A computerized calling service has been calling my cel all day about acquiring a car loan. They use a different A/C and phone number for each call. Where do I report this harassment?

How do I block harassment from one nuisance computerized advertising company?

Dealing with harrassment can be frustrating, DickA! I can help you stop these calls. Just go to My Verizon, and use the "block calls & messages" feature to block this number for free for 90 days! http://bit.ly/xB4iTc
Thanks,
MichelleH_VZW
Follow us on Twitter @VZWSupport

Similar Messages

My phone has been in recovery mode all day and now it's not even showing up in iTunes. What can I do?

It started this morning when i was syncing it to my iTunes to get some pictrues off of it for class and it said to restore it. I've done restore before so I clicked and went along. But then it didnt work at all and came up with error 14. I shut down my pc and turned it back on, plugged it in and after an hour of syncing it worked. Left, went to class and noticed that none of my music or apps were on my phone so after my class i went and plugged it back in again. Thats when everything went down hill. It said the same things about restoring and what nots so I didnt think anything of it. Everytime I tried again it said it would fail with the error messages as 14,2003, or 3200. Now it's not even showing up in my iTunes when i plug it in. I've tried the advice on here but nothing seems to work. Does anyone have any ideas?

Hi Eri-kun,
Welcome to the Support Communities! The article below will help you troubleshoot the issue you are having syncing your iPhone with iTunes:
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
If you can't update or restore your iOS device
http://support.apple.com/kb/ht1808
I hope this information helps ....
- Judy

I love Firefox, but recently it has been crashing multiple times per day (sometimes 20 or more). I've checked the web help, and can't resolve. Please help.

I have Windows 7 and Firefox 7.0.1, and those two combined have caused a crashing epidemic. I do not have many add-ons installed, and the ones I do have are all updated. I also did not see the crashing coincide with a recent download or install. I've checked all the online help, and nothing has provided resolution. If someone could assist that would be great. I do not want to be forced in to using another browser.

Here are the crash report links. Let me know if you need anything else. Thanks for your help!<br />
<br />
<pre><nowiki>bp-f9fa69c3-443a-41ff-a8fb-1084c2111018 10/18/20118:58 PM
bp-c7364ed9-228d-4a2e-8ebc-54f38211101810/18/201111:15 AM
bp-6bf58193-10b0-4c5a-a718-17f71211101710/17/201112:46 PM
bp-910db163-1bd5-45e6-9bd9-76d62211101710/17/201112:45 PM
bp-19258217-74c7-4593-b787-b909a211101710/17/201110:23 AM
bp-8e17c841-efc8-4338-8e1b-facbe211101710/17/201110:00 AM
bp-ba3d032d-7541-473f-b9a5-f6df3211101710/17/20119:33 AM
bp-a56acd57-8a47-4d3d-9f28-572d9211101710/17/20119:32 AM
bp-06c033fc-f65a-4c57-9547-88940211101710/17/20118:47 AM
bp-eed15ff5-b3c1-4790-9dc9-de7db211101710/17/20118:40 AM
bp-3be7f3e5-40e7-42fd-91b1-8a38e211101710/17/20118:21 AM
bp-5a4d1363-5d1d-40df-b25c-d6a3b211101710/17/20118:20 AM</nowiki></pre>

I just got a notification that the phone of somebody I don't want on my imessage account, has been added to my account. how do i double check that they are indeed on my account, and then remove them?

I just got a message on my computer and my phone that an ex girlfriend of mine's phone was just added to my imessage account. For obvious reasons, I'm not okay with that. I just messaged her on facebook and double checked if the name of the phone sent to me is the label of her phone, and it was. She then sent me a screen shot of her phone's imessage settings page though saying that its only connected to her account. I dont believe that she is lying to to me, but I dont believe my computer is either. Is there a way I can double check what devices are linked to my accccount and remove one if need be?

Hi Connor,
The only "accounts" on iMessage are the accounts you have set up. Open iMessage, from the top toolbar click on Messages>Preferences>Accounts
There you will see what accounts are set up on your iMessage app. If your ex-girlfriend is still set up in your Contacts, you may want to remove her from there.
Cheers,
GB

There has been no signal in Springdale, UT for hours today. there is no way to contact Verizon (Calling or Web Chat). Service has been deteriorating for the past two years in the area. Worse fact is no one at the company seems to care. Right now the immed

There has been no signal in Springdale, UT for hours today. there is no way to contact Verizon (Calling or Web Chat). Service has been deteriorating for the past two years in the area. Worse fact is no one at the company seems to care. Right now the immediate issue is no service. I cannot do business this way.

