WAE 512 - ver 4.1.5b.7 - nodemgr: The device_mgr service has been disabled.

Hi
I have restarted the WAE and now I've this message:
The device_mgr service has been disabled.
here is message from CLI:
ASERVER-53#sh alarms
Critical Alarms:
Alarm ID Module/Submodule Instance
1 svcdisabled nodemgr device_mgr
Major Alarms:
None
Minor Alarms:
None
Is it possible to try manualy enable this service ? (After next restart I have the same message).
If you need any additional logs please let me know.
Thanks you in advance for your help.
James

James,
I found following exception thrown:
com.actona.services.configuration.MgException: TimePeriod is not time because it doesn't consist of 'time' element
    at com.actona.services.configuration.MBeanConfigAttribute.objectFromXML(MBeanConfigAttribute.java:158)
    at com.actona.services.configuration.MBeanConfigAttribute.(MBeanConfigAttribute.java:52)
    at com.actona.services.configuration.MBeanConfig.getAttributesFromXML(MBeanConfig.java:118)
    at com.actona.services.configuration.MBeanConfig.(MBeanConfig.java:39)
    at com.actona.services.configuration.ApplicationConfig.loadConfiguration(ApplicationConfig.java:182)
    at com.actona.services.configuration.ApplicationConfig.(ApplicationConfig.java:55)
    at com.actona.services.configuration.Configurator.(Configurator.java:47)
    at com.actona.services.Loader.(Loader.java:82)
    at com.actona.services.Server.(Server.java:65)
    at com.actona.services.Server.init(Server.java:170)
    at com.actona.services.Server.main(Server.java:231)
[FATAL] 2011-01-12 14:05:52 UTC - Server: Caught MgException - com.actona.services.configuration.MgException: TimePeriod is not time because it doesn't consist of 'time' element
Nested exception: TimePeriod is not time because it doesn't consist of 'time' element
com.actona.services.configuration.MBeanConfigAttribute.objectFromXML(MBeanConfigAttribute.java:158)
com.actona.services.configuration.MBeanConfigAttribute.(MBeanConfigAttribute.java:52)
com.actona.services.configuration.MBeanConfig.getAttributesFromXML(MBeanConfig.java:118)
com.actona.services.configuration.MBeanConfig.(MBeanConfig.java:39)
com.actona.services.configuration.ApplicationConfig.loadConfiguration(ApplicationConfig.java:182)
com.actona.services.configuration.ApplicationConfig.(ApplicationConfig.java:55)
com.actona.services.configuration.Configurator.(Configurator.java:47)
com.actona.services.Loader.(Loader.java:82)
com.actona.services.Server.(Server.java:65)
com.actona.services.Server.init(Server.java:170)
com.actona.services.Server.main(Server.java:231)
A quick look in our database and I THINK I found the answer for you.
I found a previous case where under rare circumstances an XML would become corrupted and solution was to run a script.
I'm actually not sure if I'm supposed to provide you with the script (there's always quite a few concerns with this), but I'm going to risk it.
However you can only run the script at your own risk and if it goes wrong please reimage the device.
Regarding CM and how devices are recongnized, forgive my inoreance but I believe it was in part mac address (or something else imprinted into device) of device, but can't remember for sure, nor have the time to look for it.
HTH,
Marcin

Similar Messages

WAE 512 and problem with services

Hi
I have few WAE 512 installed in my network. Every use 4.1.5b software. I have problem with one. I have upgraded it from CD and after that I see below alarms:
Directy after WAE restart appear:
Major: DRE (DRE+LZ) initialization failed: <>
after about 15 minutes other alarms appear:
Critical: nodemgr: The wafs_edge service has been disabled.
Critical: Edge is down.
Do you know where should I look for a problem source ?
Thanks in advance
James

