[845 Series] problem with 160 GB H.D.D

I have main board 845 ultra-c and when I tried to install and format a 160 GB WD hard drive on it it always stop responding using wd tools or even windows format and I did a bios update before to last version 1.4 and there is no new version and the H.D is defined on the bios without ant parameters just the size 160 GB (no cylinder , head)
so what I can do now ?

http://support.msi.com.tw/
As you said it stops responding and it failed the SMART test which shows there is a fault there is no need to test the other drives if they work fine
http://wdc.custhelp.com/cgi-bin/wdc.cfg/php/enduser/std_adp.php?p_faqid=1048&p_created=1060098616
The Above link is for Western Digital support

Similar Messages

Alpine CDE-103Bt Head Unit and Problem with 160 Gig Ipod Classic

Hi,
2 weeks agao I brought a new Alpine CDE-103BT Head unit for my car. I have owned one of the old 160 gig classics for the last year and a half and at the time I brough the unit I was told this should all work sweet. Indeed all of the documentation from Alpine, and the Sales person, said this would not be a problem.
Unfortunately from Day one, most times after I received a phone call, while playing my ipod, the Head Unit would givesme an "Error-03" message and stop playing my music. I would then have to unplug my ipod, reset it, and plug it back in. Extremely frustrating.
The people I brought the Head Unit from are trying to say its an Ipod problem, yet I never had any problems with it and after I contacted the Australian Ipod help line they said it all appears to be working correctly. The firmware version I was on when I first tried the ipod on the head unit was 1.1.2. The Alpine manual said it should be 1.1.1 (then again you would expect them to be able to cope with updates) so as a last ditch attempt I downgraded the firmware on my ipod to 1.1.1, but it did not make a difference.
The only other thing I have noticed is that I switch the repeat and shuffle settings off when I plug in the unit, but after I unplug it after an Error-03 the Repaet function has been swtiched to all - I am not sure if this is what is causing the problem.
I am getting pretty frustrated with everything and I was wondering if anyone else has come accross this issue and even me helpful had they found a way to fix it.
If not has anyone had any postive expereinces with Alpine head units?
Thanks

Hi,
2 weeks agao I brought a new Alpine CDE-103BT Head unit for my car. I have owned one of the old 160 gig classics for the last year and a half and at the time I brough the unit I was told this should all work sweet. Indeed all of the documentation from Alpine, and the Sales person, said this would not be a problem.
Unfortunately from Day one, most times after I received a phone call, while playing my ipod, the Head Unit would givesme an "Error-03" message and stop playing my music. I would then have to unplug my ipod, reset it, and plug it back in. Extremely frustrating.
The people I brought the Head Unit from are trying to say its an Ipod problem, yet I never had any problems with it and after I contacted the Australian Ipod help line they said it all appears to be working correctly. The firmware version I was on when I first tried the ipod on the head unit was 1.1.2. The Alpine manual said it should be 1.1.1 (then again you would expect them to be able to cope with updates) so as a last ditch attempt I downgraded the firmware on my ipod to 1.1.1, but it did not make a difference.
The only other thing I have noticed is that I switch the repeat and shuffle settings off when I plug in the unit, but after I unplug it after an Error-03 the Repaet function has been swtiched to all - I am not sure if this is what is causing the problem.
I am getting pretty frustrated with everything and I was wondering if anyone else has come accross this issue and even me helpful had they found a way to fix it.
If not has anyone had any postive expereinces with Alpine head units?
Thanks