You used the data. Verizon can not see what it was sued for. However your phone can see whats apps used the data. go to settings-data usage- there will be a place that says data usage cycle. line the dates up with your cycle. then there will be a bar graph below that extend bother white bars one all the way to the left and one all the way to the right. after those are extended below that will be a list of apps, there should be one that used over 2 gb and that will show you what app used that data in her purse

My service has been shut off 11 days early fix this please

My service has been shut off 11 days early I am considering to change my carrier please fix ASAP

From Verizon's Contact Page:
Customer Service
(800) 922-0204
or dial *611 from your mobile phone
View the *611 On-Screen App for Android Video
6 AM - 11 PM, Mon - Sun
Emergency Service Hours
11 PM - 6 AM, Mon - Sun

Service has been cancelled

This has given me a headache….
11 Months ago I cancelled my bt vision service due to my Freeview signal not been good enough... I received a pre-paid package from BT to send it back, which I did.
Fast forward 6 months, I realised I was still being charged for BT vision when I moved house, fair enough, rung the call centre “ yes sir I do apologise for this we will make sure this is rectified “
2 Weeks ago I realised that it is still going on, so I called the contact centre bouncing around from department to department, having the phone hung up every time I tried to speak to a senior member of the team, I finally got through to someone after 2 hours. They advised me that this will be resolved and a refund of £137.50 would be credited to my account. I had stated I would not pay my bill because I am owed this, when it is credited they can post the credit to the account. 1 day later my phone and broadband are suspended. So I make the call again… after 2 and a half hours of department hopping I get through to the BT vision billing department explain what has happened for what felt like the 100th time, to be told there’s not a lot they can do. They reorder the Vision account to be cancelled; they manually reactivate my connection, Great! But the credit I will need to speak to a supervisor “I will be transferred “ I am told… 45 minutes holding I look at the clock.. 8:00pm and unsurprisingly the line goes dead and all the helpful little call centre bees strudel off home.
Next day after laying in be contemplating turning Amish just due to convenience really, I head off to work.. Not before checking my emails before I leave.. But what’s this ahh my service has been stopped again WOO! So I get home from work.. I make the call again Blah Blah Blah wrong department, another person blah blah blah.. That’s the summery of an hour and a half. I hang up to go and eat... Ring back get through to a helpful gentleman, who says they will re cancel my vision because it doesn’t look like it’s been done and restart my service... and get the credit issued. Brilliant
So happy as can be problem seems to be sorted.. But waiiiit Tuesday morning I wake up get some breakfast get dressed, check my email before work it’s still working. 9am my phone goes it’s the wife my head thinks ack did I leave the loo seat up or something. No no BT have cut off our phone and internet... But not even the friendly cut off where I can still ring them from the landline... Full account cancellation. Sighhhh
So home from work hi to the wife, hi to the kid.. back on the phone to my bit on the side good ole’ BT. Department bouncing, we cant help you, blah blah blah, cut off, ring back etc etc. Finnaly I get through to a lovely lady in Sunderland who is nice as pie, she’s going to help me..we go onto a conference call with a manager somewhere.. the helpful soul who I spoke to on Friday put a cancellation on for my whole account.. and also there’s 12 cancellation order’s pending for my BT vision account. To get it sorted it’s going to take a day.
So I rang back yesterday got through to a call centre obviously not in Sunderland.. apparently they can’t transfer me to the helpful Mackem team but alas she is able to email them and asked them to call be back within half hour. So that was 19 hours ago. I’ve been without a stable service for 2 weeks, your chucking more and more late charges on and a cancellation fee. What I may do is charge you a late cancellation fee of 11 months plus the 24+ hours total I’ve been on the phone to you (of which I’ve probably only spoke to a human for 2 hours) So either someone fixes this shocking customer service or I am going to become Amish.

