881W Wireless not broadcasting

Question

Hi,
I have a 881W and I have it working on the internet, my issue is I cannot seem to get the wireless working.  i have sessioned into the internal AP, setup everything I thought I needed through CLI.  I then went into CCP and told the SSID to broadcast, but I do not see the network to connect to it.  I have looked through the Cisco documentation and it is just not making sense to me, I have done what I believe it has said to do, but it does not go through a complete setup...it is quite broken up with links to other pages and other chapters of other configuration guides.
Here is my config below, thank you for the help!!!  Router first then AP...
ROUTER
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
hostname rtlynva-wyndhurst
boot-start-marker
boot-end-marker
logging message-counter syslog
logging buffered 51200 warnings
enable secret 5 $1$ajy3$9xxPp7F35NGOHmtyLOr3v/
no aaa new-model
crypto pki trustpoint TP-self-signed-34574604
enrollment selfsigned
subject-name cn=IOS-Self-Signed-Certificate-34574604
revocation-check none
rsakeypair TP-self-signed-34574604
crypto pki certificate chain TP-self-signed-34574604
certificate self-signed 01
  30820255 308201BE A0030201 02020101 300D0609 2A864886 F70D0101 04050030
  2F312D30 2B060355 04031324 494F532D 53656C66 2D536967 6E65642D 43657274
  69666963 6174652D 33343537 34363034 301E170D 31313031 30343032 35343037
  5A170D32 30303130 31303030 3030305A 302F312D 302B0603 55040313 24494F53
  2D53656C 662D5369 676E6564 2D436572 74696669 63617465 2D333435 37343630
  3430819F 300D0609 2A864886 F70D0101 01050003 818D0030 81890281 8100A6B9
  53B6E265 A15554AA B99534F4 50A2020C 25B6961B 4AD0719F 9F6C1004 F5445531
  A04CC0DB 2128D5B8 AFF9AD8E 7A73DE60 D6530CE2 1F7C7DD1 2EF91A11 7F6F38B8
  C853F54D B119589C E7479515 FC233F20 9CD98562 D3787BFA 014279D6 E058E885
  F498A1FE 00E03FE2 69DF9EC8 B784F644 2348C423 2BA30D7F 1561A520 6A1B0203
  010001A3 8180307E 300F0603 551D1301 01FF0405 30030101 FF302B06 03551D11
  04243022 82207274 6C796E76 612D7779 6E646875 7273742E 796F7572 646F6D61
  696E2E63 6F6D301F 0603551D 23041830 16801463 4EF9DCBC 3B65F277 ADB58EC1
  FAB84002 F9D3ED30 1D060355 1D0E0416 0414634E F9DCBC3B 65F277AD B58EC1FA
  B84002F9 D3ED300D 06092A86 4886F70D 01010405 00038181 005971CF 7B232539
  A2E311B3 FF961AED F5192840 94B6B961 361C08CC D6AF21C6 91131D67 CAF2A11F
  C14E7053 BDEC3273 8871D4F3 59EF954A 8A2D9BCF 6FCCE062 13C4C60A 655BD8D7
  038C67EE 6BDAFC6F C1B99A82 E7AB5244 40FC00C6 480FE807 5303BCE1 8B375D2E
  43680186 5857756A B32A1AB3 2F8780B4 E0FD7067 73CD496B CE
        quit
ip source-route
ip dhcp excluded-address 192.168.1.1
ip dhcp pool LAN
   import all
   network 192.168.1.0 255.255.255.0
   default-router 192.168.1.1
   domain-name lynch.us
   dns-server 68.87.73.246
   lease 0 2
ip cef
no ip domain lookup
ip domain name yourdomain.com
username admin privilege 15 secret 5 $1$W6jT$K0cl.ncxyQf4Nw7yy4ZU.0
archive
log config
  hidekeys
class-map type inspect match-all ccp-invalid-src
interface FastEthernet0
interface FastEthernet1
interface FastEthernet2
interface FastEthernet3
interface FastEthernet4
description $FW_OUTSIDE$$ES_WAN$
ip address dhcp client-id FastEthernet4
ip nat outside
ip virtual-reassembly
duplex auto
speed auto
interface wlan-ap0
description Service module interface to manage the embedded AP
ip unnumbered Vlan1
arp timeout 0
interface Wlan-GigabitEthernet0
description Internal switch interface connecting to the embedded AP
switchport mode trunk
interface Vlan1
description $ETH-SW-LAUNCH$$INTF-INFO-HWIC 4ESW$$FW_INSIDE$
ip address 192.168.1.1 255.255.255.0
ip nat inside
ip virtual-reassembly
ip tcp adjust-mss 1452
ip forward-protocol nd
ip http server
ip http access-class 23
ip http authentication local
ip http secure-server
ip http timeout-policy idle 60 life 86400 requests 10000
ip nat inside source list 101 interface FastEthernet4 overload
access-list 100 remark CCP_ACL Category=128
access-list 100 permit ip host 255.255.255.255 any