[nVidia Series] Problems with boot time for p4n sli

I have spent a couple of hours digging trying to find out some information.
I bought the p4n sli (not diamond) and everything seems to work fine, BUT the boot time is very long. It seems to try to access the dvd drive for 30 to 45 seconds and then it will boot. Once it starts to boot I get 4 error code beeps and one that sounds as if it would be the normal everything is good beep (the fifth beep is always different and usually in the middle of the four same tone beeps).
I have a intel 630 cpu, a nvidia 6800gt vid card, one gig of corsair dual channel memory and 1 gig of geil dual channel memory (I get the same errors without the different memory), I have a 450 thermaltake psu, a maxtor 120 gig sata drive and a 160 gig ide drive.
I have no problems with anything once the computer is booted up. It just takes a lot longer to even start to boot than I have seen with modern computers.
The beep codes thread stated that
4 beeps - Timer not operational - bad motherboard
5 beeps - Processor error - bad processor
Would I still be able to run this computer if either of these was true? I would love any advice. I do not want to burn up anything.

Quote from: hcoshawn on 11-January-06, 05:21:01
hey LtDano38,
Im sure that the beeps that you are hearing are on account of the amount of USB devices that you have hooked up. You should get one for every device, the low tone one that you hear is the bios beep saying that everything is normal. The USB beeps should come before the different tone one at the end.
As for the boot time, i would try a different cd-row to see if it does the same. Also is the drive IDE or SATA?
GL and post back.
ok, I do have four usb devices, a flight stick, a nostromo, and usb mouse and keyboard, I have one ide hd, one sata hd and an ide dvd. I tried slaving the dvd off of the hd and with it by itself on the other ide channel. My os is on the ide hd. One last question, can I use anymore abbreviations?

[915 Series] Problem with Live Update 3

I'm having a problem installing MSI's Live Update 3 on my PC. Everytime I install it and reboot the PC, the following happens: boot-up will progress normally through POST, the Windows XP Splash screen, the Welcome Screen, up through the initial load-up of my Windows desktop. But before all the system tray icons finish loading in the taskbar, I will get a blue screen of death and the PC spontaneously reboots, and the cycle will continue infinitely. I know that it is definitely the Live Update software that is causing this, because A) I can boot up into safe mode and the error does not occur until I try to manually start the Live Update software B) the error stops occuring if I (in safe mode) initiate a System Restore and go back before the point where Live Update was installed. I would like to be able to use my Live Update software if possible, but I can't get beyond this system crash with it installed. Any suggestions?

Rename or delete the ntaccess.sys file in \Program Files\MSI\Live Update 3. You will get a error when you run Live Update or Live Monitor about a service not started but just keep clicking OK and it seems to work, although I only download the files and canceled the installation. For online Live Update I think you'll find the file in \Windows\System32. Good luck.

[845 Series] mb msi 848p neo-v problems with sound card

Since I've bought my new MB, I'm experiancing some problems with my sound card. WinAmp and MusicMatch Jukebox ( any version) does not support 5.1 sound system, but playing in stereo system. The soundcard AC97 is OK, cause Winows Media Player is working properly.Does anyone had such problem and solved it?
I must say that I've already used MSI MB, and all APPs worked properly with the same sound card. The difference is that my ex MB was based on old Intel processors, but not Presscot based as this one.

Have you installed the latest driver to
the Realtec soundchip(ALC 655)?

Printing problem with HP deskjet 3050 all in one J610 series

I have a HP deskjet 3050 all in one J610 series which I am using with Windows Vista Version 6.0 (Build 6006: Service pack 2). Connecting is by USB port. I have not used the printer for some time, but have done all the maintence checks & it is good to go. When I want to print a letter the only thing that gets printed is the email address which is coloured blue. I think the problem is in the settings of the printer features. I can print the letter in gray scale but this is not easy to read and not suitable for business dealings.
I would appreciate help with this problem. A definition of the terms used in the printer features might help me resolve it by my self.
Thanks
This question was solved.
View Solution.

