9.0.3.3 - Synchronize does not remove colum

Using JDEV 9.0.3.3. A database foreign key colum (oracle 9i DB) was removed. I tried to use the synchronize option on the package but it didn't drop the column (wasn't an option).
So I started trying to remove it by hand. First I deleted the view links and associations based on the FK link. Then I removed the column from the view objects. Then I tried to remove the column from the entity and JDeveloper crashes. I restarted and tried again to the same result.
1. Should the synchronize function have picked up on this change?
2. Is the CTD (Crash to Desktop) documented? Is it fixed in 9.0.4 or 9.0.5.1?
Thanks for your time!

The bug is documented and there is a patch available in metalink. Chances are therefore good that this bug is fixed in 9.0.4 production and 10g.
Sascha

Similar Messages

  • When synchronization does not remove deleted programs

    Sorry, translating from Russian by Google.
    I have a problem appeared. before that it was Itunes 10 + iphone, it was no problem. When you remove programs from your computer when you sync itunes asked what to do with this program for iPhone. Switched to Mac, itunes 11, the entire base endured logged in, check in the program is the "Automatically ...", New programs downloaded, but if I remove the poppy program, after synchronization, it stays on the iPhone. What to do? This is very inconvenient.

    Please run "Remove-SCOMDisabledClassInstance” from the Operations Manager PowerShell
    console.
    You might get some errors after running this. Errors are about the ObjectIDs and RuleIDs, but you can ignore those errors and should keep running this command until it completes successfully.
    After completing successfully, the deleted objects will be removed the discovery and SCOM.
    Hope this helps.
    Thanks, S K Agrawal

  • I can not sync my iPhone to the computer. I keep getting up an error message that synchronization does not want to start. I have uninstalled iTunes and then reinstall it. But the same warning box will appear. How can I get my phone in sync again?

    Can someone please help me get my iPhone to sync to your computer?
    I can not sync my iPhone to the computer. I keep getting up an error message that synchronization does not want to start. I have uninstalled iTunes and then reinstall it. But the same warning box will appear. How can I get my phone in sync again?

    Hello lenmin,
    Thanks for using Apple Support Communities.
    To help resolve this issue where you're repeatedly prompted to authorize with your Apple ID in iTunes when syncing, please follow the directions in the article below.
    iTunes: Missing folder or incorrect permissions may prevent authorization - Apple Support
    Have a great weekend,
    Alex H.

  • Synchronization does not appear in my iTunes program on your computer when I sit cable.

    synchronization does not appear in my iTunes program on my computer when I sit cable. Itunes is the latest version and my iphone is updated to IOS6 - please help?

    You have to download them by going to the iTunes store - purchased (under quick links)

  • Synchronization does not stops

    Hi all
    After installing MI, MAM etc, during the Synchronization for the data (5000 measurement points), the data comes but the Synchronization does not stops or takes a very long time to stop. Confirmed about the data by tracking the memory and also by restartign the device once the memory is stable, the data exists.
    Similarly while creating measurement documents for 150 docuemtns syn works fine, but for 300 documents the data gets successfully posted but the sync does not stops unitl we manually restart the device.
    We use Symbol 9090 and program memory available is 2 to 3 MB.
    Is it a memory issue??  Did any one had come accross this problem??
    Thanks
    Raj

    Hi Raj
      Surprised that these recomendations doesnt work. Anyway i have one more recomendation which is related to TIME AGENT. If you are using any of the Agent feature, which is made available recently in MI then this could also result in an endless sync. The Time agent which is one of the several Agents, can never have a value TRUE for the History parameter. As for the possible solution,  please change the value of AGENT_HISTORY in the TIME_AGENT parameter set to FALSE and then assign this parameter set to a device configuration which inturn in assigned to a device.  Please test this new scenario with a fresh client installation and not with an already synced client. This should solve this endless problem.
    Or other way of testing this is In the client there is a file named <b><i>agents.properties</i></b> in the MI settings folder. Here there would an entry called TRACE_AGENT#AGENT_HISTORY=TRUE. Please set his value to FALSE. Let me know if this works.
    Best Regards
    Sivakumar

  • Hp C310 e all in one. Print that is stuck in the print queue, cancel does not remove

    hp C310 e all in one. I have a print that is stuck in the print queue, cancel does not remove says deleting. I have tried shutting down printer, closing word doc, multiple canel all prints. Any Ideas

