8i Database link

Is it possible to fetch data from 7.3 into 8i using database link? My database link will be created in 8i database and my remote database would be 7.3 and this is what I did.
# TNSNAMES.ORA Network Configuration File: C:\oracle\ora81\network\admin\tnsnames.ora
# Generated by Oracle configuration tools.
NDI1x =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = 128.1.1.1)(PORT = 1521))
(CONNECT_DATA =
(SID = ndi1x)
Oracle8i Enterprise Edition Release 8.1.7.0.0 - Production
With the Partitioning option
JServer Release 8.1.7.0.0 - Production
SQL> create database link ndi1x
2 connect to delta identified by foxtrot
3 using 'ndi1x';
Database link created.
SQL> select db_link from dba_db_links;
DB_LINK
NDI1X.US.ORACLE.COM
SQL> desc ar_accounts@ndi1x;
ERROR:
ORA-02019: connection description for remote database not found
I just wonder where or what would be the problem?
Any links would greatly help.
Thanks

If you are sure that NDI1x alias works, that is you're able to connect from Sql*Plus 8i using it, then try
SQL> select count(*) from ar_accounts@ndi1x;
I remember of problems with desc on those versions, but the link worked.

Similar Messages

Using database-link in view to get around ORA-01031 error

I have been granted select rights on a users table. I am therefore able to select from his table. If however I try create a view against his table I run into the ORA-01031 problem. I have worked around this problem by creating a database-link to myself and then adding that to the view creation and it works. What are the downsides of using the database-link in this way?

The only down side I have been able to identify is that a extra session is created and that the CPU has a little extra work due to the LOOP BACK that takes place. I need to ensure the network is not unnessesarly used and therefore will need to ensure that 127.0.0.1 (local host) is used in the database connection discription. e.g.
create database link my_db_link connect to scott identified by tiger using '(description=(address=(protocol=tcp)(host=127.0.0.1) (Port = 1521) ) (connect_data= (sid=ora10g)))';

ERROR WHILE CREATING A DATABASE LINK USING HETEROGENEOUS SERVICES

I'm creating a database link with the Oracle Dataware Builder, and i get the following error:
Probando...
Fallo.
SQL Exception
Error del repositorio: Excepción SQL.
Nombre de la Clase: CacheMediator.
Nombre del Método: getDDEntryFromDB.
Mensaje de Error del Repositorio: ORA-28500: connection from ORACLE to a non-Oracle system returned this message:
[Generic Connectivity Using ODBC][Informix][Informix ODBC Driver][Informix]Incorrect password or user [email protected] is not known on the database server. (SQL State: 28000; SQL Code: -951)
ORA-02063: preceding 2 lines from PRUEBA_SEH
As you can see i'm using heterogeneus services to connect to a informix database. ALTIADM is a valid user for that database, i don't send my ip address 192.168.0.62, but the error says "[email protected] is not known in the database server". how can i solve it?????

Right places to ask this question are
Heterogeneous Connectivity
Warehouse Builder

ERROR WHILE CREATING A DATABASE LINK TO INFORMIX

I'm creating a database link with the Oracle Dataware Builder, and i get the following error:
Probando...
Fallo.
SQL Exception
Error del repositorio: Excepción SQL.
Nombre de la Clase: CacheMediator.
Nombre del Método: getDDEntryFromDB.
Mensaje de Error del Repositorio: ORA-28500: connection from ORACLE to a non-Oracle system returned this message:
[Generic Connectivity Using ODBC][Informix][Informix ODBC Driver][Informix]Incorrect password or user [email protected] is not known on the database server. (SQL State: 28000; SQL Code: -951)
ORA-02063: preceding 2 lines from PRUEBA_SEH
As you can see i'm using heterogeneus services to connect to a informix database. ALTIADM is a valid user for that database, i don't send my ip address 192.168.0.62, but the error says "[email protected] is not known in the database server". how can i solve it?????

