A column does not edit

On my report page, I click the edit. When I edit different columns only one column does not change. It remained the same value as before.
Was there a setting I messed up?
Thanks.

Phil,
Do you mean I have to go outside of application express to oracle root forum to do this?
Thanks.
Lloyd

Similar Messages

SharePoint List Form using InfoPath 2010 "Cannot insert the value NULL into column 'tp_DocId', table 'Content_SP_00003.dbo.AllUserData'; column does not allow nulls"

I am experiencing issue with my SharePoint site , when I am trying to add new Item in List . Error given below :--> 02/03/2015 08:23:36.13 w3wp.exe (0x2E04) 0x07E8 SharePoint Server Logging Correlation Data 9gc5 Verbose Thread change; resetting trace
level override to 0; resetting correlation to e2e9cddc-cf35-4bf8-b4f3-021dc91642da c66c2c17-faaf-4ff9-a414-303aa4b4726b e2e9cddc-cf35-4bf8-b4f3-021dc91642da 02/03/2015 08:23:36.13 w3wp.exe (0x2E04) 0x07E8 Document Management Server Document Management 52od
Medium MetadataNavigationContext Page_InitComplete: No XsltListViewWebPart was found on this page[/sites/00003/Lists/PM%20Project%20Status/NewForm.aspx?RootFolder=&IsDlg=1]. Hiding key filters and downgrading tree functionality to legacy ListViewWebPart(v3)
level for this list. e2e9cddc-cf35-4bf8-b4f3-021dc91642da 02/03/2015 08:23:36.17 w3wp.exe (0x1B94) 0x1A0C SharePoint Server Logging Correlation Data 77a3 Verbose Starting correlation. b4d14aec-5bd4-4fb1-b1e3-589ba337b111 02/03/2015 08:23:36.17 w3wp.exe (0x1B94)
0x1A0C SharePoint Server Logging Correlation Data 77a3 Verbose Ending correlation. b4d14aec-5bd4-4fb1-b1e3-589ba337b111 02/03/2015 08:23:36.31 w3wp.exe (0x2E04) 0x07E8 SharePoint Foundation Database 880i High System.Data.SqlClient.SqlException: Cannot insert
the value NULL into column 'tp_DocId', table 'Content_SP_00003.dbo.AllUserData'; column does not allow nulls. INSERT fails. The statement has been terminated. at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection) at
System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj) at System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject
stateObj) at System.Data.SqlClient.SqlDataReader.ConsumeMetaData() at System.Data.SqlClient.SqlDataReader.get_MetaData() at System.Data.SqlClient.SqlCommand.FinishExecuteReader(SqlDataReader ds, RunBehavi... e2e9cddc-cf35-4bf8-b4f3-021dc91642da 02/03/2015
08:23:36.31* w3wp.exe (0x2E04) 0x07E8 SharePoint Foundation Database 880i High ...or runBehavior, String resetOptionsString) at System.Data.SqlClient.SqlCommand.RunExecuteReaderTds(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream,
Boolean async) at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method, DbAsyncResult result) at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior,
RunBehavior runBehavior, Boolean returnStream, String method) at System.Data.SqlClient.SqlCommand.ExecuteReader(CommandBehavior behavior, String method) at System.Data.SqlClient.SqlCommand.ExecuteReader(CommandBehavior behavior) at Microsoft.SharePoint.Utilities.SqlSession.ExecuteReader(SqlCommand
command, CommandBehavior behavior,

Are you trying to setup P2P? Could you explain the process you followed completely? By anychance you create the backup and then created the publication?
Regards, Ashwin Menon My Blog - http:\\sqllearnings.com

