870A Fuzion Power has problem with keyboard and mouse movement only in games.

Hey guys,
recently built a new system and chose to go with the 870A Fuzion Power mainboard, everything has gone very smoothly execpt for one problem, only when I play games like Crysis 2 ect the mouse seems to jolt around now and again and the keyboard decides to stop responding if I hold down the movement keys, and this is only in game not surfing the web for example. Now, I am using a wireless mouse and keyboard but I plugged in a PS/2 keyboard and the exact same thing happened. I've installed all of the drivers that came with this board and the drivers for the mouse and keyboard. Any of you guys ever had this sort of problem or know how to fix this?
Thanks.

I bought a new Macbook pro in june 2010, I didn't have any keyboard or mouse issues prior to upgrading to 10.6.4 supposedly this update was made to fix some issues with keyboard and mouse becoming unresponsive. For me the opposite happened. after the upgrade, my keyboard and mouse (trackpad) becomes sometimes partially unresponsive or totally unresponsive. the only way to solve the problem is by completely turning of the computer and turning back on.. granted it doesn't happen very often.. generally once every about 2-3 weeks but it is still annoying though..
I didn't have a chance to use the computer too much on the previous version (10.6.3) so I don't know if it is software related or hardware related.. any thoughts?
Message was edited by: msoued

Similar Messages

Problem with keyboard and mouse pm8m-v

I have gotten this pm8m-v from a freind who knew nothing about computers. He had problems with the keyboard and mouse not responding at start up or just freeze on him. So I check it out, called MSI and even sent it to them, they claimed that there was nothing wrong with the board. So here are the specs of the computer now:
pm8m-v motherboard
2-256MB memory PC-2700 DDR 333Mhz
intel P4 2.6GHz
codegen power supply 300W
gateway CDW
western digital 40 harddrive
the rest is on board stuff
the problem is still there and it is driving me crazy, can you please help?

I had the same problem with the PM8M-V, today as a matter of fact, and I kept getting locked up at the point where I had to hit enter to load the WinXP CD to setup the system. After finding this topic I tried a different keyboard. The one that was being used was a Kennsiington PS2 cheapo, I swapped it for a Microsoft (one of those ergonomic styles and I've had it for a long time) Keyboard PS2, and the problem went away. I'm typing on the Kennsington right now, so it's fine just wasn't liked by the PM8M-V for some reason.

Tp ended with error code 0247 - addtobuffer has problems with data- and/or

Hello Experts,
If you give some idea, it will be greatly appreciated.
This transported issue started coming after power outage, sap system went hard shutdown.
Then we brought up the system. Before that , we do not have this transport issue.
our TMS landscape is
DEV QA-PRD
SED-SEQSEP
DEV is having the TMS domain controller.
FYI:
*At OS level, when we do scp command using root user, it is fine for any TR.
In STMS, while adding TR in SEQ(QA system), we are getting error like this.
Error:
Transport control program tp ended with error code 0247
     Message no. XT200
Diagnosis
     An error occurred when executing a tp command.
       Command:        ADDTOBUFFER SEDK906339 SEQ client010 pf=/us
       Return code:    0247
       Error text:     addtobuffer has problems with data- and/or
       Request:        SEDK906339
System Response
     The function terminates.
Procedure
     Correct the error and execute the command again if necessary.
This is tp version 372.04.71 (release 700, unicode enabled)
Addtobuffer failed for SEDK906339.
Neither datafile nor cofile exist (cofile may also be corrupted).
standard output from tp and from tools called by tp:
tp returncode summary:
TOOLS: Highest return code of single steps was: 0
ERRORS: Highest tp internal error was: 0247

when we do scp using sm69,
SEDADM@DEVSYS:/usr/sap/trans/cofiles/K906339.SED SEQADM@QASYS:/usr/sap/trans/cofiles/.
it throws the error like below,
Host key verification failed.
                                                                                External program terminated with exit code 1
Thanks
Praba

I bought a 2009 IMac and I don't know how to turn it on. It has a wired keyboard and mouse

I bought a 2009 IMac and I don't know how to turn it on. It has a wired keyboard and mouse

Reach under and behind the bottom, left corner and feel for the indented power switch.

