning version to new or should I contact basis team for that? It is also not allowing me to create new LC connection.
I am attaching screen shots. Please help.

Hi All,
BASIS guy have configured Live Cache. We have started live Cache succesfully.
Still facing problem in Version stating that an error occured in Live cache.
Kindly help.
Attaching screen shot below.

Summary report to show all the software components and version installed

We are using 64bit Windows 2003 and Hyperion Planning and Essbase in 2 separate servers. I am not sure whether Windows can have a summary report to show all the software components and version installed and show it is 32bit or 64bit version installed?
Thanks!

Refer steps here to delete SC file.:
http://support.apple.com/kb/TS2363
Then proceed to repair your QuickTime. START / CONTROL PANEL / ADD n REMOVE PROGRAMS / highlight QUICKTIME and click CHANGE then REPAIR.

How to find Mobile device OS name and version using Flex?

is there anyway to get device information like OS name and version using flex 4.5.1 or 4.6 SDK. i am developing a project in Flex which needs to identify the end user mobile platform like Android, iOS.. and its version like Android means 2.1,2.2,etc..
Anyone can help me on this?

I don't know that there is a proprietary driver. In fact, I'm sure there isn't because I never installed one. I figured there was some code file somewhere that dealt with keyboards. Yes, I have dealt with the developer, they say to tell Apple there is a problem. I have been putting it off and waiting to update since 10.6.3, so the problem is getting a little old. Do I even know there is a problem? I'm not sure what this means. I do know that when I update my operating system past 10.6.2 my keyboard no longer works, and I have to use a stock Apple keyboard to run a time machine reinstall. Why else would I be going through this?

Auto Save and Versions

Where can I control Auto Save and Versions? I can't find it in System Settings.
Can I control it by terminal commands?
On http://www.apple.com/macosx/what-is/ Apple claims:
Versions creates a new version of a document each time you open it and every hour while you’re working.
While here http://www.apple.com/macosx/whats-new/auto-save.html Apple claims:
Forget about manual saving and forge ahead with confidence. Auto Save in OS X Lion automatically saves your work, while you work, during pauses and every five minutes. And Lion saves changes in the background so you're never interrupted with progress bars.
So I wonder every five minutes or every hour? Would be nice to make sure on each Mac itself whether it auto-saves every five minutes or every hour and to actually allow its user o set the frequency.

It does both. It saves your work in the current version every 5 minutes. Every hour, it creates a new version of the document.
I haven't searched for any version settings, yet.

Table For Purchase Order Version Number and Version Created Date

Dear Sir,
Whenever we make any change in Purchase Order , then a new Version Number along with Created Date is assigned . In Me23n the Version Number and It's Created date is also displayed ( at PO Header Level) .
We request you to kindly guide us as which Table is required to be reffered to get the Version Number and Version Created date for the Purchase Order .
With Thanks and Rgds
Sonia

Hi
Check in EKKO - Purchase order header
EKPO - Purchase order item
CDHDR
CHPOS
Regards
Ram
Edited by: Parasuram M on Sep 16, 2009 11:59 AM

Procedure on Product Group and Versioning in MD61

Hi,
Can anybody send me a step-by-step procedure on how to execute the product group and versioning function in MD61at ching_pb @ yahoo com?
Tnx.
Regards

Dear Ching,
Are you working in an SAP version ECC 5.0 or 6.0?Then follow these steps.
1.Create a material using material type PROD in MM01.
2.Assign the materials to the product group in MC86.
3.Create a plan for this product group in MC81 for an inactive version.
4.Disaggregate the plan or create a production plan in MC76 for the same inactive version.
5.Transfer the requirement's to demand management in MC76 from inactive version to active version 00.
Check and revert back.
Regards
Mangalraj.S

"File with specified name and version number already exists. Result code= -48." ...????

Recently I have been getting this error message when I try to record an audio track in Logic... "File with specified name and version number already exists. Result code = -48." WHAT IS THE PROBLEM?????? It's making me furious!

Hi
As the message says, there is a file at the recording directory that has the same name:
http://support.apple.com/kb/ht1618
Try changing the name of the track (this sets the filename in later versions of Logic 9
CCT

I have a Blackberry 8330 and a MacBook. For some reason I started having connectivity issues. The handheld will not sync with the computer via pocketmac. I have uninstalled, etc 15 times. Please help

I have a Blackberry 8330 and a MacBook. For some reason I started having connectivity issues. The handheld will not sync with the computer via pocketmac. I have uninstalled, etc 15 times. Please help

Hi Peter!
I'm sorry to read that you are having issues with your Sync account.
Your best bet is to follow the steps described in this blogposts and open a bug:
https://philikon.wordpress.com/2011/06/13/how-to-file-a-good-sync-bug/
After that, if you don't want to user Sync in your computer, you can stop it with this simple steps:
* At the top of the Firefox window, click on the Firefox button (Tools menu in Windows XP) and then click Options.
* Once the options window opens, click on the Sync tab.
* At the bottom of the Sync tab click on '''Deactivate this Device''' link

Value Type and Version

Hi,
In most FI extractors, I see Value type (mapped to 0vtype) and version (mapped to 0version). Can anyone please explain the difference between them? Can you please share examples?
Thanks
Jason

Hi,
<b>Version:</b>
Indicates which planning version has been used for the data that has been posted to the Business Warehouse system.
The default value is 0, that is, the most current version
<b>Value Type:</b>
Indicates which type of values should be posted to the Business Warehouse system. You can choose between:
Actual figures
Plan figures
Target figures
Hope this is clear.
Regards,
Anu.