    Hello mackice,
    Try these steps below to clear the print queue. The steps are listed for Vista and Windows 7 and would be slightly different for XP. If you are using a Mac then the steps below would not work. Please advise what OS you are using.
    Option 1)
    1. Click on start orb
    2. Type in search window: "services.msc" (without the quotes)
    3. click ok
    4. Scroll down to Printer spooler service and click on it in the right side window.
    5. On the left side click stop the service and wait forthe process to stop
    (Do not close the window yet. You will have to restart it here later.)
    6. next delete the print job in the printer queue
    7. then restart the spooler service
    8. Resubmit your new print job.
    Option 2)
    If that doesn't clear it, the next step would be to stop the spooler
    service as stated above
    Go into windows explorer
    (Print job data is collected and stored in a spool file in the spooler
    folder.)
    It is located in:
    C:\WINDOWS\system32\spool\PRINTERS
    Your print job will show 2 files there Example below:
    00002.SHD
    00002.SPL
    Delete the files located in there. There may be several of them
    depending apon how many print jobs you submitted. You will have to
    resubmit your print jobs all over again.
    Next go back to services window and restart the spooler service
    If I have helped you in any way click the Kudos button to say Thanks.
    The community works together, click Accept as Solution on the post that solves your issue for other members of the community to benefit from the solution.
    - Friendship is magical.

  • I received an iCloud backup notification on my ipad mini but tapping "OK" does not remove it and therefore I am unable to do any activity on my ipad mini. please help urgent.

    I received an iCloud backup notification on my ipad mini but tapping "OK" does not remove it and therefore I am unable to do any activity on my ipad mini. please help urgent.??

    Have you tried a reset ? Press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider if it appears), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

  • How to remove history in the location bar? Deleting history and then using "History" only in the settings for the location bar does not remove old history.

    I want to remove ''old History'' in the Location bar.
    I am using Firefox 3.6.13.
    "Clear recent history" does not remove the old History in the Location bar. And changing the setting to only show "History" does also not remove the old history.
    Pressing "Delete" on single lines when opening the list by clicking the arrow to the right in the location bar, remove the entries temporary. But next time you type in the location bar, the same suggestions are there.

    See:
    * [[Clearing Location bar history]]
    * [[Cannot clear Location bar history]]
    Entries in the location bar drop down list with a yellow (blue on Mac) star at the right end are bookmarks.<br />
    You can remove such a bookmarked item that shows in the list if you open that url in a tab and click the yellow star in the location bar.<br />
    This will open the "Edit This Bookmark" dialog and you can click the Remove button to remove the bookmark if you want to remove such a bookmarked entry.

  • Rule containing "Mark as Read" and "Move to Folder" does not remove New Mail Notification

    I asked this question in another forum here (sorry for not linking, but the forum would not let me because my account is not yet verified):
    http://answers.microsoft.com/en-us/office/forum/office_2013_release-outlook/rule-containing-mark-as-read-and-move-to-folder/061a8009-dd98-4304-81b0-6c4c8a5a6205
    They passed the buck to this forum.  Can anyone help?  Here is my original post:
    I have set up a rule so that emails from a certain sender should be marked as 'read' and routed to a certain folder.  The rule works just fine except for the fact that it does not remove the new mail notification from the taskbar icon
    or the system tray.  The rule reads as follows:
    Apply this rule after the message arrives
    with New Home Sale in the subject
    move it to the _New Home Sales folder
      and mark it read
    Once I open the _New Home Sales folder, all messages are marked as read, as they should be.  When I open any of the emails in this folder, the notification goes away.  It does not even have to be the most recent email or the same folder
    - opening any email from any folder clears the notification, even if the same email was used to clear it before.  Previewing does not remove the notification.  
    I have a similar rule set up for another folder:
    Apply this rule after the message arrives
    with New Home Final Sale in the subject
    move it to the _New Home Final Sales folder
      and mark it as read
    The same thing happens here with the unread notification.
    This is very annoying, as I want to receive these emails but I do not need to know every time one comes in.
    Does anyone have any advice on this?  I have read a few threads about an unread email bug, but I'm hoping I'm just missing a setting somewhere. I find it hard to believe such a bug would persist this long.

    Hi,
    From your description, I would like to verify the Exchange version and Outlook version at first. Since I have a test in my environment using Exchange 2010 with Outlook 2010. I create a same inbox rule, it works and there is no new mail notification from
    the taskbar.
    What's more, I recommend you use Outlook safe mode to determine whether the problem is caused by add-ins.
    If the issue persists, please install the Outlook latest Service Packs and check the result.
    Hope it helps.
    Best regards,
    Amy Wang
    TechNet Community Support

  • Uninstaller utility does not remove the installation from the registry

    In our environment, we publish a script in Group Policy so that both the ActiveX and Plugin installs for flash player are easily installed for staff that have limited user access on their computers.  I usually remove or replace the old MSI files from the path the above script installs from when I get new versions of Flash Player.  For a while, I've run into a problem where when the new MSI files are installed, they try to uninstall the existing installation and fail because the old MSI file is no longer at the original installation source path.  I've tried to remedy this by having the script use the uninstall_flash_player utility to manually remove the activex and plugin first, but this utility does not remove the installation details of each from the registry, and the subsequent installations of the MSI files fail.  I have to uninstall the existing flash player installations first or perform a registry hack to formally remove the installation from Windows, and then the new installation will succeed.
    Does anybody have any advice for making this process work better?  Would this be considered a bug with the uninstaller tool?