Problem with keyboard and audio on Satellite L40

Hi everybody,
I just installed XP SP2 on my Satellite L40 (BTW thanx to all you that have helped me overcome the problems during this operation with your threads), but I have some problem with my keyboard. I have an azerty keyboard and after I installed xp, it worked as a qwerty, I repared it, now all my letters are working fine, but i have some problems with some symbols, such as @, !, _,if you understand me.
Could somebody help me???
I also have problems with my audio, in fact I have no audio at all, in control panel it says that no audio device is found.
I saw some threads that said that I should first install kb888111, and another likely thing, but i can't find the other one. I've downloaded the sound driver from the toshiba website; thanx for helping me in that field also.
bye

I have the same problem with sound...I have found hotfix kb888111 and I instaled that one...but when i wanted to start instaling sound driver a popup window say thet there is some error and can't continue with instaling sound driver...
I found hotfix kb888111 in this folder which i have downladed from toshiba site: english\sound driver\mshdqfe\win2k_xp\us\kb888111xps2....
i do not know what to do.....Does anybody else knows....

Hi, I was trying to run the trial program the Flash Pro after downloaded, but it pops up with this message that it has problem with lisensing and the error code is 213:19. What should I do?

PLEASE HELP ME OUT;(

even though this is not for flash, use the solutions - Error 213:19 | Problem has occurred with the licensing of this product

Strange problem with RDP and mouse, only solved after minimize/maximize

Good day,
We have this very annoying problem with a RDP Terminal Server. It is Windows Server 2008 R2 SP1.
This server has the Session Host role installed, with local RDP user licenses.
We only have this issue when running a certain application.
This application is called Rockwell FactoryTalk View and this in an application to display industrial processes.
It will take the Full Screen in a fixed resolution and will display buttons, objects, values... The application also uses Internet Explorer cache so I think it uses ActiveX, Flash or Java, I don't know.
What sometimes happens is this:
- The mouse point is able to move in the entire screen (good)
- The mouse button will only work in 1 certain area of the screen (which is a small rectangle)
- The mouse "hovering" above objects will also only highlight items that are in this rectangle
- The keyboard remains functional and with alt-tab other objects or other applications can get focus, but still no mouse clicking
The problem can be solved by:
- Minimizing the RDP window and maximizing it again
- Or: Sending a message to the session using task manager, after clicking "OK" on that message the problem is gone
Normally, about 5 users will have this application opened in their session, the "crash" is only effecting 1 session.
The problem seems to happen randomly and we don't know if we should point to the FactoryTalk application, or to Terminal Services/RDP. The end users have no rights to minimize/maximize, this is not the solution.
Is it possible to have any input on this please?
Thank you.

Hi,
Thank you for posting in Windows Server Forum.
Firstly please check with the application support team whether the application is fully supported by Windows Server 2008 R2 in remote session. In addition, suggest you to update the client RDP version to RDP 8.1 and check the result for better feature and functionality.
Apart from this, there is Hotfix for the issue. Please download, install and check the result.
Cause:
The issue occurs because the remote desktop ActiveX object does not deactivate the focus of the remote desktop session when the focus is lost. Because the focus is still activated, the remote desktop ActiveX object cannot set the focus of the remote desktop
session again when you change the focus back to the session.
A remote desktop session does not respond to keyboard input or mouse input after it loses the focus in Windows 7 or in Windows Server 2008 R2
http://support.microsoft.com/kb/2579381
Hope it helps!
Thanks.
Dharmesh Solanki

Problem with "Keybord and Mouse" on Preference Pane

I can't open "Keybord and Mouse" on Preference Pane.
When I click on it, it doesn't open, just keeps loading until I click any other option except "Keybord and Mouse". Otherwise it opens an empty preference pane window, displaying nothing but the gray background.
I can't access any keybord or mouse configuration. How do I fix it?

Hi, did anyone fix this problem yet?
My problem is that i copied the 10.5.2 HD from my old Macbook to my new MBP (with the new multitouch trackpad) to save time and to avoid a new install. Everything works except the mouse and keyboad preference pane. It seems that the demos for the swipe etc are non existent, and therefore the UI does not seem to work. This seems to make sense, as the Macbook did not have the options for multitouch. Does anyone know how to fix this? Is there any way I can reinstall the missing components to avoid a fresh install?
Thanks alot for help. You can save my time
Cheers, André

Problem with keyboard and IsReadOnly on a TextBox

The problem is that the Keyboard doesn't show up when focus on a TexBox following this steps:
1- On Page_Loaded set the TextBox property IsReadOnly = true (so you can't write/edit)
2- Try focus on the TextBox (important)
3- Tap a button that contains theTextBox.IsReadOnly = false;
4- Tap TextBox. Keyboard won't appear
This is on a Windows Phone 8.1 Runtime app
In fact it won't appear on any other control that previous had IsReadOnly = true, not only this TextBox

Hi SuNcO,
If I follow your step1->step2->step3->step4, then I can reproduce your issue in my side, if I follow your step1->step3->step4, then it works very well with the Keyboard.
I will do the further test and consult to see if there is any workaround.
Thanks for your understanding.
Best Regards,
Amy Peng
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.
Hey there,
I'm having this issue as well - although the steps are a little different.
I have a TextBox that's set to IsReadOnly = true in my XAML with a doubletap event wired to it.
I double tap the TextBox, the event fires and the IsReadOnly property gets set to true. However, I can't enter any text into the text box and the keyboard doesn't appear.