Hi RjMaJay,
Did you contact the BT Care Team (Mods) as suggested in ChristopherP post?
ChristopherP is one of the BT Care Team (Mods)
If you haven't contacted the BT Care Team (Mods) then you can by clicking on the link below.
Contact BT Care Team
The BT Care Team are a BT UK Based specialist team who have a good reputation for solving customer problems.
Once contacting them they will reply either by phone or email usually within 3 working days, however you will be given a tracking number immediately after sending the request. Please take note of this.
It may also be best to not ring the general helpdesk number once waiting for the BT Care Team to contact you, as it can sometimes confuse matters.
cheers
jac_95 | BT.com Help Site | BT Service Status
Someone Solved Your Question?
Please let other members know by clicking on ’Mark as Accepted Solution’
Try a Search
See if someone in the community had the same problem and how they got it resolved.

Service has been great for a week - ping loss afte...

Hi,
I've recently switched from virgin media and I must say the service has been amazing so far. The ping times are far more reliable and there is absolutely no jitter on the line what so ever.
A few days ago the internet disconnected for an hour or 2 at around 1am. It wouldn't come back on after rebooting the router (the one that connects to the phone socket) a couple of times so I just called it a night and it was working again in the morning. I'm not sure if this has anything to do with the problems I've been having but lately I've been noticing packet loss on the line in the evenings / early hours of the morning, as evidenced by this TBB graph:
http://www.thinkbroadband.com/ping/share/0f41cf302992a582e75f9e9f9b410a75-13-04-2013.html
The spikes are very intermittent and last only for a second or 2 before returning to normal but it's wreaking havoc with trying to game on it. A normal ping-test shows a good connection:
http://www.pingtest.net/result/79789653.png
There's also times where the average ping will spike up to 100-200ms for a couple of minutes and then return to normal.
Please help! I've been very happy with my connection so far. I am not using the router supplied from BT but instead am using an Asus N66U which is quite new. The router is known to work perfectly and I've been rebooting both boxes to try and resolve connection issues.
Edit: Just gave everything another power cycle. The connection went from this:
http://www.thinkbroadband.com/ping/share/0f41cf302992a582e75f9e9f9b410a75-13-04-2013.html
To this:
http://www.thinkbroadband.com/ping/share/576c8e4182cc4fe33e35a7bef969207c-13-04-2013.html
The only difference I can see is ping times are a little higher, but the connection for the hour or so it's been on looks absolutely solid instantly after a restart. What could be causing this issue?

Hi David,
Thanks for the reply. I couldn't find a reply e-mail address or anywhere to login to reply, so I sent the email to forum.moderation.team email. Just incase that's the wrong thing to do, I'll post what I said below:
The speeds I'm getting are fine - many sites are reporting 38mbit down and ~8mbit up which is what I expect from the connection.
For the past few days the connection has been good, as you can see by the TBB graph here:
http://www.thinkbroadband.com/ping/share/efadfec0b36f986da8f5aaf592db0b43-21-04-2013.html
There were tiny blips of packet loss at 2pm and 6pm but nothing major.
The problem is that there appears to be random blips of latency throughout the day, even at early hours of the morning as you can see here:
http://www.thinkbroadband.com/ping/share/4a10c0e969e6a5f3f72644516cb7526b-16-04-2013.html
On this graph the spikes started just before 12am.
The spikes themselves aren't major and only last for a few seconds, but it's very annoying if I or anyone in the house is using the connection for gaming at the time.
The has been a couple of nights (namely about a week after installation) that the connection has been absolutely horrendous - see the graph in the original enquiry (http://www.thinkbroadband.com/ping/share/0a49bc6365c0c2cac05c3137b03e118d-14-04-2013.html) that when I reset the modem going into the telephone box the connection will return to perfect again instantly.
There's nothing more I can tell you really, except that the connection is generally perfect apart from these little blips of packet loss.
Thanks,
Stephen
edit:
Here's a graph from yesterday, you can still see tiny blips of packet loss:
http://www.thinkbroadband.com/ping/share/7795608ce27a576e2a182049bbcf5ff8-20-04-2013.html

WAE 512 - ver 4.1.5b.7 - nodemgr: The device_mgr service has been disabled.