The Table.Column does not exist on the rowset

Hi I have the following issue:
I keep getting a message in Power BI Designer Preview that states:
The 'collections.Name' column does not exist in the rowset.
I have a MySQL DB connected to an Access DB and then I've created and saved a query within Access.
Then I'm bringig in this query into Power BI Designer. To note, I can see my 1 row of data in the Query view of Power BI Designer but my error appears when I goto report after it tries to load the data into the model
the MySQL Statement looks like this:
SELECT orders.TRUNKSHOWID,
orders.ID,
orders.DATEENTERED,
orders_products.NUMBER,
orders_products.SIZE,
orders_products.DESCRIPTION,
products_categories.NAME AS Cat1,
products_categories_1.NAME AS Cat2,
collections.NAME,
Releases.Name,
orders_products.PRICE,
orders_products.DISCOUNT,
orders_products.TYPE,
products.WHOLESALECOST,
orders.FIRSTNAME,
orders.LASTNAME,
orders.ADDRESS,
orders.ADDRESS2,
orders.CITY,
orders.STATE,
orders.ZIP,
orders.COUNTY,
orders.COUNTRY,
orders.PHONE,
orders.EMAIL,
orders.BILL_FIRSTNAME,
orders.BILL_LASTNAME,
orders.BILL_ADDRESS,
orders.BILL_ADDRESS2,
orders.BILL_CITY,
orders.BILL_STATE,
orders.BILL_ZIP,
orders.BILL_COUNTRY,
trunkshows.TRUNKKEEPERID
FROM trunkshows
INNER JOIN (Releases
INNER JOIN ((((products
INNER JOIN (orders_products
INNER JOIN orders ON orders_products.ORDERID = orders.ID) ON products.ID = orders_products.PRODUCTID)
INNER JOIN products_categories ON products.CATEGORYID = products_categories.ID)
INNER JOIN products_categories AS products_categories_1 ON products.CATEGORYID2 = products_categories_1.ID)
INNER JOIN collections ON products.COLLECTIONSID = collections.ID) ON Releases.ID = products.ReleasesID) ON trunkshows.ID = orders.TRUNKSHOWID

Hi
When you create a workbook in DEV, you will be assigning a query for that workbook
When you transport workbook from DEV to QA,the assigned workbook comes along with it
When you transport only query from DEV to QA, there are certain technical elements called query elements which may not have transported properly
To avoid this inconsistency between DEV and QA,it is advisable you transport the workbook again....Create new workbook in DEV, assign a query, transport the workbook to QA
Regards
N Ganesh

SSDT - Using a SharePoint list data feed as source - "column does not exist in the rowset" error

Hey guys!
So, I want to use a SharePoint list data to create a cube/tabular model, in order to make a complex analysis in PPS using MDX.
To create the tabular model, I'm using the SS Data Tools, and importing a feed from the respective SharePoint list (using the _vti_bin/listdata.svcextension and then selecting the list(s) I wanna to import).
Everything looks fine and smooth, I can select and preview the data in the table import wizard, but in the end, when importing, I always get this error IF the table has one or more row of data (if the table is empty, it's ok...) - the <...>
column doesn't exist in the rowset.
(Curiously, when I have the same procedure in PowerPivot for Excel, I have no problems, everything works fine. The problem is that then I get again errors if I try to create a tabular model on SSDT importing a PowerPivot file).
Here's the error:
Had you already tried this in SSDT? Are you experiencing the same trouble?
Best regards, and thanks in advance!
Jorge Mateus
Jorge Mateus

I noticed something else too.
I can't process Tabular Models on both SSDT and SSMS (2012), but I can process Tabular Models created on PowerPivot.
I tried to create a Data Feed connection on PowerPivot, and it was successfully created. However, if restoring the PowerPivot Tabular DB on my SSAS Tabular instance and processing (full) the model through SSMS, it won't work.
Is there anything different on PowerPivot and SSDT related with Partitioning or connections to the data sources?
Regards,
Jorge
Jorge Mateus
Update:
When trying to Restore a PowerPivot file on my SSAS Tabular Server and full process the model:
The operation failed because the source does not contain the requested column. You can fix this problem by updating the column mappings.
More Details:
The 'X' column does not exist in the rowset.
An error occurred while processing the partition 'X_81dabac5-c250-4a8c-8832-ad7fcedd35cb' in table 'X_81dabac5-c250-4a8c-8832-ad7fcedd35cb'.
The current operation was cancelled because another operation in the transaction failed.
X is the first column of the source table, no matter if I chose others on the PowerPivot table.
When trying to import data from a data feed using SSDT:
The 'X' column does not exist in the rowset.
An error occurred while processing the partition 'X_ee6be81f-2235-4113-b404-cfcb20647a38' in table 'X_ee6be81f-2235-4113-b404-cfcb20647a38'.
The current operation was cancelled because another operation in the transaction failed.
X is the first chosen column to import.