Right places to ask this question are
Heterogeneous Connectivity
Warehouse Builder

Creation of Database link and access the same plus Snapshot creation

i want talk between two oracle server. i decided to go for snapshot creation with periodical refresh. For which i am having two oracle server's with different ip address located inside our office setup.
I have created a database link between two servers.
first server name global
userid scott
password tiger
second server name asil
userid scott
password tiger
both the user have been given dba rights.
in both the server the services and listners are all started. i gave the following command to create database link.
from asil server
create public database link global connect by scott identified by tiger using 'global'
the command was successful and the link was created. Now i tried to access a table of the scott user of the global server.
select * from emp@global;
now it is giving error. I want to know how the link can be created and how it can be accessed. i refered the 8i online documentation and done the things based on that. i expect valuble solution from all possible persons
null

A reason for this problem could be that your database is configured that a database link has to have exactly the same name like the global name of the database instance it should connect to.
Can you please provide the oracle error code / message ? With this information there might be more hints I can give you.

20 Index Restriction on Remote Tables (i.e. using Database Links)

The Oracle Database Administrator's Guides for 10g and 11g document a performance restriction that "No more than 20 indexes are considered for a remote table." If I go back to the 8i documentation it says "In cost-based optimization, no more than 20 indexes per remote table are considered when generating query plans. The order of the indexes varies; if the 20-index limitation is exceeded, random variation in query plans may result."
Does anyone have more details on this performance restriction? In particular I am trying to answer these questions:
1) Are the 20 indexes which are considered by the CBO still random in 10g?
2) Can I influence which indexes are considered with index hints or will my hints only be considered if they are for one of the "random" 20 indexes which are being considered by the CBO?
3) Are there any other approaches or work-arounds to this restriction assuming you need to select from a large remote table with more than 20 indexes (and need to perform the selection using 1 of those indexes to get adequate performance) or do we need to abandon database links for this table?
Thanks in advance for your input.

