955 won't run memory in 1333mhz

Specs all just bought:
Corsair 650w psu
MSI 790FX-GD70 (latest BIOS 1.7)
AMD Phenom-II 955
OCZ Platinum 1333mhz 2*2gb
My problem: Right now when I use "load optimized defaults" in bios I get a 200FSB*16 which equals a 3,2ghz processor and 1066(!)mhz ram.
Is this how it should be? I could either raise the FSB to get the ram at 1333mhz, but that have made my system unstable. I've also tried to change the cpu/memory-ratio to 1.3.3 which sets the ram at 1333mhz but that also makes them unstable and I don't even think that will give a performance increase right? The RAM should be able to follow the CPU by auto.
Only thing I've done now is to set the Ram voltage to 1.65 instead of the auto value of 1.60 but I'd really like to have them running in 1333mhz, what should I do or what could be wrong?
Simon

Quote from: Bas on 19-January-10, 19:38:47
Mind your language!!
It happens a lot, however I can not find that memory at OCZ, looks to me you got an Intel kit rather then the AMD version.
Run CPU-z, look at the exact details, the BIOS doesn't give enough info.
As the AMD version has the letters AM near the end, yours do not.
http://www.ocztechnology.com/search/?q=ocz3p1333lv&x=47&y=5
But I actually took time to censor my own language! :D
Anyways, seems to me I've got the intel-ram and not the AMD-ram. And that could be why I have to clock it to make it work in 1333mhz? I guess ill settle with running them stable in: Dual channel, 1T, 7-7-7-20, at 1.65V and 1066mhz. It's not that big of a difference anyways.
Thank you for the help again Bas.

Similar Messages

CS3 installs but won't run

Ok - not sure if this goes in this section or not.. but it's a technical question.
My b/f bought me a Dell Laptop last week. It has the recommended minimum of everything adobe says it needs for photoshop CS3 (see below for 1721 specs)
When I installed it on the laptop - it was slow, but said it installed. But when I go to open up Photoshop, it opens the screen - and then just hangs. After about 5 minutes it says not responding and I close it. Any of the other programs that came with won't even get that far. I click on them and it gives the little "thinking" circle (as I call it.. lol) and then nothing.
I have read that CS3 has issues with Vista - but their site says the home premium should work. I've also read about 64 bit issues.. but the OS is 32 bit - so it's capable of running 32bit systems... I guess.
I called adobe yesterday after installing and reinstalling CS3 15+ times... with the same issue. I was on the phone for about 2 hours with them. Basically - they have NO CLUE what it would be since it installs fine and opens with no error messages. I checked the log files and there is nothing in there I see that says any kind of error.
I have disable windows defender, uninstalled McAfee and google desktop (all are known to cause issues with CS3), I have ALL non MS startup services turned off.. I have turned off the MS users control.. all suggested by the adobe tech.
I have installed using the run as administrator. Nothing. Created a new admin account and installed on that user and opened on reg admin account. Nothing. (again typical things that correct cs3 install issues)
The last thing the guy said was that it might be a video issue. I checked and there aren't any issues mentioned and no driver updates listed.
We tryed installing this on my b/f's laptop. He bought the exact one I have (except his is red.. mine blue.. lol) and it does the EXACT same thing...
So today we called dell. they say it's a software issue and won't answer any questions for free. Apparently only hardware support is free... But they won't accept this is a hardware conflict with the software..
errrrr
Anybody have any clues on this?
=======================================
LAPTOP SPECS:
Inspiron 1721 Notebook: AMD Turion 64 X2 Mobile Technology TL-56 (1MB/1.8GHz) Genuine Windows Vista Home Premium
Operating System
Genuine Windows Vista Home Premium
Memory
2 GB DDR2 SDRAM 677MHz (2 DIMMs)
Hard Disk Drive
120 GB SATA Hard Drive (5400 RPM)
Video
ATI RADEON Xpress1270 HyperMemory
Media Bay
8X DVD +/- RW w/dbl layer write capability
Base
Inspiron 1721 Notebook: AMD Turion 64 X2 Mobile Technology TL-56 (1MB/1.8GHz)
Bluetooth Wireless
Bluetooth Wireless Card 355
Software Upgrade
Microsoft Works 8.5
Premium Pack - Advanced Photo+Music: Deluxe Pack + Paint Shop Pro XI
NoteBook Screen
17 inch WXGA+ TrueLife Glossy Notebook Screen
Hardware Upgrade
No Camera
6 Cell Primary Battery
90W AC Adapter
Network Interface Card
Dell 1505 Wireless-N

