9i and 10g Listener in SUN box How do i stop .while applying the patch.
Hi,
Sun box running - I am having
1. oracle_home 9i Version (database's are running)
My team installed 10g Version 10.2.0.1 in Oralce_home1 there were no database are running in 10g, Now We plan to upgrade into 10.2.0.4 in oracle_home1 while applying patch its asking to stop the listener process.
Is it mean to stop 91 listener or 10g listener?
I had checked the running process in my server using grep -ef
it show all process 9i database's and i find this home1/oracle/product/1020/bin tnslsnr LISTERNER -Inherit. How do i stop ? after applying the patch how do i start?
Is it require down time?
Thanks in advance.
Rajas
Hi
When i check the lsnrctl status it is showing the error , How do i resolve it?
In sun box:
/home1/oracle/pro/920/bin -9i is running
/home1/oracle/pro/1020/bin 10g is running
When i check the lsnrctl status the above oracle home it through error
Connecting to (ADDRESS=(PROTOCOL=TCP)(PORT=1521))
TNS-12618: TNS:versions are incompatible
Thanks in advance
Rajas.
Edited by: Rajas on Sep 23, 2008 8:36 PM
Similar Messages
-
how do sync a book that I have added as music to itunes on my iMac and then listen to this book on my iPhone. Itunes says the icloud status is waiting so the song(book) is in the process of being matched but has not yet been processed. (no help there)
Hi,
Why are you trying to add a book as music? It will not match as this only applies to music files. It will be uploaded if the bit rate is 96 Kbps or greater.
You should change media type to audiobook and you will be able to sync by wifi or USB.
Jim -
I just got iphone 5c and i am not happy with it. It uses to much data and i don't even know how. I can't get the ringtones i want for my contacts.I got it on my free upgrade but i want to take it back and get something else but where i got it they say i can't because i don't have the earbuds and i have serches or them. now i am suck with a phone i don't like at all until my next upgrade. this is very dishearten
1. If you are this unhappy with that phone, and the lost earbuds is the only thing stopping you from taking it back, why do not just buy some earbuds. That way you can get rid of that phone. It all depend upon how much you want to get rid of that phone.
2. Yet if you are stuck with that iPhone, here is something might help you to control the data usage. By design, iPhones do turn off WiFi when they go dormant. So if a download is in progress and so forth when the phone goes dormant, it will switch to use cellular data, if this setting is left on. Therefore, from multi-sources I have learned that if you keep your iPhone connected to a power source, then it will stay connected to the available WiFi. -
my ipad has gone in lost mode by mistake and now i have it and i enter the password and i cant enter my ipad how can i enter or restart the ipad and start back over new
FORCE IPAD INTO RECOVERY MODE
1. Turn off iPad
2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port.
DO NOT RELEASE BUTTON until you see picture of iTunes and plug
5. Release Home button.
ON COMPUTER
6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
7. Select "Restore iPad"...
Note:
1. Data will be lost if you do not have backup
2. You must follow step 1 to step 4 VERY CLOSELY.
3. Repeat the process if necessary. -
How do I re-download podcasts? My external hard drive failed and I can't figure out how to download them again in the updated iTunes.
The Time Capsule drive is a network drive. You have to mount it on the desktop before you will be able to drag/drop files onto the disk. More tips are in this thread:
https://discussions.apple.com/message/17312017#17312017
.....and then delete them from the Mac to free up space?
The Time Capsule was designed for your backups.
If you move a file to the Time Capsule drive and delete the file from your Mac.....you have no backup.
Your only copy of the file will be on the Time Capsule drive. I would only do this with files that I could afford to lose.
All drives fail. When.....not if....the Time Capsule drive has a problem, you will lose your data. -
I uploaded a video from a flashdrive to my Mac and it compressed the video to lower quality and shrunk it in size. How do I get it to the original size?
It changed the Aspect ratio of the video, as if it had been shot on a phone instead of a camera. When first looking at the footage it was in landscape aspect but when I transfered it to a memory unit to put on a different computer it uploaded it in a different ratio
-
Help! How do I stop photos in the albums of the photo app on my iPhone 6 from being scrambled and randomized after syncing to iTunes?
Hi LoboCatholic,
I apologize, I'm a bit unclear on the exact nature of the issue you are desscribing. I am not certain that this will address your specific issue, but if you are having photo organization issues in iOS 8 on your new iPhone 6, you may find the following article helpful:
Get help finding your Photos in iOS 8 or later - Apple Support
Cheers,
- Brenden -
I have a new computer and my old drive has my UNSAVED bookmarks on it and I want to import them, how do I do it when the bookmarks are not SAVED?
You can backup the bookmarks on the old computer and create a JSON or HTML backup and restore or import this file in the Bookmarks Manager (Bookmarks > Show All Bookmarks).