So, here's my simple test.
SQL>
SQL> create table gurnish.indexes20plus ( n1 number, n2 number, n3 number, n4 number, n5 number, n6 number, n7 number,
2 n8 number, n9 number, n10 number, n11 number, n12 number, n13 number, n14 number, n15 number, n16 number,
3 n17 number, n18 number, n19 number, n20 number, n21 number, n22 number, n23 number, n24 number,
4 n25 number, n26 number, n28 number);
create index xin1 on indexes20plus (n1);
Table created.
SQL> SQL> create index xin2 on indexes20plus (n2);
create index xin3 on indexes20plus (n3);
Index created.
SQL> SQL>
Index created.
SQL> SQL> create index xin4 on indexes20plus (n4);
Index created.
SQL> SQL>
Index created.
SQL> SQL> create index xin5 on indexes20plus (n5);
create index xin6 on indexes20plus (n6);
Index created.
SQL> SQL>
Index created.
SQL> SQL> create index xin7 on indexes20plus (n7);
Index created.
SQL> SQL> create index xin8 on indexes20plus (n8);
Index created.
SQL> SQL> create index xin9 on indexes20plus (n9);
Index created.
SQL>
SQL> create index xin10 on indexes20plus (n10);
Index created.
SQL> SQL> create index xin11 on indexes20plus (n11);
create index xin12 on indexes20plus (n12);
create index xin13 on indexes20plus (n13);
Index created.
SQL> SQL>
Index created.
SQL> SQL>
Index created.
SQL> SQL> create index xin14 on indexes20plus (n14);
Index created.
SQL> SQL> create index xin15 on indexes20plus (n15);
Index created.
SQL>
SQL> create index xin16 on indexes20plus (n16);
Index created.
SQL>
SQL> create index xin17 on indexes20plus (n17);
Index created.
SQL> SQL> create index xin18 on indexes20plus (n18);
Index created.
SQL> SQL> create index xin19 on indexes20plus (n19);
Index created.
SQL> SQL> create index xin20 on indexes20plus (n20);
Index created.
SQL> SQL> create index xin21 on indexes20plus (n21);
Index created.
declare
i number;
begin
for i in 1..100
loop
dbms_random.seed(i+100);
insert into indexes20plus values (dbms_random.value(1,5),dbms_random.value(1,21),dbms_random.RANDOM, dbms_random.RANDOM,dbms_random.value(1,20),
dbms_random.value(1,4),dbms_random.value(1,6), dbms_random.value(1,7),dbms_random.value(1,9),dbms_random.value(1,10),
dbms_random.value(1,11),dbms_random.value(1,12),dbms_random.value(1,13),dbms_random.value(1,14),dbms_random.value(1,1),
dbms_random.value(1,1),dbms_random.value(1,19),dbms_random.value(1,122),dbms_random.value(1,20),dbms_random.value(1,20)
,dbms_random.value(4,20),dbms_random.value(1,20),dbms_random.value(1,20),dbms_random.value(1,20),dbms_random.value(1,20)
,dbms_random.value(4,20),dbms_random.value(4,20));
end loop;
commit;
end;
SQL> set autotrace traceonly
SQL> l
1* select * from gurnish.indexes20plus@lvoprds where n1 = 4
SQL> /
no rows selected
Execution Plan
Plan hash value: 441368878
| Id | Operation | Name | Rows | Bytes | Cost (%CPU
)| Time | Inst |
| 0 | SELECT STATEMENT REMOTE | | 1 | 351 | 1 (0
)| 00:00:01 | |
| 1 | TABLE ACCESS BY INDEX ROWID| INDEXES20PLUS | 1 | 351 | 1 (0
)| 00:00:01 | LVPRD |
|* 2 | INDEX RANGE SCAN | XIN1 | 1 | | 1 (0
)| 00:00:01 | LVPRD |
Predicate Information (identified by operation id):
2 - access("A1"."N1"=4)
Note
- fully remote statement
- dynamic sampling used for this statement
Statistics
0 recursive calls
0 db block gets
0 consistent gets
0 physical reads
0 redo size
1897 bytes sent via SQL*Net to client
481 bytes received via SQL*Net from client
1 SQL*Net roundtrips to/from client
0 sorts (memory)
0 sorts (disk)
0 rows processed
SQL> select * from gurnish.indexes20plus@lvoprds where n21 = 4;
no rows selected
Execution Plan
Plan hash value: 2929530649
| Id | Operation | Name | Rows | Bytes | Cost (%CPU
)| Time | Inst |
| 0 | SELECT STATEMENT REMOTE | | 1 | 351 | 1 (0
)| 00:00:01 | |
| 1 | TABLE ACCESS BY INDEX ROWID| INDEXES20PLUS | 1 | 351 | 1 (0
)| 00:00:01 | LVPRD |
|* 2 | INDEX RANGE SCAN | XIN21 | 1 | | 1 (0
)| 00:00:01 | LVPRD |
Predicate Information (identified by operation id):
2 - access("A1"."N21"=4)
Note
- fully remote statement
- dynamic sampling used for this statement
Statistics
1 recursive calls
0 db block gets
0 consistent gets
0 physical reads
0 redo size
1897 bytes sent via SQL*Net to client
481 bytes received via SQL*Net from client
1 SQL*Net roundtrips to/from client
0 sorts (memory)
0 sorts (disk)
0 rows processed
SQL>

HELP! FOR LOOP TO SCROLL THROUGH TABLE AND CREATE DATABASE LINK

Hi,
Here's the scenario, not much of a PL programmer, just basic SQL so really need some help people!
I have 2 tables. 1 contains list of DB's and the other contains rules to follow.
I need to create a loop that goes through the table containing the DB's and on each row a DB link is created (Only 1 link allowed!)
Once created, the schema currently logged in with also has an account on the linked DB in order to run scripts- The scripts are stored centrally hence the requirement for the link to the target DB.
There are numerous scripts that need to be executed and can all be called from 1 script, once executed the loop exists and the database link needs to be dropped.
Once dropped, the first loop continues, creating a DB link for the next DB listed in the table (and all the scripts are fired again)
This continues against all the DB's listed in the table.

Hi BlueShadow,
Thanks again for the response, you've hit the nail on the head. SQL scripts on a unix server, a loop goes through a table 1 at a time. Each row gets a link created and then all the scripts stored on the server are executed against the db linked to. So I'm assuming this is a loop within a loop.
1 loop to go through the table to create the link and then another loop within once connected to execute all the scripts against the connected DB. Once the scripts are run, the loop exits and moves onto the next server and so on until all the servers have the scripts are run.
It's PL/SQL scripts we're after and not shell scripts as this would free us from the OS constraints.
We have to drop the links due to security. Any idea on o

Database link error when compiling forms 6.0 and forms 6i.