Rob - thanks for taking a stab at this.
I have tried installing from the DVD and also from the zip file. the zip file was extracted to the hard drive brfore I ran it - and I ran it as administrator.
And when it stalls - it gives the (NOT RESPONDING) tag on the window - which usually means that even if I leave it (and I have for up to 20 minutes) - still nothing.
Here's the update from my dealings with DEll today...
Dell tech support guy told me that it was a know issue that CS3 WON'T run on Vista and that Adobe is working the issue
Told them that I knew others that were running it on Vista and it worked fine. They had no answer.
Then I waited for the Technical support manger to call. This is after expressing my displeasure to the technical supervisor about them trying to pawn this issue off on anyone else but themselves. Why can't they go grab a 1721 off the shelf and replicate the issue and try to figure it out from there?!?!?!
I used to work on a network helpdesk.. if I tried to pull that crap answer without trying to replicate the issue and AT LEAST try to find an answer.. I wouldn't have lasted very long at all!!!!
The Tech manager told me to call customer support and ask for an OS swap (from vista to XP) because they don't know what the problem is and so it muct be a Vista compatibility issue
I call customer support. They say that they no longer will give out XP since it is a step backwards. And to install XP on the machine ourselves (even a liscensed copy) would void the warranty. They suggest I talk to sales about swapping the laptop out with a "more compatible" one. Which isn't a totally bad idea since I really do think it is an AMD/ATI conflict.
They transfer me to Sales.. ohh - you used the Employee Purchase program.. you need to talk to them.. and they transfer me.
The EPP people tell me.. ohhhh you didn't actually go through us since you bought it off the Dell Outlet store. So they transfer me.
The dell outlet store says they will be more than happy to swap me out to an Intel based machine.
Only catch is the Intels are more expensive. They don't have any for the price we paid for the amd's. Fot about $40 more I can get one with a slower processer, a gig less ram, no dvd writer, but with a 160gb hd. To get compatible to mine - would be about $150 more.
And they only have silver in the low end, and black or brown in the higher. Not that I really give a s@!t what the color is.. but it brings up the main reason I am sooo pissed abput all of this....
Why should I have to pay more money, settle on doing without option/features want/need.. just because THEY don't want to take the time to figure out what the real issue is?!?!?! Why isn't it them doing these calls and doing all this troubleshooting.. Why am I being peanilzed for THEM not wanting to do their jobs....
Told the B/F that I am done with Dell. That I don't want the laptop anymore and I don't want any other one from them. He says he'll pay the extra and get me the other one.. but that isn't the point....
Not sure what my next move is.

Bridge won't run. Should I reinstall it?

1.I went to Windows>Workspace, and "Output" was not there.
2. I read at adobe.com help that I should check for updates and then download the "Output" workspace, then put it at the right extension.
3. I did that.
4. Now Bridge won't start.
It doesn't seem normal that adding a workspace should make this happen. At least I should get an error.

Thanks, station_two.
I'm using Photoshop 14.0 x64
I've downloaded and reinstalled whatever version of Bridge installs currently on CC.
Mac OS X version 10.7.5, 4gigs of memory, 250 free gigs of disk space.
I'm not receiving an error message.
The problem I have is that Bridge won't run. I've uninstalled and reinstalled it, checked all of the updates. The way I'm trying to run it is by clicking on the icon under Launchpad. I tried another method: going into photoshop and clicking "Browse in Bridge," but that's not working. I tried using mini bridge. It says that it is waiting on Bridge, and the Bridge menu bar appears and disappears on a regular interval, and the icon appears and disappears on the same interval on the Dock.
This seems to have started when I tried using the instructions described here Install Adobe Output Module and here How do I navigate to the Application Support folder in Mac OS 10.7 and 10.8? to use the Output method for create a portfolio. I've tried going back and undoing those changes.

