A/c assignment category for material type

Hi Gurus,
1) Can I fix a/c assignmnet category for a material type? For example, I want a/c assignment category K for NLAG materials. If while creating PO for a NLAG material, somebody forgets to enter A/c assignment category, it should give an error msg "A/c assignment category is manadatory for the material type"?
2) If Gr-based IV is not checked in ERS PO, then while running MRRL statement, what type of error should come and what will be the remedy at that stage?
Thanks,
Kumar

> 1) Can I fix a/c assignmnet category for a material type? For example, I want a/c assignment category K for NLAG materials. If while creating PO for a NLAG material, somebody forgets to enter A/c assignment category, it should give an error msg "A/c assignment category is manadatory for the material type"?
You Cannot Fix account assignment Category for a Material type.
> 2) If Gr-based IV is not checked in ERS PO, then while running MRRL statement, what type of error should come and what will be the remedy at that stage?
GR Based IV is an Optional. If you Activated this in Vendor MAster and PO then System wont allow to Post IR before GR.

Similar Messages

  • Purchase Requisition / Order: Account Assignment Category for material type

    Hi,
    When creating a PR or PO for one specific material I would like the system to propose a specific account assignment Category for this material. It shouldn't allow the user to change this account assignment category.
    Is it possible? How should I proceed?
    Thanks in advance.
    Luis.

    I dont think there is any standard procedure for doing this.
    My idea would be to use a user exit say EXIT_SAPLMEREQ_010 for PR and a similar exit for PO and code a Error message check for Material type and account assignment combination.
    For ex : EXIT_SAPLMEREQ_010 is a exit which is called during check in a PR . SO when the user enters a combination of Material type and Acc assignment u can check for the requirements.

  • Category for material type MAT_KMAT does not exist for configurable product

    Hi,
    Trying to download Confihurable product from ECC to CRM,for this I am getting the below error.
    "Category for material type MAT_KMAT does not exist"
    For this , i have successfully downloaded the object DNL_CUST_PROD1, but still the  material type MAT_KMAT does not exist under R3PRODSTYP in COMM_Hierarchy transaction.
    kindly let me know how to get the material type MAT_KMAT  under R3PRODSTYP .
    Regards,
    PV

    Hi
    Please go through the below pdf document. This will be useful.
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/9076a9a4-923c-2c10-7483-d997a9eae976?quicklink=index&overridelayout=true
    Regards

  • Account assignment category for Packaging mterial

    When I create purchase order for a packaging materials , it is asking for a account assignment category. We dont want to create accounting documents as well as we dont want to use account assignment category. Is there any way to suppress the error message - account assignment mantory for material type?

    Hi,
    For Packing materials which material type you used. I think you have created in Non stock materials/Non Valuated Materials material type.
    If you use NLAG material type then you need to enter the A/c assignment category.
    So always for Packing Materials you should use VERP Material type. As Packing materials are Inventory items so you don't need to enter the Account assignment category in PO.
    Hope you got it.
    rgds
    Chidanand

  • How to enter an account assignment category for a material.

    Hi guys:
       I am facing following error prompt,please tell me how to enter an account assignment category for a material.
    thanks
    Account assignment mandatory for material 0000000N6451 (enter acc. ***. cat.)
    Message no. ME062
    Diagnosis
    There is no provision for value-based inventory management for this material type in this plant. Account assignment is thus necessary.
    Procedure
    Please enter an account assignment category.

    HI Shyam :
    Go to transaction type OMS2. Check whether the material type u are using is ticked for Value update.
    If not,
    a. Use a different material type
    b. or Use an account assignment category.
    How to use B,that is hot to enter an account assignment cateogory

  • No external no.assignment possible for material for material type HALB??

    no external no.assignment possible for material for material type HALB??... message no:m3317
    i got this error msg while i try to create external material via mm01
    material: pump
    industry type: mechanical engineering
    material type: semi finished product
    after pressing enter error came...

    Hi
    If you created number range already, then you need to remove the number range and recreate the same with external number range w/o check
    Try it out.
    Thanks
    Raman

  • Account assignment mandatory for material

    Hi,
    While creating contract i am facing this warning message..i can ignore this message , but what is the root cause for it.
    Error is :
    "Account assignment mandatory for material 100000040 (enter acc. ***. cat.)
    Message no. ME062
    Diagnosis
    There is no provision for value-based inventory management for this material type in this plant. Account assignment is thus necessary.
    Procedure
    Please enter an account assignment category"
    I checked Qty and value update in OMS2 also.
    It is maintained.
    Then what is wrong?
    Uts

    Hi,
    Account assignment determination depend on the valuation class. When your account assinged category is mandatory in that case go and see the account modifier assigned in account assinged category. After that verify the G/L account in OBYC for key GBB and account modifier and respective valuation class assigned in material master.
    If the entery does not exist then system will give you an error message.
    Regards
    Prashanth

  • Account assignment mandatory for material 702 (enter acc. ***. cat.)