Dear sirs,
We have a database link between two databases of the same version oracle 8.0.5.
Recently we have upgraded one of our databases to version 9.2.0.1 (the database where the database link was originally created ) and now we are having problems when compiling forms that have PL/SQL blocks using the database link.
The error message received when compiling the form is the following:
ORA-02068: Following severe error from dbproduc.world
ORA-00600: Internal error code, arguments: [No conversion op],[],[],[],[],[],[],[]
The forms did not present this error before, it began when we made the upgrade.
Is this a FORMS 6.0 problem ?
Is this an ORACLE 8.0.5 problem ?
Is this an ORACLE 9.2.0.1 problem ?
Can you please give me some advice to solve this problem ?
Thanks in advance

As I see, when you use a non-oracle database the tables don`t appear, you must create the realation with the table manually, on the properties

Custom report listing database links

I'm trying to determine what tables/views in the EM12c repository contain database link information (if any), so I can create a custom report using it. Has anyone come across an EM schema description or know how to determine what objects/queries are behind a page in EM? If the data isn't centralized in the EM schema, I recognize I could create a Group and run a query against DB_DB_LINKS to generate a link report for all the databases. Is that a better way to do it? I'm open to additional suggestions or tips, since I'm new to the custom reporting features ... (and not trying to reinvent the wheel here). Thanks.

There is no table in em repository database that contains db link information for database targets. The way to get this info is create a dblink in your em repository database for each database target then create plsql package that connect to each target over dblink and writes the info into a table in em repository table. You could also just create a sql job from em and run against each database target.
If you need help with the plsql let me know I have several of these in my em to extract specific data I need from each db target.

Execute procedure over database link

Hi,
I''m working on a package where you can select the required database, paste some query and with clicking on a button it will execute and create an explain plan for this query.
Therefore i've create a procedure on each database that put's the explain plan in the PLAN_TABLE.
To do this i need to execute this prodecure from the package. I use the following code:
DBA_OWNER.DB_PCD_EXPLAIN_PLAN@DBA_LINK_533.WORLD(p_query);
This is working fine as this database link allready exists to the required database. But i want to make the database link name variable. I've allready created the dynamic database link:
l_link varchar2(20) := 'DBA_LINK';
l_link_nr number(4) := dbms_random.value(0,1000);
l_db varchar2(20) := l_link||'_'||l_link_nr;
l_statement varchar2(4000);
begin
l_statement := 'create database link '||l_db||' connect to **** identified by ***** using '''||p_database||'.WORLD''';
execute immediate l_statement ;
So now i have the dynamic databaselink that is created each time i call the package.
now i want to use this databaselink to call the procedure. this is where it goes wrong.
The code i'm using:
DBA_OWNER.DB_PCD_EXPLAIN_PLAN@l_db(p_query);
is not acceoted when i build the package.
The follwoing error message is showed.
PACKAGE BODY DBA_OWNER.PCK_EXPLAIN_PLAN
On line: 66
PLS-00352: Unable to access another database 'L_DB'
Does someone know how to use this variable to execute the procedure on the remote db?

Any procedures you call have to be accessible at compile time, so the database link must also exist at compile time.
You can get around this by putting your procedure call to DB_PCD_EXPLAIN_PLAN inside dynamic SQL, the same as you are doing to create the database link. Dynamic SQL is not checked until runtime.
Think about the risk if this procedure is exploited. You are creating a way for someone to run arbitrary code in an any database in your environment, with presumably a highly-privileged ID, if it can run an explain plan against any schema in any target database.
This is exposing some significant security issues. Read up on SQL injection, and have someone else review the code for security issues before deploying this.

Interactive report performance problem over database link - Oracle Gateway

Hello all;
This is regarding a thread Interactive report performance problem over database link that was posted by Samo.
The issue that I am facing is when I use Oracle function like (apex_item.check_box) the query slow down by 45 seconds.
query like this: (due to sensitivity issue, I can not disclose real table name)
SELECT apex_item.checkbox(1,b.col3)
, a.col1
, a.col2
FROM table_one a
, table_two b
WHERE a.col3 = 12345
AND a.col4 = 100
AND b.col5 = a.col5
table_one and table_two are remote tables (non-oracle) which are connected using Oracle Gateway.
Now if I run above queries without apex_item.checkbox function the query return or response is less than a second but if I have apex_item.checkbox then the query run more than 30 seconds. I have resolved the issues by creating a collection but it’s not a good practice.
I would like to get ideas from people how to resolve or speed-up the query?
Any idea how to use sub-factoring for the above scenario? Or others method (creating view or materialized view are not an option).
Thank you.
Shaun S.