HP Pavilion 23t AIO PC won't run Battlefield smoothly

My father bought me the Pavilion 23t AIO, thinking that it would be a good gaming computer, but upon me testing my game Battlefield 3 with the normal graphics and settings, and the game was incredibly laggy. I changed the settings to the lowest, and the game still won't run completely smoothly, and twice it closed itself out on me. I'm wondering if I need a new graphics card or not, please respond quickly!!
This question was solved.
View Solution.

SniperProffesor, welcome to the forum.
The good news is, you have very nice computer. The bad news is, it is not good for gaming. The video card slot is MXM (One PCI Express MXM slot that supports a PCI Express x16 graphics card (Generation 2 speed). Here are the specs on it:
One Mobile PCI Express Module (MXM) socket
MXM 3.0 version: Type A
<35W
It is difficult to find these video cards because they are usually sold as OEM components. Your best bet would be to shop ebay for one. I am not certain that this card would even make your gaming experience better.
Please click the "Thumbs Up+ button" if I have helped you and click "Accept as Solution" if your problem is solved.
Signature:
HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
HP Photosmart 7520 AIO
++++++++++++++++++
**Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
Intelligence is God given; Wisdom is the sum of our mistakes!
I am not an HP employee.

Programs won't run after update to 10.6.7

Hi
I have just inherited an early 2008 iMac following my Dad's death a few months ago. So I have no Mac experience at all. On receiving it, I booted it up and a list of recommended software updates appeared which I ran, and by all accounts successfully installed. One of them was an update to 10.6.7
Previous to the update I could access the installed programs. Now I can access barely any of them.
Error message reads:
Application name cannot open.
Check with the developer to ensure this version of application name works with this version of Mac OS X. You may need to reinstall the application. Be sure to install any available updates for the application and Mac OS.
There aren't any further updates needed. Every time I check, I'm advised everything is uptodate. So last night I reinstalled iTunes, downloading the latest version. That won't run. Same error message.
I'm unsure what to do now. I don't have any disks etc at the moment as Mum is still trying to locate them (they had more than one property and this has come out of one that has been boxed up and put onto the market).

This is a typical error report. The section I have bolded out seems to be common in all the errors.
Process:         iTunes [500]
Path:            /Applications/iTunes.app/Contents/MacOS/iTunes
Identifier:      com.apple.iTunes
Version:         ??? (???)
Build Info:      iTunes-10221201~1
Code Type:       X86 (Native)
Parent Process: launchd [105]
Date/Time:       2011-05-11 06:38:32.490 +0100
OS Version:      Mac OS X 10.6.7 (10J869)
Report Version: 6
Interval Since Last Report:          15167 sec
Crashes Since Last Report:           305
Per-App Crashes Since Last Report:   6
Anonymous UUID:                      DCCD367C-006F-4EEF-8457-3885D045DBBE
Exception Type: EXC_BREAKPOINT (SIGTRAP)
Exception Codes: 0x0000000000000002, 0x0000000000000000
Crashed Thread: 0
Dyld Error Message:
Library not loaded: /System/Library/Frameworks/AudioToolbox.framework/Versions/A/AudioToolbox
Referenced from: /Applications/iTunes.app/Contents/MacOS/iTunes
Reason: no suitable image found. Did find:
          /System/Library/Frameworks/AudioToolbox.framework/Versions/A/AudioToolbox: unknown file type, first eight bytes: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
          /System/Library/Frameworks/AudioToolbox.framework/Versions/A/AudioToolbox: unknown file type, first eight bytes: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Binary Images:
0x8fe00000 - 0x8fe4162b dyld 132.1 (???) <1C06ECD9-A2D7-BB10-AF50-0F2B598A7DEC> /usr/lib/dyld
Model: iMac8,1, BootROM IM81.00C1.B00, 2 processors, Intel Core 2 Duo, 2.8 GHz, 4 GB, SMC 1.30f1
Graphics: ATI Radeon HD 2600 Pro, ATI Radeon HD 2600 Pro, PCIe, 256 MB
Memory Module: global_name
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x8C), Broadcom BCM43xx 1.0 (5.10.131.36.9)
Bluetooth: Version 2.4.0f1, 2 service, 19 devices, 1 incoming serial ports
Network Service: AirPort, AirPort, en1
Serial ATA Device: Hitachi HDP725032GLA380, 298.09 GB
Parallel ATA Device: MATSHITADVD-R   UJ-875
USB Device: Built-in iSight, 0x05ac (Apple Inc.), 0x8502, 0xfd400000
USB Device: IR Receiver, 0x05ac (Apple Inc.), 0x8242, 0x5d100000
USB Device: BRCM2046 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0x1a100000
USB Device: Bluetooth USB Host Controller, 0x05ac (Apple Inc.), 0x820f, 0x1a110000