    Account assignment mandatory for material 702 (enter acc. ***. cat.)
    Message no. ME062
    Diagnosis
    There is no provision for value-based inventory management for this material type in this plant. Account assignment is thus necessary.
    How to rectify this error

    Go to transaction type OMS2. Check whether the material type u are using is ticked for Value update.
    If not,
    a. Use a different material type
    b. or Use an account assignment category.
    Regards,
    Anantha

  • PO: Default Account assignment category per material?

    Hello,
    The requierement of my company is that some materials are purchased for stock and some others for Cost center. But at some point they want to move some of the materials of "cost center" into "stock". So materials will be  "looking" the same in questions of views created, etc.
    So it would be good if there is a way to default the account assignement category by material. Any idea? User-exit?...any possibility totally standard of doing this (withouth enhancemnet/user-exit)?
    Release 4.6c

    Hi,
    It can be done by having two doc. types in the PO one for the stock and the other one for the consumption.No need for the two material types.
    In doc type xy -account assignment is disabled, in the other doc type XZ the account assignment is enabled.
    Also using the user exit ME_PROCESS_CUST, you can define the condition against the doc type.
    Regards,
    velu

  • Where can I define Account assignment category for order settlement rules

    Dear Gurus,
        When I used Tcode: CO07 to create a rework order for parent order. But I cann't find the Account assignment category = Ord (Order) in the maintain Settlement rule overview.
      Where can I define Account assignment category for order settlement rules?
      Please help me. Thanks!
    Regards
    Paul.

    I've resolved this question.
        Firstly, run OPJH - Define Order Types, we should assign settlement profile for the order type.
        Secondly, Run OKO7-Maintain Settlement Profile, find and mailtain the settlement profile. In 'Valid Receivers' we should set the field 'Order' = 1-(Settlement Optional).
        Thirdly, run CO07 - Create Order without material. We can find account assignment catetory 'ORD' in maintaining Settlement rule.
    Edited by: Paul Chan on Feb 16, 2009 5:15 AM

  • Authorization for material type and material views

    Hello all,
    I would need to restrict a user group, in creation (MM01) and modification of material master, based of type material and material views.
    The authorization, for each user should be:
    - view, modify and create of all views, except accounting (B) for type material ZFER;
    - view, modify and create of all views for type material ZOFF.
    I tried to create 2 roles in PFCG with the following authorization objects:
    1) M_MATE_MAR (Material Master: Material Types)  ACTVT = *, BEGRU = ZFER and M_MATE_STA (Maintenance Statuses) ACTVT = *, STATM = A,C, D, E, F, G,K, L, P, Q, S, V, X, Z (excluding B)
    2) ) M_MATE_MAR  ACTVT = *, BEGRU = ZFER and M_MATE_STA ACTVT = *, STATM = B
    but the effect is to be authorized, to all view for material type ZFER and ZOFF.
    I have already updated the authorization group of the type materials (OMS2).
    Is there a solution for this problem?
    (component version SAP ECC 6.0)
    Thanks.
    Regards,
    Luca

    I tried to create 2 roles in PFCG with the following authorization objects: 1) M_MATE_MAR (Material Master: Material Types) ACTVT = *, BEGRU = ZFER and M_MATE_STA (Maintenance Statuses) ACTVT = *, STATM = A,C, D, E, F, G,K, L, P, Q, S, V, X, Z (excluding B) 2) ) M_MATE_MAR ACTVT = *, BEGRU = ZFER and M_MATE_STA ACTVT = *, STATM = B
    - Are both these roles assigned to the same user? then your purpose is not solved, It is more or less like giving full authorization.
    - One role should be
    M_MATE_MAR (Material Master: Material Types) ACTVT = *, BEGRU = ZFER and M_MATE_STA (Maintenance Statuses) ACTVT = *, STATM = A,C, D, E, F, G,K, L, P, Q, S, V, X, Z (excluding B) for view, modify and create of all views, except accounting (B) for type material ZFER. This should be assigned to one user
    - Second role should be
    M_MATE_MAR ACTVT = *, BEGRU = ZOFF and M_MATE_STA ACTVT = *, STATM = * for view, modify and create of all views for type material ZOFF. This role should be assigned to the second user.
    Regards,
    Subbu

  • Where to configure Account Assignment Category for WBS Settlement Rule?