Hi Shaun
Okay, I have a million questions (could you tell me if both tables are from the same remote source, it looks like they're possibly not?), but let's just try some things first.
By now you should understand the idea of what I termed 'sub-factoring' in a previous post. This is to do with using the WITH blah AS (SELECT... syntax. Now in most circumstances this 'materialises' the results of the inner select statement. This means that we 'get' the results then do something with them afterwards. It's a handy trick when dealing with remote sites as sometimes you want the remote database to do the work. The reason that I ask you to use the MATERIALIZE hint for testing is just to force this, in 99.99% of cases this can be removed later. Using the WITH statement is also handled differently to inline view like SELECT * FROM (SELECT... but the same result can be mimicked with a NO_MERGE hint.
Looking at your case I would be interested to see what the explain plan and results would be for something like the following two statements (sorry - you're going have to check them, it's late!)
WITH a AS
(SELECT /*+ MATERIALIZE */ *
FROM table_one),
b AS
(SELECT /*+ MATERIALIZE */ *
FROM table_two),
sourceqry AS
(SELECT b.col3 x
       , a.col1 y
       , a.col2 z
FROM table_one a
    , table_two b
WHERE a.col3 = 12345
AND   a.col4 = 100
AND   b.col5 = a.col5)
SELECT apex_item.checkbox(1,x), y , z
FROM sourceqry
WITH a AS
(SELECT /*+ MATERIALIZE */ *
FROM table_one),
b AS
(SELECT /*+ MATERIALIZE */ *
FROM table_two)
SELECT apex_item.checkbox(1,x), y , z
FROM table_one a
    , table_two b
WHERE a.col3 = 12345
AND   a.col4 = 100
AND   b.col5 = a.col5If the remote tables are at the same site, then you should have the same results. If they aren't you should get the same results but different to the original query.
We aren't being told the real cardinality of the inners select here so the explain plan is distorted (this is normal for queries on remote and especially non-oracle sites). This hinders tuning normally but I don't think this is your problem at all. How many distinct values do you normally get of the column aliased 'x' and how many rows are normally returned in total? Also how are you testing response times, in APEX, SQL Developer, Toad SQLplus etc?
Sorry for all the questions but it helps to answer the question, if I can.
Cheers
Ben
http://www.munkyben.wordpress.com
Don't forget to mark replies helpful or correct ;)

PL/SQL :ORA-04052 with Database link

i have created a database link in my producation database as following
CREATE PUBLIC DATABASE LINK <NAME>
CONNECT TO <USER>
IDENTIFIED BY <P/W>
USING <CONNECT STRING OF TARGET DATABASE
oracle version 9.0.2.8
OS : Windows 2003 EE R2 SP2
Using oracle failsafe 3.3.4 with windows cluster
Problem Description :
whenever i run my pl/sql procecdure to pull the data from the target database i get the following error
ERROR at line 3
ORA-06550:line 3 column 2
PL/SQL : ORA-04052: error occured when looking up remote object _<SCHEMA>.<TABLE>@<DATABASE LINKE NAME>_
ORA-00604 : ERROR occured at recursive SQL level 1
ORA-03106 : fatal tow-task communication protocol error
ORA-02063: preceding line from <DATABASE LINK NAME>
I have tested the same way in the test environment the same oracle version as well the OS but without oracle failsafe and windows cluster
the script goes smoothly with out any errors.
i have google and checked the OTN for all available solutions but still nothing its not getting throw
i will be very thankful for your replys and solutions
any farther clarification i am ready
thanks in advance

Hi,
This forum is for issues connecting to non-Oracle databases. As the problem is using PL/SQL to connect to another Oracle database then it would be better to post a thread in the PL/SQL forum -
PL/SQL
If you are trying to connect to a non-Oracle database then please give us the details of which non-Oracle database and the software you are trying to use to connect.
Regards,
Mike