Hello @Tellen,
Thank you for visiting the HP Support Forums! I understand you are running into some print quality problems with your HP Deskjet 3050. I see when you attempt to print a letter you will only see the email address and its in blue ink.
First I would like you to click here to download and run the Print and Scan Doctor > www.hp.com/go/tools- It was designed by HP to provide users with the troubleshooting and problem solving features needed to resolve many common problems experienced with HP print and scan products connected to Windows-based computers.
What does the PSDR find? If you are still not getting black text, please continue here: Fixing Print Quality Problems for the HP Deskjet 3050 (J610) All-in-One Printer Series
If after the troubleshooting has been done and you are still seeing the issue leave me with the following information:
1. What is your current Operating system, Windows or Mac and which version?
2. How is the printer connected, USB or Wireless?
3. If you print a test page from the front panel do you see the same issue?
I hope to hear from you soon.
HevnLgh
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

Canon 860 Series (Pixma) Printer Problems with OSX 10.8 (Mountain Lion) – links to Canon Support Site with Drivers and Software with install tips

After spending several hours sorting out Canon Pixma OSX problems here are my thoughts:
Canon 860 Series (Pixma 868) Printer Problems with OSX 10.8 (Mountain Lion) – links to Canon Support Site with Drivers and Software with install tips
Problem:
- New imac and MacBook Pro 2012 (OSX 10.8.2) had a problem using Canon Pixma 868 printer on network and would not scan or print using Canon Pixma software (Pixma MP Navigator 2.1 & Photo Print), which has advanced scanning and photo printing functions.
- When I connected the canon printer to my imac, OSX 10.8.2 automatically downloaded and installed drivers for Canon 860 series printer. I could then add the new printer (select ‘apple menu’ / ‘system preferences’ / ‘print and scan’ / “+”) and printer would work while connected via USB but could not get to print or scan over network wifi.
- The original Canon 860 Series CD does not work with 10.8 and the manual / online instructions did not make sense (as based on CD install).
Solution:
1) Install Canon Printer Drivers and Software (from official Canon site)
Go to canon support site, review FAQ, then download and install following Pixma 860 Series software & drivers for OSX 10.8 (links see below). The version I downloaded is in brackets but check for updated version. Full instructions are below.
Canon 860 Series Drivers & Software for OSX 10.8 Mountain Lion:
The base software and drivers needed for using Canon 860 Series on Mac OS X 10.8 (USB) are
1 Printer Driver
(Canon MX860 series CUPS Printer Driver Ver. 10.67.1.0 (03-Aug-2012))
2 Scanner Driver
(Canon MX860 series Scanner Driver Ver. 14.11.4a (03-Aug-2012))
3 Network Tool
(Canon IJ Network Tool Ver. 4.1.0 for Intel Mac (27-Dec-2012)
Canon Software for using advanced printing and scanning functions (while connected to network)
4 Solution Menu
(Canon Solution Menu Ver. 1.4.1 (27-Jul-2012 ))
5 MP Navigator EX
(Canon MP Nav EX Ver. 2.1.3 (02-Auf-2012))
6 Easy-PhotoPrint EX
(Canon Easy-PhotoPrint EX Ver. 4.1.6 (21-Jan-2013 ))
Canon Support (HK) – check your local site
http://www.canon.com.hk/en/download/main/index.do
Select Product and drivers from support site eg http://support-hk.canon-asia.com/
1. Choose a product category
Multifunctional Printers
2. Choose a product series
Pixma
3. Choose a product model
Pixma MX868
4. Choose type of document
Downloads or FAQ
If you have problems installing the software under 10.8, see the FAQ on Canon site. You will need to allow software installs from “unidentified developers by using “Control” Key or by changing your system preferences)
2) Check Canon Printer and Software Working while connected via USB
Once you have downloaded and installed drivers and software and restarted computer, check that the printer and Canon Pixma software (Pixma MP Navigator 2.1 & Photo Print) are working via USB. Open the Canon IJ Network Tool App (Applications / Canon Utilities /IJ Network Tool / Canon IJ Network Tool App) and make sure you can see the Canon MX 860 series (xx.xx.xx.xx.xx.xx) and that it shows the correct SSID Wifi settings (under the Canon IJ Network Tool App ‘Setup menu’). This is normally done as part of the automatic install but worth double checking
3) Add new network printer using ‘apple menu’ / ‘system preferences’ / ‘print and scan’ / “+”).
After you have checked USB printing turn off printer, unplug the USB cable and shutdown the Canon IJ Network Tool App.
Then turn the printer back on and wait 30s. Then add a new printer using ‘apple menu’ / ‘system preferences’ / ‘print and scan’ / “+”). Once you select “+” (add new printer), wait 10-30s for the Wifi Networked Canon MX 860 Series printer to appear in the new window eg Canon MX 860 series (xx.xx.xx.xx.xx.xx) (Kind: “Canon IJ Network”)
DO NOT ADD THE MX 860 SERIES BONJOUR SCANNER (the Bonjour Scanner is the built-in software, is not needed and often appears first on the add printer list). The Canon scanner can be accessed used through the MP Nav EX Ver. 2.1.3 software (which has much better functions)
You will now have two Printer Canon MX860 (USB) and Canon MX860 (Wifi / Network). Set the Canon MX860 (Wifi / Network) as default and test print and scan
If the Wifi Networked Canon MX 860 Series printer does not appear, check the printer and make sure that the printer can see the wifi network. On the printer select Menu / Settings / Device Settings / Lan Settings / WLAN Setting List. It should say WLAN Active, identify the SSID and have an IP address
If the printer can not see the Wifi Network, plug the USB cable back in, then open the Canon IJ Network Tool App (Applications / Canon Utilities /IJ Network Tool / Canon IJ Network Tool App). Make sure you can see the Canon MX 860 series (xx.xx.xx.xx.xx.xx) and that it has your SSID settings (under setup), if it has this info, restart the computer and the printer and try again