Using xorg 1.5 in testing with some problem with keyboard and mplayer

I have the following lines in my xorg's log file:
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(WW) RADEON(0): R500 support is under development. Please report any issues to [email protected]
(WW) RADEON(0): LVDS Info:
(WW) RADEON(0): Unknown vendor-specific block f
(WW) RADEON(0): Unknown vendor-specific block f
(WW) RADEON(0): DRI init changed memory map, adjusting ...
(WW) RADEON(0): MC_FB_LOCATION was: 0xdbffd800 is: 0xdbffd800
(WW) RADEON(0): MC_AGP_LOCATION was: 0x003f0000 is: 0xffffffc0
(WW) Warning, couldn't open module evdev
(EE) Failed to load module "evdev" (module does not exist, 0)
(EE) No input driver matching `evdev'
(EE) config/hal: NewInputDeviceRequest failed
(WW) Warning, couldn't open module evdev
(EE) Failed to load module "evdev" (module does not exist, 0)
(EE) No input driver matching `evdev'
(EE) config/hal: NewInputDeviceRequest failed
(WW) Warning, couldn't open module evdev
(EE) Failed to load module "evdev" (module does not exist, 0)
(EE) No input driver matching `evdev'
(EE) config/hal: NewInputDeviceRequest failed
(WW) Warning, couldn't open module evdev
(EE) Failed to load module "evdev" (module does not exist, 0)
(EE) No input driver matching `evdev'
(EE) config/hal: NewInputDeviceRequest failed
(WW) Warning, couldn't open module evdev
(EE) Failed to load module "evdev" (module does not exist, 0)
(EE) No input driver matching `evdev'
(EE) config/hal: NewInputDeviceRequest failed
(WW) Warning, couldn't open module evdev
(EE) Failed to load module "evdev" (module does not exist, 0)
(EE) No input driver matching `evdev'
(EE) config/hal: NewInputDeviceRequest failed
(WW) Warning, couldn't open module evdev
(EE) Failed to load module "evdev" (module does not exist, 0)
(EE) No input driver matching `evdev'
(EE) config/hal: NewInputDeviceRequest failed
(WW) Warning, couldn't open module evdev
(EE) Failed to load module "evdev" (module does not exist, 0)
(EE) No input driver matching `evdev'
(EE) config/hal: NewInputDeviceRequest failed
(WW) RADEON(0): Unknown vendor-specific block f
(WW) RADEON(0): Unknown vendor-specific block f
1. my notebook's keyboard works well now, but when I see above error, I installed xf86-input-evdev package, then strange thing happened: when I press the up arrow key, gnome-screenshot was opened, so I cannot use the "Up" key,:( then I have to uninstall the xf86-input-evdev, but I donot know why there are error messages as shown above.
2. The radeon driver works fine for me ---- at least I think so ----, but I cannot use mplayer -vo gl:yuv=4:lscale=1 somemediafile to play, cause it is too slow
it says:
do_wait: drmWaitVBlank returned -1, IRQs don't seem to be working correctly.
Try adjusting the vblank_mode configuration parameter.
my video card is x1300 on Lenovo T60.
here is my xorg.conf:
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Synaptics Touchpad" "SendCoreEvents"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/75dpi:unscaled"
FontPath "/usr/share/fonts/TTF"
FontPath "/usr/share/fonts/Type1"
EndSection
Section "Module"
Load "extmod"
Load "dbe"
Load "xtrap"
Load "dri"
Load "glx"
Load "drm"
Load "freetype"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
# Option "Protocol" "auto"
Option "Protocol" "ExplorerPS/2"
Option "Device" "/dev/input/mice"
Option "Emulate3Buttons"
Option "Emulate3Timeout" "50"
Option "EmulateWheel" "on"
Option "EmulateWheelButton" "2"
Option "EmulateWheelTimeOut" "200"
Option "YAxisMapping" "4 5"
Option "XAxisMapping" "6 7"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
Identifier "Synaptics Touchpad"
Driver "synaptics"
# Option "Device" "/dev/input/mouse2"
Option "Device" "/dev/psaux"
Option "Protocol" "auto-dev"
Option "TouchpadOff" "1"
Option "SHMConfig" "true"
EndSection
Section "Monitor"
#DisplaySize 290 210 # mm
Identifier "Monitor0"
VendorName "LEN"
ModelName "4020"
Option "DPMS"
# 1024x768 96dpi
DisplaySize 270 203
EndSection
Section "Device"
Identifier "Card0"
Driver "radeon"
VendorName "ATI Technologies Inc"
BoardName "M52 [Mobility Radeon X1300]"
BusID "PCI:1:0:0"
Option "DRI" "true"
Option "AGPMode" "4"
Option "EnablePageFlip" "on"
Option "ColorTiling" "on"
Option "DynamicClocks" "on"
Option "AccelMethod" "EXA"
EndSection
Section "DRI"
Mode 0666
EndSection
Section "Extensions"
# Option "Composite" "0"
Option "XVideo" "Enable"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 1
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 4
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 8
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 15
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
Modes "1024x768"
EndSubSection
EndSection