Report over database link error

Good morning all.
I have a database link LINKA from USERA on LOCALSERVER to USERB on REMOTESERVER.
(create database link LINKA connect to USERB identified by mypassword using validtns)
In USERC on REMOTESERVER I have a TABLEX, with grant all on TABLEX to USERB on REMOTESERVER.
In USERB on REMOTESERVER I have a view TABLEXV, select * from USERC.TABLEX
From USERA on LOCALSERVER I can select * from TABLEXV@LINKA. In fact I can insert/update/delete tablexv from USERA.
I also have a view TABLEXV on USERA, select * from TABLEXV@LINKA. I can also select/insert/update/delete from USERA.TABLEXV.
So far so good - all working as expected.
Then, my APEX app on LOCALSERVER, interactive report, parsing schema USERA, querying TABLEXV, I get the following:
when "Exclude Link Column", I get the error "The requested URL /pls/apex/f was not found on server.
when "Link to Single Row View", report displays correctly.
when "Link to Custom Target", I get the error "The requested URL /pls/apex/f was not found on server.
When I run the select * from TABLEXV as a regular report (i.e. not interactive), I also get the error.
So the only time I get the report displayed correctly is using IR and "Link to Single Row View".
However, clicking on the link (for Single Row View) I get "The requested URL /pls/apex/wwv_flow.show was not found on this server.".
To summarize:
- accessing table via view over database link
- works outside of apex without issue
- inside only works when Link to Single Row View set
- But clicking on link fails
I could live with just having the Link to Singe Row View option if I could disable displaying of the icon so that the user cant click on it.
APEX 3.2.00.27
EE Database - 10.2.0.3 (yes I know out of support)
Remote EE Database - 10.2.0.5
Real object names replaced to protect the innocent!
Anyone got any clues?
I have used remote tables many times in my APEX applications and never had this issue.
Thanks,
Rob @ very confused .com

Good morning all.
I have a database link LINKA from USERA on LOCALSERVER to USERB on REMOTESERVER.
(create database link LINKA connect to USERB identified by mypassword using validtns)
In USERC on REMOTESERVER I have a TABLEX, with grant all on TABLEX to USERB on REMOTESERVER.
In USERB on REMOTESERVER I have a view TABLEXV, select * from USERC.TABLEX
From USERA on LOCALSERVER I can select * from TABLEXV@LINKA. In fact I can insert/update/delete tablexv from USERA.
I also have a view TABLEXV on USERA, select * from TABLEXV@LINKA. I can also select/insert/update/delete from USERA.TABLEXV.
So far so good - all working as expected.
Then, my APEX app on LOCALSERVER, interactive report, parsing schema USERA, querying TABLEXV, I get the following:
when "Exclude Link Column", I get the error "The requested URL /pls/apex/f was not found on server.
when "Link to Single Row View", report displays correctly.
when "Link to Custom Target", I get the error "The requested URL /pls/apex/f was not found on server.
When I run the select * from TABLEXV as a regular report (i.e. not interactive), I also get the error.
So the only time I get the report displayed correctly is using IR and "Link to Single Row View".
However, clicking on the link (for Single Row View) I get "The requested URL /pls/apex/wwv_flow.show was not found on this server.".
To summarize:
- accessing table via view over database link
- works outside of apex without issue
- inside only works when Link to Single Row View set
- But clicking on link fails
I could live with just having the Link to Singe Row View option if I could disable displaying of the icon so that the user cant click on it.
APEX 3.2.00.27
EE Database - 10.2.0.3 (yes I know out of support)
Remote EE Database - 10.2.0.5
Real object names replaced to protect the innocent!
Anyone got any clues?
I have used remote tables many times in my APEX applications and never had this issue.
Thanks,
Rob @ very confused .com

How can you SELECT via Database Link CLOB data using Application Express?