Hi, thaks for response, meant to post as a discussion (not question), wanted to save others time if they get the same problem

Problem with mouse-over value on a column chart (by Series)

Hi.
First of all thanks for any offered tip.
I am having a problem with a column chart.
When I move the mouse over a column it should show a small pop-up (or tip) with the column name (series name) and the value (series value). The problem is that it displays an extra '1' just like the following:
SeriesName
1
X.XXX
How can I remove the extra '1' and only show the name and the value ?
The data is populated by series (manually added).
Mihai.

Hi,
Thanks for the tip Shanthakumar KA.
Yes. It looks like the '1' is coming from the X Axis labels. The chart that I have built does not require any labels on the X Axis, so this was not set (X-Axis labels: Empty). I tried setting this to an empty cell, but the '1' still appears in the mouse-over tip.
It is very weird. If I leave the X-Axis labels empty, I still get the '1' displayed which is very annoing.
Are there any solutions for this except the re-building the tip with a label a.k.a. '[customize the mouse over values|http://xcelsiusandme.blogspot.com/2009/07/xm-sample-7-customizing-mouse-over.html].'
Regards,
Mihai.

Right, MacBook Pro 17" early 2011(Built March) and my new OCZ sata III 6G not working, when is Apple going to admit there is a problem with the Intel's 6 Series Chipset. In System Information it says "Link Speed: 6 Gigabit" which is sata III.

My MacBook Pro 17" early 2011(built March) and my new OCZ sata III 6G are not working together, when is Apple going to admit there is a problem with the Intel's 6 Series Chipset. In System Information it says "Link Speed: 6 Gigabit" which is sata III and in my MacBook Pro it does not work.
Now MacBook Pro 17" early 2011 built May onward do not have this problem it was fixed in the Intel's 6 Series Chipset. (So there is a problem). Cam I have my MacBook Pro fixed please.