I am trying to update my mac to os x snow leopard but the cd won't run on my computer

I am trying to update my mac to os x snow leopard but the cd won't run on my computer. I'm using an external dvd hardrive but I don't see why that would make a difference in wether or not it runs.

Well, that may be the cause of the no install problem, as Snow Leopard does require at least 1gB of RAM. The Apple link below will show how it is installed.
http://support.apple.com/kb/ht1651#link3
The link below is for a highly recommended site to purchase additional RAM.
http://eshop.macsales.com/shop/memory/Apple_MacBook_MacBook_Pro/Upgrade/Macbook_ selector

MOVED: Won't run with 2 CPUs

This topic has been moved to Server/workstation.
Won't run with 2 CPUs

Okay. Power supply info. Had to break my system down because the side that had the info on it was covered by the top of the tower.
Enhance Electronics
Model: ATX-1140F with Outlet
400 Watt Power Supply
+3.3v(28A), +5V(38A), +12V(18A), -12V(.8A), -5V(.5A), +5VSB(2A)
The 4 pin connector is plugged in. =) I did not overlook that.
As for trying it with fewer memory sticks, no I have not tried that but keep in mind that earlier today the previous mobo was in this machine and running with both CPUs and all 3 memory sticks (512, 512, 1024). All in the same memory slots as the original mobo. I pulled each one and inserted it in the new mobo before taking out the next one to be sure I put them back in the same slot.
I checked and double checked all the bios settings and they match. The only thing that has changed since this morning is the replacement mobo and that is the exact same model as the one I replaced. System works fine with 1 CPU but not with 2. What might cause that on this motherboard but not the original one?

5800: apps missing / won't run / "key icon" overla...

A few apps went missing on my 5800, also under Application manager. They're on the SD, and I think all Java. Some apps also started showing a small key icon overlayed at the corner of each app's icon. These apps can't be run.
A restart didn't help, nor a restart without the card and a live reinsertion. After another restart the key icon overlays disappeared but these apps still won't run. They could only be reinstalled after an uninstall, but those that disappeared are stuck in limbo.
Besides the above, one app that was preloaded on the card now has an empty icon, and after two restarts its name shows as a 9 digit number (see below). It can't be run.
All of this on firmware v31. As far as I can tell I didn't do anything to trigger it.
Are there any non-destructive ways to fix it?
Is there a way to use Symbian without all these strange problems popping up all the time (with the usual solution seemingly being total reset/format)?

ur symptoms lead to a diagnosis of corrupt memory card.. Have u installed any of those java programs from free game sites tht, while installin, says ur phone could be harmed? Coz those java games r a bit unstable on nokia5800.. I knw it shouldn't be.. But... It is.. Sometimes there's a read/write error and then they show key icons..
Whatever to solve this, do this..
Connect with computer
When asked choose mass storage mode
Open my computer
U'l find ur memory card listed
Right click, goto properties
There's an option for check disc for errors
Select tht and let it scan and fix errors
After u r done, see if u can uninstall those in limbo.
If not connect again in mass storage mode
Go to ur computer settings and as to show hidden files, and also show important windows files
Open ur memory card
U'l find a FOUND.000 folder.. Delete it
It's unusable by symbian os and it takes on space
Restore ur hidden file settings to normal.
Hope this helps..
Regards,
Dr. Shoubhik

Hp g62 freezes and won't run except in safe mode

My hp g62 won't run except in safe mode and when I run normally it freezes. I been reading in the post of the same existing problems and tried the start up test and it failed the short Dsp. What should I do