Hi
I have restarted the WAE and now I've this message:
The device_mgr service has been disabled.
here is message from CLI:
ASERVER-53#sh alarms
Critical Alarms:
     Alarm ID             Module/Submodule     Instance
   1 svcdisabled          nodemgr              device_mgr
Major Alarms:
None
Minor Alarms:
None
Is it possible to try manualy enable this service ? (After next restart I have the same message).
If you need any additional logs please let me know.
Thanks you in advance for your help.
James

James,
I found following exception thrown:
com.actona.services.configuration.MgException: TimePeriod is not time because it doesn't consist of 'time' element
    at com.actona.services.configuration.MBeanConfigAttribute.objectFromXML(MBeanConfigAttribute.java:158)
    at com.actona.services.configuration.MBeanConfigAttribute.(MBeanConfigAttribute.java:52)
    at com.actona.services.configuration.MBeanConfig.getAttributesFromXML(MBeanConfig.java:118)
    at com.actona.services.configuration.MBeanConfig.(MBeanConfig.java:39)
    at com.actona.services.configuration.ApplicationConfig.loadConfiguration(ApplicationConfig.java:182)
    at com.actona.services.configuration.ApplicationConfig.(ApplicationConfig.java:55)
    at com.actona.services.configuration.Configurator.(Configurator.java:47)
    at com.actona.services.Loader.(Loader.java:82)
    at com.actona.services.Server.(Server.java:65)
    at com.actona.services.Server.init(Server.java:170)
    at com.actona.services.Server.main(Server.java:231)
[FATAL] 2011-01-12 14:05:52 UTC - Server: Caught MgException - com.actona.services.configuration.MgException: TimePeriod is not time because it doesn't consist of 'time' element
Nested exception: TimePeriod is not time because it doesn't consist of 'time' element
com.actona.services.configuration.MBeanConfigAttribute.objectFromXML(MBeanConfigAttribute.java:158)
com.actona.services.configuration.MBeanConfigAttribute.(MBeanConfigAttribute.java:52)
com.actona.services.configuration.MBeanConfig.getAttributesFromXML(MBeanConfig.java:118)
com.actona.services.configuration.MBeanConfig.(MBeanConfig.java:39)
com.actona.services.configuration.ApplicationConfig.loadConfiguration(ApplicationConfig.java:182)
com.actona.services.configuration.ApplicationConfig.(ApplicationConfig.java:55)
com.actona.services.configuration.Configurator.(Configurator.java:47)
com.actona.services.Loader.(Loader.java:82)
com.actona.services.Server.(Server.java:65)
com.actona.services.Server.init(Server.java:170)
com.actona.services.Server.main(Server.java:231)
A quick look in our database and I THINK I found the answer for you.
I found a previous case where under rare circumstances an XML would become corrupted and solution was to run a script.
I'm actually not sure if I'm supposed to provide you with the script (there's always quite a few concerns with this), but I'm going to risk it.
However you can only run the script at your own risk and if it goes wrong please reimage the device.
Regarding CM and how devices are recongnized, forgive my inoreance but I believe it was in part mac address (or something else imprinted into device) of device, but can't remember for sure, nor have the time to look for it.
HTH,
Marcin

Microsoft Project Server Event/Queue Services has been disable

Hi after update Service pack 2 and December 2013 CU,Microsoft Project Server Event/Queue Services has been disable . I have manually change and start but after some time again same thing happen.
Kinldy let me know the process hwo to resolve this issue.
I have fallow the below link but this is not impactable on my envirnment.
http://blogs.technet.com/b/projectsupport/archive/2012/12/26/project-server-2010-my-queue-service-keeps-getting-disabled.aspx
Help is appricable.
Hasan Jamal Siddiqui(MCTS,MCPD,ITIL@V3),Sharepoint and EPM Consultant,TCS
|
| Twitter

Hi Muelder,
Yes share point Project Appl service is enabled.
Now i have resolved issue with the help of below script.
((Get-SPFarm).Services | ? {$_.Name -match "ProjectQueueService14"}).Instances | % {$_.Id} | Stop-SPServiceInstance -Confirm:$false -Verbose;
((Get-SPFarm).Services | ? {$_.Name -match "ProjectEventService14"}).Instances | % {$_.Id} | Stop-SPServiceInstance -Confirm:$false -Verbose;
((Get-SPFarm).Services | ? {$_.Name -match "ProjectQueueService14"}).Instances | % {$_.Id} | Start-SPServiceInstance -Confirm:$false -Verbose;
((Get-SPFarm).Services | ? {$_.Name -match "ProjectEventService14"}).Instances | % {$_.Id} | Start-SPServiceInstance -Confirm:$false -Verbose;
((Get-SPFarm).Services | ? {$_.Name -match "ProjectQueueService14"}).Instances | ft -AutoSize
((Get-SPFarm).Services | ? {$_.Name -match "ProjectEventService14"}).Instances | ft -AutoSize
Hasan Jamal Siddiqui(MCTS,MCPD,ITIL@V3),Sharepoint and EPM Consultant,TCS
|
| Twitter

The bonjour service has been disabled. Re-enable the bonjour service

The bonjour service has been disabled. Bonjour is required to share music with others. Please re-enable the service to use this feature. How do I fix this on my iTunes?