After biting the bullet and ordering more RAM, my computer now is working a ton better. So that must have been the main issue. With 8 GB RAM, I can now even run Parallels fluidly (better than my work PC!) where before simple things like logging in to my MBP after reboot could take forever.
The place I went to had several other people getting RAM upgrades at the same time as me, so between this and other comments I've seen in discussions here and elsewhere on the Internets, I take it to mean that either Apple should bump up the base RAM on its new machines, and/or stop charging so much for additional RAM.
I refused to believe a Pro machine bought with Lion installed would come with too little RAM for light to medium usage, but it was apparently the case. I'll mark this as a correct answer and hope some other poor soul will come across this thread and be helped by it.

Candlestick chart problem with multiple series

Hello,
I added one mx:CandlestickSeries object and couple additional
mx:LineSeries objects to the chart. All series are represented but
still I have one problem. More series I add - less candles are
becoming of CandlestickSeries data. It seems that there should be
any scaling option for all series in the chart or something like
this, but I cannot find it. I'm still new in Flex Can anyone halp
me with this?
Thanx in advance
marukas

I've added screenshots to get better view of the problem.
Here is chart with addtional series:
Chart
with multiple series
And here nothing is changed except that additional line
series were removed:
Chart
with only one CandlestickSeries
Is it possible to get the same candles as in 2nd view with
addiotnal series added?

Hi Guys, I have a problem with Rosemount Radar Level Trasnmitter Model 5400 series with Foundation Fieldbus

Hi Guys, I have a problem with Rosemount Radar Level Trasnmitter Model 5400 series with Foundation Fieldbus, the indication of radar in NI-FBUS software configurator was good no Error, but when I try to connect the segment to the Centum VP DCS, the radar lost in the list, but another device in the segment still in the list, only the radar lost from the list.please your advice what make the radar lost in the list?, Thank you
Attachments:
Radar Level Tranmitter 5400FF.pdf ‏516 KB

Hi Nanda,
Would you check if the addresses of the device conflicts with one of the new devices in the cascaded segments?
If this is not the issue, can you try to see what happens if you only use this one device with the same procedure you have done? Just wanna try to narrow down where the problem is. A capture by FBUS Monitor is even better.
Thanks.

Problem with Multiple Series - CFCHART

Using CF9, trying to create a simple chart with two series. Problem is that when there are no values, CFCHART draws a line but with values of "0".
The first series is a set of monthly values (12 values) one for each month in 2011. The second series are also monthly values, but for 2012 YTD (Jan thru May 2012). Range for all values is between 90 and 100, so I have it set to "scale" so you can see if year-over-year is better or worse.
Am trying to plot Series 1 (2011) on one line, and Series 2 on a second line. This allows comparison of year-over-year results. Have two QofQ, one that contains the twelve 2011 values, and one that contains the five 2012 monthly values. X-Axis values are numbers (1-12 for 2011, and 1-5 for 2012). However, I re-format the results using "CreateDate", so CFCHART can recognize a date, and format/display only the "months" on the chart (i.e., JAN, FEB, MAR....... DEC).   This is working, since bottom of chart shows JAN thru DEC.
The chart displays 2011 correctly with 12 points and a line. But for 2012, it displays the 5 points (Jan-May) with their values, then displays Jun-Dec 2012 with values of ZERO. So on the May 2012 plot, you have this big line that runs from 90% in May, down to 0% in Jun, then 0% for the rest of 2012. I only want it to plot the 2012 line thru May.
If you remove the 2011 series from the CFCHART, it displays correctly, and only displays the 5 months in 2012 (Jan-May).   And if you remove the 2012 series, it displays correctly, with all 12 months in 2011.
I just need it to display exactly like that, when two CFCHARTSERIES are used.   Even if you <CFOUTPUT> the 2012 query, you get 5 items, Jan-May. So not sure why it want to chart 12 items for 2012, with all ZEROs for June - Dec 2012.
Appreciate any help/advise on how to get year-over-year lines, with 12 data points for 2011 and 5 for 2012.
Gary