access-list 100 permit ip 127.0.0.0 0.255.255.255 any
access-list 101 permit ip 192.168.1.0 0.0.0.255 any
no cdp run
control-plane
banner exec ^C
% Password expiration warning.
Cisco Configuration Professional (Cisco CP) is installed on this device
and it provides the default username "cisco" for  one-time use. If you have
already used the username "cisco" to login to the router and your IOS image
supports the "one-time" user option, then this username has already expired.
You will not be able to login to the router with this username after you exit
this session.
It is strongly suggested that you create a new username with a privilege level
of 15 using the following command.
username <myuser> privilege 15 secret 0 <mypassword>
Replace <myuser> and <mypassword> with the username and password you
want to use.
^C
banner login ^C
Cisco Configuration Professional (Cisco CP) is installed on this device.
This feature requires the one-time use of the username "cisco" with the
password "cisco". These default credentials have a privilege level of 15.
YOU MUST USE CISCO CP or the CISCO IOS CLI TO CHANGE THESE
PUBLICLY-KNOWN CREDENTIALS
Here are the Cisco IOS commands.
username <myuser>  privilege 15 secret 0 <mypassword>
no username cisco
Replace <myuser> and <mypassword> with the username and password you want
to use.
IF YOU DO NOT CHANGE THE PUBLICLY-KNOWN CREDENTIALS, YOU WILL
NOT BE ABLE TO LOG INTO THE DEVICE AGAIN AFTER YOU HAVE LOGGED OFF.
For more information about Cisco CP please follow the instructions in the
QUICK START GUIDE for your router or go to http://www.cisco.com/go/ciscocp
^C
line con 0
login local
no modem enable
line aux 0
line 2
no activation-character
no exec
transport preferred none
transport input all
line vty 0 4
privilege level 15
login local
transport input telnet ssh
scheduler max-task-time 5000
end
rtlynva-wyndhurst#
AP CONFIG
version 12.4
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
hostname ap
enable secret 5 $1$BCSZ$aSQUBKS8ktvSFOoPDmfB80
no aaa new-model
dot11 ssid EARL
   vlan 1
   authentication open
username admin privilege 15 secret 5 $1$9YSG$N5f/uYAu.aNWKjXKG9SRD1
bridge irb
interface Dot11Radio0
no ip address
no ip route-cache
ssid EARL
speed  basic-1.0 2.0 5.5 11.0 6.0 9.0 12.0 18.0 24.0 36.0 48.0 54.0 m0. m1. m2. m3. m4. m8. m9. m10. m11. m12. m13. m14. m15.
station-role root
interface Dot11Radio0.1
encapsulation dot1Q 1 native
no ip route-cache
bridge-group 1
bridge-group 1 subscriber-loop-control
bridge-group 1 block-unknown-source
no bridge-group 1 source-learning
no bridge-group 1 unicast-flooding
bridge-group 1 spanning-disabled
interface GigabitEthernet0
description the embedded AP GigabitEthernet 0 is an internal interface connecting AP with the host router
no ip address
no ip route-cache
interface GigabitEthernet0.1
encapsulation dot1Q 1 native
no ip route-cache
bridge-group 1
no bridge-group 1 source-learning
bridge-group 1 spanning-disabled
interface BVI1
ip address dhcp client-id GigabitEthernet0
no ip route-cache
ip http server
no ip http secure-server
ip http help-path http://www.cisco.com/warp/public/779/smbiz/prodconfig/help/eag
bridge 1 route ip
banner login ^CC
% Password change notice.
Default username/password setup on AP is cisco/cisco with privilege level 15.
It is strongly suggested that you create a new username with privilege level
15 using the following command for console security.
username <myuser> privilege 15 secret 0 <mypassword>
no username cisco
Replace <myuser> and <mypassword> with the username and password you want to
use. After you change your username/password you can turn off this message
by configuring  "no banner login" and "no banner exec" in privileged mode.
^C
line con 0
privilege level 15
login local
no activation-character
line vty 0 4
login local
end

Answer 1

Chuck,
    From the AP config, it's not being told to broadcast.  session back to the AP and the command guest-mode under dot11 ssid EARL
Cheers,
Steve
Please remember to rate usefull posts