Hello, dkm.
Thank you for visiting Apple Support Communities.
Here are the steps I would recommend going through when receiving this error.
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Cheers,
Jason H.

HT3529 I am in Chinese, but somehow I could not send text message to UK or US now, but could call Uk and US phone number successfully. Is there anyone could help this, thanks!!!

I am using iphone 4, and upgraded the system to IOS6 already. but I found I could not send test message to UK and US, I could call phone number in UK or US successfully. Could someone to help me to fix up this issue. I guess the problem probably came from the format of UK or US phone number in my Iphone address book. Due there is some blank space between the phone number for iphone phone number format. I ever try andro phone, no blank space there, so could send test message to UK and UK without problem.

Hi Iansally,
I can take at the billing of your account. Please can you send me in your details using the link found in the "About Me" section of my profile?
Thanks
PaddyB
BTCare Community Mod
If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
We are sorry but we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-)

Service has been terminated - java.lang.RuntimeException:

heard that when a member is thrown out of the cluster we get the above error..want to know the cause why a (storage disabled member weblogic server)member is thrown out of the cluster..i get the below message in the coherence server logs.can some one provide me thier thoughts
2009-04-20 07:03:54,098 Coherence Logger@9233868 3.4.2/411 WARN 2009-04-20 07:03:54.096/240106.883 Oracle Coherence GE 3.4.2/411 <Warning> (thread=Cluster, member=28): The member formerly known as Member(Id=5, Timestamp=2009-04-20 07:03:53.944, Address=xxxxx, MachineId=5599, Location=machine:something,process:6313, Role=WeblogicServer) has been forcefully evicted from the cluster, but continues to emit a cluster heartbeat; henceforth, the member will be shunned and its messages will be ignored.

Patrick,
i got the below error again even after increasing the timeout <timeout-milliseconds>120000</timeout-milliseconds>.But the notifiable thing is that we are not getting any msg in the coherence server logs like the particular node has got evicted from the cluster. Also want to know other than GC pause what else can be the cause..?
2009-05-11 13:41:03,562), server71, c340-s1, customerinquiry, ERROR, statedatamgr.uofactory.statedaemonmgr.StateDataManagerCoherence, (Mjfalco200905110139081002), (*Service has been terminated-java.lang.RuntimeException: Service has been terminated*
     at com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.DistributedCache$BinaryMap.onMissingStorage(DistributedCache.CDB:9)
     at com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.DistributedCache$BinaryMap.ensureRequestTarget(DistributedCache.CDB:34)
     at com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.DistributedCache$BinaryMap.addMapListener(DistributedCache.CDB:49)
     at com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.DistributedCache$ViewMap.addMapListener(DistributedCache.CDB:1)
     at com.tangosol.coherence.component.util.SafeNamedCache.addMapListener(SafeNamedCache.CDB:27)
     at com.tangosol.net.cache.CachingMap.registerListener(CachingMap.java:1473)
     at com.tangosol.net.cache.CachingMap.get(CachingMap.java:485)
Thanks

Non stock items - services has been confirmed

Hi
I want to sell non stock items. for which item cat group - NLAG, item category is TAX. While in sales order when you enter item & quantity system automaically confirm the quantity that can be seen in item details i.e Schedule line tab.
( As per information, delivery and PGI can be done only difference is in standard cycle PGI will be done but incase of non stock system issue a message that services has been confirmed.)
BUT i am not able to create delivery also system tells No delivery relevant item.
Provided i hv maintained propere copy control. Please advice. I want to know system message ie confirmation of services
Regards,
Veeresh

create a material master of type UNBW (non valuated material) then create a movement 202 to write on stock.

HT201274 how to erase iphone 4s after service has been terminated

how to erase iPhone 4s content after service has been terminated

Man I don't know what else you can do.
you can log into icloud.com, but you can't erase the phone, because you aren't connected to wifi or cellular data.

A computerized calling service has been calling my cel all day about acquiring a car loan. They use a different A/C and phone number for each call. Where do I report this harassment?

Similar Messages

Maybe you are looking for