Hi
Here you are the outpu:
ps. after 3 days these alarms disapeard. When I've restarted WAE alarm appeared and after 3 days desapered again....
Physical disk information:
disk00: Present    5QD39305   (h02 c00 i00 l00 - Int DAS-SATA)
          715402MB(698.6GB)
disk01: Present    5QD392VR   (h02 c00 i01 l00 - Int DAS-SATA)
          715402MB(698.6GB)
Mounted file systems:
MOUNT POINT      TYPE       DEVICE                SIZE     INUSE      FREE USE%
/sw              internal   /dev/md0             991MB     914MB      77MB 92%
/swstore         internal   /dev/md1             991MB     880MB     111MB 88%
/state           internal   /dev/md2            5951MB     256MB    5695MB   4%
/local/local1    SYSFS      /dev/md5           14878MB    1277MB   13601MB   8%
/disk00-04       CONTENT    /dev/md4          668196MB 119653MB 548543MB 17%
.../local1/spool PRINTSPOOL /dev/md6             991MB      16MB     975MB   1%
Software RAID devices:
DEVICE NAME TYPE     STATUS                PHYSICAL DEVICES AND STATUS
/dev/md0     RAID-1   NORMAL OPERATION      disk00/00[GOOD] disk01/00[GOOD]
/dev/md1     RAID-1   NORMAL OPERATION      disk00/01[GOOD] disk01/01[GOOD]
/dev/md2     RAID-1   NORMAL OPERATION      disk00/02[GOOD] disk01/02[GOOD]
/dev/md3     RAID-1   NORMAL OPERATION      disk00/03[GOOD] disk01/03[GOOD]
/dev/md4     RAID-1   NORMAL OPERATION      disk00/04[GOOD] disk01/04[GOOD]
/dev/md5     RAID-1   NORMAL OPERATION      disk00/05[GOOD] disk01/05[GOOD]
/dev/md6     RAID-1   NORMAL OPERATION      disk00/06[GOOD] disk01/06[GOOD]
Disk encryption feature is disabled.
regards
James

WAE 512 and transaction logs problem

Hi guys,
I have a WAE 512 with ACNS 5.5.1b7 and I'm not able to export archived logs correctly. I tried to configure the WAE as below:
transaction-logs enable
transaction-logs archive interval every-day at 23:00
transaction-logs export enable
transaction-logs export interval every-day at 23:30
transaction-logs export ftp-server 10.253.8.125 cache **** .
and the WAE exported only one file of about 9 MB even if the files was stored on the WAE as you can see from the output:
Transaction log configuration:
Logging is enabled.
End user identity is visible.
File markers are disabled.
Archive interval: every-day at 23:00 local time
Maximum size of archive file: 2000000 KB
Log File format is squid.
Windows domain is not logged with the authenticated username
Exporting files to ftp servers is enabled.
File compression is disabled.
Export interval: every-day at 23:30 local time
server type username directory
10.253.8.125 ftp cache .
HTTP Caching Proxy logging to remote syslog host is disabled.
Remote syslog host is not configured.
Facility is the default "*" which is "user".
Log HTTP request authentication failures with auth server to remote syslog host.
HTTP Caching Proxy Transaction Log File Info
Working Log file - size : 96677381
age: 44278
Archive Log file - celog_213.175.3.19_20070420_210000.txt size: 125899771
Archive Log file - celog_213.175.3.19_20070422_210000.txt size: 298115568
Archive Log file - celog_213.175.3.19_20070421_210000.txt size: 111721404
I made a test and I configured the archiveng every hour from 12:00 to 15:00 and the export at 15:10, the file trasnferred by the WAE was only three one of 12:00 the other of 13:00 and 14:00 the 15:00 has been missed.
What can I do?
Thx
davide

Hi Davide,
You seem to be missing the path on the FTP server; which goes on the export command.
Disable transaction logs, then remove the export command and then add it again like this: transaction-logs export ftp-server 10.253.8.125 cache **** / ; after that enable transaction logs again and test it.
Let me know how it goes. Thanks!
Jose Quesada.

WAVE-274-K9 and WAE-512-K9 as CM ?

1) Can the WAVE-274-K9 device be configured as a WAAS Central Manager off-the-shelf ?
2) Same for WAE-512-K9 device ?
regards,
Geert

Geert,
For the CM functionality in WAAS 4.1.x, you need the enterprise license installed, then you can configure the CM role on the device.
274 can support around 125 WAEs
512-1GB can support 500 WAEs
512-2GB can support 1000 WAEs.
Hope that helps,
Dan

WAE 512 Error svcdisabled

Error in WAE 512,
PD-WAE login: admin
Password:
No directory /local/local1!
Logging in with home = "/".
System Initialization Finished.
Disk based software not installed.
Some applications may not run correctly!
PD-WAE#
PD-WAE#
PD-WAE#sh alarms
Critical Alarms:
Alarm ID Module/Submodule Instance
1 svcdisabled nodemgr sodre_stats
Major Alarms:
None
Minor Alarms:
None
PD-WAE#show version
Cisco Wide Area Application Services Software (WAAS)
Copyright (c) 1999-2009 by Cisco Systems, Inc.
Cisco Wide Area Application Services Software Release 4.1.3 (build b55 Apr 18 2009)
Version: oe512-4.1.3.55
Compiled 00:13:45 Apr 18 2009 by cnbuild
System was restarted on Sun Oct 9 13:53:40 2011.
The system has been up for 22 hours, 8 minutes, 16 seconds.
PD-WAE#
which will be the solution?