    Hi, Until someone can reply to your thread/question, you may want to see this thread.
    http://forums.adobe.com/thread/826773?tstart=0
    eidnolb

  • Why can't i empty my trash bin? it prompts me to dele ''all locked items'' or ''unlocked items''...when i click delete ''all''...it runs up to a total of approx 29000 items, yet it does not remove it securely or at all!

    why can't i empty my trash bin? it prompts me to dele ''all locked items'' or ''unlocked items''...when i click delete ''all''...it runs up to a total of approx 29000 items, yet it does not remove it securely or at all! I am running OS X YOSEMITE

    Trash – Empty When File is Locked or in Use
    Try holding down the option button while trying to delete the Trash. If that doesn’t work, here is some more information.
    Trash FAQ          
    Trash Permission Error
    Trash Permission Error (2)
    Trash Permission Error (3)

  • The spot remover tool does not remove the selected item

    When I use spot remover and click on the item I want to remove it hightlights it but does not remove the item

    Is your Opacity set to 100%?
    If you press the "H" key does it show where it is getting the replacement from?

  • Updating F_BKPF_KOA does not remove SOD Issues

    Hi,
    We have recently installed GRC 5.3 and are currently working through SOD issues located in some roles, however we have found that trying to restrict a Function in the Rule Set does not remove the SOD Issue:
    Example:
    We have created and AP Processing Role and based upon the Standard Rule Set FB02 is causing an SOD issue with itself.
    Functions AP02 and GL01 are being called, I have enabled F_BKPF_KOA, ACTVT 01,02 and KOART S in the GL01 function (authorisation for KOART - S not present on the AP Processing Role), this has been saved and the Rules updated, yet the issue persists.
    Any advice???
    Thanks
    Craig

    Craig,
    i got it.
    things are working perfectly as designed.
    now let me explain how RAR do analysis.
    it will pull Role Data and Rules data (enabled one only) and then do comparison one by one.
    first it will check for relevant tcode (we are doing persmission level analysis)
    then it will compare all objects in role with object in that rule (in your case it is 02907N01)
    then field values will be compared
    IF FIELD VALUES IN RULES EXIST IN ROLE ALSO, THEN IT IS CONFLICT
    hope you get my point.
    now in your case.... you are trying that if you disable ACTVT 03 , the conflict should not show.
    sorry you are going wrong way...
    now your rules say if any user have ACTVT 01 OR 02, then it should show conflict.
    and yes ROLES do satisfy that.
    remove 02 and 01 from role only then it will not show conflict.
    tried my best to explain
    please let me know ........
    regards,
    Surpreet

  • La fin de synchronization ne s'arrête pas. The end of synchronization does not stop.

    La fin de synchronization ne s'arrête pas ni pour iPhone5 ni pour iPad2. Je sui obligé d'éjecter avant la fin qui ne vient pas. The end of synchronization does not stop nor for iPhone5 neither for iPad2. I am obliged to eject before end that does not come.

    my computer hp dv7 6c72ef
    the configuration : Caractéristiques de l'ordinateur portable HP Pavilion dv7-6c72ef pour les loisirs | Support HP®

  • "netcfg2 -a" does not remove "/var/run/daemons/net-profiles"

    hello!
    i have found out, that a "netcgf2 -a" does not remove /var/run/daemons/net-profiles. after that i have to stop the net-profiles daemon by hand. i connect to networks with "netcfg2 <profile>", the net-profiles daemon will be started automatically by that command.
    is this an issue?
    another problem i have is, that netcfg2 even cannot connect to a network automatically, if i have two networks with the same beginning:
    for example: network a: foo; network b: foobar - when i want to connect to "foo" it uses the "foobar" profile, because the name of the profile file is listed before the name of the file from network a.
    bye iggy

    The first thing: I thing netcfg2 should not touch anything in /var/run/daemons, since that's the job of scripts in /etc/rc.d/* It's the same for any daemon you run - if you kill it manually, not using /etc/rc.d/<whatever> stop, then you have to clean up /var/run/daemons/<whatever> yourself as well.
    before connecting with netcfg2 there is no "net-profiles" in /var/run/daemons. after netcfg2 <profile> it is. after "netcfg2 -a" the file is still there, so it indicates net-profiles-daemon is still running.
    Last edited by iggy (2008-05-06 13:52:28)

Maybe you are looking for