Thanks, I found the solution doing a Google search, which led me to this Adobe forum link:
http://forums.adobe.com/message/3304324#3304324
which is same one you mentioned. I was so relieved it wasn't a problem with my code, I kept testing for errors, couldn't find any.
We are in the process of upgrading from CF7 to CF9. We are developing on CF9, but still using CF7 in production, hopefully for only a few more weeks until we get our new CF/SQL Servers, running CF9.
Until then, have to write two versions of the .CFM file, one that runs on CF7 servers, and one for the CF9 test servers.
Thanks again for getting back, much appreciated.
Gary

Problem with viewing the tv series "Gurren Lagann" in itunes.

When I go to the itunes store and search gurren lagann the page loads fine but when I try to view the complete series itunes stops working. This problem happens with different accounts and on different computers.
the itunes verson that is currently on my inspiron computer is 9.0.3.15
is this a problem with itunes or is it a problem with my computers/accounts?

Fault Module Name: WebKit.dll
Fault Module Version: 5.31.21.8
That's the rendering engine iTunes uses to display the Store contents.
There's a newer version of webkit.dll in the most recent version of Apple Application Support (version 1.4.1 as I write this post). To update your Apple Application Support, the most straightforward procedure would be updating to iTunes 10.1.1.4 ... but if you're not keen on that, we could do it by updating your QuickTime to version 7.6.9 (there's a version 1.4.1 for Apple Application Support in the QuickTime 7.6.9 installer).
If you want to go the QuickTime-update route, here's a link to the download page for QuickTime installers. (Get the installer that doesn't mention QuickTime ... the installer file should be called "QuickTimeInstaller.exe" rather than "iTunesSetup.exe" or "iTunes64Setup.exe".)
http://www.apple.com/quicktime/download/
... does your iTunes behave better with the newer version of webkit.dll in place?

Additional record time problem with series

I cannot record a particular show appearing on a local PBS station beyond the time the show is on. The show is EastEnders & it comes on every Sunday night. There are 2 different episodes, one starts at 11pm & ends at 11:30, the 2nd show starts at 11:30 PM & ends at midnight. There are no episode titles, It appears simply as EastEnders for both time slots in the program guide
When I set up the series recording on my FiOS DVR, I set it to record a specified length of time after the show ends, so I don't miss any of it in case the show runs long. The problem is that although I have set it up correctly, the DVR will not record for any length of time after the 2nd show ends. I have tried setting it to record 15, 30, 60 & 90 minutes after the show ends & it always stops recording just at the point the 2nd show ends. I know it is not the actual DVR at fault as I tried this on both of my DVRs & the same thing happened. Also, this is the only show that I have a problem with. Other shows that I have set up to record longer, do so without a problem.
I have spoken to FiOS tech support several times about this issue & can't resolve it. They said they get calls from customers with issues like mine from time to time, but don't know what the problem is.
Could this have something to do with the way the PBS station communicates it's program guide to Verizon? If so, what exactly is the issue? Is there a fix?
Solved!
Go to Solution.

Try making a manual recording. You can specify the start time, end time, and recurrence on a specified day of the week. That should eliminate any issues the guide may be causing. You can't attach the show's name so it will show up in your list of recordings as a manual recording.

Problems with Zen Vision M Series Media Explorer using 32-bit Vista Home Prem

I'm currently experiences problems with Zen Vision M Series Media Explorer using 32-bit Vista Home Premium. When i'm trying?to burn CD's onto my Zen after?I burn the first one then click to burn another it freezes. Is there any patches i should be downloading to solve this problem??Can anyone help? Please!!!!!!!!
?Message Edited by studandydon on 07-29-20070:38 AM

I have the same problem. It all started yesterday when I was installing the cd drivers in my new computer. I have searched numerous forums and some people had to return the product. Please admins help on this issue as I understand it is very serious.

[845 Series] problem with 160 GB H.D.D

Similar Messages

Maybe you are looking for