Hi Udom
According to the output you provided, the software is not properly installed, either because it got somehow corrupted, or perhaps because the hard drives are not accessible
PD-WAE login: adminPassword: No directory /local/local1!Logging in with home = "/".System Initialization Finished.Disk based software not installed.Some applications may not run correctly!
Moving forward, the first thing to do would be reinstalling the software with the command "WAE# copy ftp install" if the file is stored remotely or "WAE# install " if the software image is already in the hard drive of the device.
I hope this helps
Daniel

WAAS - WAE-512-K9 - SATA2 250 GB Hard disk not detecting

We had installed new WAE-512-K9 having 2*SATA2 250GB Hard disk as edge box in one of the branch. But during configuration, we have notified that both the hard disks are not getting detected. Both the disks 00 & 01 are inserted in the respective slots as mentioned in the cisco document. Hard disk LEDs are glowing intially when the device boots up, but later there is no LED indication. Please help me in resolving this issue.

Hi Tammy,
The only thing you need is - disk delete-data-partitions once the unit reboots after the memory upgrade. This command re-aligns the CIFS and DRE partition to match with 8GB memory. This command should retain the software and config on the device, only repartition the caching partitions. Not sure what may have went wrong but it seems like at this moment you may want to re-install image using copy ftp install command on WAE. Other than that, your disks look helthy.
Regards.

WAAS Upgrade CM path from 4.4.7 WAE-512 to 5.4 vCM

I have a deployed WAAS system running 4.4.7 and the old WAE hardware is all on the EOL clock or not supporting 5.4 at all. The budge fairies had money at the end of the year so I've got new WAVE boxes and vCM 5.4 DVDs to deploy.
My question is what is the upgrade process for the CMs?
Can I simply spin up two 5.4 vCMs as a secondary CMs to the 4.4.7 primary CM on a WAE-512, then make one the primary? That would assume that a 5.4 secondary could sync to and then take over directly from a 4.4.7 primary. That's the bit that I have doubts about.
Or would I have to start with vCMs at 4.4.7 to get them to sync, then take over as primary and upgrade them? Is there a 4.4.7 vCM image?
If that's a dead end, I saw another discussion about downgrading a WAVE-294. I'm thinking one could be downgraded to 4.4.7, joined as a secondary CM, promoted to primary, and then upgraded as a stepping stone to vCMs at 5.4. Then the '294 would be deployed back as accelerator as originally intended. Any pitfalls with this?
Or is there a simpler path that I'm missing entirely?
Also can anyone confirm that the RJ-45 console ports on the WAVE-*94 have the same pin-out as traditional Cisco switch RJ-45 console ports?
Thanks.

Hi Edward,
For the upgrade process, you'll have to follow this procedure :
http://www.cisco.com/c/en/us/td/docs/app_ntwk_services/waas/waas/v541/release/note/waas541xrn.html#pgfId-171257
So either down grade your vCM to 4.4.7 (this requires that it is a vCM-100 or -2000)
- there probably is a vCM 4.4.7 image out there somewhere, but these could be hard to get.
- or just use the "copy ... install" on your vCM, to get it downgraded.
or use the 294 method (same methodology applies)
But as I see it, there is no need to play around wit ha secondary CM, you don't need the CM to ensure optimization, when things are up and running.
You can easily change a CM to an accellerator by configuration and a reload, unless we're taking vWAAS, where the ova image is locked.
remember to take a backup of your CMS database and place it somewhere else, before starting upgrading.
Best Regards
Finn Poulsen

Clearing out the counters on the WAE 512 interfaces

Can anybody please tell me how to clear the counters on the WAE 512 interfaces?
Thanks..

I know, unfortunately that seems to be the only way.
I will let the product team know and hopefully get this in next release.

Problem upgrading WAE 512 from 4.1.5f to 4.2.3

Hi guys,
I've just upgraded a wae 512 from version 4.1.5f to 4.2.3 using the Rescue CD but after the installation the CLI shows me an error:
No directory /local/local1!
Logging in with home = "/".
System Initialization Finished.
Disk based software not installed.
Some applications may not run correctly!
show version command:
CORE#sh ve
Cisco Wide Area Application Services Software (WAAS)
Copyright (c) 1999-2010 by Cisco Systems, Inc.
Cisco Wide Area Application Services Software Release 4.2.3 (build b7 Jul 29 201
0)
Version: UNKNOWN-PRODUCT-4.2.3.7
Compiled 01:16:47 Jul 29 2010 by damaster
Device Id: 00:14:5e:95:ef:67
System was restarted on Wed Sep 22 15:30:32 2010.
The system has been up for 5 minutes, 37 seconds.
I can't access interface giga and ohter commands neither. I really appreciate your help
Thanks in advance
Lenin