[nQSError: 59014] The requested column does not exist in this table.

Hi
As you know this error has been discussed in other threads.. the difference in mine is that not only the time series measures but all the columns are giving me the error...none of the columns are being displayed... The rpd has no consistency errors. can anyone suggest what may be going on?
Error Codes: OPR4ONWY:U9IM8TAC:OI2DL65P
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 59014] The requested column does not exist in this table. (HY000)
SQL Issued: SELECT column1 saw_0 FROM Paint3 ORDER BY saw_0
Thank you
mm58

I guess you have the column in RPD, and it is available for queries.
are you using any time measures? if so check you chronological keys.

The requested column does not exist in this table

Hi All,
I am getting the following error:
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 59014] The requested column does not exist in this table. (HY000)
SQL Issued: SELECT "Customers - Dim".CITY FROM MVDEMO ORDER BY 1
When I tried viewing data online I am able to view the data in the physical Layer. Also I tried connecting thru ODBC Client and issued the same SQL (above) and it returns the data.
I am using Oralce BIEE 10.1.3.2.1 version.
Please let me know if any faced this kinda issue and how to resolve this.
Thank you.

Check your column mapping in the BMM layer in your Customers - Dim logical table. Does the CITY column point to a physical table column?

Argument error; the number of columns does not equal the number of parameters.

I am using the Database Toolkit (Enterprise Connectivity) to check for a network connection and then send information from a local database to a SQL database on the network if needed. In development of the code I continue to receive Error 1 and the Possible Reason(s) is "Argument error; the number of columns does not equal the number of parameters." I am using the DBToolsSelectData.VI to retrieve data from the local MDB file and the DBToolsInsertData.VI to write it to the SQL file. The collection of the data from the MDB file is successful and the connection and validation of the table and columns in the SQL file is also successful. The error occurs when the Insert VI tries to build the query. The number of columns being written (attempted) does match the number of columns in the data, they are both 16 string arrays.

Ok, it's taken a bit, and I have a solution! It took a while to figure out what the DCT is doing, but it seems to be working now.
The reason for the original error is that you were passing into the insert subVI an array of variants - which the input to the VI coerced into a single variant. You were getting the error because as far as the insert VI was concerned you were only passing it a single data value. The way to get around that was to create a cluster with one element for each column value, convert the cluster to a variant and pass the result to the insert VI - see attachment.
In terms of the other modifications, I made a copy of the endurance.mdb file, emptied it and used it as the destination for the copy.
Mike...
Certified Professional Instructor
Certified LabVIEW Architect
LabVIEW Champion
"... after all, He's not a tame lion..."
Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps
Attachments:
NetworkCheck.vi ‏49 KB

My device icon in the left column does not appear. so, I can not make the sync.

my device icon in the left column does not appear.
so, I can not make the sync

Device Not Recognised
For PC > http://support.apple.com/kb/TS1538
For Mac > http://support.apple.com/kb/ts1591

When trying to Forward, the addresses column does not appear

When trying to 'forward' a message, the 'addressees' column does not appear and I cannot select recipients. This suddenly happened a short time ago and I can't figue out why.

When you have a Write window open you toggle the Contact Sidebar on and off with the F9 key.

WPF: How to make the first column does not show row separator and Left column separator in DataGrid?