You can use an USB stick to transfer the saved bookmarks file to the new computer.<br />
You can also copy the places.sqlite file from that computer to have the bookmarks and the history.
*http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox
*http://kb.mozillazine.org/Backing_up_and_restoring_bookmarks_-_Firefox -
Please I just got an iPad 3 and it keeps restarting itself. How do I stop this. Done hard reset and system reset.
iTunes: Restoring iOS software
You will probably need to restore using Recovery Mode.
iPad: Unable to update or restore
Recovery Mode Instructions
Disconnect the USB cable from the iPad, but leave the other end of the cable connected to your computer's USB port.
Turn off iPad: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for iPad to turn off.
If you cannot turn off iPad using the slider, press and hold the Sleep/Wake and Home buttons at the same time. When the iPad turns off, release the Sleep/Wake and Home buttons.
While pressing and holding the Home button, reconnect the USB cable to iPad. When you reconnect the USB cable, iPad should power on.
Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears you can release the Home button.
If necessary, open iTunes. You should see the recovery mode alert that iTunes has detected an iPad in recovery mode.
Use iTunes to restore iPad. -
each time I open foxfire a .LNK popup appears asking how to process a download opens and inhibits use of foxfire. How do I stop this and allow me to open and use foxfire browser. This started after I attempted to follow directions to install/associate a .LNK program/file with foxfire to control saving downloads using any browser. Note that I am a novice user. How can I stop this?
The Reset Firefox feature can fix many issues by restoring Firefox to its factory default state while saving your essential information.
Note: ''This will cause you to lose any Extensions, Open websites, and some Preferences.''
To Reset Firefox do the following:
#Go to Firefox > Help > Troubleshooting Information.
#Click the "Reset Firefox" button.
#Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
#Firefox will open with all factory defaults applied.
Further information can be found in the [[Reset Firefox – easily fix most problems]] article.
Did this fix your problems? Please report back to us! -
iTunes 12.1.050 - Rollback: Updated from 12.01, now I cant't change track numbers and add additional data fields. How can I roll back to the previous version? @Apple, I want a $100 gift card for the inconvenience.
- it's all said in the title. I can't understand why the developers turn things bad ... risking loosing Apples valuable customers.
More examples needed? (check out the communities and the reviews)
- OSX: Maverick to Yosemite = not recommended (check it out > http://roaringapps.com/apps)
- iPad: older versions as iPad2 should not upgrade to iOS7/8 (it's not supporting its hardware accordingly, it's designed for the latest hardware)
- iTunes (it's possible to rollback to 10.7 - 11.4, but you need to breech OSX system security framework)
- Pages (was a real alternative for many of us, each update reduced features and created incompatibility to older work files)
The list could easily extend to ...You can offer Apple feedback here: http://www.apple.com/feedback/
as for "
"@Apple, I want a $100 gift card for the inconvenience"
dream on. -
im trying to play a game on my laptop and i need to use the keys alt and f4 but when i do that it takes me out of the game and brings me to my settings how can i stop this?
Go to the game's option settings and change the settings to something more to your liking.
-
My macbook keeps locking all of my folders and files, even when I try unlocking them myself in Get Info and disabling autolocking in Time Machine, how can I stop the locking as well as unlock my files?
Managed to solve this myself. Just went to properties > hidden.
-
Every time I upload photos to Facebook it connects through an IOS folder and attaches to old comments etc, how do I stop this and just upload normally
If you read the user tip you will see that you do not access your photos from the finder but from the upload window in your browser when you log into Facebook and go to upload - in the upload window the media browser in the lawer left hand corner - media ==> photos ==> iPhoto
LN -
I hit the wrong monitor refresh rate and now lost monitor picture. How can I get back to the right refresh rate with no pic to view?
Try this:
Mac OS X 10.6 Help: If you changed your display’s resolution and now it doesn’t display a picture
Maybe you are looking for
-
DVD burning error in Premiere Elements 11
I recently filmed a friend's memorial service for their family. I have footage from two different cameras that I have edited in Premiere Elements 11, for the purpose of making a DVD of the service. I run into a problem when I try to burn the project
-
EEK!! i lost all my songs!! how do i get them back?!?!
ok..so we just got a new computer cuz my last one crashed and all my songs and itunes was on it. so now im on a new one and i just downloaded itunes onto this comp and wanted my songs to come up, but when i plugged it in, it said "The iPod "Alyssa's
-
FlexUnit is working with FlashBuilder and not working with Build file
Hi I have few flexunit test cases . When I am running those testcases from Flashbuilder FlexUnit plugin I am able to run all the testcases and when I run Build file to run those testcases , build file is launching my testrunner swf file and it is thr
-
hai, how can i get the shipto party no by linking kna1 and likp. with thanks aru
-
How to view logical port error log
can anybody tell me how to view the logicalport error log