Dear smnambia,
i have problem the Wae 512 RMA can't booting stack at disk-100: disk apply.
and i follow how to use rescue CD
Enter the following option in sequence
2,3,5,8 and 9
for number 2,3,5 is normally,
but when i wipe disk and press yes.
Installer Main Menu:
    1. Configure Network
    2. Manufacture flash
    3. Install flash cookie
    4. Install flash image from network
    5. Install flash image from usb/cdrom
    6. Install flash image from disk
    7. Recreate RAID device (WAE-674/7341/7371/7541/7571/8541 only)
    8. Wipe out disks and install .bin image
    9. Exit (reboot)
Choice [0]: 8
Using cd-rom device (/dev/scd0)
Enter full URL of .bin image to install.
   ftp://[user:pass@]ip_addr/path/to/file
http://[user:pass@]ip_addr/path/to/file
file:/local/path/to/to/file
URL for .bin image [file:/media/images/waas-universal-4.4.1.12-k9.bin]:
Continue? This will wipe out all disks! [n]: y
unmount device (/dev/scd0)
Scro
and nothing happen for a long time. its normal??
how long when we wipe the disk?

WAAS (WAE-512/612) NIC teaming?

Hi,
I've got a customer who wants to know if we can dual-home the WAAS appliances he purchased. Do the WAE-512 or 612's support any type of NIC teaming or active/passive on the NIC's?
Thanks for any help or clarification!
Brad

Brad,
WAAS supports two (2) types of physical interface redundancy:
Standby Interface:
http://www.cisco.com/en/US/partner/products/ps6870/products_configuration_guide_chapter09186a00807bb6f0.html#wp1041450
PortChannel:
http://www.cisco.com/en/US/partner/products/ps6870/products_configuration_guide_chapter09186a00807bb6f0.html#wp1041596
Thanks,
Zach

Minimum bandwidth for wae 512

Does anybody happen to know if there's a minimum bandwidth for the WAE 512 to operate efficiently?
Thanks..

No, there is no "minimum" bandwidth. The WAE-512 will attempt to optimize all traffic that it has a policy for, regardless of the size of the WAN link.

WAE-512-1G Optimized TCP Connections

Hi all,
Regarding the Sizing Capabilities of a WAE-512-1G Appliance, what is the meaning of the "Optimized TCP Connections" ?
Is this parameter related only from the initiated point ? or from both directions?
I'm asking this because, after instaling in inline configuration, a point-to-point circuit only, (2 WAE's + 1 CM), in the Branch WAE we had a Minor Alarm saying that we have reached the TFO Limitation, and on the ohter end, we haven't that alarm.
Most of the traffic(connections), should be from the Branch to the Central Site.
So, the main question is, if this parameter is related to from where the connection is initiated.
Best Regards,
Bruno PetrÃ³nio

The branch Cisco WAE applies a new TCP option (0x21) to the packet if the application is identified for optimization by an application classifier. The branch Cisco WAE adds its device ID and application policy support to the new TCP option field. This option is examined and understood by other Cisco WAEs in the path as the ID and policy fields of the initial Cisco WAE device. The initial ID and policy fields are not altered by another Cisco WAE. The packet is forwarded to the branch router and then to the WAN.
http://www.cisco.com/en/US/docs/solutions/Enterprise/Data_Center/App_Networking/citrixdg_final.html

WAE-512 issue

Dear ,
I have site A and Site B.In site A I have AWe 512 is installed,at site B there is a WAE 512 and WAAS as a CM installed.
All the applications were working fine between site A and site B.All of a sudden applications are not working like RDP,Accessin file server and all not accessible at site A to site B.When I check the connectivity ,it is reachable from site A to site B.
Even telnet from site A to site B to all servers with the port 3389 is connecting.When I check through netstat -an it shows from site A source address to site B destination address to that port 3389 is established.
When mstc to that server is hanging,and \\x.x.x.x\ to remote is not able to open.
Please guide me to resolve.
Regards,

Hi Venkat,
Looking at your issue, are you sure this is WAAS issue? Can you please apply pass thru policy for this traffic and see if it works.
You can also use cli command: show stat conn | in to see if the connection is going thru WAAS and is being optimized. If it shows up as optimized, try putting a pass thru policy for this client and verify the functionality.
Further, is this issue limited to one client / one site / multiple sites? Depending on that you want to focus either on hub site or branch site or single client.
Please also provide us the software version and hardwares you are using at the affected sites.
Feel free to let us know if you think it is WAAS related.
Hope this helps,
Regards.
PS: if this resolves the problem, please mark this as Answered.