Our WPF application uses DataGrid.
One of request is that first column of DataGrid does not show row separator and also does not show Left column separator. So it looks like the first column does not belong to the DataGrid. However, when select a row, the cell of first column still get selected.
How do we make it? Thx!
JaneC

Hi Magnus,
Thanks for replying our question and provide your solution!
Your solution works by setting "HorizontalGridLinesBrush" and "VerticalGridLinesBrush" to {x:Null} in the DataGrid style and modify "CellStyle" in first column as following:
<DataGridTextColumn MinWidth="32"
Binding="{Binding CellName}"
CanUserReorder="False"
CanUserSort="False"
Header="Cell}"
IsReadOnly="true" >
<DataGridTextColumn.CellStyle>
<Style TargetType="DataGridCell">
<Setter Property="IsEnabled" Value="False"></Setter>
<Setter Property="Template">
<Setter.Value>
<ControlTemplate TargetType="{x:Type DataGridCell}">
<Border BorderThickness="0" BorderBrush="{x:Null}"
Background="{Binding Background, RelativeSource={RelativeSource AncestorType={x:Type DataGrid}}}" Margin="-1">
<Grid Background="{TemplateBinding Background}" VerticalAlignment="Center" Height="42">
<ContentPresenter VerticalAlignment="Center"/>
</Grid>
</Border>
</ControlTemplate>
</Setter.Value>
</Setter>
</Style>
</DataGridTextColumn.CellStyle>
</DataGridTextColumn>
We found another way to achieve it by using DataGridRowHeader. The good way to use DataGridRowHeader is that we do not need to make the first column ReadOnly (click on first column does not select whole row anymore). Select RowHeader in a row will select
whole row. Move scroll bar horizontally, the row header still keep in visible area.
<Style TargetType="{x:Type DataGridRowHeader}" x:Key="dataGridRowHeaderStyle">
<Setter Property="VerticalContentAlignment" Value="Center" />
<Setter Property="HorizontalAlignment" Value="Center" />
<Setter Property="Height" Value="42" />
<Setter Property="SeparatorBrush" Value="{x:Null}" />
<Setter Property="FontSize" Value="16" />
<Setter Property="Template">
<Setter.Value>
<ControlTemplate TargetType="{x:Type DataGridRowHeader}">
<Grid>
<Border x:Name="rowHeaderBorder"
BorderThickness="0"
Padding="3,0,3,0"
Background="{Binding Background, RelativeSource={RelativeSource AncestorType={x:Type DataGrid}}}"
BorderBrush="{x:Null}">
<ContentPresenter HorizontalAlignment="{TemplateBinding HorizontalContentAlignment}"
VerticalAlignment="{TemplateBinding VerticalContentAlignment}"
SnapsToDevicePixels="{TemplateBinding SnapsToDevicePixels}" />
</Border>
</Grid>
</ControlTemplate>
</Setter.Value>
</Setter>
</Style>
<DataGrid>
<DataGrid.RowHeaderStyle>
<Style TargetType="DataGridRowHeader" BasedOn="{StaticResource dataGridRowHeaderStyle}">
<Setter Property="Content" Value="{Binding CellName}" />
<Setter Property="Width" Value="35"/>
</Style>
</DataGrid.RowHeaderStyle>
</<DataGrid>
JaneC

No values in the details column does not get summarized?

BH
Hi, I have a Crystal Report on Visual Studio 2010. I'm connecting using Ado.Net. I have a report with two columns in the "detail" section. Each column contains currency values. In the footer I have the summary for each of the two columns. The problem is: when one of the columns does not have any values, the summary does not get counted. What do I need to do, so that when there is no value in the column, it assumes that it is zero?
Thank you so much for your help.
Aron

hi Aron,
if you create a new formula referencing the field, and then add a 'null' check to the formula, then this will work.
e.g.
if isnull({your_table.your_field}) then 0
else {your_table.your_field}
now add this new formula to your report canvas and insert the summary based on the new formula.
-jamie

Cfgrid checkbox column does not display bgcolor

I am running CF9 in Firefox and have a page with an editable grid. I have different background colors for certain groups of columns.
When I define a column as follows:
<cfgridcolumn name="HidePrice" display="true" header="Hide Price" width="40" select="yes" bgColor="##E7F3F1" type="boolean" />
it shows as a checkbox but the background color does not show. This same bg color does show in adjacent columns. That's my first problem.
In addition, I have applied some styles to the extJS cells using stuff like this:
.x-grid3-col-8 {height:42px;}
.x-grid3-col-9 {text-align:right;height:42px;}
.x-grid3-col-10 {text-align:center;height:42px;}
.x-grid3-col-11 {text-align:right;height:42px;}
This worked fine before I added the checkbox, but the checkbox field (in this case it's field .x-grid3-col-10) throws off the column count and the subsequent styles affect the wrong columns. As if the checkbox was not a full-fledged grid column.
Anybody have an inkling what's happening?