Hi @Daver1976 ,
Thank you for visiting the HP Support Forums and Welcome. I have looked into your issue about your HP G62 Notebook and Short DST failing. Here is a link to restore the BIOS.
You could try safe mode disk defragmenter it will scan your computer. Just click on start and type disk. Select C: and select defragmenter.
Please note remove any and all USB devices, and remove memory cards from the card reader slot. Disconnect all non-essential devices.
Here is a link to do a hardware test. It can let you know if something is failing and the code it gives you would be helpful.
Hope this helps you, please let me know if you receive any errors.
Thanks.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

Quicktime in Tiger package won't run

I upgraded from system 9.1 to Tiger and both Quick time and iDVD won't run. A red exclamation point error message appears saying that these applications are not supported. Any suggestions? I also increased the memory and still nothing works.

I would suggest the usual steps, repair permissions, and delete QuickTime's .plist
<small>located in
[YourProfile]/Library/Preferences/com.apple.quicktimeplayer.plist</small>
Otherwise, try to create a new Mac OS X user profile and see if that helps.
OR... try to re-install QuickTime.
Hope these help.

Java JDK 7 u17 won't install and Eclipse won't run past boot logo.

Java JDK 7 u17 won't install and Eclipse won't run past boot logo. Eclipse Classic used to work fine for awhile. I haven't used it for a month or two and tried to boot it, Eclipse won't run past boot logo. It looks like JDK is not even there anymore. JDK won't install successfully. I have Mac OS X 10.8.3.
I tried removing Java, re-download JDK multiple times.. same results.
MyComputer-MacBook-Air:~ MyComputer$ java -version
java version "1.7.0_17"
Java(TM) SE Runtime Environment (build 1.7.0_17-b02)
Java HotSpot(TM) 64-Bit Server VM (build 23.7-b01, mixed mode)

Paul Adare is correct in saying that you cannot "upgrade" from 32-bit to 64-bit. You can, however, backup your files and reload them onto your PC.
Given that you are able to boot Windows 7 after the failure to install Windows 10 Technical Preview, it is apparent that you are not formatting the drive during your clean installation. There are a number of potential issues an existing configuration can
cause, such as preventing Windows Setup from registering boot files, modifying partitions, or moving an existing installation and data to the windows.old folder. I would recommend removing the partitions from your drive (note: this will erase any data remaining
on the hard disk) during installation to ensure that Windows Setup has a fresh hard drive to install to. If you continue to experience errors, two other factors to take into consideration are:
Does your system use a storage controller that requires loading a driver during Windows Setup?
Is the hardware malfunctioning? Do the hard disk and memory pass testing software like Windows Memory Diagnostic or chkdsk?
Reference
this article for more information.
Hessam
Windows Outreach Team- IT Pro
Windows for IT Pros on TechNet

How do I install the FM10 licensing fix when Adobe Update Installer won't run?

Adobe Update Installer won't run so can't install FM10 licensing fix
This question is Not Answered.(Mark as assumed answered)
Aug 9, 2013 12:09 PM
Tags (edit): none (add)
Because FM10 began crashing with "fatal" errors whenever I tried to generate a TOC for a small (65 page) book, I researched workarounds and none of them worked. Now that I have delivered a crippled deliverable via Acrobat manipulations, I would like to fix FM. I uninstalled it and reinstalled it, got some updates, and then received the "licensing fix" error that popped up in January. I'm wondering why this fix was included not in the updates. That said, the licensing fix package, first, would not unzip so I downloaded it again. I unzipped it but I got a message that Adobe Updater Installer could not run and after several clicks I found that file. I reinstalled Adoble Update Installer but it still does not run.
I am running Windows XP and have TCS 3.5.I uninstalled FM and RH but not Acrobat, Captivate, or Photoshop.
So, now what? Listen to my supervisor who says never use FM again?
P.S. Why do I have to enter a title for my question and then do it again when this page opens??

Give Adobe Support a call or contact the TCS team at [email protected] - something in your environment is causing the installer to fail (I'd guess).