    Hi,
    I would like to know where is the Account Assignment Category for WBS settlement rule (FXA, CTR, G/L, WBS)  being configured. (SPRO Path)
    Currently when I go to our settlement rule creation screen I can only see WBS and FXA, I need to add MAT (Material)
    Thanks!
    Regards,
    Vivian

    Hi Shrikant,
    Do you mean in my CJ02 WBS Settlement Rule creation screen, I cannnot put MAT as account assignment category?
    Does it mean that WBS element CANNOT be settled to material? and we can only settle PM order to material?
    Thanks!
    Regards,
    Vivian

  • Defalting Account assignment category for PRs

    Hi,
    How do I configure to have automatically default a u201CAccount assignment categoryu201D depending on PR document type, so the user cannot change/enter Account assignment categoryu201D .
    For example if the PR type is u201CService PRu201D, all line items must have the u201CAccount assignment categoryu201D as u2018Ku2019 and if the PR type is u201CCapital PRu201D the   u201CAccount assignment categoryu201D must always be u2018Au2019

    Hi there,
    There is no direct way to link document type and account assignment category.
    But you can try this which is close.
    --> One is through Personal setting in PO screen.
    Can be done at Personal Setting TAB in application toolbar( extreme right side) in the PO (ME21N) screen.
    Click default value
    PO header , enter your PO document type &
    PO item, enter acc. ***. Cat. K
    & Save.
    The other way is controlling through the item category, maintain only one account assignment category for your item category in SPRO > Materials Management > Purchasing > Account Assignment > Define combination of item category/account assignment category.
    Regards,
    Senthil

  • Batch no assignment as per material type

    Hello All
         I have requirement wherein the batch no is dertermined based upon the material type, I have used userexit EXIT_SAPLV01Z_001 for the same, initially it was finalised that batch no would be inernal, so I went for internal batch no assignment wherein I was using no. range object BATCH_MAT & I have defined sub-object for each material type & assigned no. range interval for each sub-object. It was working fine.
              Now  there is a requirement that for material type ROH(raw material) batch no has to be externally assigned. Kindly suggest how this requirement can be catered. Looking forward to your valuable inputs.
    Regards,
    J K Tharwani

    Thanks Aneesh for your valuable inputs,
            I am able to resolve my problem, what I have done let me explain you here, I have used same user exit which I have mentioned in this thread & I have defined a subobject ZROH under No Range object BATCH_MAT with no range interval as: AZZZZZZZZZ-ZZZZZZZZZZ(External).
    Now for movement type 101 I have I have done little change in the customization of Batch Management. I have set indicator as "B"(Automatic/manual & check in user exit) in following node:
    SPRO>Log Gen>Batch Mgmt>Creation of new batches>Define Batch creation for goods movements.
          The above settings have resolved my problem.
    Regards,
    J K Tharwani

  • Issthe PO Error message *Account assignment mandatory for material

    At the time of creating the PO after putting the material and plant I get the error message " *Account assignment mandatory for material 10000213". The plant for which i want to raise is 3004 which i have created recently and only in this plant this message is showing. Please help me out
    Edited by: amitekum on Sep 17, 2010 12:34 PM

    you should have searched sdn first for this
    anyways it means that the in tcode OMS2.
    you need to mark the check box quantity and value updation for the material type of your material in combinationwith your plant
    it means this material is acting as consumable material

Maybe you are looking for

  • My (C:) drive went to nearly half the max capacity after complete factory restore.

    So, about a month ago I recovered my notebook pc to factory defaults because of a strange issue that would not allow me to open up to the login screen. After recovery and the re-configuration of all my preferences and whatnot I noticed a few differen

  • HTTPS webservice in APEX 4.1.1 on 11gXE database

    Hi, I was trying to integrate APEX 4.1 with Service-Now ticketing tool. Most of the clients use Service-Now or Remedy for their incident management. Service-Now has exposed the incident details with https://demo.service-now.com/incident.do?WSDL. Use

  • I'm gettin a syntax

    whats wrong with this insert statement String insert = ("INSERT INTO reservations (depart, arrive, date, time, cus_num) VALUES ('"+depart+"','"+arrive+"', '"+date+"', '"+time+"', '"+getcusid+"');"); it just says syntax error in sql

  • How to do settlement for service order - error message

    Hi, FYI, right now i'm involving with sap enhancement implementation (4.6c to Ecc6.0).In 4.6c I'm using Z program (SA38) to maintain settlement rule & create session name and then, KO8G for performing settlement.In log issue session, everthing is ok

  • How can i export music from a macbook pro to an iPad?

    how can i export music from a macbook pro to an iPad?