sm4tik wrote:Have a look at http://bbs.archlinux.org/viewtopic.php?id=54568
I decided to keep the old drivers and just ignore the error. I read a dozen mail list entries etc before reverting back, and it seems laptop keyboards are often quite tricky to get working correctly. Also using a non english layout will cause some extra effort.. My suggestion is to uninstall evdev and stick to the old drivers until there's a real reason to switch to evdev.
Well, after follow the post you gave.
I think that evdev now is really sucks!
I agree with you, as long as my whole computer works, I donot care such errors.

TS3899 Ios 6.1 has problem with wifi and battery drain. Want to go bac to ios 6.0

Have been having a lot of battery drain in my ipad and also intermittent wifi

Mperez3100 wrote:
Hi,
How can I Test my iPad WiFi & battery? is there a hardware test?
A real easy test...
Using the battery level meter in this manner is comparable to using your car's fuel gauge to calculate miles per gallon. The only thing that matters is the total amount of operating time from full charge to auto-shutdown.
Use the wall-mount charger that came with the iPad and charge overnight. Admittedly the labeling is hard to read but, if you use a magnifier and squint your eyes, you'll see "Output 5.1V, 2.1A." The symbol between volts and amps is the symbol for DC. Do NOT use an iPhone charger. Do NOT use an iPod charger. Then, operate it normally until auto shut-down (ignore any low level alerts that may appear). An irony is that doing that test to determine the total operating time is also the exact procedure necessary to calibrate the battery level meter.
I'm not claiming that you do not have a problem. I am stating, however, that we don't yet know whether or not a battery problem exists.
According to Apple:
Use Your iPad Regularly
For proper reporting of the battery’s state of charge, be sure to go through at least one charge cycle per month (charging the battery to 100% and then completely running it down).
Elsewhere, Apple elaborates and explains that two half-discharges (or four quarter-discharges, etc.) equals one full discharge.

My early macbook air has problems with mail and safari

When I try to open either mail or safari, each crashes with a message "safari (or mail) quit unexpectedly. This is a very recent problem.

This article addresses Safari quitting unexpectedly and suggests a remedy: http://support.apple.com/kb/PH11931
Yes, you have the latest Safari, so I believe this will help.
Here are some troubleshooting tips for mail: http://support.apple.com/kb/TS3276

Why FireFox 3.6 has problem with expand and colapsed in sharepoint data view?

I used an script in this page http://www.sgnec.net/pages/customers/customers.aspx. It worked well. but now I found it doesn't work with Firefox 3.6 . when I clicked plus image it doesn't collapsed.
thanks
Leila

Try the Firefox Portable support forum. <br />
http://portableapps.com/forums/support/firefox_portable