This hasn't received an answer in almost two months?
I've searched the docs and online and I have yet to find a solution, but BUMP and you're not the only one.

Shared tab in left menu column does not show on one of the computers after setting up Home Sharing

For iTunes 10.3, I have set up home sharing on two computers that run windows 7, I have authorized both computers. The iTunes Shared link for computer 2 shows up on left column for computer 1(main iTunes computer). The problem I am having is that the Shared link for computer 1 DOES NOT show up on computer 2. My network between the both computers is working because I am able to pull/copy music files from computer 1 to computer 2. Why doesn't the Shared link for Computer 1 show up on Computer 2 Itunes left column? Any help would be most appreciated. Thank you.

Nothing had changed when I plugged in my iPod at work today, having changed it to manage manually earlier at home. But after rebooting a few minutes ago, iTunes cranked up and updated the library. The library now appears below DEVICES/iPod on the menu instead of under LIBRARY/Music at the top left, which I'm pretty sure is different from before, but no matter. Also the iPod is still not appearing in My Computer but again, no matter. I am able to play my tunes on the work install of iTunes now and use iDump (which is a helluva lot less trouble than iTunes) to extract them.
Thanks again for all the help.
HP Pavilion, Dell Optiplex Windows XP

Output Column does not have a matching source column in the schema

Hi Everyone,
Can you please help me in this. Already an ETL is loading the data from AS400 TO SQL server. I need to add a new
column. In the Source (OLEDB source) am pulling the data from AS400 using ADO.NET connection manager.
New column is added in AS400. To bring the new column from AS400, I added column name in the query in OLEDB source. Test connection is good. In the Source editor, when I click on preview it gives me the values of the new column and if I click on build
new query also it gives me values for the new column.
After mapping the columns and refreshing the data in OLEDB destination, I don't see any errors or warnings.
But when I start executing the package it throws me the below error.
Error: The output column (4659) does not have a matching source column in the schema.
[SSIS.Pipeline] Error: "component (2861)" failed validation and returned validation status "VS_NEEDSNEWMETADATA".
I need suggestion on this.
Thanks
Veeresh

Hi Veeresh,
As per my understanding, this error happens when the OLE DB Source component cannot find the corresponding source column in the database table. Possible reason is the the column name in the external database table has changed or
the column has been removed.
To verify this issue, please go to the Advanced Editor for OLE DB Source Input and Output Properties tab to see the External columns and Output columns. To fix it, please refresh the data or recreate the Source.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

HideShow: Column does not show label

I have one hideShow region inside table, but it does not show label in column.
Someone know help me?
See the printscreen: http://www.flickr.com/photos/30358105@N03/3180588230/

Hi,
Under the Identification tab, there is a characteristic 0PSTNG_DATE. The corresponding 4th column is for Cube1, but Cube2 contains the posting date we are reporting on through the multiprovider. The third column (Equal To) is NOT checked for Cube2.
Could that be the problem? What is the significance of this checkbox not being checked for Cube2.
On the other hand, I see 0PSTNG_DATE also under the fifth column (Char/NavAttrib), but the corresponding Cube3 and it is checked under Equal To
Characteristic---Long_Description-Equal_To-In_InfoProvider-Char/NavAttrib
0PSTNG_DATEposting dateCube1--
Cube1
Cube2
Cube2
checked---Cube3--
0PSTNG_DATE
Cube3
0FISCPER3-----Posting period---checked----Cube1
checked----Cube2
checked----Cube3
Checked----Cube4
I hope the above info can from the Identification tab guide help?
Can you help interpret these columns and the significance of the fact that there is no checked under Equal To for the Cube2 which is what actually feeds the column, TargetColumn (i.e the column which does not get populated with date when the Posting Date filed is set.
Thanks.

A column does not edit

Similar Messages

Maybe you are looking for