Version 8.5 and Version 11.5 on same machine

Post Author: ashleyp
CA Forum: Older Products
I've heard that loading version 8.5 and version 11.5 on the same pc can be done, but the loading needs to be done in a particular order. Does anyone have experience with this?
Thanks, Ashley

Post Author: DPowell
CA Forum: Older Products
Assuming you are talking about Crystal Reports and not the Enterprise product, then yes, they can co-exist, and without any "tweeking". You should install Crystal 8.5 first, and then 11.5. Naturally, at that point, the default program for any .RPT file will be the 11.5 product, so, if you need to maintain the 8.5 reports but not upgrade them, you will have to open those files within Crystal 8.5 instead of double-clicking on them from Windows Explorer.

Missing Software and version #

Okay, how would you all handle this:
In ZEN 7, we had JUST MSI And add/remove programs setup for software inventory. It actually did pretty good (example, it found a bunch of ESRI ArcGIS stuff).
It would show ALL the SDK (ie, there's an SDK for C++, one for VB, etc.)
It would also show the complete version and build number (ie: 9.2.134.21)
Now we are using ZAM 7.5 (in addition to ZEN, but eventually will cutover to ZCM)
Anyway, ZAM 7.5 seems even more limited in its software inventory.
It doesn't find any of the SDK's (I've had to submit multiple fingerprint wizards in the past for missing software).
It also doesn't report build numbers, just versions like 9.2
Sooo, what's the best way to handle this?
The missing stuff I'm either going to have to add more fingerprints (very time consuming as I have to go visit the PC's with the software to run the utility) or add local product (in which case I've gotta get the people to send me the .exe and whatnot). Either way, stinks, IMO.
And how should I handle the missing version information? It's in the windows registry at the least, but I'm not sure about the actual VBR info in the file. Do I submit an SR, enhancement request, run the wizard?
Version info is very important for us because it signifies the product patch levels (ie, it doesn't say like: Hi I'm ArcView 9.2 SP3, but rather, I'm 9.2.somethingsomethingsomethng)

Recognition in ZAM - and ZCM - has been, over time, focused more towards business applications than development applications. In that environment, recognition out to the build number is viewed as less relevant; accordingly, most fingerprints tend to report at the "N.N" or "N.N.N" level. The recognition technology is quite capable of reporting out to "N.N.N.N" and indeed that level of granularity is utilized when requested and appropriate. (We pickup the build from the VRB.) Further, when specified, "promotion" fingerprints will automatically discover versions with new build numbers in them and create new products on-the-fly. This type of fingerprint must, however, be engineered by Novell.
Generally, the recognition team has placed less emphasis on SDKs. We tend to make decisions towards products that will have impact on the majority of customers. But, as you've mentioned, we respond to requests for signatures.
From the software local products perspective, if you are gathering "software file" (the ZAM name) or "file scan" (ZCM) data, you shouldn't need to have files sent to you to create a local product. In ZAM 7.5 you can create a local product from the Software Files report in the web console fairly efficiently. It works even better in the ZENworks Control Center of ZCM 10. On a project earlier this year, at a customer site where there is a lot of internal application development and a strong commitment to populating the VRB on every update, we created over 150 local products - with different product names and versions - in about a minute.

Date and version should be generating by

Hello All,
We are also using with IBM websphere portal in our environment.
But this is a Linux question than a product.
For our routine deployment we are doing export/import.
I want to run export by script for both source and target.
Regardless of how many time I run the same script I want export file will be generated by name,date and version #.
First time script will create source_fulltest20091215_1.xml,
if user runs scripts again it will create the name as source_fulltest20091215_2.xml.
Third time script will generates file name as source_fulltest20091215_3.xml
Please notice name of the file its increment by number.
Below is a general format of the script,
if I run exactly same script it will create the file called ‘source_fulltest20091215_1.xml”.
./xmlaccess.sh -in exportBase.xml -out source_fulltest20091215_1.xml -url http://hostname:port#/wps/config -user svc_wpsadmin -password 'helloworld'.
I want date and version should be generating by auto script.
Thanks

Review the output formatting of the date(1) command:
$ man dateand use it to compose part of the filename:
fn=fulltest$(date '+%Y%m%d%H%M')The version number is a bit tricky, there are so many choices about how to do it. One way, assuming you just want the filenames to be unique is to:
if [ -f ${fn} ]; then
   seqno=1
   while [ -f ${fn}_${seqno} ]; do
        seqno=$(expr ${seqno} + 1)
   done
   fn="${fn}_${seqno}"
fiThere are more succinct ways of expressing this, but this way will work everywhere.

8330 and version 5.0

Similar Messages

Maybe you are looking for