Customer Issue:
Developer using Oracle's Application Express 3.1. The Developer is trying to SELECT a CLOB datatype column from a remote (10.2.0.3) database, via a database link on her 10.2.0.4 based client Application. The Developer wants to be able to select CLOB data from the remote database which has limitation that she can't make any changes to the remote database.
Developer's Comments:
I do a select and get the error. Getting error ORA-22992: cannot use LOB locators selected from remote tables. So she feels she can't use dbms_lob.substr in this configuration I can do a "select into" but that is for one value. I am trying to run a select statement for a report that brings back more than one row. I do not have permission to change anything on the remote database. I want to access the remote database and multiple tables.
This is not something I work with, would greatly appreciate help or ideas. Is this a limitation of the 3.1; or does she just not have this set up correctly; or should she be using a Collection (if yes, please share example)
Thanks very much,
Pam
Edited by: pmoutrie on Jun 4, 2009 12:01 PM
Hello???
Would really appreciate an answer.
Thanks,
Pam

This may not be a perfect solution for you but it worked for my situation.
I wanted to grab some data from Grid Control's MGMT$JOB_STEP_HISTORY table but I couldnt' create an Interactive Report due to the existance of a CLOB column. I cheated this by creating a view on the GC DB, grabbing the first 4000 characters and turning it into a varchar2 column:
create view test_job_step_history as
select job_Name, target_name, status, start_time, end_time, to_char(substr(output,1,4000)) output
from MGMT$JOB_STEP_HISTORY where trunc(end_time) > trunc(sysdate)-90
In an APEX Interactive Report:
select * from test_job_step_history@GCDB
Granted, the output looks aweful right now but I am only looking for a very particular output (failed, denied, ORA-, RMAN-, etc) so the formatting isn't the most important thing to me right now.
If anyone can improve -- and I'm sure you can -- on this I'd love to hear about it.
Thanks,
Rich

How can i get data from another database SQL Server use database link from

I have a database link from Oracle connect to SQL Server database with user cdit connect default database NorthWind.How can I get data from another database(this database in this SQL Server use this database link)?

hi,
u should see following documentation:
Oracle9i Heterogeneous Connectivity Administrator's Guide
Release 1 (9.0.1)
Part Number A88789_01
in it u just go to chapter no. 4 (using the gateway),,u'll find ur answer there.
regards
umar

Not able to create a database link using the database gateway of oracle 11g

HI,
While trying to create a database link to SQL server from Oracle ,using the database gateway provided with 11g, i am getting the following error while making use of it in selecting columns from tables :
Error starting at line 1 in command:
select * from test1@dblink
Error at Command Line:1 Column:20
Error report:
SQL Error: ORA-28513: internal error in heterogeneous remote agent
ORA-02063: preceding line from DBLINK
These are the steps i have followed for setting up:
1.Ran the set up for the Database gateway.and mentioned the SQL server name and database .ALos set up a listener.
2. Added the following in the Listener.ora of Oraclehome 11/NETWORK/ADMIN:
LISTENER_SQL_FCD =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST =localhost) (PORT = 1541)
SID_LIST_LISTENER_SQL_FCD =
(SID_LIST =
(SID_DESC =
(SID_NAME=dg4msql)
(ORACLE_HOME= D:\app\20537\product\11.1.0\db_3)
(PROGRAM=dg4msql)
3.Added the following in tnsnames.ora inOracle home/NETWORK/ADMIN:
dg4msql=
(DESCRIPTION=
(ADDRESS=(PROTOCOL=tcp)(HOST=localhost)(PORT=1541))
(CONNECT_DATA=(SID=dg4msql))
(HS=OK)
4. Following is the entry in initdg4msql.ora in C:\product\11.1.0\tg_5\dg4msql\admin:
HS_FDS_CONNECT_INFO=10.148.45.242:1433//SalesDemo
HS_FDS_TRACE_LEVEL=DEBUG
HS_FDS_RECOVERY_ACCOUNT=RECOVER
HS_FDS_RECOVERY_PWD=RECOVER
5. Created the database link :
create database link dblink
connect to "sa" identified by "<pswd>"
using 'dg4msql'
On running :select * from test1@dblink i get the following error:
Error starting at line 1 in command:
select * from test1@dblink
Error at Command Line:1 Column:20
Error report:
SQL Error: ORA-28513: internal error in heterogeneous remote agent
ORA-02063: preceding line from DBLINK
Is there any issue with the set or definition that I get the above error?

What is the version of the Oracle database in which you have specified/and use the database link?
If it is for example 10.2.0.3.0 you need to apply the mandatory patch for RDBMS bug 5965763 first before being able to use an 11g gateway. Have a look at MetaLink note 457808.1 for details about this patch.
Regards,
Ed

8i Database link

Similar Messages

Maybe you are looking for