Action steps that won't run correctly in PSE 7/8/9 (but did in 4 and 6)

I have a wonderful action that was written to work in PSE 3/4/6. It won't run in PSE 7/8/9. After fooling around for a while, I think I understand why. Adobe changed the way Adjustment Layers are handled. In earlier versions of Photoshop and Elements, Adjustment Layers threw up a modal dialog box. That changed so that Adjustment Layers now appear in the Palette Bin as a palette.
Here a sample of some of the action steps that won't work correctly:
Make adjustment layer
Using: adjustment layer
Type: levels
Set Selection
To: none
Set current layer
To: layer
Name: “Adjustment 1”
Set current layer
To: layer
Mode: luminosity
Stop
Message: “Move gray slider left”
With Continue
Set current adjustment layer
To: levels
In earlier versions of PS and PSE, the way these steps would work is that a new adjustment layer would be created, the dialog box giving the instruction would open, it would be dismissed by clicking "Continue," and then the "Set current adjustment layer to: Levels" would generate a model adjustment layer dialog box would open up which would let one make the adjustment.
In newer versions, since Adjustment Layers are handled in the Palette Bin, after dismissing the instructions, the action doesn't stop to allow the user to make change the sliders on the adjustment layer.
The action runs perfectly in CS4 and CS5 and throws up the levels adjustment modal box as it did in PSE 4 and PSE 6, but the action doesn't throw the modal box in PSE 7/8/9
Does anyone know of a way to alter the action steps to allow the action to stop to allow the adjustment and then to resume again?

Adding a new levels adjustment layer on top of the Midtone contrast layer
should work, just use a clipping mask to restrict the adjustments to the
areas of the levels adjustment layer below. The histogram will be different, but
actually testing the action is really the only way to know if that makes any difference.
Replacing the levels adjustment layer is another option, though it requires a few more steps.
The following assumes when the action gets to this point,
the Midtone contrast adjustment layer is the active (selected) layer.
To record this part of the action:
1. Duplicate current channel (in the channels panel. drag the Midtone contrast mask
    down to the Create new channel icon at the bottom of the channels panel)
2. Ctrl+click on the newly created channel (Midtone contrast mask copy)
    This loads the selection of that channel.
3. Drag the new channel (midtone contrast mask copy) to the trash icon at the bottom
   of the channels panel.
4. Back in the layers panel, delete the Midtone Contrast adjustment layer.
5. Go to Layer>New Adjustment Layer>Levels
    This creates a new levels adjustment layer using the selection loaded from
    the duplicated channel and opens the levels dialog.
To load the RGB (composite) as a selection, Ctrl+click on the rgb in the channels panel
and the same is true for the red, green and blue channels.
With layer masks, elements doesn't seem to want to load them as selections in actions,
so that's the reason for the action steps above.
MTSTUNER

CS2 won't run

CS2 won't run, says activation code no longer usable. Been running win7 on this system 3 years. Adobe says it won't activate in win7. Well, it did, and ran just fine. what's up?

I assume when you say "Adobe says it won't activate in win7" that you talked to customer support....
A drive change could trigger the need for reactivation. Did you tell them that you're running from a mirrored drive?
It sounds to me that they're being aggressive about trying to get you to upgrade when they should still be supporting you with active maintenance of their activation database.
But unfortunately if you can't get them to adjust their database you're out of luck.
-Noel

I have a Windows 2003 Server 64-Bit, and when I upgraded to Firefox 4.0.1 now it won't run, it keeps saying to restart to complete the installation, but I've restarted theserver 4 times, and I still can't use it.

I have a Windows 2003 Server 64-Bit, and when I upgraded to Firefox 4.0.1 now it won't run, it keeps saying to restart the computer to complete the installation, but I've restarted theserver 4 times, and I still can't use it.

I ended up putting it in DFU mode. It's kinda hard to tell it was in DFU mode because nothing showed on the screen, it was just black, but the sounds from the computer helped to tell me it was connected.
Itunes still didn't recognize the device for whatever reason.
So I used redsn0w. I don't know if I can say that on these forums, but considering itunes was worthless at this point I am going to give credit where credit is due.
Now I am giving itunes a second chance to upgrade to 5.1, if it doesn't work, well, back to redsnow and maybe I will even jailbreak it this time rather than just using the fecovery fix found under extras.

955 won't run memory in 1333mhz

Similar Messages

Maybe you are looking for