WAE-512 - latest software version?

Hi,
I am trying to find out about the latest WAAS software version supported on WAE-512. This product went EOS in May 2011. I am aware that V5 release notes declare that V5 is NOT supported on WAE-512. However, there is no clear statement anywhere on the support web site which WAAS software version is supported - I know that 4.3.x is, but what about V 4.4.x?
Does anybody run V4.4.x on WAE-512 (ideally used as Central manager) or is there any other confirmation that WAE 512 can be upgrade from V.4.3 to V4.4?
many thanks
Rainer Feil

If you have TAC support on your 512s, you can request version 4.5.1, they will make you fill out 20 or so pages documenting your network before they allow you to download it. 4.5.1 has the Citrix acceleration built in, and the better default policy set.
I had 512s running version 4.4.7 before 5.0.1 came out and they ran with no issues. I upgraded to 674s in 3 locations when 5.0.1 came out to get the Citrix acceleration piece. The 512s can not run 5.0.1.
If you plan on upgrading to 4.5.1, do not upgrade past 4.4.5, or you will have to downgrade before upgrading to 4.5.1
Highest level you can go to on 512 - 4.5.1:
http://www.cisco.com/en/US/docs/app_ntwk_services/waas/waas/v451/release/notes/ws451xrn.html

WAE-512 unable to register on Central Manager

Dear friends,
I'm trying to register a WAE appliance on my lab environment and I'm getting following output (from "debug cms"):
WAE2(config)#cms enable
2005 Jul 5 06:08:00 WAE2 config: %WAAS-PARSER-6-350232: CLI_LOG log_cli_command: cms enable
2005 Jul 5 06:08:01 WAE2 perl: %WAAS-CMS-6-700001: configuration properties from database are not set in dataserver
2005 Jul 5 06:08:01 WAE2 perl: %WAAS-CMS-6-700001: configuration properties from database are not set in dataserver
2005 Jul 5 06:08:05 WAE2 perl: %WAAS-CMS-6-700001: Node tv out type is not set, setting to `none'
2005 Jul 5 06:08:05 WAE2 perl: %WAAS-CMS-6-700001: Registering WAAS Application Engine...
Registering WAAS Application Engine...
2005 Jul 5 06:08:06 WAE2 java: %WAAS-CMS-6-700001: register(main): Sending device registration request to Central Manager with address 10.20.15.100
Sending device registration request to Central Manager with address 10.20.15.100
2005 Jul 5 06:08:35 WAE2 exec_license: %WAAS-CLI-5-170098: The License Transport has not been purchased.
2005 Jul 5 06:08:35 WAE2 Sysmon: %WAAS-SYSMON-5-445011: Fault cleared: WAAS product license is missing.
2005 Jul 5 06:11:40 WAE2 exec_license: %WAAS-CLI-5-170098: The License Transport has not been purchased.
Failed to contact CDM 10.20.15.100(Unmarshaled: 9001). Please check connectivity with CDM device and status of management service on CDM.
2005 Jul 5 06:13:56 WAE2 perl: %WAAS-CMS-0-700001: Registration failed(512).
register: Registration failed(512).
2005 Jul 5 06:13:56 WAE2 perl: %WAAS-CMS-0-700001: unable to register node
cms: unable to register node
FAILED to enable management services
2005 Jul 5 06:14:23 WAE2 config: %WAAS-PARSER-6-350232: CLI_LOG log_cli_command: end
WAE2#sh license
2005 Jul 5 06:14:26 WAE2 -admin-shell: %WAAS-PARSER-6-350232: CLI_LOG log_cli_command: sh license
License Name   Status      Activation Date Activated By
Transport      not active
Enterprise     active      07/05/2005      admin
Video          not active
I know clock is wrong. CM address is correctly configured and I can ping it from the application accelerator. WCCP config (on router and on appliance) is done as well.
Do you have any tips to solve this issue?

hello Mauricio,
try the following:
from the WAE not registering:
1-Make sure you configure the default gateway on the WAE
2-on the CLI enter the following commands in the same order, not all at once give it a few seconds between line and line:
-ip path-mtu-discovery enable
-no cms enable
-cms deregister force
-cms enable
3- if still the same please open a case with TAC so they can get the sysreport from the unit.
Regards,
Felix

WAE 512 - ver 4.1.5b.7 - nodemgr: The device_mgr service has been disabled.

Similar Messages

Maybe you are looking for