Problem with JScrollPane and Mouse Event in JDK 1.4

The folowing code works fine with JDK 1.3. But not with JDK 1.4. It has got a JPanel(main panel) which hosts JScrollPane which hosts another JPanel (drawing Panel). If I remove(do not add) JScrollPane to the main Panel and ad drawing panel directly to the main panel, it works.
Thanks.
In order to replicate the exact scenario, I have modified Sun's tutorial ScrollDemo2.java
* This code is based on an example provided by John Vella,
* a tutorial reader.
import javax.swing.*;
import javax.swing.event.MouseInputAdapter;
import java.awt.*;
import java.awt.event.*;
import java.util.*;
public class ScrollDemo2 extends JPanel {
private Dimension size; // indicates size taken up by graphics
private Vector objects; // rectangular coordinates used to draw graphics
private final Color colors[] = {
Color.red, Color.blue, Color.green, Color.orange,
Color.cyan, Color.magenta, Color.darkGray, Color.yellow};
private final int color_n = colors.length;
JPanel drawingArea;
public ScrollDemo2() {
setOpaque(true);
size = new Dimension(0,0);
objects = new Vector();
//Set up the instructions.
JLabel instructionsLeft = new JLabel(
"Click left mouse button to place a circle.");
JLabel instructionsRight = new JLabel(
"Click right mouse button to clear drawing area.");
JPanel instructionPanel = new JPanel(new GridLayout(0,1));
instructionPanel.add(instructionsLeft);
instructionPanel.add(instructionsRight);
class MyScrollPane extends JScrollPane
MyScrollPane(JPanel drawingArea)
super(drawingArea);
public void grabFocus()
super.grabFocus();
public void requestFocus()
super.requestFocus();
protected void processFocusEvent(FocusEvent e)
if ( e.getID() == FocusEvent.FOCUS_GAINED )
int i = 0;
else
if( e.getID() == FocusEvent.FOCUS_LOST )
int i = 0;
super.processFocusEvent(e);
//Set up the drawing area.
drawingArea = new JPanel() {
protected void paintComponent(Graphics g) {
super.paintComponent(g);
Rectangle rect;
for (int i = 0; i < objects.size(); i++) {
rect = (Rectangle)objects.elementAt(i);
g.setColor(colors[(i % color_n)]);
g.fillOval(rect.x, rect.y, rect.width, rect.height);
g.drawString("Hello",100,100);
protected void processMouseEvent(MouseEvent pEvent)
if(pEvent.getID() == pEvent.MOUSE_PRESSED)
super.processMouseEvent(pEvent);
else
super.processMouseEvent(pEvent);
drawingArea.setBackground(Color.LIGHT_GRAY);
addMouseListener(new MyMouseListener());
//Put the drawing area in a scroll pane.
JScrollPane scroller = new MyScrollPane(drawingArea);
scroller.setPreferredSize(new Dimension(200,200));
setLayout(new BorderLayout());
add(scroller, BorderLayout.CENTER);
//If the above line is commented and the line bellow will be uncommented it works.
//add(drawingArea, BorderLayout.CENTER);
protected void processMouseEvent(MouseEvent pEvent)
if(pEvent.getID() == pEvent.MOUSE_PRESSED)
super.processMouseEvent(pEvent);
else
super.processMouseEvent(pEvent);
class MyMouseListener extends MouseInputAdapter {
final int W = 100;
final int H = 100;
public void mouseReleased(MouseEvent e) {
boolean changed = false;
if (SwingUtilities.isRightMouseButton(e)) {
// This will clear the graphic objects.
objects.removeAllElements();
size.width=0;
size.height=0;
changed = true;
} else {
int x = e.getX() - W/2;
int y = e.getY() - H/2;
if (x < 0) x = 0;
if (y < 0) y = 0;
Rectangle rect = new Rectangle(x, y, W, H);
objects.addElement(rect);
drawingArea.scrollRectToVisible(rect);
int this_width = (x + W + 2);
if (this_width > size.width)
{size.width = this_width; changed=true;}
int this_height = (y + H + 2);
if (this_height > size.height)
{size.height = this_height; changed=true;}
if (changed) {
//Update client's preferred size because
//the area taken up by the graphics has
//gotten larger or smaller (if cleared).
drawingArea.setPreferredSize(size);
//Let the scroll pane know to update itself
//and its scrollbars.
drawingArea.revalidate();
drawingArea.repaint();
public static void main (String args[]) {
JFrame frame = new JFrame("ScrollDemo2");
frame.addWindowListener(new WindowAdapter() {
public void windowClosing(WindowEvent e) {System.exit(0);}
frame.setContentPane(new ScrollDemo2());
frame.pack();
frame.setVisible(true);

I tried it . It didn't work.
Thanks for the suggestionI've got it... I know that inside the paitComponet method you can't call setSize() in jdk1.4, but you could in previous versions... that has caused al lot of problems to me...
Abraham

Problem with TC and Mouse

Whenever I am using Time Machine to backup to my Time Capsule my external mouse becomes unreliable, this happens with both my logitech USB mouse and my bluetooth magic mouse. This did not happen when I was using an external drive connected to firewire for my backups. Additionally the trackpad on the laptop works fine.
Any ideas?

My problem is almost the same:
Using Time Capsule (MC343) with USB connected wireless mouse on Snow Leopard, MB-Pro - when Time Machine starts to write backup mouse cursor jumps around the screen, like movement reading is delayed by something.
When I use my external hard-drive connected via USB for backups this problem doesn't occur.

870A Fuzion Power has problem with keyboard and mouse movement only in games.

Similar Messages

Maybe you are looking for